Sony Group J20H084AC WLAN Module User Manual J20H084 00
Sony Corporation WLAN Module J20H084 00
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2351942 |
| Application ID | Q15x93iLW9jKYT7bsZSeTw== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 54.1kB (676304 bits) |
| Date Submitted | 2014-08-08 00:00:00 |
| Date Available | 2014-12-31 00:00:00 |
| Creation Date | 2014-07-22 08:57:59 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2014-07-23 10:18:12 |
| Document Title | Microsoft Word - J20H084.00 user manual |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | eden |
Ambit Microsystems (Shanghai) LTD. No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China Tel :86-21-61206688 Ext:22165 FAX:86-21-57749230 Approval Sheet of J20H084ac Customer Name: Sony Corporation Project Name Approval Sheet Rev. Foxconn Part No. Sony Part No. Prepared by Clon Liu WiFi+BT module 1.0 J20H084.00 Reviewed by Eddie Huang Approved by CONTENTS REVISION HISTORY ..................................................................... 4 MANUFACTURING INFORMATION ........................................................ 5 PRODUCT OVERVIEW ................................................................... 6 3.1 3.2 MODULE HARDWARE OVERVIEW ........................................................ 7 4.1 4.2 4.3 ABSOLUTE MAXIMUM RATING ............................................................. 9 RECOMMENDED OPERATING RATING ....................................................... 9 DC CHARACTERISTICS .................................................................. 9 ESD INFORMATION ..................................................................... 9 ENVIRONMENT STORAGE CONDITION ....................................................... 9 RF SPECIFICATION .................................................................... 10 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 BLOCK DIAGRAM ....................................................................... 7 FEATURES ............................................................................ 7 INTERFACE AND CONNECTOR ............................................................. 7 ELECTRICAL SPECIFICATION ............................................................ 9 5.1 5.2 5.3 5.4 5.5 APPLICATION SCOPE .................................................................... 6 REGULATION OF EACH COUNTRIES ...................................... 錯誤! 尚未定義書籤。 IEEE802.11B ........................................................................ 10 IEEE802.11G ........................................................................ 11 IEEE 802.11N HT20 .................................................................. 12 IEEE 802.11A ........................................................................ 14 IEEE 802.11AN HT20 ................................................................. 15 IEEE 802.11AN HT40 ................................................................. 16 IEEE 802.11AC VHT20 ................................................................ 17 IEEE 802.11AC VHT40 ................................................................ 18 IEEE 802.11AC VHT80 ................................................................ 19 BLUETOOTH 3.0 ....................................................................... 20 ANTENNA ELECTRICAL SPECIFICATION..................................................... 22 MECHANICAL SPECIFICATIONS......................................................... 23 7.1 7.2 7.3 SHIELDING COVER DIMENSION ........................................................... 