Sony Group MEXBT2800 Bluetooth Audio System User Manual 06 UserManual

Sony Corporation Bluetooth Audio System 06 UserManual

User Manual

$©2009 Sony CorporationOperating Instructions Mode d’emploi Owner’s RecordThe model and serial numbers are located on the bottom of the unit.Record the serial number in the space provided below.Refer to these numbers whenever you call upon your Sony dealer regarding this product.Model No. MEX-BT2800 Serial No. To cancel the demonstration (DEMO) display, see page 8.Pour annuler l’affichage de démonstration (DEMO), reportez-vous à la page 5.masterpage:RightE:\DATA\4157841111\4157841111MEXBT2800U\01US+00COV-U.fmFRUS4-157-841-11(1)MEX-BT28004-157-841-11(1)MEX-BT2800Bluetooth®Audio System00US+00COV-U.book Page 1 Wednesday, July 22, 2009 1:27 PM1ST CHECKFROM YAMAGATA INTECHpage 5.$

$©2009 Sony CorporationOperating Instructions Bedienungsanleitung Mode d’emploi Istruzioni per l’uso Gebruiksaanwijzing To cancel the demonstration (DEMO) display, see page 8.Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 5 nach.Pour annuler la démonstration (DEMO), reportez-vous à la page 5.Per annullare la dimostrazione (DEMO), vedere pagina 5.Om de demonstratie (DEMO) te annuleren, zie pagina 5.masterpage:RightE:\DATA\4157841111\4157841111MEXBT2800U\01GB+00COV-EUR.fmDEGB4-157-841-21(1)MEX-BT2800FRITNLMEX-BT28004-157-841-21(1)Bluetooth®Audio System00US+00COV-U.book Page 1 Wednesday, July 22, 2009 1:27 PM5 nach.page 5.pagina 5.pagina 5.$

$©2010 Sony CorporationOperating Instructions Manual de instrucciones To cancel the demonstration (DEMO) display, see page 8.Para cancelar la pantalla de demostración (DEMO), consulte la página 5.masterpage:RightE:\DATA\4157841111\4157841111MEXBT2800U\01GB+00COV-E.fmESGB4-157-841-41(1)MEX-BT2850MEX-BT28504-157-841-41(1)Bluetooth®Audio System00US+00COV-U.book Page 1 Wednesday, July 22, 2009 1:27 PMpágina 5.$

$2E:\DATA\4157841111\4157841111MEXBT2800U\01US01INT-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)WarningThe nameplate indicating operating voltage, etc., is located on the bottom of the chassis.Be sure to install this unit in the dashboard of the car for safety. For installation and connections, see the supplied installation/connections manual.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.You are cautioned that any changes ormodifications not expressly approved in thismanual could void your authority to operate thisequipment.FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.CAUTIONThe use of optical instruments with this product will increase eye hazard.This equipment complies with FCC and IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and ankles).This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.For the State of California, USA onlyPerchlorate Material – special handling may apply,See www.dtsc.ca.gov/hazardouswaste/perchloratePerchlorate Material: Lithium battery contains perchlorateThis label is located on the bottom of the chassis.This label is located on the bottom of the chassis.00US+00COV-U.book Page 2 Wednesday, July 22, 2009 1:27 PM$

$3E:\DATA\4157841111\4157841111MEXBT2800U\01US01INT-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Hereby, Sony Corp., declares that this MEX-BT2800 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.For details, please access the following URL:http://www.compliance.sony.de/Use of this radio equipment is not allowed in the geographical area within a radius of 20 km from the centre of Ny-Alesund, Svalbard in Norway. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.This equipment complies with FCC and IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet and ankles).Notice for customers: the following information is only applicable to equipment sold in countries applying EU DirectivesThe manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.The “HD Radio Ready” logo indicates that this product will control a Sony HD RadioTM tuner (sold separately).For HD RadioTM tuner operation, please refer to the HD RadioTM tuner Operating Instructions.HD RadioTM and the HD Radio Ready logo are proprietary trademarks of iBiquity Digital Corp.The “SAT Radio Ready” logo indicates that this product will control a satellite radio tuner module (sold separately). Please see your nearest authorized Sony dealer for details on the satellite radio tuner module.“SAT Radio,” “SAT Radio Ready,” the SAT Radio and SAT Radio Ready logos and all related marks are trademarks of Sirius XM Radio Inc. and XM Satellite Radio Inc.Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.Note on the lithium batteryDo not expose the battery to excessive heat such as direct sunlight, fire or the like.Note on the lithium batteryDo not expose the battery to excessive heat such as direct sunlight, fire or the like.00US+00COV-U.book Page 3 Wednesday, July 22, 2009 1:27 PM$

$4E:\DATA\4157841111\4157841111MEXBT2800U\01US01INT-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Warning if your car’s ignition has no ACC positionBe sure to set the Auto Off function (page 27).The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain.If you do not set the Auto Off function, press and hold (SOURCE/OFF) until the display disappears each time you turn the ignition off.Warning if your car’s ignition has no ACC positionBe sure to set the Auto Off function (page 27).The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain.If you do not set the Auto Off function, press and hold (SOURCE/OFF) until the display disappears each time you turn the ignition off.Warning if your car’s ignition has no ACC positionBe sure to set the Auto Off function (page 28).The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain.If you do not set the Auto Off function, press and hold (SOURCE/OFF) until the display disappears each time you turn the ignition off.00US+00COV-U.book Page 4 Wednesday, July 22, 2009 1:27 PM$

$5E:\DATA\4157841111\4157841111MEXBT2800U\01US+00COV-UTOC.fm masterpage:RightTable of ContentsMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Getting StartedPlayable discs on this unit . . . . . . . . . . . . . . . . . 7Notes on Bluetooth . . . . . . . . . . . . . . . . . . . . . . 7Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 7Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 7Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 8Canceling the DEMO mode . . . . . . . . . . . . . . . 8Preparing the card remote commander . . . . . . . 8Preparing the card remote commander . . . . . . . 8Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 8Detaching the front panel . . . . . . . . . . . . . . . . . 8Attaching the front panel . . . . . . . . . . . . . . . 9Location of controls and basic operationsMain unit. . . . . . . . . . . . . . . . . . . . . . . . . . . 10Card remote commander RM-X304 . . . . . . 12Location of controls and basic operationsMain unit. . . . . . . . . . . . . . . . . . . . . . . . . . . 13Location of controls and basic operationsMain unit. . . . . . . . . . . . . . . . . . . . . . . . . . . 15Card remote commander RM-X304 . . . . . . 17RadioStoring and receiving stations . . . . . . . . . . . . . 18Storing automatically — BTM . . . . . . . . . . 18Storing manually. . . . . . . . . . . . . . . . . . . . . 18Receiving the stored stations . . . . . . . . . . . 18Tuning automatically . . . . . . . . . . . . . . . . . 18RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 18Selecting PTY . . . . . . . . . . . . . . . . . . . . . . . 19Setting CT . . . . . . . . . . . . . . . . . . . . . . . . . . 19RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 19Setting AF and TA . . . . . . . . . . . . . . . . . . . 20Selecting PTY . . . . . . . . . . . . . . . . . . . . . . . 20Setting CT . . . . . . . . . . . . . . . . . . . . . . . . . . 20RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 21Selecting PTY . . . . . . . . . . . . . . . . . . . . . . . 21Setting CT . . . . . . . . . . . . . . . . . . . . . . . . . . 21CDDisplay items . . . . . . . . . . . . . . . . . . . . . . . 22Repeat and shuffle play . . . . . . . . . . . . . . . 22Bluetooth (Handsfree calling and Music streaming)Bluetooth operations . . . . . . . . . . . . . . . . . . . . 23Pairing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23About Bluetooth icons . . . . . . . . . . . . . . . . 24Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 24To switch the Bluetooth signal output of this unit to on . . . . . . . . . . . . . . . . . . . . . . . . . . 24Connecting a cellular phone. . . . . . . . . . . . 24Connecting an audio device . . . . . . . . . . . . 24Handsfree calling . . . . . . . . . . . . . . . . . . . . . . 24Receiving calls . . . . . . . . . . . . . . . . . . . . . . 24Making calls . . . . . . . . . . . . . . . . . . . . . . . . 25Call transfer . . . . . . . . . . . . . . . . . . . . . . . . 25Voice Dial Activation . . . . . . . . . . . . . . . . 25Music streaming . . . . . . . . . . . . . . . . . . . . . . . 25Listening to music from an audio device . . 25Operating an audio device with this unit . . 26Deleting registration of all paired devices . . . 26Other functionsChanging the sound settings . . . . . . . . . . . . . . 26Adjusting the sound characteristics . . . . . . 26Customizing the equalizer curve — EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Adjusting setup items — SET . . . . . . . . . . . . 27Using optional equipment. . . . . . . . . . . . . . . . 29Auxiliary audio equipment. . . . . . . . . . . . . 29Card remote commander RM-X114. . . . . . 29Additional InformationPrecautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Notes on discs . . . . . . . . . . . . . . . . . . . . . . 30Playback order of MP3/WMA files . . . . . . 30About MP3 files . . . . . . . . . . . . . . . . . . . . . 30About WMA files. . . . . . . . . . . . . . . . . . . . 30About Bluetooth function. . . . . . . . . . . . . . 31Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 31Removing the unit. . . . . . . . . . . . . . . . . . . . . . 32Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 33Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 35Error displays/Messages. . . . . . . . . . . . . . . 4100US+00COV-U.book Page 5 Wednesday, July 22, 2009 1:27 PMCard remote commander RM-X114. . . . . . 29Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 7Resetting the unit . . . . . . . . . . . . . . . . . . . . . . . . 7Preparing the card remote commander . . . . . . . 8Resetting the unit . . . . . . . . . . . . . . . . . . . . . . . . 8Preparing the card remote commander . . . . . . . 8$

$6E:\DATA\4157841111\4157841111MEXBT2800U\01US+00COV-UTOC.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Support siteIf you have any questions or for the latest support information on this product, please visit the web site below:http://esupport.sony.comhttp://www.xplodsony.com/Provides information on:• Models and manufacturers of compatible cellular phones and the FAQ about Bluetooth functionSupport siteIf you have any questions or for the latest support information on this product, please visit the web site below:http://support.sony-europe.com/Provides information on:• Models and manufacturers of compatible cellular phones and the FAQ about Bluetooth functionSupport siteIf you have any questions or for the latest support information on this product, please visit the web site below:Customers in Latin America:http://esupport.sony.com/ES/LA/Customers in Pan Asia:http://www.sony-asia.com/section/supporthttp://www.sony-asia.com/caraudio/Provides information on:• Models and manufacturers of compatible cellular phones and the FAQ about Bluetooth function00US+00COV-U.book Page 6 Wednesday, July 22, 2009 1:27 PM$

