Sony Group HCDBX5BT Compact Disc Receiver with Bluetooth User Manual 3 095 507 11 1 indb

Download:
Mirror Download [FCC.gov]
Document ID	749598
Application ID	JJ33JA0KXjSe2lsjBGg6Vg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.42kB (755251 bits)
Date Submitted	2007-01-23 00:00:00
Date Available	2007-04-06 00:00:00
Creation Date	2006-12-06 16:21:00
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-12-19 16:49:11
Document Title	3-095-507-11(1).indb
Document Creator	Adobe InDesign CS2 (4.0.4)
Document Author:	IMX

3-095-507-11(1)
Micro HI-FI
Component System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record these
numbers in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. ______________ Serial No. ______________
CMT-BX5BT
© 2007 Sony Corporation
CMT-BX5BT.GB.3-095-507-11(1)
WARNING
To reduce the risk of fire or
electric shock, do not expose
this apparatus to rain or
moisture.
CAUTION
The use of optical instruments with this
product will increase eye hazard.
Notice for the customers in the U.S.A
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Note to CATV system installer:
This reminder is provided to call the
CATV system installer’s attention to
Article 820-40 of the NEC that provides
guidelines for proper grounding and, in
particular, specifies that the cable ground
shall be connected to the grounding
system of the building, as close to the point
of cable entry as practical.
The following FCC statement applies
only to the version of this model
manufactured for sale in the U.S.A.
Other versions may not comply with
FCC technical regulations.
WARNING
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
 Reorient or relocate the receiving
antenna.
 Increase the separation between the
equipment and receiver.
 Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
 Consult the dealer or an experienced
radio/TV technician for help.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
This equipment must not be co-located or
operated in conjunction with any other
antenna or transmitter.
This eq
radiati
uncon
FCC r
Guidel
This eq
level th
FCC r
Guidel
withou
evalua
it shou
least 2
and pe
hands,
U.S.A
mode
Note
A Dua
which
one sid
the oth
materi
Comp
this pr
Music
prote
This pr
discs t
(CD) s
discs e
techno
compa
those d
confor
be play
2GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
pplies
el
S.A.
with
found
the
d to
es,
This equipment complies with FCC
radiation exposure limits set forth for
uncontrolled equipment and meets the
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65.
This equipment has a very low RF energy
level that is deemed to comply with
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65
without maximum permissive exposure
evaluation (MPE). But it is desirable that
it should be installed and operated with at
least 20cm and more between the radiator
and person’s body (excluding extremities:
hands, wrists, feet and legs).
 The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those
of their respective owners.
 MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and Thomson.
U.S.A., Canadian and Australian
models only
ere
ect
he
tlet
which
ed
or
d in
ty to
ed or
her
ENERGY STAR® is a U.S.
registered mark. As an
ENERGY STAR® partner,
Sony Corporation has
determined that this
product meets the ENERGY
STAR® guidelines for energy
efficiency.
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback on
this product is not guaranteed.
Music discs encoded with copyright
protection technologies
This product is designed to playback
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some record
companies. Please be aware that among
those discs, there are some that do not
conform to the CD standard and may not
be playable by this product.
3GB
CMT-BX5BT.GB.3-095-507-11(1)
Table of Contents
Guide to parts and controls ............. 5
Information on the display ............... 9
Getting Started
Hooking up the system
securely..................................................10
Setting the clock ................................11
Basic Operations
Playing a CD/MP3 disc .....................12
Listening to the radio .......................13
Using the Bluetooth function ........14
Using optional audio
components.........................................20
Adjusting the sound .........................20
Changing the display .......................21
Other Operations
Creating your own program
(Program Play) .....................................22
Presetting radio stations .................23
Using the Timers.................................24
4GB
CMT-BX5BT.GB.3-095-507-11(1)
Others
Troubleshooting .................................25
Messages...............................................28
Precautions...........................................29
Specifications ......................................31
Bluetooth wireless technology .....32
Playable Bluetooth devices ............34
This manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit (HCD-BX5BT/Compact Disc Receiver)
Front panel
Guide to parts and controls
Guide to parts and controls
Top panel
Continued
CMT-BX5BT.GB.3-095-507-11(1)

5GB
Remote (RM-SC31)

BLUETOOTH indicator (page 18,
19, 19)
Lights up when the Bluetooth function
is active.

BLUETOOTH OPR button (page
16, 18, 19, 19)
Press to make a connection,
disconnection, or pairing with a
Bluetooth device.
/ (power) button (page 11, 24,
27, 27)
Press to turn on the system.
Press t
TUNE
Press t
Press t
mode.
Remo
20)
Press t

FUNC
AUDIO IN jack (page 20)
Press t
Connect to an optional audio
component.


Press t
display
PHONES jack

Remo
 (pa
DISPL
Connect the headphones.


PLAY
butto
Playback buttons and function
buttons
Unit: BLUETOOTH  (play/
pause) button (page 15, 16, 16)
Press t
MP3 d
Press t
Press to select the Bluetooth function.
Press to start or pause playback of the
music on the Bluetooth device (Bluetooth
mobile phone, etc.).

Unit: CD  (play/pause)
button (page 12)
Press t
Remote sensor (page 25)

Press to select the CD function.
Press to start or pause playback of a disc.

STANDBY indicator (page 21, 25)
Lights up when the system is turned off.

 (open/close) button (page 12)
Press to open or close the disc tray.
Remote: CD button (page 12)
Press to select the CD function.
Soun
Unit:
Remo

Unit:
butto
Remo
12, 13
Press t
6GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
Remote:  (play) button,
 (pause) button
Press to start or pause playback.
ion
Press to select the TUNER function.
Press to select FM or AM reception
mode.
Remote: AUDIO IN button (page
20)
Press to select the AUDIO IN function.
FUNCTION button (page 18, 19)
Press to select the function.

DISPLAY button (page 16, 21)
Press to change the information on the
display.

on
y/
6)
on.
he
etooth
PLAY MODE/TUNING MODE
button (page 12, 13, 22, 23)
Press to select the play mode of a CD or
MP3 disc.
Press to select the tuning mode.

Sound buttons (page 20)
Unit: DSGX button
Remote: EQ button
Press to select the sound effect.

disc.
ENTER button (page 11, 22, 23,
24)
Press to enter the settings.
TUNER/BAND button (page 13)
ge

Unit: /CANCEL (stop/cancel)
button (page 12, 13, 15, 16, 18)
Remote:  (stop) button (page
12, 13, 15, 16, 18)

/ (go back/go forward)
button (page 12, 15, 16, 22)
Press to select a track or file.
Unit: TUNE +/ (tuning) button
(page 13)
Remote: +/ (tuning) button
(page 13, 23)
Guide to parts and controls
18,
Press to tune in the desired station.
+/ (select folder) button
(page 12, 15, 22)
Press to select a folder.
/ (rewind/fast forward)
button (page 12, 15, 16)
Press to find a point in a track or file.

Unit: VOL +/ button (page 12,
13, 16, 19, 20)
Remote: VOLUME +/ button
(page 12, 13, 16, 19, 20)
Press to adjust the volume.

CLOCK/TIMER SELECT button
(page 24)
CLOCK/TIMER SET button (page
11, 24)
Press to set the clock and the Play Timer.
Press to stop playback.
Continued
CMT-BX5BT.GB.3-095-507-11(1)

7GB

REPEAT/FM MODE button (page
12, 13)
Info
Press to listen to a disc, a single track or
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).

Battery compartment lid
(page 11)

CLEAR button (page 16, 18, 22)
Press to delete a pre-programmed track
or file.
Press to erase the pairing registration
information of the Bluetooth device.

TUNER MEMORY button (page
23)
Press to preset the radio station.

SLEEP button (page 24)
Press to set the Sleep Timer.

Funct

MP3
Lights

DSGX

Tune

Text i
8GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-


Function
Timer (page 24)


MP3
Play mode (page 12)
Lights up when an MP3 disc is loaded.

Guide to parts and controls
Information on the display

Tuner reception mode (page 13)
DSGX (page 20)


Play/Pause
Tuner reception (page 13)

Text information
9GB
CMT-BX5BT.GB.3-095-507-11(1)
 Po
Getting Started
Hooking up the system securely
Conne
If the p
detach
for mo
When
1 Rem
me
2 Pre
Left speaker
fun
3 Hol
DSG
on t
Right speaker
4 Afte
pow
To use
or
Wall socket
 Speaker cord (Red/)
 Speaker cord (Black/)
 AM loop antenna
 FM lead antenna (Extend it horizontally.)
 Connect white side.
Slide a
compa
suppli
first, m
below.
 Speakers
Insert only the stripped portion of the
speaker cords into the SPEAKER jacks.
 Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords and the power cord to avoid
picking up noise.
Notes
 With
abou
 Do n
mix d
 If you
of tim
from
10GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
 Power
When carrying this system
1 Remove a disc to protect the CD
Setting the clock
Use buttons on the remote to set the
clock.
Press /  to turn on the
system.
Press CLOCK/TIMER SET .
mechanism.
2 Press CD  to select the CD
If the current mode appears on
the display, press / 
repeatedly to select “CLOCK SET”
and then press ENTER .
function.
3 Hold down TUNER/BAND  and
DSGX  on the unit, and press  
on the unit until “STANDBY” appears.
4 After “LOCK” appears, unplug the
Press /  repeatedly
to set the hour, and then press
ENTER .
Use the same procedure to set
the minutes.
power cord.
To use the remote
Slide and remove the battery
compartment lid , and insert the two
supplied R6 (size AA) batteries,  side
first, matching the polarities shown
below.
Getting Started
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
The clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY . The clock is displayed
for about 8 seconds.
he
cks.
hat
et up
peaker
Notes
 With normal use, the batteries should last for
about six months.
 Do not mix an old battery with a new one or
mix different types of batteries.
 If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
11GB
CMT-BX5BT.GB.3-095-507-11(1)
Other operation
Basic Operations
Playing a CD/MP3 disc
1 Select the CD function.
Press CD .
Place a disc.
Press   on the unit, and place
a disc with the label side up on the
disc tray.
To close the disc tray, press   on
the unit again.
Do not force the disc tray closed with
your finger, as this may damage the
unit.
Start playback.
Press  (or CD  on the unit)
.
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
the unit) .
To
Press
Pause playback  (or CD  on the
unit) . To resume
play, press the button
again.
Stop playback  .
Select a folder
+/ .
on an MP3
disc
Select a track / .
or file
Find a point in Hold down /
a track or file  during playback, and
release the button at the
desired point.
Select Repeat REPEAT  repeatedly
until “REP” or “REP1”
Play
appears.
To change the play mode
Press PLAY MODE  repeatedly while
the player is stopped. You can select
normal play (“ *” for all MP3 files
in the folder on the disc), shuffle play
(“SHUF” or “
SHUF*”), or program
play (“PGM”).
* When playing a CD-DA disc,
(SHUF)
Play performs the same operation as normal
(shuffle) play.
Notes
 All tr
repea
 “REP
repea
Notes
 Do n
unne
files.
 Folde
 MP3
they
 The s
a file
 If the
“.MP
files,
malfu
 The m
 fol
M
M
co
 fol
is
 Com
softw
medi
MP3
audio
Notes
 If the
sessio
MP3
back.
 A dis
as a C
12GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
Notes on Repeat Play
the
on
edly
P1”
while
ay
ram
HUF)
normal
Notes on playing MP3 discs
 Do not save other types of files or
unnecessary folders on a disc that has MP3
files.
 Folders that have no MP3 files are skipped.
 MP3 files are played back in the order that
they are recorded onto the disc.
 The system can only play MP3 files that have
a file extension of “.MP3”.
 If there are files on the disc that have the
“.MP3” file extension, but that are not MP3
files, the unit may produce noise or may
malfunction.
 The maximum number of:
 folders is 255 (including the root folder).
 MP3 files is 511.
 MP3 files and folders that can be
contained on a single disc is 512.
 folder levels (the tree structure of files)
is 8.
 Compatibility with all MP3 encoding/writing
software, recording device, and recording
media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted
audio or may not play at all.
Notes on playing multisession discs
 If the disc begins with a CD-DA (or MP3)
session, it is recognized as a CD-DA (or
MP3) disc, and other sessions are not played
back.
 A disc with a mixed CD format is recognized
as a CD-DA (audio) disc.
Listening to the radio
1 Select “FM” or “AM.”
Press TUNER/BAND  repeatedly.
Select the tuning mode.
Tune in the desired station.
Press TUNING MODE  repeatedly
until “AUTO” appears.
Press +/ (or TUNE +/ on
the unit) . Scanning stops
automatically when a station is tuned
in, and then “TUNED” and “ST” (for
stereo programs only) appear.
Basic Operations

