Smarfid Security Equipment SSLE35 Slender Series Legic Redder User Manual

Shanghai Smarfid Security Equipment Co, Ltd. Slender Series Legic Redder Users Manual

Users Manual

Design & Technologies Number pad use “touching sensor”, the latest technology and individual number backlit when touch.Economical mullion mounts type. Support on-site Reader Configuration Card to change certain parameters. Door Bell function for Number pad reader. Tamper protection Design with customer logo is possible. Mifare & ISO14443A-4 UID Slender Series Reader A PIN can be set inside the card to authenticate with the reader so that “Card + PIN” mode can be implemented without Easily see under dark environment. Could be use as a door location Friendly Installation “Touch” number pad does not carry any moving parts, which implies more durable. All weather proof design with IP65 certificate. Universal back plate allows the reader be installed on different size of gang box. Non-drop bottom screw made servicing handier. All input and output signals are protected against static charges. Reverse power protection. Stainless steel Security screw is an option All inputs are 12Vdc protected. Read both CSN and Sector of Mifare card and FULL UID of Mifare Plus and DesFire card.
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authorityto operate the equipment. Model Number: X1 X2 N1 N2 N3 – N4 X3 RF Technologies Reader Appearance and Function X1X2 MW = Mifare + Mifare UID + DesFire UID N13 = Normal Reader N25 = Normal Reader N32 = Read UID / Card Number 3 = Reader Sector (HF Only) N48 = Pigtail X3N = No Number pad; K = Number pad
Operating Specification:: Model Functions Standard Reader Keypad Reader Configurable Functions Re-configure Window 5 seconds (Default) or Half an hour after Power up Reader Output Format CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID Wiegand Plus Width Different choices to fit with different Controller’s requirements Keypad Output N/A Definable Buzzer Control Reader & Controller control (Default) or Controller control only LED/Back lit Control Define different LED color response base on Green LED Technical Specifications Typical Read range >5 cm (Base on different technology) Reader Standard Output Wiegand (RS232 & RS485 optional) Standard Keypad output N/A Wiegand with 4 bits burst Wiring Distance 150m (22 AWG with shielded cable) Wiring Distance 13.56MHz； ISO14443A-4 Operating Voltage 10 - 15VDC Operating Current 150mA (max) Operating Temperature -30℃-70℃ Exterior dimension 150*53*25 mm Case material PC+ABS Standard Color Black Operating Humidity 10% - 90% Weight 180g

Navigation menu