$7E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Getting StartedPlayable discs on this unitThis unit can play CD-DA (also containing CD TEXT) and CD-R/CD-RW (MP3/WMA files (page 30)).Notes on BluetoothCautionIN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.IMPORTANT NOTICE! Safe and efficient useChanges or modifications to this unit not expressly approved by Sony may void the user’s authority to operate the equipment.Please check for exceptions, due to national requirement or limitations, in usage of Bluetooth equipment before using this product.DrivingCheck the laws and regulations on the use of cellular phones and handsfree equipment in the areas where you drive.Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require.Connecting to other devicesWhen connecting to any other device, please read its user guide for detailed safety instructions.Radio frequency exposureRF signals may affect improperly installed or inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation or service of this device, please consult with the manufacturer or its representative of your car. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to this device.Consult with the manufacturer of your car to ensure that the use of your cellular phone in the car will not affect its electronic system.Check regularly that all wireless device equipment in your car is mounted and operating properly.Emergency callsThis Bluetooth car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions.Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies).Remember, in order to make or receive calls, the handsfree and the electronic device connected to the handsfree must be switched on in a service area with adequate cellular signal strength.Emergency calls may not be possible on all cellular phone networks or when certain network services and/or phone features are in use.Check with your local service provider.Resetting the unitBefore operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.Detach the front panel (page 8) and press the RESET button (page 10) with a pointed object, such as a ball-point pen.NotePressing the RESET button will erase the clock setting and some stored contents.Resetting the unitBefore operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.Detach the front panel (page 8) and press the RESET button (page 13) with a pointed object, such as a ball-point pen.NotePressing the RESET button will erase the clock setting and some stored contents.Type of discs Label on the discCD-DAMP3 WMA00US+00COV-U.book Page 7 Wednesday, July 22, 2009 1:27 PM$

$8E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Resetting the unitBefore operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.Detach the front panel (page 8) and press the RESET button (page 15) with a pointed object, such as a ball-point pen.NotePressing the RESET button will erase the clock setting and some stored contents.Canceling the DEMO modeYou can cancel the demonstration display which appears during turning off.1Press and hold the select button.The setup display appears.2Press the select button repeatedly until “DEMO” appears.3Rotate the control dial to select “DEMO-OFF.”4Press and hold the select button.The setup is complete and the display returns to normal reception/play mode.Preparing the card remote commanderRemove the insulation film.TipFor how to replace the battery, see page 31.Preparing the card remote commanderRemove the insulation film.TipFor how to replace the battery, see page 31.Setting the clockThe clock uses a 12-hour digital indication.The clock uses a 24-hour digital indication.The clock uses a 12-hour digital indication.1Press and hold the select button.The setup display appears.2Press the select button repeatedly until “CLOCK-ADJ” appears.3Press (SEEK) +.The hour indication flashes.4Rotate the control dial to set the hour and minute.To move the digital indication, press (SEEK) –/+.5After setting the minute, press the select button.The setup is complete and the clock starts.To display the clock, press (DSPL/SCRL). Press (DSPL/SCRL) again to return to the previous display.TipYou can set the clock automatically with the RDS feature (page 19).TipYou can set the clock automatically with the RDS feature (page 20).TipYou can set the clock automatically with the RDS feature (page 21).Detaching the front panelYou can detach the front panel of this unit to prevent theft.Caution alarmIf you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds.The alarm will only sound if the built-in amplifier is used.1Press and hold (SOURCE/OFF).The unit is turned off.2Press , then pull it off towards you.(SOURCE/OFF)00US+00COV-U.book Page 8 Wednesday, July 22, 2009 1:27 PM$

$9E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Notes•Do not drop or put excessive pressure on the front panel and display window.•Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray.Attaching the front panelEngage part A of the front panel with part B of the unit, as illustrated, and push the left side into position until it clicks.NoteDo not put anything on the inner surface of the front panel.BA00US+00COV-U.book Page 9 Wednesday, July 22, 2009 1:27 PM$

$10E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Location of controls and basic operationsMain unitFront panel removedThis section contains instructions on the location of controls and basic operations.For details, see the respective pages.ASEEK +/– buttonsCD:To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast-forward a track (press and hold).Radio:To tune in stations automatically (press); find a station manually (press and hold).Bluetooth audio device*1:To skip tracks (press).BBT (BLUETOOTH) button page 23For Bluetooth signal on/off, pairing.CSOURCE/OFF button*2Press to turn on the power/change the source (Radio/CD/AUX/Bluetooth audio/Bluetooth phone).Press for 1 second to turn off the power.Press for 2 seconds or more to turn off the power and the display disappears.DControl dial/select / (handsfree) buttonTo adjust volume/select search category (rotate); select setup items (press and rotate); receive/end a call (press).EDisc slotInsert the disc (label side up), playback starts.FDisplay windowGAUX input jack page 29To connect a portable audio device.HZ (eject) buttonTo eject the disc.I (front panel release) button page 8JMODE button*2 page 18To select the radio band (FM/AM).KDSPL (display)/SCRL (scroll) button page 18, 22To change display items (press); scroll the display item (press and hold).LPTY/CAT*4 button page 19To select PTY in RDS.PUSHSELECT/ALBUM REPCAT MICSHUF PAUSEAUXSOURCEDSPLSEEK OFFSEEK SCRL123456MODE BTPTY9 qa qs2qfq; qd1 73 4 5 6 8RESETqhqg00US+00COV-U.book Page 10 Wednesday, July 22, 2009 1:27 PM$

$11E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)MNumber buttonsCD:(1)/(2): ALBUM –/+ (during MP3/WMA playback)To skip albums (press); skip albums continuously (press and hold).(3): REP*3 page 22(4): SHUF page 22(6): PAUSETo pause playback. To cancel, press again.Radio:To receive stored stations (press); store stations (press and hold).Bluetooth audio device*1:(6): PAUSETo pause playback. To cancel, press again.Bluetooth phone:(5): MIC page 25NReceptor for the card remote commanderORESET button (located behind the front panel) page 7PMicrophone page 25NoteDo not cover the microphone, the handsfree function may not work properly.*1 When a Bluetooth audio device (supports AVRCP of Bluetooth technology) is connected. Depending on the device, certain operations may not be available.*2 If an HD Radio tuner or SAT tuner is connected: when (SOURCE/OFF) is pressed, the connected device (“HD,” “XM” or “SR”) will appear in the display. Furthermore, if (MODE) is pressed, you can switch the HD Radio tuner band or SAT tuner band.*3 This button has a tactile dot.*4 When the SAT tuner is connected.00US+00COV-U.book Page 11 Wednesday, July 22, 2009 1:27 PM$

$12E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Card remote commander RM-X304Remove the insulation film before use (page 8).AOFF buttonTo turn off; stop the source.BSOURCE button*1To turn on; change the source (Radio/CD/AUX/Bluetooth audio/Bluetooth phone).C< (.)/, (>) buttonsTo control Radio/CD/Bluetooth audio, the same as (SEEK) –/+ on the unit.Setup, sound setting, etc., can be operated by < ,.DDSPL (display) buttonTo change display items.EVOL (volume) +*2/– buttonTo adjust volume.FATT (attenuate) buttonTo attenuate the sound. To cancel, press again.GMODE button*1To select the radio band (FM/AM).HSEL (select)/ (handsfree) buttonThe same as the select button on the unit.IM (+)/m (–) buttonsTo control CD, the same as (1)/(2) (ALBUM –/+) on the unit.Setup, sound setting, etc., can be operated by M m.JSCRL (scroll) buttonTo scroll the display item.KNumber buttonsTo receive stored stations (press); store stations (press and hold).*1 If an HD Radio tuner or SAT tuner is connected: when (SOURCE) is pressed, the connected device (“HD,” “XM” or “SR”) will appear in the display. Furthermore, if (MODE) is pressed, you can switch the HD Radio tuner band or SAT tuner band.*2 This button has a tactile dot.NoteIf the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE/OFF) on the unit is pressed, or a disc is inserted to activate the unit first.OFFDSPL SCRLSELSOURCEMODE132465ATTVOL+–+–287103654qa900US+00COV-U.book Page 12 Wednesday, July 22, 2009 1:27 PM$

$13E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Location of controls and basic operationsMain unitFront panel removedThis section contains instructions on the location of controls and basic operations.For details, see the respective pages.ASEEK +/– buttonsCD:To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast-forward a track (press and hold).Radio:To tune in stations automatically (press); find a station manually (press and hold).Bluetooth audio device*1:To skip tracks (press).BBT (BLUETOOTH) button page 23For Bluetooth signal on/off, pairing.CSOURCE/OFF buttonPress to turn on the power/change the source (Radio/CD/AUX/Bluetooth audio/Bluetooth phone).Press for 1 second to turn off the power.Press for 2 seconds or more to turn off the power and the display disappears.DControl dial/select / (handsfree) buttonTo adjust volume/select search category (rotate); select setup items (press and rotate); receive/end a call (press).EDisc slotInsert the disc (label side up), playback starts.FDisplay windowGAUX input jack page 29To connect a portable audio device.HZ (eject) buttonTo eject the disc.I (front panel release) button page 8JMODE button page 18To select the radio band (FM/MW/LW).KDSPL (display)/SCRL (scroll) button page 19, 22To change display items (press); scroll the display item (press and hold).LAF (Alternative Frequencies)/TA (Traffic Announcement)/PTY (Program Type) button page 20, 20To set AF and TA (press); select PTY (press and hold) in RDS.PUSHSELECT/ALBUM REPPTY SHUF PAUSEAUXSOURCEDSPLSEEK OFFSEEK SCRL123456AF / TAMODE BTMIC9 qa qs2q; qd1 73 4 5 6 8qfRESETqhqg00US+00COV-U.book Page 13 Wednesday, July 22, 2009 1:27 PM$

$14E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)MNumber buttonsCD:(1)/(2): ALBUM –/+ (during MP3/WMA playback)To skip albums (press); skip albums continuously (press and hold).(3): REP*2 page 22(4): SHUF page 22(6): PAUSETo pause playback. To cancel, press again.Radio:To receive stored stations (press); store stations (press and hold).Bluetooth audio device*1:(6): PAUSETo pause playback. To cancel, press again.Bluetooth phone:(5): MIC page 25NReceptor for the card remote commanderORESET button (located behind the front panel) page 7PMicrophone page 25NoteDo not cover the microphone, the handsfree function may not work properly.*1 When a Bluetooth audio device (supports AVRCP of Bluetooth technology) is connected. Depending on the device, certain operations may not be available.*2 This button has a tactile dot.00US+00COV-U.book Page 14 Wednesday, July 22, 2009 1:27 PM$

$15E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Location of controls and basic operationsMain unitFront panel removedThis section contains instructions on the location of controls and basic operations.For details, see the respective pages.ASEEK +/– buttonsCD:To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast-forward a track (press and hold).Radio:To tune in stations automatically (press); find a station manually (press and hold).Bluetooth audio device*1:To skip tracks (press).BBT (BLUETOOTH) button page 23For Bluetooth signal on/off, pairing.CSOURCE/OFF buttonPress to turn on the power/change the source (Radio/CD/AUX/Bluetooth audio/Bluetooth phone).Press for 1 second to turn off the power.Press for 2 seconds or more to turn off the power and the display disappears.DControl dial/select / (handsfree) buttonTo adjust volume/select search category (rotate); select setup items (press and rotate); receive/end a call (press).EDisc slotInsert the disc (label side up), playback starts.FDisplay windowGAUX input jack page 29To connect a portable audio device.HZ (eject) buttonTo eject the disc.I (front panel release) button page 8JMODE button page 18To select the radio band (FM/MW/SW).KDSPL (display)/SCRL (scroll) button page 21, 22To change display items (press); scroll the display item (press and hold).LPTY button page 21To select PTY in RDS.MFrequency select switch (located on the bottom of the unit)See “Frequency select switch” in the supplied installation/connections manual.PUSHSELECT/BTALBUM REP SHUF PAUSEAUXSOURCEDSPLSEEK OFFSEEK SCRL123456PTYMODE BTMIC9 qa qs2qgq; qf1 73 4 5 6 8qdRESETqjqh00US+00COV-U.book Page 15 Wednesday, July 22, 2009 1:27 PM$

$16E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)NNumber buttonsCD:(1)/(2): ALBUM –/+ (during MP3/WMA playback)To skip albums (press); skip albums continuously (press and hold).(3): REP*2 page 22(4): SHUF page 22(6): PAUSETo pause playback. To cancel, press again.Radio:To receive stored stations (press); store stations (press and hold).Bluetooth audio device*1:(6): PAUSETo pause playback. To cancel, press again.Bluetooth phone:(5): MIC page 25OReceptor for the card remote commanderPRESET button (located behind the front panel) page 8QMicrophone page 25NoteDo not cover the microphone, the handsfree function may not work properly.*1 When a Bluetooth audio device (supports AVRCP of Bluetooth technology) is connected. Depending on the device, certain operations may not be available.*2 This button has a tactile dot.00US+00COV-U.book Page 16 Wednesday, July 22, 2009 1:27 PM$

$17E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Card remote commander RM-X304Remove the insulation film before use (page 8).AOFF buttonTo turn off; stop the source.BSOURCE buttonTo turn on; change the source (Radio/CD/AUX/Bluetooth audio/Bluetooth phone).C< (.)/, (>) buttonsTo control Radio/CD/Bluetooth audio, the same as (SEEK) –/+ on the unit.Setup, sound setting, etc., can be operated by < ,.DDSPL (display) buttonTo change display items.EVOL (volume) +*/– buttonTo adjust volume.FATT (attenuate) buttonTo attenuate the sound. To cancel, press again.GMODE buttonTo select the radio band (FM/MW/SW).HSEL (select)/ (handsfree) buttonThe same as the select button on the unit.IM (+)/m (–) buttonsTo control CD, the same as (1)/(2) (ALBUM –/+) on the unit.Setup, sound setting, etc., can be operated by M m.JSCRL (scroll) buttonTo scroll the display item.KNumber buttonsTo receive stored stations (press); store stations (press and hold).*This button has a tactile dot.NoteIf the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE/OFF) on the unit is pressed, or a disc is inserted to activate the unit first.OFFDSPL SCRLSELSOURCEMODE132465ATTVOL+–+–287103654qa900US+00COV-U.book Page 17 Wednesday, July 22, 2009 1:27 PM$

$18E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)RadioStoring and receiving stationsCautionWhen tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.Storing automatically — BTM1Press (SOURCE/OFF) repeatedly until “TUNER” appears.To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2.2Press and hold the select button.The setup display appears.3Press the select button repeatedly until “BTM” appears.4Press (SEEK) +.The unit stores stations in order of frequency on the number buttons.A beep sounds when the setting is stored.1Press (SOURCE/OFF) repeatedly until “TUNER” appears.To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, MW or LW.2Press and hold the select button.The setup display appears.3Press the select button repeatedly until “BTM” appears.4Press (SEEK) +.The unit stores stations in order of frequency on the number buttons.A beep sounds when the setting is stored.1Press (SOURCE/OFF) repeatedly until “TUNER” appears.To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, MW, SW1 or SW2.2Press and hold the select button.The setup display appears.3Press the select button repeatedly until “BTM” appears.4Press (SEEK) +.The unit stores stations in order of frequency on the number buttons.A beep sounds when the setting is stored.Storing manually1While receiving the station that you want to store, press and hold a number button ((1) to (6)) until “MEM” appears.NoteIf you try to store another station on the same number button, the previously stored station will be replaced.TipWhen a RDS station is stored, the AF/TA setting is also stored (page 20).Receiving the stored stations1Select the band, then press a number button ((1) to (6)).Tuning automatically1Select the band, then press (SEEK) +/– to search for the station.Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.TipIf you know the frequency of the station you want to listen to, press and hold (SEEK) +/– to locate the approximate frequency, then press (SEEK) +/– repeatedly to fine adjust to the desired frequency (manual tuning).RDSOverviewFM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal.Display itemsARadio band, FunctionBProgram service name, Clock, Frequency*, Preset number*While receiving the RDS station, “ *” is displayed on the left of the frequency indication.To change display items B, press (DSPL/SCRL).00US+00COV-U.book Page 18 Wednesday, July 22, 2009 1:27 PM$

$19E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)RDS servicesThis unit automatically provides RDS services as follows:Notes•Depending on the country/region, not all RDS functions may be available.•RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data.Selecting PTY1Press (PTY) during FM reception.The current program type name appears if the station is transmitting PTY data.2Press (PTY) repeatedly until the desired program type appears.3Press (SEEK) +/–.The unit starts to search for a station broadcasting the selected program type.Type of programsNotes•You cannot use this function in countries/regions where no PTY data is available.•You may receive a different radio program from the one you select.Setting CT1Set “CT-ON” in setup (page 27).Notes•The CT function may not work even though an RDS station is being received.•There might be a difference between the time set by the CT function and the actual time.RDSOverviewFM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal.Display itemsATA/TP* 1BRadio band, FunctionCFrequency*2 (Program service name), Preset number, Clock, RDS data*1 “TA” flashes during traffic information. “TP” lights up while such a station is received.*2 While receiving the RDS station, “ *” is displayed on the left of the frequency indication.To change display items C, press (DSPL/SCRL).RDS servicesThis unit automatically provides RDS services as follows:PTY (Program Types)Displays the currently received program type. Also searches your selected program type.CT (Clock Time)The CT data from the RDS transmission sets the clock.NEWS (News), INFORM (Information), SPORTS (Sports), TALK (Talk), ROCK (Rock), CLS ROCK (Classic Rock), ADLT HIT (Adult Hits), SOFT RCK (Soft Rock), TOP 40 (Top 40), COUNTRY (Country), OLDIES (Oldies), SOFT (Soft), NOSTALGA (Nostalgia), JAZZ (Jazz), CLASSICL (Classical), R AND B (Rhythm and Blues), SOFT R B (Soft Rhythm and Blues), LANGUAGE (Foreign Language), REL MUSC (Religious Music), REL TALK (Religious Talk), PERSNLTY (Personality), PUBLIC (Public), COLLEGE (College), WEATHER (Weather)AF (Alternative Frequencies)Selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same program during a long-distance drive without having to retune the same station manually.TA (Traffic Announcement)/TP (Traffic Program)Provides current traffic information/programs. Any information/program received, will interrupt the currently selected source.PTY (Program Types)Displays the currently received program type. Also searches your selected program type.00US+00COV-U.book Page 19 Wednesday, July 22, 2009 1:27 PM$

$20E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Notes•Depending on the country/region, not all RDS functions may be available.•RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data.Setting AF and TA1Press (AF/TA) repeatedly until the desired setting appears.Storing RDS stations with the AF and TA settingYou can preset RDS stations along with the AF/TA setting. If you use the BTM function, only RDS stations are stored with the same AF/TA setting.If you preset manually, you can preset both RDS and non-RDS stations with the AF/TA setting for each.1Set AF/TA, then store the station with BTM or manually.Receiving emergency announcementsWith AF or TA on, the emergency announcements will automatically interrupt the currently selected source.TipIf you adjust the volume level during a traffic announcement, that level will be stored into memory for subsequent traffic announcements, independently from the regular volume level.Staying with one regional program — REGWhen the AF function is on: this unit’s factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency.If you leave this regional program’s reception area, set “REG-OFF” in setup during FM reception (page 28).NoteThis function does not work in the UK and in some other areas.Local Link function (UK only)This function enables you to select other local stations in the area, even if they are not stored on your number buttons.1During FM reception, press a number button ((1) to (6)) on which a local station is stored.2Within 5 seconds, press again a number button of the local station.Repeat this procedure until the local station is received.Selecting PTY1Press and hold (AF/TA) (PTY) during FM reception.The current program type name appears if the station is transmitting PTY data.2Press (AF/TA) (PTY) repeatedly until the desired program type appears.3Press (SEEK) +/–.The unit starts to search for a station broadcasting the selected program type.Type of programsNoteYou cannot use this function in countries/regions where no PTY data is available.Setting CT1Set “CT-ON” in setup (page 27).Notes•The CT function may not work even though an RDS station is being received.CT (Clock Time)The CT data from the RDS transmission sets the clock.Select ToAF-ON activate AF and deactivate TA.TA-ON activate TA and deactivate AF.AF, TA-ON activate both AF and TA.AF, TA-OFF deactivate both AF and TA.NEWS (News), AFFAIRS (Current Affairs), INFO (Information), SPORT (Sports), EDUCATE (Education), DRAMA (Drama), CULTURE (Culture), SCIENCE (Science), VARIED (Varied), POP M (Pop Music), ROCK M (Rock Music), EASY M (M.O.R. Music), LIGHT M (Light classical), CLASSICS (Serious classical), OTHER M (Other Music), WEATHER (Weather), FINANCE (Finance), CHILDREN (Children’s program), SOCIAL A (Social Affairs), RELIGION (Religion), PHONE IN (Phone In), TRAVEL (Travel), LEISURE (Leisure), JAZZ (Jazz Music), COUNTRY (Country Music), NATION M (National Music), OLDIES (Oldies Music), FOLK M (Folk Music), DOCUMENT (Documentary)00US+00COV-U.book Page 20 Wednesday, July 22, 2009 1:27 PM$

$21E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)•There might be a difference between the time set by the CT function and the actual time.RDSOverviewFM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal.Display itemsARadio band, FunctionBProgram service name, Clock, Frequency*, Preset number*While receiving the RDS station, “ *” is displayed on the left of the frequency indication.To change display items B, press (DSPL/SCRL).RDS servicesThis unit automatically provides RDS services as follows:Notes•Depending on the country/region, not all RDS functions may be available.•RDS will not work if the signal strength is too weak, or if the station you are tuned to is not transmitting RDS data.Selecting PTY1Press (PTY) during FM reception.The current program type name appears if the station is transmitting PTY data.2Press (PTY) repeatedly until the desired program type appears.3Press (SEEK) +/–.The unit starts to search for a station broadcasting the selected program type.Type of programsNotes•You cannot use this function in countries/regions where no PTY data is available.•You may receive a different radio program from the one you select.Setting CT1Set “CT-ON” in setup (page 28).Notes•The CT function may not work even though an RDS station is being received.•There might be a difference between the time set by the CT function and the actual time.PTY (Program Types)Displays the currently received program type. Also searches your selected program type.CT (Clock Time)The CT data from the RDS transmission sets the clock.NEWS (News), AFFAIRS (Current Affairs), INFO (Information), SPORT (Sports), EDUCATE (Education), DRAMA (Drama), CULTURE (Culture), SCIENCE (Science), VARIED (Varied), POP M (Pop Music), ROCK M (Rock Music), EASY M (M.O.R. Music), LIGHT M (Light classical), CLASSICS (Serious classical), OTHER M (Other Music), WEATHER (Weather), FINANCE (Finance), CHILDREN (Children’s program), SOCIAL A (Social Affairs), RELIGION (Religion), PHONE IN (Phone In), TRAVEL (Travel), LEISURE (Leisure), JAZZ (Jazz Music), COUNTRY (Country Music), NATION M (National Music), OLDIES (Oldies Music), FOLK M (Folk Music), DOCUMENT (Documentary)00US+00COV-U.book Page 21 Wednesday, July 22, 2009 1:27 PM$

$22E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)CDDisplay itemsASourceBTrack name*1, Disc/artist name*1, Artist name*1, Album number*2, Album name*1, Track number/Elapsed playing time, Clock*1 The information of a CD TEXT, MP3/WMA is displayed.*2 Album number is displayed only when the album is changed.To change display items B, press (DSPL/SCRL).TipDisplayed items may differ depending on model, disc type, recording format and settings. For details on MP3/WMA, see page 30.Repeat and shuffle play1During playback, press (3) (REP) or (4) (SHUF) repeatedly until the desired setting appears.*When an MP3/WMA is played.To return to normal play mode, select “ OFF” or “SHUF OFF.”Select To play TRACK track repeatedly. ALBUM* album repeatedly.SHUF ALBUM* album in random order.SHUF DISC disc in random order.00US+00COV-U.book Page 22 Wednesday, July 22, 2009 1:27 PM$

$23E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Bluetooth (Handsfree calling and Music streaming)Bluetooth operationsTo use the Bluetooth function, the following procedure is necessary.1PairingWhen connecting Bluetooth devices for the first time, mutual registration is required. This is called “pairing.” This registration (pairing) is required only for the first time, as this unit and the other devices will recognize each other automatically from the next time. You can pair up to 8 devices. (Depending on the device, you may need to input a passcode for each connection.)2ConnectionTo use the device after pairing is made, start the connection. Sometimes pairing allows to connect automatically.3Handsfree calling/Music streamingYou can talk handsfree and listen to music when the connection is made.PairingFirst, register (“pair”) a Bluetooth device (cellular phone, etc.) and this unit with each other. You can pair up to 8 devices. Once pairing is established, there is no need for pairing again.1Place the Bluetooth device within 1 m (3 ft) of this unit.2Press and hold (BT) until “ ” flashes (about 5 seconds).The unit enters pairing standby mode.3Set the Bluetooth device to search for this unit.A list of detected devices appears in the display of the device to be connected. This unit is displayed as “XPLOD” on the device to be connected.4If Passcode* input is required on the display of the device to be connected, input “0000.”This unit and the Bluetooth device memorize each other’s information, and when pairing is made, the unit is ready for connection to the device.“ ” flashes and then stays lit after pairing is complete.5Set the Bluetooth device to connect to this unit.“ ” or “ ” appears when the connection is made.*Passcode may be called “passkey,” “PIN code,” “PIN number” or “Password,” etc., depending on the device.NotePairing standby mode is not released until the connection is made.Support sitehttp://esupport.sony.comhttp://www.xplodsony.com/Support sitehttp://support.sony-europe.com/Support siteCustomers in Latin America:http://esupport.sony.com/ES/LA/Customers in Pan Asia:http://www.sony-asia.com/section/supporthttp://www.sony-asia.com/caraudio/flashingXXXXXXXDR-BT30QXPLODXXXXInput passcode.“0000”00US+00COV-U.book Page 23 Wednesday, July 22, 2009 1:27 PM$

$24E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)About Bluetooth iconsThe following icons are used by this unit.ConnectionIf pairing has already been achieved, start operation from here.To switch the Bluetooth signal output of this unit to onTo use the Bluetooth function, switch the Bluetooth signal output of this unit to on.1Press and hold (BT) until “ ” lights (about 3 seconds).Bluetooth signal is switched to on.Connecting a cellular phone1Be sure that both this unit and the cellular phone are switched to Bluetooth signal on.2Connect to this unit using the cellular phone.“ ”appears when the connection is made.Connecting the last-connected cellular phone from this unit1Be sure that both this unit and the cellular phone are switched to Bluetooth signal on.2Press (SOURCE/OFF) repeatedly until “BT PHONE” appears.3Press (handsfree).“ ” flashes while the connection is being made. And then “ ” stays lit when the connection is made.NoteWhile streaming Bluetooth audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead. A connecting noise may be heard over playback sound.TipWith Bluetooth signal on: when the ignition is switched to on, this unit reconnects automatically to the last-connected cellular phone. But automatic connection also depends on the cellular phone’s specification. If this unit does not reconnect automatically, connect manually.Connecting an audio device1Be sure that both this unit and the audio device are switched to Bluetooth signal on.2Connect to this unit using the audio device.“ ” appears when the connection is made.Connecting the last-connected audio device from this unit1Be sure that both this unit and the audio device are switched to Bluetooth signal on.2Press (SOURCE/OFF) repeatedly until “BT AUDIO” appears.3Press (6).“ ” flashes while the connection is being made. And then “ ” stays lit when the connection is made.Handsfree callingCheck that the unit and cellular phone are connected beforehand.Receiving callsWhen receiving a call, a ring tone is output from your car speakers.1Press (handsfree) when a call is received with a ring tone. The phone call starts.To end a callPress (handsfree) again.To reject an incoming call, press and hold (handsfree) for 2 seconds.lit:flashing:off:Bluetooth signal onPairing standby modeBluetooth signal offlit:flashing:off:Connection successfulConnectingNo connectionlit:flashing:off:Connection successfulConnectingNo connection00US+00COV-U.book Page 24 Wednesday, July 22, 2009 1:27 PM$

$25E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Mic Gain adjustmentYou can switch between two volume levels (“LOW” or “HI”) to set a suitable level for the other party during a call.1Press (5) during a call.The item changes as follows:MIC-LOW y MIC-HINoteThe microphone of this unit is located on the rear of the front panel (page 10). Do not cover the microphone with tape, etc.NoteThe microphone of this unit is located on the rear of the front panel (page 13). Do not cover the microphone with tape, etc.NoteThe microphone of this unit is located on the rear of the front panel (page 15). Do not cover the microphone with tape, etc.Making callsIn the case of making calls from this unit, redial is used.1Press (SOURCE/OFF) repeatedly until “BT PHONE” appears.2Press and hold (handsfree) for 3 seconds or more.The phone call starts.To end a callPress (handsfree) again.To call another phone, use your cellular phone, and then transfer the call.For call transfer details, check the following.Call transferIn order to activate/deactivate the appropriate device (this unit/cellular phone), check the following.1Press and hold (handsfree) or use your cellular phone.For details on cellular phone operation, refer to your cellular phone manual.NoteDepending on the cellular phone, handsfree connection may be cut off when call transfer is attempted.Voice Dial ActivationYou can activate voice dialing with a cellular phone connected to this unit by saying the voice tag stored on the cellular phone, then make a call.1Press (SOURCE/OFF) repeatedly until “BT PHONE” appears.2Press (handsfree).The cellular phone enters voice dialing mode.3Say the voice tag stored on the cellular phone.Your voice is recognized, and the call is made.Notes•Check that unit and cellular phone are connected beforehand.•Store a voice tag on your cellular phone beforehand.•If you activate voice dialing with a cellular phone connected to this unit, this function may not always work in some cases.•Noises such as the engine running may interfere with sound recognition. In order to improve recognition, operate under conditions where noise is minimized.•Voice dialing may not work in some situations, depending on the effectiveness of the cellular phone’s recognition function. For details, see the support site (page 23).•Voice dialing may not work in some situations, depending on the effectiveness of the cellular phone’s recognition function. For details, see the support site (page 23).•Voice dialing may not work in some situations, depending on the effectiveness of the cellular phone’s recognition function. For details, see the support site (page 23).Tips•Speak in the same way as you did when you stored the voice tag.•Store a voice tag while seated in the car, via this unit with “BT PHONE” source selected.Music streamingListening to music from an audio deviceYou can listen to music of an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth technology.1Turn down the volume on this unit.2Press (SOURCE/OFF) repeatedly until “BT AUDIO” appears.3Operate the audio device to start playback.4Adjust the volume on this unit.Adjusting the volume levelThe volume level is adjustable for any difference between the unit and the Bluetooth audio device.1Start playback of the Bluetooth audio device at a moderate volume.00US+00COV-U.book Page 25 Wednesday, July 22, 2009 1:27 PM$

$26E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)2Set your usual listening volume on the unit.3Press the select button repeatedly until “BTA” appears, and rotate the volume control dial to adjust the input level (–8 dB to +18 dB).Operating an audio device with this unitYou can perform the following operations on this unit if the audio device supports AVRCP (Audio Video Remote Control Profile) of Bluetooth technology. (The operation differs depending on the audio device.)*Depending on the device, it may be necessary to press twice.Operations other than the above should be performed on the audio device.Notes•During audio device playback, information such as track number/time, playback status, etc., of a connected audio device is not displayed on this unit.•Even if the source is changed on this unit, playback of the audio device does not stop.TipYou can connect a cellular phone that supports A2DP (Advanced Audio Distribution Profile) as an audio device and listen to music.Deleting registration of all paired devices1Press and hold (SOURCE/OFF) for 1 second to turn off the power.2If “ ” lights, press and hold (BT) until “ ” turns off.3Press and hold the select button.4Press the select button repeatedly until “BT INIT” appears.5Press (SEEK) +.Initializing starts.It takes 3 seconds to cancel all registration. Do not turn off the power while “INITIAL” is flashing.Other functionsChanging the sound settingsAdjusting the sound characteristics1Press the select button repeatedly until the desired item appears.2Rotate the control dial to adjust the selected item.After 5 seconds, the setting is complete and the display returns to normal reception/play mode.The following items can be set (follow the page reference for details):To PressPlay (6) (PAUSE)* on this unit.Pause (6) (PAUSE)* on this unit.Skip tracks SEEK –/+ (./>) [once for each track] EQ3Selects an equalizer curve from 7 music types (XPLOD, VOCAL, EDGE, CRUISE, SPACE, G RAV I T Y, C U S TO M or O F F ) .LOW*1, MID*1, HI*1 (page 27)BAL (Balance)Adjusts the sound balance between the left and right speakers.FAD (Fader)Adjusts the relative level between the front and rear speakers.SUB*2 (Subwoofer volume)Adjusts the subwoofer volume.AUX*3 (AUX level)Adjusts the volume level for each connected auxiliary equipment: “+18 dB” – “0 dB” – “–8 dB.”This setting negates the need to adjust the volume level between sources.BTA*4 (BT-Audio level)Adjusts the volume level for each connected Bluetooth audio device: “+18 dB” – “0 dB” – “–8 dB.”This setting negates the need to adjust the volume level between sources (page 25).*1 When EQ3 is activated.*2 “ATT” is displayed at the lowest setting, and can be adjusted up to 21 steps.*3 When AUX source is activated (page 29).*4 When Bluetooth audio source is activated (page 25).00US+00COV-U.book Page 26 Wednesday, July 22, 2009 1:27 PM$