, and
t the
 All tracks or files on a disc are played
repeatedly up to five times.
 “REP1” indicates that a single track or file is
repeated until you stop it.
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
the unit) .
To stop automatic scanning
Press  .
To tune in a station with a weak signal
If “TUNED” does not appear and the
scanning does not stop, press TUNING
MODE  repeatedly until “AUTO” and
“PRESET” disappear, and then press
+/ (or TUNE +/ on the unit) 
repeatedly to tune in the desired station.
To reduce static noise on a weak FM
stereo station
Press FM MODE  repeatedly until
“MONO” appears to turn off stereo
reception.
13GB
CMT-BX5BT.GB.3-095-507-11(1)
Using the Bluetooth
function
This system supports Bluetooth A2DP
and AVRCP profiles. For details on
Bluetooth wireless technology, see
“Bluetooth wireless technology” (page
32).
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:

For customers in Canada:

For customers in Europe:

For customers in Latin America:

For customers in Asia and Oceania:

Listening to music of a
Bluetooth mobile phone or
Bluetooth device
You can listen to music from your
Bluetooth mobile phone or Bluetooth
device over a wireless connection.
Pairin
device
Pairin
device
before
to pair
device
perfor
perfor
compl
a Blue
Pla
co
1m
Se
Pre
the
Follow the procedure below to listen to
music from Bluetooth devices with this
system.
Pairing this system with a Bluetooth
device

Connecting to registered devices

Playing music of a Bluetooth device
For details about the operations of
the Bluetooth device, also refer to the
operation manual supplied with your
Bluetooth device.
Op
an
op
Fo
the
op
Blu
Wh
the
dev
Blu
on
Th
BX
Wh
thi
(A
dev
no
can
op
14GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
Pairing this system with a Bluetooth
device
th
oth
ce
he
ur
Place the Bluetooth device to be
connected to this system within
1 meter of the system.
Select the Bluetooth function.
Operate the Bluetooth device
and perform the pairing
operation.
Press BLUETOOTH   on
the unit.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
When searching for this system with
the Bluetooth device, a list of the
devices found may appear in the
Bluetooth device display depending
on the type of Bluetooth device.
This system appears as “CMTBX5BT.”
When establishing a connection with
this system, select the audio profile
(A2DP, AVRCP) at the Bluetooth
device. If the Bluetooth device does
not support the AVRCP profile, you
cannot perform playback or other
operations with the system (page 16).
Enter the passcode.
Passcode entry may be required
depending on the type of Bluetooth
device.
When “PIN” appears, enter the
passcode at the system as follows:
Press / and / on the
remote (or
+/ and /
 on the unit)  to enter the
same passcode that was entered at
the Bluetooth device, and then press
ENTER .
Once pairing is completed and the
connection is established, the system
display changes as follows:
“CONNECT”  Name of the
Bluetooth device
To cancel passcode entry partway
Press  .
Notes
 “Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
 This system only supports numerical
passcodes up to 4 digits.
 The pairing standby status of the system is
cancelled after about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
 While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Continued
CMT-BX5BT.GB.3-095-507-11(1)
Basic Operations
n to
this
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
device. Once a pairing operation is
performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music of
a Bluetooth device” (page 16).

