Soaring Helmet Vega Helmet VTCS-SLY501 V-Tune Helmet Bluetooth Headset User Manual BluetoothManual

Soaring Helmet Corporation DBA Vega Helmet V-Tune Helmet Bluetooth Headset BluetoothManual

Users Manual

Bluetooth Headset Manual Introduction Bluetooth is a wireless protocol for exchanging wireless data and voice communication. It establishes low-cost networks for fixed and mobile devices based on short distance wireless connection. In recent years, the demand for wireless communication services is fast-growing. Bluetooth technology has a large variety of applications, including mobile phones, telephones, computers, and GPS. As the most rapidly-developing wireless communication technology, Bluetooth technology will be applied to every aspect of daily life. Features 1. The latest Bluetooth technology: Bluetooth 2.0 with Enhanced Data Rate (EDR). It is backward-compatible with the previous version 1.1 and 1.2. 2. Compatible Bluetooth Profiles: Earphone, hand-free devices, A2DP and AVRCP 3. Listen to music from your Bluetooth cell phones 4. Connect to a multitude of Bluetooth devices including cell phones and GPS 5. Dual track stereo earphone ensures optimum sound quality 6. Receive and initiate phone calls via a single button. Available range is 10 meters in an unblocked region. 7. Widely compatible with all Bluetooth cell phones. 8. Effective distance range among devices: >10meters
Functions and definitions Turning on your headset To turn your headset on, press and hold the multi-function button for 2 seconds until you hear a short “beep”, the blue indicator light will also flash at the same time. Then release the button. Turning off To turn your headset off, press and hold the multi-function button for 5 seconds until the Bluetooth headset is turned off. Pairing your headset with other devices I. Two Bluetooth headsets 1.1 Put two Bluetooth headsets within 1 meter of each other, and make sure there is no other Bluetooth headset under pair condition within 10 meters. 1.2 With the two headsets powered off, press and hold multi-function button of both headsets for 6 seconds until you hear two “beep” sounds and the indicator light flashes alternatively in the color of blue and red. 1.3 With the indicator lights of both headsets flashing alternatively in the color of blue and red, press the multi-function button of any of the two headsets. 1.4 The headset with pressed button will automatically search for the other Bluetooth headset, and both will be under pairing condition automatically. 1.5 Once successfully paired, the indicator lights of both headset stops flashing in two colors. Instead, only blue indicator lights flashes. Please note: This Bluetooth Helmet can only pair with the earphone produced by the same company. II. Bluetooth headset and cell phone 2.1 Put the Bluetooth headset and Cell phone within 1 meter distance. 2.2 Make sure the Bluetooth Headset is powered off 2.3 Press and hold multi-function button for the Bluetooth headset for 6 seconds until you hear a “beep” and the indicator light flashes alternatively in the color of blue and red. 2.4 Following the instructions from manual guide of your cell phone, enable the Bluetooth function of your cell phone. It then should begin searching for Bluetooth devices. 2.5 Once the phone lists all Bluetooth devices it finds, select “Dellking”. Press OK or Yes to pair the Bluetooth headset. Enter the passkey: 0000 and press OK. Then the indicator light flashes in the color of blue. Until you hear a “beep”, it indicates the Bluetooth headset and phone pair successfully. It will enable audio transfer from the phone and controlling phone via the buttons from Bluetooth headset. Two-way Radio function 1. Enabling Two-way Radio
After two Bluetooth head sets pair successfully, press the multi-function button of any one of the two headsets to enable the two-way radio function 2. Ending Two-way Radio Press the multi-function button of any of the headsets after two way radio has been enabled to end two-way radio communication. Phone function 1. To answer a call Press multi-function button when there is a call coming. You can also use cell phone to answer the call. 2. To answer calls automatically This headset will answer incoming calls automatically after two ring tones (about 8 seconds) if there is no action within that 8 seconds. 3. Reject an incoming call Once you hear a ring tone, press and hold the multi-function button for 2 seconds until you hear a “beep”. This will reject the incoming call. 4. End a call Press the Multi-function button while answering a call to end the conversation. 5. Transfer a call between headset and phone While answering a call through headset, press and hold multi-function button for 2 seconds until you hear a “beep”. Then you can answer the call through your cell phone. Press multi-function button again for 2 seconds until you hear a “beep”. Then you can answer the call through the headset. 6. Redial last call With connecting with cell phone, press and hold the multi-function button for 2 seconds until you hear a “beep”. 7. Make a voice dial call Double-click multi-function button when the headset is connected with phone. The function of “rejecting a call”, “Transferring a call between headset and phone” and “redialing the last call” requires a cell phone that supports Hands-free profile. “Voice dial call” also requires the cell phone is equipped with the function that supports voice call. Stereo Audio function 1. Skipping to next song During the music playback, press the Next button to skip to the next song. 2. Skipping to previous song During the music play back, press the Previous button to skip to the previous song. Please note: These functions requires the cell phone supports Bluetooth A2DP and AVRCP profile. Adjusting the volume During the music play back, phone call and two way video, press volume +, volume- button repeatedly to adjust volume level. A “ding dong” sound would mean that the
devices has reached the maximum or minimum volume. Automatic Function switching function 1. During the music play back or two-way radio, if there is an incoming call, the headset switches to answer the call. When phone call ends, headset switches back to music play back or two way radio automatically. If phone call is ended by the other party, music play back and two way radio will continue automatically. 2. During the music play back, press the multi-function button to pause music play back and switch to two-way radio. When two-way radio ends, it will switch to music play back automatically. Please note: it takes about 4 seconds to switch from phone call to two-way radio. Blue LED indicator light Function Headset indicator Power off Off Pairing mode Blue and Red lights flash alternatively Paring successful Blue light flashes for 5 times Disconnected with phone Blue light flashes quickly every 2 seconds Connected with phone Blue light flashes every 2 seconds Battery Low Red light flashes every 3 seconds Battery charging Red light flashes every 1 second Battery charging complete Red light: on (steady) Battery Charge There is an integrated battery inside the headset which needs to be charged before use. It takes about 3.5 hours to fully charge the battery. You can use either an AC adapter or an USB cable charger through computer. A completely charged battery provides up to 400 hours in standby status or up to 5 hours of music playback or phone call. Please Note: 1. Please connect USB cable gently. Putting too much force may break the headphone. 2. In order to prolong battery life, please keep battery in temperatures between 59°F and 77°F The usage scope of headphone To ensure effective usage, the optimum range between Bluetooth devices is 10 meters.
Signal transmission does not require visible distance. It can transmit through wall or other non-metallic obstacles. However, thick layers of concrete will reduce effective distance range. Caution: User changes or modifications to this system not expressly approved by the manufacturer could void user’s authority to operate this equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu