Sony Group PCG4J3L laptop with wireless radios User Manual 3750 US UG

Sony Corporation laptop with wireless radios 3750 US UG

UserManual.wiki >

Sony Group >

PCG4J3L User Manual >

Users Guide Full

NUser GuidePersonal ComputerVGN-TX Series

2nNContentsBefore Use .........................................................................................................................................................................6Documentation.............................................................................................................................................................6Ergonomic Considerations...........................................................................................................................................7Getting Started .................................................................................................................................................................10Locating Controls and Ports.......................................................................................................................................10About the Indicator Lights ..........................................................................................................................................16Connecting a Power Source ......................................................................................................................................17Using the Battery Pack ..............................................................................................................................................18Shutting Down Your Computer Safely .......................................................................................................................21Using Your VAIO Computer .............................................................................................................................................23Using the Keyboard ...................................................................................................................................................23Using the Touch Pad .................................................................................................................................................24Using Special-function Buttons ..................................................................................................................................25Using the Optical Disc Drive ......................................................................................................................................27Using PC Cards .........................................................................................................................................................34Using the Memory Stick Media ..................................................................................................................................37Using Other Memory Cards .......................................................................................................................................41Using the Internet.......................................................................................................................................................43Using Wireless LAN (WLAN) .....................................................................................................................................44Using the Bluetooth Functionality ..............................................................................................................................51Using Peripheral Devices.................................................................................................................................................57

3nNConnecting a Port Replicator .....................................................................................................................................57Connecting External Speakers ..................................................................................................................................61Connecting an External Display.................................................................................................................................62Selecting Display Modes............................................................................................................................................65Using the Multiple Monitors Function.........................................................................................................................66Connecting an External Microphone..........................................................................................................................67Connecting a Universal Serial Bus (USB) Device......................................................................................................68Connecting a Printer ..................................................................................................................................................70Connecting an i.LINK Device .....................................................................................................................................71Connecting to a Network (LAN) .................................................................................................................................73Customizing Your VAIO Computer ..................................................................................................................................75Setting the Password .................................................................................................................................................75Using Fingerprint Authentication................................................................................................................................83Using Trusted Platform Module (TPM).......................................................................................................................97Setting Up Your Computer with VAIO Central .........................................................................................................101Using the Power Saving Modes...............................................................................................................................102Managing Power with VAIO Power Management....................................................................................................105Changing the Performance Setting..........................................................................................................................108Protecting the Hard Disk ..........................................................................................................................................108Upgrading Your VAIO Computer....................................................................................................................................110Adding and Removing Memory................................................................................................................................110Precautions ....................................................................................................................................................................115On Handling the LCD Screen ..................................................................................................................................115On Using the Power Source ....................................................................................................................................116

4nNOn Handling Your Computer....................................................................................................................................116On Handling Floppy Disks .......................................................................................................................................118On Handling Discs ...................................................................................................................................................119On Using the Battery Pack.......................................................................................................................................119On Using Headphones.............................................................................................................................................120On Handling Memory Stick Media............................................................................................................................121On Handling the Hard Disk ......................................................................................................................................121Troubleshooting .............................................................................................................................................................123Computer .................................................................................................................................................................124System Security .......................................................................................................................................................130Battery......................................................................................................................................................................132Internet.....................................................................................................................................................................133Networking ...............................................................................................................................................................135Bluetooth Technology ..............................................................................................................................................137Optical Discs ............................................................................................................................................................141Display .....................................................................................................................................................................144Printing.....................................................................................................................................................................146Microphone ..............................................................................................................................................................147Mouse ......................................................................................................................................................................147Speakers..................................................................................................................................................................148Touch Pad................................................................................................................................................................149Keyboard..................................................................................................................................................................150Floppy Disks ............................................................................................................................................................151PC Cards .................................................................................................................................................................151

5nNAudio/Video..............................................................................................................................................................152Memory Stick Media ................................................................................................................................................153Peripherals...............................................................................................................................................................154Support Options .............................................................................................................................................................155Sony Support Information ........................................................................................................................................155Program Support Information...................................................................................................................................157

6nNBefore UseBefore UseCongratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal computing.DocumentationYour documentation includes printed information and user guides to read on your VAIO computer.Printed Documentation❑Welcome mat — Contains an overview of connections, setting up information, etc.❑Safety Information — Contains safety guidelines and owner information.❑Instant Mode — Provides a guide to use Instant Mode. Non-printed Documentation❑User Guide (this manual) — Contains features of your computer. It also includes information about the software programs included with your computer, as well as information on solving common problems.❑Specifications — The online Specifications describe the hardware and software configuration of your VAIO computer. To view the online Specifications:1Connect to the Internet.2Go to the Sony online support Web site at http://esupport.sony.com/EN/VAIO/ for customers in USA, at http://www.sony.ca/support for customers in Canada, at http://esupport.sony.com/ES/VAIO/ for customers in Latin American countries or areas, or at http://esupport.sony.com/ES/VAIO/BR/ for customers in Brazil.

7nNBefore Use❑VAIO Recovery Guide — Provides information about restoring individual software programs, software drivers, and drive partition(s) or your entire hard disk drive to the original factory installed settings.To access this on-screen guide:1Click Start, point to All Programs, and click VAIO Support Central. 2Click VAIO Documentation.3Click VAIO Recovery Guide.❑SmartWi™ Connection Utility Guide (Selected models only) — Provides information about setting up Bluetooth, Wireless LAN, and Wireless WAN functionalities.To access this on-screen guide:1Click Start, point to All Programs, and click VAIO Support Central.2Click VAIO Documentation.3Click SmartWi Connection Utility Guide. Ergonomic ConsiderationsYou will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations to both stationary and portable environments:

8nNBefore Use❑Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touch pad, or external mouse. Let your upper arms hang naturally at your sides. Have breaks during sessions with your computer. Excessive use of the computer may strain muscles or tendons.❑Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning far backwards.❑Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the display as well.

9nNBefore Use❑Lighting – Choose a location where windows and lights do not create glare and reflection on the display. Use indirect lighting to avoid bright spots on the display. You can also purchase accessories for your display that help reduce glare. Proper lighting adds to your comfort and work effectiveness. ❑Positioning an external display – When using an external display, set the display at a comfortable viewing distance. Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor.

10nNGetting StartedGetting StartedThis section describes how to get started with using your VAIO computer.!Before starting your computer for the first time, do not connect any new hardware that did not originally come with your computer. Make sure to start up your computer with only the supplied accessories connected and set up your system. Upon completion, connect one device (for example, a printer, an external hard disk drive, a scanner, and so on) at a time, following the manufacturer's instructions.❑Locating Controls and Ports (page 10)❑About the Indicator Lights (page 16)❑Connecting a Power Source (page 17)❑Using the Battery Pack (page 18)❑Shutting Down Your Computer Safely (page 21)Locating Controls and PortsTake a moment to identify the controls and ports shown on the following pages.

11nNGetting StartedFrontAMedia Access indicator (page 16)BMemory Stick PRO/Duo media slot* (page 39)CSD memory card/MultiMediaCard (MMC) slot (page 41)DLCD screen (page 115)EKeyboard (page 23)FTouch pad (page 24)GFingerprint sensor (page 83)HWIRELESS switch (page 44)IMuting button (page 25)JVolume buttons (page 25)KHeadphones jack (page 61)LMicrophone jack (page 67)* Your computer supports Memory Stick PRO media and Memory Stick Duo media with high speed and high capacity capabilities.

12nNGetting StartedAAV MODE button (page 25)BPlay/Pause button (page 25)CStop button (page 25)DPrevious track button (page 25)ENext track button (page 25)FDisc drive eject button (page 25)GBattery indicator (page 16)HHard disk drive indicator (page 16)INum lock indicator (page 16)JCaps lock indicator (page 16)KScroll lock indicator (page 16)LPower buttonMBuilt-in speakersNBluetooth indicator (page 16)OWIRELESS LAN indicator (page 16)PWWAN indicator* (page 16)QMuting indicator (page 16)* On selected models only.

13nNGetting StartedBackANetwork (Ethernet) port (page 73)BBattery connector (page 18)CDC IN port (page 17)Di.LINK (IEEE 1394) S400 port (page 71)

14nNGetting StartedRightAOptical disc drive (page 27)BOptical disc drive indicator (page 16)CManual eject hole (page 141)DSubstitute drive eject button (page 27)EMonitor (VGA) port (page 62)FWWAN antenna* (page 44)* On selected models only.

15nNGetting StartedLeftAHi-Speed USB (USB 2.0) ports* (page 68)BPC Card slot (page 34)CPC Card release button (page 36)DAir ventEModem port (page 43)* Supports high-/full-/low- speeds.

16nNGetting StartedBottom About the Indicator LightsYour computer is equipped with the following indicator lights.AAir ventsBPort replicator connector (page 58)CBattery release latch (page 21)Indicator FunctionsPower 1Illuminates when the power of the computer is on, blinks when the computer is in Standby mode, and turns off when the computer is in Hibernate mode or off.Battery eIlluminates when the computer is using battery power, blinks when the battery pack is running out of power, and double-blinks when the battery pack is charging.Media Access Illuminates when data is read from or written to a memory card. (Do not enter Standby mode or turn off the computer when this indicator is on.) When the indicator is off, the memory card is not being used.

17nNGetting Started Connecting a Power SourceYou can use either an AC adapter or a rechargeable battery pack as a power source for your computer.Optical disc drive Illuminates when data is read from or written to the optical disc. When the indicator is off, the optical disc is not being used.Muting %Illuminates when the volume is turned off.Hard disk drive Illuminates when data is read from or written to the hard disk. Do not enter Standby mode or turn off the computer when this indicator is on.Num lock Press the Num Lk key to activate the numeric keypad. Press it a second time to deactivate the numeric keypad. The numeric keypad is not active when the indicator is off.Caps lock Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key while the indicator is on. Press the key a second time to turn off the indicator. Normal typing resumes when the Caps lock indicator is off.Scroll lock Press the Scr Lk key to change how you scroll the display. Normal scrolling resumes when the Scroll lock indicator is off. The Scr Lk key functions differently depending on the program you are using and does not work with all programs. Bluetooth technology Illuminates when the WIRELESS switch is set to ON and Bluetooth technology is enabled.WIRELESS LAN Illuminates when the wireless LAN function is running.WIRELESS WAN*Illuminates when the wireless WAN function is enabled.* On selected models only.Indicator Functions

18nNGetting StartedUsing the AC Adapter✍Use your computer only with the supplied AC adapter.To use the AC adapter1Plug one end of the power cord (1) into the AC adapter (3).2Plug the other end of the power cord into an AC outlet (2).3Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the computer or on the (optional) port replicator.!The shape of the DC In plug varies depending on the AC adapter.✍To disconnect your computer completely from AC power, unplug the AC adapter.Make sure that the AC outlet is easily accessible.If you do not use your computer for a long period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 104). This power saving mode saves the time of shutting down or resuming. Using the Battery PackThe battery pack supplied with your computer is not fully charged at the time of purchase.

19nNGetting StartedInstalling the Battery PackTo install the battery pack1Turn off the computer and close the LCD screen lid.2Slide the battery pack into the battery compartment until it clicks into place.✍When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.!This computer is designed to operate only with genuine Sony batteries. Charging the Battery PackThe battery pack supplied with your computer is not fully charged at the time of purchase.To charge the battery pack1Install the battery pack.2Connect the AC adapter to the computer.The computer automatically charges the battery pack (the battery indicator light flashes in a double blink pattern as the battery pack charges). When the battery pack is about 85% charged, the battery indicator turns off.

20nNGetting Started✍When the battery pack is running out of power, both the battery and power indicator lights blink.Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the computer.If the battery level falls below 10%, you should either attach the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack.The battery pack supplied with your computer is a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect battery life.The battery indicator light is on while you use the battery pack as a power source. When battery life is nearly depleted, both the battery and power indicator lights start flashing.For some software applications and some peripheral devices, your computer may not enter Hibernate mode even when battery life is low. To avoid loss of data when using battery power, you should save your data frequently and manually activate a power management mode, such as Standby or Hibernate. If the battery pack wears out when the computer enters Standby mode, you will lose any unsaved data. Going back to the previous work state is impossible. To avoid loss of data, you should save your data frequently.When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet. Battery indicator light status MeaningOn The computer is using battery power.Blinks The battery pack is running out of power.Double blinks The battery pack is charging.Off The computer is using AC power.

21nNGetting StartedRemoving the Battery Pack!You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack while the computer is in Standby mode.To remove the battery pack1Turn off the computer and close the LCD screen lid.2Slide and hold the battery release latch (1) and slide the battery pack away from the computer.✍If the battery pack is stuck by the side spring locks, release one lock and then the other to remove the battery pack. Shutting Down Your Computer SafelyTo avoid losing unsaved data, be sure to shut down your computer properly, as described below.To shut down your computer1Turn off any peripherals connected to the computer.

22nNGetting Started2Click Start and then Turn Off Computer.The Turn off computer window appears.3Click Turn Off.4Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically.The power indicator light turns off.

23nNUsing Your VAIO ComputerUsing Your VAIO ComputerThis section describes how to get the most out of using your computer.❑Using the Keyboard (page 23)❑Using the Touch Pad (page 24)❑Using Special-function Buttons (page 25)❑Using the Optical Disc Drive (page 27)❑Using PC Cards (page 34)❑Using the Memory Stick Media (page 37)❑Using Other Memory Cards (page 41)❑Using the Internet (page 43)❑Using Wireless LAN (WLAN) (page 44)❑Using the Bluetooth Functionality (page 51)Using the KeyboardYour keyboard is very similar to a desktop computer keyboard, but has additional keys that perform model-specific tasks.Combinations and Functions with the Fn Key✍Some functions are not available before Windows is launched.

24nNUsing Your VAIO Computer Using the Touch PadThe keyboard contains a cursor-pointing device, the touch pad (1). You can point to, select, drag, and scroll objects on the screen using the touch pad.Combinations/Feature FunctionsFn + F1: wireless switching*Toggles among Bluetooth, Wireless LAN, and Wireless WAN functionalities.Fn + 8 (F5/F6): brightness control Adjusts the LCD brightness of your computer screen.To increase lightness intensity, press Fn+F6 and then M or ,, or keep pressing Fn+F6.To decrease lightness intensity, press Fn+F5 and then m or <, or keep pressing Fn+F5.Fn + /T (F7): display output Toggles among your computer screen, an external display, and simultaneous output to both.Fn + (F10): zoom Changes the screen resolution to magnify/restore your computer's screen view.✍The magnified view is not as clear as the standard view, as it is implemented by applying a lower resolution to the computer screen with a higher resolution.This key combination may not work with graphic images as it magnifies the screen view by changing the resolution.The location and size of software windows may change when the screen view is magnified or the standard view is restored because pressing this key combination changes the resolution.When your computer's screen view is magnified, switching the view to the external display disables the function and restores the standard view.Fn + (F12): Hibernate Provides for the lowest level of power consumption. When you execute this command, the states of the system and the peripheral devices are written to the hard disk and the system power is turned off. To return the system to its original state, use the power button to turn on the power.For details on power management, see Using the Power Saving Modes (page 102).* On selected models only.

25nNUsing Your VAIO Computer Using Special-function ButtonsYour computer is equipped with special buttons to help you use specific functions of the computer.The AV MODE, Play/Pause, Stop, Previous track, Next track, and Disc drive eject buttons support Instant Mode. To activate Instant Mode, the computer must be off. See the printed Instant Mode booklet for more information on the Instant Mode.Action DescriptionPoint Slide one finger on the touch pad to place the pointer (2) on an item or object.Click Press the left button (3) once.Double-click Press the left button twice.Right-click Press the right button (4) once. In many applications, this action displays a shortcut menu.Drag Slide one finger on the touch pad while pressing the left button.Scroll Move your finger along the right edge of the touch pad to scroll vertically. Move your finger along the bottom to scroll horizontally (the scroll function is available only with applications that support a touch pad scroll feature).

26nNUsing Your VAIO ComputerSpecial-function button FunctionsAV MODE button When Windows is NOT launched:Activates Instant Mode to enable you immediately to play CDs and DVDs without launching Windows. See the printed Instant Mode booklet for more information.When Windows is launched and running:Launches the WinDVD or VAIO Zone* software by default. You can change this button assignment with the AV Mode Button Settings utility. To start this utility, press and hold the AV MODE button. See the help file on the AV Mode Button Settings utility for more information.You need administrator rights on the computer to change the AV MODE button assignment.Play/Pause button This button is enabled in Instant Mode as well as when Windows is launched and running.Starts or pauses DVD playback with the WinDVD or VAIO Zone software or CD playback with the SonicStage software.Stop button This button is enabled in Instant Mode as well as when Windows is launched and running.Stops DVD playback with the WinDVD or VAIO Zone software or CD playback with the SonicStage software.Previous track button This button is enabled in Instant Mode as well as when Windows is launched and running.Plays the previous chapter/movie in the DVD during playback with the WinDVD or VAIO Zone software or the previous song in the CD during playback with the SonicStage software.Next track button This button is enabled in Instant Mode as well as when Windows is launched and running.Plays the next chapter/movie in the DVD during playback with the WinDVD or VAIO Zone software or the next song in the CD during playback with the SonicStage software.Disc drive eject button Ejects the optical disc drive tray.If this button does not work, try the substitute drive eject button on the optical disc drive.Muting button Turns the speaker and microphone volume on and off.Volume buttons(Volume up and Volume down)Increase and decrease the volume.

27nNUsing Your VAIO Computer Using the Optical Disc DriveYour computer is equipped with an optical disc drive.To insert a disc1Turn on the computer.2Press the disc drive eject button (1) to open the drive.The tray slides out.✍If the disc drive eject button does not work, try the substitute drive eject button on the optical disc drive.If power supply to the optical disc drive is disabled by VAIO Power Management, it will take a while to eject the drive tray. Note that the substitute drive eject button is disabled when the optical disc drive is not powered.When recovering your system, turn on your computer and press the substitute drive eject button on the optical disc drive. Insert your Recovery Disc into the optical disc drive, turn off the computer, and then turn on the computer again to launch the VAIO Recovery utility.3Place a disc in the middle of the tray with the label side facing upward and gently push it until the disc clicks into place.* Launches the VAIO Zone software if the software is preinstalled on your computer.Special-function button Functions

28nNUsing Your VAIO Computer4Close the tray by pushing it in gently.!Do not remove the optical disc when your computer is in a power saving mode (Standby or Hibernate). Doing so may cause the computer to malfunction.✍If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled CD/DVD program.Reading and Writing Optical DiscsYour computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive supports.PR: playable and recordableP: playable but not recordable–: not playable nor recordable

29nNUsing Your VAIO ComputerCD-ROMVideo CDMusic CDCD ExtraCD-R/RWDVD-ROMDVD-VideoDVD-R/RWDVD+R/RWDVD+R DLDVD-R DLDVD-RAMDVD±RW/±R DL/RAM PPPPPRPPPR*1 *2 PR PR*5 PR*6 PR*3 *4DVD±RW/+R DL/RAMPPPPPRPPPR*1 *2 PR PR*5 PPR*3 *4DVD±RW(Supporting DVD±R DL)PPPPPRPPPR*1 *2 PR PR*5 PR*6 –DVD±RW(Supporting DVD+R DL)PPPPPRPPPR*1 *2 PR PR*5 P–CD-RW/DVD-ROM PPPPPRPPPPPP–DVD-ROM PPPPPPPPPPP–*1 Supports writing data to DVD-R discs compliant with DVD-R for General Version 2.0/2.1.*2 Supports writing data to DVD-RW discs compliant with DVD-RW Version 1.1/1.2.*3 The DVD±RW/RAM disc drive on your computer does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with removable cartridge.*4 Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM Version 1.0 is not supported.DVD-RAM Version 2.2/12X-SPEED DVD-RAM Revision 5.0 disc is not supported.*5 Writing data to DVD+R DL (Double Layer) discs is available only on discs supporting DVD+R DL (Double Layer) recording.*6 Writing data to DVD-R DL (Dual Layer) discs is available only on discs supporting DVD-R DL (Dual Layer) recording.PR: playable and recordableP: playable but not recordable–: not playable nor recordableCD-ROMVideo CDMusic CDCD ExtraCD-R/RWDVD-ROMDVD-VideoBD-ROMDVD-R/RWDVD+R/RWDVD+R DLDVD-R DLDVD-RAM BD-R*9/RE*10

30nNUsing Your VAIO Computer!This product is designed to playback discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Please be aware that the audio side (non-DVD side) of a DualDisc may not play on this product because it does not conform to the CD Standard.!Due to the multiple formats of discs now available, when buying pre-recorded or blank discs for use with a VAIO computer, be sure to read the notices on the disc packaging carefully to check both playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee the compatibility of VAIO CD drives with discs that are not compliant with the official "CD" format standard (or "DVD" standard in relation to DVD drives). USING NON-COMPLIANT DISCS CAN CAUSE FATAL DAMAGE TO YOUR VAIO PC OR CREATE SOFTWARE CONFLICTS AND CAUSE SYSTEM HANGING.For inquiries about disc formats, contact the individual publisher of the pre-recorded disc or the manufacturer of the recordable disc.✍8cm disc writing is not supported.Notes on writing data to a disc❑To make data on a disc readable on the optical disc drive, you need to close the session before you eject it. To complete this process, follow the instructions included with your software.❑Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive.Blu-rayDisc DrivePPPPPR*8 PPPPR*1 *2 PR PR*5 PR*6 PR*6 PR*7*7 Supports writing data to BD-R Version 1.1 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB) and BD-RE Version 2.1 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB). The Blu-ray disc drive on your computer does not support BD-RE Version 1.0 discs and Blu-ray cartridge discs.*8 Writing data to Ultra Speed CD-RW discs is not supported.*9 BD-R stands for Blu-ray Disc-Recordable in Version 1.1 format.*10 BD-RE stands for Blu-ray Disc-Rewritable in Version 2.1 format.

31nNUsing Your VAIO Computer❑Do not strike or shake your computer while writing data to a disc.❑Deactivate the screen saver and exit anti-virus software before writing data to a disc.❑Do not use memory-resident utility software while writing data to a disc. This may cause your computer to malfunction.❑When using your software application to burn discs, make sure you exit and close all other applications.❑Never touch the surface of the disc. Fingerprints and dust on the surface of a disc may cause writing errors.❑Do not switch power modes while using the preinstalled software and while using the CD burning software.❑Never affix an adhesive label to discs. This will affect the use of the disc irreparably.❑Connect and use the AC adapter to power your computer or make sure your battery pack is at least 50 percent charged.❑Use only Sony Value-added software when writing to CD/DVD media. (Ex: Click to DVD) Other software programs may not be fully compatible and errors may result.Notes on playing DVDsTo achieve optimum performance when playing DVDs, you should follow these recommendations.❑You can play DVDs using the optical disc drive and the DVD playback software, such as VAIO Zone or WinDVD. See the help file on such software for details.❑Close all open applications before playing a DVD movie.❑Do not use memory-resident utility software to speed up disc access when playing a DVD. This may cause your computer to malfunction.❑Deactivate the screen saver and exit anti-virus software before playing a disc.❑Some discs recorded at 20 or 24 bits may produce noise while playing. If you have audio devices connected, this may damage your hearing and the speakers. Reduce the volume before playing a DVD.❑Do not switch to power saving modes while your computer is playing a DVD.

32nNUsing Your VAIO Computer❑Region code indicators are labeled on the DVDs to indicate in which region and on what type of player you can play the disc. If the DVD is labeled "all," this means that you can play this DVD in most regions of the world. If the region code of your residence area is different from the label on the DVD disc or on the packaging, you cannot play the disc on your computer. !You can change the DVD region code only a limited number of times. When you have exceeded this number, the drive's DVD region code is permanently assigned and you will not be able to change it again. Reconfiguring your computer does not reset this count.If you change the DVD region code while the WinDVD software is running, restart the software or eject the disc and re-insert it to make the new setting effective.❑If your computer has the Wireless LAN functionality and Wireless LAN is activated, playing DVDs may cause some interruptions in audio and video.❑When you are playing a DVD (video or audio) and you want to remove a USB device, such as USB-compatible speakers, make sure you stop the DVD first. Removing a USB-compatible device during DVD (video or audio) playback may cause a malfunction. Playing CDsTo play an audio CD1Insert a disc into the optical disc drive. 2If nothing appears on the desktop, then click Start, point to All Programs, and click to start the desired CD software, such as the SonicStage software.If the Audio CD window appears, click to select an option.

33nNUsing Your VAIO ComputerCopying Files to CDsTo copy files to a disc!Do not strike or shake your computer while writing data to a disc.1Insert a blank disc into the optical disc drive.If the CD Drive window appears, click Take no action and then click OK.2Right-click Start and then click Explore.3In the Folders panel on the left, locate the file(s) or folder(s) you want to copy, right-click the file(s) or folder(s), point to Send To, and then click the optical disc drive* name.4Close the window.5Click Start and then My Computer.6Click the optical disc drive icon under Devices with Removable Storage. A new window appears with the file(s) or folder(s) you want to copy listed under Files Ready to Be Written to the CD.7In the CD Writing Tasks box, click Write these files to CD. 8Follow the instructions in the CD Writing Wizard.* The read/write drive letter designation may vary, depending on your system's hardware configuration. Playing DVDsTo play a DVD1Close all running software applications.2Insert a DVD into the optical disc drive.

34nNUsing Your VAIO Computer3If nothing appears on the desktop, then click Start, point to All Programs, and click to start the desired DVD software to play the DVD.For instructions on how to use the software, see the help file on your DVD software. Copying Files to DVDsTo copy files to a disc1Connect the AC adapter to the computer.2Insert a disc into the optical disc drive.3If nothing appears on the desktop, then click Start, point to All Programs, and click to start the DVD software you want to use.For instructions on how to use the software, see the help file on your DVD software. Using PC CardsPC Cards allow you to connect portable external devices to your computer.Inserting a PC Card!Some PC Cards or their functions may not be compatible with your computer.You do not need to shut down your computer before inserting or removing a PC Card.To insert a PC Card1Push the PC Card release button so that the release button pops out.2Push the PC Card release button a second time so that the PC Card slot protector pops out.

35nNUsing Your VAIO Computer3Gently take hold of the protector and pull it out of the slot.4Insert the PC Card into the PC Card slot with the front label facing upward.5Gently push the PC Card into the slot.The PC Card is automatically detected by your system.The Safely Remove Hardware icon appears on the taskbar.!Insert the PC Card slot protector to protect against debris entering the slot when not using a PC Card. Before moving your computer, make sure to insert the PC Card slot protector into the slot.

36nNUsing Your VAIO Computer✍Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you alternate between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not recognized. Restart your system to correct the problem. Restarting will restore the original state of your computer.While the card is inserted, your computer may not enter Hibernate power management mode. It may enter Standby mode. We recommend that you remove the card before the computer enters Hibernate mode.Make sure you use the most recent software driver provided by the PC Card manufacturer.If an "!" mark appears on the Device Manager tab in the System Properties window, remove the software driver and then reinstall it.Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC Card in the correct direction. See the manual that came with your PC Card for more information. Removing a PC CardFollow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly.To remove a PC Card✍To remove a PC Card when your computer is off, skip steps 1 to 6.1Double-click the Safely Remove Hardware icon on the taskbar.The Safely Remove Hardware window appears.2Select the hardware you want to unplug.3Click Stop.The Stop a Hardware Device window appears.

37nNUsing Your VAIO Computer4Confirm that the device can be safely removed from the system.5Click OK.A window appears, explaining that it is safe to remove the device.6Click Close.7Push the PC Card release button so that the release button pops out.8Push the PC Card release button a second time so that the PC Card pops out.9Gently take hold of the Card and pull it out of the slot.10 If the PC Card release button is still out, push it back in. Using the Memory Stick MediaYour computer supports the Memory Stick media. Memory Stick media is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and other devices. Because it is removable, it can be used for external data storage.For the latest information on Memory Stick media, visit the Sony online support Web site at:http://esupport.sony.com/EN/VAIO/ for customers in USA, http://www.sony.ca/support for customers in Canada, http://esupport.sony.com/ES/VAIO/ for customers in Latin American countries or areas, orhttp://esupport.sony.com/ES/VAIO/BR/ for customers in Brazil.

39nNUsing Your VAIO ComputerInserting a Memory Stick MediaTo insert a Memory Stick media1Hold the Memory Stick media with the arrow facing upward and pointing toward the Memory Stick PRO/Duo media slot.2Carefully slide the Memory Stick media into the slot until it clicks into place.The Memory Stick media is automatically detected by your system and appears in your My Computer window as a local drive, under the appropriate letter (depending on the configuration of the computer).!Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the Memory Stick media, do not force the Memory Stick media into the slot if you cannot insert it smoothly.Do not insert more than one Memory Stick media into the slot. Inserting the media improperly may damage your computer. ✍Your computer supports Memory Stick Duo media and is equipped with the Memory Stick PRO/Duo slot that is compatible with both standard- and duo-size media. For more information on the Memory Stick Duo media, visit the Memory Stick web site at http://www.memorystick.com/en/.You can insert a Memory Stick Duo media directly into the slot.

40nNUsing Your VAIO ComputerTo view the contents of the Memory Stick media1Click Start and then My Computer to open the My Computer window. 2Double-click the Memory Stick media icon to view the list of data files saved in the Memory Stick media.To format a Memory Stick mediaUse the Memory Stick Formatter software. See the help file on the Memory Stick Formatter software for details.!Formatting the Memory Stick media erases the entire data on the media. Avoid accidental erasure of your valuable data.Do not remove the Memory Stick media from the slot while formatting the media. This could cause a malfunction.Be sure to use the preinstalled Memory Stick Formatter software to format a Memory Stick media. In case the media is formatted with the formatting function of the Windows operating system, the media cannot be recognized by other Memory Stick devices. Removing a Memory Stick MediaTo remove a Memory Stick media1Check that the Media Access indicator is off.2Push the Memory Stick media in toward the computer.The Memory Stick media ejects.3Pull the Memory Stick media out of the slot.!Always remove the Memory Stick media gently, or it may pop out unexpectedly.Do not remove the Memory Stick media while the Media Access indicator is turned on. If you do, you may lose data. Large volumes of data may take time to load, so be sure the indicator is off before removing the Memory Stick media.

41nNUsing Your VAIO ComputerUsing Other Memory CardsIn addition to the Memory Stick PRO/Duo media slot, your computer is equipped with an SD memory card/MultiMediaCard (MMC) slot to accommodate other memory cards. You can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices.Before You Use Memory CardsThe SD memory card/MultiMediaCard (MMC) slot on your computer supports the following memory cards:❑MultiMediaCard (MMC)❑Secure Digital (SD)For the latest information on compatible memory cards, visit the Sony online support Web site regularly.!Always insert the correct memory card into the SD memory card/MultiMediaCard (MMC) slot.SDHC memory cards are not supported.Do not attempt to insert a memory card or memory card adapter of a different type into the slot. An incompatible memory card or memory card adapter may be difficult to remove from the slot and can cause damage to your computer.Use care when inserting or removing a memory card from the slot. Do not force the memory card in or out of the slot.The SD memory card/MultiMediaCard (MMC) slot on your computer does not support the high-speed data transfer feature of the SD memory card.Your computer has been tested and found compatible only with major memory card media available as of May 2006. However, not all memory card media that meet the same conditions as the compatible media are guaranteed of compatibility.

42nNUsing Your VAIO ComputerInserting a Memory CardTo insert a memory card1Locate the SD memory card/MultiMediaCard (MMC) slot on the front of the computer.2Hold the memory card with the arrow facing upward and pointing toward the memory card slot.3Carefully slide the memory card into the slot until it clicks into place.Do not force the card into the slot.✍If the memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.Removing a Memory Card!Do not remove a memory card while the Media Access indicator light is on. The card or its data may become damaged.To remove a memory card1Check that the Media Access indicator is off.2Press the extended part of the memory card, causing it to extend out from the slot.3When the card extends, carefully pull it out of the slot.

43nNUsing Your VAIO ComputerUsing the InternetSetting Up a Dial-up Internet ConnectionBefore you can connect to the Internet, you need to connect your computer to a telephone line with a telephone cable (may not supplied). Once you have set up your telephone cable connection, you're ready to connect to the Internet.To connect a telephone cable1Plug one end of the phone cable (1) into the modem port on the computer.2Plug the other end into the wall jack (2).✍Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem.If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly.To set up a dial-up connection to the Internet1Click Start, point to All Programs, Accessories, Communications, and click New Connection Wizard.The New Connection Wizard appears.2Click Next. If the Location Information window appears, follow the on-screen instructions.3If it is not already selected, click to select Connect to the Internet, and click Next.4Follow the on-screen instructions.

44nNUsing Your VAIO Computer Using Wireless LAN (WLAN)Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each other through a powerful network. A WLAN is a network in which a user can connect to a local area network (LAN) through a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and roaming. You can still access information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to another.You can communicate without an access point, which means that you can communicate between a limited number of computers (ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure network (infrastructure).❑Wireless WAN model usersPlease see the SmartWi Connection Utility Guide for setting up Wireless LAN and Wireless WAN functionalities.❑Other model usersPlease see the following for setting up Wireless LAN functionality.✍In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the WLAN functionality, read the Safety Information carefully.WLAN uses the IEEE 802.11a*/b/g standard, which specifies the used technology. The standard includes the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi Protected Access 2 (WPA2), and Wi-Fi Protected Access (WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2 and WPA are specifications of standards based, interoperable security enhancements that increase the level of data protection and access control for existing Wi-Fi networks. WPA has been designed to be forward compatible with the IEEE 802.11i specification. It utilizes the enhanced data encryption TKIP (Temporal Key Integrity Protocol) in addition to user authentication using 802.1X and EAP (Extensible Authentication Protocol). Data encryption protects the vulnerable wireless link between clients and access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption, virtual private networks, and authentication. WPA2, the second generation of WPA, provides stronger data protection and network access control and is also designed to secure all versions of 802.11

45nNUsing Your VAIO Computerdevices, including 802.11b, 802.11a, and 802.11g, multi-band and multi-mode. In addition, based on the ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of Standards and Technology (NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2 is backward compatible with WPA.* See the online Specifications to see whether your model supports the IEEE 802.11a standard.Wireless LAN devices using the IEEE 802.11a standard and the ones using the IEEE 802.11b or g standard cannot communicate because the frequencies are different.IEEE 802.11b: The standard speed is 11 Mbps, or about 30 to 100 times faster than a standard dial up.IEEE 802.11a/g: The standard speed is 54 Mbps, or about 5 times faster than a Wireless LAN device using the IEEE 802.11b standard.The 2.4 GHz bandwidth used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference from other devices that use the same bandwidth are employed on wireless LAN compatible devices, such interference may cause lower communication speed, narrower communication range, or broken wireless connections.The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions.The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use.Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference. Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with IEEE 802.11b products.When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase the communication speed.

46nNUsing Your VAIO ComputerCommunicating without an Access Point (Ad-hoc)An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other central controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home.❑If the Wireless connection is initiated by the VAIO computer, channel 11 will be selected.❑If the Wireless connection is initiated by peer Wireless LAN equipment, the Wireless LAN communication will make use of the channel selected by the peer Wireless LAN equipment.To communicate without an access point (ad-hoc)1Turn on the WIRELESS or WIRELESS LAN switch.The WIRELESS LAN indicator lights up.Except in Peru and Venezuela, you cannot select the 5 GHz bandwidth, which is used for the IEEE 802.11a standard, on ad-hoc networks.On models that support the Bluetooth functionality*1 and/or the IEEE 802.11a/b/g standard*1, double-click ( / ) on the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.2Click Start and then Control Panel.

47nNUsing Your VAIO Computer3Click Network and Internet Connections.4Click Network Connections.The Network Connections window appears.5Right-click Wireless Network Connection, then click Properties.The Wireless Network Connection Properties window appears.6Select the Wireless Networks tab.7Click the Add… button.The Wireless network properties window appears.8Enter a network name (SSID)*2.You can choose a 32-digit alphanumeric name.9Select Open from the Network Authentication drop-down box.10 Select WEP from the Data Encryption drop-down box.11 Deselect the The key is provided for me automatically option button.Some information becomes visible.12 Enter the network key*2.The network key should be 5 or 13 alphanumeric characters or 10 or 26 hexadecimal*3 characters long. You can choose whichever you want.13 Enter exactly the same network key again for confirmation.14 Select the check box This is a computer-to-computer (ad hoc) network; wireless access points are not used at the bottom of the window.15 Click OK.Your network name appears in the Preferred networks.

48nNUsing Your VAIO Computer16 Click Advanced.The Advanced window appears.17 Select the Computer-to-computer (ad hoc) networks only option button.18 Click Close.19 Click OK.The computer is ready to communicate with another computer.*1 See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.*2 If you want to communicate between two or more computers, you need to configure all these computers in the exact same way. This means that you need to enter the same network name and the same network key on all computers as on the first computer you configure.*3 Hexadecimal: a number representation using the digits 0-9, with their usual meaning, and the letters A-F (or a-f) to represent hexadecimal digits with values of (decimal) 10 to 15.✍An ad-hoc network does not support WPA.To disconnect from a computer-to-computer (ad-hoc) network1Click Start and then Control Panel.2Click Network and Internet Connections.3Click Network Connections.The Network Connections window appears.4In the right panel under LAN or High-Speed Internet, right-click Wireless Network Connection.5Click Properties.The Wireless Network Connection Properties window appears.6On the Wireless Networks tab, click Advanced.The Advanced window appears.

49nNUsing Your VAIO Computer7Click to select Any available network (access point preferred), and click Close.8Click OK.9Close the Network Connections window.10 Turn off the WIRELESS or WIRELESS LAN switch. Communicating with an Access Point (Infrastructure)An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access point, for example the Sony Access Point. The access point bridges the wireless and wired LAN and acts as a central controller for the Wireless LAN. The access point coordinates transmission and reception from multiple wireless devices within a specific range.The access point will select which channel to use on an infrastructure network.!For details on how to select the channel that will be used by the access point, see the manual that came with your access point.

50nNUsing Your VAIO ComputerTo connect to a wireless network1Make sure an access point is set up.See the manual that came with your access point for more information.2Turn on the WIRELESS or WIRELESS LAN switch.The WIRELESS LAN indicator lights up.On models that support the Bluetooth functionality* and/or the IEEE 802.11a/b/g standard*, double-click ( / ) on the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.3Click Start and then Control Panel.4Click Network and Internet Connections.5Click Network Connections.6In the right panel under LAN or High-Speed Internet, double-click Wireless Network Connection.The Wireless Network Connection window appears.7Follow the on-screen instructions.* See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.To connect to a wireless network (models with the Wireless Setup Utility software only)Use the Wireless Setup Utility software to guide you through the set up process and provide you with more detailed information about wireless connections.1Make sure an access point is set up.See the manual that came with your access point for more information.2Turn on the WIRELESS or WIRELESS LAN switch.The WIRELESS LAN indicator lights up.

51nNUsing Your VAIO ComputerOn models that support the Bluetooth functionality* and/or the IEEE 802.11a/b/g standard*, double-click ( / ) on the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.3Click Start, point to All Programs, and click Wireless Setup Utility.The Wireless Setup Utility appears.4Follow the on-screen instructions.* See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.To disconnect from a wireless networkTurn off the WIRELESS or WIRELESS LAN switch.!Turning off the wireless LAN functionality while accessing remote documents, files, or resources may result in data loss.✍For WPA-PSK or WPA2-PSK authentication, you must enter a network key of 8 to 64 alphanumeric characters long. Using the Bluetooth FunctionalityYou can establish wireless communication between your computer and other Bluetooth devices such as another computer or a mobile phone. You can transfer data between these devices without cables and up to 33 feet (10 meters) range in open space.❑Wireless WAN model usersPlease see the SmartWi Connection Utility Guide for setting up Bluetooth functionality.❑Other model usersPlease see the following for setting up Bluetooth functionality.To connect to a Bluetooth device1Turn on the WIRELESS switch.

52nNUsing Your VAIO Computer2Double-click ( / ) on the taskbar to display the Wireless Device Switch window.3Select the Enable Bluetooth Device option.4Click OK.Notes on using the Bluetooth functionality❑The data transfer rate varies, depending on the following conditions:❑Obstacles, such as walls, located between devices❑Distance between devices❑Material used in walls❑Proximity to microwaves and cordless telephones❑Radio frequency interference and other environmental conditions❑Device configuration❑Type of software application❑Type of operating system❑Use of both Wireless LAN and Bluetooth functionalities at the same time on your computer❑Size of file being exchanged❑Note that due to limitations of the Bluetooth standard, large files may occasionally be corrupted during continuous transfer due to electromagnetic interference from the environment.❑All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may not be possible in all situations.

53nNUsing Your VAIO Computer❑As general characteristics of Bluetooth technology, video and audio may go out of synchronization if you play videos on your computer with audio output from the connected Bluetooth device.❑The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous use of the Bluetooth functionality and wireless communication devices, however, may cause radio interference and result in poorer communication speeds and distances than the standard values.❑The Bluetooth functionality may not work depending on the third party devices or the software version used by third party companies.❑As general characteristics of Bluetooth technology, connecting multiple Bluetooth devices to your computer may cause bandwidth congestion, resulting in poor performance of the devices.Bluetooth SecurityThe Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to communicate. With the authentication function, you can avoid any anonymous Bluetooth device to access your computer.The first time two Bluetooth devices communicate, a common passkey (a password required for authentication) should be determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.✍The passkey can be different each time, but must be the same at both ends.For certain devices, such as a mouse, no passkey can be entered.Communicating with Another Bluetooth DeviceYou can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a mouse, or a digital camera without the use of any cables.

54nNUsing Your VAIO ComputerTo communicate with another Bluetooth deviceTo communicate with another Bluetooth device, you need first to set up the Bluetooth functionality. For setting up and using the Bluetooth functionality, see the help file on the Bluetooth utility software.To see the help file1Right-click the Bluetooth icon on the taskbar, and select Help from the menu.Stopping the Bluetooth ConnectionTo stop the Bluetooth connection, turn off the WIRELESS switch. The Bluetooth indicator turns off.

55nNUsing Your VAIO ComputerUsing the Bluetooth HeadsetThe Bluetooth headset is available as an optional accessory. It will come in handy during a video conference over the Internet using instant messaging software, for example Windows Messenger. For details on using the Bluetooth headset, see the manual that came with your Bluetooth headset.To connect the headset with your computer1Press and hold the headset power button for at least five seconds to turn on the Bluetooth headset.2Press and hold the volume buttons for at least five seconds until the indicator light blinks in red and green.3Right-click the Bluetooth icon on the taskbar and select Bluetooth Settings from the menu.The Bluetooth Settings window appears and Add New Connection Wizard automatically starts.4If the Add New Connection Wizard window does not appear, click New Connection.The Add New Connection Wizard window appears.5Select Express Mode [Recommended] and then click Next.The wizard searches for Bluetooth devices in range and lists available devices, if any.6Select HBH-608 and then click Next.The Bluetooth Manager-Bluetooth Security window appears when a connection is established.7Enter "0000" for Bluetooth Passkey (PIN) and then click OK.8Press the headset power button.9Click Finish.The headset icon appears in the Bluetooth Settings window.10 Click the headset icon and then press the headset power button.The computer should now be ready to communicate with the Bluetooth headset.

56nNUsing Your VAIO ComputerTo disconnect the headset from your computer1Right-click the Bluetooth icon on the taskbar and select Bluetooth Settings from the menu.The Bluetooth Settings window appears.2Select HBH-608, click Next, and select Disconnect from the Bluetooth menu.3Click Yes.

57nNUsing Peripheral DevicesUsing Peripheral DevicesYou can add functionality to your computer by using the various ports on the computer.❑Connecting a Port Replicator (page 57)❑Connecting External Speakers (page 61)❑Connecting an External Display (page 62)❑Selecting Display Modes (page 65)❑Using the Multiple Monitors Function (page 66)❑Connecting an External Microphone (page 67)❑Connecting a Universal Serial Bus (USB) Device (page 68)❑Connecting a Printer (page 70)❑Connecting an i.LINK Device (page 71)❑Connecting to a Network (LAN) (page 73)Connecting a Port ReplicatorAttaching a port replicator enables you to connect additional peripherals to your computer, such as a printer and an external display.A port replicator may be supplied with your computer, depending on the model you purchased. If not, you can additionally purchase an optional port replicator.See the online Specifications to see whether your model is supplied with a port replicator.

58nNUsing Peripheral DevicesLocating Ports on the Port Replicator!The port replicator can be powered only through the AC adapter supplied with your computer. Do not unplug the AC adapter from the port replicator and the AC outlet while using the port replicator; this may cause data damage or hardware malfunctions. Attaching Your Computer to the Port ReplicatorTo attach your computer to the port replicator!To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator.1Disconnect all peripherals from the computer.2Plug the power cord (1) into the AC adapter (2) and an AC outlet.3Plug the cable attached to the AC adapter (2) into the DC IN port (3) on the port replicator (4).ADC IN port (page 17)BNetwork (Ethernet) port (100BASE-TX / 10BASE-T) (page 73)CMonitor (VGA) port (page 62)DHi-Speed USB (USB 2.0) ports* (page 68)* Supports high-/full-/low- speeds.

59nNUsing Peripheral Devices4Open the port replicator connector cover on the bottom of the computer.5Align the bottom connector of the computer with the connector on the port replicator and push down until it clicks into place.

60nNUsing Peripheral Devices6Turn on the computer.!Use the AC adapter supplied with your computer.Do not move your computer while attached to the port replicator; this may detach the port replicator and cause damage to the port replicator and the computer. Disconnecting Your Computer from the Port Replicator!To prevent loss of unsaved data, be sure to turn off your computer before disconnecting it from the port replicator.To disconnect your computer from the port replicator1Turn off the computer and the connected peripherals.2Lift the computer away from the port replicator.

61nNUsing Peripheral Devices3Close the port replicator connector cover on the bottom of the computer.✍It is extremely important to close the port replicator connector cover after disconnecting your computer from the port replicator. If the cover is left open, dust may get inside and damage the computer.To disconnect the port replicator completely from AC power, unplug the AC adapter. Connecting External SpeakersYou can enhance the sound quality of your computer by connecting external speakers.To connect external speakers1Plug the speaker cable (1) into the headphones jack (2) i.2Plug the other end of the speaker cable to the external speaker (3).3Turn down the volume of the speakers before you turn them on.

62nNUsing Peripheral Devices✍Make sure your speakers are designed for computer use.!Do not place floppy disks on the speakers; their magnetic field may damage the data on the disks. Connecting an External DisplayYou can connect an external display to your computer. For example, you can use the computer with a computer display or a projector.✍Connect the power cord after connecting all other cables.Connected external displays are used as secondary screens.On Windows systems only, you can also use an external display to set up multiple monitors.Connecting a Computer DisplayYou can connect a computer display (monitor) either directly to your computer or via the (optional) port replicator.

63nNUsing Peripheral DevicesTo connect a computer display1If necessary, plug one end of the display's power cord (1) into your display, and the other end into an AC outlet.2If you want to connect a VGA monitor, plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the port replicator. Connecting a Multimedia Computer DisplayYou can connect a multimedia computer display that includes built-in speakers and a microphone directly to your computer or via the (optional) port replicator.To connect a multimedia computer display1Plug the power cord of your multimedia computer display (1) into an AC outlet.2Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the port replicator.3Plug the speaker cable (4) into the headphones jack (5) i on the computer.4Plug the microphone cable (6) into the microphone jack (7) m on the computer.

64nNUsing Peripheral Devices Connecting a ProjectorYou can connect a projector (for example, the Sony LCD projector) directly to your computer or via the (optional) port replicator.To connect a projector1Connect the power cord (1) of your projector into an AC outlet.2Plug an RGB signal cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the port replicator.3Plug an audio cable (4) (not supplied) into the headphones jack (5) i.4Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).

65nNUsing Peripheral Devices Selecting Display ModesYou can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected to your computer.If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors Function (page 66) for more information.To select a display1Right-click on the desktop to display the context menu.2Click the menu item for graphic properties.

66nNUsing Peripheral Devices3Follow the on-screen instructions to change the settings. ✍You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the type of your external display or projector.Before turning on your computer, turn on the peripheral devices. Using the Multiple Monitors FunctionThe Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have an external display attached to the monitor (VGA) port, your computer screen and the external display can function as a single desktop.You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window or a toolbar, from one display to the other.

67nNUsing Peripheral Devices✍Your external display may not support the Multiple Monitors function.Certain software applications may not be compatible with Multiple Monitors settings.Make sure that your computer does not enter Standby or Hibernate mode while you are using Multiple Monitors mode; otherwise the computer may not return to Normal mode.If you set different colors on each display, do not divide one single window on two displays; otherwise your software may not work properly.Set fewer colors or a lower resolution for each display.To select the Multiple Monitors mode1Right-click on the desktop to display the context menu.2Click the menu item for graphic properties.3Follow the on-screen instructions to change the settings.✍Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors mode. Connecting an External MicrophoneIf you need to use a sound input device (for example, to chat over the Internet) you need to plug in an external microphone.To connect an external microphonePlug the microphone cable (1) into the microphone jack (2) m.

68nNUsing Peripheral Devices✍Make sure your microphone is designed for computer use. Connecting a Universal Serial Bus (USB) DeviceTo prevent your computer and/or USB devices from damage, observe the following:❑When moving the computer with USB devices connected, avoid any shock or force to the USB ports.❑Do not put the computer into a bag or carrying case when it has USB devices connected.Connecting a USB MouseTo connect a USB mouse1Choose the USB port (1) you prefer to use.2Plug the USB mouse cable (2) into the USB port.You can now use your USB mouse (3).

69nNUsing Peripheral Devices✍The VAIO USB mouse software driver is preinstalled on your computer. As a result, you only need to plug the USB mouse into the USB port and you can start working. Connecting a USB Floppy Disk DriveYou can purchase a USB floppy disk drive and connect it to your computer.To connect a USB floppy disk drive1Choose the USB port (1) you prefer to use.2Plug the USB floppy disk drive cable (2) into the USB port.Your USB floppy disk drive (3) is now ready for use.!When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.

70nNUsing Peripheral DevicesDisconnecting a USB floppy disk driveYou can disconnect a USB floppy disk drive when your computer is on or off. Disconnecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction.If the computer is off, you can unplug the USB cable directly from the computer.To disconnect a USB floppy disk drive1Close all programs accessing the floppy disk drive.2Double-click the Safely Remove Hardware icon on the taskbar. The Safely Remove Hardware window appears.3Select the floppy disk drive you want to unplug.4Click Stop. The Stop a Hardware device window appears.5Make sure the floppy disk drive is selected, and click OK. A message appears stating it is now safe to remove the hardware device.6Click Close to close the Safely Remove Hardware window.7Disconnect the floppy disk drive from the computer. Connecting a PrinterYou can connect a Windows-compatible printer to your computer to print documents.Connecting a Printer Using the USB PortYou can connect a USB printer compatible with your version of Windows to the computer.

71nNUsing Peripheral DevicesTo connect a printer using the USB port1Plug the power cord (1) of your printer into an AC outlet.2Choose the USB port (3) you prefer to use.3Plug one end of a USB printer cable (2) (not supplied) into the USB port and the other end to your printer. Connecting an i.LINK DeviceNotes on connecting i.LINK devices❑Your computer is equipped with an i.LINK port, which you can use to connect to an i.LINK device such as a digital video camcorder or to connect two VAIO computers in order to copy, delete or edit files.❑The i.LINK port on your computer does not supply power to external devices generally powered by i.LINK ports.❑The i.LINK port supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of the external device.❑i.LINK cables compatible with your computer include cables with the following part numbers:VMC-IL4415 (a 1.5 meter cable with a 4-pin connector at each end) and VMC-IL4408 Series (a 0.8 meter cable with a 4-pin connector at each end).❑The optional i.LINK cables may not be available, depending on the country or area of your residency.

72nNUsing Peripheral Devices❑An i.LINK connection with other compatible devices is not fully guaranteed.❑The i.LINK connection varies depending on the software applications, operating system, and i.LINK-compatible devices you use. See the manual that came with your software for more information.❑Check the working conditions and OS compatibility of i.LINK-compatible PC peripherals (for example, an HDD or a CD-RW drive) before you connect them to your computer.Connecting a Digital Video CamcorderTo connect a digital video camcorder1Plug one end of an i.LINK cable (1) (not supplied) into the i.LINK port (2) on the computer and the other end into the DV In/Out ports (3) on the digital video camcorder.2Launch the DVgate Plus software.

73nNUsing Peripheral Devices✍On Sony digital video cameras, ports labeled DV Out, DV In/Out, or i.LINK are i.LINK-compatible.The Sony digital video camcorder shown here is an example; your digital video camcorder may need to be connected differently.You cannot access the pictures stored on a Memory Stick media when using an i.LINK connection. Connecting to a Network (LAN)You can connect your computer to 100BASE-TX/10BASE-T-type networks with an Ethernet network cable. Connect one end of a network cable (not supplied) to the network (Ethernet) port on the computer or the (optional) port replicator and the other end to your network. For detailed settings and devices needed to connect to the network, ask your network administrator.✍Your computer can be connected to the network with the default settings.

74nNUsing Peripheral Devices!Telephone lines cannot be connected to the network (LAN) connector on your computer.If the network (LAN) connector is connected to the telephone lines mentioned below, high electric current to the connector may cause damage, overheating, or fire.- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)- Public telephone subscriber line- PBX (private branch exchange)!Do not plug a telephone cable into the network port.

81nNCustomizing Your VAIO Computer5Enter the current password for Enter Current Hard Disk Master Password and press the Enter key, leaving everything else blank.6Press the Enter key when the success message appears.7Press the Esc key.8Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.On the Setup Confirmation screen, make sure that Yes is selected and then press the Enter key. Adding the Windows PasswordThe Windows password comes in handy when you have to share a single computer with other people. By setting the Windows password, you can protect your user account from unauthorized access.Entry of the Windows password will be prompted after you select your user account.!Make sure not to forget the password. Write down your password and keep it safe and private from other people.✍If you have set the Windows password in conjunction with the fingerprint authentication functionality, you can substitute fingerprint recognition for password entry when turning on your computer. For more information, see Using Fingerprint Authentication (page 83).To add the Windows password1Click Start and then Control Panel.2Click the User Accounts icon.3Click your user account under or pick an account to change.4Click Create a password.5In the Type a new password and Type the new password again to confirm fields, enter the password for your account.6Click Create Password.

82nNCustomizing Your VAIO Computer✍See Help and Support Center for more information on the Windows password. Changing/Removing the Windows PasswordTo change the Windows password1Click Start and then Control Panel.2Click the User Accounts icon.3Click your user account under or pick an account to change.4Click Change my password.5Enter the current password under Type your current password.6Enter a new password under Type a new password and the same password under Type the new password again to confirm.7Click Change Password.To remove the password1Click Start and then Control Panel.2Click the User Accounts icon.3Click your user account under or pick an account to change.4Click Remove my password.5Enter the current password that you want to remove.6Click Remove Password.

83nNCustomizing Your VAIO ComputerUsing Fingerprint AuthenticationYour computer is equipped with a fingerprint sensor to provide you with additional convenience. A small horizontal bar located at the lower right of the keyboard is the sensor of the fingerprint reader and will be referred to as the fingerprint sensor hereinafter.Once you have registered your fingerprint(s), the fingerprint authentication functionality offers:❑A substitute for password entryYou can log onto your password-protected system without entering the power-on, hard disk, and Windows passwords. If you share a computer with other people, you can skip user selection as well.❑Quick web-site accessOnce you have registered your user information (user accounts, passwords, etc.) for web sites in the password bank, you can substitute fingerprint authentication for entering required information and access the password-protected web sites.❑Access to the encrypted (locked) My Safe folderThe My Safe folder is provided to protect your data against unauthorized access. With the fingerprint authentication functionality, you can decrypt (unlock) this folder to access your data.❑Quick application accessOnce you have assigned an application to your finger, you can then swipe the finger across the fingerprint sensor to launch the assigned application.Precautions on Using Fingerprint Authentication❑The fingerprint authentication technology does not assure 100% verification.Sony assumes no liabilities for any problems and damages arising out of your use of or inability to use the fingerprint sensor.❑The fingerprint authentication technology does not assure complete protection of your data and hardware.Sony assumes no liabilities for any problems and damages arising out of your use of or inability to use the fingerprint sensor.

84nNCustomizing Your VAIO Computer❑The fingerprint recognition rate depends on your operating conditions and varies among individuals as well.❑Make sure to make a backup copy of the data stored on the hard disk, especially in the My Safe folder, before sending your computer for repair.Sony assumes no liabilities for any loss or modification of your data that might have occurred during the course of repair.❑The hard disk may be initialized and returned after the repair work and, in such a case, you will not be able to restore your fingerprint templates.❑The maintenance and management of data concerning fingerprint authentication must be carried out at your own risk.Sony assumes no liabilities for any defects arising out of your data maintenance and management.❑When enrolling your fingerprint(s), keep the following in mind:❑Enroll more than one fingerprint in case of inability to recognize the fingerprint due to injury.❑You may not be able to enroll your fingerprint(s) due to some biological factors.❑Up to 10 fingerprints can be enrolled per person.Note that up to 21 fingerprints can be enrolled on a first-come, first-served basis for logging on to your system using the Boot Security functionality. If you share your computer with other people, you may not be able to use your enrolled fingerprint to log on to your system.❑When swiping your finger across the fingerprint sensor, keep the following in mind:❑Place your fingertip flat in the center of the fingerprint sensor.❑Scan your fingerprint from the top joint of the finger to the fingertip.❑Swipe your finger perpendicularly across the fingerprint sensor.❑Keep your finger in contact with the fingerprint sensor while swiping.❑Let the fingerprint sensor take about one second to scan your fingerprint.❑It may be hard to enroll or recognize your fingerprint if your finger is:❑dry or wet

85nNCustomizing Your VAIO Computer❑wrinkled❑injured❑dirty❑The soiled fingerprint sensor may cause poor recognition performance.❑Wipe off the fingerprint sensor regularly with a soft cloth.❑Use a lens cleaning cloth when the fingerprint sensor is extremely soiled.❑Blow off dust with an air blower or a soft brush. Enrolling a FingerprintTo use the fingerprint authentication functionality, you must enroll your fingerprint(s) in your computer.✍Set the Windows password on your computer before enrollment. See Adding the Windows Password (page 81) for the detailed instructions.To enroll a fingerprint!Up to 21 fingerprints can be enrolled on a first-come, first-served basis for logging on to your system using the Boot Security functionality. If you share your computer with other people, you may not be able to use your enrolled fingerprint to log on to your system.1Click Start, point to All Programs and Protector Suite QL, and then click Welcome.The Welcome window appears.2Click Enroll now.

86nNCustomizing Your VAIO Computer✍If the Windows password is not set on your computer, password registration will be prompted.1 Click OK on the prompt window.2 Click Yes for confirmation.3 Enter your password twice and click OK.3Click Next.4Enter the Windows password and click Next.5Select the Run interactive tutorial check box and click Next.6Read the tutorial information and click Next.7Swipe your finger across the fingerprint sensor four times to perform a swipe test, and then click Next.The Enrollment window appears.

87nNCustomizing Your VAIO Computer✍See To scan a fingerprint (page 87) for the scan procedure.8Click on the finger of which fingerprint you want to enroll.9Swipe the finger across the fingerprint sensor three times.10 Click Finish.✍To enroll more fingerprints, repeat steps 7 and 8 above.If enrollment scan fails in step 8 above, click Manual mode and follow the on-screen instructions to try manual mode enrollment.To edit or add fingerprint templates, right-click the Protector Suite QL icon on the taskbar.To scan a fingerprint1Place the top joint of your finger on the fingerprint sensor (1).✍Place your fingertip flat in the center of the fingerprint sensor.2Swipe your finger perpendicularly across the fingerprint sensor.

88nNCustomizing Your VAIO Computer!Keep your finger in contact with the fingerprint sensor while swiping.Fingerprint enrollment may fail if you move your finger too fast or too slow. Take about one second to swipe your finger across the sensor. Logging Onto Your SystemTo use the fingerprint authentication functionality in place of password entry to log onto your system, you need to set the power-on, hard disk, and Windows passwords and configure your computer for fingerprint authentication.For setting the power-on, hard disk, and Windows passwords, see Setting the Password (page 75).To log onto WindowsIf your fingerprints are enrolled for your user account, you will be able to substitute fingerprint recognition for password entry when logging on to Windows.1Swipe the finger with the enrolled fingerprint across the fingerprint sensor when the Windows log-on window appears.Window is launched.✍You can log onto to your user account just by swiping the finger with the enrolled fingerprint even if your computer is shared by multiple users.

90nNCustomizing Your VAIO Computer!Up to 21 fingerprints can be enrolled on a first-come, first-served basis for logging on to your system using the Boot Security functionality. If you share your computer with other people, you may not be able to use your enrolled fingerprint to log on to your system. Using the Password BankOnce you have registered your user information (user accounts, passwords, etc.) for web sites in the password bank, you can substitute fingerprint authentication for entering required information and access the password-protected web sites.Adding an Entry to the Password BankTo access a password-protected web site using the fingerprint authentication functionality, you need to add a password bank entry for the web site.To add an entry to the password bank1Visit the desired password-protected web site to display the user account and password entry window.2Enter your user information (user account, password, etc.).3Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu.4Select Register Window.5Click Continue on the displayed window.Upon completion, a message balloon appears at the title bar.To view or edit the entry, click Registration Details on the message balloon.!Never add TPM passwords (see Using Trusted Platform Module (TPM) (page 97)) to the password bank.

91nNCustomizing Your VAIO ComputerUsing a Password Bank Entry to Access a Web SiteOnce you have added an entry to the password bank, you can use it to access the corresponding password-protected web site.To access a password-protected web site1Visit the desired password-protected web site to display the user account and password entry window.A message balloon appears to indicate that you have a password bank entry for the site.2Swipe the finger with the enrolled fingerprint across the fingerprint sensor.3Click Yes on the confirmation window.If a security warning window appears, click Yes or OK to proceed.✍You can always enter your user information that has been registered in the password bank to access password-protected web sites.Importing/Exporting Password Bank EntriesYou can export/import entries to/from the password bank for a backup or recovery purpose.To export an entry1Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu.2Select Settings.The Protector Suite QL window appears.3Click the Registrations tab.4Select the desired entry name from the list and click Export.5Enter a file name and click Save.6Enter a password twice and click OK.

92nNCustomizing Your VAIO Computer7Click OK.To import an entry1Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu.2Select Settings.The Protector Suite QL window appears.3Click the Registrations tab.4Click Import.5Select an exported file and click Open.6Enter the password that you used for export and click OK.7Click OK. Using the My Safe FolderThe encrypted My Safe folder is provided to protect your data against unauthorized access. With the fingerprint authentication functionality, you can decrypt (unlock) this folder to access your data.Note that you need to initialize and create the folder before you use the My Safe folder for the first time.To show the My Safe icon on the desktop1Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu.2Select Settings.The Protector Suite QL window appears.3Click the My Safe tab.4Click to select the Show My Safe icon on Desktop check box, and then click OK.

93nNCustomizing Your VAIO ComputerTo initialize the My Safe folder1Double-click the My Safe icon on the desktop.2Swipe the finger with the enrolled fingerprint across the fingerprint sensor.3Click Next.4Enter a backup password twice and click Next.The password should be at least 8 alphanumeric characters long.!You will need the backup password if the fingerprint sensor fails. Without the backup password, you will not be able to restore your data in the My Safe folder. Make sure to write down the backup password and keep it safe and private from other people.5Specify the folder size and click Finish.The My Safe folder opens.!The maximum size of the My Safe folder is 2 GB.To lock the My Safe folderRight-click the My Safe icon on the desktop and select Lock My Safe from the Protector Suite QL menu.The My Safe folder is locked against unauthorized access.To unlock the My Safe folder1Right-click the My Safe icon on the desktop and select Unlock My Safe from the Protector Suite QL menu.2Swipe the finger with the enrolled fingerprint across the fingerprint sensor.The My Safe folder will stay unlocked until you lock it again or restart the computer.

94nNCustomizing Your VAIO ComputerTo resize the My Safe folder✍The maximum size of the My Safe folder is 2 GB.1Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu.2Select Settings.The Protector Suite QL window appears.3Click the My Safe tab.4Click Change Size.The window for changing the folder size appears.✍If the My Safe folder is unlocked when you click Change Size in step 4, the window for locking the folder will appear. Click OK to lock the My Safe folder and close the window.5Change the folder size and click OK.6Click OK on the Protect Suite QL window. Using the Application LauncherThe application launcher feature is available on your computer for launching your preferred application (executable file) that is assigned to one of your fingers with the enrolled fingerprint. Once you have assigned an application to your finger, you can then swipe the finger across the fingerprint sensor to launch the assigned application and eliminate tiresome menu selections.Assigning an Application to Your FingerTo use the application launcher feature, you must assign an application to your individual fingers in advance.

95nNCustomizing Your VAIO ComputerTo assign an application to your finger1Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu.2Select Settings.The Protector Suite QL window appears.3Click the Applications tab.4Click Add.The Applications window appears.!To add an assignment, you need at least two enrolled fingers left unassigned.To display the Protector Suite QL menu in Step 1 above, you need at least one enrolled finger kept unassigned.5Select one of your enrolled fingers and assign an application, and then click OK.The Protector Suite QL window appears.6Click OK.Launching an Application with Your FingerSwipe your finger with your desired application assignment across the fingerprint sensor to launch the corresponding application.!Swiping the finger with no application assignment across the fingerprint sensor will display the Protector Suite QL menu.Changing an Application Assignment to Your FingerTo change an application assignment to your finger1Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu.

96nNCustomizing Your VAIO Computer2Select Settings.The Protector Suite QL window appears.3Click the Applications tab.4Select the desired finger and click Edit.The Applications window appears.5Change its assignment and click OK.The Protector Suite QL window appears.6Click OK.Removing an Application Assignment to Your FingerTo remove an application assignment to your finger1Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu.2Select Settings.The Protector Suite QL window appears.3Click the Applications tab.4Select the desired finger and click Delete.Erasing the Enrolled Fingerprints Before disposing of your computer or transferring it to a third person, it is strongly recommended you erase the fingerprints data enrolled on the fingerprint sensor after erasing the data stored on your hard disk.To erase the enrolled fingerprints 1Turn on the computer.

$98nNCustomizing Your VAIO Computer❑Make sure to make a backup copy of the data stored on the hard disk before sending your computer for repair. The hard disk may be initialized and returned after the repair work and, in such a case, you will not be able to restore the data on the hard disk using the backup copies of the emergency recovery archive file and the emergency recovery token file.❑The maintenance and management of TPM-protected data must be carried out at your own risk. Sony Corporation assumes no liabilities for any defects arising out of your data maintenance and management. Important Notice❑Do not encrypt the Documents and Settings folder.Encrypting the files in the folders containing basic user keys and others, which are listed later in this section, using the Encrypting File System (EFS) will disable you to launch your TPM software successfully and decrypt the encrypted data if:❑The TPM software has been installed.❑The platform has been initialized.❑The EFS functionality has been enabled in user initialization process.With the default settings, the files in the folders below are prevented from encrypting by having system attributes. Do not change the system attributes of the files in the folders below.❑Folders containing basic user keys and othersC:\Documents and Settings\All Users\Application Data\Infineon\TPM Software 2.0\BackupDataC:\Documents and Settings\All Users\Application Data\Infineon\TPM Software 2.0\PlatformKeyDataC:\Documents and Settings\All Users\Application Data\Infineon\TPM Software 2.0\RestoreDataC:\Documents and Settings\<account>\Application Data\Infineon\TPM Software 2.0\UserKeyData(All folders are invisible by default.)In addition, encrypting the following folder will disable you to log onto your system.C:\Documents and Settings\<account>\Local Settings (invisible by default)❑Encrypting the archive, backup, and token files will disable emergency restoration.Encrypting the password reset token and secret files will disable password reset.$

$99nNCustomizing Your VAIO Computer❑Do not encrypt the following folders and files. There will be no way to restore the following folders and files or the archive, backup, token, password reset token and secret files of your TPM software if you carelessly encrypt them.Sony Corporation assumes no liability for any troubles and damages arising out of your careless encryption of such folders and files.❑Automatic backup fileDefault file name: SPSystemBackup.xmlDefault path: None (Clicking Browse displays the My Documents\Security Platform window.)❑Storage folder for automatic backup dataDefault file name: SPSystemBackupThe folder is created as the subfolder for the SPSystemBackup.xml file.❑Token file for decryptionDefault file name: SPEmRecToken.xmlDefault path: Removable media (FD, USB memory, etc.)❑Password reset token fileDefault file name: SPPwdResetToken.xmlDefault path: Removable media (FD, USB memory, etc.)❑Password reset secret fileDefault file name: SPPwdResetSecret.xmlDefault path: Removable media (FD, USB memory, etc.)❑Key and certificate backup fileDefault file name: SpBackupArchive.xmlDefault path: None (Clicking Browse displays the My Documents\Security Platform window.)❑PSD backup fileDefault file name: SpPSDBackup.fsbDefault path: None (Clicking Browse displays the My Documents\Security Platform window.)$

$101nNCustomizing Your VAIO ComputerInstalling the Infineon TPM Professional PackageRead the Readme.txt in the C:\infineon\Readme folder. Then, double-click C:\Infineon\setup.exe to install the package.To install this package, you must have administrator rights on the computer.Initializing and configuring the TPMSee the online documentation for detailed information. To open the documentation, click Start, point to All Programs and Infineon Security Platform Solution, and click Help on Security Platform.!The maintenance and management of TPM-protected data must be carried out at your own risk. Sony Corporation assumes no liabilities for any defects arising out of your data maintenance and management. Setting Up Your Computer with VAIO CentralThe VAIO Central utility allows you to consult system information and specify preferences for system behavior.To use VAIO Central1Click Start, point to All Programs, and click VAIO Central.The VAIO Central window appears.2Select the desired control item and change the settings.3Once finished, click OK.The setting of the desired item has been changed.✍Some of the control items will not be visible if you open VAIO Central as a limited user.$

Sony Group PCG4J3L laptop with wireless radios User Manual 3750 US UG

Sony Corporation laptop with wireless radios 3750 US UG

Contents

Users Guide Full

Navigation menu

Namespaces

Views

Navigation