15GB
To erase all the pairing registration
information
1 Press BLUETOOTH   on the
unit.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
and hold BLUETOOTH OPR  on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
2 Press CLEAR .
“DELETE?” appears.
3 Press ENTER .
“COMPLETE” appears and all the
pairing information is erased.
Note
In order to connect with a Bluetooth device
after performing this operation, you must enter
the passcode again.
Playing music of a Bluetooth device
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP. If the system is not
connected with a Bluetooth device using
AVRCP, “NOT IN USE” appears when
you operate the system.
Select the Bluetooth function.
Establish a connection from the
Bluetooth device.
Press BLUETOOTH   on
the unit.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
Once the connection is established,
the system display changes as follows:
“CONNECT”  Name of the
Bluetooth device
Start playback.
Press  (or BLUETOOTH  on
the unit) .
Depending on the Bluetooth device,
you may need to start up the AV
software of the Bluetooth device
beforehand.
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
the unit) .
To check the address of a connected
Bluetooth device
Notes
device
 If you
Bluet
opera
Bluet
 Depe
you c
of the
 When
is pre
headp
a con
anoth
Press DISPLAY  while the Bluetooth
device name appears in the system
display.
The Bluetooth device address appears for
8 seconds.
To cancel the connection with a
Bluetooth device
Press and hold BLUETOOTH OPR 
on the unit for about 2 seconds until
“DISCONNCT” appears, or until the
information on the display (device name,
etc.) disappears.
Other operation
To
Press
Pause playback  (or BLUETOOTH
 on the unit) .
Stop playback  .
Select a file
/ .
Find a point in Hold down /
.
a file
Note
These operations may not be available for
certain Bluetooth devices. In addition, the
actual operations may differ depending on the
connected Bluetooth device.
16GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
 on
vice,
ed
 If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
 Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
 When BLUETOOTH   on the unit
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
Listening to music on this
system using Bluetooth
headphones
You can listen to music played on this
system using your Bluetooth headphones
over a wireless connection.
oth
Basic Operations
/ on
Notes on connections with Bluetooth
devices
ars for

il
he
name,
Follow the procedure below to listen
to music on this system with Bluetooth
headphones.
Pairing this system with Bluetooth
headphones

Connecting to registered headphones

Playing music on this system
For details about the operations of the
Bluetooth headphones, also refer to the
operation manual supplied with your
Bluetooth headphones.
TH
.

he
on the
Continued
CMT-BX5BT.GB.3-095-507-11(1)

17GB
Pairing this system with Bluetooth
headphones
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
headphones. Once a pairing operation
is performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music on
this system” (page 19).
Select a function other than the
Bluetooth function.
Press FUNCTION  repeatedly.
Place the Bluetooth
headphones to be connected
to this system within 1 meter of
the system.
Put the Bluetooth headphones
in pairing mode.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
Press and hold BLUETOOTH
OPR  on the unit for about 7
seconds until the BLUETOOTH
indicator  flashes.
Sound output from the speakers is
stopped.
To cancel passcode entry partway
Playin
Press  .
You ca
Blueto
system
AVRC
Notes
 “Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
 This system only supports numerical
passcodes up to 4 digits.
 The pairing standby status of the system is
cancelled after about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
 While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Follow the same procedure as in
step 4 of “Pairing this system with a
Bluetooth device” (page 15).
Once pairing is completed and the
connection is established, the system
display changes as follows:
“CONNECT”  Name of the
Bluetooth device

