Smartware PSTSTAT4 INDUSTRIAL PASSPORT STATION User Manual PST STAT 4

Smartware INDUSTRIAL PASSPORT STATION PST STAT 4

User manual - RPM-PSTSTAT4.pdf

PST-STAT-4 - User Manual V1R01a Date: June 2018 © 2018, Smartware 1 INDUSTRIAL PASSPORT STATION (2 HEADS, 4 HEADS) PST-STAT-2 PST-STAT-4 USER MANUAL INDUSTRIAL PERSONALIZATION READER FOR SMART CARDS V1R01a
PST-STAT-4 - User Manual - V1R01a Copyright All rights of translation adaptation and reproduction by any mean reserved for all the countries. Any reproduction or any complete or partial representation of the pages published in this work, made without the written permission of SMARTWARE is illicit and constitutes an imitation, whatever mean is used. Only reproductions strictly reserved for the private use of the purchaser and not intended to be used collectively are authorized. So are the short quotations justified by the scientific or informative nature of the work which they are extracted from (art L.122-4 L. 122-5 and L. 335-2 of the French Code ruling on intellectual property). © SMARTWARE, Les ULIS, France, 1999-2018 Disclaimers Information in this document is subject to change without notice and does not represent a commitment on the part of SMARTWARE. 2 © 2018, Smartware
PST-STAT-4 - User Manual V1R01a © 2018, Smartware 3 Table of Content 1 Abbreviations and symbols ......................................................................... 4 2 Overview ...................................................................................................... 5 3 Overview ...................................................................................................... 6 4 Block Diagram ............................................................................................. 7 5 Functionnal Description .............................................................................. 8 5.1 Communication protocols and standards ....................................................................... 8 6 Technical Characteristics ........................................................................... 9 6.1 Electrical characteristics .................................................................................................. 9 6.2 Operating environment ..................................................................................................... 9 7 Regulatory ................................................................................................. 10 7.1 Grants ............................................................................................................................... 10 7.2 Warning to users ............................................................................................................. 10 7.3 Labelling ........................................................................................................................... 11 8 Contact information .................................................................................. 12 9 Revision history ......................................................................................... 12
PICC2 US FCC CEM EMC Passport Station - Erreur ! Nom de propriété de document inconnu. V1R01a 4 © 2018, Smartware 1 ABBREVIATIONS AND SYMBOLS BPSK Binary Phase-Shift Keying CPU Central Processing Unit ETU Elementary Time Unit EUT Equipment Under Test FCC Federal Communications Commission IEC International Electrotechnical Commission ISO International Standards Organization LAN Local Area Network n/a Not Applicable or Not Available NRZ Non-Return to Zero P/N Part Number PCB Printed Circuit Board PICC Proximity Integrated Circuit Card RF Radio Frequency RFID Radio Frequency IDentification S/N Serial Number OOK On-Off Keying.
PICC2 US FCC CEM EMC Passport Station - Erreur ! Nom de propriété de document inconnu. V1R01a © 2018, Smartware 5 2 OVERVIEW The Industrial Passport Stations PST-STAT-2 and PST-STAT-4 are two-head and four-head smartcard readers dedicated to personalization of smart cards in an industrial environment. Contactless interfaces features Supported Protocols: - ISO/IEC 14443 (parts 2, 3 and 4) - MasterCard PayPass - Sony FeliCaTM - NXP MIFARETM and MIFARE PlusTM - ISO/IEC 15693 - Proprietary protocols Key Programmable Parameters: - RF output level - Communication speed up to 848 kbps - Communication protocol parameters Other features - In-system firmware updates Target Application • Production environment • Contactless reader/encoder Electrostatic discharge sensitivity The Passport Station uses semiconductors that can be damaged by electrostatic discharge (ESD). Observe precautions for handling. Damage due to inappropriate handling is not covered by the warranty.
PICC2 US FCC CEM EMC Passport Station - Erreur ! Nom de propriété de document inconnu. V1R01a 6 © 2018, Smartware 3 OVERVIEW The Passport Station is a standalone equipment. It is powered by an external DC supply and connected to computer equipment through a LAN over an Ethernet cable. LANCablePowerCable4 heads(antennas hidden)US-CORE and US-PICC2assembly (in shielding)FCC Grant Label
