SmartDisplayer Technology BT1CM3 BLE Thick Card User Manual SD Onepager
SmartDisplayer Technology BLE Thick Card SD Onepager
User Manual
Getting set up
WARNING
• Avoid placing the Safedome card with other
RFIDcards, this may disrupt connection.
• To avoid connection issues avoid sitting with
theSafedome card in your back pocket.
• Location may be inaccurate if near Bluetooth
blocking obstacles (e.g. large bodies of
water,tall buildings, etc) or indoors.
• If you restart the phone or remove the
appfromthe phones memory you will need to
restart the app for Safedome toprotectyou.
SYNCING YOUR CARD TO YOUR SMART PHONE
What will I need?
• A valid email address
• Bluetooth connection turned ‘on’
• Location services turned ‘on’
How do I get set up?
Simply follow instructions in the App.
SETTING UP ALERT FREE ZONES
What will I need?
• Internet connection
• Be in the location where your setting up the zone /
ORdisconnected in that location
How do I set this up?
Simply follow instructions in the App
IDENTITY SET UP
What will I need?
A valid email address
ACCOUNTS SET UP
Can I add my personal accounts?
This facet currently utilizes test data from Yodlee at thistime
you cannot add personal accounts.
CUSTOMER SERVICE
Can I call the customer service number?
This feature is only activated for live paying customers,
if you have any questions please contact the sales
representative who issued the card.
AIRPLANE MODE
How do I temporarily
disconnecttheappfrommywallet?
Go to settings within wallet, turn on flight mode.
(You must be connected to the card and Bluetooth to
turnon flight mode).
How do I reconnect?
Turn off flight mode by simply pressing the button on your
Safedome card, thiswill reconnect you.
INFORMATION SHEET
DO NOT:
• Fold, cut, puncture, pierce or damage
• Expose to heat
• Submerge in water (the Safedome card
is water resistant, not waterproof)
Hidden battery
and micro chip
Power
button
25 MAY 2015 | SD INFORMATION SHEET
tt@maxwellforest.com
+1 (888) 417 5550 maxwellforest.com
FCC ID: 2ADPT-BT1CM3
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
• ︎Reorient or relocate the receiving antenna. !
• Increase the separation between the equipment and receiver. !
• Connect the equipment into an outlet on a circuit different from that
to which the !receiver is connected. !
• Consult the dealer or an experienced radio/TV technician for help.
!FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate this equipment. !
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. !
!