$27E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Customizing the equalizer curve — EQ3“CUSTOM” of EQ3 allows you to make your own equalizer settings.1Select a source, then press the select button repeatedly to select “EQ3.”2Rotate the control dial to select “CUSTOM.”3Press the select button repeatedly until “LOW,” “MID” or “HI” appears.4Rotate the control dial to adjust the selected item.The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.Repeat steps 3 and 4 to adjust the equalizer curve.To restore the factory-set equalizer curve, press and hold the select button before the setting is complete.TipOther equalizer types are also adjustable.Adjusting setup items — SET1Press and hold the select button.The setup display appears.2Press the select button repeatedly until the desired item appears.3Rotate the control dial to select the setting (example “ON” or “OFF”).4Press and hold the select button.The setup is complete and the display returns to normal reception/play mode.NoteDisplayed items will differ, depending on the source and setting.The following items can be set (follow the page reference for details):*1 When the unit is turned off.*2 When FM is received.*3 When the audio output is set to “SUB-OUT.”The following items can be set (follow the page reference for details):CLOCK-ADJ (Clock Adjust) (page 8)CT (Clock Time)Activates the CT function: “ON,” “OFF” (page 19, 19).BEEPActivates the beep sound: “ON,” “OFF.”AUX-A*1 (AUX Audio)Activates the AUX source display: “ON,” “OFF” (page 29).A.OFF (Auto Off)Shuts off automatically after a desired time when the unit is turned off: “NO,” “30S (Seconds),” “30M (Minutes),” “60M (Minutes).”SUB/REAR*1Switches the audio output: “SUB-OUT” (subwoofer), “REAR-OUT” (power amplifier).DEMO (Demonstration)Activates the demonstration: “ON,” “OFF.”DIM (Dimmer)Changes the display brightness: “ON,” “OFF.”A.SCRL (Auto Scroll)Scrolls long items automatically: “ON,” “OFF.”LOCAL (Local Seek Mode)– “ON”: to only tune into stations with stronger signals.– “OFF”: to tune normal reception.MONO*2 (Monaural Mode)Selects monaural reception mode to improve poor FM reception: “ON,” “OFF.”LPF*3 (Low Pass Filter)Selects the subwoofer cut-off frequency: “OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”LPF NORM/REV*3 (Low Pass Filter Normal/Reverse)Selects the subwoofer phase: “NORM,” “REV.”HPF (High Pass Filter)Selects the front/rear speaker cut-off frequency: “OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”LOUD (Loudness)Reinforces bass and treble for clear sound at low volume levels: “ON,” “OFF.”BTM (page 18)BT INIT*1 (page 26)CLOCK-ADJ (Clock Adjust) (page 8)CT (Clock Time)Activates the CT function: “ON,” “OFF” (page 20, 20).BEEPActivates the beep sound: “ON,” “OFF.”AUX-A*1 (AUX Audio)Activates the AUX source display: “ON,” “OFF” (page 29).A.OFF (Auto Off)Shuts off automatically after a desired time when the unit is turned off: “NO,” “30S (Seconds),” “30M (Minutes),” “60M (Minutes).”00US+00COV-U.book Page 27 Wednesday, July 22, 2009 1:27 PM19) 20)$

$28E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)*1 When the unit is turned off.*2 When FM is received.*3 When the audio output is set to “SUB-OUT.”The following items can be set (follow the page reference for details): *1 When the unit is turned off.*2 When FM is received.*3 When the audio output is set to “SUB-OUT.”SUB/REAR*1Switches the audio output: “SUB-OUT” (subwoofer), “REAR-OUT” (power amplifier).DEMO (Demonstration)Activates the demonstration: “ON,” “OFF.”DIM (Dimmer)Changes the display brightness: “ON,” “OFF.”A.SCRL (Auto Scroll)Scrolls long items automatically: “ON,” “OFF.”LOCAL (Local Seek Mode)– “ON”: to only tune into stations with stronger signals.– “OFF”: to tune normal reception.MONO*2 (Monaural Mode)Selects monaural reception mode to improve poor FM reception: “ON,” “OFF.”REG*2 (Regional)Restricts reception to a specific region: “ON,” “OFF” (page 20).LPF*3 (Low Pass Filter)Selects the subwoofer cut-off frequency: “OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”LPF NORM/REV*3 (Low Pass Filter Normal/Reverse)Selects the subwoofer phase: “NORM,” “REV.”HPF (High Pass Filter)Selects the front/rear speaker cut-off frequency: “OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”LOUD (Loudness)Reinforces bass and treble for clear sound at low volume levels: “ON,” “OFF.”BTM (page 18)BT INIT*1 (page 26)CLOCK-ADJ (Clock Adjust) (page 8)CT (Clock Time)Activates the CT function: “ON,” “OFF” (page 21, 21).BEEPActivates the beep sound: “ON,” “OFF.”AUX-A*1 (AUX Audio)Activates the AUX source display: “ON,” “OFF” (page 29).A.OFF (Auto Off)Shuts off automatically after a desired time when the unit is turned off: “NO,” “30S (Seconds),” “30M (Minutes),” “60M (Minutes).”SUB/REAR*1Switches the audio output: “SUB-OUT” (subwoofer), “REAR-OUT” (power amplifier).B.OUT (Black Out)Turns off the illumination automatically for any source (e.g., during radio reception/CD playback, etc.) if no operation is performed for 5 seconds: “ON,” “OFF.”To bring the light back on, press any button on the unit. (When activated, remote operation is unavailable.)DEMO (Demonstration)Activates the demonstration: “ON,” “OFF.”DIM (Dimmer)Changes the display brightness: “ON,” “OFF.”A.SCRL (Auto Scroll)Scrolls long items automatically: “ON,” “OFF.”LOCAL (Local Seek Mode)– “ON”: to only tune into stations with stronger signals.– “OFF”: to tune normal reception.MONO*2 (Monaural Mode)Selects monaural reception mode to improve poor FM reception: “ON,” “OFF.”LPF*3 (Low Pass Filter)Selects the subwoofer cut-off frequency: “OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”LPF NORM/REV*3 (Low Pass Filter Normal/Reverse)Selects the subwoofer phase: “NORM,” “REV.”HPF (High Pass Filter)Selects the front/rear speaker cut-off frequency: “OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”LOUD (Loudness)Reinforces bass and treble for clear sound at low volume levels: “ON,” “OFF.”BTM (page 18)BT INIT*1 (page 26)00US+00COV-U.book Page 28 Wednesday, July 22, 2009 1:27 PM 21)$

$29E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Using optional equipmentAuxiliary audio equipmentBy connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:Connecting the portable audio device1Turn off the portable audio device.2Turn down the volume on the unit.3Connect to the unit.*Be sure to use a straight type plug.Adjust the volume levelBe sure to adjust the volume for each connected audio device before playback.1Turn down the volume on the unit.2Press (SOURCE/OFF) repeatedly until “AUX” appears.After that, “AUX FRONT IN” appears.3Start playback of the portable audio device at a moderate volume.4Set your usual listening volume on the unit.5Adjust the input level (page 26).Card remote commander RM-X114 The corresponding buttons on the card remote commander control the same functions as those on this unit.The following buttons on the card remote commander have also different buttons/functions from the unit.•DSPL (display) buttonTo change display items.•SOURCE buttonTo turn on; change the source (Radio/CD/AUX/Bluetooth audio/Bluetooth phone).•</, (SEEK –/+) buttonsTo control Radio/CD/Bluetooth audio, the same as (SEEK) –/+ on the unit.•SOUND buttonThe same as the select button on the unit.Bluetooth phone:Press and hold for 2 seconds or more to redial the last number.Press to enter voice dialing mode/end or receive a call.•OFF buttonTo turn off/stop the source/end a call.•LIST buttonTo select PTY in RDS.•M/m (DISC*/PRESET +/–) buttonsTo control CD, the same as (1)/(2) (ALBUM –/+) buttons on the unit.•ATT (attenuate) buttonTo attenuate the sound. To cancel, press again.*Not available for this unit.NoteIf the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE/OFF) on the unit is pressed, or a disc is inserted to activate the unit first.AUXAUXConnecting cord* (not supplied)DISC –ATTOFFDSPL MODESOURCEDISC +VOL+–PRESET +SEEK+SEEK–PRESET –SOUNDENTERMENULISTMODELISTENTER*ATTDSPLMENU*SOURCE</, (SEEK –/+ )SOUNDOFFVOL (+/ –)m/M (DISC*/PRESET +/ –)00US+00COV-U.book Page 29 Wednesday, July 22, 2009 1:27 PM$

$30E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Additional InformationPrecautions• Cool off the unit beforehand if your car has been parked in direct sunlight.• Power antenna (aerial) extends automatically.Moisture condensationShould moisture condensation occur inside the unit, remove the disc and wait for about an hour for it to dry out; otherwise the unit will not operate properly.To maintain high sound qualityDo not splash liquid onto the unit or discs.Notes on discs• Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight.• Before playing, wipe the discs with a cleaning cloth from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners.• This unit is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some of the music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this unit.•Discs that this unit CANNOT play– Discs with labels, stickers, or sticky tape or paper attached. Doing so may cause a malfunction, or may ruin the disc.– Discs with non-standard shapes (e.g., heart, square, star). Attempting to do so may damage the unit.–8 cm (3 1/4 in) discs.Notes on CD-R/CD-RW discs• The maximum number of: (CD-R/CD-RW only)– folders (albums): 150 (including root folder)– files (tracks) and folders: 300 (may less than 300 if folder/file names contain many characters)– displayable characters for a folder/file name: 32 (Joliet)/64 (Romeo)• If the multi-session disc begins with a CD-DA session, it is recognized as a CD-DA disc, and other sessions are not played back.•Discs that this unit CANNOT play– CD-R/CD-RW of poor recording quality.– CD-R/CD-RW recorded with an incompatible recording device.– CD-R/CD-RW which is finalized incorrectly.– CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet/Romeo or multi-session.Playback order of MP3/WMA filesAbout MP3 files• MP3, which stands for MPEG-1 Audio Layer-3, is a music file compression format standard. It compresses audio CD data to approximately 1/10 of its original size.• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to MP3 only. ID3 tag is 15/30 characters (1.0 and 1.1), or 63/126 characters (2.2, 2.3 and 2.4).• When naming an MP3 file, be sure to add the file extension “.mp3” to the file name.• During playback or fast-forward/reverse of a VBR (Variable Bit Rate) MP3 file, elapsed playing time may not display accurately.NoteIf you play a high-bit-rate MP3, such as 320 kbps, sound may be intermittent.About WMA files• WMA, which stands for Windows Media Audio, is a music file compression format standard. It compresses audio CD data to approximately 1/22* of its original size.• WMA tag is 63 characters.• When naming a WMA file, be sure to add the file extension “.wma” to the file name.• During playback or fast-forward/reverse of a VBR (Variable Bit Rate) WMA file, elapsed playing time may not display accurately.*only for 64 kbpsNotePlayback of the following WMA files is not supported.– lossless compression– copyright-protectedFolder (album)MP3/WMA file (track)MP3/WMA00US+00COV-U.book Page 30 Wednesday, July 22, 2009 1:27 PM$

