Smart Approach MQN18-NFC NFC Antenna Module User Manual
Smart Approach Co., Ltd. NFC Antenna Module
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2600570 |
| Application ID | Uyjv+4UB+qFyBaN1k1bNmQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 120.28kB (1503501 bits) |
| Date Submitted | 2015-04-30 00:00:00 |
| Date Available | 2015-05-06 00:00:00 |
| Creation Date | 2015-04-29 14:52:11 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2015-04-29 14:52:11 |
| Document Title | User manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | USER |
MQN18 NFC Antenna Module Datasheet Version 1.2 Smart Approach Co., Ltd. 4F,No.669,Sec.4.Chung Hsing Rd., Chutung, Hsinchu 310, Taiwan, R.O.C. +886-3-5830303 www.smart-approach.com.tw MQN18 Datasheet Smart Approach Co., Ltd (“S.A.”) retains the right to make changes to its products or specifications to improve performance, reliability or manufacturability. All information in this document, including descriptions of features, functions, performance, technical specifications and availability, is subject to change without notice at any time. While the information furnished herein is held to be accurate and reliable, no responsibility will be assumed by Smart Approach for its use. Furthermore, the information contained herein does not convey to the purchaser of microelectronic devices any license under license under the patent right of any manufacturer. Smart Approach Co., Ltd is a registered trademark. All other products or service names used in this publication are for identification purposes only, and may be trademarks or registered trademarks of their respective companies. All other trademarks or registered trademarks mentioned herein are the property of their respective holders. Feedback on the use of any of the document is welcomed and encouraged by Smart Approach. Please contact service@smart-approach.com.tw for your feedback or any ordering inquiry. Please contact support@smart-approach.com.tw for any technical question. -2- Revision 1.3 April 2015 MQN18 Datasheet FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information for the OEMs and Integrators The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OE M integrators for end users must include the following information in a prominent location. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. If the end product integrating this module is going to be operated in 13.56MHz frequency range, the warni ng statement in the user manual of the end product should include the restriction of operating this device in indoor could void the user’s authority to operate the equipment. -3- Revision 1.3 April 2015 MQN18 Datasheet End Product Labeling Label for the final end product must include: Contains FCC ID: 2AAYI-MQN18-NFC A RF transmitter inside, FCC ID: 2AAYI-MQN18-NFC Revision History This section describes the changes that were implemented in this document. The changes are listed by revision, starting with the most current publication. Revision 1.0 Revision 1.0 of this datasheet was published in December 2014. This was the first publication of the document. Revision 1.1: Modified page header. Revision 1.2: Added power consumption description. Revision 1.3: Updated NFC module outline. -4- Revision 1.3 April 2015 MQN18 Datasheet Contents REVISION HISTORY ............................................................................................................................. - 4 CONTENTS ........................................................................................................................................... - 5 FIGURE CONTENTS ............................................................................................................................ - 6 TABLE CONTENTS .............................................................................................................................. - 6 1 INTRODUCTION .......................................................................................................................... - 7 - PRODUCT OVERVIEW ................................................................................................................ - 8 2.1 FEATURES .............................................................................................................................. - 8 - 2.2 APPLICATION .......................................................................................................................... - 8 - FUNCTIONAL DESCRIPTIONS .................................................................................................. - 9 - ELECTRICAL SPECIFICATIONS .............................................................................................. - 10 4.1 PIN DESCRIPTION ................................................................................................................. - 10 - 4.2 I C ADDRESS ........................................................................................................................- 11 - 4.3 TEMPERATURE MAXIMUM RATINGS .........................................................................................- 11 - 4.4 DC ELECTRICAL PARAMETERS .............................................................................................. - 12 - 4.5 ANTENNA SPECIFICATIONS .................................................................................................... - 12 - 4.6 POWER CONSUMPTION ......................................................................................................... - 13 - 4.7 THERMAL PROTECTION ......................................................................................................... - 13 - 4.8 SYSTEM POWER MODES ........................................................................................................ - 13 - 4.9 RESET AND DOWNLOAD CONCEPT .......................................................................................... - 14 - 4.10 NFC CONNECTION RECOMMENDATION .................................................................................. - 15 - 4.11 MAIN BOARD DESIGN REFERENCE ........................................................................................ - 15 - ORDERING INFORMATION ...................................................................................................... - 16 - RELIABILITY VERIFICATION.................................................................................................... - 17 - NFC MODULE OUTLINE ........................................................................................................... - 18 - -5- Revision 1.3 April 2015 MQN18 Datasheet Figure Contents Figure 1 Typical Application ................................................................................................. - 8 Figure 2 Module Block Diagram .......................................................................................... - 9 Figure 3 Reset via VEN pin ................................................................................................. - 14 Figure 4 Connection Recommendation ............................................................................. - 15 Figure 5 Main Board Design W/O UICC Reference ........................................................... - 15 Figure 6 Module FPC Connection Foot Print ..................................................................... - 18 Figure 7 FPC Wire Dimension ........................................................................................... - 18 Figure 8 MQN18 NFC Module Drawing ............................................................................. - 19 - Table Contents Table 1 Module Pin Description ......................................................................................... - 10 Table 2 I2C Address ........................................................................................................... - 11 Table 3 Temperature Maximum Ratings ............................................................................ - 11 Table 4 DC Electrical Specification .................................................................................... - 12 Table 5 Antenna Specifications .......................................................................................... - 12 Table 6 Current Consumption ............................................................................................ - 13 Table 7 Thermal Protection ................................................................................................ - 13 Table 8 System Power Modes Description ........................................................................ - 13 Table 9 Power Mode Configuration.................................................................................... - 14 Table 10 Reset Timing ....................................................................................................... - 14 Table 11 Ordering Information Table .................................................................................. - 16 Table 12 Reliability Item Table ........................................................................................... - 17 - -6- Revision 1.3 April 2015 MQN18 Datasheet 1 Introduction This document consists of descriptions and specifications for both functional and physical aspects of the MQN18 NFC reader / writer module. In addition to the datasheet, Smart Approach maintains and extensive device-specific library of support and collateral materials that you may find useful in your application. Depending upon the Smart Approach device, this library may include: Presentations highlighting the operational features and specifications of the device to assist in developing your own product road map. Application notes that provide detailed descriptions of the use of the particular Smart Approach product to solve real-world problems. -7- Revision 1.3 April 2015 MQN18 Datasheet 2 Product Overview MQN18 is full featured NFC controllers designed for integration in portable equipment. It is optimized for low power consumption with fully host controllable power states and for small footprint for portable equipment applications. The module’s compact, flexible design with and exposed pad is optimal for size-sensitive applications, assures robust performance. The following illustration shows a high-level, generic view of a MQN18 application. Figure 1 Typical Application 2.1 Features This section Tables key aspects of the MQN18 module functionality and design that distinguish it from similar products: NXP NPC100 NFC Controller Compliant with ISO/IEC 14443 A/B Compliant with ISO/IEC 15693/18092 Antenna pairing could be customized I2C interface 2.2 Application Suggested applications for the MQN18 module include: NFC writer NFC reader NFC peer to peer controller NFC payment NFC identification -8- Revision 1.3 April 2015 MQN18 Datasheet 3 Functional Descriptions This section provides detailed information about how MQN18 module works, what configurations and operational features are available. The following illustration shows the primary functional blocks of MQN18 module. Figure 2 Module Block Diagram Loop Antenna is Smart Approach customize solution. Antenna matching is also a customize solution. NFC controller includes NXP NPC100 chipset, and has an I2C control interface through the connector to mother board. -9- Revision 1.3 April 2015 MQN18 Datasheet 4 Electrical Specifications This section provides the DC characteristics, AC characteristics, recommended operating conditions. It includes information on the various timing functions of the module. 4.1 Pin Description The following Table shows the pin description for MQN18 module. The connection ground is internally connected and should be connected to GND on the main board as well. Table 1 Module Pin Description PIN No. Name VBAT MOD_GND SWP SWP data line to UICC/SIM, Input / Output RFU Unused pin could be floating IRQ Interrupt to host, High: Interrupt; Low: Normal PMUVCC I C_SDA I C_SCL MOD_GND 10 VEN 11 DWL_REQ 12 SIMVCC 13 VBAT 14 VDD_IO 15 MOD_GND - 10 - Power Reference P/I/O +3.3V power supply input 3.3V Module Ground GND PMUVCC I/O VDD_IO 1.8V VDD_IO I/O VDD_IO GND VBAT Firmware download control: Active High VDD_IO The power rail used to power UICC / SIM, input PMUVCC P(O) 3.3V 1.8V/3.3V GND Description Power supply to UICC/SIM, input, + 1.8V I C Data Line I C Clock Module Ground Wake up the module from standby mode or reset the module +3.3V Power Supply +1.8V or +3.3V for host IO reference voltage Module Ground Revision 1.3 April 2015 MQN18 Datasheet 4.2 I2C Address MQN18 I2C 7bit address is defined to 0x28. To write data, MQN18 is addressed using 0x50, to read data, MQN18 is addressed using 0x51. Table 2 I2C Address I2C address (R/W=0, write) I2C address (R/W=1, read) 0x50 0x51 4.3 Temperature Maximum Ratings Thermal specifications for this module have been modeled using a two-layer test board. Table 3 Temperature Maximum Ratings Value Symbol TS - 11 - Definition Operating Temperature Storage Temperature Revision 1.3 April 2015 Units Min Max -20 80 ℃ -40 100 ℃ MQN18 Datasheet 4.4 DC Electrical Parameters DC Electrical specifications for this module have been modeled using a two-layer test board. Table 4 DC Electrical Specification Value Symbol Power VBAT Supply DC Current IVBAT Power PBAT Units Definition Consumption Min Typ Max 3.1 3.3 3.5 Volts 170 mA 0.595 4.5 Antenna Specifications Customized Antenna specifications for this module have been modeled using a two-layer test board. Table 5 Antenna Specifications Item DC Resistance AC Impedance Frequency Q factor Antenna Type Module Material Antenna Size - 12 - Value Min Typ Max 0.5 Unit Ω Ω 50 13.06 13.56 14.06 25 30 35 MHz FR4 Revision 1.3 April 2015 VSWR <2 Add the Ferrite sheet FPC Loop Coil (40 ±0.3) X (60±0.3) Note mm MQN18 Datasheet 4.6 Power Consumption Table 6 Current Consumption Symbol Parameter Conditions Min Typ Max Unit IHPD Hard power down current 10.5 12 μA ISTBY Standby state current VBAT=3.6V 20 μA IACT Active state current VBAT=3.6V mA ITVDD Transmitter supply current VBAT=3.1V 30 100 mA IPMUVCC PMUVCC supply Class B 1.5 μA Class C μA Unit VBAT=3.6V, VEN=0V 4.7 Thermal Protection Table 7 Thermal Protection Symbol TOVERTEMP Parameter Conditions Temperature protection trigger Min Typ Max 120 125 130 4.8 System power modes Table 8 System Power Modes Description Mode Full power mode Low-power mode Powered by the Field Power Off mode - 13 - Description The battery supply (VBAT) as well as the pad supply (VDD_IO) is available, all use cases can be executed The pad supply (VDD_IO) is not available. Only the Card Emulation mode use cases via SWP are allowed The battery supply (VBAT) and pad supply (VDD_IO) are not available. The system is powered via PbF interface. Only Card Emulation use cases via SWP are allowed. The system is not supplied from any source or the system is kept Hard Power Down (HPD) Revision 1.3 April 2015 MQN18 Datasheet Table 9 Power Mode Configuration VBAT VDD_IO VEN Power mode Off Off Power Off mode On Off Power Off mode On Off On Low Power Mode On On On Full power mode Note: X: Don’t care 4.9 Reset and download concept To enter reset there are 2 ways: Pulling VEN low (Hard Power Down state) If VBAT monitor is enabled: lowering VBAT below the monitor threshold (monitor mode, if VEN is kept above 1.1 V)This reset mode can be left if PbF is enabled when the field is high enough (RF field detected) to enter PbF mode. To get out of reset, there are 2 ways: Pulling VEN high with VBAT above VBAT monitor threshold if enabled Entering a field strong enough to power the IC Figure 3 Reset via VEN pin Table 10 Reset Timing Symbol tRESETVEN tBOOT - 14 - Parameter VEN pulse width to reset Boot time Revision 1.3 April 2015 Condition Min Typ Max Unit μs 10 ms MQN18 Datasheet 4.10 NFC Connection Recommendation Figure 4 Connection Recommendation 4.11 Main Board Design Reference Figure 5 Main Board Design W/O UICC Reference - 15 - Revision 1.3 April 2015 MQN18 Datasheet 5 Ordering Information Table 11 Ordering Information Table Order Number MQN18 Dimension - 16 - Descriptions NFC Controller Module (NXP NPC100) with Integrated Antenna Module: 12x26mm; Antenna Area Size: 60x40 mm Revision 1.3 April 2015 MQN18 Datasheet 6 Reliability Verification Table 12 Reliability Item Table No. Item Low Temperature Storage Test Condition Benchmark Result Qty -40oC IEC60068-2-1 Pass IEC60068-2-78 Pass -20oC IEC60068-2-1 Pass 80oC IEC60068-2-2 Pass IEC60068-2-78 Pass ASTM B368 Pass Compliance Pass Compliance Pass High Temperature 80oC, Humidity: Storage Test 95% Low Temperature Operation Test High Temperature Operation Test High Temperature 65oC, Humidity: Operation Test 95% Salt Test RoHS PH: 3.0 ~ 3.2 ,50℃, 72 hrs, Density: 5%±1% Normal HF Normal - 17 - Revision 1.3 April 2015 MQN18 Datasheet 7 NFC Module Outline The following illustration shows the package drawing for MQN18 module. The drawing contains the detail views, dimensions, tolerances, and notes. Pin 1 Figure 6 Module FPC Connection Foot Print Figure 7 FPC Wire Dimension - 18 - Revision 1.3 April 2015 MQN18 Datasheet Pin 1 Figure 8 MQN18 NFC Module Drawing - 19 - Revision 1.3 April 2015
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 19 Language : zh-TW Tagged PDF : Yes Author : USER Creator : Microsoft® Word 2010 Create Date : 2015:04:29 14:52:11+08:00 Modify Date : 2015:04:29 14:52:11+08:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools