Sony Group RSXGS9 Digital Media Player User Manual RSX GS9

Sony Corporation Digital Media Player RSX GS9

(Short-Term Confidential) User Manual

RSX-GS9E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\010COV.fm masterpage: CoverRSX-GS94-577-101-11(1)4-577-101-11(1)Digital Media PlayerOwner’s RecordThe model and serial numbers are located on the bottom of the unit.Record the serial number in the space provided below.Refer to these numbers whenever you call upon your Sony dealer regarding this product.Model No. RSX-GS9Serial No. Operating Instructions GBMode d’emploi FRFor the connection/installation, see page 33.Pour le raccordement/l’installation, reportez-vous à la page 00.010COV.book Page 1 Thursday, July 2, 2015 2:07 PM
2GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\020INT.fm masterpage: LeftRSX-GS94-577-101-11(1)The nameplate indicating operating voltage, etc., is located on the bottom of the chassis.WarningThis device complies with Part 15 of the FCC Rules and Industry Canada’s licence-exempt RSSs.Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation of the device.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.For the State of California, USA onlyPerchlorate Material – special handling may apply, Seewww.dtsc.ca.gov/hazardouswaste/perchlorateNote on the lithium batteryDo not expose the battery to excessive heat such as direct sunlight, fire or the like.Disclaimer regarding services offered by third partiesServices offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.For safety, be sure to install this unit in the dashboard of the car as the top of the unit becomes hot during use.For details, see “Connection/Installation” (page 33).FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:ˋReorient or relocate the receiving antenna.ˋIncrease the separation between the equipment and receiver.ˋConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.ˋConsult the dealer or an experienced radio/TV technician for help.You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.010COV.book Page 2 Thursday, July 2, 2015 2:07 PM
3GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\020INT.fm masterpage: RightRSX-GS94-577-101-11(1)CautionIN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.Dear customer, this product includes a radio transmitter.Please check your vehicle operation manual or contact the manufacturer of your vehicle or your vehicle dealer, before you install this product into your vehicle.Emergency callsThis BLUETOOTH car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions.Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies).On BLUETOOTH communicationˎMicrowaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident.ˋwhere inflammable gas is present, in a hospital, train, airplane, or petrol stationˋnear automatic doors or a fire alarmˎThis unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using BLUETOOTH wireless technology.ˎWe do not take any responsibility for the leakage of information during BLUETOOTH communication.If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.Important notice010COV.book Page 3 Thursday, July 2, 2015 2:07 PM
4GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\030TOC.fm masterpage: LeftRSX-GS94-577-101-11(1)Table of ContentsWarning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . 5Guide to Audio Device Connection . . . . . . . . . . . . . 7Getting StartedResetting the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Preparing a BLUETOOTH Device. . . . . . . . . . . . . . . . 9Connecting a USB Device . . . . . . . . . . . . . . . . . . . . 11Connecting a High-Resolution USB Audio Supported Device . . . . . . . . . . . . . . . . . . . . . . . 11Connecting Other Portable Audio Device . . . . . . . 11Listening to the RadioListening to the Radio. . . . . . . . . . . . . . . . . . . . . . . 12PlaybackPlaying a USB Device . . . . . . . . . . . . . . . . . . . . . . . 12Playing a High-Resolution USB Audio Supported Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Playing a BLUETOOTH Device. . . . . . . . . . . . . . . . . 13Searching and Playing Tracks. . . . . . . . . . . . . . . . . 13Handsfree Calling (via BLUETOOTH only)Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Available Operations during Call . . . . . . . . . . . . . . 14Useful FunctionsSongPal with iPhone/Android Phone . . . . . . . . . . 15SettingsBasic Setting Operation . . . . . . . . . . . . . . . . . . . . . 16General Setup (General) . . . . . . . . . . . . . . . . . . . . . 16Sound Setup (Sound) . . . . . . . . . . . . . . . . . . . . . . . 17BLUETOOTH Setup (BT Setting) . . . . . . . . . . . . . . . 18Additional InformationUpdating the Firmware. . . . . . . . . . . . . . . . . . . . . . 20Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Important information on software. . . . . . . . . . . . 27Connection/InstallationCautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Parts List for Installation . . . . . . . . . . . . . . . . . . . . 33Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37010COV.book Page 4 Thursday, July 2, 2015 2:07 PM
5GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)Guide to Parts and ControlsȩReceptor for the remote commanderȪDisplay windowȫVolume dialRotate to adjust the volume.N-MarkTouch with an NFC compatible smartphone to make a BLUETOOTH connection.ȬSRC (source)Turn on the power.Change the source.OFFPress and hold for 1 second to turn the source off and display the clock.Press and hold for more than 2 seconds to turn off the power and the display.If the unit is turned off and the display disappears, operation by the remote commander is not available.ȭÃ/Ñ (prev/next)Skip tracks; tune in the preset station.è/Ă (album –/+)Press and hold for 1 second to skip albums; tune in radio station manually.Ȯā (play/pause)Start/pause playback; change the band during radio reception.While playback is paused, the illumination of the unit flashes.PAIRINGTurn the BLUETOOTH signal on.ȯBLUETOOTH indicatorȰReset button (page 9)ȱAUX input jackȲUSB micro-B port (for USB-DAC)ȳUSB type-A port (for USB1)Use to charge the connected device (USB Hi-charge (1.5 A))Main unitˎIn this manual, procedures are explained mainly for the remote commander unless otherwise specified.ˎAvailable buttons light up depending on the selected source.010COV.book Page 5 Thursday, July 2, 2015 2:07 PM
6GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)The VOL (volume) + button has a tactile dot.ȴ (back)Return to the previous display.ȵREP (repeat)ȶSHUF (shuffle)ȷATT (attenuate)Attenuate the sound. Press again to cancel the attenuation.ȸMODE (page 12, 12)ȹSOUND*Open the SOUND menu directly.MENU*Press and hold to open the setup menu.* Not available when the BT phone is selected.ȺDSPL (display)Change display items.ȻR/a/{/CSelect a setup item, etc.ENTEREnter the selected item.Ã/Ñ (prev/next)Skip tracks; tune in radio station automatically.Press and hold to tune in radio station manually.+/– (album +/–)Skip albums*; tune in the preset station.* Available during USB playback only.ȼNumber buttons (1 to 6)Receive stored radio stations. Press and hold to store stations.PAUSERemove the insulation film before use.RM-X261 Remote commander010COV.book Page 6 Thursday, July 2, 2015 2:07 PM
7GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)Guide to Audio Device Connection*1 Audio device with a stereo mini jack. When connecting, a stereo mini plug (straight type) (not supplied) is required.*2 When connecting a smartphone, an appropriate USB cable (not supplied) is required.*3 When connecting an iPod/iPhone, a USB connection cable for iPod/iPhone (not supplied) is required.*4 Use an appropriate USB cable (USB-A plug to USB micro B plug) (not supplied).*5 For Windows, installing the dedicated driver to your computer is required. For Mac OS, no driver is required.To play High-Resolution Audio files, using the audio playback software “Hi-Res Audio Player” for Windows/Mac OS is recommended. For details, visit the support site on the back cover. *6 When connecting an Android smartphone, a USB OTG cable (not supplied) is required. Depending on the smartphone, downloading the dedicated app for playing High-Resolution Audio files is required.Computer specificationsCompliant OS:ˋWindows 8ˋWindows 7ˋWindows VistaˋMac OS X (v10.6.8 or later)CPU: Intel Core 2 Processor 1.6 GHz or fasterMemory: 1 GB or largerUSB port: USB 2.0 High SpeedA compliant OS is required to be pre-installed to the computer, and the following are not guaranteed:ˋa computer operating outside its normal operating environment.ˋa home built computer, a computer with an operating systems not upgraded by the computer’s manufacturer, or a computer with multiple operating systems.ˋmodes such as standby, sleep, or hibernation.Design and specifications are subject to change without notice.Audio device*1 (e.g., WALKMAN®, digital media player, smartphone)Smartphone*2, iPod/iPhone*3, WALKMAN®, USB storage deviceSmartphone*6 (e.g., Android smartphone)Computer*5 (e.g., with Windows, with Mac OS)*4*2*3*1*4*6010COV.book Page 7 Thursday, July 2, 2015 2:07 PM
8GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)Playable file formats, frequencies and bit rates or bit depths differ depending on whether the USB type-A port or the USB micro-B port is used.Playable High-Resolution Audio file formatsUSB-DAC, USB micro-B port USB1 (front), USB type-A port USB2 (rear), USB type-A portDSD (DSF)ASIO Native: 2.8 MHz/1 bit, 5.6 MHz/1 bitDoP: 2.8 MHz/1 bit2.8MHz (LPCM convert) 2.8MHz (LPCM convert)DSD (DFF)ASIO Native: 2.8 MHz/1 bit, 5.6 MHz/1 bitDoP: 2.8 MHz/1 bit2.8MHz (LPCM convert) 2.8MHz (LPCM convert)LPCM Max. 192 kHz/24 bit – –WAV (LPCM) – 16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)AIFF (LPCM) – 32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)FLAC – 16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)ALAC – 16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)010COV.book Page 8 Thursday, July 2, 2015 2:07 PM
9GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)Resetting the UnitBefore operating the unit for the first time, after replacing the car battery, or changing the connections, you must reset the unit.NotesˎPressing the reset button will erase the clock setting and some stored contents.ˎNo sound will be output for about 1 minute until the reset of the unit is complete.Setting the ClockUse the remote commander to perform the following.1Press and hold MENU, press a or { to select [General], then press ENTER.2Press a or { to select [Clock Adjust], then press ENTER.The hour indication flashes.3Press a or { to set the hour and minute.To move the digital indication, press R or C.4After setting the minute, press and hold MENU.The setup is complete and the clock starts.To display the clockPress DSPL.Preparing a BLUETOOTH DeviceYou can enjoy music, or perform handsfree calling depending on the BLUETOOTH compatible device such as a smartphone, cellular phone and audio device (hereafter “BLUETOOTH device” if not otherwise specified). For details on connecting, refer to the operating instructions supplied with the device.There are two ways for connecting the BLUETOOTH device:ˋOne-touch connection for the NFC compatible BLUETOOTH device.ˋManual connection.Before connecting the device, turn down the volume of this unit; otherwise, loud sound may result.By touching the N-Mark on the unit with an NFC* compatible smartphone, the unit is paired and connected with the smartphone automatically.* NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices.For a smartphone with Android OS 4.0 or lower installed, downloading the app “NFC Easy Connect” available at Google Play™ is required. The app may not be downloadable in some countries/regions.1Press and hold ā on the unit for more than 2 seconds.Alternatively, press and hold MENU on the remote commander, select [BT setting] q [BT Signal], then press ENTER.The BLUETOOTH indicator on the unit flashes (while the unit is in pairing standby mode).2Activate the NFC function on the smartphone.For details, refer to the operating instructions supplied with the smartphone.3Touch the N-Mark part of the unit with the N-Mark part of the smartphone.Make sure the BLUETOOTH indicator on the unit lights up.To disconnect by One touchTouch the N-Mark part of the unit with the N-Mark part of the smartphone again.NotesˎWhen making the connection, handle the smartphone carefully to prevent scratches.ˎOne touch connection is not possible when the unit is already connected to another NFC compatible device. In this case, disconnect the other device, and make connection with the smartphone again.Getting StartedConnecting with a Smartphone by One touch (NFC)010COV.book Page 9 Thursday, July 2, 2015 2:07 PM
10GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)When connecting a BLUETOOTH device for the first time, mutual registration (called “pairing”) is required. Pairing enables this unit and other devices to recognize each other.1Place the BLUETOOTH device within 1 m (3 ft) of this unit.2Press and hold ā on the unit for more than 2 seconds.Alternatively, press and hold MENU on the remote commander, select [BT setting] q [BT Signal], then press ENTER.The BLUETOOTH indicator on the unit flashes (while the unit is in pairing standby mode).3Perform pairing on the BLUETOOTH device so it detects this unit.4Select [RSX-GS9] shown in the display of the BLUETOOTH device.If your model name does not appear, repeat from step 2.5If passkey* input is required on the BLUETOOTH device, input [0000].