$31E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)About Bluetooth functionWhat is Bluetooth technology?• Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a cellular phone and a headset. Bluetooth wireless technology operates within a range of about 10 m (about 33 feet). Connecting two devices is common, but some devices can be connected to multiple devices at the same time.• You do not need to use a cable for connection since Bluetooth technology is a wireless technology, neither is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket.• Bluetooth technology is an international standard supported by millions of companies all over the world, and employed by various companies worldwide.On Bluetooth communication• Bluetooth wireless technology operates within a range of about 10 m. Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment.• The following conditions may affect the sensitivity of Bluetooth communication.– There is an obstacle such as a person, metal, or wall between this unit and Bluetooth device.– A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit.• Because Bluetooth devices and wireless LAN (IEEE802.11b/g) use the same frequency, microwave interference may occur and result in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. In such as case, perform the following.– Use this unit at least 10 m away from the wireless LAN device.– If this unit is used within 10 m of a wireless LAN device, turn off the wireless LAN device.– Install this unit and Bluetooth device as near to each other as possible.• Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off this unit and other Bluetooth devices in the following locations, as it may cause an accident.– where inflammable gas is present, in a hospital, train, airplane, or petrol station– near automatic doors or a fire alarm• This unit supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology.• We do not take any responsibility for the leakage of information during Bluetooth communication.• Connection with all Bluetooth devices cannot be guaranteed.– A device featuring Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated.– Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.– While talking on the phone hands free, noise may occur, depending on the device or communication environment.• Depending on the device to be connected, it may require some time to start communication.Others• Using the Bluetooth device may not function on cellular phones, depending on radio wave conditions and location where the equipment is being used.• If you experience discomfort after using the Bluetooth device, stop using the Bluetooth device immediately. Should any problem persist, consult your nearest Sony dealer.If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.MaintenanceReplacing the lithium battery of the card remote commanderUnder normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.)When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion.12+ side upc00US+00COV-U.book Page 31 Wednesday, July 22, 2009 1:27 PM$

$32E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Notes on the lithium battery•Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.•Wipe the battery with a dry cloth to assure a good contact.•Be sure to observe the correct polarity when installing the battery.•Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.Fuse replacementWhen replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.Cleaning the connectorsThe unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 8) and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged.Notes•For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.•Never touch the connectors directly with your fingers or with any metal device.Removing the unit1Remove the protection collar.1Detach the front panel (page 8).2Pinch both edges of the protection collar, then pull it out.2Remove the unit.x+ side up12+ side upcWARNINGBattery may explode if mistreated.Do not recharge, disassemble, or dispose of in fire.Fuse (10 A)Main unit Back of the front panelx00US+00COV-U.book Page 32 Wednesday, July 22, 2009 1:27 PM$

$33E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)1Insert both release keys simultaneously until they click.2Pull the release keys to unseat the unit.3Slide the unit out of the mounting.SpecificationsTuner sectionFMTuning range: 87.5 – 107.9 MHzAntenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: 150 kHzUsable sensitivity: 10 dBfSelectivity: 75 dB at 400 kHzSignal-to-noise ratio: 70 dB (mono)Separation: 40 dB at 1 kHzFrequency response: 20 – 15,000 HzAMTuning range: 530 – 1,710 kHzAntenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: 25 kHzSensitivity: 26 µVCD Player sectionSignal-to-noise ratio: 120 dBFrequency response: 10 – 20,000 HzWow and flutter: Below measurable limitWireless CommunicationCommunication System: Bluetooth Standard version 2.0Output: Bluetooth Standard Power Class 2 (Max. +4 dBm)Maximum communication range: Line of sight approx. 10 m (33 ft)*1Frequency band: 2.4 GHz band (2.4000 – 2.4835 GHz)Modulation method: FHSSCompatible Bluetooth Profiles*2:A2DP (Advanced Audio Distribution Profile)AVRCP (Audio Video Remote Control Profile)HFP (Handsfree Profile) 1.5HSP (Headset Profile)*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating system, software application, etc.*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.Power amplifier sectionOutput: Speaker outputs (sure seal connectors)Speaker impedance: 4 – 8 ohmsMaximum power output: 52 W u 4 (at 4 ohms)GeneralOutputs: Audio outputs terminal (front, sub/rear switchable)Power antenna (aerial) relay control terminalPower amplifier control terminalInputs: BUS control input terminalBUS audio input terminalTelephone ATT control terminalRemote controller input terminalAntenna (aerial) input terminalAUX input jack (stereo mini jack)Tone controls: Low: ±10 dB at 60 Hz (XPLOD)Mid: ±10 dB at 1 kHz (XPLOD)High: ±10 dB at 10 kHz (XPLOD)Power requirements: 12 V DC car battery (negative ground (earth))Dimensions: Approx. 178 u 50 u 179 mm (7 1/8 u 2 u 7 1/8 in) (w/h/d)Mounting dimensions: Approx. 182 u 53 u 162 mm (7 1/4 u 2 1/8 u 6 1/2 in) (w/h/d)Mass: Approx. 1.2 kg (2 lb 11 oz)Supplied accessories: Card remote commander: RM-X304 Parts for installation and connections (1 set)Optional accessories/equipment: BUS cable (supplied with an RCA pin cord): RC-61 (1 m), RC-62 (2 m)Source selector: XA-C40AUX-IN selector: XA-300Interface adaptor for iPod: XA-120IPHD Radio™ tuner: XT-100HDTuner sectionFMTuning range: 87.5 – 108.0 MHzAntenna (aerial) terminal: Hook facing inwards.CEA2006 StandardPower Output: 17 Watts RMS 4 Ohms < 1% THD+N SN Ratio: 82 dBA (reference: 1 Watt into 4 Ohms)AUDIO POWER SPECIFICATIONS4 at 00US+00COV-U.book Page 33 Wednesday, July 22, 2009 1:27 PM$

$34E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)External antenna (aerial) connectorIntermediate frequency: 150 kHzUsable sensitivity: 10 dBfSelectivity: 75 dB at 400 kHzSignal-to-noise ratio: 70 dB (mono)Separation: 40 dB at 1 kHzFrequency response: 20 – 15,000 HzMW/LWTuning range: MW: 531 – 1,602 kHzLW: 153 – 279 kHzAntenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: 25 kHzSensitivity: MW: 26 µV, LW: 45 µVCD Player sectionSignal-to-noise ratio: 120 dBFrequency response: 10 – 20,000 HzWow and flutter: Below measurable limitWireless CommunicationCommunication System: Bluetooth Standard version 2.0Output: Bluetooth Standard Power Class 2 (Max. +4 dBm)Maximum communication range: Line of sight approx. 10 m (33 ft)*1Frequency band: 2.4 GHz band (2.4000 – 2.4835 GHz)Modulation method: FHSSCompatible Bluetooth Profiles*2:A2DP (Advanced Audio Distribution Profile)AVRCP (Audio Video Remote Control Profile)HFP (Handsfree Profile) 1.5HSP (Headset Profile)*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating system, software application, etc.*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.Power amplifier sectionOutput: Speaker outputs (sure seal connectors)Speaker impedance: 4 – 8 ohmsMaximum power output: 52 W u 4 (at 4 ohms)GeneralOutputs: Audio outputs terminal (sub/rear switchable)Power antenna (aerial) relay control terminalPower amplifier control terminalInputs: Telephone ATT control terminalRemote controller input terminalAntenna (aerial) input terminalAUX input jack (stereo mini jack)Tone controls: Low: ±10 dB at 60 Hz (XPLOD)Mid: ±10 dB at 1 kHz (XPLOD)High: ±10 dB at 10 kHz (XPLOD)Power requirements: 12 V DC car battery (negative ground (earth))Dimensions: Approx. 178 u 50 u 179 mm (7 1/8 u 2 u 7 1/8 in) (w/h/d)Mounting dimensions: Approx. 182 u 53 u 162 mm (7 1/4 u 2 1/8 u 6 1/2 in) (w/h/d)Mass: Approx. 1.2 kg (2 lb 11 oz)Supplied accessory: Parts for installation and connections (1 set)Optional accessory/equipment: Card remote commander: RM-X114Tuner sectionFMTuning range:87.5 – 108.0 MHz (at 50 kHz step)87.5 – 107.9 MHz (at 200 kHz step)FM tuning interval: 50 kHz/200 kHz switchableAntenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: 150 kHzUsable sensitivity: 10 dBfSelectivity: 75 dB at 400 kHzSignal-to-noise ratio: 70 dB (mono)Separation: 40 dB at 1 kHzFrequency response: 20 – 15,000 HzMWTuning range: 531 – 1,602 kHz (at 9 kHz step)530 – 1,710 kHz (at 10 kHz step)MW tuning interval: 9 kHz/10 kHz switchableAntenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: 25 kHzSensitivity: 26 µVSWTuning range: SW1: 2,940 – 7,735 kHzSW2: 9,500 – 18,135 kHz(except for 10,140 – 11,575 kHz)Antenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: 25 kHzSensitivity: 30 µVCD Player sectionSignal-to-noise ratio: 120 dBFrequency response: 10 – 20,000 HzWow and flutter: Below measurable limitWireless CommunicationCommunication System: Bluetooth Standard version 2.0Output: Bluetooth Standard Power Class 2 (Max. +4 dBm)Maximum communication range: Line of sight approx. 10 m (33 ft)*1Frequency band: 2.4 GHz band (2.4000 – 2.4835 GHz)Modulation method: FHSSCompatible Bluetooth Profiles*2:A2DP (Advanced Audio Distribution Profile)AVRCP (Audio Video Remote Control Profile)HFP (Handsfree Profile) 1.5HSP (Headset Profile)00US+00COV-U.book Page 34 Wednesday, July 22, 2009 1:27 PM$