23 PCB ASSEMBLY DIMENSION ............................................................. 25 MOUNT POSITION OF MATERIALS ....................................... 錯誤! 尚未定義書籤。 SCHEMATICS ......................................................... 錯誤! 尚未定義書籤。 LAYOUT PATTERN .................................................... 錯誤! 尚未定義書籤。 9.1 9.2 MAIN PCB LAYOUT .................................................. 錯誤! 尚未定義書籤。 ANTENNA PCB LAYOUT ............................................... 錯誤! 尚未定義書籤。 10 BOM (BILL OF MATERIALS) ............................................ 錯誤! 尚未定義書籤。 11 LABEL INFORMATION ................................................. 錯誤! 尚未定義書籤。 11.1 12 MAC ID LABEL (FOR PVT, MP) ........................................ 錯誤! 尚未定義書籤。 PACKAGE AND STACK INFORMATION ................................. 錯誤! 尚未定義書籤。 12.1 12.2 12.3 CARTON ASSY ..................................................... 錯誤! 尚未定義書籤。 PALLET ASSY ...................................................... 錯誤! 尚未定義書籤。 TRAY ID LABEL ..................................................... 錯誤! 尚未定義書籤。 12.4 12.5 CARTON LABEL ..................................................... 錯誤! 尚未定義書籤。 PALLET LABEL ...................................................... 錯誤! 尚未定義書籤。 13 RELIABILITY TEST PLAN .............................................. 錯誤! 尚未定義書籤。 14 ESD TEST REPORT ................................................... 錯誤! 尚未定義書籤。 15 NOTIFICATION ........................................................ 錯誤! 尚未定義書籤。 1 Revision History Date Document revision 2014/02/19 1.0 Change Description Initial release 2 Manufacturing Information Manufacture Country: Made in China Manufacturer: Ambit Microsystems (Shanghai) LTD. Manufacture Address: No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China 3 Product Overview The J20H084.00 802.11a/b/g/n/ac 2X2 and BT4.0+LE module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technology. This module is based on MTK MT7662U solution .It fully complies with IEEE 802.11n,IEEE 802.11 a/b/g and ,IEEE 802.11 ac standards, Bluetooth v2.1+EDR, V4.0 standard, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor. 3.1 Application scope The wireless LAN is compliant to IEEE 802.11n,IEEE 802.11 a/b/g and IEEE 802.11 ac standards. Channel Spacing 2.4GHz -> 5MHz, 5GHz-> 20MHz (BW on 20MHz),40MHz (BW on 40MHz) Data rate: 1, 2, 5.5, 11Mbps for 802.11b; 6, 9, 12, 18, 24, 36, 48 and 54Mbps for 802.11a/g; MCS0(6.5Mbps)~MCS7(72.2Mbps) for 802.11n HT20 mode (single chain); MCS0(13Mbps)~MCS15(144.4Mbps) for 802.11n HT20 mode (dual chains); MCS0(13Mbps)~MCS7(150Mbps) for 802.11n HT40 (5G only) mode (single chain); MCS0(26Mbps)~MCS15(300Mbps) for 802.11n HT40 (5G only) mode (dual chains); MCS0(6.5Mbps)~MCS8(86.7Mbps) for 802.11ac VHT20 mode (single chain); MCS0(13Mbps)~MCS8(173.3Mbps) for 802.11ac VHT20 mode (dual chains); MCS0(13.5Mbps)~MCS9(200Mbps) for 802.11ac VHT40 mode (single chain); MCS0(27Mbps)~MCS9(400Mbps) for 802.11ac VHT40 mode (dual chains); MCS0(32.5Mbps)~MCS9(433.3Mbps) for 802.11ac VHT80 mode (single chain); MCS0(65Mbps)~MCS9(866.6Mbps) for 802.11ac VHT80 mode (dual chains); BT: The BT Module is compliant to Bluetooth 4.0 and EDR standard: Carrier Frequency: 2402MHz ~ 2480 MHz Carrier Spacing: 1.0MHz (classic), 2MHz (LE) Duplexing: TDD Modulation: FHSS 1Mbps (GFSK), 2Mbps (π/4-DQPSK), 3Mbps (8DPSK),LE (GFSK) 4 Module Hardware Overview 4.1 Block Diagram NA 4.2 Features ♦ ♦ ♦ ♦ ♦ ♦ IEEE802.11a/b/g/n/ac (2X2) based on MTK MT7662U solution. Support BT4.0+LE USB 2.0 Interface, High and Full Speeds supported. Module is powered by the host with a 3.3V +/- 5% supply. External PCB printed antennas. 