Somfy Systems VC SWF Virtual Cord Remote Conrol VC-01 User Manual

Somfy Systems SWF Virtual Cord Remote Conrol VC-01 Users Manual

Users Manual

Thank you for purchasing this fine window treatment proudly constructed by us. Your shade has been custom-sized

to your personal specifications with the highest standards of quality and craftsmanship. We have confidence that it will

provide you with many years of beauty andeasy maintenance. Enjoy!

Follow the easy step-by-step instructions to install your shade. Should you need additional support, please feel free to

call our Customer Service Center at 1-800-221-6352 or email us at windowfashions@springswindowfashions.com. We

will be glad to help you. Again, we appreciate that you have chosen us to enhance the design and look of your home.

Gracias por adquirir este fino tratamiento de ventana orgullosamente fabricado para usted. Su persiana ha sido hecha

a la medida del cliente según sus especificaciones personales con los más altos estándares de calidad y trabajo

artesanal. Nosotros tenemos la confianza que le proveerá muchos años de belleza y fácil mantenimiento. ¡Disfrútela!

Siga las fáciles instrucciones “paso a paso"para instalar su persiana. Si necesita ayuda adicional, favor de proceder con

toda libertad llamando al Centro de Servicio al Cliente al teléfono 1-800-221-6352 o enviando un correo electrónico

awindowfashions@springswindowfashions.com. Estaremos muy dispuestos para ayudarle. Nuevamente, nosotros

apreciamos que nos haya escogido para mejorar el diseño y la apariencia de su hogar.

Merci d’avoir acheté ce superbe traitement de fenêtre que nous sommes fiers d’avoir exécuté pour vous. Votre

store a été fait sur mesure selon votre propre cahier des charges dans un souci d’excellence et de la plus haute

technicité. Nous ne doutons pas qu’il vous offrira des années de beauté et d’entretien facile Profitez-en bien !

Pour installer votre store, veuillez suivre les instructions détaillées. Si vous avez des questions n’hésitez pas à

prendre contact avec notre Centre de service après-vente en téléphonant au 1-800-221-6352 ou par courrier

électronique au windowfashions@springswindowfashions.com. Nous vous aiderons avec plaisir. Encore une fois,

nous vous remercions de nous avoir choisi pour améliorer et embellir votre intérieur.

Determine inside/ceiling or outside mount

Determine el montaje interior/de techo o exterior

Choisir la pose intérieure/au plafond ou extérieure

Place shade in desired location, mark corners

Coloque la persiana en la ubicación deseada, marque las esquinas

Placer le store dans l’emplacement souhaité, marquer les coins

Inside/ceiling mount

Montaje de techo/interior • Pose intérieure/au plafond

Outside mount

Montaje exterior • Pose extérieure

Mark screw locations; center additional brackets, if applicable

Marque la ubicación de los tornillos; centre los soportes adicionales, si

es aplicable

Marquer l’emplacement des vis; centrer les supports supplémentaires, le

cas échéant

Inside/ceiling mount

Montaje de techo/interior

Pose intérieure/au plafond

Outside mount

Montaje exterior

Pose extérieure

Optional extension bracket

Soporte de extensión opcional

Rallonge (en option)

1/4"

6,4 mm

1/4" to front of bracket for

flush mount

6,4 mm desde el frente del

soporte para un montaje a ras

6,4 mm jusqu’à l’avant

du support pour montage

encastré

If mounting the battery case, mark battery screw locations

Inside/ceiling mount

Montaje de techo/interior • Pose intérieure/au plafond

Outside mount

Montaje exterior • Pose extérieure

On right end of window, hold battery case 1" behind

and 2" to the left of the rear bracket screw location and

mark.

For a second reloadable battery

case

, mount the

second set 5" to the left of the first base and mark.

On right end of window, hold battery case 1” behind and

2” to the left of the rear bracket screw location and mark.

For a second reloadable battery

case

, mount the

second set 5” to the left of the first base and mark.

On right end of window, hold battery case 1” behind and

2” to the left of the rear bracket screw location and mark.

