SmartDisplayer Technology BT1CM3 BLE Thick Card User Manual SD Onepager

SmartDisplayer Technology BLE Thick Card SD Onepager

User Manual

Getting set up WARNING • Avoid placing the Safedome card with other RFIDcards, this may disrupt connection.• To avoid connection issues avoid sitting with theSafedome card in your back pocket.• Location may be inaccurate if near Bluetooth blocking obstacles (e.g. large bodies of water,tall buildings, etc) or indoors.• If you restart the phone or remove the appfromthe phones memory you will need to restart the app for Safedome toprotectyou.SYNCING YOUR CARD TO YOUR SMART PHONEWhat will I need?• A valid email address • Bluetooth connection turned ‘on’• Location services turned ‘on’How do I get set up?Simply follow instructions in the App.SETTING UP ALERT FREE ZONESWhat will I need?• Internet connection • Be in the location where your setting up the zone / ORdisconnected in that locationHow do I set this up?Simply follow instructions in the AppIDENTITY SET UPWhat will I need?A valid email address ACCOUNTS SET UPCan I add my personal accounts?This facet currently utilizes test data from Yodlee at thistime you cannot add personal accounts.CUSTOMER SERVICECan I call the customer service number?This feature is only activated for live paying customers, if you have any questions please contact the sales representative who issued the card.AIRPLANE MODEHow do I temporarily disconnecttheappfrommywallet?Go to settings within wallet, turn on flight mode. (You must be connected to the card and Bluetooth to turnon flight mode).How do I reconnect?Turn off flight mode by simply pressing the button on your Safedome card, thiswill reconnect you.INFORMATION SHEETDO NOT:• Fold, cut, puncture, pierce or damage• Expose to heat • Submerge in water (the Safedome card is water resistant, not waterproof)Hidden battery and micro chipPower button25 MAY 2015 | SD INFORMATION SHEET tt@maxwellforest.com+1 (888) 417 5550 maxwellforest.com
FCC ID: 2ADPT-BT1CM3 FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • ︎Reorient or relocate the receiving antenna. ! • Increase the separation between the equipment and receiver. ! • Connect the equipment into an outlet on a circuit different from that to which the !receiver is connected. ! • Consult the dealer or an experienced radio/TV technician for help. !FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. ! This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ! !

Navigation menu