4 layers through hole PCB design with FR4 material 4.3 Interface and Connector ♦ Pin definition: ♦ Vendor: JST ♦ Vendor P/N: SM15B-GHS-TB Pin Number Symbol Name UART_RX UART_TX GND RST_L WOW_H Status Input Output Input Output WOBT_H Output Pin definition UART_RX for BT UART_TX for BT Ground “L”-drive reset signal input from Host. Wake on WLAN signal output. “H”-drive is hoped when awake Host. Wake on Bluetooth signal output. “H”-drive is hoped when awake Host. 7 10 11 12 13 14 15 S1 S2 GND DM DP GND VSYNC GND GND VCC VCC I/O I/O Input PWR PWR (old: Host_wake) Ground USB_DATAUSB_DATA+ Shield Ground 3D Video sync Signal Ground Ground DC 3.3V DC 3.3V Ground Ground 5 Electrical Specification 5.1 Absolute maximum rating Symbol UV+ Element DC supply voltage 5.2 5.4 Symbol UV+ Min 2.97 Max 3.65 Unit (V) Typ 3.3 Max 3.63 Unit (V) DC Characteristics Symbol Parameter Min Typ. Max Unit 2.97 3.3 470 440 580 3.63 (V) (mA) (mA) UV+ Supply voltage 2.412GHz Tx Current(1M/16dBm) 2.412GHz Tx Current(MCS0/15dBm) 5.18GHz Tx Current(6M/13Bm/HT20) 5.19GHz Tx Current(MCS0/13dBm/HT40) Rx Current 5.21GHz Tx Current(MCS9/11dBm/VHT80) (mA) 560 (mA) 450 (mA) (mA) ESD Information Mode HBM 5.5 Typ 3.3 Recommended operating rating Element DC supply voltage 5.3 Min Level +/-1000 Unit Environment Storage Condition Environment condition Temperature Humidity Operating Temperature: -10 deg.C ~60 deg.C Storage Temperature: -40 deg.C ~85 deg.C Operating Humidity: 20% ~90% Storage Humidity: 20% ~90% 6 RF Specification 6.1 IEEE802.11b Items Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@1Mbps 2) Target Power@2Mbps 3) Target Power@5.5Mbps 4) Target Power@11Mbps 2. Spectrum Mask @15dBm 1) fc-33MHz ＜ f ＜ fc-22MHz 2) fc-22MHz ＜ f ＜ fc-11MHz 3) fc+11MHz ＜ f ＜ fc+22MHz 4) fc+22MHz ＜ f ＜ fc+33MHz 3. Frequency Error@25℃ 4 Modulation Accuracy(EVM)@15dBm 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps RX Characteristics 5 Minimum Input Level Sensitivity 1) 1Mbps (FER≦8%) 2) 2Mbps (FER≦8%) 3) 5.5Mbps (FER≦8%) 4) 11Mbps (FER≦8%) 6 Maximum Input Level (FER≦8%) Contents Min. IEEE802.11b DSSS / CCK CH1 to CH13 1, 2, 5.5, 11Mbps Typ. Max. Unit 14.5 14.5 14.5 14.5 16 16 16 16 17.5 17.5 17.5 17.5 dBm dBm dBm dBm -5 -50 -30 -30 -50 +5 dBr dBr dBr dBr ppm Typ. -10 -10 -10 -10 Max. dB dB dB dB Unit -95 -91 -90 -89 -91 -88 -87 -85 dBm dBm dBm dBm dBm Min. -10 10 6.2 IEEE802.11g Items Contents Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@6Mbps 2) Target Power@9Mbps 3) Target Power@12Mbps 4) Target Power@18Mbps 5) Target Power@24Mbps 6) Target Power@36Mbps 7) Target Power@48Mbps 8) Target Power@54Mbps 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3 Modulation Accuracy(EVM)@15dBm 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4 Frequency Error@25℃ RX Characteristics 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6 Maximum Input Level (PER < 10%) Min. 11 IEEE802.11g OFDM CH1 to CH13 6, 9, 12, 18, 24, 36, 48, 54Mbps Typ. Max. Unit 13.5 13.5 13.5 13.5 12.5 12.5 12.5 12.5 15 15 15 15 14 14 14 14 16.5 16.5 16.5 16.5 15.5 15.5 15.5 15.5 dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -40 dBr dBr dBr -5 Min. -28 Typ. -5 -8 -10 -13 -16 -19 -22 -25 +5 Max. dB dB dB dB dB dB dB dB ppm Unit -20 -92 -91 -90 -87 -85 -80 -77 -75 -11 -83 -81 -79 -77 -75 -73 -71 -69 dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.3 IEEE 802.11n HT20 Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @14dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@14dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error@25℃ RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) Min. 12 IEEE802.11n HT20 OFDM CH1 and CH11~CH13 MCS0/1/2/3/4/5/6/7 