Sony Group DRCBT1 Bluetooth Earset Adapter User Manual GB1U p65

Download:
Mirror Download [FCC.gov]
Document ID	462939
Application ID	I/HiDnVyBEX7i9qNIwli6w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.23kB (577819 bits)
Date Submitted	2004-08-25 00:00:00
Date Available	2004-08-25 00:00:00
Creation Date	2004-08-09 07:29:50
Producing Software	Acrobat Distiller 5.0.5 for Macintosh
Document Lastmod	2004-08-23 18:04:17
Document Title	GB1U.p65
Document Creator	PageMaker 6.5
Document Author:	Y3_Aikawa

2-186-671-11(1)
N Getting started
Charging the units
Unpacking
The Bluetooth earset contains a rechargeable LithiumIon battery and the Bluetooth earset adaptor contains a
Nickel-Metal Hydride battery, which should be charged
before using for the first time.
Check that you have the following items:
Bluetooth® Earset
System
Operating Instructions
Manual de instrucciones
• Bluetooth earset (1)
Dock the Bluetooth earset with the
Bluetooth earset adaptor.
Connect the supplied AC power
adaptor to DC IN 4.5 V jack on the
Bluetooth earset adaptor.
• Hanger (Size S) (1)
When the AC power adaptor connected to an AC
outlet, both units will turn off automatically.
• Bluetooth earset adaptor (1)
DR-BT1K
To an AC outlet
© 2004 Sony Corporation
Printed in Korea
• AC power adaptor (1)
AC power adaptor
(supplied)
For the customers in the USA
– Recycling of battery in Bluetooth earset
THIS PRODUCT IS MANUFACTURED UNDER
ONE OR MORE OF THE FOLLOWING SONY
U.S. PATENTS:
4,429,194; 4,736,435; 4,668,842; AND OTHER
PATENTS ISSUED OR PENDING IN U.S. AND
OTHER COUNTRIES
English
Owner’s Record
The model and serial number are located at the rear of
the Bluetooth earset and at the belt clip of the Bluetooth
earset adaptor.
Record these numbers in the spaces provided below.
Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. DR-BT1K
Bluetooth earset : DR-BT1
Bluetooth earset adaptor : DRC-BT1
Serial No.
Bluetooth earset: -----------------------Bluetooth earset adaptor: ------------------
WARNING
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are
recyclable. You can help
preserve our environment by
returning your used
rechargeable batteries to the
collection and recycling location
nearest you.
Caution:
Do not handle damaged or leaking Lithium-Ion
batteries.
–Recycling of battery in Bluetooth earset
adaptor
Charging is completed in about 2.5 hours* and the
indicator goes off.
Both indicators light
up green
• Warranty (1)
• Operating Instructions (1)
Identifying
RECYCLING NICKEL METAL HYDRIDE
BATTERIES
Nickel Metal Hydride batteries
are recyclable. You can help
preserve our environment by
returning your used
rechargeable batteries to the
collection and recycling location
nearest you.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
Caution:
Do not handle damaged or leaking Nickel Metal
Hydride batteries.
Polarity of the plug
1 Hanger
2 Multifunction button
Welcome!
Thank you for purchasing the Sony DR-BT1K
Bluetooth earset system. Before operating the unit,
please read this manual thoroughly and retain it for
future reference.
Some features are:
• Wireless system that allows you to talk by mobile
phone.
• Car Air-vent clip for car use.
• Fits on either your right or left ear.
• Convenient earset adaptor with belt clip
• Up to 5 hours for talking. Up to 100hours for standby.
• Flexible pipe microphone.
• Volume control function on the earset.
Indicates the status of the Bluetooth earset.
VOLUME +
VOLUME Pipe microphone
Housing
Contact terminal
Bluetooth earset adaptor
Charging and usage hours
Talk time
(up to)
Standby time
(up to)
Bluetooth
earset

7 hours
Bluetooth
earset adaptor

5 hours
160 hours
100 hours
1 LED indicator
Indicates the status of the Bluetooth earset adaptor.
Notes
• The communication with Bluetooth wireless
technology may be affected by the conditions below.
– Obstacles between the Bluetooth earset and the
Bluetooth earset adaptor or mobile phones with
Bluetooth wireless technology
: Body, metal, walls, etc.
– Electromagnetic waves
: A place where a wireless LAN is installed, a
microwave oven is used, or where electromagnetic
energy exists
• The above is also subject to the mobile phone’s
antenna and reception conditions.
