Smarfid Security Equipment MD3828N Magic MINI DesFire Reader User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3614727
Application ID	kL6rzzmgM8QP3qDV0K2WiA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.99kB (737365 bits)
Date Submitted	2017-10-24 00:00:00
Date Available	2017-10-24 00:00:00
Creation Date	2017-10-20 17:16:07
Document Lastmod	2017-10-20 17:16:07
Document Title	User Manual
Document Creator	WPS Office
Document Author:	Bernard Chiang

Available Later!
DesFire EV1 Magic Series Reader
Design & Technologies
Read full 56 bits UID, Application & Files
Tamper protection
content of DesFire EV1 card.
Support 3DES & AES encrypted
communication between the reader and card.
Support on-site Reader Configuration Card to
change certain parameters.
Number pad use “touching sensor”, the latest
Front plate customization and back lit design is
available.
Design with End User logo is possible.
Door Bell function for Number pad reader.
technology and individual number backlit when
touch.
Economical Mini Magic can be mullion mount.
Display Magic can provide customer a full
OLED Display allow user to see the message
series of choices
clearly under direct sunlight.
Display reader can display CSN/UID number or
A PIN can be set inside the card to authenticate
Programmed Card Number or user Name when
with the reader so that “Card + PIN” mode can
the user card is present.* (Supported Multiple
be implemented without relying on the
Languages)
controller.*
Friendly Installation
“Touch” number pad does not
Universal back plate allows
carry any moving parts, which
the reader be installed on
Reverse power protection.
implies more durable.
different size of gang box.
接保护
All weather proof design with
Non-drop bottom screw made
Stainless steel Security
IP65 certificate.
servicing handier.
screw is an option
Metal back plate allows the
All input and output signals are
reader install on metal surface
protected against static
and back-to back without
charges.
affecting the read range.
和输出信号受到防静电保护
All inputs are 12Vdc
protected.
Model Number: X1 X2 N1 N2 N3 – N4 X3
RF Technologies
Reader Appearance and Function
N1
N2
X1 X2
MD = DesFire Technology
N3
N4
X3
Model
Functions
Standard & Mini Reader
3 = Normal Reader ; 5 = Display Reader
2 = Normal Size
8 = Mini Size
2 = Read UID / Card Number
3 = Sector reading (Only Mifare)
3 = Terminal (for Display Reader)
8 = Pigtail
N = No Number pad; K = Number pad
Keypad Reader
Display Reader
Configurable Functions
Re-configure Window
5 seconds (Default) or Half an hour after Power up
Reader Output Format
CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID
Wiegand Plus Width
Keypad Output
Different choices to fit with different Controller’s requirements
N/A
Buzzer Control
LED/Back lit Control
Display Clock
Synchronization.
Definable
Definable
Reader & Controller control (Default) or Controller control only
Define different LED color response base on Green LED
N/A
N/A
N/A

H/W reset

Via RS485 TimeSyn S/W
Technical Specifications
Typical Read range
2 – 3 cm
Reader Standard Output
Wiegand (RS232 & RS485 optional)
Standard Keypad output
N/A
Wiegand with 4 bits burst
Wiegand with 4 bits burst
Display
N/A
N/A
OLED Display

Display Message
Wiring Distance
N/A
Denied, Enter PIN;
N/A
150m (22 AWG with shielded cable)
Operating Specification:
Operating Voltage
10 - 15VDC
Operating Current
150mA (max)
Operating Temperature
-30℃-70℃
Exterior dimension (Mini)
84.05*54.05*16.5mm
Case material
Standard Color
Operating Humidity
Weight (Mini)
Access Granted, Access
PC+ABS
Black
10% - 90%
160g

Time;

Card Number
120m (22 AWG with shielded cable)
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 3
Author                          : Bernard Chiang
Comments                        : 
Company                         : 
Create Date                     : 2017:10:20 17:16:07+09:16
Creator                         : WPS Office
Modify Date                     : 2017:10:20 17:16:07+09:16
Producer                        : 
Source Modified                 : D:20171020171607+09'16'
Subject                         : 
Title                           : 
Trapped                         : false

EXIF Metadata provided by EXIF.tools