Typ. Max. Unit 13.5 13.5 13.5 13.5 12.5 12.5 12.5 12.5 15 15 15 15 14 14 14 14 16.5 16.5 16.5 16.5 15.5 15.5 15.5 15.5 dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -45 dBr dBr dBr -5 Min. Typ. -5 -10 -13 -16 -19 -22 -25 -28 +5 Max. dB dB dB dB dB dB dB dB ppm Unit -20 -91 -89 -87 -84 -80 -75 -74 -72 -10 -81 -79 -77 -75 -73 -71 -69 -67 dBm dBm dBm dBm dBm dBm dBm dBm dBm Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error@25℃ RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) Min. 13 IEEE802.11n HT20 OFDM CH2 to CH10 MCS0/1/2/3/4/5/6/7 Typ. Max. Unit 13.5 13.5 13.5 13.5 12.5 12.5 12.5 12.5 15 15 15 15 14 14 14 14 16.5 16.5 16.5 16.5 15.5 15.5 15.5 15.5 dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -45 dBr dBr dBr -5 Min. Typ. -5 -10 -13 -16 -19 -22 -25 -28 +5 Max. dB dB dB dB dB dB dB dB ppm Unit -20 -91 -89 -87 -84 -80 -75 -74 -72 -10 -81 -79 -77 -75 -73 -71 -69 -67 dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.4 IEEE 802.11a Items Contents Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@6Mbps 2) Target Power@9Mbps 3) Target Power@12Mbps 4) Target Power@18Mbps 5) Target Power@24Mbps 6) Target Power@36Mbps 7) Target Power@48Mbps 8) Target Power@54Mbps 2. Spectrum Mask @12dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3 Modulation Accuracy(EVM)@12dBm 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4 Frequency Error@25℃ RX Characteristics 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6 Maximum Input Level (PER < 10%) Min. 14 IEEE802.11a OFDM CH36 to CH165 6, 9, 12, 18, 24, 36, 48, 54Mbps Typ. Max. Unit 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5 13 13 13 13 12 12 12 12 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5 dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -40 dBr dBr dBr -5 Min. -28 Typ. -5 -8 -10 -13 -16 -19 -22 -25 +5 Max. dB dB dB dB dB dB dB dB ppm Unit -20 -92 -91 -90 -87 -85 -80 -77 -75 -11 -83 -81 -79 -77 -75 -73 -71 -69 dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.5 IEEE 802.11an HT20 Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @12dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@12dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error@25℃ RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) Min. 15 IEEE802.11an HT20 OFDM CH36 to CH165 MCS0/1/2/3/4/5/6/7 Typ. Max. Unit 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5 13 13 13 13 12 12 12 12 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5 dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -45 dBr dBr dBr -5 Min. Typ. -5 -10 -13 -16 -19 -22 -25 -28 +5 Max. dB dB dB dB dB dB dB dB ppm Unit -20 -91 -89 -87 -84 -80 -75 -74 -72 -10 -81 -79 -77 -75 -73 -71 -69 -67 dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.6 IEEE 802.11an HT40 Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @12dBm 1) at fc +/- 21MHz 2) at fc +/- 40MHz 3) at fc > +/-60MHz 3. Modulation Accuracy(EVM)@12dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error@25℃ RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) Min. 16 IEEE802.11an HT40 OFDM CH38 to CH159 MCS0/1/2/3/4/5/6/7 Typ. Max. Unit 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 12 12 12 12 12 12 12 12 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -45 dBr dBr dBr -5 Min. Typ. -5 -10 -13 -16 -19 -22 -25 -28 +5 Max. dB dB dB dB dB dB dB dB ppm Unit -20 -88 -86 -84 -81 -77 -72 -71 -69 -10 -78 -76 -74 -72 -70 -68 -66 -64 dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.7 IEEE 802.11ac VHT20 Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 9) Target Power@ MCS8 2. Spectrum Mask @11dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@11dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 4. Frequency Error@25℃ RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 8) MCS8 (PER < 10%) 6. Maximum Input Level (PER < 10%) Min. 17 IEEE802.11ac VHT20 OFDM CH36 to CH165 MCS0/1/2/3/4/5/6/7/8 Typ. Max. Unit 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5 9.5 13 13 13 13 12 12 12 12 11 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5 12.5 dBm dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -45 dBr dBr dBr -5 Min. Typ. -5 -10 -13 -16 -19 -22 -25 -27 -30 +5 Max. dB dB dB dB dB dB dB dB dB ppm Unit -20 -91 -89 -87 -84 -80 -75 -74 -72 -63 -10 -81 -79 -77 -75 -73 -71 -69 -67 -58 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.8 IEEE 802.11ac VHT40 Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 9) Target Power@ MCS8 10) Target Power@ MCS9 2. Spectrum Mask @11dBm 1) at fc +/- 21MHz 2) at fc +/- 40MHz 3) at fc > +/- 60MHz 3. Modulation Accuracy(EVM)@11dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error@25℃ RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 7) MCS8 (PER < 10%) 8) MCS9 (PER < 10%) 6. Maximum Input Level (PER < 10%) Min. 18 IEEE802.11ac VHT40 OFDM CH38 to CH159 MCS0/1/2/3/4/5/6/7/8/9 Typ. Max. Unit 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5 9.5 9.5 13 13 13 13 12 12 12 12 11 11 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5 12.5 12.5 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -45 dBr dBr dBr -5 Min. Typ. -5 -10 -13 -16 -19 -22 -25 -27 -30 -32 +5 Max. dB dB dB dB dB dB dB dB dB dB ppm Unit -20 -88 -86 -84 -81 -77 -72 -71 -69 -64 -60 -10 -78 -76 -74 -72 -70 -68 -66 -64 -59 -57 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.9 IEEE 802.11ac VHT80 Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@ MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 9) Target Power@ MCS8 10) Target Power@ MCS9 2. Spectrum Mask @11dBm 1) at fc +/- 41MHz 2) at fc +/- 80MHz 3) at fc > +/- 120MHz 3. Modulation Accuracy(EVM)@11dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error@25℃ RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 9) MCS8 (PER < 10%) 10) MCS9 (PER < 10%) 6. Maximum Input Level (PER < 10%) Min. 19 IEEE802.11ac VHT80 OFDM CH42 to CH155 MCS0/1/2/3/4/5/6/7/8/9 Typ. Max. Unit 11.5 11.5 11.5 11.5 10.5 10.5 10.5 10.5 9.5 9.5 13 13 13 13 12 12 12 12 11 11 14.5 14.5 14.5 14.5 13.5 13.5 13.5 13.5 12.5 12.5 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -45 dBr dBr dBr -5 Min. Typ. -5 -10 -13 -16 -19 -22 -25 -27 -30 -32 +5 Max. dB dB dB dB dB dB dB dB dB dB ppm Unit -20 -80 -78 -76 -74 -72 -70 -68 -66 -63 -59 -10 -75 -73 -71 -69 -67 -65 -63 -61 -58 -54 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.10 Bluetooth 3.0 BT specification BDR TX PERFORMANCE PARAMETER DESCRIPTION MIN TYP MAX Unit 2402 2480 MHz -1 dBm dB Δf1avg 140 157 175 KHz Δf2max(For at least 99.9% of allΔ f2max) 115 140 KHz Δf1avg/Δf2avg 0.8 0.98 KHz Initial carrier frequency tolerance -25 25 KHz One slot packet(DH1) -25 25 KHz Three slot packet(DH3) -40 40 KHz Five slot packet(DH5) -40 40 KHz Max drift -20 20 KHz/50us Frequency range Output power At maximum power output level Gain step Modulation characteristics ICFT Carrier frequency drift TX output spectrum In-Band spurious emission 20dB bandwidth 922 1000 KHz ±2MHz offset -45 -20 dBm ±3MHz offset -48 -40 >±3MHz offset -48 -40 dBm dBm BDR RX PERFORMANCE PARAMETER DESCRIPTION Frequency range MIN TYP MAX Unit 2402 2480 MHz -80 dBm Receiver sensitivity BER<0.1% -93.5 Maximum usable signal BER<0.1% -5 C/I co-channel (BER<0.1%) Co channel selectivity 11 dB C/I 1MHz (BER<0.1%) Adjacent channel