Somfy Systems TELIS1 Remote Control Transmitter User Manual FCC Statement

Download:
Mirror Download [FCC.gov]
Document ID	739732
Application ID	MkZ6n1UzSA+0/Xs7QhsAfw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.44kB (18029 bits)
Date Submitted	2006-12-18 00:00:00
Date Available	2006-12-18 00:00:00
Creation Date	2006-12-12 10:11:00
Producing Software	AFPL Ghostscript 8.53
Document Lastmod	2006-12-12 17:10:16
Document Title	FCC_Statement
Document Creator	PDFCreator Version 0.9.0
Document Author:	jim_h

INSTALLATION guide-Telis 1
1. Characteristics:
•
•
•
•
Power: 3V lithium battery, CR 2430
Operating Temperature: +5°C to +40°C
Range: Minimum 90’
Battery Life: 3 years assuming 4 operations per day
2. Programming:
• While the RTS motor is in programming mode, press
the PROG button located on the back of the
transmitter.
• A series of three beeps will be heard from the RTS
motor indicating the RTS motor has been
successfully programmed.
• Press the PROG button on the transmitter to exit the
programming mode.
3. Operation:
• Press the UP, STOP, or DOWN button for desired
operation.
• During transmission, the LED on the front of the
transmitter will illuminate. If it doesn’t replace the
battery.
Hand Held Transmitters
(1810632, 1810643, 1810639, 1810650)
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a CLASS B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try and correct the interference by one or more of the
following measures:
1.1 Reorient or relocate the receiving antenna.
1.2 Increase the separation between the equipment and receiver.
1.3 Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
1.4 Consult the dealer or experienced radio/TV technician for help.
Warning
Changes or modifications not expressly approved buy the manufacturer could void the user’s
authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2006:12:12 10:11:00-05:00
Modify Date                     : 2006:12:12 17:10:16-05:00
Subject                         : 
Page Count                      : 2
Producer                        : AFPL Ghostscript 8.53
Creation Date                   : 2006:12:12 10:11:00-05:00
Mod Date                        : 2006:12:12 17:10:16-05:00
Author                          : jim_h
Keywords                        : 
Metadata Date                   : 2006:12:12 17:10:16-05:00
Title                           : FCC_Statement
Creator                         : jim_h
Description                     : 

EXIF Metadata provided by EXIF.tools