Sony Group HMZ-WM1 Wireless HD Sink radio module User Manual

Sony Corporation Wireless HD Sink radio module Users Manual

Users Manual

Installation Manual MODEL : SII-SK63101 FCC ID:AK8-HMZ-WM1 IC : 409B-HMZWM1 1. Example of mounting to the final product. 2. Contents of the plan described in the manual of the final product. For FCC "Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which MainboardCross-sectionAV/PowerCableRF BoardBB Chip RF ChipBatteryModule’s shield caseExterior case (ABS)Additional shield case / Heat sinkAdditional shield case / Heat sinkEUTRF boardRFFPCRF boardRFEUTEUTHeat sinkConnect tomain boardwith FPCAssemblyAV/PowerCableBattryTop coverEUTMiddle coverBatteryBottom coverScrewSONY Corp.
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help." FCC WARNING You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For IC "This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." For FCC/IC "This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
3. Contents of the plan described in the label of the final product. For FCC Label of the end product: For SII-SK63101 module: The final end product must be labeled in a visible area with the following "Contains FCC ID:AK8-HMZ-WM1 ". For IC Label of the end product: For SII-SK63101 module: The final end product must be labeled in a visible area with the following "Contains IC:409B-HMZWM1 ".

Navigation menu