Smarthome Telephone Accessories Doorbell And Ring Detector Users Manual Tel. #1221
Smarthome Telephone Accessories ELK-930 1221
2015-02-02
: Smarthome Smarthome-Smarthome-Telephone-Accessories-Doorbell-And-Telephone-Ring-Detector-Users-Manual-446414 smarthome-smarthome-telephone-accessories-doorbell-and-telephone-ring-detector-users-manual-446414 smarthome pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
* Try these other fine ELK products * Magic Module Series MM443 Magic Module, 4 Input, 4 Output, Programmable MM443S Magic Module, Savoy Version of the MM443 MV120 Recordable Voice Module, 32 Channels MKHOME1 Home Control Kit for Caddx NX Controls MK400S Starter Kit, Includes MM443S & MK485 MK485 Programming Kit, MB485, Cables, Software MK410 X-10® Transceiver Kit, Programmed MM443 iButton™ Access Kit w/ MM443, MA100, MA101 MK420 MA100 iButton™ ‘Touchkey’ Reader & Interface Pack iButton™ ‘Touchkeys’,10 pcs w/keyring holders MA101 MA290 Proximity / Wiegand Data Interface to MM443 MB485 Data Bus Interface, RS232 to RS485 MC100 Clock / Calendar Module for MM443 ML8 Link Interface to Caddx NX Controls MT100 Temperature Sensor Module for MM443 MM220 Magic Module, 2 Input, 2 Output, Programmable Rust Free Sirens / Speakers 1RT Speaker & Stainless Steel Enclosure 150RT Siren & Stainless Steel Enclosure 155RT Voice Siren in Stainless Steel Box Speakers & Sirens 44 Speaker, 30 W,8 Ohm Compact Horn 45 Siren, Compact Horn, 118db 55 Voice Siren, Compact Horn M120 Siren, Single Tone, 107db, Mini Horn SP15 Speaker, 15 watt, Small Horn SP30 Speaker, 30 watt, Horn SP35 Speaker, 20 watt, Interior SP40 Speaker, 40 watt, Horn SS15 Siren, Dual Tone, 110db, Horn SS30 Siren, Dual Tone, 120db, Horn SS36 Siren, Dual Tone, 105db, Interior ECHO™ Sirens & Speakers 73 ECHO Speaker, 20 Watt, Interior 74 ECHO Dual Tone Siren, Interior 75 ECHO Voice Siren, Interior 870 ECHO Speaker, Self Amplified Siren & Voice Drivers 100 High Performance Siren Driver 110 Voice Siren Driver, English & Spanish 120 Recordable Voice Module and Siren 124 Recordable Voice Module, 4 Channels Surge Suppressors 950 Surge Suppressor, Phone & Power Line 951 Surge Suppressor, Phone - Single Line 955 Surge Suppressor, Phone - Dual Line Relay Modules 912 Compact Relay,12 Vdc, SPDT 912B Heavy Duty Compact Relay,12/24 Vdc, SPDT 924 Sensitive Relay, 12/24 Vdc, DPDT 941 Alarm Output Director 960 Delay Timer Relay, 1 sec. to 60 min. Power Products 1240 Battery, Lead Acid, 12v,4Ah 1270 Battery, Lead Acid, 12v,7Ah 12100 Battery, Lead Acid, 12v,10Ah 12170 Battery, Lead Acid, 12v,17Ah 12250 Battery, Lead Acid, 12v,25Ah P1212 12 Volts DC, 1.2 Amp Power Supply P1216 12 Volts DC, 1.6 Amp Power Supply P624 Power Supply & Battery Charger PD9 Power Distribution Module 965 Low Battery Cutoff and Power Switch TRG1640 Transformer, 16.5VAC @ 40 VA TRG2440 Transformer, 24VAC @ 40 VA Accessories 129 Computer Sound Card Interface 800 Audio Amplifier, 10 Watts 900-2 “B” Connectors,Unfilled,500 pcs 902-2 “B” Connectors,Gel filled,500 pcs 980 Telephone Line Fault Monitor 998 Warning Alarm System Decals 999 Double Sided Tape SL1 Strobe Light, 4 colors available WK1 Wall Mount Kit for SL1 Strobes For more information contact your local Distributor or: ELK PRODUCTS,INC (828)397-4200 FAX( 828)397-4415 http://www.elkproducts.com Email: info@elkproducts.com Printed in USA Doorbell & Telephone Ring Detector ELK-930 APPLICATION: The ELK-930 performs three (3)functions. It can detect ring activation from one or two doorbell buttons and a single telephone line. It conveniently isolates the voltage and current and produces an open collector (pull to ground) output which can be used to trigger an automation controller, relay, timer, etc. The circuit is pre-scored so that the individual detectors may be snapped off (separated) from each other. Doorbell & Telephone Ring Detector FEATURES: Doorbell • Detects Doorbell Activation Current • Inputs for Two Separate Pushbutton Locations • No Interference With Lighted Pushbuttons • Produces an Open Collector Output • Powered by the Doorbell Transformer Telephone • Detects Telephone Ringing Voltage • Provides an Open Collector Output that follows the ringing pattern • Lifetime Limited Warranty, call or visit our website for details