For a second reloadable battery

case

, mount the

second set 5” to the left of the first base and mark.

On right end of window, hold battery case 1/4" above and

to 2" the left of the left bracket screw location and mark.

For a second battery case, position base 5" tot he left of

the first base and mark screw locations.

On right end of window, hold battery case 1/4” above and

to 2” the left of the left bracket screw location and mark.

For a second battery case, position base 5” tot he left of

the first base and mark screw locations.

On right end of window, hold battery case 1/4” above and

to 2” the left of the left bracket screw location and mark.

For a second battery case, position base 5” tot he left of

the first base and mark screw locations.

Measure in from both ends and mark

Mida desde los dos extremos y marque

Mesurer à partir de chacune des extrémités et marquer

Inside/ceiling mount

Montaje de techo/interior • Pose intérieure/au plafond

Outside mount

Montaje exterior • Pose extérieure

15,2 cm

1/16" drill bit

Broca de 1,6 mm

Mèche de 1,6 mm

Everything needed to install your shade

Todo lo necesario para instalar su persiana.

Tout le nécessaire pour installer votre store

Tools needed • Herramientas necesarias • Outillage nécessaire

Shades over 3,600 in2 (4,200 Roman) will have 2 battery cases • Shades over 3,600 in2 (4,200

Roman) will have 2 battery cases • Shades over 3,600 in2 (4,200 Roman) will have 2 battery

cases

Single cell

Celda sencilla

Cellulaire simple

Double cell

Celda doble

Cellulaire double

Pleated

Plisada

Plissé

Bracket chart (items 3, 4, 8 & 10)

Tabla de soportes

Tableau des supports

Ordered width Bracket quantity

Ancho ordenado Cantidad de soportes

Largeur commandée Quantité de boîtier

Up to 42" • hasta 106,7 cm • jusqu’à 106,7 cm 2

421⁄16" to 72" • 106,8 cm hasta 182,9 cm • 106,8 cm jusqu’à 182,9 cm 3

721⁄16" to 102" • 183 cm hasta 259,1 cm • 183 cm jusqu’à 259,1 cm 4

1021⁄16” to 132” • 259,2 cm hasta 335,3 cm • 259,2 cm jusqu’à 335,3 cm 5

1321⁄16” to 144” • 335,4 cm hasta 365,9 cm • 335,4 cm jusqu’à 365,9 cm 6

Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade.

HOW TO INSTALL

CÓMO INSTALAR

COMMENT INSTALLER

79056-00 (07/14)

Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com

15,2 cm

1 Shade

2 Brackets/Screws

3 Optional Extension Brackets

4 Reloadable battery case (optional)

5 Battery hanger/Screws

6 Plug-in Transformer (optional)

7 8 AA Batteries (optional)

1 Shade

2 Brackets/Screws

3 Optional Extension Brackets

4 Reloadable battery case (optional)

5 Battery hanger/Screws

6 Plug-in Transformer (optional)

7 8 AA Batteries (optional)

1 Shade

2 Brackets/Screws

3 Optional Extension Brackets

4 Reloadable battery case (optional)

5 Battery hanger/Screws

6 Plug-in Transformer (optional)

7 8 AA Batteries (optional)

AA8

Draft-Image Review Only 141209 (6-1814)

MOTORIZATION ILLUSTRATIONS_Motorized shade install guide

OUTSIDE

MOUNT

INSIDE MOUNT

Draft-Image Review Only 141209 (6-1814)

MOTORIZATION ILLUSTRATIONS_Motorized shade install guide

OUTSIDE

MOUNT

INSIDE MOUNT

If using optional Battery Hanger, skip ahead to step 8

Drill holes, screw brackets into place, and battery case if applicable.

Inside/ceiling mount

Montaje de techo/interior • Pose intérieure/au plafond

Outside mount

Montaje exterior • Pose extérieure

Optional extension bracket

Soporte de extensión opcional • Rallonge (en option)

Optional extension bracket: assemble brackets

Soporte de extensión opcional: ensamble los soportes • Support de projection en option : assembler les supports

Attach headrail brackets to extension brackets using screws and nuts.

