Somfy Systems VC SWF Virtual Cord Remote Conrol VC-01 User Manual
Somfy Systems SWF Virtual Cord Remote Conrol VC-01 Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2364277 |
| Application ID | fI71ZvVmuJvK73LDShYZWQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 284.45kB (3555679 bits) |
| Date Submitted | 2014-08-20 00:00:00 |
| Date Available | 2014-08-20 00:00:00 |
| Creation Date | 2014-07-07 12:49:57 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2014-07-07 12:50:16 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CC (Macintosh) |
Thank you for purchasing this fine window treatment proudly constructed by us. Your shade has been custom-sized to your personal specifications with the highest standards of quality and craftsmanship. We have confidence that it will provide you with many years of beauty and easy maintenance. Enjoy! Follow the easy step-by-step instructions to install your shade. Should you need additional support, please feel free to call our Customer Service Center at 1-800-221-6352 or email us at windowfashions@springswindowfashions.com. We will be glad to help you. Again, we appreciate that you have chosen us to enhance the design and look of your home. Gracias por adquirir este fino tratamiento de ventana orgullosamente fabricado para usted. Su persiana ha sido hecha a la medida del cliente según sus especificaciones personales con los más altos estándares de calidad y trabajo artesanal. Nosotros tenemos la confianza que le proveerá muchos años de belleza y fácil mantenimiento. ¡Disfrútela! Siga las fáciles instrucciones “paso a paso"para instalar su persiana. Si necesita ayuda adicional, favor de proceder con toda libertad llamando al Centro de Servicio al Cliente al teléfono 1-800-221-6352 o enviando un correo electrónico a windowfashions@springswindowfashions.com. Estaremos muy dispuestos para ayudarle. Nuevamente, nosotros apreciamos que nos haya escogido para mejorar el diseño y la apariencia de su hogar. Merci d’avoir acheté ce superbe traitement de fenêtre que nous sommes fiers d’avoir exécuté pour vous. Votre store a été fait sur mesure selon votre propre cahier des charges dans un souci d’excellence et de la plus haute technicité. Nous ne doutons pas qu’il vous offrira des années de beauté et d’entretien facile Profitez-en bien ! Pour installer votre store, veuillez suivre les instructions détaillées. Si vous avez des questions n’hésitez pas à prendre contact avec notre Centre de service après-vente en téléphonant au 1-800-221-6352 ou par courrier électronique au windowfashions@springswindowfashions.com. Nous vous aiderons avec plaisir. Encore une fois, nous vous remercions de nous avoir choisi pour améliorer et embellir votre intérieur. HOW TO INSTALL CÓMO INSTALAR COMMENT INSTALLER Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade. Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade. Inside-/ceiling- or outside-mount motorized Cellular, Pleated, or Classic Roman Shade. Inside/ceiling mount Montaje de techo/interior Pose intérieure/au plafond Outside mount Montaje exterior Pose extérieure Optional extension bracket Soporte de extensión opcional Rallonge (en option) 1/4" 6,4 mm 1/4" to front of bracket for flush mount IllustRatIOns_Motorized shade install guide 6,4 mm mOtORIzatIOn desde el frente del soporte para un montaje a ras 6,4 mm jusqu’à l’avant du support pour montage encastré If using optional Battery Hanger, skip ahead to step 8 If using optional Battery Hanger, skip ahead to step 8 If using optional Battery Hanger, skip ahead to step 8 If mounting the battery case, mark battery screw locations If mounting the battery case, mark battery screw locations If mounting the battery case, mark battery screw locations Inside/ceiling mount Montaje de techo/interior • Pose intérieure/au plafond mOtORIzatIOn IllustRatIOns_Motorized shade install guide Outside mount Montaje exterior • Pose extérieure Single cell Celda sencilla Cellulaire simple 1 Shade 2 Brackets/Screws 3 Optional Extension Brackets 4 Reloadable battery case (optional) 5 Battery hanger/Screws 6 Plug-in Transformer (optional) 7 8 AA Batteries (optional) Double cell Celda doble Cellulaire double AA8 AA AA AA AA AA AA AA AA 1 Shade 2 Brackets/Screws 3 Optional Extension Brackets 4 Reloadable battery case (optional) 5 Battery hanger/Screws 6 Plug-in Transformer (optional) 7 8 AA Batteries (optional) On right end of window, hold battery case 1" behind and 2" to the left of the rear bracket screw location and mark. For a second reloadable battery case, mount the second setinside 