Sony Group PCG571Z Notebook Computer with WLAN and Bluetooth User Manual 328879
Sony Corporation Notebook Computer with WLAN and Bluetooth 328879
Contents
- 1. Instruction Manual
- 2. Users manual
- 3. OEM installation manual Calexico 1
- 4. OEM Installation Manual CX1
- 5. OEM installation manual Calexico 2
- 6. OEM Installtion Manual Modular Manual Recommendations laptop
OEM Installtion Manual Modular Manual Recommendations laptop
1) The manual should provide further information and better detail as to how the OEM must use the module in order to maintain RF exposure compliance and that it's approval is limited only to devices that can maintain the 20 cm distance between the antenna and body. In order to make sure that the integrators are given enough information, please add the following information or similar to the users manual: This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users. For laptop installations, the antenna must be installed to ensure that the proper spacing is maintained in the event the users places the device in their lap during use (i.e. positioning of antennas must be placed in the upper portion of the LCD panel only to ensure 20 cm will be maintained if the user places the device in their lap for use) and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as the 2 conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in devices where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example access points, routers, wireless ASDL modems, certain laptop configurations, and similar equipment). The final end product must be labeled in a visible area with the following: "Contains TX FCC ID: {INSERT FCC ID HERE}". RF Exposure Manual Information That Must be Included The users manual for end users must include the following information in a prominent location "IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter." Additional Information That Must be Provided to OEM Integrators The end user should NOT be provided any instructions on how to remove or install the device.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2003:05:29 07:25:46-07:00 Modify Date : 2003:05:29 07:25:46-07:00 Page Count : 1 Creation Date : 2003:05:29 14:25:46Z Mod Date : 2003:05:29 14:25:46Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : fcc Metadata Date : 2003:05:29 14:25:46Z Creator : fcc Title : Microsoft Word - 328879.DOCEXIF Metadata provided by EXIF.tools