Sony Group HCDDH7BT DVD Receiver with Bluetooth User Manual 010COV indb

Download:
Mirror Download [FCC.gov]
Document ID	748506
Application ID	bQyDcH1dSz8E9Ibd83syZw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	121kB (1512457 bits)
Date Submitted	2007-01-18 00:00:00
Date Available	2007-04-06 00:00:00
Creation Date	2006-12-01 12:43:01
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-12-06 16:13:40
Document Title	010COV.indb
Document Creator	Adobe InDesign CS2 (4.0.4)
Document Author:	gotanda

3-097-195-11(1)
Micro HI-FI
Component System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record these
numbers in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. ______________ Serial No. ______________
CMT-DH7BT
© 2007 Sony Corporation
CMT-DH7BT.GB.3-097-195-11(1)
WARNING
To reduce the risk of fire or
electric shock, do not expose
this apparatus to rain or
moisture.
CAUTION
The use of optical instruments with this
product will increase eye hazard.
Notice for the customers in the
U.S.A.
This symbol is intended
to alert the user to the
presence of uninsulated
“dangerous voltage”
within the product’s
enclosure that may be
of sufficient magnitude
to constitute a risk
of electric shock to
persons.
This symbol is intended
to alert the user to the
presence of important
operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
Note to CATV system installer:
This reminder is provided to call the
CATV system installer’s attention to
Article 820-40 of the NEC that provides
guidelines for proper grounding and, in
particular, specifies that the cable ground
shall be connected to the grounding
system of the building, as close to the point
of cable entry as practical.
CAUT
You ar
modifi
this m
operat
The following FCC statement applies
only to the version of this model
manufactured for sale in the U.S.A.
Other versions may not comply with
FCC technical regulations.
This eq
radiati
uncon
FCC r
Guidel
This eq
level th
FCC r
Guidel
withou
evalua
it shou
least 2
and pe
hands,
WARNING
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
 Reorient or relocate the receiving
antenna.
 Increase the separation between the
equipment and receiver.
 Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
 Consult the dealer or an experienced
radio/TV technician for help.
This eq
operat
antenn
U.S.A
mode
2GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
des
, in
ound
e point
pplies
el
S.A.
with
found
the
d to
es,
CAUTION
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your authority to
operate this equipment.
This equipment must not be co-located or
operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC
radiation exposure limits set forth for
uncontrolled equipment and meets the
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65.
This equipment has a very low RF energy
level that is deemed to comply with
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65
without maximum permissive exposure
evaluation (MPE). But it is desirable that
it should be installed and operated with at
least 20cm and more between the radiator
and person’s body (excluding extremities:
hands, wrists, feet and legs).
About this manual
 Icons, such as
, listed at the top
of each explanation indicate what kind
of media can be used with the function
being explained.
 The English on-screen display is used
for illustration purposes only.
 The Control Menu items may be
different depending on the disc.
 The Setup Menu items may be different
depending on the area.
U.S.A., Canadian and Australian
models only
ere
ect
ENERGY STAR® is a U.S.
registered mark. As an
ENERGY STAR® partner,
Sony Corporation
has determined that
this product meets
the ENERGY STAR®
guidelines for energy
efficiency.
he
tlet
which
ed
3GB
CMT-DH7BT.GB.3-097-195-11(1)
Table of Contents
Play
Type
About this manual ............................... 3
Playable discs ........................................ 5
Guide to parts and controls ............. 8
Bluetooth
DVD V
Using the Bluetooth function ........52
Getting Started
Sound Adjustment
VR mo
Hooking up the system....................14
Hooking up the TV.............................17
Setting the clock ................................19
Performing QUICK SETUP ...............20
Using the THEATRE SYNC
function .................................................21
Adjusting the sound .........................58
VIDEO
Disc
Playing a disc .......................................23
 Normal Play
Using play mode ................................27
Searching/selecting a disc ..............31
Playing MP3/JPEG discs ...................34
Adjusting the delay between the
picture and sound .............................39
 A/V SYNC
Restricting playback of the disc ....39
 CUSTOM PARENTAL CONTROL,
PARENTAL CONTROL
Using the DVD setup menu............43
Tuner
Other operations
Using the timer ...................................59
Changing the display .......................60
Viewing information about the
disc .........................................................61
Hooking up optional
components.........................................64
Additional Information
Troubleshooting .................................66
Precautions...........................................75
Specifications ......................................76
Guide to the Control Menu
display ....................................................79
Language code list ............................82
Bluetooth wireless technology .....84
Playable Bluetooth devices ............85
Glossary .................................................86
Index...............................................................89
CD
DATA
DATA
This sy
1)
2)
Listening to the radio .......................48
3)
MP3
data.
JPEG
File S
Techn
A log
Stand
“DVD
tradem
4GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Playable discs
Type
DVD VIDEO
.....52
Characteristics
Icon used in
this manual
Logo
 DVD VIDEO
 DVD-R*/-RW*/+R/+RW
in DVD VIDEO format
* also in video mode
VR mode
.....58
VIDEO CD
.....59
.....60
CD
 DVD-R/-RW
in VR (Video Recording) mode
 VIDEO CD
 Super VCD*
 CD-ROM*/-R*/-RW*
* in VIDEO CD or Super VCD format
.....61
* in AUDIO CD format
DATA CD
 CD-ROM/-R/-RW
in DATA CD format, containing
MP3 audio tracks1) and/or JPEG
image files2), and conforming to
ISO 96603) Level 1 or Level 2, or
Joliet (expansion format).
DATA DVD
 DVD-ROM/-R/-RW/+R/+RW
in DATA DVD format containing
MP3 audio tracks1) and/or JPEG
image files2), and conforming to
UDF (Universal Disk Format).
.....64
.....66
.....75
.....76
.....79
.....82
.....84
.....85
.....86
......89
 AUDIO CD*
 CD-R*/-RW*
This system can also play back discs with the following disc logos:
1)
2)
3)
MP3 (MPEG 1 Audio Layer 3) is a standard format defined by ISO/MPEG which compresses audio
data. MP3 audio tracks must be in MPEG 1 Audio Layer 3 format.
JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera
File System”: Image standards for digital cameras regulated by Japan Electronics and Information
Technology Industries Association (JEITA)).
A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for
Standardization).
“DVD+RW”, “DVD-RW”, “DVD+R”, “DVD VIDEO”, and the “CD” logos are
trademarks.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

5GB
Discs that cannot be played
 CD-ROMs recorded in PHOTO CD
format
 DATA CDs recorded in MP3 PRO
format
 Data part of CD-Extras1)
 Data part of Mixed CDs2)
 Super Audio CDs
 DVD Audio discs
 DVD-RAMs
 A DVD VIDEO with a different region
code.
 A disc that has a non-standard shape
(e.g., heart, square, star).
 A disc that has the adhesive cellophane
tape or a sticker still left on it.
1)
2)
CD-Extra: This format records audio
(AUDIO CD data) on the tracks in session 1
and data on the tracks in session 2.
Mixed CD: This format records data on the
first track and audio (AUDIO CD data)
on the second and subsequent tracks of a
session.
Region code of DVD VIDEOs you
can play back on this system
Your system has a region code printed
on the back of the unit and will only
play back DVD VIDEOs labeled with
identical region code.
DVD VIDEOs labeled ALL will also be
played back on this system.
If you try to play back any other region
code DVD VIDEO, the message
“Playback prohibited by area limitations.”
will appear on the TV screen. Depending
on the DVD VIDEO, no region code
indication may be labeled even though
playing the DVD VIDEO is prohibited by
area restrictions.
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material
on one side with digital audio material
on the other side. However, since the
audio material side does not conform to
Compact Disc (CD) standard, playback
on this product is not guaranteed.
Notes on CD-R/-RW and
DVD-R/-RW/+R/+RW
 In some cases, CD-Rs/-RWs and
DVD-Rs/-RWs/+Rs/+RWs cannot be
played back on this system due to the
recording quality or physical condition
of the disc, or the characteristics of
the recording device and authoring
software. The disc will not be played
back if it has not been correctly
finalized. For more information, see
the operation instructions for the
recording device.
 Note that some playback functions
may not work with some DVD+RWs/
+Rs, even if they have been correctly
finalized. In this case, view the disc by
normal playback.
 A disc created in Packet Write format
cannot be played back.
Note on playback operations of
DVD VIDEOs and VIDEO CDs
Some playback operations of DVD
VIDEOs and VIDEO CDs may be
intentionally set by software producers.
Since t
VIDEO
the dis
design
not be
instru
VIDEO
Mus
copy
This p
discs t
(CD) s
discs e
techno
record
among
do not
may n
Note
 This
Sess
(or a
the fi
audi
reco
play
 If th
AUD
only
back
 The
Sess
is a
form
syste
the fi
CD
6GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
duct
al
rial
he
m to
back
Since this system play back DVD
VIDEOs and VIDEO CDs according to
the disc contents the software producers
designed, some playback features may
not be available. Also, refer to the
instructions supplied with the DVD
VIDEOs or VIDEO CDs.
Music discs encoded with
copyright protection technologies
ot be
o the
dition
of
ng
yed
see
ns
RWs/
ctly
sc by
rmat
s of
cers.
This product is designed to play back
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some
record companies. Please be aware that
among those discs, there are some that
do not conform to the CD standard and
may not be playable by this product.
Notes on Multi Session disc
 This system can play back Multi
Session discs when an MP3 audio track
(or a JPEG image file) is contained in
the first session. Any subsequent MP3
audio tracks (or JPEG image files)
recorded in later sessions can also be
played back.
 If the first session is recorded in
AUDIO CD or VIDEO CD format,
only the first session will be played
back.
 The system will recognize a Multi
Session disc as an AUDIO CD if there
is a session recorded in AUDIO CD
format on the disc. However, the
system will only play back the disc if
the first session is recorded in AUDIO
CD format.
Copyrights
This product incorporates copyright
protection technology that is protected
by U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be
authorized by Macrovision, and is
intended for home and other limited
viewing uses only unless otherwise
authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
 This system incorporates Dolby*
Digital and the DTS** Digital
Surround System.
* Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
**Manufactured under license from Digital
Theater Systems, Inc.
“DTS” and “ DTS Digital Surround” are
registered trademarks of Digital Theater
Systems, Inc.
 The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those
of their respective owners.
 MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and Thomson.
 The XM name and related logos are
registered trademarks of XM Satellite
Radio Inc.
 (c) 2006 SIRIUS Satellite Radio Inc.
“SIRIUS” and the SIRIUS dog logo
are registered trademarks of SIRIUS
Satellite Radio Inc.
7GB
CMT-DH7BT.GB.3-097-195-11(1)
Guide to parts and controls
Remo
This manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit (HCD-DH7BT/Compact Disc Receiver)
Front panel












Top panel


Unit:
79)
Remo
(11)
Press t
Press t

STAN
Lights
8GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-

Remote control (RM-SCD30)
Lights up when the Bluetooth function
is active.
can





























Unit:  (on/standby) (11, 69,
79)
Remote: TV  2) (on/standby)
(11)
Press to turn on the system.
Press to turn on the TV.
BLUETOOTH OPR (57)
Press to make a connection,
disconnection, or pairing with a
Bluetooth device.

 (eject) (59, 72)
Press to eject the disc.
Guide to parts and controls
BLUETOOTH indicator (60, 80)
   

Disc slot (73)

+/ (15, 19)
Press to select an album.

PRESET +/ (XX)
Press to return the settings to the default
setting.
/ (go backward/
forward) (19, 54)
Press to select a track or file.
Remote: TV CH +/2) (11)
Press to change the TV channels.
Remote: SLOW
(34)
Press to watch the slow-motion play.
Remote: TUNING +/ (51)
Press to tune in the desired station.

/ (rewind/fast forward)
(34, 54)
STANDBY indicator (71)
Press to find a point in a track or file.
Lights up when the system is turned off.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

9GB

Unit: AUDIO IN (XX, XX)

AUDIO IN jack (55, 56, 68)
Press to select the AUDIO IN function.
AUDI
Connect to an optional audio
component.

PHONES jack (55)
FUNCTION +/ (14, 51, 54, 63,
70, 78)
Press to select the function.
Connect the headphones.


Unit: REPEAT/FM MODE (XX, XX)
Remote: FM MODE (53)
Remote: REPEAT (25)
DISPLAY (19)
Press to display the disc information or
clock in the front panel display.

PROGRESSIVE (XX, XX)
Press to select FM reception mode
(monaural or stereo).
Press to listen to a disc, a single track or
file repeatedly.
Press to change the output video format
(INTERLACE or PROGRESSIVE
format).


Press to stop or pause playback.
DSGX (XX)
Press to select the sound effect.

IR Receptor (52)
 (stop) (19, 39, 52, 54, 70, 81)
 (pause) (19, 54)
Press t
on the

SUBT
Press t
subtitl

ANGL
Press t
with m

DVD/
Press t
TV scr
Press t
Remote: 1) (play) (19, 42, 54,
56, 68, 70)

Press to start playback.
Press t


Remote: TV VOL +/1)2) (11)
DIS
92)
EQ (5

Press to adjust the TV volume.
Unit: DVD  (play) (XX, XX)
VOLUME +/1) (51, 69, 73, 79)
Press to select the DVD function.
Press to start playback of a disc.
Press to adjust the volume.
Press t
TV scr

Unit: BLUETOOTH  (XX, XX)

DIMMER (20)
TV2) (
Press to adjust the brightness of the
display.
Press t

ADVA
PICTURE NAVI (29)
Press t
playba
Press to select the Bluetooth function.
Press to start playback of the music on
the Bluetooth device (Bluetooth mobile
phone, etc.).
Unit: TUNER/BAND (XX, XX)
Press to select the TUNER function.
Press to switch among FM, AM, XM and
SIRIUS band.
Press to select the VIEWER format for
searching the chapters, titles and tracks.
Press to display the thumbnail pictures.

REPL
Press t
playba
10GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
 STEP/ STEP  (20)
AUDIO (29, 37, 63, 78)
Press to play one frame at a time when
playback is paused.
3,
Press to display the current audio signal
on the TV screen.

RETURN (26)
SUBTITLE (38)
XX)
Press to switch the language of the
subtitle (DVD VIDEO).

Press to change the angle (DVD VIDEO
with multi-angles only).
1)
4,
Press to select the MENU items.
ENTER (14, 19, 39, 50, 63, 69)
DVD/TUNER MENU (25, 51)

Press to display the MENU items on the
TV screen.
Press to preset the radio station.
DVD TOP MENU (25)


EQ (57, 78)
CLEAR (15, 48)
Press to adjust the sound level.
Press to delete a pre-programmed track
or file.
Press to delete a SIRIUS Parental Lock
password entry.
Press to erase the pairing registration
information of the Bluetooth device.
DISPLAY (15, 21, 23, 39, 63, 75,
92)
Press to display the Control Menu on the
TV screen.

TV2) (11)
Press to operate the TV functions.
Press to display the DVD title on the TV
screen.
-/--2) (11)
Press to change the entering mode for a
single digit and double digit number.

Numeric buttons1) (11, 19, 40, 53)
Press to advance the current scene during
playback.
Press to select a track, file or satellite
channel.
Press to enter a SIRIUS Parental Lock
password.
Press to enter a Bluetooth passcode.
REPLAY
10/02)

ADVANCE
for
acks.
ures.

Press to enter the settings.


Press to return to the previous menu on
the TV screen.
/// (14, 22, 39, 50, 58, 69,
84)
ANGLE (38)
ck or

Guide to parts and controls

ion.
(20)
(20)
Press to replay the previous scene during
playback.
Press to enter a double digit number.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

11GB

Displa
XM (XX, XX)
Press to select XM band.
SIRIUS (XX, XX)
Press to select SIRIUS band.

CATEGORY +/ (XX, XX)
Press to select a satellite radio category.
CATEGORY MODE (XX, XX)
Press to select the tuning mode for XM
or SIRIUS band.

TIME/TEXT (73)
Press to change the information in the
front panel display.

TV/VIDEO2) (11)
Press to switch the input sources.
SLEEP (53, 69)
Press to set the Sleep Timer.

TIMER MENU (14, 69)
Press to set the clock and the timers.

