Smart Approach MAB03NFCAM NFC Antenna Module User Manual MAB03 UserMan

Smart Approach Co., Ltd. NFC Antenna Module MAB03 UserMan

(MAB03) UserMan

BCM EvB Application Guide Smart Approach
Smart Approach BCM EvB Application Guide - 2 - Revision 1.0, September 2013 Corporate Headquarters 4F,No.669,Sec.4.ChungHsing Rd., Chutung,Hsinchu 310, Taiwan,R.O.C. www.smart-approach.com.tw Copyright©2007-2013, by Smart Approach Co., Ltd. Smart Approach Co., Ltd (“S.A.”) retains the right to make changes to its products or specifications to improve performance, reliability or manufacturability. All information in this document, including descriptions of features, functions, performance, technical specifications and availability, is subject to change without notice at any time. While the information furnished herein is held to be accurate and reliable, no responsibility will be assumed by Smart Approach for its use. Furthermore, the information contained herein does not convey to the purchaser of microelectronic devices any license under license under the patent right of any manufacturer. Smart Approach Co., Ltd is a registered trademark. All other products or service names used in this publication are for identification purposes only, and may be trademarks or registered trademarks of their respective companies. All other trademarks or registered trademarks mentioned herein are the property of their respective holders.
Smart Approach BCM EvB Application Guide - 3 - Revision 1.0, September 2013 Contents REVISION HISTORY ................................................................................................................... - 4 - CHAPTER 1 INTRODUCTION ........................................................................................................... - 5 - 1.1. ELECTRIC SAFETY .............................................................................................................. - 5 - 1.2. OPERATE SAFETY ............................................................................................................... - 5 - 1.3. ABOUT THIS GUIDE ............................................................................................................. - 5 - 1.4 NFC ANTENNA MODULE APPLICATIONS ........................................................................................ - 6 - CHAPTER 2 INTRODUCES OF ANTENNA MODULE ........................................................................... - 7 - CHAPTER 3: ANTENNA MODULE ENGAGED AND INSTALLATION ..................................................... - 8 - 3.1 STARTUP PROCEDURES ................................................................................................................ - 9 - FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT ..................................... - 12 - Figure Contents Figure 1 Application of Antenna Module ........................................... - 6 - Figure 2 Antenna Module Front View ................................................ - 7 - Figure 3 Antenna Module Rear View ................................................. - 7 - Figure 4 Application Component ........................................................ - 8 -
Smart Approach BCM EvB Application Guide - 4 - Revision 1.0, September 2013 Revision History This section describes the changes that were implemented in this document. The changes are listed by revision, starting with the most current publication. Revision 1.0 Revision 1.0 of this guide was published in September 2013. This was the first publication of the document.
Smart Approach BCM EvB Application Guide - 5 - Revision 1.0, September 2013 Chapter 1 Introduction Safety: 1.1. Electric Safety To avoid the suddenly electricity cause equipment damaged, please have all connectors linked before turn on the power. 1.2. Operate Safety Please read this manual carefully before install. Please confirm all wires are putting into the right place and linked well. 1.3. About this Guide This product guide included all the information you need in the EvB test. Examples of application designs and technologies are also provided to illustrate the points made and to demonstrate the flexibility offered in achieving the advanced NFC function performance improvement provided within the guide. Additional bonus recommendations point out other opportunities to incorporate greater performance improvement into the design of the application. Feedback on the use of any of the guide is welcomed and encouraged by Smart Approach.
Smart Approach BCM EvB Application Guide - 6 - Revision 1.0, September 2013 1.4 NFC Antenna module applications NFC Antenna Module can be installed under the Touch Pad of notebook, ultrabook , AIO, and personal computers, it can achieve Wireless payment and to read NFC single in different NFC devices. NFC can make the process of identify much easier, more accuracy, much safer, and more limpid. You can link all your electricity devices via NFC to make the information transiting much easier. Figure 1 Application of Antenna Module Under touch pad for ultrabook / notebook /AIO
Smart Approach BCM EvB Application Guide - 7 - Revision 1.0, September 2013 Chapter 2 Introduces of Antenna Module  Module  Antenna  Connector  Shielding。 Combine above 4 elements, we named it “Antenna Module”, it is light, short, small and thin to integrate into NB, tablets and smartphones. as pic below Figure 2 Antenna Module Front View Figure 3 Antenna Module Rear View Antenna   Module 
Smart Approach BCM EvB Application Guide - 8 - Revision 1.0, September 2013 Chapter 3: Antenna Module engaged and Installation Electricity requirement of NFC Antenna Module. Step/Item ITEM NAME Q’TY  Host(Simulates the computer MB) 1  Power Adapter(Supply electric to Host) 1  Wire 1  Antenna Module 1  Wire with Transition board (10 pin to 9 pin connection for Host) 1  Proximity Card (Type1、Type2、Type3、Type4) 1/each Figure 4 Application Components    
Smart Approach BCM EvB Application Guide - 9 - Revision 1.0, September 2013 3.1 Startup procedures Insert the cable to the Antenna Module Connector, shown as below: The other end of the cable is inserted Wire adapter plate and pressed on J2 Connector ranked carefully. Shown as below: The other end of the  wire Transition board to insert the connector with 9 pin at the host. Show as below: Step 1. Step 2 Step 3 J2
Smart Approach BCM EvB Application Guide - 10 - Revision 1.0, September 2013 Insert the DC input connector into  the Host DC 5V input terminal. Show as below. CONNECTOR WITH 9 PIN Step 4 DC 5V
Smart Approach BCM EvB Application Guide - 11 - Revision 1.0, September 2013 Antenna Module induced the cards after Host power on. Step 5 Takeclose toAntenna Module
Smart Approach BCM EvB Application Guide - 12 - Revision 1.0, September 2013 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: 2AAYI-MAB03NFCAM ” and "Contains IC: 11378A-MAB03NFCAM“ Information for the OEMs and Integrators The following statement must be included with all versions of this document
Smart Approach BCM EvB Application Guide - 13 - Revision 1.0, September 2013 supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement.

Navigation menu