Conecte los soportes del cabezal con los soportes de extensión utilizando tornillosy

tuercas.

Fixer les supports de boîtier aux rallonges à l’aide des vis et des écrous.

Looped

Lazada

En boucle

6Tilt the Headrail Bracket through the slot in the

Battery Hanger and press until snug

A B

SNAP

7Snap the Battery Pack Assembly on the backside of the window

shade

8Connect the wire lead from the

Battery Pack to the motor wire lead

A B

Shade

Headrail Bracket

Battery Pack Base

Battery Pack Lid

Battery Pack Hanger (optional)

8 AA Lithium Batteries

Screws (optional)

No tools required

Tools Needed - Herramientas necesarias - Outillage nécessaire

Hanger Bracket Option Screw Mount Option

Everything needed to install your battery pack

Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid

Align battery polarity with

labels on Battery Pack Lid

Reattach the Battery Pack Lid to the Battery

Pack Base by aligning the pegs with the

slots

Slide the Battery Pack Lid into the base

while depressing the button to lock

Attach the Battery Pack Hanger to the assembled Battery Pack

SNAP

1. Adding

Shade

Headrail Bracket

Battery Pack Base

Battery Pack Lid

Battery Pack Hanger (optional)

8 AA Lithium Batteries

Screws (optional)

No tools required

Tools Needed - Herramientas necesarias - Outillage nécessaire

Hanger Bracket Option Screw Mount Option

Everything needed to install your battery pack

2Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid

Align battery polarity with

labels on Battery Pack Lid

3Reattach the Battery Pack Lid to the Battery

Pack Base by aligning the pegs with the

slots 4Slide the Battery Pack Lid into the base

while depressing the button to lock

5Attach the Battery Pack Hanger to the assembled Battery Pack

SNAP

Attach the battery pack hanger to the assembled battery case.

Tilt the headrail bracket tthough the slot in the battery hanger and press until snug.

Attach bracket with Battery Case to shade.

6Tilt the Headrail Bracket through the slot in the

Battery Hanger and press until snug

A B

SNAP

7Snap the Battery Pack Assembly on the backside of the window

shade

8Connect the wire lead from the

Battery Pack to the motor wire lead

A B

Adjusting the upper or lower limits of your shade, Vitrual Cord™

If adjusting the upper or lower shade limits, follow these steps:

Bring the shade to the upper or lower limit by pressing Up or Down button.

Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and

down movement).

The control and shade endcap will flash orange and then green, confirming that you are in programming

mode.

Adjust the shade using the Up or Down button to your desired new limit.

Press and release the shade endcap, the shade will jog.

The new limit is saved to the shade and programming is complete. The shade endcap light no longer

flashes.

If adjusting the upper or lower shade limits, follow these steps:

Bring the shade to the upper or lower limit by pressing Up or Down button.

Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and

down movement).

The control and shade endcap will flash orange and then green, confirming that you are in programming

mode.

Adjust the shade using the Up or Down button to your desired new limit.

Press and release the shade endcap, the shade will jog.

The new limit is saved to the shade and programming is complete. The shade endcap light no longer

flashes.

If adjusting the upper or lower shade limits, follow these steps:

Bring the shade to the upper or lower limit by pressing Up or Down button.

Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and

down movement).

The control and shade endcap will flash orange and then green, confirming that you are in programming

mode.

Adjust the shade using the Up or Down button to your desired new limit.

Press and release the shade endcap, the shade will jog.

The new limit is saved to the shade and programming is complete. The shade endcap light no longer

flashes.

79056-00 (07/14)

Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com

Mount shade, Battery Case and connect power cable.