SPECIFICATIONS: • Max Input on Doorbell Boards: 24 Volts A.C. • Max Output : 40mA @ 12 Volts D.C. • Doorbell Detection Current: 900mA min. • Total Dimensions: 3.4" x 2.75" x .625" SMARTHOME™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #1221 Features and Specifications subject to change without notice. (828)397-4200 Voice (828)397-4415 Fax http://www.elkproducts.com email: info@elkproducts.com PO Box 100 • Hwy. 70W • Hildebran, NC 28637 • USA Instructions Printed On Inside L491 4200 INSTALLATION The ELK-930 doorbell detector monitors the current draw of a doorbell and produces an open collector output when the pushbutton is pressed and the doorbell draws 900mA or more. This open collector output can be used to trigger an automation controller input that utilizes high to low switching (pull to ground) for activation. There are two basic installation methods: Method 1 requires only 1 of the ELK-930 doorbell detectors and free access to the wires leading from the doorbell transformer. The ELK-930 will activate when the doorbell rings, regardless of a single pushbutton or two (front door, back door) pushbuttons. 1. Mount the ELK-930 at any convenient location along the path of the two wires leading from the transformer to the doorbell. 2. Cut one of the two transformer wires. Strip the ends and place one under each of the doorbell detector INPUT terminals. 3. Run a two conductor wire from the doorbell detector output terminals to the automation controller or device to be activated. 4. Connect one wire from the "NEG" terminal to a common NEG terminal of the controller. Connect the other wire from the "OUT" terminal to one of the input zones on the controller. Input Automation Equipment Input Open Collector Output Max. rating: 12V, 40mA ELK-930 Doorbell Detector Negative A DOORBELL FRONT DOOR INPUT Lighted Doorbell Pushbuttons BACK DOOR INPUT Cut and splice ELK-930A or B into this line TRANSFORMER Back Door Front Door TO 120 VOLTS AC OUT NEG INPUT DOORBELL TRANSFORMER X 10 TO 16 VOLTS AC Method 1 Method 2 requires both ELK-930 doorbell detectors and free access to both of the pushbuttons wires. Detector A will activate when the front door pushbutton is pressed and Detector B will activate when the back door pushbutton is pressed. 1. Mount the ELK-930 near the Automation Equipment. 2. Run a four conductor wire to the doorbell location. 3. Connect one pair of the four conductor to the INPUT terminals on Detector A and the other pair to the INPUT terminals on Detector B. At the doorbell location splice one pair of the four conductor in series between the front door wire and the transformer common. Splice the other pair between the back door wire and the transformer common. 4. For each doorbell detector connect one wire from the "NEG" terminal to a common NEG terminal of the controller. Connect the other wire from the "OUT" terminal to one of the input zones on the controller. Automation Equipment Input 1 from Front Door Input Negative DOORBELL ELK-930 Doorbell Detector FRONT DOOR INPUT Lighted Doorbell Pushbuttons A OUT NEG INPUT Front Door BACK DOOR INPUT TRANSFORMER Back Door Open Collector Output Max. rating: 12V, 40mA Automation Equipment Input 2 from Back Door Input Negative ELK-930 Doorbell Detector B OUT NEG TO 120 VOLTS AC 4 Conductor Cable from Automation Equipment to Doorbell Location DOORBELL TRANSFORMER INPUT 10 TO 16 VOLTS AC Method 2 The ELK-930 telephone ring detector monitors the voltage on the telephone line and produces an open collector output (pull to ground) when the telephone ringing voltage is approximately 50 Volts or greater. The output follows the ringing pattern. Input Automation Equipment Open Collector Output Max. rating: 12V, 40mA TELEPHONE RING DETECTOR Negative ELK-930 SMARTHOME™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #1221 Telephone Dmark Block C OUT NEG R T To House Phones TIP RING Incoming Telephone Line
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Create Date : 2000:10:23 07:21:11 Producer : Acrobat Distiller 4.05 for Windows Subject : Automation Title : Doorbell and Tel. Ring Detector #1221 Author : SMARTHOME™ Creator : Adobe PageMaker 6.52 Modify Date : 2001:04:23 13:21:31 Page Count : 2 Has XFA : NoEXIF Metadata provided by EXIF.tools