5" tomount the left of the first base and mark. On right end of window, hold battery case 1/4" above and to 2" the left of the left bracket screw location and mark. For a second battery case, position base 5" tot he left of outside the first base and mark screw locations. mount On right end of window, hold battery case 1” behind and 2” to the left of the rear bracket screw location and mark. Draft-Image Review Only For a second reloadable battery case, mount the second set 5” to the left of the first base and mark. On right end of window, hold battery case 1/4” above and to 2” the left of the left bracket screw location and mark. 141209 (6-1814) For a second battery case, position base 5” tot he left of the first base and mark screw locations. On right end of window, hold battery case 1” behind and 2” to the left of the rear bracket screw location and mark. For a second reloadable battery case, mount the second set 5” to the left of the first base and mark. On right end of window, hold battery case 1/4” above and to 2” the left of the left bracket screw location and mark. For a second battery case, position base 5” tot he left of the first base and mark screw locations. Bracket chart (items 3, 4, 8 & 10) Tabla de soportes Tableau des supports Ordered width Ancho ordenado Largeur commandée outside mount Everything needed to install your shade Todo lo necesario para instalar su persiana. Tout le nécessaire pour installer votre store 1 Shade 2 Brackets/Screws 3 Optional Extension Brackets 4 Reloadable battery case (optional) 5 Battery hanger/Screws 6 Plug-in Transformer (optional) 7 8 AA Batteries (optional) Mark screw locations; center additional brackets, if applicable Marque la ubicación de los tornillos; centre los soportes adicionales, si es aplicable Marquer l’emplacement des vis; centrer les supports supplémentaires, le cas échéant Pleated Plisada Plissé Bracket quantity Cantidad de soportes Quantité de boîtier Up to 42" • hasta 106,7 cm • jusqu’à 106,7 cm 421⁄16" to 72" • 106,8 cm hasta 182,9 cm • 106,8 cm jusqu’à 182,9 cm 721⁄16" to 102" • 183 cm hasta 259,1 cm • 183 cm jusqu’à 259,1 cm 1021⁄16” to 132” • 259,2 cm hasta 335,3 cm • 259,2 cm jusqu’à 335,3 cm 1321⁄16” to 144” • 335,4 cm hasta 365,9 cm • 335,4 cm jusqu’à 365,9 cm Inside/ceiling mount Montaje de techo/interior • Pose intérieure/au plafond Shades over 3,600 in2 (4,200 Roman) will have 2 battery cases • Shades over 3,600 in2 (4,200 Roman) will have 2 battery cases • Shades over 3,600 in2 (4,200 Roman) will have 2 battery cases Drill holes, screw brackets into place, and battery case if applicable. Drill holes, screw brackets into place, and battery case if applicable. Drill holes, screw brackets into place,inside andmount battery case if applicable. Outside mount Montaje exterior • Pose extérieure Draft-Image Review Only Looped Lazada En boucle Tools needed • Herramientas necesarias • Outillage nécessaire 1/16" drill bit Broca de 1,6 mm Mèche de 1,6 mm Optional extension bracket Soporte de extensión opcional • Rallonge (en option) Determine inside/ceiling or outside mount Determine el montaje interior/de techo o exterior Choisir la pose intérieure/au plafond ou extérieure Place shade in desired location, mark corners Coloque la persiana en la ubicación deseada, marque las esquinas Placer le store dans l’emplacement souhaité, marquer les coins Inside/ceiling mount Montaje de techo/interior • Pose intérieure/au plafond Outside mount Montaje exterior • Pose extérieure Optional extension bracket: assemble brackets Soporte de extensión opcional: ensamble los soportes • Support de projection en option : assembler les supports Attach headrail brackets to extension brackets using screws and nuts. Conecte los soportes del cabezal con los soportes de extensión utilizando tornillosy tuercas. Fixer les supports de boîtier aux rallonges à l’aide des vis et des écrous. Measure in from both ends and mark Mida desde los dos extremos y marque Mesurer à partir de chacune des extrémités et marquer Inside/ceiling mount Montaje de techo/interior • Pose intérieure/au plafond 6" 15,2 cm Outside mount Montaje exterior • Pose extérieure 6" 15,2 cm Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com 79056-00 (07/14) AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 10 AA Mount shade, Battery Case and connect power cable. Mount shade, Battery Case and connect power cable. Mount shade, Battery Case and connect power cable. AA AA AA AA ALK TT TTTT TTTT PPPPPPPP PPPPPPPP PPPPPPPP PPPPPPPP PPPPPPPP PPPPP PPPPPPPP PPPPP PPPPPPPP PPPPPPPP slots