Inside/ceiling mount

Montaje de techo/interior

Pose intérieure/au plafond

Outside mount

Montaje exterior

Pose extérieure

Optional extension bracket

Soporte de extensión opcional

Rallonge (en option)

Connect battery Cable

Conecte los alambres de la batería • Connecter les files de la pile

Operating your shade, Vitrual Cord™

Operando su persiana, Vitrual Cord™

Fonctionnement du store, Vitrual Cord™

Down

Light Indicator

Program Button

Shade Endcap/

Push Button Control

Shade Endcap/

Push Button Control

Shade Endcap/

Push Button Control

Shade

Headrail Bracket

Battery Pack Base

Battery Pack Lid

Battery Pack Hanger (optional)

8 AA Lithium Batteries

Screws (optional)

No tools required

Tools Needed - Herramientas necesarias - Outillage nécessaire

Hanger Bracket Option Screw Mount Option

Everything needed to install your battery pack

2Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid

Align battery polarity with

labels on Battery Pack Lid

3Reattach the Battery Pack Lid to the Battery

Pack Base by aligning the pegs with the

slots 4Slide the Battery Pack Lid into the base

while depressing the button to lock

5Attach the Battery Pack Hanger to the assembled Battery Pack

SNAP

Reattach the Battery Case lid to the Battery Case base by aligning the

pegs with the slots.

Reattach the Battery Case lid to the Battery Case base by aligning the

pegs with the slots.

Reattach the Battery Case lid to the Battery Case base by aligning the

pegs with the slots.

Shade

Headrail Bracket

Battery Pack Base

Battery Pack Lid

Battery Pack Hanger (optional)

8 AA Lithium Batteries

Screws (optional)

No tools required

Tools Needed - Herramientas necesarias - Outillage nécessaire

Hanger Bracket Option Screw Mount Option

Everything needed to install your battery pack

2Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid

Align battery polarity with

labels on Battery Pack Lid

3Reattach the Battery Pack Lid to the Battery

Pack Base by aligning the pegs with the

slots 4Slide the Battery Pack Lid into the base

while depressing the button to lock

5Attach the Battery Pack Hanger to the assembled Battery Pack

SNAP

Shade

Headrail Bracket

Battery Pack Base

Battery Pack Lid

Battery Pack Hanger (optional)

8 AA Lithium Batteries

Screws (optional)

No tools required

Tools Needed - Herramientas necesarias - Outillage nécessaire

Hanger Bracket Option Screw Mount Option

AA8

Everything needed to install your battery pack

2Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid

Align battery polarity with

labels on Battery Pack Lid

3Reattach the Battery Pack Lid to the Battery

Pack Base by aligning the pegs with the

slots 4Slide the Battery Pack Lid into the base

while depressing the button to lock

5Attach the Battery Pack Hanger to the assembled Battery Pack

SNAP

Shade

Headrail Bracket

Battery Pack Base

Battery Pack Lid

Battery Pack Hanger (optional)

8 AA Lithium Batteries

Screws (optional)

No tools required

Tools Needed - Herramientas necesarias - Outillage nécessaire

Hanger Bracket Option Screw Mount Option

AA8

Everything needed to install your battery pack

2Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid

Align battery polarity with

labels on Battery Pack Lid

3Reattach the Battery Pack Lid to the Battery

Pack Base by aligning the pegs with the

slots 4Slide the Battery Pack Lid into the base

while depressing the button to lock

5Attach the Battery Pack Hanger to the assembled Battery Pack

SNAP

Remove battery case lid, insert batteries into lid

Optional Battery Hanger

NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement.

Shade

Headrail Bracket

Battery Pack Base

Battery Pack Lid

Battery Pack Hanger (optional)

8 AA Lithium Batteries

Screws (optional)

No tools required

Tools Needed - Herramientas necesarias - Outillage nécessaire

Hanger Bracket Option Screw Mount Option

Everything needed to install your battery pack

2Remove the Battery Pack Lid from the Battery Pack Base and insert batteries into the Battery Pack Lid

Align battery polarity with

labels on Battery Pack Lid

3Reattach the Battery Pack Lid to the Battery

Pack Base by aligning the pegs with the

slots 4Slide the Battery Pack Lid into the base

while depressing the button to lock

5Attach the Battery Pack Hanger to the assembled Battery Pack

SNAP

BATTERIES

ALKALINE

BATTERIES

ALKALINE

1. Adding

Setting -

Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press

Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button,

the shade will jog. The position is saved to the shade, repeat to set a new home position.

Using -

Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade

position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is

actively moving, the Stop/Intermediate button would need to be pressed twice.

Setting -

Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press

Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button,

the shade will jog. The position is saved to the shade, repeat to set a new home position.

Using -

Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade

position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is

actively moving, the Stop/Intermediate button would need to be pressed twice.

Setting -

Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press

Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button,

the shade will jog. The position is saved to the shade, repeat to set a new home position.

Using -

Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade

position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is

actively moving, the Stop/Intermediate button would need to be pressed twice.

1. Adding

Adjusting the Upper or Lower Limit of your shade, Single Channel Remote

1. Adding

Adding a control, Virtual Cord™

Setting an Intermediate (Home) Position, Single Channel Remote

Adding a Control, Single Control Remote

If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control.

Press and hold the shade end cap until the shade jogs (a brief up and down movement).

The control and shade endcap will flash green with solid red, confirming that you are ready to pair the

control.

On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing

button. The shade will jog.

Control is now saved to the shade.

If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control.

Press and hold the shade end cap until the shade jogs (a brief up and down movement).

The control and shade endcap will flash green with solid red, confirming that you are ready to pair the

control.

On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing

button. The shade will jog.

Control is now saved to the shade.

If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control.

Press and hold the shade end cap until the shade jogs (a brief up and down movement).

The control and shade endcap will flash green with solid red, confirming that you are ready to pair the

control.

On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing

button. The shade will jog.

Control is now saved to the shade.

If adding a new remote, follow these steps:

A. When the Virtual Cord™ is not present

Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red.

Confirming that you are ready to pair the control.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

B. Using the Virtual Cord™ Control, Copy and Paste

On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming

button until the shade jogs. The shade endcap will flash green, with solid red.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

If adding a new remote, follow these steps:

A. When the Virtual Cord™ is not present

Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red.

Confirming that you are ready to pair the control.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

B. Using the Virtual Cord™ Control, Copy and Paste

On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming

button until the shade jogs. The shade endcap will flash green, with solid red.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

If adding a new remote, follow these steps:

A. When the Virtual Cord™ is not present

Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red.

Confirming that you are ready to pair the control.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

B. Using the Virtual Cord™ Control, Copy and Paste

On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming

button until the shade jogs. The shade endcap will flash green, with solid red.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

If adjusting the upper or lower shade limits, follow these steps:

Bring the shade to the upper or lower limit by pressing Up or Down button.

Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and

down movement.)

The control and shade endcap will flash orange and green, confirming that you are in programming mode.

Adjust the shade using the Up or Down button to your desired new limit.

Press and hold the Stop/Intermediate button on the control, until the shade jogs.

The new limit is saved to the shade and programming is complete. The shade endcap light no longer

flahses.

If adjusting the upper or lower shade limits, follow these steps:

Bring the shade to the upper or lower limit by pressing Up or Down button.

Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and

down movement.)

The control and shade endcap will flash orange and green, confirming that you are in programming mode.

Adjust the shade using the Up or Down button to your desired new limit.

Press and hold the Stop/Intermediate button on the control, until the shade jogs.

The new limit is saved to the shade and programming is complete. The shade endcap light no longer

flahses.

If adjusting the upper or lower shade limits, follow these steps:

Bring the shade to the upper or lower limit by pressing Up or Down button.

Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and

down movement.)

The control and shade endcap will flash orange and green, confirming that you are in programming mode.

Adjust the shade using the Up or Down button to your desired new limit.

Press and hold the Stop/Intermediate button on the control, until the shade jogs.

The new limit is saved to the shade and programming is complete. The shade endcap light no longer

flahses.

For Optional Single Channel Remote

For Optional Single Channel Remote • For Optional Single Channel Remote

Operating your shade, Single Channel Remote

Operando su persiana, Single Channel Remote

Fonctionnement du store, Single Channel Remote

Down

Light Indicator

Stop/Intermediate/Home Position

Stop/Intermediate/Home Position Program Button

Program Button

Program Buton

79056-00 (07/14)

Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com

NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement.