THEATRE SYNC (XX, XX)
Press to register the input sources and
functions.
Press to activate the THEATRE SYNC
function.
1)
2)
 Ind
 Ind
 Lig
 Lig
(xx
 Lig
(62
 Ind
 Lig
 Lig
sel
 Lig
is s
The numeric button 5, TV VOL +,
VOLUME + and  buttons have a tactile
dot. Use the tactile dot as a reference when
operating the system.
This button is used to operate a Sony TV.
For details, see “Operating a Sony TV” on
page 11.
12GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Display
Guide to parts and controls
 Indicates the selected function. (21)
 Indicates the selected play mode. (16)
 Lights up when timer is set. (56)
 Lights up when a station is tuned in.
(xx)
 Lights up when DSGX is turned on.
(62)
 Indicates the Playback status. (xx)
 Lights up when DTS is selected. (63)
 Lights up when Dolby Digital is
selected. (xx)
 Lights up when CATEGORY MODE
is selected. (xx)
 Lights up when “P AUTO” or
“P VIDEO” is selected. (xx)
 Lights up when playing VIDEO CD
with PBC. (xx)
 Lights up when an MP3 disc is
loaded. (xx)
 Indicates the track/file information.
(xx)
 Lights up when chapter or title
number is displayed. (xx)
 Indicates the type of disc being played
back. (xx)
 Displays the text information. (xx)
13GB
CMT-DH7BT.GB.3-097-195-11(1)
 SI
Getting Started
Conne
When
tuner w
the AC
tuner t
Keep t
antenn
from t
cord to
Hooking up the system
Wall socket
 XM
Conne
Dock.
Satellit
 Sp
 Po
Conne
If the s
not fit
the plu
an ada
Right speaker
Left speaker
 SiriusConnect Home tuner (not supplied)
 Home indoor/outdoor antenna (not supplied)*
 AC power adaptor (not supplied)*
 DIN cable (not supplied)*
 XM Mini-Tuner and Home Dock (not supplied)
 FM lead antenna (Extend it horizontally.)
 Connect white side.
 AM loop antenna
* Supplied with SiriusConnect Home tuner
Wall socket
Inse
batt
 FM/AM antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords and the power cord to avoid
picking up noise.
Note
If you d
of time
damage
14GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
 SIRIUS antenna
 XM antenna
Connect the XM Mini-Tuner and Home
Dock. For details, see “To receive the XM
Satellite Radio” (page xx)
With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
Attaching the speaker pads
Attach the supplied speaker pads at each
corner on the bottom of the speakers
to stabilize the speakers and to prevent
them from slipping.
Getting Started
Connect the SiriusConnect Home tuner.
When you use the SiriusConnect Home
tuner with this system, be sure to connect
the AC power adaptor supplied with the
tuner to a wall socket.
Keep the SiriusConnect Home tuner,
antenna, and AC power adaptor away
from the speaker cords and the power
cord to avoid picking up noise.
Tip
Front speaker of SS-CDH3
 Speakers
 Power
Connect the power cord to a wall socket.
If the supplied adaptor on the plug does
not fit your wall socket, detach it from
the plug (only for models equipped with
an adaptor).
When carrying this system
Inserting two R6 (size AA)
batteries into the remote
Perform the following procedure to
protect the DVD mechanism.
Use buttons on the unit for the
operation.
1 Press /  to turn on the
system, then press DVD .
hat
et up
2 Make sure that no disc is loaded
in the system and check that “No
Disc” appears.
peaker
3 Press /  to turn off the
Note
If you do not use the remote for a long period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
system and check that “STANDBY”
disappears.
4 Unplug the power cord.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

15GB
Receiving the XM Satellite
Radio
ABOUT XM SATELLITE RADIO
XM offers over 170 digital radio channels: the
most commercial-free music channels, premier
news, sports, talk, and traffic and weather in
21 metro markets. XM’s on-air hosts broadcast
live from studios in Washington, D.C., New
York City and Nashville.
For more information or to subscribe in the
US, visit xmradio.com or call Listener Care at
1-800-XMRADIO (1-800-967-2346).
XM READY® LEGAL
XM monthly service subscription sold
separately. XM Mini-Tuner and Home Dock
required (each sold separately) to receive
XM service. Installation costs and other fees
and taxes, including a one-time activation
fee may apply. Subscription fee is consumer
only. All fees and programming subject to
change. Channels with frequent explicit
language are indicated with an XL. Channel
blocking is available for XM radio receivers by
calling 1-800-XMRADIO (1-800-967-2346).
For a full listing of the XM commercial-free
channels and advertising supported channels,
visit lineup.xmradio.com. Subscriptions
subject to Customer Agreement available at
xmradio.com. XM service only available in
the 48 contiguous United States. XM Satellite
Radio and XM Ready are trademarks of XM
Satellite Radio Inc. (C)2006 XM Satellite Radio
Inc. All rights reserved.
XM READY® SUBSCRIPTIONS
There are three places to find your
eight character XM Radio ID: on the
XM Mini-Tuner, on the XM Mini-Tuner
package, and on XM Channel 0. Record the
Radio ID in the following eight squares for
reference.
Note: The XM Radio ID does not use the
letters “I”, “O”, “S” or “F”. Activate your XM
Satellite Radio service in the U.S. online
at http://activate.xmradio.com or call
1-800-XM-RADIO (1-800-967-2346). You
will need a major credit card. XM will send
a signal from the satellites to activate the full
channel lineup. Activation normally takes 10
to 15 minutes, but during peak busy periods
you may need to keep your XM Ready home
audio system on for up to an hour. When you
can access the full channel lineup on your XM
Ready home audio system you are done.
Rece
Rad
SIRIU
On Ra
With ev
music t
talk and
always
 The o
musi
musi
heard
 Live p
bigge
week
and o
a wee
over
exclu
 Enter
be fo
of Ho
Jeff F
Maxi
 Espec
her te
Cosm
Radio
 Worl
Fox,
weath
 Fami
with
Laug
Once you have installed the XM Mini-Tuner
Dock, inserted the XM Mini-Tuner, connected
the XM Dock to your XM Ready® home audio
system, and installed the antenna, you are
ready to subscribe and begin receiving XM
programming.
16GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
the
for
Receiving the SIRIUS Satellite
Radio
XM
ou
nd
full
es 10
ods
ome
n you
ur XM
With everything from 100% commercial-free
music to in-depth sports coverage, plus news,
talk and the hottest entertainment  you can
always hear exactly what you want.
 The only home of 100% commercial-free
music. Whether you’re discovering new
music, or rediscovering songs you haven’t
heard in years  you’ll hear it all on SIRIUS.
 Live play-by-play and expert talk from the
biggest leagues. NFL, every game, every
week, everywhere. Plus NFL Radio 24/7 news
and opinions from top NFL pros, 40 games
a week from NBA and College Sports from
over 150 schools. Plus NASCAR moving
exclusively to SIRIUS in January 2007.
 Entertainment, Comedy and Talk that can’t
be found anywhere else. From 2 channels
of Howard Stern, Blue Collar Comedy with
Jeff Foxworthy and Larry the Cable Guy to
Maxim and Playboy Radio.
 Especially for Women. Martha Stewart and
her team will inspire you 24/7 along with
Cosmo Radio, Deepak Chopra Wellness
Radio and other exclusive talk show hosts.
 World Class News, traffic and weather.
Fox, CNN, NPR and BBC. Local traffic and
weather for the top 20 cities.
 Family & Kids: G-rated fun for everyone
with Radio Disney, Discovery Kids Channel,
Laugh Comedy and more.
Connect the video input jack of your
TV to the VIDEO OUT jack with the
supplied video cord.
Getting Started
SIRIUS Satellite Radio: The Best Radio
On Radio
Hooking up the TV
When connecting a video deck
Connect the video deck to the TV using
a video cord (not supplied). However, do
not connect this unit to the TV through
the video deck. Otherwise, you may
experience video leakage when watching
video images from this system. Connect
this unit directly to the TV as shown
below.
TV
Video deck
Unit
Do not connect
directly
Continued
CMT-DH7BT.GB.3-097-195-11(1)

17GB
Tip
For higher quality video images:
 Use the optional component video cords to
connect the COMPONENT VIDEO input
jacks on your TV to the COMPONENT
VIDEO OUT jacks of this unit. If your
TV is compatible with progressive format
file signals, use this connection and press
PROGRESSIVE on the unit repeatedly until
“P AUTO” or “P VIDEO” appears in the
display (page 16).
 You can use an optional S Video cord to
connect the S VIDEO input jack on your
TV to the S VIDEO OUT jack of this unit.
Changing the format of the
video signal output from
COMPONENT VIDEO OUT jacks
Progressive is a method for displaying
TV images that reduces flickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
You can output video signals from
COMPONENT VIDEO OUT jacks in
INTERLACE or PROGRESSIVE format.
Press FUNCTION +/ 
repeatedly to select “DVD” (or
press DVD   on the unit).
Press PROGRESSIVE  on the
unit repeatedly.
P VIDEO (PROGRESSIVE VIDEO):
The system fixes the conversion
method to PROGRESSIVE VIDEO
for video-based software.
Select this if the image is not clear
when you select “P AUTO”.
About DVD VIDEO software types and
the conversion method
The DVD VIDEO software can be
divided into 2 types:
 Film-based software
Film-based software is derived from
film and displays the images at 24
frames per second.
 Video-based software
Video-based software is derived from
TV, such as dramas and sitcoms and
displays images at 30 frames or 60
fields per second.
Some DVD VIDEO contains both types
of software. In order for these images to
appear in your TV naturally when the
video output is in progressive format, the
progressive signals need to be converted
to match your DVD VIDEO software.
Note
There would be no image on your TV or the
image is not clear if your setting does not
match your TV or connection.
Whe
Turn o
input s
from t
Opera
You ca
operat
been m
To
Turn t
or off
Switch
input s
betwee
and ot
source
Select
chann
Adjust
volum
speake
* For d
and p
(For
press
Select “P AUTO” or “P VIDEO” if
your TV accepts progressive signals
and the TV is connected to the
COMPONENT VIDEO OUT jacks.
Otherwise, select “INTERLACE”.
P AUTO (PROGRESSIVE AUTO):
The system automatically detects
the software type and selects the
appropriate conversion method.
18GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
O):
When using a TV
EO
Turn on the TV and select the video
input so that you can view the pictures
from this system.
and
Operating a Sony TV
You can use the following buttons to
operate a Sony TV. These buttons have
been marked in orange.
om
rom
and
ypes
es to
he
at, the
erted
re.
the
To
Turn the TV on
or off
Switch the TV’s
input source
between the TV
and other input
sources
Select the TV
channels
Adjust the
volume of the TV
speaker(s)
Use buttons on the remote to set the
clock.
Press /  to turn on the
system.
Press TIMER MENU .
The hour indication flashes in the
display.
If “PLAY SET?” flashes in the
display, press  or   repeatedly
to select “CLOCK SET?”, then press
ENTER .
Hold down TV 
and press
TV / 
TV/VIDEO 
TV CH +/ 
or numeric
buttons *
TV VOL +/ 
* For double digit number, hold down TV 
and press -/-- , then press the number.
(For example, hold down TV ,
press -/-- , then 2 and 5 for entering 25.)
Press  or   repeatedly to set
the hour.
Press ENTER .
Getting Started
ar
Setting the clock
The minute indication flashes in the
display.
Press  or   repeatedly to set
the minute.
Press ENTER .
The clock starts functioning.
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the system
is off
Press DISPLAY .
The clock is displayed for about
8 seconds.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

19GB
Performing QUICK
SETUP
Tips
 The selected language is for “OSD”,
“MENU” and “SUBTITLE ”.
 The selectable language is different
depending on the area.
Before using the system, you can make
the minimum basic adjustments in
QUICK SETUP. If you do not want
to perform QUICK SETUP, press
CLEAR  in step 3. The guide message
will disappear from the TV screen.
Turn on your TV and select the
video input.
The setting is selected and the
“SCREEN SETUP” display appears on
the TV screen.
Press /  to turn on the
system.
Make sure there is no disc in the unit.
Otherwise, the guide message does not
appear. To perform QUICK SETUP, press
  on the unit to remove the disc.
Press FUNCTION +/ 
repeatedly to select “DVD” (or
press DVD   on the unit).
The guide message appears at the
bottom of the TV screen.
Press ENTER  without
inserting a disc.
The “LANGUAGE SETUP” display
appears on the TV screen.
Press  or   repeatedly to
select the setting that matches
your TV type.
If you have a 4:3 standard TV:
Select 4:3 LETTER BOX or 4:3 PAN
SCAN (page 45)
Note
Press  or   repeatedly to
select a language, then press
ENTER .
To rec
1 Pre
is st
The
scre
2 Pre
sele
ENT
3 Pre
“QU
Note
The gui
the TV
for the
(see pa
If you have a wide-screen TV or a
4:3 standard TV with wide-screen
mode:
Select 16:9 (page 45)
Press ENTER .
The setting is selected and the
“QUICK SETUP is complete.” display
appears on the TV screen.
The system is ready for playback.
If you want to change each setting
individually, see “Using the DVD
setup menu” on page 43.
To quit QUICK SETUP
Press
DISPLAY .
20GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
to
ss
To recall of QUICK SETUP settings
Press  or   repeatedly to
select
ENTER .
ars on
(SETUP), then press
Using the THEATRE
SYNC function
THEATRE SYNC allows you to turn on
your Sony TV and this system, changes
the system’s function to “DVD” and then
switches the TV’s input source you have
set with just one button.
3 Press  or   repeatedly to select
“QUICK”, then press ENTER .
to
hes
PAN
Note
The guide message appears at the bottom of
the TV screen when you turn on the system
for the first time or after performing “RESET”
(see page 84).
or a
reen
isplay
k.
ng
Getting Started
”,
DISPLAY  when playback
is stopped.
The Control Menu appears on the TV
screen.
1 Press
Preparing to use the THEATRE
SYNC function
Register the TV’s input source connected
to this system.
Hold down
SLEEP  and
press
To select the
following TV’s input
source
No input source
(Default)
1 to 8
CLEAR 
VIDEO 1 to VIDEO 8
COMPONENT 1
COMPONENT 2

COMPONENT 3
COMPONENT 4
The selected TV’s input source is
memorized into the remote.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

21GB
Operating the THEATRE SYNC
function
Keep the remote pointed in the
direction of the TV until the TV is
turned on and the input source
is changed correctly, then press
THEATRE SYNC .
If this function does not work, change the
transmission time. The transmission time
varies depending on the TV.
To change the transmission time
Hold down
  and
press
To select the
following
transmission time
0.5 (Default)
1.5
2.5
3.5
22GB
CMT-DH7BT.GB.3-097-195-11(1)
Notes
Disc
Playing a disc
 Normal Play
Example: When playing a DVD VIDEO
Title number
Elapsed playing time
Press FUNCTION +/ 
repeatedly to select “DVD” (or
press DVD   on the unit).
Insert a disc with the label side
facing up.
Press  .
Other operations
To
Press
Stop playback  .
Pause playback  . Press   again
or   to resume
playback.
Select a track1),  or  
chapter or
repeatedly during
video file
playback.
Or, press the numeric
buttons  when
the Control Menu is
turned off, then press
ENTER 2).
Select an
+/  repeatedly
album3)
during playback or
when playback is
paused.
Locate a point  or  
quickly in fast during playback.
forward or fast Each time you press
reverse (Lock  or  , the
playback speed changes
Search)4)5)
cyclically.
To return to normal
playback, press  .
Press VOLUME +/  to adjust
the volume.
Continued
CMT-DH7BT.GB.3-097-195-11(1)
Disc
Depending on the DVD VIDEO or
VIDEO CD, some operations may
be different or restricted. Refer to the
operating instructions supplied with the
disc.
 Depending on the system status, the volume
level may not appear on the TV screen.
 When you turn on the system, the disc is
not pulled into the disc slot until “No Disc”
appears in the display. Do not attempt to
push in the disc until “No Disc” appears.
 Do not load an 8 cm disc with an adaptor.
Doing so may cause the system to
malfunction.
 When you remove a disc, handle the disc by
its edge and pull it straight out of the disc
slot. Do not touch the surface.

23GB
To
Watch frame by
frame (Slowmotion Play)6)
Press
SLOW
or SLOW
 when playback
is paused. Each time
you press SLOW
,
or SLOW
the playback speed
changes.
To return to normal
playback, press  .
Play one
STEP   to go to
frame at a
the next frame when
time (Freeze
playback is paused.
Frame)6)
Press  STEP 7)
to go to the preceding
frame when playback is
paused.
To return to normal
playback, press  .
 during
Replay the
REPLAY
previous scene playback. (Instant
Replay)7)

Briefly fast
ADVANCE
forward the
during playback.
current scene (Instant Advance)7)
Switch to DVD FUNCTION +/ 
function from repeatedly (or press
another source DVD   on the
unit) (Automatic
Source Selection).
Remove the
  on the unit.
disc
1)
2)
3)
4)
5)
6)
7)
You cannot select an audio track during
Lock Search operation of MP3 audio tracks.
DVD VIDEO, DVD-R/-RW in VR mode,
VIDEO CD and AUDIO CD only.
MP3 audio tracks and JPEG image files only.
Except for JPEG image files.
Depending on the disc, the actual speed may
differ.
DVD VIDEO, DVD-R/-RW in VR mode,
and VIDEO CD only.
DVD VIDEO and DVD-R/-RW in VR mode
only.
24GB
CMT-DH7BT.GB.3-097-195-11(1)
Notes
 You cannot search for a still picture on a
DVD-R/-RW in VR mode.
 You may not be able to use the Instant Replay
or Instant Advance function in Repeat Play
mode or with some scenes.
Press S
during
SUBT
change
Note
Displaying multi-angles and
subtitles
Depend
not be
multilin
VIDEO
subtitle
Changing the angles
(DVD VIDEO only)
You can change the viewing angle while
playing a DVD VIDEO on which various
angles (multi-angles) for a scene are
recorded.
Press ANGLE  repeatedly during
playback. Each time you press
ANGLE , the angle changes.
Note
Depending on the DVD VIDEO, you may not
be able to change the angle, even if multi-angles
are recorded on the DVD VIDEO.
Displaying the subtitles
(DVD VIDEO and DVD-R/-RW in VR
mode only)
You can turn the subtitles on or off while
playing a DVD VIDEO or DVD-R/RW in VR mode on which subtitles
are recorded. You can also change the
language of the subtitles with DVD
VIDEO, DVD-R/-RW in VR mode on
which multilingual subtitles are recorded.
Othe
Chang
When
in mul
the au
VIDEO
tracks
When
CD or
the sou
and lis
chann
speake
track w
and th
you ca
speake
Press A
playba
want.
The de
When
Depen
option
varies.
When
digits
“Langu
the sam
more t
in mul
CMT-
a
Replay
Play
Press SUBTITLE  repeatedly
during playback. Each time you press
SUBTITLE , the subtitle language
changes or turns off.
Note
while
arious
Other useful functions
Changing the sound
When playing a DVD VIDEO recorded
in multiple audio formats, you can select
the audio format you want. If the DVD
VIDEO is recorded with multilingual
tracks, you can also change the language.
ay not
-angles
VR
while
he
on
orded.
When playing a VIDEO CD, AUDIO
CD or MP3 audio tracks, you can select
the sound from the right or left channel
and listen to the sound of the selected
channel through both the right and left
speakers. For example, when playing a
track with the vocals on the right channel
and the instruments on the left channel,
you can hear the instruments from both
speakers by selecting the left channel.
Press AUDIO  repeatedly during
playback to select the audio signal you
want.
The default settings are underlined.
When playing a DVD VIDEO:
Depending on the DVD VIDEO, the
option of language and audio format
varies.
When a 4-digit number is displayed, the
digits represent a language code (see
“Language code list” on page 97). When
the same language is displayed two or
more times, the DVD VIDEO is recorded
in multiple audio formats. Note that the
CMT-DH7BT.GB.3-097-195-11(1)
When playing a DVD-R/-RW in VR
mode:
The number of audio tracks recorded on
a disc are displayed.
Example:
 1: MAIN: the main sound of the audio
track 1.
 1: SUB: the sub sound of the audio
track 1.
 1: MAIN+SUB: the main and sub
sound of the audio track 1.
 2: MAIN*: the main sound of the audio
track 2.
 2: SUB*: the sub sound of the audio
track 2.
 2: MAIN+SUB*: the main and sub
sound of the audio track 2.
Disc
Depending on the DVD VIDEO, you may
not be able to change the subtitles even if
multilingual subtitles are recorded on the DVD
VIDEO. You also may not be able to turn the
subtitles off.
sound changes automatically depending
on the disc.
* These items do not appear if only one audio
stream is recorded on the disc being played
back.
When playing a VIDEO CD, AUDIO CD,
or MP3 audio track:
 STEREO: the standard stereo sound.
 1/L: the sound of the left channel
(monaural).
 2/R: the sound of the right channel
(monaural).
When playing a Super VCD:
 1: STEREO: the stereo sound of the
audio track 1.
 1: 1/L: the sound of the left channel of
the audio track 1 (monaural).
 1: 2/R: the sound of the right channel
of the audio track 1 (monaural).
 2: STEREO: the stereo sound of the
audio track 2.
 2: 1/L: the sound of the left channel of
the audio track 2 (monaural).
 2: 2/R: the sound of the right channel
of the audio track 2 (monaural).
Continued

25GB
Playing VIDEO CDs with PBC functions
(Version 2.0)  PBC Playback
To cancel playback with PBC
functions
(VIDEO CD only)
You can use the PBC (Playback Control)
menus on your TV screen to enjoy
the disc’s interactive software. The
menu format and structure may differ
depending on each disc.
1 Press  or   repeatedly
 Depe
the sy
the ex
 If “M
Resu
VIDE
disc o
2 Press   or ENTER .
Tip
1 Press   to start playing a VIDEO
Playback starts from the selected track.
Still images, such as the menu screens,
will not be shown.
To return to PBC playback, press  
twice, then press  .
Resum
stopp
CD with PBC functions (Version 2.0).
The PBC menu appears on the TV
screen. Depending on the VIDEO CD,
the menu may not appear.
2 Press the numeric buttons  to
select the item number you want.
3 Press ENTER .
Depending on the VIDEO CD,
“Press ENTER” may appear as “Press
SELECT” in the operating instructions
supplied with the disc. In this case,
press  .
4 Continue playback according to the
instructions on the menus.
Refer to the operating instructions
supplied with the VIDEO CD, as
the operating procedure may differ
depending on the VIDEO CD.
To return to the previous menu
Press RETURN .
Note
PBC playback is canceled when Shuffle Play,
Program Play or Repeat Play is activated.
or press the numeric buttons 
to select a track when playback is
stopped.
Resuming playback from the point you
stopped the disc  Resume Play
This system memorizes the point where
you stopped the disc so you can resume
playback from that point. Resume Play
is not canceled when you turn off the
system except for MP3 audio tracks and
JPEG image files.
1 While playing a disc, press   to
stop playback.
“Resume” appears in the display.
2 Press  .
The system starts playback from the
point you stopped the disc in step 1.
To play
press 
(DVD
This sy
you sto
for up
when y
you sto
41st di
the fir
To act
DISC
to “ON
Note
If “MU
system
such as
point fo
Notes
 You cannot perform Resume Play during
Shuffle Play or Program Play.
 This function may not work properly with
some discs.
 Resume Play is canceled when
 you press   when playback is stopped.
 you eject the disc.
 you change the function.
 you change the settings in the Setup
Menu.
26GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
y

is
 Depending on where you stopped the disc,
the system may not resume playback from
the exact same point.
 If “MULTI-DISC RESUME” is set to “ON”,
Resume Play is not canceled for DVD
VIDEO and VIDEO CD when you eject the
disc or change the function.
Using play mode
Creating your own program
 Program Play

nt you
here
ume
Play
he
and
 to
To play back from the beginning of the disc,
press   twice, then press  .
Resuming playback of a disc that was
stopped  Multi-disc Resume
(DVD VIDEO and VIDEO CD only)
This system can store the point where
you stopped the playback of the disc
for up to 40 discs and resumes playback
when you insert the same disc again. If
you store a playback resume point for the
41st disc, the playback resume point for
the first disc will be deleted.
To activate this function, set “MULTIDISC RESUME” in “CUSTOM SETUP”
to “ON” (page 47).
Note
the
p 1.
If “MULTI-DISC RESUME” is set to “ON”, the
system may play back the next recorded disc
such as a DVD-RW from the playback resume
point for the current recorded disc.
You can make a program of up to 99
steps in the order you want them to be
played back.
You can only program the tracks from
the current disc.
Press
Press  or   repeatedly to
select
(PROGRAM), then
press ENTER .
Disc
Tip
track.
reens,
DISPLAY .
The Control Menu appears on the TV
screen.
The options for “PROGRAM” appear
on the TV screen.
Press  or   repeatedly
to select “SET”, then press
ENTER .
ng
with
opped.
Tracks number
Continued
CMT-DH7BT.GB.3-097-195-11(1)

27GB
4
Press  .
The cursor moves to the track row
“T” (in this case, “01”).
To program other tracks, repeat
steps 4 to 5.
Press  .
Program Play starts.
When the Program Play ends, you
can restart the same program by
pressing  .
To cancel Program Play
To change a programmed step:
Press  or   repeatedly to select
the programmed step number you
want to change. Then, press  .
To delete a programmed step:
Press  or   repeatedly to select
the programmed step number
you want to change. Then, press
CLEAR .
To delete all of the programmed
steps in the program list:
Press   to select “ALL CLEAR”.
Then, press ENTER .
Select the track you want to
program.
For example, select track “02”.
Press  or   repeatedly to
select “02” under “T”, then press
ENTER .
Selected track
Press CLEAR  or select “OFF” in
step 3. To play back the same program
again, select “ON” in step 3 and press
ENTER  or  .
Play
 Sh
You ca
curren
you pe
order
Shuffle
tracks
Th
scr
To turn off the Control Menu
Press DISPLAY  repeatedly until
the Control Menu disappears from the
TV screen.
Notes
 When Program Play is activated, the
“REPEAT” setting is automatically changed
to “ON” if the current setting is “DISC” or
“TRACK”.
 You cannot perform Program Play with
VIDEO CDs during PBC playback.
Tip
The Program Play is canceled and the program
list is cleared when
 you eject the disc.
 you turn off the system.
 you change the function.
Pre
pla
Pre
se
pr
Th
on
Pre
se
Wh
AU
T
Wh
O
Wh
O
Total time of the programmed tracks
28GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
peat
Playing in random order
Shuffle Play starts.
To cancel Shuffle Play, press
CLEAR  or select “OFF” in step 3.
 Shuffle Play
ou
Press DISPLAY  during
playback.
The Control Menu appears on the TV
screen.
ntil
the
nged
” or
ogram
Press  or   repeatedly to
select
(SHUFFLE), then
press ENTER .
To turn off the Control Menu
Press DISPLAY  repeatedly until
the Control Menu disappears from the
TV screen.
Disc
am
ss
You can play back the tracks on the
current disc in random order. Each time
you perform Shuffle Play, the playing
order may differs.
Shuffle Play is only available for the
tracks on the current disc.
Press ENTER .
Notes
 Shuffle Play is canceled when
 you eject the disc.
 you turn off the system.
 you change the function.
 you perform Track/Index Search.
 You cannot perform Shuffle Play with
VIDEO CDs during PBC playback.
 The same song may be played back
repeatedly for MP3 audio tracks.
The options for “SHUFFLE” appear
on the TV screen.
Press  or   repeatedly to
select the setting you want.
When playing a VIDEO CD or
AUDIO CD:
 TRACK: all tracks on the current
disc is played back randomly.
When Program Play is activated:
 ON: all tracks in the program list is
played back randomly.
When playing a DATA CD/DVD:
 ON: all MP3 audio tracks in the
selected album on the current disc
is played back randomly.
When no album is selected, the first
album is played back randomly.
Playing repeatedly
 Repeat Play
You can play back all the titles, tracks,
files or a single title, chapter, track or file
on a disc repeatedly.
You can select Shuffle Play and Program
Play at the same time.
DISPLAY .
The Control Menu appears on the TV
screen.
Press
Continued
CMT-DH7BT.GB.3-097-195-11(1)

29GB
2
Press  or   repeatedly to
select
(REPEAT), then
press ENTER .
The options for “REPEAT” appear on
the TV screen.
Press  or   repeatedly to
select the setting you want.
 OFF (default setting)
 DISC
 TITLE (DVD VIDEO or DVDR/-RW in VR mode)
 CHAPTER (DVD VIDEO or DVDR/-RW in VR mode)
 TRACK1) (AUDIO CD, VIDEO
CD, DATA CD/DVD2))
 ALBUM (DATA CD/DVD)
 ON (Shuffle Play or Program Play).
Press ENTER .
Repeat Play starts.
To cancel Repeat Play, press
CLEAR  or select “OFF” in step 3.
1)
2)
You cannot select “TRACK” when “MODE
(MP3, JPEG)” is set to “IMAGE (JPEG)”.
MP3 audio tracks only.
To turn off the Control Menu
Press DISPLAY  repeatedly until
the Control Menu disappears from the
TV screen.
Notes
 You can also change the Repeat Play setting
by pressing REPEAT  repeatedly.
 “REP” lights up in the display when Repeat
Play is set to “DISC”, “ALBUM” or “ON”.
 “REP1” lights up in the display when
Repeat Play is set to “ TITLE”, “CHAPTER”,
“TRACK” or “FILE”.
 Depending on the DVD VIDEO, you cannot
perform Repeat Play.
 You cannot perform Repeat Play with
VIDEO CDs during PBC playback.
 When playing a DATA CD/DVD which
contains MP3 audio tracks and JPEG image
files, the audio sound will not match the
image if their playing time are different.
 You cannot select “TRACK” when “MODE
(MP3, JPEG)” is set to “IMAGE (JPEG)”
(page36).
 Repeat Play is canceled when
 you eject the disc.
 you turn off the system.
 you change the function.
Sea
disc
Play
men
Some
you en
play b
menus
Using
A DVD
of pict
When
which
select
MENU
Using
Some
the dis
you pl
can se
the sub
sound
Pre
DV
Th
Th
dep
Pre
or
se
to
Pre
30GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
tting
epeat
N”.
TER”,
mage
he
t.
ODE
)”
Playing DVD VIDEOs using the
menu
Some DVD VIDEOs have menus to help
you enjoy the DVD VIDEOs. You can
play back DVD VIDEOs using these
menus on the TV screen.
Using DVD TOP MENU
A DVD VIDEO contains a lot of sections
of picture or music feature called “title”.
When you play back a DVD VIDEO
which contains several titles, you can
select the title you want using DVD TOP
MENU.
Selecting “ ORIGINAL” or “PLAY
LIST” on a DVD-R/-RW in VR
mode
This function is only available for DVDRs/-RWs in VR mode with a playlist
created.
Press DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
Press  or   repeatedly to
select
(ORIGINAL/PLAY
LIST), then press ENTER .
The options for “ORIGINAL/PLAY
LIST” appear on the TV screen.
Using DVD MENU
Some DVD VIDEOs allow you to select
the disc contents using a menu. When
you play back these DVD VIDEOs, you
can select items such as the language for
the subtitles and the language for the
sound using MENU.
Disc
cannot
Searching/selecting a
disc
Press  or   repeatedly to
select the setting you want.
 PLAY LIST: play back according to
the playlist created on the disc.
 ORIGINAL: play back according to
the originally recorded sequence.
Press ENTER .
Press DVD TOP MENU  or
DVD/TUNER MENU .
The menu appears on the TV screen.
The contents of the menu vary
depending on the disc.
Press  and  or  and  
or the numeric buttons  to
select the title or item you want
to play back.
Press ENTER .
Continued
CMT-DH7BT.GB.3-097-195-11(1)

31GB
Using the on-screen display
to search for a title/chapter/
scene/track/index/album/file
Select the title, track, album,
etc. or file number (/  or
numeric buttons ).
DISPLAY . (When
Press
playing a DATA CD/DVD
with JPEG image files, press
DISPLAY  twice.)
Press ENTER .
Press
DISPLAY  repeatedly.
Tip
When the Control Menu display is turned off,
you can search for a chapter (DVD VIDEO and
DVD-R/-RW in VR mode) or track (AUDIO
CD and VIDEO CD) by pressing the numeric
buttons  and ENTER .
Select the search item (/ ).
1 Press
Example: when you select
(CHAPTER)
“** (**)” is selected (** refers to a
number). The number in parentheses
indicates the total number of titles,
chapters, tracks, indexes, scenes,
albums or files.
2 Press  or   repeatedly to select
Press ENTER .
“** (**)” change to “– – (**)”.
Pre
Th
titl
mo
“
the
To search for a particular point using
the time code  Time Search
(DVD VIDEO and DVD-R/-RW in VR
mode only)
Pre
rep
fo
C
T
T
To turn off the Control Menu
DISPLAY .
(TIME/TEXT).
“T **:**:**” (elapsed playing time of
the current title) is selected.
3 Press ENTER .
“T **:**:**” changes to “T--:--:--”.
4 Input the time code using the
The system starts playback from the
selected title, track, album, etc.
The Control Menu appears on the TV
screen.
Selected row
 Pic
If you make a mistake, press
CLEAR  to cancel the number.
You can search by different information
recorded on a disc, such as title, track,
and album. Each item is assigned a
unique number on the disc, and you can
select the numbered item you want from
the Control Menu. You can also search
for a particular point using the time code
(Time Search) (DVD VIDEO and DVDR/-RW in VR mode only).
Sear
numeric buttons , then press
ENTER .
For example, to find the scene at 2
hours, 10 minutes, and 20 seconds
after the beginning, enter “2:10:20”.
If you make a mistake, press
CLEAR  to cancel the number.
Pre
ch
EN
Th
sel
To can
Press R
Note
Depending on the disc, you cannot perform
Time Search.
32GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
m,
or
Note
Searching by scene
 Picture Navigation
Depending on the disc, you may not be able to
select some items.
Tip
r.
d off,
EO and
DIO
meric
Disc
the
Press PICTURE NAVI 
repeatedly to select the VIEWER
format you want to search in.
To display the remaining chapters, titles, or
tracks, select a scene at the bottom row and
press  . To return to the previous scene,
select a scene at the top row and press  .
 CHAPTER VIEWER (DVD
VIDEO)
 TITLE VIEWER (DVD VIDEO)
 TRACK VIEWER (VIDEO CD or
Super VCD)
Press ENTER .
The first scene of the first 9 chapters,
titles or tracks appears. If there are
more than 9 chapters, titles, or tracks,
“” appears at the bottom right of
the screen.
sing
VR
lect
e of
”.
ds
0”.
Press ///  to select a
chapter, title or track, then press
ENTER .
The system starts playing from the
selected scene.
To cancel searching
Press RETURN  or
DISPLAY .
orm
33GB
CMT-DH7BT.GB.3-097-195-11(1)
Playing MP3/JPEG discs
Notes
 Depending on the software you use to create
the DATA CD or DATA DVD, the playback
order may differ.
 The playback order above may not be
applicable if there are more than 200 albums
and 300 tracks/files in each album.
 The system can play back up to 200 albums,
including albums that do not contain MP3
audio tracks and JPEG image files. The
system will not play back any albums beyond
the 200th album.
 The maximum number of MP3 audio tracks
or JPEG image files on an album which this
system can recognize is:
 600 when “MODE (MP3, JPEG)” is set to
“AUDIO (MP3)” or “IMAGE (JPEG)”.
 300 when “MODE (MP3, JPEG)” is set to
“AUTO”.
 The system can play back MP3 audio tracks
and JPEG image files. The system will play
back any data with the extension “.MP3”,
“.JPG” or “.JPEG” even if they are not in
MP3 or JPEG format. Playing this data may
generate a loud noise which could damage
your speaker system.
 Depending on the encoding/writing software,
recording device, or the recording media
used to record an MP3 audio track, you may
encounter problems such as cannot play
back, sound interruptions and noise.
 The following discs/situations can increase
the time it takes to start playback:
 a disc recorded with a complicated tree
structure.
 a disc recorded in Multi Session.
 a disc to which data can be added (nonfinalized disc).
 when the tracks or files in another album
have just been played back.
 Some CD-Rs/-RWs or DVD-Rs/-RWs/+Rs/
+RWs cannot be played back on the system
depending on the file format.
 When playing a DATA CD or DATA DVD
containing both MP3 audio tracks and JPEG
image files, select “MODE (MP3, JPEG)”
from the Control Menu after the disc’s TOC
reading is complete. If you want to play back
 both MP3 audio tracks and JPEG image
files, set “MODE (MP3, JPEG)” to
“AUTO”.
 MP3 audio tracks only, set “MODE (MP3,
JPEG)” to “AUDIO (MP3)”.
 JPEG image files only, set “MODE (MP3,
JPEG)” to “IMAGE (JPEG)”.
 The system can play back to a depth of 8
folders only.
Sele
or a
Ins
Th
Pre
se
Pla
Pre
Th
firs
Pla
34GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
ease
tree
non-
Selecting an MP3 audio track
or album
Insert a disc in the disc slot.
The list of albums appears.
album
MP3,
To play back the next album of MP3
audio tracks
Press  or   repeatedly to
select an album.
Playing an album:
Press  .
The system starts playback from the
first track of the selected album.
Playing a track:
1 Press ENTER .
The list of MP3 audio tracks of the
selected album appears.
Disc
(MP3,
Press  or   repeatedly when the
track list or album list is displayed.
You can select the next album by pressing
  repeatedly until the last track of
the current album, then press  
once. The first track of the next album
is selected. However, you cannot select
the previous album by pressing  
repeatedly. To select the previous album,
select the album from the album list.
/+Rs/
stem
DVD
JPEG
G)”
TOC
y back
mage
To display the next or previous page of
track list or album list
To return to the album list display
when the track list is displayed
Press RETURN .
To turn on or off the display of album
list or track list
Press DVD/TUNER MENU 
repeatedly.
Selecting a JPEG image file or
album
Insert a disc in the disc slot.
The list of albums appears on the TV
screen.
2 Press  or   repeatedly to
select the MP3 audio track you
want, then press ENTER .
The system starts playing the
selected MP3 audio track.
Press  or   repeatedly to
select an album.
Playing an album:
Press  .
The system starts a slide show from
the first image file of the selected
album.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

