Solectek 58WAN3 Wireless Network Transceiver User Manual antennas

Solectek Corporation Wireless Network Transceiver antennas

Contents

antennas

♦ Fits ARC’s IES™ Gen I & Gen II Enclosures—SOLD SEPA-RATELY— Part #ARC-IE1001K02 or Part #ARC-IE2000K01, both include mounting bracket ♦ US Engineered ♦ Manufactured under strict US quality control procedures ♦ High gain, competitive pricing ♦ Low profile and rugged design for outdoor use ♦ Custom Enclosures available ARC Wireless Solutions, Inc. ● 10601 I-70 Frontage Rd., N ● Wheat Ridge, CO 80033-2660 ● Phone 303.421.4063 ● Toll Free 800.508.6532 ● sales@antennas.com www.antennas.com “Patented Antenna Solutions” Specifications subject to change without notice RF Patterns Horizontal Cut, typ. RF Patterns Vertical Cut, typ. Electrical Specifications Frequency Range 5.15—5.875 GHz Gain 24dBi Vertical 23dBi Horizontal 3dB Beamwidth Vertical/Horizontal 8 degrees/8 degrees ETSI ETSI 2, 3, and 5 VSWR 5.15-5.35GHz 5.35-5.875GHz ≤2.0:1 max ≤1.5:1 typ., ≤1.7:1 max. Port to Port Isolation 40dB (minimum) Front-to-Back Ratio >40 dBi Cross Polarization >30 dBi Sidelobe Level >12 dBi Power Rating 30 watts Impedance 50 ohms Lightning Protection DC ground 5.15-5.875GHz 24/23dBi Dual Polarization Panel Antenna for ARC IES™, Integrated Enclosure Solution Ordering Information Part # Description ARC-ID5823B88 5.8GHz 24/23dBi Dual Pol, R/A SMA Jack Shipping Information Sizes and Weights Description 18.625” x 15.3” x 15.25” (473mm x 388.6mm x 387.4mm) 34 lbs (15.4 kg) Bulk Pack, includes 10 in an overpack box Don’t see what you need? Contact us to discuss alternate configurations Mechanical and Environmental Specifications Length x Width x Depth 15.2in x 15.2in x 1.12in (386mm x 386mm x 28.4mm) Weight 3.6lbs (1.66kg) Backplane Aluminum Radome UV stabilized ABS plastic, gray Wind Survivability 125mph (201kph) Wind Load 1.6ft² (0.148m²) Operating Temperature Range -49°F to 149°F (-45°C to 65°C) Pole Mount Diameter Range 0.75in to 3.0in (19mm to 76mm) Environmental IP 67 Connector (2) R/A SMA Jack RF Patterns Vertical Cut, typ. RF Patterns Horizontal Cut, typ. Vertical Polarization Horizontal Polarization -30 -25 -20 -15 -10 -5 0302106024090 2701203001503301800 -30 -25 -20 -15 -10 -5 0302106024090 2701203001503301800 -30 -25 -20 -15 -10 -5 0302106024090270120300150330180 0 -30 -25 -20 -15 -10 -5 0302106024090270120300150330180 0
global solutions :local supportTMHD SeriesTM High Performance Dish Antennas4900 to 5875 MHz OperationThe new HD Series dish antennas offered by Laird Technologies offer the system engineer the best performance available on the market. The antennas meet ETSI EN 302 085 TS4/TS5 and EN 300 833 Class 1 specifications, the most stringent specifications for point to point backhaul antennas. The unique feed system is available in a single polarization version which can be mounted for either vertical or horizontal polarization. There is also a dual polarized version available for those systems which can utilize dual polarization to increase bandwidth or implement diversity. An optional fiberglass radome is available for added environmental protection.Features and Benefits: •Widebandoperation •Verticallyorhorizontallypolarized •Dualpolaritymodelsavailable •Ultralowsidelobes,meetsETSIstandards •ExtremelyruggedforlongservicelifeinextremeenvironmentsApplications •802.11aapplications •OFDMsystems •Cellularbackhaul •Point-to-pointbackhaul •PublicsafetycommunicationsHDDA5Wwww.pacwireless.comor visit: www.pacwireless.comFor sales information: Telephone 801-572-3024E-Mail sales@pacwireless.com
jljljljHDDA5Wglobal solutions :local supportTMANT-SPEC-HDDA5W-1207Any information furnished by Laird Technologies and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials rests with the end user since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability, or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies domestic terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request. Specifications subject to change without notice.Model 100MPH 125MPHHDDA5W-29 113 177HDDA5W-29 with Radome 75 116HDDA5W-32 256 400HDDA5W-32 with Radome 111 174Wind Loading (Lbs.)SpecicationsParameter Min Typ Max UnitsFrequency Range (Single Pol.) 4900 5875 MHzFrequency Range (Dual Pol. ) 5150 5850 MHzVSWR (Single Pol.) 1.5:1VSWR (Dual Pol.) 1.8:1Impedance 50 OHMInput Power 100 WMechanical Downtilt 30 degPole Diameter (OD) 2” (50) 4” (101.6) Inch (mm)Operating Temperature -40 +70 Deg CParameter HDDA5W-29-xx HDDA5W-32-xxGain 29dBi 32 dBiBeam Width 6 deg 4 degSidelobes -32dB -32 dBFront to Back -32dB -38 dBCross Pole -32dB -34dBWeight 11lb (5kg) 22lb (10kg)Dimensions (Diameter) 25.5 (648mm) 36.5 (927mm)Notes: • All shipments F.O.B. Schaumburg, IL 60173 • All antennas carry a 2 Year WarrantyTypical Antenna Patterns With ETSI LimitsSystem Ordering: HDDA5W-29 - 29dBi single polarity (H or V) HDDA5W-29-DP - 29dBi dual polarity (H and V) HDDA5W-32 - 32dBi single polarity (H or V) HDDA5W-32-DP - 32dBi dual polarity (H and V)

Navigation menu