Smart Device Technology IOT-3399E IoT-3399E User Manual IoT 3288A V1 0
Shenzhen Smart Device Technology Co., LTD IoT-3399E IoT 3288A V1 0
15_IoT-3399E UserMan r1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4113668 |
| Application ID | FLCqNXzswvUVuu/zh7Y3zw== |
| Document Description | 15_IoT-3399E UserMan r1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 215.65kB (2695581 bits) |
| Date Submitted | 2018-12-21 00:00:00 |
| Date Available | 2018-12-21 00:00:00 |
| Creation Date | 2018-12-18 20:17:58 |
| Producing Software | Microsoft® Office Word 2007 |
| Document Lastmod | 2018-12-18 20:17:58 |
| Document Title | IoT-3288A V1.0 |
| Document Creator | Microsoft® Office Word 2007 |
| Document Author: | SMiT |
Shenzhen Smart Device Technology Co.,Ltd IoT-3399E USER MANUAL Modification History Version Description Date V1.0 V1.1 V2.0 Creation Modify Modify 2017-07-12 2017-09-20 2018-06-27 Shenzhen Smart Device Technology Co.,Ltd Catalogue Chapter 1. Production General Description ..................................................................... 3 1.1 Scope of Application ....................................................................................... 3 1.2 General Description ........................................................................................ 3 1.3 Features ......................................................................................................... 3 1.4 Appearance and Interface Sketch................................................................... 4 Chapter 2. Basic Function List .......................................................................................... 5 Chapter 3.PCB Measurement And Interface Layout ........................................................ 6 3.1 PCB Measurement Chart ................................................................................ 6 3.2 Interface Parameter Definition ........................................................................ 8 Chapter 4. Electric Performance ......................................................................................21 Chapter 5 Assembly Using Notice ...................................................................................23 Shenzhen Smart Device Technology Co.,Ltd Chapter 1. Production General Description 1.1 Scope of Application IoT3399E belongs to android smart mainboard, generally applicable to smart display terminal products, video terminal products, industrial automation terminal products, such as: advertising machine, digital signage, smart self-service termina, smart retail terminal, O2O smart device , Industrial control PC, robot device etc 1.2 General Description IoT-3399E uses Rockchip RK3399 Big.Little architecture: Dual Cortex-A72 + Quad Cortex-A53, 64-bit CPU,carries Android 7.1 system, main frequency 2.0GHz, outstanding properties.Using Mali-T864GPU, support 4K, H.265 hard decoding. Multi-channel video output and input for better performance, faster speed and richer interfaces ,it is the best choice for your man-machine interactive,industrial projects. 1.3 Features RK3399 super CPU with Android 7.1 system, faster speed, better performance. Support 5G and 2.4GWIFI, independent dual antenna Support 1000M ethernet port Rich extension interface: 8 USB interfaces( 6 insert pin, 2 standard USB interface), 4 extensible serial port(3* RS232,1*TTL), 1*485 interfaces ,4*GPIO and ADC interface, it can meet the requirements of various peripherals in the market. High definition. Maximum support 3840x2160 4K decoding and all kinds of LCD screen with LVDS/eDP/HDMI etc interface,support each size and different resolution cropping screen, Support dual screen display. Support Android system customized, provide system invocation interface API reference source code, support clients upper application development perfectly. Perfect support IR, optics,capacitive, resistance, touch foil etc multiple mainstream touch screen,support non driver touch screen HID configuration without debugging. Shenzhen Smart Device Technology Co.,Ltd 1.4 Appearance and Interface Sketch Shenzhen Smart Device Technology Co.,Ltd Chapter 2. Basic Function List Main Hardware Index GPU Internal Memory Built-in Storage Built-in ROM Rockchip RK3399 64-bit CPU, main frequency 2.0GHz 1.Big.Little architecture: Dual Cortex-A72 + Quad Cortex-A53 2.Built-in low power consumption MCU Cortex-M0 Quad Cortex- Mali-T860MP4 Standard configuration 2G(4G optional) Standard configuration 8G(16/32/64G optional) 2KB EEPROM LVDS output 1 single/double channel，can drive 50/60Hz LCD panel directly eDP output Can drive many kinds of resolution LCD panel with eDP interface HDMI output 1,support 1080P@120Hz，4kx2k@60Hz output HDMI input Support HDMI IN（can select TF card slot） Audio and Video ouput Earphone Support left and right channels output, built-in dual 4R/20W,8R/10W amplifier Support one channel earphone interface USB interface 2*USB 3.0, 6*USB Socket Serial port 5 channels serial port (3*232,1*TTL,1*485) Mipi Camera 30pin FPC interface，Support 1300w Camera WIFI、BT Built-in WIFI, BT4.0（optional） Ethernet 1000M self-adapting Ethernet Video Playing Support wmv、avi、flv、rm、rmvb、mpeg 、ts、mp4, etc Image Format Support BMP, JPEG, PNG, GIF Operating System RTC Real Time Clock Timing Switch System Upgrade Android 7.1 CPU Support Support Support local SD,USB upgrade Shenzhen Smart Device Technology Co.,Ltd Chapter 3.PCB Measurement And Interface Layout 3.1 PCB Measurement Chart Shenzhen Smart Device Technology Co.,Ltd PCB：8 layers Measurement：146mm*100mm, thickness1.6mm Screw hole specification：∮3.2mm x 4 Shenzhen Smart Device Technology Co.,Ltd 3.2 Interface Parameter Definition ◆Power Input Port Use 12V DC power supply，only allowed from the DC power supply and power socket to power the board system ， the plug of the power adapter DC IN specifications is D6.0,d2.0. （outerΦ4.4mm,PINΦ1.65mm),without in a peripheral empty load cases,12V dc power supply to support the minimum current 600 mA. Power socket interfaces are defined as follows，can use power panel power supply，the socket specifications is 6 pin 2.54 mm spacing. NO. Definition Property Description VCC input 12V input VCC input 12V input GND ground ground electrode electrode GND ground ground electrode electrode VCC-5V input standby 5V input STB output standby signal output Standby 5V input & standby signal output is used as standby power supply board，if want to do low standby power consumption，the standby 5V input & standby signal output signal respectively connected with the 5 v power supply board STB and PS_ON（the description of the two signals might be different from different suppliers of power supply board，Please refer to the actual） ，If you don't need to do low standby power consumption,then no need to connect the 2 pins. Shenzhen Smart Device Technology Co.,Ltd ◆ BAT1 RTC Battery Port used to install the clock battery，supply power to the system clock when power outages. NO. Definition Property Description RTC input 3V input GND ground ground electrode electrode ◆ MIC Port Please note that the MIC is positive negative connection，not reverse. NO. Definition Property Description MIC- input MIC- MIC+ input MIC+ ◆ Port Of Receiving Remote Control NO. Definition Property Description IR input remote control signal input GND ground ground electrode electrode 3V3 Power 3.3V output Shenzhen Smart Device Technology Co.,Ltd ◆ Work Indicating Lamps The default support gongyang red blue double LED lights. NO. Definition Property Description LED_B Blue light Work light VCC Power supply 3.3V output LED_R Red light Standby lamp ◆ LED/IR Port The position of remote control receiving and indicating light is shared（can choose welding 2.54 mm spacing of 7 pins socket）. NO. Definition Property Description LED_B output work indicating lamp VCC power 3.3V output LED_R output standby indicating lamp ADC ADC input ADC button input IR input remote control signal input GND ground ground electrode electrode 3.3V power 3.3V output Shenzhen Smart Device Technology Co.,Ltd ◆ Backlight Control Port Use for LVDS screen backlight control，the 12V power supply current is not more than 1.5A，When using more than 19 inch screen or screen backlight power in more than 20W，backlight power supply electricity is taken from the other power plate，so as not to cause system instability. Backlight can make voltage is 5V，if other voltage, please add IO level conversion circuit. The 12V power supply only as a backlight power output, don't as a power input supply system. NO. Definition Property Description GND ground electrode ground electrode GND ground electrode ground electrode BL-ADJ output backlight brightness adjust control BL-EN output backlight enable control VCC power 12V output VCC power 12V output ◆ IO Interface I/O used for provide peripherals with input/output for controlling signal. Electrical level is 3.3V. NO. Definition Property Description VCC power 3.3V output I/O input/output GPIO-1 I/O input/output GPIO-2 I/O input/output GPIO-3 I/O input/output GPIO-4 GND ground electrode ground electrode Shenzhen Smart Device Technology Co.,Ltd ◆ LVDS Port Commonly used LVDS interface definitions，support single/ double channels，6/8/10 bits 1080P LVDS screen. Screen voltage can be choosed by jumper cap，can choose to support 3.3V/5V/12V screen power supply. In order to avoid burning board and screen, please pay attention to the following： 1.Please make sure the specifications and power supply voltage of the screen is correct, the power supply of the board can meet the maximum current screen work accordingly 2.Please confirm the power of the jumper cap is correct by multimeter. Shenzhen Smart Device Technology Co.,Ltd The selection of screen power supply with jumper cap in above photo, from top to bottom :3.3V/5V/12V. NO. Definition Property Description PVCC Power output LCD power output，+3.3v/+5V/ +12V Optional GND ground electrode ground electrode D0N Output Pixel0 Negative Data (Odd) D0P Output Pixel0 Positive Data (Odd) D1N Output Pixel1 Negative Data (Odd) 10 D1P Output Pixel1 Positive Data (Odd) 11 D2N Output Pixel2 Negative Data (Odd) 12 D2P Output Pixel2 Positive Data (Odd) 13 GND ground electrode ground electrode 14 GND ground electrode ground electrode 15 CLK0N Output Negative Sampling Clock (Odd) 16 CLK0P Output Positive Sampling Clock (Odd) 17 D3N Output Pixel3 Negative Data (Odd) 18 D3P Output Pixel3 Positive Data (Odd) 19 D5N Output Pixel0 Negative Data (Even) 20 D5P Output Pixel0 Positive Data (Even) 21 D6N Output Pixel1 Negative Data (Even) 22 D6P Output Pixel1 Positive Data (Even) 23 D7N Output Pixel2 Negative Data (Even) 24 D7P Output Pixel2 Positive Data (Even) 25 GND ground electrode ground electrode 26 GND ground electrode ground electrode 27 CLK1N Output Negative Sampling Clock (Even) 28 CLK1P Output Positive Sampling Clock (Even) 29 D8N Output Pixel3 Negative Data (Even) 30 D8P Output Pixel3 Positive Data (Even) Shenzhen Smart Device Technology Co.,Ltd ◆ 232 Serial port interface*2 Led out of the two sets of ordinary 232 serial port, can support the general market of the 232 serial devices. Remark： 1.Serial voltage matching, Cannot access directly TTL,485 serial device. 2.TX，RX whether the connection is correct. NO. Definition Property Description GND ground electrode ground electrode 232-RXn input 232-RX 232-TXn output 232-TX VCC Power supply 5V output ◆ TTL Wires Serial Socket Port*1 The board raises a common one wires of serial ports,can support general serial port devices on the market，level of the serial port is 0V to 3.3V.If the abutting serial level higher than 3.3 V，must have the isolating circuit or level conversion circuit, otherwise it will burn out master and equipment. Notice： 1.If TTL serial port voltage can match or not, can't directly access MAX232,485 devices. 2.TX，RX connection if is correct. Shenzhen Smart Device Technology Co.,Ltd NO. Definition Property Description GND ground ground electrode electrode ◆ UART-RX input/output RX UART-TX input/output TX VCC Power supply 3.3V output 485 Support 1 set of 485 communication interfaces, It can support the common 485 interface devices on the market, interface level is 3.3V, When the interface level is higher than 3.3v, there should be an isolated circuit or a level conversion circuit, otherwise the main control and equipment will be burnt out. 1.485 interface voltage is matched. 2.485A, 485B line sequence connection method is correct. NO. Definition Property Description GND ground ground electrode electrode 485B input/output RX 485A input/output TX VCC Power supply 3.3V output Shenzhen Smart Device Technology Co.,Ltd ◆ USB The board has 2 standard USB 3.0interface，including 6inbuilt USB socket，can be used for peripheral expansion，default to HOST，each interface power supply current is not more than 500mA，for USB OTG interface，can select the Host/Device by System settings. Shenzhen Smart Device Technology Co.,Ltd USB There are two kinds of sockets ：One kind is single row pin ，Electrical definitions are as follows： NO. Definition Property Description VCC Power supply 5V output DM input/output DM DP input/output DP GND ground ground electrode electrode The other is a double row pin, electrical definitions such as J23 are as follows： NO. Definition Property Description VCC Power supply 5V output DM input/output DM DP input/output DP GND ground ground electrode electrode VCC Power supply 5V output DM input/output DM DP input/output DP GND ground ground electrode electrode ◆ Touch screen interface Shenzhen Smart Device Technology Co.,Ltd NO. Definition Property Description VCC Power supply 3.3V output SCK input/output I2C clock SDA input/output I2C data INT input/output interrupt RST input/output reset GND ground ground electrode electrode ◆ HDMI_IN Interface HDMI_IN and TF card Alternative interface ◆ Camera_IN Interface Shenzhen Smart Device Technology Co.,Ltd Board support 1400W pixel Mipi camera，Installed in jp26 socket ，the electrical definition of the socket is as follows： NO. Definition Property Description NC VDD Power supply 2.8V output DVDD Power supply 1.2V output DOVDD Power supply 1.8V output NC GND ground electrode ground electrode VDD Power supply 2.8V output GND ground electrode ground electrode I2C3_SDA input/output SDA signal 