Recommended accessory
Car Multi-Voltage DC Adaptor : DCC-E345
Buy Sony Accessories at URL :
http://www.sony.com/sonyaccessories
or call 1-888-559-7669 (SONY)
It is usage time from fully charged.
What's Bluetooth?
Bluetooth is a new technology that enables wireless data
communication by mobile phones, computers or other
mobile devices.
Bluetooth wireless technology operates within a range
of about 10 meters* (about 30 feet).
* Obstacles (body, metal, wall etc.) or reception
conditions may adversely affect the usable range.
Notes
• Charge in an environmental temperature of between
0˚C and 40˚C (between 32˚F and 104˚F).
• Avoid exposure to temperature extremes, direct
sunlight, moisture, sand, dust or mechanical shock.
Never leave in a car parked in the sun.
• Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.
Controls various functions of the Bluetooth earset.
This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by
SONY is under license.
Nokia is a registered trademark of Nokia Corporation.
3 LED indicator
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/ TV
technician for help.
This equipment complies with FCC radiation exposure
limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65. This equipment has very low
levels of RF energy that it is deemed to comply without
testing of specific absorption ratio (SAR).
Information
Note :
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
* Time required to fully charge empty battery.
Bluetooth earset
For more information regarding recycling of
rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
Make sure that the indicator lights up
green.
For more information regarding recycling of
rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
To DC IN 4.5 jack
• Car Air-vent clip (1)
Power on button
Pairing / Power off button
Contact pin
Belt clip
DC IN 4.5 V jack
Time stated above may vary, depending on the
temperature or conditions of use.
Note
Charge the built-in rechargeable battery or if the LED
indicator is still off after charging the built-in
rechargeable battery, take the Bluetooth earset and
Bluetooth earset adaptor to a Sony dealer for replacement of the rechargeable battery.
Pairing the units
To pair Bluetooth earset with Bluetooth earset
adaptor
The Bluetooth earset and Bluetooth earset adaptor come
already paired from factory. To pair the Bluetooth earset
and Bluetooth earset adaptor again after use, do the
following.
N Operating the system
Wearing the headset
Operating the units
General operation flow is described as follows:
Hook the Bluetooth earset around
your ear, as you would glasses.
To change into a standby mode
SCO LINK disconnects. The Bluetooth earset and
the Bluetooth earset adaptor return to the standby
mode.
To shut down the units
F To shut down the Bluetooth
Adjust the position of the Bluetooth
earset to fit comfortably.
earset
Hold down the POWER/TALK button
on the Bluetooth earset until LED
turned off.
This unit can be worn on the right or left ear by the
following procedure.
While the Bluetooth earset is turned
off, hold down the Maltifunction
button.
If your mobile phone equipped with voice-dial
function, you can dial by the pipe microphone.
Press the Multifunction button once.
Changing the direction of
the hanger
Take the calling, finish the talking or
dial by operating the mobile phone.
E To discommunicate of the units
Place the Bluetooth earset and the
Bluetooth earset adaptor close
together, as illustrated.
1m*
D To call
Holding the housing firmly, unlatch
the hanger assembly.
To shut down the units
The LED will blink in blue for the first 7 seconds
(approx.). Keep pressing until the LED blinks blue
and green.
G To shut down the Bluetooth
The mobile phone provided function may not
correspond. Refer to the manual supplied with your
mobile pone.
Press the Power on button on the
Bluetooth earset adaptor.
Holding the housing, rotate the
hanger, and then pull out in the
direction of the arrow.
To change into a standby
mode
A To prepare the Bluetooth earset
earset adaptor
Hold down the Pairing/Power off
button with the point of the plug or
similar instrument until LED turned
off.
Hold down the Multifunction button
on the Bluetooth earset about 7
seconds.
Hold down the Pairing / Power off
button with the point of the plug or
similar instrument (for about 3
seconds) until the LED lights up blue
and green.
When the LED blinks fast blue, release the button.
The LED becomes to blink slowly blue.
When the telephone is
received
Press your mobile phone buttons.
There is a mobile phone that can receive pressing
the POWER/TALK button.
Note
Take care that if the Maltifunction button hold down
about 10 seconds, the status goes pairing mode.
To adjust the volume
Press the VOLUME + or – while SCO Link.