un
lig
If m
tha
pre
att
3m
(C
to
rec
att
est
On
the
“C
Blu
unit.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
and hold BLUETOOTH OPR  on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
2 Press CLEAR .
“DELETE?” appears.
“COMPLETE” appears and all the
pairing information is erased.
To connect with Bluetooth headphones after
performing this operation, you must enter the
passcode again.
Es
Blu
Pre
1 Press BLUETOOTH   on the
3 Press ENTER .
Se
Blu
Pre
To erase all the pairing registration
information
Note
Enter the passcode.
Sta
th
De
hea
sys
etc
Fo
Blu
op
Blu
18GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
y
IN
c.
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
Press FUNCTION  repeatedly.
, this
ection
he
ith a
tooth
ress
on
ut the
de.
after
er the
Establish a connection with the
Bluetooth headphones.
Press and hold BLUETOOTH OPR
 on the unit for about 2 seconds
until the BLUETOOTH indicator 
lights up, then release the button.
If more than one Bluetooth device
that has been connected in the past is
present around the system, the system
attempts to connect with up to the
3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.
Once the connection is established,
the system display changes as follows:
“CONNECT”  Name of the
Bluetooth device
on
Select a function other than the
Bluetooth function.
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
the unit) .
To cancel the connection with
Bluetooth headphones
Press and hold BLUETOOTH OPR 
on the unit for about 2 seconds until the
BLUETOOTH indicator  turns off.
Notes
 If you cannot connect with paired Bluetooth
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
 When the system is changed to a function
other than the Bluetooth function and
BLUETOOTH OPR  on the unit is pressed
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
 This system stores separate volume settings
for when listening through the speakers or
PHONES jack , or when listening through
Bluetooth headpnoes.
Basic Operations
m is
ring is
m step
Playing music on this system
Start playback of the music for
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone’s controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
19GB
CMT-BX5BT.GB.3-095-507-11(1)
Using optional audio
components
1 Connect additional audio
component to the AUDIO
IN jack  on the unit using
an audio analog cord (not
supplied).
Turn down the volume.
Press VOLUME  (or VOL  on the
unit) .
Select the AUDIO IN function.
Press AUDIO IN .
Adjusting the sound
Cha
To add a sound effect
To
Chang
inform
the dis
Check
clock w
system
To
Generate a
more dynamic
sound
(Dynamic
Sound
Generator
X-tra)
Set the sound
effect
Press
DSGX  on the unit.
EQ  repeatedly
to select “BASS”
or “TREBLE,” and
then press +/ 
repeatedly to adjust the
level.
1)
2)
For e
infor
or fo
the t
stopp
Whe
conn
can v
The
light
Start playing the connected
component.
3)
Adjust the volume.
Notes
Press VOLUME +/ (or VOL +/ on
the unit) .
 Char
as “_
 The f
 to
de
 to
tim
 The f
 fo
eit
Jo
 The f
 ID
ID
(u
20GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
Changing the display
nit.
1)
t the
2)
3)
Press
DISPLAY  repeatedly
when the system is on.
DISPLAY  when
the system is off3). The
clock is displayed for 8
seconds.
For example, you can view CD/MP3 disc
information, such as the track or file number
or folder name during normal play, or
the total playing time while the player is
stopped.
When the system and a Bluetooth device are
connected using the Bluetooth function, you
can view the Bluetooth device address.
The STANDBY indicator  on the unit
lights up when the system is off.
Basic Operations
To
Change
information on
the display1)2)
Check the
clock when the
system is off
Notes on the display information
 Characters that cannot be displayed appear
as “_”.
 The following are not displayed:
 total playing time for a CD-DA disc
depending on the play mode.
 total playing time and remaining playing
time for an MP3 disc.
 The following are not displayed correctly:
 folder and file names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format.
 The following is displayed:
 ID3 tag information for MP3 files when
ID3 version 1 and version 2 tags are used
(up to 62 characters).
21GB
CMT-BX5BT.GB.3-095-507-11(1)
Other Operations
“ . ” appears when the total
program time exceeds 100 minutes
for a CD, or when you select a CD
track whose number is 21 or over, or
when you select an MP3 file.
Creating your own
program
(Program Play)
Press CD  to select the CD
function.
Press PLAY MODE  repeatedly
until “PGM” appears while the
system is stopped.
Press /  repeatedly
until the desired track or file
number appears.
When programming files, press
+/  repeatedly to select the
desired folder, and then select the
desired file.
Example: When programming tracks
on a CD
Press ENTER  to add the track
or file to the program.
Repeat steps 3 through 4 to
program additional tracks or
files, up to a total of 25 tracks or
files.
To play your program of tracks
or files, press  .
The program remains available until
you open the disc tray. To play the
same program again, press  .
Pre
stat
You ca
station
by sele
numbe
Use bu
station
Tu
“Li
13
Pre
Pre
se
nu
To cancel Program Play
Press PLAY MODE  repeatedly until
“PGM” disappears while the system is
stopped.
To delete the last track or file of the
program
If a
to
the
sta
Press CLEAR  while the system is
stopped.
Selected track or file number
Total playing time of
program (including
selected track or file)
Pre
Re
sto
Yo
AM
ret
you
po
22GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
rack
otal
utes
CD
er, or
You can preset your favorite radio
stations and tune them in instantly
by selecting the corresponding preset
number.
Use buttons on the remote to preset
stations.
Tune in the desired station (see
“Listening to the radio” (page
13)).
Press TUNER MEMORY .
cks
until
he
.
until
m is
To call up a preset radio
station, press TUNING MODE
 repeatedly until “PRESET”
appears, and then press +/ 
repeatedly to select the desired
preset number.
Other Operations
or
ks or
Presetting radio
stations
Preset number
he
Press +/  repeatedly to
select your desired preset
number.
If another station is already assigned
to the selected preset number,
the station is replaced by the new
stations.
Press ENTER .
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM and 10
AM stations. The preset stations are
retained for about half a day even if
you disconnect the power cord or if a
power failure occurs.
23GB
CMT-BX5BT.GB.3-095-507-11(1)
Using the Timers
The system offers two timer functions.
If you use the Play Timer with the Sleep
Timer, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This
function works even if the clock is not
set.
Press SLEEP  repeatedly.
Use the same procedure as in
step 4 to set the time to stop
playing.
Select the sound source.
If you select “AUTO,” the system
automatically turns off after the current
disc stops or in 100 minutes.
Play Timer:
You can wake up to CD or tuner at a
preset time.
Use buttons on the remote to control the
Play Timer. Make sure you have set the
clock.
Press /  to turn off the
system.
The system turns on 15 seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
Note
Before the system is turned off, if a connection
is made with the Bluetooth headphones,
sounds played by the Play Timer may be output
to the Bluetooth headphones.
Prepare the sound source.
To activate or check the timer again
Prepare the sound source, and then
press VOLUME +/  to adjust the
volume.
To start from a specific track or file,
create your own program (page 22).
Press CLOCK/TIMER SELECT , press
/  repeatedly until “PLAY
SEL” appears, and then press ENTER .
Press CLOCK/TIMER SET .
Press /  repeatedly
to select “PLAY SET,” and then
press ENTER .
“ON” appears, and the hour
indication flashes.
Press /  repeatedly until
the desired sound source appears, and
then press ENTER . The display
shows the timer settings.
Set the time to start playing.
Press /  repeatedly to set
the hour, and then press ENTER .
The minute indication flashes. Use the
procedure above to set the minutes.
24GB
CMT-BX5BT.GB.3-095-507-11(1)
To cancel the timer
Repeat the same procedure as above until
“TIMER OFF” appears, and then press
ENTER .
To change the setting
Start over from step 1.
Tip
The Play Timer setting remains as long as the
setting is not canceled manually.
Others
Troubleshooting
1 Make sure the power cord and
speaker cords are correctly and firmly
connected.
2 Find your problem in the checklist
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
 If your system has a voltage
selector, is the voltage selector set to
the correct voltage?
 Are you using only the supplied
speakers?
 Is anything blocking the ventilation
holes on the top or back of the
system?
After the STANDBY indicator 
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
General
Sound comes from one channel,
or the left and right volumes are
unbalanced.
 Place the speakers as symmetrically as
possible.
 Connect only the supplied speakers.
There is no sound.
 If the BLUETOOTH indicator  is lit
or flashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack . Press and hold
BLUETOOTH OPR  for about
2 seconds until the BLUETOOTH
indicator  turns off.
The remote does not function.
 Remove any obstacles between the
remote and the remote sensor  on
the unit, and position the unit away
from fluorescent lights.
 Point the remote at the system’s sensor.
 Move the remote closer to the system.
Others
below, and take the indicated
corrective action.
If the issue persists, contact your
nearest Sony dealer.
 Connect the system to a different wall
socket.
 Install a noise filter (available
separately) to the power cord.
CD/MP3 player
The sound skips, or the disc will not
play.
 Wipe the disc clean, and replace it.
 Move the system to a location away
from vibration (for example, on top of
a stable stand).
 Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Play does not start from the first
track.
 Press PLAY MODE  repeatedly until
both “PGM” and “SHUF” disappear to
return to normal play.
Severe hum or noise.
 Move the system away from sources of
noise.
Continued
CMT-BX5BT.GB.3-095-507-11(1)