10 I2C3_SCL output SCL signal 11 RST output reset signal 12 PWDN output Power down control 13 GND ground electrode ground electrode 14 MCLK output Master clock 15 GND ground electrode ground electrode 16 D3P input/output mipi data channel3 plus 17 D3N input/output mip data channel3 minus 18 GND ground electrode ground electrode 19 D2P input/output mipi data channel2 plus 20 D2N input/output mipi data channel2 minus 21 GND ground electrode ground electrode 22 D1P input/output Mipi data channel 1 plus 23 D1N input/output Mipi data channel 1 minus 24 GND ground electrode ground electrode 25 CLKP input/output Mipi Clock channel plus 26 CLKN input/output Mipi Clock channel minus 27 GND ground electrode ground electrode 28 D0P input/output Mipi data channel 0 plus 29 D0N input/output Mipi data channel 0 minus 30 GND ground electrode ground electrode Shenzhen Smart Device Technology Co.,Ltd ◆ Speaker interface NO. Definition Property Description OUTP-L output Audio output left + OUTN-L output Audio output left - OUTN-R output Audio output right - OUTP-R output Audio output right + ◆ Other standard interfaces and functions : SD card Memory Port USB Data storage, maximum support 32G Host port, support data storage, data input, USB, mouse keyboard, camera, touch screen etc Ethernet Port RJ45 port Support 1000M wire network HDMI Port Standard port support HDMI data output, maximum support 1080P Earphone Port Standard port 3.5mm standard port Shenzhen Smart Device Technology Co.,Ltd Chapter 4. Electric Performance Project Min Typical Max 12V -- -- 50mV 200mA 350mA 17mA 20mA -- 500mA 3.3V working current 400 mA 500 mA 5V working current 550 mA 1A 12V working current 580 mA 1A -- 500mA 400 mA 500 mA -- -- -- -- -- 500mA voltage Power voltage ripple wave current working current --3A -- Power current (HDMI output,no other peripheral) standby current USB power supply --- current Power current (LVDS) USB power supply -- current 3.3V working current 5V working current Total output(eDP) 12V working current USB supply current Total output current Relative humidity Environment ---3.3V -- working temperature 0℃ Storage temperature -20℃ 800mA -- 80% -- 60℃ 70℃ Remark 1：When connect the LVD screens，need to pay attention to select the right Shenzhen Smart Device Technology Co.,Ltd backlight working voltage 3.3V, 5V, 12V，the users cannot be applied to beyond the corresponding maximum current peripherals. Remark 2: When connect the eDP/LVD screens，the board of the whole working current and standby current depending on the connection screens，above form not listed. Shenzhen Smart Device Technology Co.,Ltd Chapter 5 Assembly Using Notice In the process of assembly use，please note the following points (and not limited to) problem. 一．Bare board and a peripheral short circuit problem. 二．In the process of installing fixed，avoiding the bare board deformation caused by fixed problems. 三．When connect the eDP/LVDS screens，pay attention to the screen voltage, electric current if is coincident. Attention to the problem of screen socket 1 pin direction. 四．When connect the eDP/LVDS screens，pay attention to the screen backlight voltage, electric current if is coincident. The backlight power is more than 20W, whether or not to use other power panel power supply. 五．Peripheral devices (USB, IO, etc) when installation，attention to the problem of peripheral IO level and current output. 六．A serial port when installation，pay attention to whether connect the serial port of the device level matching(232 or 485).TX，RX connection if is correct. 七.Whether the input power supply access on the power input interface，according to the total peripheral evaluation，whether can meet the requirements of the input power supply voltage, electric current and so on. To eradicate facilitate the operation from a backlight socket for access to the power supply input power. Shenzhen Smart Device Technology Co.,Ltd This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. EU Regulatory Conformance Hereby, we (Shenzhen Smart Device Technology Co., LTD) declared that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU Importer: Fender Musical Instruments S.L.U. Address: C/Capitan Haya, 38 Planta 4, 28020 MADRID, Spain. E-mail: support@fender.com Manufacturer: Shenzhen Smart Device Technology Co., LTD Address: 17th, 18th floor, Guoshi Mansion, Shahe West Road 1801, Nanshan, Shenzhen, China
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Warning : Invalid secondary xref table Page Count : 24 Language : zh-CN Tagged PDF : Yes Title : IoT-3288A V1.0 Author : SMiT Creator : Microsoft® Office Word 2007 Create Date : 2018:12:18 20:17:58+08:00 Modify Date : 2018:12:18 20:17:58+08:00 Producer : Microsoft® Office Word 2007EXIF Metadata provided by EXIF.tools