PICC2 US FCC CEM EMC Passport Station - Erreur ! Nom de propriété de document inconnu. V1R01a © 2018, Smartware 7 4 BLOCK DIAGRAM The Passport Station chassis comprises • one US-CORE board • one or two US-PICC2 boards • two or four antennas The following figure shows a simplified block diagram of the Passport Station (with 4 heads). Detailed information may be found in the US-PICC2 and US-CORE datasheets. US-PICC2#2RF interface #3RF interface #4US-CORELAN interfacePower inputUS-PICC2#1RF interface #1RF interface #2US-PICC2 and US-CORE Assemblycoaxial cablesto LAN DC supplyPassport Stationmagnetic couplingContactlessSmartcard #1ContactlessSmartcard #2ContactlessSmartcard #3ContactlessSmartcard #4Antenna Coil #1Antenna Coil #2Antenna Coil #3Antenna Coil #4Ethernet Cat. 6 cablePower cableShielding
PICC2 US FCC CEM EMC Passport Station - Erreur ! Nom de propriété de document inconnu. V1R01a 8 © 2018, Smartware 5 FUNCTIONNAL DESCRIPTION US-PICC2 includes two or four contactless interfaces to communicate with contactless smart cards and smart objects. Smartware MLOS system and CARD package manage most of the functionalities of the US-PICC2. Please refer to their documentation for more information. 5.1 COMMUNICATION PROTOCOLS AND STANDARDS Embedded software provides the following functionalities: • Adjustable field strength • Timing parameters management such as FWT, FDT, EGT… • Several protocol parameters management such as FSCI, FSDI, SOF, EOF, NAD, CID… • Frame blocks error and recovery mechanism • Raw mode access to support user custom protocols
PICC2 US FCC CEM EMC Passport Station - Erreur ! Nom de propriété de document inconnu. V1R01a © 2018, Smartware 9 6 TECHNICAL CHARACTERISTICS 6.1 ELECTRICAL CHARACTERISTICS POWER SUPPLY MIN TYPICAL MAX Input voltage 10.8 V 12 V 13.2 V Input Current (Vcc = 12 V) 1200 mA 1400 mA 2000 mA 6.2 OPERATING ENVIRONMENT OPERATING ENVIRONMENT MIN TYPICAL MAX Operating temperature 5°C 20°C 40°C
PICC2 US FCC CEM EMC Passport Station - Erreur ! Nom de propriété de document inconnu. V1R01a 10 © 2018, Smartware 7 REGULATORY 7.1 GRANTS The US-PICC2 is CD, FCC modular approval, and RoHS compliant. 7.2 WARNING TO USERS Warning 1: The US-PICC2 is considered as a component that will be operated in combination with the final equipment. Then, the final equipment (including power supply system) still needs to re-confirm that the whole system complies with the local EMC directives. Warning 2: The US-PICC2 model is a low power radiofrequency emitter, and then specific precaution should be taken to restrict the human presence near the antennas. We recommend that persons should be at least at 20 cm far from the emitting antennas. This information also has to be mentioned in the end product. Access should only be authorized to qualified personal. If the product is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Warning 3: To reduce the risk of fire or injury to persons, follow these instructions: All maintenance and servicing of this device must be performed in a safe area away from hazardous locations. Disconnect all power before servicing. Use an earthed bracelet to avoid ESD damages. Power supply must be SELV, no energy hazard. Warning 4: To comply with directives, the backplane Ethernet cable length should be less than 3 meters. Warning 5: This device has been designed to operate with the antenna(s) listed below. Antennas not included in this list are strictly prohibited for use with this device List of acceptable antenna(s): - 5207A-02050 Warning 7: To comply with directives, RF power may be set from power 0 to power 10. Warning 8: In case of collocated transmitters, the maximum number of transmitters in a small place should be 48. Warning 9: The product shall not be modified without written authorisation of Smartware. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Warning 10: The end product’s sticker should mention that it “contains a FCCID: RPM – USPICC201 product. Warning 11: WARNING TO USERS IN THE UNITED STATES Federal Communication Commission Interference Section 15.105 Information to the user
PICC2 US FCC CEM EMC Passport Station - Erreur ! Nom de propriété de document inconnu. V1R01a © 2018, Smartware 11 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC RF radiation exposure limits set forth for general population. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. NO UNAUTHORIZED MODIFICATIONS 47 CFR Section 15.21 CAUTION: This equipment may not be modified, altered, or changed in any way without signed written permission from Smartware. Unauthorized modification may void the equipment authorization from the FCC and will void the Smartware warranty. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 7.3 LABELLING The following label is affixed on the product:
PICC2 US FCC CEM EMC Passport Station - Erreur ! Nom de propriété de document inconnu. V1R01a 12 © 2018, Smartware 8 CONTACT INFORMATION For more information, please send an email to: support@smartware.fr For ordering information, please send an email to: sales@smartware.fr 9 REVISION HISTORY VERSION DATE AUTHOR DESCRIPTION OF CHANGES V1R01a June 2018 MZ Creation

Navigation menu