Smart Technologies and Investment STGTORB709U Universal Receiver (Narrow Band; 318MHz Rx) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	807175
Application ID	XdNWrlVnoGKijiWiiyZK1w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.08kB (150984 bits)
Date Submitted	2007-06-25 00:00:00
Date Available	2007-06-25 00:00:00
Creation Date	2007-06-01 15:58:46
Document Lastmod	2007-06-01 16:20:38
Document Title	User Manual

GTO PRO Model RB-709U Relax Outputs Universal Receiver Instruction Manual
1. Connections:
RB~709U
Channel 1 Relay Output
Channel 2 Relay Output
2 Operation:
Learning transmitter(s) with RB-709U receiver:
a Press and hold the transmitter’s button to be learned,
a Press the ”LEARN CHI’ (or ‘LEARN CH2’) button
on the RB-709U receiver for 1—2 seconds or until
the red LED turn on then release the button.
0 Note: When the correct code is received and the LEARN
corresponding relay output is activated, the red CHI
LED will tum on. BUTTON
LEARN
CH2
BUTTON
GTO, the, Part Number: RBTDQ-U
GTO. Inc, narrow band receiver models RB709~U is destgned to be used with all GTO/PRO and Mighty Mute brand gate opener
products together with your GTO and Mighty Mule narrow band transmitters. If you have an older model transmitter, or another
brand, please contact our Customer Service Department at LEGO-5434283.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Made in China
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation, This equipment generates. uses and can radiate radio
lrequency energy and, if not installed and used in accordance with the instructions. may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. it this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more or the
ioIIoWing measures:
- Heorient or relocate the receiving antenna.
r Increase the separation between the equipment and receiver.
~ Connect the eqUipment into an outlet on a circuit different from that to which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help
GTO, Inc. - 3121 Hansiield Road -Ta|iahassee. Fl. 32303
1430064344283 . wwwgtoinc com 
GTO, inc. Part Number: RB7U§~U
GTO, inc. narrow band receiver models HB709-U is designed to be used with all GTO/F’Fio and Mighty Mule brand gate opener
products together with your STD and Mighty Mule narrow band transmitters. It you have an older model tiansmitter. or another
brand, please contact our Customer Sen/ice Department at LEGO-5434233.
Warningz‘ Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
Made in China
user's authority to operate the equipment.
NOTE: This equipment has been tested and iound to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a resrdential installation. This equipment generates. uses and can radiate radio
frequency energy and, it not installed and used in accordance with the instructions, may cause harmiui
interference to radio communications.
However, there is no guarantee that interference Will not occur in a particular lnstallation. If this equipment
does cause harmful Interteronce to radio or television reception, which can be determined by turning the
equipment pit and on, the user is encouraged to try to correct the interference by one or more of the
following measures
~ Fieorient or relocate the receiving antenna
- increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
GTO, inc, ~ 3i21 Hartsfieid Road ~ Tallahassee, FL 32303
i~800r543~4253 ~ wwwgtoirldcom 

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2007:06:01 15:58:46Z
Modify Date                     : 2007:06:01 16:20:38+08:00
Metadata Date                   : 2007:06:01 16:20:38+08:00
Format                          : application/pdf
Document ID                     : uuid:367f2f2b-7b49-431a-8d4b-7aab562542e2
Instance ID                     : uuid:2254e4f0-5c5d-433b-990d-d3685dac6350
Page Count                      : 2

EXIF Metadata provided by EXIF.tools