$35E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating system, software application, etc.*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.Power amplifier sectionOutput: Speaker outputs (sure seal connectors)Speaker impedance: 4 – 8 ohmsMaximum power output: 52 W u 4 (at 4 ohms)GeneralOutputs: Audio outputs terminal (front, sub/rear switchable)Power antenna (aerial) relay control terminalPower amplifier control terminalInputs: Telephone ATT control terminalRemote controller input terminalAntenna (aerial) input terminalAUX input jack (stereo mini jack)Tone controls: Low: ±10 dB at 60 Hz (XPLOD)Mid: ±10 dB at 1 kHz (XPLOD)High: ±10 dB at 10 kHz (XPLOD)Power requirements: 12 V DC car battery (negative ground (earth))Dimensions: Approx. 178 u 50 u 179 mm (7 1/8 u 2 u 7 1/8 in) (w/h/d)Mounting dimensions: Approx. 182 u 53 u 162 mm (7 1/4 u 2 1/8 u 6 1/2 in) (w/h/d)Mass: Approx. 1.2 kg (2 lb 11 oz)Supplied accessories: Card remote commander: RM-X304Parts for installation and connections (1 set)Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information.Your dealer may not handle some of the above listed accessories. Please ask the dealer for detailed information.Design and specifications are subject to change without notice.TroubleshootingThe following checklist will help you remedy problems you may encounter with your unit.Before going through the checklist below, check the connection and operating procedures.If the problem is not solved, visit the following support site.• Halogenated flame retardants are not used in the certain printed wiring boards.• Halogenated flame retardants are not used in cabinets.• Packaging cushions are made from paper.GeneralNo power is being supplied to the unit.• Check the connection or fuse.• If the unit is turned off and the display disappears, it cannot be operated with the remote commander.tTurn on the unit.The power antenna (aerial) does not extend.The power antenna (aerial) does not have a relay box.No sound.• The ATT function is activated, or the Telephone ATT function (when the interface cable of a car telephone is connected to the ATT lead) is activated.• The position of the fader control “FAD” is not set for a 2-speaker system.• The Bluetooth audio device is in pause.tCancel pause.No beep sound.• The beep sound is canceled (page 27).• An optional power amplifier is connected and you are not using the built-in amplifier.The contents of the memory have been erased.• The RESET button has been pressed.tStore again into the memory.• The power supply lead or battery has been disconnected or it is not connected properly.Support sitehttp://esupport.sony.comhttp://www.xplodsony.com/Support sitehttp://support.sony-europe.com/Support siteCustomers in Latin America:http://esupport.sony.com/ES/LA/Customers in Pan Asia:http://www.sony-asia.com/section/supporthttp://www.sony-asia.com/caraudio/00US+00COV-U.book Page 35 Wednesday, July 22, 2009 1:27 PM$

$36E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Stored stations and correct time are erased.The fuse has blown.Makes noise when the position of the ignition is switched.The leads are not matched correctly with the car’s accessory power connector.During playback or reception, demonstration mode starts.If no operation is performed for 5 minutes with “DEMO-ON” set, demonstration mode starts.tSet “DEMO-OFF” (page 27).The display disappears from/does not appear in the display window.• The dimmer is set to “DIM-ON” (page 27).• The display disappears if you press and hold (SOURCE/OFF).tPress (SOURCE/OFF) on the unit until the display appears.• The connectors are dirty (page 32).The Auto Off function does not operate.The unit is turned on. The Auto Off function activates after turning off the unit.tTurn off the unit.Radio receptionThe stations cannot be received.The sound is hampered by noises.• The connection is not correct.tConnect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s antenna (aerial) booster (only when your car has built-in FM/AM antenna (aerial) in the rear/side glass).tCheck the connection of the car antenna (aerial).tIf the auto antenna (aerial) will not go up, check the connection of the power antenna (aerial) control lead.Preset tuning is not possible.• Store the correct frequency in the memory.• The broadcast signal is too weak.Automatic tuning is not possible.• Setting of the local seek mode is not correct.tTuning stops too frequently:Set “LOCAL-ON” (page 27).tTuning does not stop at a station:Set “LOCAL-OFF” (page 27).• The broadcast signal is too weak.tPerform manual tuning.During FM reception, the “ST” indication flashes.• Tune in the frequency accurately.• The broadcast signal is too weak.tSet “MONO-ON” (page 27).An FM program broadcast in stereo is heard in monaural.The unit is in monaural reception mode.tSet “MONO-OFF” (page 27).RDSPTY displays “- - - - - - - -.”• The current station is not an RDS station.• RDS data has not been received.• The station does not specify the program type.CD playbackThe disc cannot be loaded.• Another disc is already loaded.• The disc has been forcibly inserted upside down or in the wrong way.The disc does not play back.• Defective or dirty disc.• The CD-Rs/CD-RWs are not for audio use (page 30).MP3/WMA files cannot be played back.The disc is incompatible with the MP3/WMA format and version. For details on playable discs and formats, visit the support site.MP3/WMA files take longer to play back than others.The following discs take a longer time to start playback.– a disc recorded with a complicated tree structure.– a disc recorded in Multi Session.– a disc to which data can be added.The display items do not scroll.• For discs with very many characters, those may not scroll.• “A.SCRL” is set to “OFF.”tSet “A.SCRL-ON” (page 27).tPress and hold (DSPL/SCRL).The sound skips.• Installation is not correct. tInstall the unit at an angle of less than 45° in a sturdy part of the car.• Defective or dirty disc.The operation buttons do not function.The disc will not eject.Press the RESET button (page 7).Bluetooth functionThe connecting device cannot detect this unit.• Before the pairing is made, set this unit to pairing standby mode.• While connected to a Bluetooth device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from another device.• When the device pairing is made, set the Bluetooth signal output to on (page 24).Connection is not possible.• Connect to this unit from a Bluetooth device or vice versa. The connection is controlled from one side (this unit or Bluetooth device), but not both.• Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again.The talker’s voice volume is low.Adjust the volume level.00US+00COV-U.book Page 36 Wednesday, July 22, 2009 1:27 PM$

$37E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)A call partner says that the volume is too low or high.Adjust the volume accordingly using Mic Gain adjustment (page 25).Echo or noise occurs in phone call conversations.• Lower the volume.• If the ambient noise other than the phone call sound is loud, try reducing this noise.E.g.: If a window is open and road noise, etc., is loud, shut the window. If the air conditioner is loud, lower the air conditioner.The phone is not connected.When the Bluetooth audio is played back, the phone is not connected even if you press (handsfree).tConnect from the phone.The phone sound quality is poor.Phone sound quality depends on reception conditions of cellular phone. tMove your car to a place where you can enhance the cellular phone’s signal if the reception is poor.The volume of the connected audio device is low (high).Volume level will differ depending on the audio device.tAdjust the volume of the connected audio device or this unit.The sound skips during playback of a Bluetooth audio device.• Reduce the distance between the unit and the Bluetooth audio device.• If the Bluetooth audio device is stored in a case which interrupts the signal, remove the audio device from the case while using.• Several Bluetooth devices or other devices which emit radio waves are used nearby.tTurn off the other devices.tReduce the distance from the other devices.• The playback sound stops momentarily when the connection between this unit and the cellular phone is being made. This is not a malfunction.The connected Bluetooth audio device cannot be controlled.Check that the connected Bluetooth audio device supports AVRCP.Some functions do not work.Check if the connecting device supports the functions in question.A call is answered unintentionally.The connecting phone is set to answer a call automatically.No sound is output from the car speakers during handsfree call.If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers.“OFF BT” appears when initializing.Press and hold (BT) until “ ” turns off. Then initialize again (page 26).GeneralNo power is being supplied to the unit.• Check the connection or fuse.• If the unit is turned off and the display disappears, it cannot be operated with the remote commander. tTurn on the unit.The power antenna (aerial) does not extend.The power antenna (aerial) does not have a relay box.No sound.• The ATT function is activated, or the Telephone ATT function (when the interface cable of a car telephone is connected to the ATT lead) is activated.• The position of the fader control “FAD” is not set for a 2-speaker system.• The Bluetooth audio device is in pause.tCancel pause.No beep sound.• The beep sound is canceled (page 27).• An optional power amplifier is connected and you are not using the built-in amplifier.The contents of the memory have been erased.• The RESET button has been pressed.tStore again into the memory.• The power supply lead or battery has been disconnected or it is not connected properly.Stored stations and correct time are erased.The fuse has blown.Makes noise when the position of the ignition is switched.The leads are not matched correctly with the car’s accessory power connector.During playback or reception, demonstration mode starts.If no operation is performed for 5 minutes with “DEMO-ON” set, demonstration mode starts.tSet “DEMO-OFF” (page 28).The display disappears from/does not appear in the display window.• The dimmer is set to “DIM-ON” (page 28).• The display disappears if you press and hold (SOURCE/OFF).tPress (SOURCE/OFF) on the unit until the display appears.• The connectors are dirty (page 32).The Auto Off function does not operate.The unit is turned on. The Auto Off function activates after turning off the unit.tTurn off the unit.00US+00COV-U.book Page 37 Wednesday, July 22, 2009 1:27 PM$

$38E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Radio receptionThe stations cannot be received.The sound is hampered by noises.• The connection is not correct.tConnect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s antenna (aerial) booster (only when your car has built-in FM/MW/LW antenna (aerial) in the rear/side glass).tCheck the connection of the car antenna (aerial).tIf the auto antenna (aerial) will not go up, check the connection of the power antenna (aerial) control lead.Preset tuning is not possible.• Store the correct frequency in the memory.• The broadcast signal is too weak.Automatic tuning is not possible.• Setting of the local seek mode is not correct.tTuning stops too frequently:Set “LOCAL-ON” (page 28).tTuning does not stop at a station:Set “LOCAL-OFF” (page 28).• The broadcast signal is too weak.tPerform manual tuning.During FM reception, the “ST” indication flashes.• Tune in the frequency accurately.• The broadcast signal is too weak.tSet “MONO-ON” (page 28).An FM program broadcast in stereo is heard in monaural.The unit is in monaural reception mode.tSet “MONO-OFF” (page 28).RDSThe SEEK starts after a few seconds of listening.The station is non-TP or has weak signal.tDeactivate TA (page 20).No traffic announcements.• Activate TA (page 20).• The station does not broadcast any traffic announcements despite being TP.tTune in another station.PTY displays “- - - - - - - -.”• The current station is not an RDS station.• RDS data has not been received.• The station does not specify the program type.CD playbackThe disc cannot be loaded.• Another disc is already loaded.• The disc has been forcibly inserted upside down or in the wrong way.The disc does not play back.• Defective or dirty disc.• The CD-Rs/CD-RWs are not for audio use (page 30).MP3/WMA files cannot be played back.The disc is incompatible with the MP3/WMA format and version. For details on playable discs and formats, visit the support site.MP3/WMA files take longer to play back than others.The following discs take a longer time to start playback.– a disc recorded with a complicated tree structure.– a disc recorded in Multi Session.– a disc to which data can be added.The display items do not scroll.• For discs with very many characters, those may not scroll.• “A.SCRL” is set to “OFF.”tSet “A.SCRL-ON” (page 28).tPress and hold (DSPL/SCRL).The sound skips.• Installation is not correct. tInstall the unit at an angle of less than 45° in a sturdy part of the car.• Defective or dirty disc.The operation buttons do not function.The disc will not eject.Press the RESET button (page 7).Bluetooth functionThe connecting device cannot detect this unit.• Before the pairing is made, set this unit to pairing standby mode.• While connected to a Bluetooth device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from another device.• When the device pairing is made, set the Bluetooth signal output to on (page 24).Connection is not possible.• Connect to this unit from a Bluetooth device or vice versa. The connection is controlled from one side (this unit or Bluetooth device), but not both.• Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again.The talker’s voice volume is low.Adjust the volume level.A call partner says that the volume is too low or high.Adjust the volume accordingly using Mic Gain adjustment (page 25).Echo or noise occurs in phone call conversations.• Lower the volume.• If the ambient noise other than the phone call sound is loud, try reducing this noise.E.g.: If a window is open and road noise, etc., is loud, shut the window. If the air conditioner is loud, lower the air conditioner.00US+00COV-U.book Page 38 Wednesday, July 22, 2009 1:27 PM$

$39E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)The phone is not connected.When the Bluetooth audio is played back, the phone is not connected even if you press (handsfree).tConnect from the phone.The phone sound quality is poor.Phone sound quality depends on reception conditions of cellular phone. tMove your car to a place where you can enhance the cellular phone’s signal if the reception is poor.The volume of the connected audio device is low (high).Volume level will differ depending on the audio device.tAdjust the volume of the connected audio device or this unit.The sound skips during playback of a Bluetooth audio device.• Reduce the distance between the unit and the Bluetooth audio device.• If the Bluetooth audio device is stored in a case which interrupts the signal, remove the audio device from the case while using.• Several Bluetooth devices or other devices which emit radio waves are used nearby.tTurn off the other devices.tReduce the distance from the other devices.• The playback sound stops momentarily when the connection between this unit and the cellular phone is being made. This is not a malfunction.The connected Bluetooth audio device cannot be controlled.Check that the connected Bluetooth audio device supports AVRCP.Some functions do not work.Check if the connecting device supports the functions in question.A call is answered unintentionally.The connecting phone is set to answer a call automatically.No sound is output from the car speakers during handsfree call.If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers.“OFF BT” appears when initializing.Press and hold (BT) until “ ” turns off. Then initialize again (page 26).GeneralNo power is being supplied to the unit.• Check the connection or fuse.• If the unit is turned off and the display disappears, it cannot be operated with the remote commander.tTurn on the unit.The power antenna (aerial) does not extend.The power antenna (aerial) does not have a relay box.No sound.• The ATT function is activated, or the Telephone ATT function (when the interface cable of a car telephone is connected to the ATT lead) is activated.• The position of the fader control “FAD” is not set for a 2-speaker system.• The Bluetooth audio device is in pause.tCancel pause.No beep sound.• The beep sound is canceled (page 28).• An optional power amplifier is connected and you are not using the built-in amplifier.The contents of the memory have been erased.• The RESET button has been pressed.tStore again into the memory.• The power supply lead or battery has been disconnected or it is not connected properly.Stored stations and correct time are erased.The fuse has blown.Makes noise when the position of the ignition is switched.The leads are not matched correctly with the car’s accessory power connector.During playback or reception, demonstration mode starts.If no operation is performed for 5 minutes with “DEMO-ON” set, demonstration mode starts.tSet “DEMO-OFF” (page 28).The display disappears from/does not appear in the display window.• The dimmer is set to “DIM-ON” (page 28).• The display disappears if you press and hold (SOURCE/OFF).tPress (SOURCE/OFF) on the unit until the display appears.• The connectors are dirty (page 32).The Auto Off function does not operate.The unit is turned on. The Auto Off function activates after turning off the unit.tTurn off the unit.The display disappears while the unit is operating.The Black Out function is set to on (page 28).Card remote commander operation is not possible.If the Black Out function is activated (no lighting), card remote commander operation is not possible (page 28).00US+00COV-U.book Page 39 Wednesday, July 22, 2009 1:27 PM$

$40E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Radio receptionThe stations cannot be received.The sound is hampered by noises.• The connection is not correct.tConnect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s antenna (aerial) booster (only when your car has built-in FM/MW/SW antenna (aerial) in the rear/side glass).tCheck the connection of the car antenna (aerial).tIf the auto antenna (aerial) will not go up, check the connection of the power antenna (aerial) control lead.Preset tuning is not possible.• Store the correct frequency in the memory.• The broadcast signal is too weak.Automatic tuning is not possible.• Setting of the local seek mode is not correct.tTuning stops too frequently:Set “LOCAL-ON” (page 28).tTuning does not stop at a station:Set “LOCAL-OFF” (page 28).• The broadcast signal is too weak.tPerform manual tuning.During FM reception, the “ST” indication flashes.• Tune in the frequency accurately.• The broadcast signal is too weak.tSet “MONO-ON” (page 28).An FM program broadcast in stereo is heard in monaural.The unit is in monaural reception mode.tSet “MONO-OFF” (page 28).RDSPTY displays “- - - - - - - -.”• The current station is not an RDS station.• RDS data has not been received.• The station does not specify the program type.CD playbackThe disc cannot be loaded.• Another disc is already loaded.• The disc has been forcibly inserted upside down or in the wrong way.The disc does not play back.• Defective or dirty disc.• The CD-Rs/CD-RWs are not for audio use (page 30).MP3/WMA files cannot be played back.The disc is incompatible with the MP3/WMA format and version. For details on playable discs and formats, visit the support site.MP3/WMA files take longer to play back than others.The following discs take a longer time to start playback.– a disc recorded with a complicated tree structure.– a disc recorded in Multi Session.– a disc to which data can be added.The display items do not scroll.• For discs with very many characters, those may not scroll.• “A.SCRL” is set to “OFF.”tSet “A.SCRL-ON” (page 28).tPress and hold (DSPL/SCRL).The sound skips.• Installation is not correct. tInstall the unit at an angle of less than 45° in a sturdy part of the car.• Defective or dirty disc.The operation buttons do not function.The disc will not eject.Press the RESET button (page 8).Bluetooth functionThe connecting device cannot detect this unit.• Before the pairing is made, set this unit to pairing standby mode.• While connected to a Bluetooth device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from another device.• When the device pairing is made, set the Bluetooth signal output to on (page 24).Connection is not possible.• Connect to this unit from a Bluetooth device or vice versa. The connection is controlled from one side (this unit or Bluetooth device), but not both.• Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again.The talker’s voice volume is low.Adjust the volume level.A call partner says that the volume is too low or high.Adjust the volume accordingly using Mic Gain adjustment (page 25).Echo or noise occurs in phone call conversations.• Lower the volume.• If the ambient noise other than the phone call sound is loud, try reducing this noise.E.g.: If a window is open and road noise, etc., is loud, shut the window. If the air conditioner is loud, lower the air conditioner.The phone is not connected.When the Bluetooth audio is played back, the phone is not connected even if you press (handsfree).tConnect from the phone.The phone sound quality is poor.Phone sound quality depends on reception conditions of cellular phone. tMove your car to a place where you can enhance the cellular phone’s signal if the reception is poor.00US+00COV-U.book Page 40 Wednesday, July 22, 2009 1:27 PM$

$41E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)Error displays/MessagesThe volume of the connected audio device is low (high).Volume level will differ depending on the audio device.tAdjust the volume of the connected audio device or this unit.The sound skips during playback of a Bluetooth audio device.• Reduce the distance between the unit and the Bluetooth audio device.• If the Bluetooth audio device is stored in a case which interrupts the signal, remove the audio device from the case while using.• Several Bluetooth devices or other devices which emit radio waves are used nearby.tTurn off the other devices.tReduce the distance from the other devices.• The playback sound stops momentarily when the connection between this unit and the cellular phone is being made. This is not a malfunction.The connected Bluetooth audio device cannot be controlled.Check that the connected Bluetooth audio device supports AVRCP.Some functions do not work.Check if the connecting device supports the functions in question.A call is answered unintentionally.The connecting phone is set to answer a call automatically.No sound is output from the car speakers during handsfree call.If the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers.“OFF BT” appears when initializing.Press and hold (BT) until “ ” turns off. Then initialize again (page 26).ERROR• The disc is dirty or inserted upside down.tClean or insert the disc correctly.• A blank disc has been inserted.• The disc cannot play due to a problem.tInsert another disc.•Press Z to remove the disc.FAILURE (Illuminates until any button is pressed.)The connection of speakers/amplifiers is incorrect.tSee the installation/connections manual of this model to check the connection.FAILURE (Illuminates for about 1 second.)When the SAT tuner is connected, storing an SAT radio channel into a preset failed.tBe sure to receive the channel that you want to store, then try it again.L. SEEK +/–The local seek mode is on during automatic tuning.NO MUSICThe disc does not contain a music file.tInsert a music CD in this unit.NO NAMEA disc/album/artist/track name is not written in the track.OFFSETThere may be an internal malfunction.tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer.READThe unit is reading all track and album information on the disc.tWait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute.RESETThis unit cannot be operated due to a problem.tPress the RESET button (page 7).“” or “”During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further.“”The character cannot be displayed with the unit.ERROR• The disc is dirty or inserted upside down.tClean or insert the disc correctly.• A blank disc has been inserted.• The disc cannot play due to a problem.tInsert another disc.• Press Z to remove the disc.FAILUREThe connection of speakers/amplifiers is incorrect.tSee the installation/connections manual of this model to check the connection.L. SEEK +/–The local seek mode is on during automatic tuning.NO AFThere is no alternative frequency for the current station.tPress (SEEK) +/– while the program service name is flashing. The unit starts searching for another frequency with the same PI (Program Identification) data (“PI SEEK” appears).NO MUSICThe disc does not contain a music file.tInsert a music CD in this unit.NO NAMEA disc/album/artist/track name is not written in the track.NO TPThe unit will continue searching for available TP stations.00US+00COV-U.book Page 41 Wednesday, July 22, 2009 1:27 PM$

$42E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:LeftMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)If these solutions do not help improve the situation, consult your nearest Sony dealer.If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began.OFFSETThere may be an internal malfunction.tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer.READThe unit is reading all track and album information on the disc.tWait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute.RESETThis unit cannot be operated due to a problem.tPress the RESET button (page 7).“” or “”During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further.“”The character cannot be displayed with the unit.ERROR• The disc is dirty or inserted upside down.tClean or insert the disc correctly.• A blank disc has been inserted.• The disc cannot play due to a problem.tInsert another disc.• Press Z to remove the disc.FAILUREThe connection of speakers/amplifiers is incorrect.tSee the installation/connections manual of this model to check the connection.L. SEEK +/–The local seek mode is on during automatic tuning.NO MUSICThe disc does not contain a music file.tInsert a music CD in this unit.NO NAMEA disc/album/artist/track name is not written in the track.OFFSETThere may be an internal malfunction.tCheck the connection. If the error indication remains on in the display, consult your nearest Sony dealer.READThe unit is reading all track and album information on the disc.tWait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute.RESETThis unit cannot be operated due to a problem.tPress the RESET button (page 8)“” or “”During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further.“”The character cannot be displayed with the unit.00US+00COV-U.book Page 42 Wednesday, July 22, 2009 1:27 PM$

$43E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm masterpage:RightMEX-BT2850MEX-BT2800MEX-BT28004-157-841-41(1)4-157-841-21(1)4-157-841-11(1)00US+00COV-U.book Page 43 Wednesday, July 22, 2009 1:27 PM$

Sony Group MEXBT2800 Bluetooth Audio System User Manual 06 UserManual

Sony Corporation Bluetooth Audio System 06 UserManual

User Manual

Navigation menu

Namespaces

Views

Navigation