35GB
Playing an image file:
1 Press PICTURE NAVI .
Thumbnail picture for the first 16
JPEG image files in the selected
album is displayed.
To play back the next album of JPEG
image files
You can select the next album by pressing
  repeatedly until the last file of the
current album, then press   once.
The first file of the next album is selected.
However, you cannot select the previous
album by pressing   repeatedly. To
select the previous album, select the
album from the album list.
To turn on or off the display of album
list
If there are more than 16 image
files in the selected album, the
scroll bar appears at the right.
2 Press ///  to select the
image you want to view, then
press  .
The slide show starts from the
selected image file.
Play
JPEG
show
You ca
sound
files an
album
Th
scr
Press DVD/TUNER MENU 
repeatedly.
To rotate a JPEG image file
When a JPEG image file is displayed on
the TV screen, you can rotate the image
by 90 degrees.
Press  or   repeatedly while viewing
an image.
Press CLEAR  to return to the original
view.
To display the next or previous page of
album list
Press  or   repeatedly during the
slide show.
Pre
se
JP
Th
JPE
A
A
I
Pre
to
EN
Pre
Press  or   repeatedly when the
album list is displayed.
To display the next or previous JPEG
image file
Pre
Th
scr
Notes
 The PICTURE NAVI  button does not
work when “MODE (MP3, JPEG)” is set to
“AUDIO (MP3)”.
 When you press  or   to select the next
or previous image, the image will return to
its original view even if you have rotated the
image previously.
 The slide show stops when you press  or
 .
Ins
Th
scr
36GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
EG
bum
You can play back a slide show with
sound by first placing both JPEG image
files and MP3 audio tracks in the same
album on a DATA CD/DVD.
Insert a disc in the disc slot.
The list of albums appears on the TV
screen.
d on
mage
ewing
iginal
DISPLAY .
The Control Menu appears on the TV
screen.
Press
Press  or   repeatedly to
select
(MODE (MP3,
JPEG)), then press ENTER .
The options for “MODE (MP3,
JPEG)” appear on the TV screen.
 AUTO: (default setting) Play back
both JPEG image files and MP3
audio tracks in the same album as a
slide show with sound.
 AUDIO (MP3): Play back MP3
audio tracks continuously.
 IMAGE (JPEG): Play back JPEG
image files as a slide show.
ot
et to
e next
n to
ed the
or
Press  or   repeatedly
to select “AUTO”, then press
ENTER .
Press DVD/TUNER MENU .
Press  or   repeatedly to
select the album you want, then
press  .
The slide show with sound starts from
the selected album.
To turn on or off the display of album
list
Press DVD/TUNER MENU 
repeatedly.
Disc
essing
the
e.
ected.
vious
To
Playing MP3 audio tracks and
JPEG image files as a slide
show with sound
To cancel slide show with sound
Select “AUDIO (MP3)” or “IMAGE
(JPEG)” in step 4.
Notes
 In some cases, you cannot change the
“MODE (MP3, JPEG)” setting when “MODE
(MP3, JPEG)” has been set to
 “IMAGE (JPEG)” and the selected disc
only contains MP3 audio tracks.
 “AUDIO (MP3)” and the selected disc
only contains JPEG image files.
 The maximum number of MP3 audio tracks
or JPEG image files on an album which this
system can recognize is:
 600 when “MODE (MP3, JPEG)” is set to
“AUDIO (MP3)” or “IMAGE (JPEG)”.
 300 when “MODE (MP3, JPEG)” is set to
“AUTO”.
 If there are no MP3 audio tracks in the disc,
“No audio data” appears on the TV screen
and the disc cannot be played back.
 If there are no JPEG image files in the disc,
“No image data” appears on the TV screen
and the disc cannot be played back.
 If you play back a large data size of MP3
audio tracks and JPEG image files at the same
time, the sound may skip.
The list of albums appears on the TV
screen.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

37GB
Specifying the slide show speed
(JPEG image files only)
DISPLAY  repeatedly until
the Control Menu for JPEG image
files appears on the TV screen.
1 Press
2 Press  or   repeatedly to select
(INTERVAL), then press
ENTER .
The options for “INTERVAL” appear
on the TV screen.
3 Press  or   repeatedly to select
the transition interval you want.
The intervals become longer in the
order from “FAST”, “NORMAL”
(default setting), “SLOW 1”, to
“SLOW 2”.
3 Press  or   repeatedly to select
the setting you want.
 MODE 1: (default setting) The
image sweeps in from top to
bottom of the screen.
 MODE 2: The image sweeps in
from left to right of the screen.
 MODE 3: The image stretches out
from the center of the screen.
 MODE 4: The images randomly
cycle through the effects.
 MODE 5: The next image slides
over the current image.
 OFF: Turns off this function.
4 Press ENTER .
The selected setting takes effect.
Adju
betw
and
 A/V
When
with th
adjust
sound
A/V SY
tracks
CD/D
4 Press ENTER .
Th
scr
The selected setting takes effect.
Note
Some JPEG image files (especially progressive
JPEG image files or JPEG image files with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
Selecting a transition effect for image
files in the slide show
(EFFECT), then press
ENTER .
The options for “EFFECT” appear on
the TV screen.
Pre
se
O
O
1 Press
2 Press  or   repeatedly to select
Pre
se
pr
Th
on
(JPEG image files only)
DISPLAY  repeatedly until
the Control Menu for JPEG image
files appears on the TV screen.
Pre
pla
Pre
Note
Depend
may no
38GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
lect
mly
es
 A/V SYNC
When the sound does not synchronize
with the pictures on the screen, you can
adjust the delay between the picture and
sound.
A/V SYNC does not work for MP3 audio
tracks and JPEG image files in DATA
CD/DVD.
Press DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
Press  or   repeatedly to
select
(A/V SYNC), then
press ENTER .
The options for “A/V SYNC” appear
on the TV screen.
Press  or   repeatedly to
select the setting you want.
 OFF: (default setting) Does not
adjust.
 ON: Adjusts the difference between
picture and sound.
Press ENTER .
Note
Depending on the input stream, this function
may not be effective.
Restricting playback of
the disc
 CUSTOM PARENTAL CONTROL,
PARENTAL CONTROL
Disc
n.
out
Adjusting the delay
between the picture
and sound
You can set 2 kinds of playback
restrictions for the disc you want.
Custom Parental Control
You can set playback restrictions so
that the system will not play back
inappropriate discs.
Parental Control
You can limit the playback of some DVD
VIDEOs according to a predetermined
level such as the age of the users. When
a limited scene is played back, that scene
may be skipped or replaced with different
scenes.
The same password is used for both
Custom Parental Control and Parental
Control.
Preventing playback of specific
discs
 CUSTOM PARENTAL CONTROL
You can set the same Custom Parental
Control password for up to 40 discs.
When you set the 41st-disc, the playback
restriction for the first disc is canceled.
Insert the disc you want to set
the playback restriction.
If the disc is playing, press   to
stop playback.
Press DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

39GB
3
Press  or   repeatedly
to select
(PARENTAL
CONTROL), then press ENTER .
The options for “PARENTAL
CONTROL” appear on the TV screen.
Press  or   repeatedly
to select “ON ”, then press
ENTER .
To turn off the Custom Parental
Control function, select
“OFF ”, then press ENTER .
If you make a mistake when entering
your password
Press   repeatedly to delete the
number you have entered, then re-enter
your password again.
To play back a disc for which Custom
Parental Control is set
1 Insert the disc for which Custom
Lim
 PA
(DVD
You ca
VIDEO
level s
Parental Control is set.
The “CUSTOM PARENTAL
CONTROL” display appears.
Th
scr
If you have not entered a
password:
The display for registering a new
password appears.
2 Enter your 4-digit password using
Pre
se
EN
Tip
If y
pa
Th
pa
the numeric buttons , then press
ENTER .
The system is ready for playback.
When you have already registered
a password:
The display for entering the password
appears on the TV screen.
Enter or re-enter your 4-digit
password using the numeric
buttons , then press
ENTER .
“Custom parental control is set.”
appears on the TV screen and the
screen returns to the Control Menu.
Pre
to
CO
Th
CO
Enter a 4-digit password using the
numeric buttons , then press
ENTER .
The display for confirming the
password appears on the TV screen.
Pre
pla
If you forget your password, enter the 6digit number “199703” using the numeric
buttons  when the “CUSTOM PARENTAL
CONTROL” display asks you for your
password, then press ENTER . The display
will ask you to enter a new 4-digit password.
En
nu
EN
Th
pa
Wh
ap
Th
app
40GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
ring
Limiting playback for children
 PARENTAL CONTROL
nter
om
The display for setting the playback
limitation level appears.
Disc
(DVD VIDEO only)
You can limit the playback of some DVD
VIDEOs according to a predetermined
level such as the age of the users.
Enter or re-enter your 4-digit
password using the numeric
buttons , then press
ENTER .
Press DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
Press  or   repeatedly
to select
(PARENTAL
CONTROL), then press ENTER .
The options for “PARENTAL
CONTROL” appear on the TV screen.
ng
ress
Press  or   repeatedly to
select “PLAYER ”, then press
ENTER .
The options for “STANDARD” appear
on the TV screen.
If you have not entered a
password:
The display for registering a new
password appears.
Press  or   repeatedly to
select a geographic area as the
playback limitation level, then
press ENTER .
The area is selected.
When you select “OTHERS ”, enter
the area code for the geographic area
you want according to the “Parental
Control Area Code List” on page 43
by using the numeric buttons .
NTAL
splay
ord.
Enter a 4-digit password using the
numeric buttons , then press
ENTER .
The display for confirming the
password appears on the TV screen.
Press  or   repeatedly to
select “STANDARD”, then press
ENTER .
Press  or   repeatedly
to select “LEVEL”, then press
ENTER .
The options for “LEVEL” appear on
the TV screen.
When you have already registered
a password:
The display for entering the password
appears on the TV screen.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

41GB
8
Press  or   repeatedly to
select the level you want, then
press ENTER .
Parental Control setting is completed.
The lower the value, the stricter the
limitation.
To turn off the Parental Control
function, set “LEVEL” to “OFF”.
Tip
If you forget your password, remove the disc
and repeat steps 1 to 3 of “Limiting playback
for children”. When you are asked to enter your
password, enter “199703” using the numeric
buttons , then press ENTER . The display
will ask you to enter a new 4-digit password.
After you enter a new 4-digit password, reinsert
the disc and press  . When the display
for entering your password appears, enter your
new password.
If you make a mistake when entering
your password
Press   repeatedly to delete the
number you have entered, then re-enter
your password again.
Changing the password
To play back a disc for which Parental
Control is set
1 Insert the disc and press  .
The display for entering your password
appears on the TV screen.
Notes
 The Control Menu display will show different
items depending on the disc type.
 When you play back DVD VIDEOs which
do not have the Parental Control function,
playback cannot be limited on this system.
 Depending on the DVD VIDEO, you may
be asked to change the parental control level
while playing the disc. In this case, enter your
password, then change the level. If Resume
Play is canceled, the level returns to the
original level.
En
us
th
To
rebu
EN
If you
your p
Press 
numbe
your p
The Control Menu appears on the TV
screen.
2 Enter your 4-digit password using
the numeric buttons , then press
ENTER .
The system starts playback.
Press DISPLAY  when
playback is stopped.
Press  or   repeatedly
to select
(PARENTAL
CONTROL), then press ENTER .
The options for “PARENTAL
CONTROL” appear on the TV screen.
Press  or   repeatedly to
select “PASSWORD ”, then
press ENTER .
The display for entering the password
appears on the TV screen.
Enter your 4-digit password
using the numeric buttons ,
then press ENTER .
42GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
5
Enter a new 4-digit password
using the numeric buttons ,
then press ENTER .
To confirm your password,
re-enter it using the numeric
buttons , then press
ENTER .
If you make a mistake when entering
your password
Press   repeatedly to delete the
number you have entered, then re-enter
your password again.
Using the DVD setup
menu
By using the DVD setup menu, you can
make various adjustments to items such
as picture and sound.
Note
Playback settings stored in the disc take
priority over the DVD setup menu settings.
Therefore, some of the DVD setup menu
settings may not be performed.
Disc
disc
back
er your
eric
isplay
ord.
reinsert
play
r your
Press DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
he TV
ER .
Press  or   repeatedly to
select
(SETUP), then
press ENTER .
The options for “SETUP” appear on
the TV screen.
creen.
to
Press  or   repeatedly to
select “CUSTOM”, then press
ENTER .
The Setup menu appears on the TV
screen.
sword
,
Continued
CMT-DH7BT.GB.3-097-195-11(1)

43GB
4
Press  or   repeatedly
to select the setup item from
the displayed list: “LANGUAGE
SETUP”, “SCREEN SETUP” or
“CUSTOM SETUP”. Then press
ENTER .
Press  or   repeatedly to
select the setting you want,
then press ENTER .
The setting is selected and setup is
completed.
The setup item is selected.
Example: SCREEN SETUP
* When
Selected item
Selected setting
DVD setup menu item list
Setup items
SUBTI
(DVD
langua
When
the lan
accord
for the
Press  or   repeatedly to
select the item you want, then
press ENTER .
The default settings are underlined.
The options for the selected item
appear on the TV screen.
Example: TV TYPE
Set various languages for the on-screen
display or sound track.
Options
“SUB
recor
recor
Howe
langu
If you
“SUB
code
using
Settin
Choos
you co
Setting the language  LANGUAGE
SETUP
OSD
(On-Screen Display) Switches the
language of the on-screen display.
MENU*
(DVD VIDEO only) Select the language
for the DVD menu.
AUDIO*
(DVD VIDEO only) Switches the
language of the sound track.
When you select “ORIGINAL”, the
language given priority in the disc is
selected.
TV TY
(DVD
16:9: S
wide-s
mode
4:3 LE
conne
display
upper
4:3 PA
conne
display
screen
not fit
44GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
to
is
SUBTITLE*
(DVD VIDEO only) Switches the
language of the subtitle .
When you select “AUDIO FOLLOW”,
the language for the subtitles changes
according to the language you selected
for the sound track.
“SUBTITLE”, or “AUDIO” that is not
recorded on the DVD VIDEO, one of the
recorded language is automatically selected.
However, depending on the disc, the
language may not be selected automatically.
If you select “OTHERS ” in “MENU”,
“SUBTITLE”, and “AUDIO”, enter a language
code from the “Language code list” (page 97)
using the numeric buttons .
Setting the TV screen  SCREEN SETUP
Choose the settings according to the TV
you connected.
GE
een
uage
TV TYPE1)
(DVD VIDEO only)
16:9: Select this when you connect a
wide-screen TV or a TV with a wide
mode function.
4:3 LETTER BOX: Select this when you
connect a 4:3 screen TV. This setting
displays a wide picture with bands on the
upper and lower portions of the screen.
4:3 PAN SCAN2): Select this when you
connect a 4:3 screen TV. This setting
displays the wide picture on the entire
screen and cuts off the portions that do
not fit.
Disc
* When you select a language in “MENU”,
SCREEN SAVER
The screen saver will help prevent your
display device from becoming damaged
(ghosting). Press   to turn off the
screen saver.
ON: The screen saver image appears
when playback is stopped or paused for
15 minutes or when you play back an
AUDIO CD or MP3 audio tracks for
more than 15 minutes.
OFF
BACKGROUND
Selects the background color or picture
to be displayed on the TV screen. The
background color or picture is displayed
when playback is stopped or while
playing an AUDIO CD and MP3 audio
tracks.
JACKET PICTURE: The jacket picture
(still picture) appears in the background,
but only when the jacket picture is
already recorded on the disc (DVD
VIDEO, CD-EXTRA, etc.). If the disc
does not contain a jacket picture, the
“GRAPHICS” picture appears.
GRAPHICS: A preset picture stored in
the system appears in the background.
BLUE
BLACK
BLACK LEVEL
Select the black level (setup level) for the
video signals output from the video jacks
other than COMPONENT VIDEO OUT
jacks.
ON: Standard level
OFF: Lower the standard black level. Use
this when the picture becomes too white.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