After a few seconds, both units the blue/green
blinking will change to blink only blue, indicating
Standby mode.
Note
Time out for pairing mode is as follows:
The Bluetooth earset : about 60 seconds.
The Bluetooth earset adaptor : about 20 seconds.
B To prepare the Bluetooth earset
Tip
The unit comes with 2 hanger sizes to ensure a
comfortable fit.
See “To pair Bluetooth earset with Bluetooth
earset adaptor”.
VOLUME -
Search the Bluetooth earset by the
mobile phone.
Turn the hanger around as illustrated
below, and attach in the direction of
the arrow.
Connect the Bluetooth earset adaptor
to your mobile phone.
2.5 mm tripe
polarity jack
If the mobile phone detects the Bluetooth earset,
“DR-BT1” will appear in the display of the mobile
phone.
VOLUME +
Place the Bluetooth earset and the
mobile phone close together within
1 m.
Repeat above step 2.
Press the POWER ON button a few
seconds.
When the LED lights up blue and green, after the
LED becomes to blink slowly blue.
To pair Bluetooth earset with a mobile phone
for Bluetooth wireless technology
The Bluetooth earset can pair directly a mobile phone
with Bluetooth wireless technology. Do the following.
adaptor
The beep of current volume is heard every time by
pressing each button.
When the volume setting is maximum or minimum, the
beep does not sound for the exceeded operations.
How to use the car
attachment
The car attachment (supplied) can be used hold the
Bluetooth earset adaptor, by installing it in the vent of
the air conditioner of your car.
It is convenient for charging/using while driving.
Standard installation
Horizontal fin
Select “DR-BT1” in the list, then input
the passkey* (0000).
If there are not obstacles between the Bluetooth earset
and the Bluetooth earset adaptor, the communication
sensitivity goes up.
After a few seconds, the setting is completed.
* Passkey may also be called the following.
– Pass code, PIN code, PIN number, Password.
C To communicate of the units
Note
Refer to the manual supplied with your mobile phone.
9 mm (min)
17 mm (min)
3 mm (min)
7 mm (min)
(SCO LINK)
Press the Multifunction button.
Rotate the housing.
The Bluetooth earset and the Bluetooth earset
adaptor start communication (SCO LINK), so that
the sound from mobile phone is heard by the
Bluetooth earset.
And the voice talking by the pipe microphone is
transmitted to the mobile phone.
Vertical fin
3 mm (min)
7 mm (min)
9 mm (min)
Note
The housing and the hanger are marked left (L) and
right (R). For example, when using the left ear, the
housing is set in the L position, and the hanger is
attached with the L mark visible.
When the SCO LINK has been started, the LED on
Bluetooth earset adaptor lights up green, then that
blinks blue.
The LED on Bluetooth earset blinks 3 times blue.
17 mm (min)
To install the car
attachment
Attach the hook to the rear of the
attachment. Ensure it is the correct
way round. (See illustration)
N Additional information
Disposing of the
Bluetooth earset and
adaptor
For environmental conservation, be sure to remove the
built-in rechargeable battery from the units before you
dispose of them, and dispose of the battery appropriately.
In the case of the
Bluetooth earset
Attach the spacer under the hook
firmly after peeling off the doublefaced tape.
Remove the two screws from the rear.
Spacer
Push hard around the arrow as
illustrated to unlatch the unit
assembly.
Insert the hook in the vent of the air
conditioner. Confirm the hook is
firmly clipped to the fin.
Lift lightly by the pipe microphone.
Remove each XXX first, and then
remove the battery from the XXX.
Dock the Bluetooth earset adaptor’s
belt clip in the attachment.
Remove the connector.
In the case of the
Bluetooth earset adaptor
Remove the screw from the rear.
• You can adjust the inclination of the attachment by
sliding the rear of the car attachment.
Raise the cover by the belt clip.
Remove the connector.
Pull out the battery.
To remove the attachment
Push the car attachment back, and
push gently it off the fin.
Remove the attachment while
suppressing the fin.
Note
If the attachment is pulled out and catches the fin, it
may damage it.
Problem
Solution
No sound/
Turn on the transmitter first, then put
Muffled sound on the headphones.
Check the connection of the audio/
video equipment or the AC power
adaptor.
Check that the audio/video equipment
is turned on.
Turn up the volume on the connected
audio/video equipment, if the
transmitter is connected to the
headphones jack.