selectivity -14 dB C/I 2MHz (BER<0.1%) 2nd adjacent channel selectivity -42 -30 dB C/I >=3 MHz (BER<0.1%) 3rd adjacent channel selectivity -49 -40 dB C/I Image channel (BER<0.1%) Image channel selectivity -25 -9 dB C/I Image 1MHz (BER<0.1%) 1MHz adjacent to image channel selectivity -50 -20 dB Inter-modulation Out-of-band blocking -13 dBm dBm 30MHz to 2000MHz -10 dBm 2000MHz to 2399MHz -27 dBm 2498MHz to 3000MHz -27 dBm 3000MHz to 12.75GHz -10 dBm 20 EDR TX EDR RX 21 LE TX LE RX 6.11 Antenna Electrical Specification WiFi: Ant.1 Ant.2 Frequency Peak Peak Gain Gain (dBi) (dBi) 2.40GHz 3.54dBi 3.06dBi 2.45GHz 4.40dBi 3.12dBi WiFi 2.50GHz 3.90dBi 3.19dBi antenna 5.15GHz 7.45dBi 7.63dBi 5.45GHz 6.20dBi 6.99dBi 5.85GHz 7.63dBi 7.87dBi BT: Frequency 2.40GHz BT 2.45GHz antenna 2.50GHz Cable Length: 500mm Peak Gain (dBi) 3.45dBi 3.53dBi 3.27dBi 22 7 Mechanical Specifications 7.1 Shielding Cover Dimension Dimension (LxWxH): 22.44mm x 27.66mm x 1.5mm Thickness: 0.2mm 23 7.2 Shielding frame Dimension Dimension (LxWxH): 22.04mm x 27.26mm x 1.5mm Thickness: 0.1mm 24 7.3 PCB Assembly Dimension Dimension (W x Lx H ): 80mmx25mmx1.0mm PCB: 4 layer FR4 design Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 25 ! 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 2878D.J20H084AC”. 2878DJ20H084AC”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878DJ20H084AC". 2878D.J20H084AC”. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. 37! ! Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC 38! ! ID: ID: AK8J20H084AC”. MCLJ20H084AC”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. For Taiwan ᤞΚ!(ሽॾጥࠫ୴᙮ᕴ)شࠌޗ ᆖীڤᎁᢞٽհפ܅୴᙮ሽᖲΔॺᆖױΔֆΕᇆࢨࠌ݁ृشլᖐ۞᧢ޓ᙮! ΕףՕפࢨ᧢ޓૠհࢤ֗פ౨Ζ! פ܅୴᙮ሽᖲհࠌشլᐙଆڜ٤֗եឫٽऄຏॾΙᆖ࿇ڶեឫွழΔᚨ!م ܛೖشΔࠀޏ۟ྤեឫழֱᤉᥛࠌشΖছႈٽऄຏॾΔਐࠉሽॾऄࡳ܂ᄐհྤᒵ! ሽຏॾΖפ܅୴᙮ሽᖲႊٽ࠹ݴऄຏॾࢨՠᄐΕઝᖂ֗᠔᛭شሽंᘿ୴ࢤሽᖲໂհ! եឫΖ! Note: 1. ءᑓิ࣍࠷ᎁᢞ৵ലࠉࡳ࣍ᑓิ᧯ءᑑقᐉ᧭ٽᑑ᧘!2. ߓอᐗᚨ࣍ؓ! Ղᑑقψءขփܶ୴᙮ᑓิ: XXXyyyLPDzzzz-x (NCC ID) ωڗᑌ! Europe – EU Declaration of Conformity ThisdevicecomplieswiththeessentialrequirementsoftheR&TTEDirective1999/5/EC.Thefollowingtestmethodshavebeen appliedinordertoprovepresumptionofconformitywiththeessentialrequirementsoftheR&TTEDirective1999/5/EC: EN609501:2006+A11:2009+A1:2010+A12:2011 SafetyofInformationTechnologyEquipment EN62311:2008 Assessmentofelectronicandelectricalequipmentrelatedtohumanexposurerestrictionsforelectromagneticfields(0 Hz300GHz) (IEC62311:2007(Modified)) EN300328V1.7.1:2006 ElectromagneticcompatibilityandRadiospectrumMatters(ERM);WidebandTransmissionsystems;Datatransmission equipmentoperatinginthe2,4GHzISMbandandusingspreadspectrummodulationtechniques;HarmonizedENcovering essentialrequirementsunderarticle3.2oftheR&TTEDirective EN3014891V1.8.1:2008 ElectromagneticcompatibilityandRadioSpectrumMatters(ERM);ElectroMagneticCompatibility(EMC)standardforradio equipmentandservices;Part1:Commontechnicalrequirements EN30148917V2.1.12009 ElectromagneticcompatibilityandRadiospectrumMatters(ERM);ElectroMagneticCompatibility(EMC)standardforradio equipmentandservices;Part17:Specificconditionsfor2,4GHzwidebandtransmissionsystemsand5GHzhighperformance RLANequipment NationalAuthoritieswereinformedaccordingtoArticle6.4ofFrequencyNotification. SpecialRequirementsareconsidered.TheproductislabeledwithCEMarking. 39! 29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2014:07:23 10:18:12+08:00 Create Date : 2014:07:22 08:57:59+08:00 Metadata Date : 2014:07:23 10:18:12+08:00 Format : application/pdf Title : Microsoft Word - J20H084.00 user manual Creator : eden Document ID : uuid:5c9bdff1-1753-4192-b0c9-6611c8272b74 Instance ID : uuid:1bf482a0-744f-4570-abda-f04fb480fbbc Page Count : 29 Author : edenEXIF Metadata provided by EXIF.tools