SNAP PPPPPPPPPPPPPPPPP slots PPPPPPPP PPPPP slots 3 3 4 4 AA AA AA 5 5 AA AA PPPPP 1 Sh 2 T nalb 6optio 3 TT 4 TT PPPPPPPP PPPPPPPP 5 TTT PPPPPPPPP nalb PPPPPPPPP PPPPPPPP 6 TTT PPPPP 6optio slots PPPPPPPPP 7 T AA PPPPPPPP slots ade AA Connect battery Cable Conecte los alambres de la batería • Connecter AA8les files de la pile AA Reattach the Battery Case lid to the Battery Case base by aligning the pegs with the slots. Reattach the Battery Case lid toBthe Battery Case base by aligning the TTTT pegs with the slots. TTTT Reattach the Battery Case lid to the Battery CasePPPPPP base by aligning the2 PPPPPPPP pegs with the slots. PPPPPPPP Optional extension bracket Soporte de extensión opcional Rallonge (en option) PPPPPPPPPPPPPPPPP TT PPPPPPPPP Outside mount Montaje exterior Pose extérieure BA ALI TT NE ER IE AL TTTTTTT mount Montaje de techo/interior Pose intérieure/au plafond TTTT TTTT TTTT TTTT TTTT TTTT AA AA AA TT AA AA PPPPPPPPPPPPPPPPP TT AA 2 2 BAKALI TT NE ER IES AA8 TTTTTTT PPPPPPPPPPPPPPPPP TT TT PPPPPPPPPPPPPPPPP Inside/ceiling AA8 AA AA AA AA 1 Shade 2 T 3 TT 4 TT 5 PPPPPPPP TTT6optionalb 6 PPPPP TTT 7 T6optionalb AA Remove battery case lid, insert batteries into lid TT TT Remove battery case lid, insert batteries into lid TT Remove battery case lid, insert batteries into lid AA PPPPPPPP PPPPPPPP TT TTT6optionalb TTTTTTT TTT TTTTTTT TT TT T6optionalb TTTT TT TTTTTTT TT PPPPPP TT TT TTTT AA 2 T 1 Shade 7 T6optionalb PPPPPPPPPPPPPPPPP 3 TT Operating your shade, Vitrual Cord™ Operando su persiana, Vitrual Cord™ Fonctionnement du store, Vitrual Cord™ TT Up Up TTTTTTT Light Indicator SNAP Up SNAP Light Indicator SNAP Light Indicator TT 95 PPPPPPPPP Optional Battery Hanger Optional Battery Hanger Optional Battery Hanger PPPPPPPPP TT TTTT TTTT NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. SNAP NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. PPPPPPPPPPPPPPPPP NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. SNAP 1. Adding 1. Adding 1. Adding Adjusting the upper or lower limits of your shade, Vitrual Cord™ Adjusting the upper or lower limits of your shade, Vitrual Cord™ Adjusting the upper or lower limits of your shade, Vitrual Cord™ Attach the battery pack hanger to the assembled battery case. Attach the battery pack hanger to the assembled battery case. Attach the battery packCCCCCCCCC hanger to the assembled battery case. CCCCC CCCCCCCCC CCCCC B Program Button Program Button Program Button Down Down Down PPPPPPPP PPPPP Shade Endcap/ Push Button Control Shade Endcap/ Push Button Control Shade Endcap/ Push Button Control PPPPPPPP PPPPPPPP CCCCCC slots 38 CCCCCC CCCCCC If adjusting the upper or lower shade limits, follow these steps: CCCCCC Bring the shade to the upper or lower limit by pressing Up or Down button. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and down movement). The control and shade endcap will flash orange and then green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and release the shade endcap, the shade will jog. Tilt the headrail bracket tthough the slot in the battery hanger and press until snug. Tilt the headrail bracket tthough the slot in the battery hanger and press until snug. CCCCCCCCCCC Tilt the headrail bracket tthough the slot in the battery hanger and press until snug. shade 7A CCCCCCCCCCC shade SNAP SNAP SNAP The new limit is saved to the shade and programming is complete. The shade endcap light no longer PPPPPPPPP flashes. If adjusting the upper or lower shade limits, follow these steps: Bring the shade to the upper or lower limit by pressing Up or Down button. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and down movement). The control and shade endcap will flash orange and then green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and release the shade endcap, the shade will jog. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flashes. Attach bracket with Battery Case to shade. Attach bracket with Battery Case to shade. Attach bracket with Battery Case to shade. If adjusting the upper or lower shade limits, follow these steps: Bring the shade to the upper or lower limit by pressing Up or Down button. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs (a brief up and down movement). The control and shade endcap will flash orange and then green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and release the shade endcap, the shade will jog. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flashes. Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com 79056-00 (07/14) 1. Adding 1. Adding 1. Adding 1. Adding 1. Adding 1. Adding Adding a control, Virtual Cord™ Adding a control, Virtual Cord™ Adding a control, Virtual Cord™ Setting an Intermediate (Home) Position, Single Channel Remote Setting an Intermediate (Home) Position, Single Channel Remote Setting an Intermediate (Home) Position, Single Channel Remote If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control. Setting - Press and hold the shade end cap until the shade jogs (a brief up and down movement). Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button, the shade will jog. The position is saved to the shade, repeat to set a new home position. The control and shade endcap will flash green with solid red, confirming that you are ready to pair the control. On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing button. The shade will jog. Control is now saved to the shade. If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control. Press and hold the shade end cap until the shade jogs (a brief up and down movement). The control and shade endcap will flash green with solid red, confirming that you are ready to pair the control. On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing button. The shade will jog. Control is now saved to the shade. Using Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is actively moving, the Stop/Intermediate button would need to be pressed twice. Setting Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button, the shade will jog. The position is saved to the shade, repeat to set a new home position. Using Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is actively moving, the Stop/Intermediate button would need to be pressed twice. If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control. Press and hold the shade end cap until the shade jogs (a brief up and down movement). Setting - The control and shade endcap will flash green with solid red, confirming that you are ready to pair the control. Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button, the shade will jog. The position is saved to the shade, repeat to set a new home position. On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing button. The shade will jog. Control is now saved to the shade. For Optional Single Channel Remote For Optional Single Channel Remote • For Optional Single Channel Remote Operating your shade, Single Channel Remote Operando su persiana, Single Channel Remote Fonctionnement du store, Single Channel Remote Up Up Up Stop/Intermediate/Home Position Stop/Intermediate/Home Position Stop/Intermediate/Home Position Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is actively moving, the Stop/Intermediate button would need to be pressed twice. 1. Adding 1. Adding 1. Adding Light Indicator Light Indicator Light Indicator Down Down Down Using - Adding a Control, Single Control Remote Adding a Control, Single Control Remote Adding a Control, Single Control Remote If adding a new remote, follow these steps: A. When the Virtual Cord™ is not present Program Button Program Button Program Buton Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red. Confirming that you are ready to pair the control. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. B. Using the Virtual Cord™ Control, Copy and Paste NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming button until the shade jogs. The shade endcap will flash green, with solid red. NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement. 1. Adding 1. Adding 1. Adding Adjusting the Upper or Lower Limit of your shade, Single Channel Remote Adjusting the Upper or Lower Limit of your shade, Single Channel Remote Adjusting the Upper or Lower Limit of your shade, Single Channel Remote On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. If adjusting the upper or lower shade limits, follow these steps: If adding a new remote, follow these steps: Bring the shade to the upper or lower limit by pressing Up or Down button. A. When the Virtual Cord™ is not present Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and down movement.) Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red. Confirming that you are ready to pair the control. The control and shade endcap will flash orange and green, confirming that you are in programming mode. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. Adjust the shade using the Up or Down button to your desired new limit. Press and hold the Stop/Intermediate button on the control, until the shade jogs. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flahses. The control is now saved to the shade. B. Using the Virtual Cord™ Control, Copy and Paste On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming button until the shade jogs. The shade endcap will flash green, with solid red. If adjusting the upper or lower shade limits, follow these steps: On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. Bring the shade to the upper or lower limit by pressing Up or Down button. The control is now saved to the shade. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and down movement.) The control and shade endcap will flash orange and green, confirming that you are in programming mode. Adjust the shade using the Up or Down button to your desired new limit. Press and hold the Stop/Intermediate button on the control, until the shade jogs. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flahses. If adding a new remote, follow these steps: A. When the Virtual Cord™ is not present Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red. Confirming that you are ready to pair the control. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. The control is now saved to the shade. If adjusting the upper or lower shade limits, follow these steps: B. Using the Virtual Cord™ Control, Copy and Paste Bring the shade to the upper or lower limit by pressing Up or Down button. On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming button until the shade jogs. The shade endcap will flash green, with solid red. Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and down movement.) The control and shade endcap will flash orange and green, confirming that you are in programming mode. On the back of the Single Channel remote, use a paperclip or similar item, press and release the programming button. The shade will jog. Adjust the shade using the Up or Down button to your desired new limit. The control is now saved to the shade. Press and hold the Stop/Intermediate button on the control, until the shade jogs. The new limit is saved to the shade and programming is complete. The shade endcap light no longer flahses. Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com 79056-00 (07/14) FCC Interference Statement (Part 15.105 (b) 1. Adding 1. Adding 1. Adding Deleting a Control, Single Channel Remote Deleting a Control, Single Channel Remote Deleting a Control, Single Channel Remote If you need to remove a control from a shade, follow these steps: Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap will flash green and solid red, confirming that you are ready to unpair the control. On the back of the Single Channel remote, use the paperclip or similar item, press and release the programming button. The shade will jog. The single channel remote is deleted, and will not operate the shade. If you need to remove a control from a shade, follow these steps: Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap will flash green and solid red, confirming that you are ready to unpair the control. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. On the back of the Single Channel remote, use the paperclip or similar item, press and release the programming button. The shade will jog. FCC STATEMENTS The single channel remote is deleted, and will not operate the shade. This portable transmitter with its antenna complies with FCC/IC RF exposure limits for general population / uncontrolled exposure. If you need to remove a control from a shade, follow these steps: Press and hold the shade endcap until the shade jogs (a brief up and down movement). The shade endcap will flash green and solid red, confirming that you are ready to unpair the control. Compliance Statement (Part 15.19) On the back of the Single Channel remote, use the paperclip or similar item, press and release the programming button. The shade will jog. 1. The single channel remote is deleted, and will not operate the shade. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning (Part 15.21) 1. Adding 1. Adding 1. Adding Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Changing Motor Direction Changing Motor Direction Changing Motor Direction If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the motor direction needs to be modified. Follow these steps to reverse direction: Bring shade to the approximate half way point (shade should be moved away from upper and lower limit). Using the control, press and hold the Up and Down buttons at the same time until the shade jogs. If using the Virtual Cord™, press and release the shade end cap. The shade will jog. If using the Single Channel Remote, press and hold the button