1. Adding

Deleting a Control, Single Channel Remote

If you need to remove a control from a shade, follow these steps:

Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap

will flash green and solid red, confirming that you are ready to unpair the control.

On the back of the Single Channel remote, use the paperclip or similar item, press and release the

programming button. The shade will jog.

The single channel remote is deleted, and will not operate the shade.

If you need to remove a control from a shade, follow these steps:

Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap

will flash green and solid red, confirming that you are ready to unpair the control.

On the back of the Single Channel remote, use the paperclip or similar item, press and release the

programming button. The shade will jog.

The single channel remote is deleted, and will not operate the shade.

If you need to remove a control from a shade, follow these steps:

Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap

will flash green and solid red, confirming that you are ready to unpair the control.

On the back of the Single Channel remote, use the paperclip or similar item, press and release the

programming button. The shade will jog.

The single channel remote is deleted, and will not operate the shade.

FCC STATEMENTS

This portable transmitter with its antenna complies with FCC/IC RF exposure

limits for general population / uncontrolled exposure.

Compliance Statement (Part 15.19)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Warning (Part 15.21)

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

INDUSTRY CANADA STATEMENTS

Section 7.1.3 of RSS-GEN

This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the

following two conditions: 1) this device may not cause interference, and 2) this device must accept any

interference, including interference that may cause undesired operation of the device.

Section 7.1.2 of RSS-GEN

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type

and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

DÉCLARATIONS D’INDUSTRIE CANADA

Section 7.1.3 DE RSS-GEN

Cet appareil se conforme à la (aux) norme(s) RSS exempte(s) de licence d’Industrie Canada. Son

fonctionnement est soumis aux deux conditions suivantes : 1) cet appareil ne doit pas causer de

l’interférence, et 2) cet appareil doit accepter toute interférence, y compris l’interférence qui peut causer un

fonctionnement indésirable de l’appareil.

Section 7.1.2 DE RSS-GEN

En vertu des règlements d’Industrie Canada, cet émetteur radio ne peut fonctionner qu’en utilisant une

antenne d’un type et d’une amplification maximale (ou inférieure) approuvés pour l’émetteur par Industrie

Canada. Pour réduire l’interférence radio potentielle aux autres utilisateurs, le type d’antenne et son

amplification doivent être choisis de manière à ce que la puissance isotrope rayonnée équivalente (pire) ne

soit pas supérieure à ce qui est nécessaire pour une communication réussie.

Customers located in the USA and Canada

contact our Customer Service Center at

1-800-221-6352

Springs Window Fashions LLC

P.O. Box 500, 8467 Route 405 South

Montgomery, PA 177521

Clientes de México: llamar al 01-800-909-0793

para obtener instrucciones sobre el lugar al que

deben enviar el producto para su reparación.

Importador en México:

Springs Window Fashions Sales Company de

México, S. de R.L. de C.V.

Carretera Federal Reynosa a Matamoros Sin

Número Edif 10A

Prologis Park, Ciudad Reynosa, Tamaulipas CP

88780

TEL. (899) 954-0361

FCC Interference Statement (Part 15.105 (b)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC STATEMENTS

This portable transmitter with its antenna complies with FCC/IC RF exposure

limits for general population / uncontrolled exposure.

Compliance Statement (Part 15.19)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Warning (Part 15.21)

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC Interference Statement (Part 15.105 (b)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

79056-00 (07/14)

Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com

1. Adding

Changing Motor Direction

If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the

motor direction needs to be modified. Follow these steps to reverse direction:

Bring shade to the approximate half way point (shade should be moved away from upper and lower limit).

Using the control, press and hold the Up and Down buttons at the same time until the shade jogs.

If using the Virtual Cord™, press and release the shade end cap. The shade will jog.

If using the Single Channel Remote, press and hold the button until the shade jogs.

Motor direction is reversed, Press Up or Down button to confirm correct direction.