Sony Group PCGABA1 USB Bluetooth Dongle User Manual Manual 3

Sony Corporation USB Bluetooth Dongle Manual 3

Contents

Manual 3

Sony Corporation © 2003 Printed in Japan 4-677-222-01 (1)PCGA-BA1 SeriesRegulatory informationEnglishFor customers in the U.S.A.Owner’s RecordThe model number is located on the bottomof the adapter. Refer to this numberwhenever you call your Sony dealerregarding this product.Model No. PCGA-BA1/AThis equipment has been tested and found tocomply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCCRules. These limits are designed to providereasonable protection against harmfulinterference in a residential installation. Thisequipment generates, uses, and can radiateradio frequency energy and, if not installedand used in accordance with the instructions,may cause harmful interference to radiocommunications. However, there is noguarantee that interference will not occur ina particular installation. If this equipmentdoes cause harmful interference to radio ortelevision reception, which can bedetermined by turning the equipment off andon, the user is encouraged to try to correctthe interference by one or more of thefollowing measures:–Reorient or relocate the receiving antenna.–Increase the separation between theequipment and receiver.–Connect the equipment into an outlet on acircuit different from that to which thereceiver is connected.–Consult the dealer or an experiencedradio/TV technician for help.The shielded interface cable recommendedin this manual must be used with thisequipment in order to comply with the limitsfor a digital device pursuant to subpart B ofPart 15 of the FCC Rules.You are cautioned that any changes ormodifications not expressly approved in thismanual could void your authority to operatethis equipment.For questions regarding your product or forthe Sony Service Center nearest you, call 1-888-476-6972 in the United States or 1-800-961-7669 in Canada.The number below is for FCC relatedmatters only.Declaration of ConformityTrade Name: SonyModel No.: PCGA-BA1Responsible Party:Sony Electronics Inc.Address: 680 Kinderkamack Road Oradell,NJ 07649 USATelephone No.: 201-930-6972The device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) this device must accept any interferencereceived, including interference that may causeundesired operation.Radio-Frequency Exposure StatementThis equipment generates and radiates radio-frequency energy. In order to comply withFCC radio-frequency radiation exposureguidelines for an uncontrolled environment,this equipment has to be installed andoperated while maintaining a minimum bodyto antenna distance of 2.5 cm. Based oncontinuous exposure of 30 minutes.Users are not permitted to make changes ormodify the system in any way.

Navigation menu