Smarfid Security Equipment SSLE35 Slender Series Legic Redder User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2524114
Application ID	XaKQL0Toz4+N9nFBhIYV5A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	77.04kB (963025 bits)
Date Submitted	2015-02-05 00:00:00
Date Available	2015-02-05 00:00:00
Creation Date	2015-01-30 13:30:22
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-01-30 13:30:22
Document Title	Microsoft Word - FCC Mifare Slender Series 20130625 En.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclks38

Mifare & ISO14443A-4 UID Slender Series Reader
Design & Technologies
Read both CSN and Sector of Mifare card and
Economical mullion mounts type.
FULL UID of Mifare Plus and DesFire card.
Support on-site Reader Configuration Card to
Design with customer logo is possible.
change certain parameters.
Door Bell function for Number pad reader.
Tamper protection
Number pad use “touching sensor”, the latest
technology and individual number backlit when
touch.
A PIN can be set inside the card to
authenticate with the reader so that “Card +
Easily see under dark environment.
PIN” mode can be implemented without
Could be use as a door location
Friendly Installation
“Touch” number pad does not
Universal back plate allows
carry any moving parts, which
the reader be installed on
implies more durable.
different size of gang box.
All weather proof design with
Non-drop bottom screw made
Stainless steel Security
IP65 certificate.
servicing handier.
screw is an option
All inputs are 12Vdc
protected.
All input and output signals are
protected against static
charges.
Reverse power protection.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Model Number: X1 X2 N1 N2 N3 – N4 X3
RF Technologies
X1X2
MW = Mifare + Mifare UID + DesFire UID
Reader Appearance and Function
N1
3 = Normal Reader
N2
5 = Normal Reader
N3
2 = Read UID / Card Number
3 = Reader Sector (HF Only)
N4
8 = Pigtail
X3
N = No Number pad; K = Number pad
Model
Functions
Standard Reader
Keypad Reader
Configurable Functions
Re-configure Window
5 seconds (Default) or Half an hour after Power up
Reader Output Format
CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID
Wiegand Plus Width
Keypad Output
Buzzer Control
LED/Back lit Control
Different choices to fit with different Controller’s requirements
N/A
Definable
Reader & Controller control (Default) or Controller control only
Define different LED color response base on Green LED
Technical Specifications
Typical Read range
>5 cm (Base on different technology)
Reader Standard Output
Wiegand (RS232 & RS485 optional)
Standard Keypad output
N/A
Wiegand with 4 bits burst
Wiring Distance
150m (22 AWG with shielded cable)
Wiring Distance
13.56MHz； ISO14443A-4
Operating Specification::
Operating Voltage
10 - 15VDC
Operating Current
150mA (max)
Operating Temperature
Exterior dimension
Case material
Standard Color
Operating Humidity
Weight
-30℃-70℃
150*53*25 mm
PC+ABS
Black
10% - 90%
180g

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : baclks38
Create Date                     : 2015:01:30 13:30:22+08:00
Modify Date                     : 2015:01:30 13:30:22+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : baclks38
Title                           : Microsoft Word - FCC Mifare Slender Series 20130625 En.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:a7542d53-d80f-485a-b3b7-bcbbf88a7d02
Instance ID                     : uuid:5a7ac7ce-ddb4-471f-9830-bae1560f8471
Page Count                      : 3

EXIF Metadata provided by EXIF.tools