25GB
Starting playback takes more time
than usual.
 The following discs take a longer time
to start playback.
 a disc recorded with a complicated
tree structure.
 a disc recorded in multisession
mode.
 a disc that has not been finalized (a
disc to which data can be added).
 a disc that has many folders.
Bluetooth device
Pairing cannot be done.
 Move the Bluetooth device closer to
the system.
Connection is not possible.
 The Bluetooth device you attempted
to connect does not support the A2DP
and AVRCP profiles, and cannot be
connected with the system.
 Enable the Bluetooth function of the
Bluetooth device.
 The pairing registration information
has been erased. Perform the pairing
operation again.
 While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
The sound skips or fluctuates, or the
connection is lost.
 The system and the Bluetooth device
are too far apart.
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
The sound of your Bluetooth device
cannot be heard on this system.
 Turn up the volume on your Bluetooth
device first, and then adjust the volume
using VOLUME +/ .
Severe hum or noise
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
 Turn down the volume of the
connected Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
 Turn down the volume of the system
using VOLUME  . If your
headphones have a volume control,
also adjust the volume using the
headphone’s volume control.
 Press DSGX  on the unit repeatedly
until “DSGX OFF” appears.
 Press EQ  repeatedly to select
“BASS” or “TREBLE,” and then press
  repeatedly to turn down the
level.
Tuner
Severe hum or noise, or stations
cannot be received. (“TUNED” or “ST”
flashes on the display.)
 Connect the antenna properly.
 Find a location and an orientation that
provide good reception, and then set
up the antenna again.
 Keep the antennas away from the
speaker cords and the power cord to
avoid picking up noise.
 Connect a commercially available
external antenna.
 Con
supp
plas
 Turn
To cha
The A
to 9 kH
Use bu
AM tu
1 Tun
turn
2 Wh
,
All
To r
pres
To imp
Turn o
CD po
defaul
1 Pre
sele
off
2 Afte
/
dow
“CD
play
tim
play
unt
26GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
vice
tooth
olume
 Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
 Turn off nearby electrical equipment.
To change the AM tuning interval
e,
es
sa
vice,
ve
The AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas).
Use buttons on the unit to change the
AM tuning interval.
1 Tune in any AM station, and then
turn off the system.
, press / .
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
tem
To improve tuner reception
ol,
Turn off CD player power by using the
CD power management function. By
default, CD power is turned on.
tedly
ress
r “ST”
If the system still does not operate
properly, reset the system to factory
settings.
Use buttons on the unit to reset the
system to its factory default settings.
1 Disconnect and reconnect the power
cord, and then turn on the system.
  , /CANCEL  and
/  at the same time.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.
2 Press
Others
2 While holding down TUNER/BAND
To reset the system to factory settings
1 Press FUNCTION  repeatedly to
select the CD function, and then turn
off the system.
2 After “STANDBY” stops flashing, press
/  on the unit while holding
down /CANCEL  on the unit.
“CD POWER OFF” appears. With CD
player power turned off, disc access
time is increased. To turn on CD
player power, repeat the procedure
until “CD POWER ON” appears.
n that
set
d to
27GB
CMT-BX5BT.GB.3-095-507-11(1)
Messages
CD/MP3 player, Tuner
CD OVER: You have reached the end of
the disc while pressing   during
playback or pause.
COMPLETE: The preset operation ended
normally.
INVALID: You pressed an invalid button.
LOCKED: The disc tray does not open.
Contact your nearest Sony dealer.
NO DISC: There is no disc in the system,
or you have loaded a disc that cannot
be played.
NO STEP: All of the programmed tracks
or files have been erased.
PUSH SELECT: You tried to set the clock
or timer during timer operation.
PUSH STOP: You pressed PLAY MODE
 during playback.
READING: The system is reading
information of the disc. Some buttons
are not available.
SET CLOCK: You tried to select the timer
when the clock is not set.
SET TIMER: You tried to select the timer
when the Play Timer is not set.
STEP FULL: You tried to program more
than 26 tracks or files (steps).
TIME NG: The Play Timer start and end
times are set to the same time.
Bluetooth device
CONNECT: Bluetooth communication
was established.
DISCONNCT: Communication with a
Bluetooth device was cut off for some
reason, or Bluetooth communication
was ended.
NO DEVICE: A pairable Bluetooth device
was not found, or connection was not
possible.
NOT IN USE: The system is not
connected with a Bluetooth device
using AVRCP.
PIN: The system is asking for the
passcode. For details, see “Using the
Bluetooth function” (page 14).
PLEASE WAIT: The system is readying
for usage of a Bluetooth device.
Displa
Displa
28GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
Display examples
ion
ha
ome
tion
Display
indicates
2 (two)
5 (five)
6 (six)
device
s not
8 (eight)
0 (zero)
ing
”
Discs that this system CAN play
 Audio CD
 CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
 CD-ROM
 CD-R/CD-RW other than those
recorded in music CD format or MP3
format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
 CD-R/CD-RW recorded in
multisession that have not ended by
“closing the session”
 CD-R/CD-RW of poor recording
quality, CD-R/CD-RW that have
scratches or are dirty, or CD-R/CDRW recorded with an incompatible
recording device
 CD-R/CD-RW which is finalized
incorrectly
 Discs containing files other than
MPEG 1 Audio Layer-3 (MP3) files
 Discs of non-standard shape (for
example, heart, square, star)
 Discs that have adhesive tape, paper, or
sticker attached to them
 Rental or used discs with attached seals
where the glue extends beyond the seal
 Discs that have labels printed using ink
that feels tacky when touched
Notes on discs
 Before playing, wipe the disc with a
cleaning cloth from the center out to
the edge.
 Do not clean discs with solvents, such
as benzine thinner, or commercially
available cleaners or anti-static spray
intended for vinyl LPs.
 Do not expose discs to direct sunlight
or heat sources such as hot air ducts,
nor leave it in a car parked in direct
sunlight.
Continued
CMT-BX5BT.GB.3-095-507-11(1)
Others
the
Precautions