DR-BT1:
Change the radio frequency with the
CHANNEL selector on the transmitter,
then tune the headphones with the
TUNE control.
DR-BT1:
Change the radio frequency with the
CHANNEL selector on the transmitter,
then press the TUNE button again.
The mute function is activated.
Use the headphones near the transmitter.
The headphones’ POWER indicator
light is weak or turned off.
• Charge the supplied rechargeable
batteries or if the POWER indicator is
still off after charging the supplied
rechargeable batteries, take the
headphones to a Sony dealer for
replacement of the rechargeable
battery.
If you connect the transmitter to the
LINE OUT or REC OUT jacks of an
audio reproducer, make sure that the
NOISE FILTER switch is set to OFF.
Make sure that the NOISE FILTER
switch is set to either ON or OFF (If
the switch gets stuck between ON and
OFF, the sound will be cut off).
Precautions
• Do not leave the Bluetooth earset system in a location
subject to direct sunlight, heat or moisture.
• Consult local lows and regulations regarding use of
the Bluetooth earset while driving or cycling.
• Using the Bluetooth earset may not function
depending on radio wave conditions and location
where the equipment is being used.
• If you experience discomfort after wearing the earset,
take off the Bluetooth earset immediately.
• Start dialing after connecting the Bluetooth earset to
your mobile phone.
Notes on earset
Preventing hearing damage avoid using earset at high
volume. Hearing experts advise against continuous, loud
and extended play. If you experience a ringing in your
ears, reduce the volume or discontinue use.
Caring for others
Keep the volume at a moderate level. This will allow
you to hear outside sounds and to be considerate to the
people around you.
If you have any questions or problems concerning the
system that are not covered in this
manual, please consult the nearest Sony dealer.
Be sure to bring the Bluetooth earset and the Bluetooth
earset adaptor to the Sony dealer when requiring repair
work.
Specifications
DR-BT1
General
Bluetooth Compliance:
Bluetooth standard Ver. 1.1
Output power:
Bluetooth standard Power Class2
( 2.5mW )
Frequency band:
2.4GHz band ( 2.4000GHz 2.4835GHz )
Max. Communication range:
Line of sight approx. 10m
Supplied accessory:
AC adaptor (1), Hanger (S) (1),
Car Air-vent clip (1)
Bluetooth earset DR-BT1
Supported Bluetooth Profiles:
Headset Profile, Hands-free Profile
Power source:
DC 3.7V: Built-in Li-ion
rechargeable battery
Typical Talktime: 7 hours
Typical Standby Time:
160 hours
Mass:
Approx. 20g
Receiver
Type:
Driver unit:
Tips
• Use the other hook (L) if the air conditioner is sloped.
• Install the hook to face side ways if the fin of the air
conditioner is vertical.
Troubleshooting
Note
Be careful not to touch the circuit board attached to the
battery box. Hold the battery box (black plastic box)
when you remove them.
Open air, dynamic
13.5mm dome type (CCAW
Voice Coil)
Sensitivity:
104dB/mW
Impedance:
16Ω at 1kHz
Power handling capacity:
50mW(IEC)
Reproduction frequency range:
50-20,000Hz
Microphone
Type:
Flexible pipe microphone
Unit:
Electric condenser
Output impedance: Under 2.2kΩ
Open circuit voltage level:
-42dB(0dB = 1V/Pa)
Effective frequency range:
100 - 5,000Hz
Bluetooth earset adaptor DRC-BT1
Supported Bluetooth Profiles:
Headset Profile
Power source:
DC 1.2V: Built-in Ni-MH
rechargeable battery
Typical Talktime: 5 hours
Typical Standby Time:
100 hours
Cord:
0.20m (Max. stretch length 0.7m)
Plug:
2.5mm triple/four-pole plug
Mass:
Approx. 35g (without cord)
Design and specifications are subject to change without
notice.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:08:09 07:29:50Z
Modify Date                     : 2004:08:23 18:04:17+09:00
Page Count                      : 3
Creation Date                   : 2004:08:09 07:29:50Z
Mod Date                        : 2004:08:23 18:04:17+09:00
Producer                        : Acrobat Distiller 5.0.5 for Macintosh
Author                          : Y3_Aikawa
Metadata Date                   : 2004:08:23 18:04:17+09:00
Creator                         : Y3_Aikawa
Title                           : GB1U.p65
Has XFA                         : No

EXIF Metadata provided by EXIF.tools