until the shade jogs. Motor direction is reversed, Press Up or Down button to confirm correct direction. FCC Interference Statement (Part 15.105 (b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the motor direction needs to be modified. Follow these steps to reverse direction: - Reorient or relocate the receiving antenna. Bring shade to the approximate half way point (shade should be moved away from upper and lower limit). - Connect the equipment into an outlet on a circuit different from that Using the control, press and hold the Up and Down buttons at the same time until the shade jogs. to which the receiver is connected. If using the Virtual Cord™, press and release the shade end cap. The shade will jog. - Consult the dealer or an experienced radio/TV technician for help. If using the Single Channel Remote, press and hold the - Increase the separation between the equipment and receiver. button until the shade jogs. Motor direction is reversed, Press Up or Down button to confirm correct direction. INDUSTRY CANADA STATEMENTS If shade raises when the down button is pressed, or if shade lowers when the up button is pressed, the motor direction needs to be modified. Follow these steps to reverse direction: Section 7.1.3 of RSS-GEN Bring shade to the approximate half way point (shade should be moved away from upper and lower limit). Using the control, press and hold the Up and Down buttons at the same time until the shade jogs. If using the Virtual Cord™, press and release the shade end cap. The shade will jog. If using the Single Channel Remote, press and hold the button until the shade jogs. Motor direction is reversed, Press Up or Down button to confirm correct direction. FCC STATEMENTS This portable transmitter with its antenna complies with FCC/IC RF exposure This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Section 7.1.2 of RSS-GEN Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. DÉCLARATIONS D’INDUSTRIE CANADA limits for general population / uncontrolled exposure. Compliance Statement (Part 15.19) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Section 7.1.3 DE RSS-GEN Cet appareil se conforme à la (aux) norme(s) RSS exempte(s) de licence d’Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : 1) cet appareil ne doit pas causer de l’interférence, et 2) cet appareil doit accepter toute interférence, y compris l’interférence qui peut causer un fonctionnement indésirable de l’appareil. Section 7.1.2 DE RSS-GEN Warning (Part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. En vertu des règlements d’Industrie Canada, cet émetteur radio ne peut fonctionner qu’en utilisant une antenne d’un type et d’une amplification maximale (ou inférieure) approuvés pour l’émetteur par Industrie Canada. Pour réduire l’interférence radio potentielle aux autres utilisateurs, le type d’antenne et son amplification doivent être choisis de manière à ce que la puissance isotrope rayonnée équivalente (pire) ne soit pas supérieure à ce qui est nécessaire pour une communication réussie. Customers located in the USA and Canada contact our Customer Service Center at 1-800-221-6352 Springs Window Fashions LLC P.O. Box 500, 8467 Route 405 South Montgomery, PA 177521 Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com Clientes de México: llamar al 01-800-909-0793 para obtener instrucciones sobre el lugar al que deben enviar el producto para su reparación. Importador en México: Springs Window Fashions Sales Company de México, S. de R.L. de C.V. Carretera Federal Reynosa a Matamoros Sin Número Edif 10A Prologis Park, Ciudad Reynosa, Tamaulipas CP 88780 TEL. (899) 954-0361 79056-00 (07/14)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.5-c021 79.154911, 2013/10/29-11:47:16 Instance ID : uuid:2e368821-7a50-5240-93f6-41bc3944fea5 Original Document ID : adobe:docid:indd:bf926ad5-ae98-11de-8ffb-dd17de6b5ae9 Document ID : xmp.id:9f8b743d-4c1f-4e42-83b7-ff96aeb4431b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:4246bc27-0774-44fd-9af4-9fd0f8b638e3 Derived From Document ID : xmp.did:05801174072068118C14A7236115F58C Derived From Original Document ID: adobe:docid:indd:bf926ad5-ae98-11de-8ffb-dd17de6b5ae9 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC (Macintosh) History Changed : / History When : 2014:07:07 12:49:57-05:00 Create Date : 2014:07:07 12:49:57-05:00 Modify Date : 2014:07:07 12:50:16-05:00 Metadata Date : 2014:07:07 12:50:16-05:00 Creator Tool : Adobe InDesign CC (Macintosh) Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CC (Macintosh)EXIF Metadata provided by EXIF.tools