29GB
On safety
 Completely disconnect the power
cord (mains lead) from the wall socket
(mains) if it is not going to be used
for an extended period of time. When
unplugging the unit, always grip the
plug. Never pull the cord itself.
 Should any solid object or liquid get
into the system, unplug the system, and
have it checked by qualified personnel
before operating it again.
 The AC power cord can be changed
only by a qualified service facility.
On placement
 Do not place the system in an inclined
position or in locations that are
extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation,
or subject to vibration, direct sunlight
or a bright light.
 Be careful when placing the unit
or speakers on surfaces that have
been specially treated (for example,
with wax, oil, polish) as staining or
discoloration of the surface may result.
 If the system is brought directly
from a cold to a warm location or is
placed in a very damp room, moisture
may condense on the lens inside the
CD player, and cause the system to
malfunction. In this situation, remove
the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
On the speaker system
This speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait
15 to 30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Cleaning the cabinet
Clean this system with a soft cloth
slightly moistened with a mild detergent
solution. Do not use any type of abrasive
pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
Spe
Main u
Receiv
AUDIO
POWE
HARM
With 6
from 1
channe
more t
from 2
Amplifi
Inputs
Outpu
Blueto
On heat buildup
 Heat buildup on the unit during
operation is normal and is not cause
for alarm.
 Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
 Do not obstruct the ventilation holes.
Comm
Outpu
Maxim
Freque
Modul
Compa
Suppor
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
1)
The
facto
magn
static
30GB
cally
TV
orted.
ait
n.
he
rgent
rasive
uch as
Specifications
Main unit (HCD-BX5BT/Compact Disc
Receiver)
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven,
from 120  10,000Hz; rated 12 watts per
channel minimum RMS power, with no
more than 10% total harmonic distortion
from 250 milliwatts to rated output.
Continuous RMS power output
(reference): 15 + 15 watts (6 ohms at
1 kHz, 10% THD)
Inputs:
AUDIO IN (stereo mini jack):
voltage 250 mV, impedance 47
kilohms
Outputs:
PHONES (stereo mini jack): accepts
headphones of 8 ohms or more
SPEAKER: accepts impedance of 6 to
16 ohms
Bluetooth section
Communication system:
Bluetooth Standard version 2.0
Output:
Bluetooth Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m1)
Frequency band:
2.4 GHz band (2.4000 GHz  2.4835
GHz)
Modulation method:
FHSS
Compatible Bluetooth profiles2):
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
Supported codecs:
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
1)
The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
CMT-BX5BT.GB.3-095-507-11(1)
CD player section
System: Compact disc and digital audio
system
Laser Diode Properties
Emission duration: continuous
Laser Output*: Less than 44.6μW
* This output is the value measurement
at a distance of 200mm from the
objective lens surface on the Optical
Pick-up Block with 7mm aperture.
Tuner section
FM stereo, FM/AM superheterodyne tuner
Others
Amplifier section
2)
antenna’s performance, operating system,
software application, etc.
Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
FM tuner section:
Tuning range: 87.5  108.0 MHz (100 kHz
step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
Tuning range:
530  1,710 kHz (with 10 kHz tuning
interval)
531  1,710 kHz (with 9 kHz tuning
interval)
Antenna: AM loop antenna, external
antenna terminal
Intermediate frequency: 450 kHz
Speaker (SS-CBX5)
Speaker system: Full Range 10 cm, cone
type
Nominal impedance: 6 ohms
Dimensions (w/h/d): Approx. 140 × 245 ×
210 mm
Mass: Approx. 1.9 kg net per speaker
Continued

31GB
General
Power requirements: 120 V AC, 60 Hz
Power consumption: 40 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 200 × 132 × 298 mm
Mass (excl. speakers): 3.5 kg
Supplied accessories: Remote Commander
(RM-SC31) (1), R6 (Size AA) batteries (2),
AM loop antenna (1), FM lead antenna (1)
Design and specifications are subject to
change without notice.
 Standby power consumption:
0.5 W
 Halogenated flame retardants
are not used in the certain
printed wiring boards.
Bluetooth wireless
technology
Bluetooth wireless technology is a shortrange wireless technology linking digital
devices, such as personal computers and
digital still cameras. Using the Bluetooth
wireless technology, you can operate the
units involved within a range of about 10
meters.
The Bluetooth wireless technology is
commonly used between two devices,
but a single device can be connected to
multiple devices.
You do not need wires to get connected
as you do with a USB connection, and
you do not need to place the devices face
to face as you do with wireless infrared
technology. You can use the technology
with one Bluetooth device in your bag
or pocket.
Bluetooth wireless technology is a global
standard supported by thousands of
companies. These companies produce
products that meet the global standard.
Supported Bluetooth version and
profiles
Profile refers to a standard set of
capabilities for various Bluetooth product
capabilities. This system supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
Effect
Blueto
approx
distan
comm
shorte
 Whe
or o
devi
 Loca
insta
 Aro
use
 Loca
wav
Effect
Blueto
(IEEE
band (
Blueto
wirele
interfe
in low
inabili
the fol
 Try
Blue
devi
met
equi
 Turn
equi
devi
Effect
The ra
may in
medic
may re
off the
mobile
the fol
 In h
at ga
flam
 Nea
32GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
Effective communication range
hortigital
s and
tooth
e the
out 10
cted
nd
s face
red
logy
bag
lobal
ce
ard.
roduct
he
ofiles.
Effects of other devices
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. This could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
 Try connecting this system and
Bluetooth mobile phone or Bluetooth
device when you are at least 10
meters away from the wireless LAN
equipment.
 Turn off the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
Notes
 This system supports security functions that
comply with the Bluetooth specification
as a means of ensuring security during
communication using Bluetooth technology.
However, this security may be insufficient
depending on the setting contents and
other factors, so always be careful when
performing communication using Bluetooth
technology.
 Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
 Bluetooth communication is not necessarily
guaranteed with all Bluetooth devices that
have the same profile as this system.
 Bluetooth devices connected with this system
must comply with the Bluetooth specification
prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even
when a device complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
 Noise may occur or the audio may
cut off depending on the Bluetooth
device connected with this system,
the communications environment, or
surrounding conditions.
Others
es,
d to
Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. The effective
communication range may become
shorter under the following conditions.
 When a person, metal object, wall
or other obstruction is between the
devices with a Bluetooth connection
 Locations where a wireless LAN is
installed
 Around microwave ovens that are in
use
 Locations where other electromagnetic
waves occur
Effects on other devices
ution
The radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn
off the power on this system, Bluetooth
mobile phone and Bluetooth device in
the following locations:
 In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gasses may be present
 Near automatic doors or fire alarms
33GB
CMT-BX5BT.GB.3-095-507-11(1)
Playable Bluetooth
devices
You can check the websites below for the
Bluetooth compatible devices.
For customers in the U.S.A.:

For customers in Canada:

For customers in Europe:

For customers in Latin America:

For customers in Asia and Oceania:

34GB
CMT-BX5BT.GB.3-095-507-11(1)
CMT-
Others
35GB
CMT-BX5BT.GB.3-095-507-11(1)
Printed in China
CMT-BX5BT.GB.3-095-507-11(1)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
GTS PDFX Version                : PDF/X-1:2001
Trapped                         : False
Producer                        : Acrobat Distiller 7.0.5 (Windows)
GTS PDFX Conformance            : PDF/X-1a:2001
Creator Tool                    : Adobe InDesign CS2 (4.0.4)
Modify Date                     : 2006:12:19 16:49:11+09:00
Create Date                     : 2006:12:06 16:21+09:00
Metadata Date                   : 2006:12:19 16:49:11+09:00
Format                          : application/pdf
Title                           : 3-095-507-11(1).indb
Creator                         : IMX
Document ID                     : uuid:2d3bd8be-7b18-4efc-9bd6-b26deba67e63
Instance ID                     : uuid:b779eaa1-218c-4c4f-b142-41089c5e786d
Has XFA                         : No
Page Count                      : 36
Author                          : IMX

EXIF Metadata provided by EXIF.tools