45GB
BLACK LEVEL (COMPONENT OUT)
Select the black level (setup level)
for the video signals output from the
COMPONENT VIDEO OUT jacks.
You cannot select “BLACK LEVEL
(COMPONENT OUT)” when the system
outputs progressive signal.
OFF: Standard level
ON: Raise the standard black level. Use
this when the picture becomes too black.
4:3 OUTPUT3)
Change this setting to watch 4:3
aspect ratio progressive signals. If
you can change the aspect ratio on
your progressive format (525p/625p)
compatible TV, change the setting on
your TV.
FULL: Select this when you can change
the aspect ratio on your TV.
NORMAL: Select this when you cannot
change the aspect ratio on your TV.
Shows a 16:9 aspect ratio signal with
black bands on left and right sides of the
image.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
2)
3)
Depending on the DVD VIDEO, “4:3
LETTER BOX” may be selected automatically
instead of “4:3 PAN SCAN” or vice versa.
This setting is effective only when
 you set “TV TYPE” in “SCREEN SETUP”
to “16:9”.
 “P AUTO” or “P VIDEO” is selected (page
13).
Setting playback options  CUSTOM
SETUP
MULT
(DVD
ON: S
OFF: D
point i
the res
curren
AUDIO
Comp
(DVD
mode
OFF: N
STAN
track w
the rec
for wa
at nigh
MAX:
1)
16:9 aspect ratio TV
1)
TRAC
(DVD
sound
numbe
a DVD
(PCM
Digita
OFF: N
AUTO
The default setting varies depending on the
country.
PAUSE MODE
(DVD VIDEO and DVD-R/-RW in VR
mode only)
AUTO: The picture, including subjects
that move dynamically, is output with no
jitter. Normally select this position.
FRAME: The picture, including subjects
that do not move dynamically, is output
in high resolution.
If eac
numb
audio
DTS,
2)
When
“AUT
“TRA
prior
“LAN
depen
be pe
3)
AUD
Dolb
46GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Disc
TRACK SELECTION
(DVD VIDEO only) Gives priority to the
sound track which contains the highest
number of channels when you play back
a DVD VIDEO on which multiple audio
(PCM, DTS, MPEG audio, or Dolby
Digital) formats1) are recorded.
OFF: No priority given.
AUTO2): Priority given.
MULTI-DISC RESUME
(DVD VIDEO and VIDEO CD only)
ON: See page 23.
OFF: Does not store the resume playback
point in the memory. Playback starts at
the resume playback point only for the
current disc in the system.
atically
sa.
ETUP”
d (page
OM
AUDIO DRC3) (Dynamic Range
Compression)
(DVD VIDEO and DVD-R/-RW in VR
mode only)
OFF: No compression of dynamic range.
STANDARD: Reproduces the sound
track with the kind of dynamic range that
the recording engineer intended. Useful
for watching movies at low volume late
at night.
MAX: Narrows the dynamic range fully.
1)
VR
ects
th no
If each audio sound track has the same
number of channels, the system selects the
audio sound tracks in the order from PCM,
DTS, Dolby Digital, to MPEG.
2)
When you set “TRACK SELECTION” to
“AUTO”, the language may change. The
“TRACK SELECTION” setting has higher
priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 44). However,
depending on the disc, this function may not
be performed.
3)
AUDIO DRC can only be performed with
Dolby Digital sources.
bjects
tput
47GB
CMT-DH7BT.GB.3-097-195-11(1)
1 Press FUNCTION +/  repeatedly
to select “TUNER FM” or “TUNER AM”
(or press TUNER/BAND  on the unit
repeatedly to select “FM” or “AM”).
Tuner
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually
tuning in the station.
Press /  to turn off the system.
Press FUNCTION +/ 
repeatedly to select “TUNER FM”
or “TUNER AM” (or press TUNER/
BAND  on the unit repeatedly
to select “FM” or “AM”).
Press and hold TUNING +/ 
until the frequency indication
changes and then release.
Scanning stops automatically when
a station is tuned in and “TUNED”
lights up in the display. When a FM
stereo program is tuned in, “ST”
lights up in the display.
If “TUNED’ does not appear and
the scanning does not stop, press
TUNING +/  repeatedly to tune
in the station you want.
To change the AM tuning interval
The factory setting for AM tuning
interval is 9 kHz (or 10 kHz for same
areas).
Pre
Ad
Pre
To sele
4 Hold down TUNER/BAND  and
1 Pre
then press /  to turn on the
system.
“AM 9k Step” or “AM 10k Step”
appears in the display.
When you change the interval, all the
AM preset stations are erased.
Tips
 To improve broadcast reception, adjust the
supplied antennas, or connect an external
antenna.
 When an FM stereo program has static noise,
press FM MODE repeatedly until “MONO”
lights up in the display. There will be no
stereo effect, but the reception will improve.
BAN
2 Pre
rep
3 Pre
4 Pre
To sele
butto
Enter
using t
ENTE
To che
numb
Listening to satellite radio
You can operate and listen to XM or
SIRIUS satellite radio by connecting an
optional antenna or tuner. Before using
the system, connect the XM Mini-Tuner
and Home Dock or the SiriusConnect
Home tuner to the system. See “Hooking
up the system securely” (page xx) for
details about connection.
To stop automatic scanning
Press  .
Tu
3 Press DISPLAY  to display the clock.
Listening to FM or AM
Press t
ENTE
Notes
 If you
butto
chang
 You c
TUN
for th
Select “XM” or “SIRIUS.”
Press XM or SIRIUS  (or TUNER/
BAND  repeatedly).
Select the All Channel mode.
Press CATEGORY MODE 
repeatedly until “CAT” disappear.
48GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
edly
AM”
e unit
”).
em.
Tune in the desired channel.
Adjust the volume.
Press TUNING +/  repeatedly.
Press VOLUME +/ .
clock.
To select a channel by Category mode
1 Press XM or SIRIUS  (or TUNER/
BAND  repeatedly).
repeatedly until “CAT” appears.
l the
Tune in the desired station (see
“Listening to the radio” (page
48)).
Press DVD/TUNER MENU .
“Memory?” flashes in the display.
A preset number flashes in the
display.
The stations are stored from preset
number 1.
3 Press CATEGORY +/  repeatedly.
4 Press TUNING +/  repeatedly.
t the
nal
c noise,
ONO”
prove.
To select a channel using the numeric
buttons
Enter the 3 digits of the desired channel
using the numeric buttons , then press
ENTER .
To check your XM Radio ID or SIRIUS ID
number
Press the numeric button 0 , then press
ENTER  to select the channel 0.
g an
sing
Tuner
ect
oking
or
Press ENTER .
Tuner
2 Press CATEGORY MODE 
Listening to preset radio
station
Notes
 If you select a channel using the numeric
buttons in Category mode, the tuning mode
changes to All Channel mode automatically.
 You cannot select a SIRIUS channel using
TUNING +/  if the Parental Lock is set
for the channel.
NER/
Preset number
Press PRESET +/  repeatedly
to select the preset number you
want.
Press ENTER .
“Complete!” appears in the display.
The station is stored.
Repeat steps 1 to 6 to store
other stations.
You can preset up to 20 FM, 10 AM,
20 XM and 20 SIRIUS stations.
The preset stations are retained for
half a day even if you unplug the
power cord or if a power failure
occurs.
e.
ar.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

49GB
7
To listen to a preset station,
press PRESET +/  repeatedly
to select the preset station you
want.
You can also press the numeric
buttons , then press ENTER  to
select a preset station.
“EnterKey” appears.
Notes on presetting XM or SIRIUS
stations
 You cannot preset XM or SIRIUS stations
except when you receive the station.
 You cannot operate CATEGORY +/–  in
preset tuning mode.
 It you select a channel using the numeric
buttons  in preset tuning mode, the tuning
mode changes automatically to All Channel
mode.
To delete the numbers you have
entered
Press CLEAR  repeatedly.
To change the password
1 Press SIRIUS  (or TUNER/BAND 
repeatedly) to select “SIRIUS.”
2 Press DVD/TUNER MENU .
Restricting access to specific
channels (SIRIUS only)
 Parental Lock
You can restrict access to certain
channels using your own password. The
password is set to “0000” as the default.
Change the password before you use
this function for the first time (see “To
change the password).
Select “SIRIUS.”
Tune in the desired channel
(see “Listening to satellite radio”
(page xx).
Press DVD/TUNER MENU .
Press SIRIUS  (or TUNER/BAND
 repeatedly).
Enter your 4-digit password
using the numeric buttons .
“Complete!” appears and the Parental
Lock is set.
To cancel presetting
Press DVD/TUNER MENU .
Press  or   repeatedly until
“Lock?” appears, then press
ENTER .
Press  or   repeatedly until “Edit
Key?” appears, then press ENTER .
“OLD Key” appears.
4 Enter your current 4-digit password
using the numeric buttons .
“NEW Key” appears.
5 Enter a new 4-digit password using
the numeric buttons .
6 To confirm your new password, reenter it using the numeric buttons
.
“Complete!” appears and the new
password is set.
To list
1 Pre
rep
2 Sele
liste
.
“En
3 Ent
the
To rem
1 Wh
in, p
the
“Un
2 Pre
“Co
is u
Notes
 When
TUN
Categ
 The d
indic
made
been
Notes
 When
settin
to the
settin
 You c
 If you
chann
chann
 You c
0 or 1
50GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
until
To listen to the locked channels
1 Press SIRIUS  (or TUNER/BAND 
repeatedly) to select “SIRIUS.”
2 Select a locked channel you want to
.
rental
listen to using the numeric buttons
.
“EnterKey” appears.
3 Enter your 4-digit password using
To remove the Parental Lock
Tuner
the numeric buttons .
1 When the locked channel is tuned
D
in, press DVD/TUNER MENU , and
then press  or   repeatedly until
“Unlock?” appears.
2 Press ENTER .
“Edit
R .
word
sing
“Complete!” appears and the channel
is unlocked.
Notes
 When you select a channel using
TUNING +/  in All Channel mode or
Category mode, locked channels are skipped.
 The display will return to the original
indication if you press   or if no entry is
made for a set period of time after you have
been prompted to enter the password.
Notes on SIRIUS Parental Lock
reons
 When the system is reset to the factory
settings, the Parental Lock password returns
to the default (“0000”), but Parental Lock
settings are not removed.
 You cannot preset locked channels.
 If you set the Parental Lock for a preset
channel, the preset information for that
channel returns to the default.
 You cannot set the Parental Lock for channels
0 or 184.
51GB
CMT-DH7BT.GB.3-097-195-11(1)
Bluetooth
Using the Bluetooth
function
This system supports Bluetooth A2DP
and AVRCP profiles. For details on
Bluetooth wireless technology, see
“Bluetooth wireless technology” (page
34).
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:

For customers in Canada:

For customers in Europe:

For customers in Latin America:

For customers in Asia and Oceania:

Listening to music of a
Bluetooth mobile phone or
Bluetooth device
You can listen to music from your
Bluetooth mobile phone or Bluetooth
device over a wireless connection.
Pairin
device
Pairin
device
before
to pair
device
perfor
perfor
compl
a Blue
Pla
co
1m
Se
Pre
to
Blu
Follow the procedure below to listen to
music from Bluetooth devices with this
system.
Pairing this system with a Bluetooth
device

Connecting to registered devices

Playing music of a Bluetooth device
For details about the operations of
the Bluetooth device, also refer to the
operation manual supplied with your
Bluetooth device.
Op
an
op
Fo
the
op
Blu
Wh
wit
the
Blu
on
Th
“C
Wh
thi
(A
dev
no
can
op
52GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Pairing this system with a Bluetooth
device
th
oth
ce
he
ur
Place the Bluetooth device to be
connected to this system within
1 meter of the system.
Select the Bluetooth function.
Operate the Bluetooth device
and perform the pairing
operation.
Press FUNCTION +/  repeatedly
to select “Bluetooth” (or press
Bluetooth   on the unit).
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
When searching for this system
with the Bluetooth device, a list of
the devices found may appear in the
Bluetooth device display depending
on the type of Bluetooth device.
This system appears as
“CMT-DH7BT.”
When establishing a connection with
this system, select the audio profile
(A2DP, AVRCP) at the Bluetooth
device. If the Bluetooth device does
not support the AVRCP profile, you
cannot perform playback or other
operations with the system (page 16).
Enter the passcode.
Passcode entry may be required
depending on the type of Bluetooth
device.
When “PIN?” and a countdown
appear, enter the passkey at the
system as follows:
Press the numeric buttons  (or
+/  and /  on
the unit) to enter the same passkey
that was entered at the Bluetooth
device, and then press ENTER  (or
BLUETOOTH OPR  on the unit).
Once pairing is completed and the
connection is established, the system
display changes as follows:
“Connect”  Name of the Bluetooth
device
To cancel passcode entry partway
Press  .
Notes
 “Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
 This system only supports numerical
passcodes up to 4 digits.
 The pairing standby status of the system is
cancelled after about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
 While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Continued
CMT-DH7BT.GB.3-097-195-11(1)
BLUETOOTH
n to
this
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
device. Once a pairing operation is
performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music of
a Bluetooth device” (page 16).

53GB
To erase all the pairing registration
information
1 Press FUNCTION +/  repeatedly
to select “BLUETOOTH” (or press
BLUETOOTH   on the unit).
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
and hold BLUETOOTH OPR  on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
2 Press CLEAR .
Playing music of a Bluetooth device
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP. If the system is not
connected with a Bluetooth device using
AVRCP, “Not In Use” appears when you
operate the system.
“Delete?” appears.
Select the Bluetooth function.
Press FUNCTION +/  repeatedly
to select “BLUETOOTH” (or press
BLUETOOTH   on the unit).
Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
Once the connection is established,
the system display changes as follows:
“Connect”  Name of the Bluetooth
device
3 Press ENTER .
“Complete!” appears and all the
pairing information is erased.
Note
In order to connect with a Bluetooth device
after performing this operation, you must enter
the passcode again.
Start playback.
Press   (or BLUETOOTH 
 on the unit).
Depending on the Bluetooth device,
you may need to start up the AV
software of the Bluetooth device
beforehand.
Adjust the volume.
Press VOLUME +/ .
To check the address of a connected
Bluetooth device
Press DISPLAY  while the Bluetooth
device name appears in the system
display.
The Bluetooth device address appears for
8 seconds.
To can
Blueto
Press a
on the
BLUET
Other
To
Pause
Stop p
Select
Find a
a file
View t
Blueto
device
Note
These o
certain
actual o
connec
Notes
device
 If you
Bluet
opera
Bluet
 Depe
you c
of the
 When
is pre
headp
a con
anoth
54GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
ice
by
oth
s not
using
you
To cancel the connection with a
Bluetooth device
Press and hold BLUETOOTH OPR 
on the unit for about 2 seconds until the
BLUETOOTH indicator  turns off.
Other operation
on.
atedly
ess
nit).
m the
hed,
llows:
tooth

vice,
ed
You can listen to music played on this
system using your Bluetooth headphones
over a wireless connection.
Press
 .
 .
/ .
Hold down /
.
DISPLAY  repeatedly
when the system is on.
BLUETOOTH
of
your
To
Pause playback
Stop playback
Select a file
Find a point in
a file
View the
Bluetooth
device address
Listening to music on this
system using Bluetooth
headphones
Note
These operations may not be available for
certain Bluetooth devices. In addition, the
actual operations may differ depending on the
connected Bluetooth device.
Notes on connections with Bluetooth
devices
 If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
 Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
 When BLUETOOTH   on the unit
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
Follow the procedure below to listen
to music on this system with Bluetooth
headphones.
Pairing this system with Bluetooth
headphones

Connecting to registered headphones

Playing music on this system
For details about the operations of the
Bluetooth headphones, also refer to the
operation manual supplied with your
Bluetooth headphones.
oth
ars for
Continued
CMT-DH7BT.GB.3-097-195-11(1)

55GB
Pairing this system with Bluetooth
headphones
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
headphones. Once a pairing operation
is performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music on
this system” (page 18).
Select a function other than the
Bluetooth function.
Press FUNCTION +/  repeatedly.
Place the Bluetooth
headphones to be connected
to this system within 1 meter of
the system.
Put the Bluetooth headphones
in pairing mode.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
Press and hold BLUETOOTH
OPR  on the unit for about 7
seconds until the BLUETOOTH
indicator  flashes.
Sound output from the speakers is
stopped.
To cancel passcode entry partway
Playin
Press  .
You ca
Blueto
system
AVRC
Notes
 “Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
 This system only supports numerical
passcodes up to 4 digits.
 The pairing standby status of the system is
cancelled after about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
 While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Pre

un
lig
If m
tha
is p
sys
to
(C
to
rec
att
est
On
the
“C
dev
1 Press FUNCTION +/  repeatedly
to select “BLUETOOTH” (or press
BLUETOOTH   on the unit).
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
and hold BLUETOOTH OPR  on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
“Delete?” appears.
3 Press ENTER .
Note
Follow the same procedure as in
step 4 of “Pairing this system with a
Bluetooth device” (page 14).
Once pairing is completed and the
connection is established, the system
display changes as follows:
“Connect”  Name of the Bluetooth
device
To connect with Bluetooth headphones after
performing this operation, you must enter the
passcode again.
Sta
th
De
hea
sys
etc
Fo
Blu
op
Blu
“Complete!” appears and all the
pairing information is erased.
Enter the passcode.
Es
Blu
Pre
To erase all the pairing registration
information
2 Press CLEAR .
Se
Blu
Ad
Pre
56GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
y
IN
c.
m is
ring is
m step
Playing music on this system
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
Select a function other than the
Bluetooth function.
Press FUNCTION +/  repeatedly.
, this
ection
Establish a connection with the
Bluetooth headphones.
on
edly
ith a
tooth
ress
on
ut the
de.
Press and hold BLUETOOTH OPR 
on the unit for about 2 seconds until the
BLUETOOTH indicator  turns off.
Notes
 If you cannot connect with paired Bluetooth
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
 When the system is changed to a function
other than Bluetooth function and
BLUETOOTH OPR  on the unit is pressed
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
 This system stores separate volume settings
for when listening through headphones
connected to the PHONES jack  on the
unit, or when listering through Bluetooth
headphones.
 This system stores separate volume settings
for when listening through the spakers
or PHONES jack  on the unit, or when
listering through Bluetooth headphones.
BLUETOOTH
Press and hold BLUETOOTH OPR
 on the unit for about 2 seconds
until the BLUETOOTH indicator 
lights up, then release the button.
If more than one Bluetooth device
that has been connected in the past
is present around the system, the
system attempts to connect with up
to 3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.)
Once the connection is established,
the system display changes as follows:
“Connect”  Name of the Bluetooth
device
To cancel the connection with
Bluetooth headphones
Start playback of the music for
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone’s controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
after
er the
Adjust the volume.
Press VOLUME +/ .
57GB
CMT-DH7BT.GB.3-097-195-11(1)
Sound Adjustment
Adjusting the sound
Generating a more dynamic
sound (Dynamic Sound
Generator X-tra)
You can reinforce the bass and create a
more powerful sound.
The DSGX setting is ideal for music
sources.
Press DSGX  on the unit
repeatedly.
Each time you press the button, the
display changes as follows:
DSGX ON  DSGX OFF
Tip
The default setting is “DSGX ON”.
Setting the sound effect
Press EQ  repeatedly to select
“BASS” or “TREBLE”.
Press PRESET +/  repeatedly
to adjust the level.
58GB
CMT-DH7BT.GB.3-097-195-11(1)
Other operations
Using the timer
Falling asleep to music
 Sleep Timer
You can set the system to turn off after a
certain time, so that you can fall asleep
to music.
Press SLEEP  repeatedly.
Other operations
To
Check the
remaining time
Change the
time to turn off
Cancel the
Sleep Timer
 Play Timer
You can wake up to music at a preset
time. Make sure you have set the clock
(see “Setting the clock” on page18).
Insert a disc you want to play back.
Then press VOLUME +/ .
Press TIMER MENU .
Press  or   repeatedly to
select “PLAY SET?”, then press
ENTER .
“ON” appears and the hour indication
flashes in the display.
Do this
Press SLEEP  once.
Press SLEEP 
repeatedly to select the
time you want.
Press SLEEP 
repeatedly until “SLEEP
OFF” appears in the
display.
Prepare the sound source.
Set the time to start playback.
Press  or   repeatedly to set the
hour, then press ENTER .
The minute indication flashes in the
display. Use the procedure above to
set the minute. “OFF” appears and the
hour indication flashes in the display.
Set the time to stop playback
using the same procedure as
step 4.
Select the sound source.
Press  or   repeatedly until the
music source you want appears in the
display, then press ENTER . This
display will show the timer settings.
Press   to turn off the
system.
Continued
CMT-DH7BT.GB.3-097-195-11(1)
Other operations
Each time you press the button, the
minute display changes cyclically as
follows:
90min  80min  70min  … 
10min  OFF
Setting the timer

59GB
Other operations
To
Check the
setting
Do this
1 Press TIMER
MENU .
“TIMER SEL?”
flashes in the display.
2 Press ENTER .
3 Press  or  
repeatedly to select
“PLAY SELECT?”,
then press
ENTER .
Start from step 1.
Change the
setting
Cancel the Play 1 Press TIMER
Timer
MENU .
“TIMER SEL?”
flashes in the display.
2 Press ENTER .
3 Press  or  
repeatedly to select
“TIMER OFF?”, then
press ENTER .
Changing the display
View
abo
Checking the clock
Press DISPLAY  when the system
is turned off. The clock is displayed
for 8 seconds.
Adjusting the brightness of the
display
Press DIMMER  repeatedly.
Each time you press the button, the
display changes cyclically as follows:
DIMMER OFF  DIMMER 1 
DIMMER 2*
* DIMMER 2 is the darkest.
View
disc
Press
Each t
display
…
 Dis
 Clo
Check
remai
Press T
Each t
display

 The Play Timer will not be activated if the
system is turned on or if “STANDBY” flashes
in the display.
 The system turns on 30 seconds before
the preset time. Do not operate the system
from the time the system turns on until the
recording starts.
 Before the system is turned off, if a
connection is made with the Bluetooth
headphones, sounds played by the Play Timer
may be output to the Bluetooth headphones.
When
R/-RW
 Whe
chap
E
or th
T
 Whe
cond
E
title
R
E
chap
R
chap
T
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Notes
60GB
y
stem
ayed
Viewing information
about the disc
Viewing information about the
disc in the front panel display
Press DISPLAY .
Each time you press DISPLAY , the
the
display changes from     
…
 Disc information
 Clock display (for 8 seconds)
Checking the elapsed playing time,
remaining time and titles
Press TIME/TEXT  during playback.
Each time you press TIME/TEXT , the
display changes from     … 
…
When playing a DVD VIDEO or DVDR/-RW in VR mode:
 When the menu or the title without a
chapter is played back
 Elapsed playing time of the menu
or the current title
 Title of the disc1)
 When a chapter other than above
condition is played back
 Elapsed playing time of the current
title
 Remaining time of the current title
 Elapsed playing time of the current
chapter
 Remaining time of the current
chapter
 Title of the disc1)2)
When playing a VIDEO CD/Super
VCD:
 Elapsed playing time of the current
scene/track
 Title of the disc1)4)
When playing MP3 audio tracks on a
DATA CD/DVD:
 Elapsed playing time of the current
track
 Title of the track
Checking the total playing time and
titles
Press TIME/TEXT  repeatedly when
playback is stopped.
Each time you press TIME/TEXT ,
the display changes from    
…
DVD VIDEO or DVD-R/-RW in VR
mode:
 Total number of titles on the disc
 Title of the disc1)
VIDEO CD without PBC playback or
AUDIO CD:
 Total number of the tracks on the disc
and the total playing time of the disc
 Title of the disc1)
VIDEO CD with PBC playback:
 Total number of scene on the disc
 Title of the disc1)
Continued
CMT-DH7BT.GB.3-097-195-11(1)
Other operations
When playing an AUDIO CD or VIDEO
CD without PBC function:
 Elapsed playing time of the current
track
 Remaining time of the current track
 Elapsed playing time of the current
disc3)
 Remaining time of the current disc3)
 Title of the disc1)4)

61GB
1)
2)
3)
4)
“NO TEXT” appears in the display if the
DVD VIDEO is not a DVD-TEXT disc, the
AUDIO CD is not a CD-TEXT disc or the
VIDEO CD does not have text information.
The current chapter number and the current
title number are displayed for 2 seconds
before the display returns to elapsed playing
time when you press TIME/TEXT  during
display of title of the disc.
When Program Play or Shuffle Play is
turned on, the elapsed playing time and the
remaining time of the disc would be skipped.
The current track number and the current
index number (for a disc without PBC) or the
current scene number (for a disc with PBC)
are displayed for 2 seconds before the display
returns to elapsed playing time when you
press TIME/TEXT  during display of the
title of disc.
Viewing information about the
disc in the on-screen display
Press TIME/TEXT .
Each time you press TIME/TEXT 
while playing the disc, the display
changes from     …  
…
The time display that you can view on the
TV screen depends on the disc you are
playing.
T: title or track
C: chapter
D: disc
Bit rate
Notes
 If you play back a disc containing JPEG
image files only, “JPEG” or “No Audio”
appears in the display.
 You cannot use TIME/TEXT  to change
the display of disc information when:
 a JPEG image file is played back.
 playback is stopped for DATA CD/DVD
with MP3 audio tracks and/or JPEG
image files.
 If the MP3 audio track title contains
characters which cannot be displayed, these
characters will be displayed as “*”.
Time information
When
CD wi
 Ela
track
 Rem
 Ela
disc
 Rem
 Ela
track a
When
Elapse
track/fi
Notes
 Only
symb
 Depe
displ
 For M
ISO 9
track
Displa
the di
Album Title
Disc/track/file title
When playing a DVD VIDEO or DVDR/-RW in VR mode:
 Elapsed playing time of the current
title
 Remaining time of the current title
 Elapsed playing time of the current
chapter
 Remaining time of the current chapter
 Elapsed playing time of the current
title and title of the disc
(DVD
When
during
curren
TV scr
When
For ex
multip
to 5.1
a DVD
Examp
For Do
When playing a VIDEO CD/Super
VCD:
Elapsed playing time of the current
scene/track
2 Front
1 Cente
62GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
the


on the
are
When playing an AUDIO CD or VIDEO
CD without PBC function:
 Elapsed playing time of the current
track
 Remaining time of the current track
 Elapsed playing time of the current
disc
 Remaining time of the current disc
 Elapsed playing time of the current
track and title of the disc
When playing a DATA CD/DVD:
Elapsed playing time of the current
track/file
Checking the date information
of JPEG image files
You can check the date information
during playback when Exif* tag is
recorded in the JPEG image files.
Press DISPLAY  repeatedly
during playback.
The Control Menu appears.
Notes
Displaying the audio information of
the disc
(DVD VIDEO only)
When you press AUDIO  repeatedly
during playback, the format of the
current audio signal is displayed on the
TV screen.
Date information
* “Exchangeable Image File Format” is a
digital camera image format defined by the
Japan Electronics & Information Technology
Industries Association (JEITA).
Note
The date information format varies depending
on the area.
Other operations
 Only alphabet letters, numbers and some
symbols can be displayed.
 Depending on the disc, the system can only
display a limited number of characters.
 For MP3 audio tracks with format other than
ISO 9660 Level 1 and Level 2, album title and
track title may not be displayed.
VD-
itle
ent
When playing a DVD VIDEO:
For example, in Dolby Digital format,
multiple signals ranging from monaural
to 5.1 channel signals can be recorded on
a DVD VIDEO.
hapter
ent
Example:
For Dolby Digital 5.1 channel:
ent
2 Surround components
2 Front components +
1 Center component
1 LFE (Low Frequency
Effect) component
63GB
CMT-DH7BT.GB.3-097-195-11(1)
Hooking up optional
components
To enhance your system, you can connect
optional components. Refer to the
operating instructions provided with
each component.
Front panel
 AUDIO IN jack
Connect the audio output jack of an
optional component (portable audio
player, etc.).
 COMPONENT VIDEO OUT jacks
Connect the component video input
jacks of the TV or projector. If your
TV accept progressive format signals,
you must use this connection and
press PROGRESSIVE  on the unit
repeatedly to select “P AUTO” or “P
VIDEO”. You can enjoy higher quality
video images.
 S VIDEO OUT/VIDEO OUT jacks
Connect the S Video/video input
jack of the TV. You can enjoy higher
quality video images when you select
the S VIDEO.
Rear panel
 DIGITAL OUT jack
Connect the digital optical input jack
of an optional digital component
(such as amplifier).
Enjo
soun
amp
Co
See
com
Co
op
wi
Fo
the
wit
Sta
so
Se
wa
See
Note
Sound is output only when the system
function is set to DVD.
64GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
of an
udio
jacks
nput
our
gnals,
nd
unit
or “P
quality
Enjoying the multi channel
sound with the optional
amplifier
See “Hooking up optional
components” on page81.
Start playing a multi channel
source, such as a DVD VIDEO.
Select the audio format you
want.
See “Changing the sound” on page xx.
Other operations
t jack
Connect the speakers to an
optional amplifier equipped
with a decoder.
For the speakers placement, refer to
the operating instructions supplied
with the connected amplifier.
jacks
ut
gher
select
Connect the digital optical cord.
65GB
CMT-DH7BT.GB.3-097-195-11(1)
General
Additional Information
Troubleshooting
Should you encounter a problem with
your system, do the following:
1 Make sure the power cord and
speaker cords are connected
correctly and firmly.
2 Find your problem in the
troubleshooting checklist below and
take the indicated corrective action.
If the problem persists after doing all
of the above, consult your nearest Sony
dealer.
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
 If your system has a voltage
selector, is the voltage selector set
to the correct voltage?
 Are you using only the supplied
speakers?
 Is anything blocking the ventilation
holes on the rear of the system?
After the STANDBY indicator 
stops flashing, reconnect the power
cord, and turn on the system, If the
issue persists, contact your nearest
Sony dealer.
The display starts flashing as soon
as you plug in the power cord even
though you have not turned on the
system.
 Press   (see step 8 of “Hooking
up the system” on page 11).
The clock or timer setting is canceled.
 The power cord is disconnected or a
power failure occurred. Redo “Setting
the clock” (page 14). If you have set
the timer, redo “Waking up to music”
(page 69).
“– –:– –” appears in the display.
 A power failure has occurred. Set the
clock (page 14) and timer settings
(page 69) again.
There is no sound.
 Press VOLUME +  repeatedly.
 The headphones are connected to the
PHONES jack.
 Check the speaker connections
(page 9).
 The system is in pause mode, in Slowmotion Play or in Lock Search. Press
  to start the playback.
 If the BLUETOOTH indicator  is lit
or flashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack . Press and hold
BLUETOOTH OPR  for about
2 seconds until the BLUETOOTH
indicator  turns off.
There
 AT
unit
or V
 Mov
nois
 Con
outl
 Inst
avai
The ti
 Che
corr
 Can
(pag
The re
 Rem
rem
 Mov
 Poin
 Rep
 Loca
fluo
There
 Red
The co
persis
 Turn
on a
irreg
spea
THEAT
work.
 If di
unit
wor
66GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
on
ven
the
king
celed.
or a
tting
et
usic”
the
lowress
 is lit
r than
d, no
ers
old
Speakers
The timer does not function.
 Check the timer setting and set the
correct time (page 69).
 Cancel the Sleep Timer function
(page 69).
Disc Player
The remote does not function.
 Remove the obstacles between the
remote and the unit.
 Move the remote closer to the unit.
 Point the remote at the unit’s sensor.
 Replace the batteries (R6/size AA).
 Locate the unit away from the
fluorescent light.
There is acoustic feedback.
 Reduce the volume.
The color irregularity on a TV screen
persists.
 Turn off the TV set once, then turn it
on after 15 to 30 minutes. If the color
irregularity still persists, place the
speakers farther away from the TV set.
THEATRE SYNC function does not
work.
 If distance between the TV and this
unit is too far, this function may not
work. Install the unit near the TV.
Sound comes from one channel or
unbalanced left and right volume.
 Place the speakers as symmetrically as
possible.
 Check that the speaker are connected
securely and correctly.
 The source being played back is
monaural.
The disc does not eject.
 Consult your nearest Sony dealer.
Playback does not start.
 Check whether a disc is loaded.
 Wipe the disc clean (page 87).
 Reinsert the disc.
 Insert the disc that this system can play
back (page 6).
 Insert the disc in the disc slot with the
label side facing up.
 Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours until
the moisture evaporates.
 Press   to start playback.
 The region code on the DVD VIDEO
does not match the system.
 Cancel the Custom Parental Control
function (page 39).
The sound skips.
 Wipe the disc clean (page 87).
 Reinsert the disc.
 Move the unit to a place without
vibration (e.g., on top of a stable
stand).
 Move the speakers away from the
unit, or place them on separate stands.
When you listen to a track with bass
sounds at high volume, the speaker
vibration may cause the sound to skip.
Continued
CMT-DH7BT.GB.3-097-195-11(1)
Additional Information
the
There is severe hum or noise.
 A TV or VCR is placed too close to the
unit. Move the unit away from the TV
or VCR.
 Move the unit away from the source of
noise.
 Connect the unit to a different wall
outlet.
 Install a noise filter (commercially
available) to the power cord.

67GB
Playback does not start from the first
track.
 The system is in Program Play or
Shuffle Play mode. Turn off Program
Play and Shuffle Play.
 Resume Play has been selected. Press
  twice. Then, press   to start
playback (page 21).
 The title of DVD VIDEO or PBC
menu automatically appears on the TV
screen.
Playback starts automatically.
 The DVD VIDEO features an auto
playback function.
Playback stops automatically.
 Some discs may contain an auto pause
signal. While playing such a disc, the
playback stops at auto pause signal.
You cannot perform some functions
such as Stop, Lock Search, Slowmotion Play, Repeat Play, Shuffle Play
or Program Play.
 Depending on the disc, you may not
be able to do some of the operations
above. Refer to the operating
instructions supplied with the disc.
The DATA CD (MP3 audio track/JPEG
image file) cannot be played back.
 The DATA CD is not recorded in a
format that conforms to ISO 9660
Level 1, Level 2, or Joliet (expansion
format).
 The DATA DVD is not recorded
in a format that conforms to UDF
(Universal Disk Format).
 The MP3 audio track does not have the
extension “.MP3”.
 The data is not stored in the desired
format.
 The MP3 audio tracks in format other
than MPEG 1 Audio Layer 3 cannot be
played back.
 The system can playback to a depth of
8 folders only.
 For MP3/JPEG files, check the “MODE
(MP3, JPEG)” setting (page 30).
 The disc contains more than 200
albums.
 The album contains more than 600
tracks/files.
 For MP3/JPEG files, the album
contains more than 300 tracks/files
when the “MODE (MP3, JPEG)” is set
to “AUTO”.
 The JPEG image file does not have the
extension “.JPG” or “.JPEG”.
 The JPEG image file is larger than
3,072 (width) × 2,048 (height) in
normal mode, or more than 2,000,000
pixels in Progressive JPEG mode which
is mainly used on the Internet website.
 JPEG image files with a high width to
length ratio cannot be played back.
The MP3 audio tracks take longer
time to play back than others.
 After the system reads all the tracks on
the disc, playback may take more time
than usual if:
 the number of albums or tracks on
the disc is very large.
 the album and track organization
structure is very complex.
The disc title, album title, track title,
CD-TEXT and DVD-TEXT characters
do not appear properly.
 Use a disc that conforms to the
ISO 9660 Level 1, Level 2, or Joliet
(expansion).
 The
disp
U
 Lo
N
 Sy
Oth
corr
The su
when
or MP
 Che
setti
 Dep
outp
chan
even
Dolb
The so
you p
CD, M
 Mak
prop
Blueto
Pairin
 Mov
the s
Conne
 The
to co
and
conn
 Ena
Blue
 The
has
oper
68GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
other
not be
th of
MODE
00
es
is set
e the
er
ks on
time
s on
on
itle,
ers
The surround effect is difficult to hear
when you are playing a Dolby Digital
or MPEG audio sound track.
 Check the speaker connections and
settings (pages 9 and 47).
 Depending on the DVD VIDEO, the
output signal may not be the entire 5.1
channel. It may be monaural or stereo,
even if the sound track is recorded in
Dolby Digital or MPEG audio format.
The sound loses stereo effect when
you play back an AUDIO CD, VIDEO
CD, MP3 audio track or DVD VIDEO.
 Make sure the system is connected
properly.
Bluetooth device
Pairing cannot be done.
 Move the Bluetooth device closer to
the system.
Connection is not possible.
 The Bluetooth device you attempted
to connect does not support the A2DP
and AVRCP profiles, and cannot be
connected with the system.
 Enable the Bluetooth function of the
Bluetooth device.
 The pairing registration information
has been erased. Perform the pairing
operation again.
 While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
The sound skips or fluctuates, or the
connection is lost.
 The system and the Bluetooth device
are too far apart.
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
The sound of your Bluetooth device
cannot be heard on this system.
 Turn up the volume on your Bluetooth
device first, and then adjust the volume
using VOLUME +/ .
Severe hum or noise
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
 Turn down the volume of the
connected Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
 Turn down the volume of the system
using VOLUME  . If your
headphones have a volume control,
also adjust the volume using the
headphone’s volume control.
Continued
CMT-DH7BT.GB.3-097-195-11(1)
Additional Information
0,000
which
bsite.
th to
k.
 The character code that can be
displayed by this system are as follows:
 Upper cases (A to Z)
 Lower cases (a to z)
 Numbers (0 to 9)
 Symbols (< > * +,  / [ ] _)
Other characters may not be displayed
correctly.

69GB
Picture
There is no picture.
 Press FUNCTION +/  repeatedly
to select “DVD” (or press DVD  
on the unit).
 Check that the system is connected
securely.
 The video cord is damaged. Replace it
with a new one.
 Make sure you connect the unit to the
video input jack of your TV (page 10).
 Make sure you turn on the TV and
operate the TV correctly.
 Press PROGRESSIVE  on the unit
repeatedly to select “INTERLACE”
if you connect your TV to the unit’s
COMPONENT VIDEO OUT jacks
and your TV cannot accept progressive
signal.
 You have set to progressive format but
your TV cannot accept the signal in
progressive format. In this case, set to
interlace format (the default setting)
(page 16).
 Even if your TV is compatible with
progressive format (525p/625p)
signals, the image may be affected
when you set to progressive format. In
this case, set to interlace format (the
default setting) (page 16).
 Make sure you select the video input
on the TV so that you can view the
pictures from the system.
 Make sure you connect the unit and
your TV using only the supplied video
code.
Picture noise appears.
 Clean the disc.
 If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality. If you still experience
problems after checking your
connections, connect your unit directly
to your TV’s S Video input (page 10).
 Keep the speaker cords away from the
antennas.
 When you connect your TV to the
COMPONENT VIDEO OUT jacks
and play back video-based software
in progressive signal format, some
sections of the image may appear
unnatural due to the conversion
process.
The su
chang
 Mul
on t
back
 The
the s
The aspect ratio of the TV screen
cannot be changed even though you
can set “TV TYPE” under “SCREEN
SETUP” in the Setup Menu when you
play back a wide picture.
 The aspect ratio is fixed on your DVD
VIDEO.
 If you connect the unit with the S
Video cord, connect directly to the TV.
Otherwise, you may not change the
aspect ratio.
 Depending on the TV, you may not
change the aspect ratio.
Tuner
Messages do not appear on the TV
screen in the language you want.
 Select the language you want for the
on-screen display in “OSD” under
“LANGUAGE SETUP” in the Setup
Menu (page 44).
The language for the sound track
cannot be changed.
 Multilingual tracks are not recorded on
the DVD VIDEO being played back.
 The DVD VIDEO prohibits changing
the language for the sound track.
The su
 The
subt
The a
 Mul
DVD
 The
the a
The ra
 The
a po
than
stati
There
(“TUN
displa
 Set t
(pag
 Con
(pag
 Find
prov
the a
good
you
exte
 Keep
Hom
from
cord
 The
sign
sure
 Loca
the s
70GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
has to
V, the
DVD
ence
irectly
10).
m the
ks
are
h you
n you
he TV.
he
ot
TV
t.
the
up
ded on
ack.
ging
The subtitles cannot be turned off.
 The DVD VIDEO prohibits turning off
subtitles.
The angles cannot be changed.
 Multi-angles are not recorded on the
DVD VIDEO being played back.
 The DVD VIDEO prohibits changing
the angles.
Tuner
The radio presetting is canceled.
 The power cord is disconnected or
a power failure occurred for longer
than half a day. Redo “Presetting radio
stations” (page 51).
There is severe hum or noise.
(“TUNED” or “ST” flashes in the
display)
 Set the proper band and frequency
(page 51).
 Connect the antenna properly
(page 10).
 Find a place and an orientation that
provide good reception, then set up
the antenna again. If you cannot obtain
good reception, we recommend that
you connect a commercially available
external antenna.
 Keep the antennas, SiriusConnect
Home tuner, and AC adaptor away
from the speaker cords and the power
cord to avoid picking up noise.
 The supplied FM lead antenna receives
signals along its entire length, so make
sure you extend it fully.
 Locate the antennas as far away from
the speaker cords as possible.
CMT-DH7BT.GB.3-097-195-11(1)
 Try turning off the surrounding
electrical equipment.
A stereo FM program cannot be
received in stereo.
 Press FM MODE  repeatedly until
“MONO” disappears from the display.
The system cannot receive satellite
channels at all.
 Check that the XM Mini-Tuner and
Home Dock or the SiriusConnect
Home tuner are connected properly.
 The receiving condition is not good.
Move to the place where the condition
is good.
 Check that you subscribed to the
desired satellite radio service (page
XX).
Optional components
There is no sound.
 Refer to General item “There is no
sound.” (page 79) and check the
condition of the system.
 Connect the component properly
(page 76) while checking:
 if the cords are connected properly.
 if the cord plugs are firmly inserted
all the way.
 Turn on the connected component.
 Refer to the operating instructions
supplied with the connected
component and start playing.
Continued

Additional Information
DVD
The subtitles language cannot be
changed.
 Multilingual subtitles are not recorded
on the DVD VIDEO being played
back.
 The DVD VIDEO prohibits changing
the subtitles.
71GB
If the system still does not operate
properly after performing the
above measures or other troubles
not described above occur, reset the
system as follows:
1 Unplug the power cord.
2 Plug the power cord back in.
3 Press   to turn on the system.
4 Press  , DISPLAY  and  
at the same time.
“RESET” appears in the display.
The system is reset to the factory settings
except for DVD settings. You should set
the settings you made, such as the preset
stations, clock and timer.
To return the DVD setup to the default
settings*, perform reset as follows:
DISPLAY  when playback
is stopped.
The Control Menu appears on the TV
screen.
1 Press
2 Press  or   repeatedly to
select
ENTER .
(SETUP), then press
3 Press  or   repeatedly to select
“RESET”, then press ENTER .
4 Press  or   repeatedly to select
“YES”, then press ENTER .
It takes a few seconds to complete. Do
not press   when resetting the
system.
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function
is activated to prevent the system
from malfunctioning, a 5-character
service number (e.g. C 13 50) with a
combination of a letter and 4 digits
appears on the TV screen and the front
panel display. In this case, check the
following table.
When
on the
When
version
numbe
Althou
for Son
operat
the sys
again t
First 3
Cause and corrective
characters of action
the service
number
C 13
This disc is dirty.
 Clean the disc with a
soft cloth (page 87).
C 31
The disc is not inserted
correctly.
 Restart the system,
then re-insert the
disc correctly.
E XX
To prevent a
(XX is a
malfunction, the
number)
system has performed
the self-diagnosis
function.
 Contact your nearest
Sony dealer or local
authorized Sony
service facility and
give the 5-character
service number.
Example: E 61 10
* Except for Parental Control settings
72GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
When displaying the version number
on the TV screen
he
ront
When you turn on the system, the
version number [VER.X.XX] (X is a
number) may appear on the TV screen.
Although this is not a malfunction and
for Sony service use only, normal system
operation will not be possible. Turn off
the system, and then turn on the system
again to operate.
ctive
Messages
One of the following messages may
appear or flash in the front panel display
during operation.
DVD player, Tuner
Cannot Play
 A disc that cannot be played back was
inserted.
 A DVD VIDEO with unsupported
region code was inserted.
with a
87).
erted
em,
he
med
No Disc
There is no disc in the disc slot.
earest
ocal
nd
cter
Not In Use
You have pressed a button whose
operation is not allowed or invalid at that
time.
Additional Information
Data Error
 The MP3 audio track and JPEG image
file you want to play back is damaged.
 The MP3 audio track does not conform
to MPEG 1 Audio Layer 3 format.
 The JPEG image file does not conform
to DCF format.
 The MP3 audio track has the extension
“.MP3” but it is not in MP3 format.
 The JPEG image file has the extension
“.JPG” or “.JPEG” but it is not in JPEG
format.
OFF TIME NG!
The on time and off time of Play Timer
is the same.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

73GB
PASSWORD
Custom Parental Control or Parental
Control is set.
Please Wait
The system is doing initialization process.
Reading
The system is reading information of the
disc. Some buttons are not available.
Bluetooth device
Connect
Bluetooth communication was
established.
Disconnect
Communication with a Bluetooth device
was cut off for some reason, or Bluetooth
communication was ended.
Not Connect
Connection was not possible.
No Device
A pairable Bluetooth device was not
found.
Not In Use
The system is not connected with a
Bluetooth device using AVRCP.
PIN?
The system is asking for the passcode.
For details, see “Using the Bluetooth
function” (page 14).
Please Wait
The system is reading for usage of a
Bluetooth device.
XM
SIRIUS
ANTENNA
The XM Mini-Tuner and Home Dock
are not connected. Check all the
connections.
ANTE
The an
Check
SiriusC
antenn
CH – – –
You have entered an invalid channel
number. The channel to be tuned-in is
void due to the change by the broadcast
service, or the receiving condition is not
good.
LOADING
The system have not finished receiving
the entire audio data or text information.
Some buttons are not available.
ACQU
The re
movin
For de
see the
SiriusC
Call 8
You ha
chann
NO SIGNAL
The receiving condition is not good. Try
moving the antenna to another location.
Make sure the antenna points south. For
details about the antenna location, see
the instructions supplied with the XM
Mini-Tuner and Home Dock.
CHEC
The Si
not co
conne
again.
suppli
tuner
OFF AIR
The channel is not broadcasted now.
Invali
You ha
numbe
void d
service
good.
UPDATING
You have not subscribed for XM or the
channel is not authorized. You need to
subscribe for XM.
––––––
There is no text information or time
information in the channel. This is not
an error. The text information may not
be displayed depending on the system
condition, for example, right after the
system has received a channel.
SUB U
You ha
the ch
to sub
UPDA
Chann
Home
––––
There
inform
an erro
be disp
condit
system
74GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
SIRIUS
ck
n is
dcast
s not
ing
ation.
w.
the
d to
not
not
em
he
ACQUIRING
The receiving condition is not good. Try
moving the antenna to another location.
For details about the antenna location,
see the instructions supplied with the
SiriusConnect Home tuner.
Call 888–539–SIRI
You have not subscribed for the selected
channel.
CHECK SIRIUS
The SiriusConnect Home tuner is
not connected properly. Check all the
connections, and then turn the system on
again. Also make sure if the AC adaptor
supplied with the SiriusConnect Home
tuner is connected to a wall socket.
Invalid
You have entered an invalid channel
number. The channel to be tuned-in is
void due to the change by the broadcast
service, or the receiving condition is not
good.
SUB UPDATED
You have not subscribed for SIRIUS or
the channel is not authorized. You need
to subscribe for SIRIUS.
UPDATING
Channel information or SiriusConnect
Home tuner firmware is being updated.
––––––
There is no text information or time
information in the channel. This is not
an error. The text information may not
be displayed depending on the system
condition, for example, right after the
system has received a channel.
Precautions
Discs that this system CANNOT play
 Discs of non-standard shape (for example,
heart, square, star)
 Discs that have adhesive tape, paper, or
sticker attached to them
 Rental or used discs with attached seals
where the glue extends beyond the seal
 Discs that have labels printed using ink that
feels tacky when touched
Notes on discs
 Before playing, wipe the disc with a cleaning
cloth from the center out to the edge.
 Do not clean discs with solvents, such as
benzine thinner, or commercially available
cleaners or anti-static spray intended for
vinyl LPs.
 Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
 Do not use discs encircled with a protection
ring. This may cause a malfunction to the
system.
On operating voltage
Before operating the system, check that the
operating voltage of the unit is identical with
the voltage of your local power supply.
On safety
 The unit is not disconnected from the
AC power source (mains) as long as it is
connected to the wall socket, even if the unit
itself has been turned off.
 Completely disconnect the power cord
(mains lead) from the wall socket (mains)
if it is not going to be used for an extended
period of time. When unplugging the unit,
always grip the plug. Never pull the cord
itself.
 Should any solid object or liquid get into
the system, unplug the system, and have
it checked by qualified personnel before
operating it again.
 The AC power cord can be changed only by a
qualified service facility.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

Additional Information
. Try
ation.
h. For
see
XM
ANTENNA
The antenna is not connected properly.
Check the connection between the
SiriusConnect Home tuner and the
antenna.
75GB
On placement
 Do not place the system in an inclined
position or in locations that are extremely
hot, cold, dusty, dirty, or humid or lacking
adequate ventilation, or subject to vibration,
direct sunlight or a bright light.
 Be careful when placing the unit or speakers
on surfaces that have been specially treated
(for example, with wax, oil, polish) as
staining or discoloration of the surface may
result.
 If the system is brought directly from a cold
to a warm location or is placed in a very
damp room, moisture may condense on the
lens inside the DVD player, and cause the
system to malfunction. In this situation,
remove the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
On heat buildup
 Heat buildup on the unit during operation is
normal and is not cause for alarm.
 Do not touch the cabinet if it has been used
continuously at a high volume because the
cabinet may have become hot.
 Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted. In
this situation, turn off the TV, wait 15 to 30
minutes, and turn it back on. If there is no
improvement, move the speakers far away from
the TV.
IMPORTANT NOTICE
Caution: If you leave a still video image
or on-screen display image displayed on
your TV for an extended period of time via
this system, you risk permanent damage
to your TV screen. Projection TVs are
especially susceptible to this.
Cleaning the cabinet
Clean this system with a soft cloth slightly
moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring
powder, or solvent, such as thinner, benzine,
or alcohol.
Specifications
Main unit (HCD-DH7BT/Compact Disc
Receiver)
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6 ohm loads, both channels driven,
from 120 – 10,000 Hz; rated 50 watts per
channel minimum RMS power, with no
more than 10% total harmonic distortion
from 250 milliwatts to rated output.
Amplifier section
DIN power output (rated)
40 W + 40 W (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker:
50 W + 50 W (6 ohms at 1 kHz, 10%
THD)
Inputs:
AUDIO IN (stereo mini jack):
Voltage 620 mV, impedance
47 kilohms
Outputs:
DIGITAL OUT (square optical connector
jack):
Wavelength 660 nm
VIDEO OUT (phono jack):
Max. output level 1 Vp-p, unbalanced,
Sync. negative load impedance
75 ohms
COMPONENT VIDEO OUT:
Y: 1 Vp-p, 75 ohms
Pb/Cb: 0.7 Vp-p, 75 ohms
Pr/Cr: 0.7 Vp-p, 75 ohms
S VIDEO OUT (4-pin/mini-DIN jack):
Y: 1 Vp-p, unbalanced, Sync. negative
C: 0.286 Vp-p, load impedance
75 ohms
PHONES (stereo mini jack):
accepts headphones of 8 ohms or
more
Blueto
Comm
Outpu
Maxim
Freque
Modul
Compa
Suppor
Disc pl
System
Laser:
Laser D
Semico
Freque
Video
76GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
sc
en,
per
no
ion
DIN)
ence)
Bluetooth section
Tuner section
Communication system:
Bluetooth Standard version 2.0
Output:
Bluetooth Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m1)
Frequency band:
2.4 GHz band (2.4000 GHz – 2.4835
GHz)
Modulation method:
FHSS
Compatible Bluetooth profiles2):
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
Supported codecs:
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range:
87.5  108.0 MHz (100 kHz step)
Antenna:
FM lead antenna
Antenna terminals:
75 ohms unbalanced
Intermediate frequency:
10.7 MHz
AM tuner section
Tuning range:
530  1,710 kHz (with the interval set
at 10 kHz)
531  1,710 kHz (with the interval set
at 9 kHz)
Antenna:
AM loop antenna
Antenna terminals:
External antenna terminal
Intermediate frequency:
450 kHz
1)
10%
anced,
):
gative
or
Disc player section
System:
Compact disc and digital audio and
video system
Laser:
Laser Diode Properties:
Emission duration: continuous
Laser Output*: Less than 1000 μW
* This output is the value measurement
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Speaker
Front speaker (SS-CDH3)
Speaker system:
2-way, bass-reflex type, magnetically
shielded
Speaker units:
Woofer: 12 cm, cone type
Tweeter: 4 cm, cone type
Nominal impedance:
6 ohms
Dimensions (w/h/d):
Approx. 140 × 250 × 211 mm
Mass:
Approx. 2.4 kg net per speaker
Additional Information
ctor
The actual range will vary depending
on factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
reception sensitivity, antenna’s
performance, operating system,
software application, etc.
2)
Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
Semiconductor laser:
(DVD: λ=650 nm, CD: λ=790 nm)
Frequency response:
DVD (PCM 48 kHz): 2 Hz  22 kHz
(±1dB)
CD: 2 Hz  20 kHz (±0.5 dB)
Video color system format:
NTSC
Continued
CMT-DH7BT.GB.3-097-195-11(1)

77GB
General
Power requirements:
120 V AC, 60 Hz
Power consumption:
40 W
Dimensions (w/h/d) (Approx.):
190 × 141 × 272 mm
Mass (Approx.):
xx.x kg
Supplied accessories:
Remote Commander (1)
R6 (Size AA) batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Video cord (1)
Front speaker pads (8)
Design and specifications are subject to
change without notice.
• Standby power
consumption: 0.5 W
• Halogenated flame
retardants are not used in
the certain printed wiring
boards.
Guid
Use th
DIS
follow
Contro
Contro
Cont
The C
Examp
78GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Guide to the Control Menu display
Use the Control Menu to select a function and to view related information. Press
DISPLAY  repeatedly to turn on, turn off or change the Control Menu display as
follows:
Control Menu display 1  Control Menu display 2 (appears for certain discs only) 
Control Menu display off  Control Menu display 1  …
Control Menu display
The Control Menu display 1 and 2 will show different items depending on the disc type.
Example: Control Menu display 1 when playing a DVD VIDEO
Currently playing title number
Currently playing chapter number
Total number of titles
Total number of chapters
Selected item
Playback status ( Playback,
 Pause,  Stop, etc.)
Type of disc being played
back
Elapsed playing time
Current setting
Options
Function name of
selected Control
Menu item
Additional Information
Control Menu
items
Operation message
Continued
CMT-DH7BT.GB.3-097-195-11(1)

79GB
List of Control Menu items
Item
Item
Item Name, Relevant Disc Type, Function
TITLE/SCENE/TRACK
Selects the title, scene, or track to be played back.
CHAPTER/INDEX
Selects the chapter or index to be played back.
TRACK
Selects the track to be played back.
ORIGINAL/PLAY LIST
Selects the playback sequence either to the originally recorded
sequence or to the playlist created on the disc.
TIME/TEXT
Checks the elapsed playing time and the remaining time.
Input the time code for picture and music searching.
Displays the text information on the CD-TEXT discs, DVD TEXT
discs and MP3 audio tracks.
PROGRAM
Play back the track in the order you want.
SHUFFLE
Play back the track in random order.
REPEAT
Play back a disc repeatedly, the entire disc (all titles/all tracks/all
albums) repeatedly or one title/chapter/track/album/file repeatedly.
A/V SYNC
Sets the delay time between the sound and display.
PARENTAL CONTROL
Set to prohibit playback on this system.
80GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Item
Item Name, Relevant Disc Type, Function
SETUP
QUICK Setup
Use QUICK SETUP to choose the language of the on-screen display
and the aspect ratio of the TV.
CUSTOM Setup
In addition to the Quick Setup setting, you can adjust other settings.
RESET
Returns the settings in “SETUP” to the default setting.
ALBUM
Selects the album to be played back.
FILE
Selects the JPEG image file to be played back.
DATE
Displays the date when the picture was taken by a digital camera.
INTERVAL
Specifies the duration for which the slides are displayed on the TV
screen.
MODE (MP3, JPEG)
Selects the data type: MP3 audio track (AUDIO), JPEG image file
(IMAGE) or both (AUTO) to be played back when playing a DATA
CD/DVD.
y.
Additional Information
EFFECT
Selects the transition effects to be used for changing slides during a
slide show.
81GB
CMT-DH7BT.GB.3-097-195-11(1)
Pare
Language code list
Code
The language spellings conform to the ISO 639:1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027
1028
1032
1039
1044
1045
1051
1052
1053
1057
1059
1060
1061
1066
1067
1070
1079
1093
1097
1103
1105
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
1166
1171
1174
1181
1183
1186
1194
1196
1203
1209
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
1332
1334
1345
1347
1349
1350
1352
1353
1356
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
1436
1463
1481
1482
1483
1489
1491
1495
1498
1501
1502
1503
1505
1506
1507
1508
1509
1511
1512
1513
1514
1515
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
1539
1540
1543
1557
1564
1572
1581
1587
1613
1632
1665
1684
1697
1703
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali; Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian; Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto; Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
Not specified
2044
2047
2046
2057
2070
2079
2090
2092
2115
82GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Parental Control area code list
ge
Code Area
Code Area
Code Area
Code Area
2044
2047
2046
2057
2070
2079
2090
2092
2115
2165
2174
2109
2248
2238
2254
2276
2304
2363
2362
2376
2390
2379
2427
2424
2436
2489
2501
2149
2499
2086
2528
2184
Argentina
Australia
Austria
Belgium
Brazil
Canada
Chile
China
Denmark
Finland
France
Germany
India
Indonesia
Italy
Japan
Korea
Malaysia
Mexico
Netherlands
New Zealand
Norway
Pakistan
Philippines
Portugal
Russia
Singapore
Spain
Sweden
Switzerland
Thailand
United Kingdom
Additional Information
se
fied
83GB
CMT-DH7BT.GB.3-097-195-11(1)
Bluetooth wireless
technology
Bluetooth wireless technology is a shortrange wireless technology linking digital
devices, such as personal computers and
digital still cameras. Using the Bluetooth
wireless technology, you can operate the
units involved within a range of about 10
meters.
The Bluetooth wireless technology is
commonly used between two devices,
but a single device can be connected to
multiple devices.
You do not need wires to get connected
as you do with a USB connection, and
you do not need to place the devices face
to face as you do with wireless infrared
technology. You can use the technology
with one Bluetooth device in your bag
or pocket.
Bluetooth wireless technology is a global
standard supported by thousands of
companies. These companies produce
products that meet the global standard.
Supported Bluetooth version and
profiles
Profile refers to a standard set of
capabilities for various Bluetooth product
capabilities. This system supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
Effective communication range
Effect
Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. The effective
communication range may become
shorter under the following conditions.
 When a person, metal object, wall
or other obstruction is between the
devices with a Bluetooth connection
 Locations where a wireless LAN is
installed
 Around microwave ovens that are in
use
 Locations where other electromagnetic
waves occur
The ra
may in
medic
may re
off the
mobile
the fol
 In h
at ga
flam
 Nea
Effects of other devices
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. This could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
 Try connecting this system and
Bluetooth mobile phone or Bluetooth
device when you are at least 10
meters away from the wireless LAN
equipment.
 Turn off the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
Notes
 This
comp
as a m
comm
Howe
depen
other
perfo
techn
 Sony
for da
infor
using
 Bluet
guara
have
 Bluet
must
presc
must
when
speci
the ch
Bluet
conn
meth
 Noise
cut o
devic
the co
surro
84GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Effects on other devices
ithin
cted
ons.
he
ion
e in
gnetic
uency
ooth
AN
s LAN
tooth
Notes
 This system supports security functions that
comply with the Bluetooth specification
as a means of ensuring security during
communication using Bluetooth technology.
However, this security may be insufficient
depending on the setting contents and
other factors, so always be careful when
performing communication using Bluetooth
technology.
 Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
 Bluetooth communication is not necessarily
guaranteed with all Bluetooth devices that
have the same profile as this system.
 Bluetooth devices connected with this system
must comply with the Bluetooth specification
prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even
when a device complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
 Noise may occur or the audio may
cut off depending on the Bluetooth
device connected with this system,
the communications environment, or
surrounding conditions.
Playable Bluetooth
devices
You can check the websites below for the
Bluetooth compatible devices.
For customers in the U.S.A.:

For customers in Canada:

For customers in Europe:

For customers in Latin America:

For customers in Asia and Oceania:

Additional Information
gnetic
result
, try
The radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn
off the power on this system, Bluetooth
mobile phone and Bluetooth device in
the following locations:
 In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gasses may be present
 Near automatic doors or fire alarms
85GB
CMT-DH7BT.GB.3-097-195-11(1)
Glossary
Album
Section of a music or picture piece on
a DATA CD or DATA DVD containing
MP3 audio tracks, JPEG image files.
Chapter
Subdivision of a title on a DVD VIDEO.
A title is composed of several chapters.
Dolby Digital
This sound format for movie theaters is
more advanced than Dolby Surround
Pro Logic. In this format, the surround
speakers output stereo sound with
an expanded frequency range and a
subwoofer channel for deep bass is
independently provided. This format is
also called “5.1” because the subwoofer
channel is counted as 0.1 channel (since
it functions only when a deep bass effect
is needed). All six channels in this format
are recorded separately to realize superior
channel separation. Furthermore, since
all the signals are processed digitally, less
signal degradation occurs.
DTS
Digital audio compression technology
that the Digital Theater Systems, Inc.
developed. This technology conforms
to 5.1-channel surround. The surround
channel is stereo and there is discrete
subwoofer channel in this format. DTS
provides the same 5.1 discrete channels
of high quality digital audio. The good
channel separation is realized because the
all channel data is recorded discrete and
processed in digital.
DVD VIDEO
DVD+
A disc that contains up to 8 hours of
moving pictures even though its diameter
is the same as a AUDIO CD.
The data capacity of a single-layer and
single-sided DVD VIDEO, at 4.7 GB
(Giga Byte), is
7 times that of a AUDIO CD.
Furthermore, the data capacity of a duallayer and single-sided DVD VIDEO is
8.5 GB, a single-layer and double-sided
DVD VIDEO 9.4 GB, and a dual-layer
and double-sided DVD VIDEO 17 GB.
The picture data uses the MPEG 2
format, one of the worldwide standards
for digital compression technology. The
picture data is compressed to about 1/40
of its original size. The DVD VIDEO
also uses variable rate coding technology
that changes the data to be allocated
according to the status of the picture.
The audio data is recorded in Dolby
Digital as well as in PCM, allowing you to
enjoy more realistic audio presence.
Furthermore, various advanced functions
such as the multi-angle, multilingual, and
Parental Control functions are provided
with the DVD VIDEO.
A DVD
and re
record
the DV
DVD-RW
A DVD-RW is a recordable and
rewritable disc that is the same size as
a DVD VIDEO. The DVD-RW has two
different modes: VR mode and Video
mode. DVD-RWs created in Video
mode have the same format as a DVD
VIDEO, while discs created in VR (Video
Recording) mode allow the contents to
be programmed or edited.
File
A JPEG
CD or
definit
consis
Film b
softw
DVD V
based
based
image
shown
DVD V
or sitc
(or 60
Interl
The In
standa
image
frame
betwee
lines a
lines, a
MultiVariou
camer
DVD V
86GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
f
ameter
nd
DVD+RW
Multilingual function
A DVD+RW (plus RW) is a recordable
and rewritable disc. DVD+RWs use a
recording format that is comparable to
the DVD VIDEO format.
Several languages for the sound or
subtitles in a picture are recorded on
some DVD VIDEOs.
File
dualO is
ded
yer
GB.
ards
The
1/40
ology
e.
you to
as
two
eo
VD
Video
s to
Film based software, Video based
software
DVD VIDEOs can be classified as Film
based or Video based software. Film
based DVD VIDEOs contain the same
images (24 frames per second) that are
shown at movie theaters. Video based
DVD VIDEOs, such as television dramas
or sitcoms, displays images at 30 frames
(or 60 fields) per second.
Interlace format (Interlaced scanning)
The Interlace format is the NTSC
standard method for displaying TV
images at 30 frames per second. Each
frame is scanned twice-alternately
between the even numbered scanning
lines and then odd numbered scanning
lines, at 60 times per second.
Multi-angle function
Various angles, or viewpoints of the video
camera, for a scene are recorded on some
DVD VIDEOs.
A function of the DVD VIDEO to limit
playback of the disc by the age of the
users according to the limitation level in
each country. The limitation varies from
disc to disc; when it is activated, playback
is completely prohibited, violent scenes
are skipped or replaced with other scenes
and so on.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version
2.0) to control playback. By using menu
screens recorded on VIDEO CDs with
PBC functions, you can enjoy playing
simple interactive programs, programs
with search functions, and so on.
Progressive format (sequential
scanning)
In contrast to the Interlace format,
the progressive format can reproduce
50  60 frames per second by
reproducing all scanning lines (525
lines for the NTSC system, 625 lines
for PAL system). The overall picture
quality increases and still images, text
and horizontal lines appear sharper. This
format is compatible with the 525 or 625
progressive format.
Continued
CMT-DH7BT.GB.3-097-195-11(1)

Additional Information
ctions
al, and
ided
A JPEG image file recorded on a DATA
CD or DATA DVD. (“File” is an exclusive
definition for this system.) A single file
consists of a single image.
Parental Control
87GB
Region Code
VIDEO CD
This system is used to protect copyrights.
A region code is allocated on each DVD
system or DVD VIDEO according to
the sales region. Each region code is
shown on the unit as well as on the disc
packaging. The system can play back
the discs that match its region code. The
system can also play back discs with the
“ ALL ” mark. Even when the region code
is not shown on the DVD VIDEO, the
region limit may still be activated.
A compact disc that contains moving
pictures.
The picture data uses the MPEG 1
format, one of the worldwide standards
for digital compression technology. The
picture data is compressed to about 1/140
of its original size. Consequently, a 12 cm
VIDEO CD can contain up to 74 minutes
of moving pictures.
VIDEO CDs also contain compact audio
data.
Sound outside the range of human
hearing are compressed while the
sounds we can hear are not compressed.
VIDEO CDs can hold 6 times the audio
information of conventional AUDIO
CDs.
There are 2 versions of VIDEO CDs.
 Version 1.1: You can play back only
moving pictures and sounds.
 Version 2.0: You can play back highresolution still pictures and enjoy PBC
functions.
This system conforms to both versions.
Scene
On a VIDEO CD with PBC functions,
the menu screens, moving pictures and
still pictures are divided into sections
called “scenes”.
Title
The longest section of a picture or a
music piece on a DVD VIDEO; a movie,
etc., for a picture piece on video software,
or the entire album in audio software.
Track
Section of a picture or a music piece on
a VIDEO CD, CD, or MP3. An album is
composed of several tracks (MP3 only).
88GB
CMT-DH7BT.GB.3-097-195-11(1)
Index
Numerics
16:9 69
4:3 LETTER BOX 69
4:3 OUTPUT 71
4:3 PAN SCAN 69
DATA CD 43, 47
DATA DVD 43, 47
DIMMER 59
DISPLAY 52
Dolby Digital 35, 83
DTS 35, 83
DVD 83
DVD+RW 84
DVD’s menu 35
DVD-RW 37, 84
Language Code List 86
LANGUAGE SETUP 69
Listening to other
components 23
Listening to the radio xx
Listening to TV sound 24
Locating a specific point by
watching the TV screen 28
A2DP 41
AVRCP 41
A/V SYNC 41
ALBUM 29
Album 83
ANGLE 40
AUDIO 69
AUDIO DRC 72
EFFECT 46
Fast forward 28
Fast reverse 28
FILE 29
File 84
Film based software 84
Freeze Frame 28
Front panel 87
Front panel display 38, 88
Category 29
CATEGORY 29
CATEGORY MODE 29
CHAPTER 29
Chapter 83
COLD RESET 75
COLOR SYSTEM (VIDEO
CD) 70
COMPONENT VIDEO
OUT 19
Continuous play 22
Control Menu Display 89
Controlling the TV 53
CUSTOM 67
CUSTOM PARENTAL
CONTROL 60
CUSTOM SETUP 71
Handling discs 77
MENU 69
Microphones 54
MODE (MP3, JPEG) 45
MOVIE/MUSIC 25
MP3 42, 43
Multi Session CD 7
Multi-angle function 40, 84
MULTI-DISC RESUME 72
Multilingual function 84
ORIGINAL 37
OSD 69
Other Component Hookup 21
INDEX 29
Instant Advance 22
Instant Replay 22
INTERLACE 20
Interlace format 84
INTERVAL 46
Additional Information
BACKGROUND 70
Batteries 8
BLACK LEVEL 70
BLACK LEVEL
(COMPONENT OUT) 70
Bluetooth device address 41
BLUETOOTH OPR 41
JPEG 42, 43
Continued
CMT-DH7BT.GB.3-097-195-11(1)

89GB
P
PARENTAL CONTROL 61
Parental Control 84
Parental Lock 84
Pairing 41
PAUSE MODE 71
Passcode 41
Passkey 41
PBC Playback 49
PIN 41
PICTURE NAVI 30, 44
PLAY LIST 37
Play Timer xx
Playback Control (PBC) 84
Playing a CD/tape xx
Program Play 31
PROGRESSIVE AUTO 20
Progressive format 19, 84
PROGRESSIVE VIDEO 20
THEATRE SYNC 53
TIME/TEXT 29
Timer xx
TITLE 29
Title 84
TRACK 29
Track 85
TRACK SELECTION 71
Troubleshooting 77
TV Hookup 18
TV TYPE 69
Radio 51
Radio Stations 50
Rear Panel 87
Region Code 7, 84
Remote 8, 53
Repeat Play 34
RESET 68
Resume Play 30
Unpacking 82
Usable discs 6
VIDEO CD 85
XM 85
XM Radio ID 85
Satellite Radio 84
SIRIUS 84
SIRIUS ID 84
S VIDEO 18
Scan 28
SCENE 29
Scene 84
SCREEN SAVER 70
SCREEN SETUP 69
Searching 28
Selecting 25
SETUP 67
Setup Display 67, 93
Shuffle Play 33
SLEEP 58
Sleep Timer xx
Slide Show 45
Slow-motion Play 28
SUBTITLE 41, 69
90GB
CMT-DH7BT.GB.3-097-195-11(1)
CMT-
Additional Information
91GB
CMT-DH7BT.GB.3-097-195-11(1)
Printed in China
CMT-DH7BT.GB.3-097-195-11(1)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Trapped                         : False
Creator Tool                    : Adobe InDesign CS2 (4.0.4)
Modify Date                     : 2006:12:06 16:13:40+09:00
Create Date                     : 2006:12:01 12:43:01+09:00
Metadata Date                   : 2006:12:06 16:13:40+09:00
Format                          : application/pdf
Title                           : 010COV.indb
Creator                         : gotanda
Document ID                     : uuid:5d6c9292-cef8-41dd-9a99-d2e6ce03f87e
Instance ID                     : uuid:811c65a5-b66d-4781-a902-f35c3007977b
Page Count                      : 92
Author                          : gotanda

EXIF Metadata provided by EXIF.tools