Sony Group CXN5100 TransferJet Module User Manual 120110 CXN5100 Module Installation Manual FCC

Sony Corporation TransferJet Module 120110 CXN5100 Module Installation Manual FCC

(Short-Term Confidential) Installation Manual_REV2

2012/01/10SonyPDSG/Semiconductor Biz.Analog LSI Business Div./CLP Dep.CXN5100 Module Installation Manual
EX.)The Image for installation of CXN5100 ModuleCXN5100 moduleCoupler(antenna)cableOnly the coupler (LDA5M4G4815L-301 or LDA5M4G4820L-302) which received approval with CXN5100 can be used. By using another coupler mentioned above, additional measurement with the coupler and application to FCC will be needed based on ”Permissive Change Policies”.The product which equips CXN5100 should provide :- stable power supply of DC3.3V and 1.8V to CXN5100- the SDIO interface (version 2.00) to CXN5100
FCC Contains Transmitter Module FCC ID:AK8CXN5100 orContains FCC ID:AK8CXN5100The following sentences are added to the label and of end product.
This device complies with Part 15 of FCC Rules . Operation is subject to thefollowing two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.If there is any other required sentences to the end product from FCC, It should be added to the user manual.The following sentences are added to the user manual of end product.FCC Contains Transmitter Module FCC ID:AK8CXN5100 orContains FCC ID:AK8CXN5100FCC WARNINGChanges or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.

Navigation menu