* Passkey may be called “Passcode,” “PIN code,” “PIN number” or “Password,” etc., depending on the device.When paired, the BLUETOOTH indicator on the unit stays lit.6Select this unit on the BLUETOOTH device to establish the BLUETOOTH connection.NoteWhile connecting to a BLUETOOTH device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device.To start playbackFor details, see “Playing a BLUETOOTH Device” (page 13).To cancel pairingPerform step 2 to cancel the pairing mode after this unit and the BLUETOOTH device are paired.To use a paired device, connection with this unit is required. Some paired devices will connect automatically.1Press and hold ā on the unit for more than 2 seconds.Alternatively, press and hold MENU on the remote commander, select [BT setting] q [BT Signal], then press ENTER.Make sure the BLUETOOTH indicator on the unit lights up.2Activate the BLUETOOTH function on the BLUETOOTH device.3Operate the BLUETOOTH device to connect to this unit.To connect the last-connected device from this unitActivate the BLUETOOTH function on the BLUETOOTH device.Press SOURCE (SRC), then select [BT Phone] or [BT Audio].Press ENTER to connect with the cellular phone, or PAUSE to connect with the audio device.NoteWhile streaming BLUETOOTH audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead.TipWith BLUETOOTH signal on: when the ignition is turned to on, this unit reconnects automatically to the last-connected cellular phone.To install the microphoneFor details, see “Installing the microphone” (page 36).Pairing and connecting with a BLUETOOTH device[0000]Input passkeyConnecting with a paired BLUETOOTH device010COV.book Page 10 Thursday, July 2, 2015 2:07 PM
11GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)Connecting a USB Device1Turn down the volume on the unit.2Connect the USB device to the USB type-A port.To connect an iPod/iPhone, use the USB connection cable for iPod/iPhone (not supplied).Connecting a High-Resolution USB Audio Supported Device1Turn down the volume on the unit.2Connect a High-Resolution USB Audio supported computer or smartphone to the USB micro-B port.For details, see “Guide to Audio Device Connection” (page 7).Connecting Other Portable Audio Device1Turn off the portable audio device.2Turn down the volume on the unit.3Connect the portable audio device to the AUX input jack (stereo mini jack) on the unit with a connecting cord (not supplied)*.* Be sure to use a straight type plug.4Press SRC to select [AUX1].To match the volume level of the connected device to other sourcesStart playback of the portable audio device at a moderate volume, and set your usual listening volume on the unit.Press and hold MENU, then select [Sound] q [AUX Level] (page 18).010COV.book Page 11 Thursday, July 2, 2015 2:07 PM
12GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)Listening to the RadioTo listen to the radio, press SOURCE (SRC) to select [Tuner].Use the remote commander to perform the following.1Press MODE to change the band (FM1, FM2, FM3, AM1 or AM2).Alternatively, press ā on the unit to change the band.2Press and hold MENU, press a or { to select [General], then press ENTER.3Press a or { to select [BTM], then press ENTER.The unit stores stations in order of frequency on the number buttons.1Press MODE to change the band (FM1, FM2, FM3, AM1 or AM2).Alternatively, press ā on the unit to change the band.2Perform tuning.To tune manuallyPress and hold R or C to locate the approximate frequency, then press R or C repeatedly to fine adjust to the desired frequency.To tune automaticallyPress R or C (Alternatively, press and hold à or Ñ on the unit for more than 1 second.)Scanning stops when the unit receives a station.1While receiving the station that you want to store, press and hold a number button (1 to 6) until [MEM] appears.1Select the band, then press a number button (1 to 6).Alternatively, press à or Ñ on the unit.Playing a USB DeviceIn these Operating Instructions, “iPod” is used as a general reference for the iPod functions on an iPod and iPhone, unless otherwise specified by the text or illustrations.For details on the compatibility of your iPod, see “About iPod” (page 20) or visit the support site on the back cover.MSC (Mass Storage Class)-type USB devices (such as a USB flash drive, digital media player, Android phone) compliant with the USB standard can be used.Depending on the digital media player or Android phone, setting the USB connection mode to MSC is required.NotesˎFor details on the compatibility of your USB device, visit the support site on the back cover.ˎDuring USB playback via the USB type-A port, a DSD file on the connected device is converted into PCM format.ˎPlayback of the following files is not supported.MP3/WMA/AAC/FLAC:ˋcopyright-protected filesˋDRM (Digital Rights Management) filesˋMulti-channel audio filesMP3/WMA/AAC:ˋlossless compression filesWAV:ˋMulti-channel audio files1Connect a USB device to the USB type-A port (page 11).Playback starts. (Depending on the file organization, playback may take time to start.)If a device is already connected, to start playback, press SOURCE (SRC) to select [USB1] or [USB2] ([iPod1] or [iPod2] appears in the display when the iPod is recognized).2Adjust the volume on this unit.To pause playbackPress ā.To remove the deviceStop playback, then remove the device.To display the sampling frequency and bit ratePress DSPL during playback.While DSD playback is performed via USB1 or USB2, the sampling frequency and bit rate before converting into the PCM format are displayed.Listening to the RadioStoring automatically (BTM)TuningStoring manuallyReceiving the stored stationsPlayback010COV.book Page 12 Thursday, July 2, 2015 2:07 PM
13GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)Caution for iPhoneWhen you connect an iPhone via USB, phone call volume is controlled by the iPhone, not the unit. Do not inadvertently increase the volume on the unit during a call, as a sudden loud sound may result when the call ends.Playing a High-Resolution USB Audio Supported DeviceFor details on the compatibility of your High-Resolution USB Audio device and the DSD supported audio playback software or app, see the support site on the back cover.For your safetyˎDo not operate the High-Resolution USB Audio supported device while driving.ˎBefore driving your car, make sure the High-Resolution USB Audio supported device will not play loudly during playback (especially during DSD playback).1Connect a High-Resolution USB Audio supported device to the USB micro-B port (page 11).Playback starts.If a device is already connected, to start playback, press SOURCE (SRC) to select [USB-DAC].2Adjust the volume on this unit.To stop playbackOperate the device to stop playback. The controls on the unit or the remote commander do not work.To remove the deviceStop playback, then remove the device.To display the sampling frequency and bit ratePress DSPL during playback.NoteFor a DSD file on the device connected via the USB micro-B port, native DSD playback is performed. During playback, make sure that the DSD playback on the High-Resolution USB Audio supported device is properly performed.Playback of the following mode or method is supported.ˋPCM: Max. 192 kHz/24 bitˋDSD (DSF/DSDIFF): ASIO Native: 2.8 MHz/1 bit, 5.6 MHz/1 bitDoP: 2.8 MHz/1 bitPlaying a BLUETOOTH DeviceYou can play contents on a connected device that supports BLUETOOTH A2DP (Advanced Audio Distribution Profile). Using an LDAC-supported device is recommended.1Make BLUETOOTH connection with the audio device (page 9).2Press SRC to select [BT Audio].Alternatively, press SOURCE on the remote commander.3Operate the audio device to start playback.4Adjust the volume on this unit.NotesˎDepending on the audio device, information such as track number/time and playback status may not be displayed on this unit.ˎEven if the source is changed on this unit, playback of the audio device does not stop.ˎ[BT Audio] does not appear in the display while running the “SongPal” application via the BLUETOOTH function.To match the volume level of the BLUETOOTH device to other sourcesStart playback of the BLUETOOTH audio device at a moderate volume, and set your usual listening volume on the unit.Press and hold MENU, then select [BT Setting] q [BTA Level] (page 18).To apply the SBC codec onlyPress and hold MENU on the remote, then set [Audio Codec] in [BT Setting] to [SBC] (page 18).Searching and Playing TracksUse the remote commander to perform the following.1During USB1 or USB2 playback, press REP or SHUF repeatedly to select the desired play mode.Playback in the selected play mode may take time to start.Repeat play and shuffle play010COV.book Page 13 Thursday, July 2, 2015 2:07 PM
14GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)To use a cellular phone, connect it with this unit. For details, see “Preparing a BLUETOOTH Device” (page 9). Only during a call, [BT Phone] becomes available when selecting the source.Use the controls on the unit to perform the following.Receiving a Call1Press any button when a call is received with a ringtone.The phone call starts.NoteThe ringtone and talker’s voice are output only from the front speakers.To reject the callPress and hold any button for 2 seconds.To end the callPress SRC.Making a CallYou can make a call via “SongPal” only. For details, see “SongPal with iPhone/Android Phone” (page 15).Available Operations during CallTo adjust the ringtone volumeRotate the volume dial while receiving a call.To adjust the talker’s voice volumeRotate the volume dial during a call.To adjust the volume for the other party (Mic gain adjustment)Press à during a call.Adjustable volume levels: [MIC High], [MIC Low], [MIC Middle].To reduce echo and noise (Echo Canceler/Noise Canceler Mode)Press Ñ during a call.Settable mode: [ECNC 1], [ECNC 2].To switch between hands-free mode and handheld modeDuring a call, press ā to switch the phone call audio between the unit and cellular phone.NoteDepending on the cellular phone, this operation may not be available.Handsfree Calling (via BLUETOOTH only)010COV.book Page 14 Thursday, July 2, 2015 2:07 PM
15GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)SongPal with iPhone/Android PhoneDownloading the “SongPal” application (version 3.0 or later) is required from the App Store for iPhone or from Google Play for Android phone.NotesˎFor your safety, follow your local traffic laws and regulations, and do not operate the application while driving.ˎ“SongPal” is an app for controlling Sony audio devices which are compatible with “SongPal”, by your iPhone/Android phone.ˎWhat you can control with “SongPal” varies depending on the connected device.ˎTo make use of “SongPal” features, see the details on your iPhone/Android phone.ˎFor further details on “SongPal,” visit the following URL: http://rd1.sony.net/help/speaker/songpal/1Make the BLUETOOTH connection with iPhone/Android phone (page 9).2Launch the “SongPal” application.Connection to iPhone/Android phone starts.For details on the operations on iPhone/Android phone, see the help of the application.If the device number appearsMake sure that the number is displayed (e.g., 123456), then select [Yes] on the iPhone/Android phone.To terminate connectionPress and hold ENTER.Selecting the source or applicationYou can operate to select the desired source or application on iPhone/Android phone.To select the sourcePress SOURCE repeatedly.NoteWhile “Device Setting” is selected, the controls on the unit and remote commander do not work. Operate your iPhone/Android phone.To display the source listPress SOURCE.Announcement of various information by voice guide (Android phone only)When SMS, Twitter/Facebook/Calendar notifications, etc., are received, they are automatically announced through the car speakers.For details on settings, refer to the help of the application.Replying a message of SMS (Android phone only)You can reply a message by voice recognition.1Activate voice recognition, then input “Reply (Replay).”The message input display appears on the “SongPal” application.2Input a reply message by voice recognition.The list of message candidates appears on the “SongPal” application.3Rotate the volume dial to select the desired message, then press it.The message is sent out.Useful FunctionsEstablishing the SongPal connection010COV.book Page 15 Thursday, July 2, 2015 2:07 PM
16GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)Making sound and display settingsYou can adjust the settings relating to sound and display via iPhone/Android smartphone.For details on settings, refer to the help of the application.Basic Setting OperationYou can set items in the following setup categories:General setup (General), Sound setup (Sound), BLUETOOTH setup (BT Setting)Setting by “SongPal” is also available (page 15).(Not available when the BT phone is selected.)Use the remote commander to perform the following.1Press and hold MENU, press a or { to select the setup category, then press ENTER.The items that can be set differ depending on the source and settings.2Press a or { to select the options, then press ENTER.To return to the previous displayPress .General Setup (General)Clock Adjust (page 9)DimmerDims the display: [ON], [OFF], [Auto]. ([Auto] is available only when the illumination control lead is connected, and turn on the head light).Optical OutSelects the optical output setting: [OFF], [48kHz], [96kHz].(The volume control on the unit does not work when set to [48kHz] or [96kHz], press ATT on the remote commander).BTM (best tuning memory) (page 12)(Available only when the tuner is selected.)Settings010COV.book Page 16 Thursday, July 2, 2015 2:07 PM
17GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)FirmwareChecks/updates the firmware version. For details, visit the following support site:http://esupport.sony.com/VersionDisplays current firmware version.UpdateEnters firmware update process: [NO], [YES].Updating the firmware takes a few minutes to complete. During the update, do not turn the ignition to the OFF position.(Available only while the source is off and the clock is displayed.)Sound Setup (Sound)This setup menu can also be opened by pressing SOUND. If [Optical Out] is set to [48kHz] or [96kHz], this setup menu is not available.Subwoofer(Automatically set to [OFF] when [Optical Out] is set to [48kHz] or [96kHz].) (Not available while USB-DAC is selected and DSD playback is performed.)Sub Level (subwoofer level)Adjusts the subwoofer volume level: [+10dB] – [0dB] – [-10dB].Sub Phase (subwoofer phase)Selects the subwoofer phase: [Normal], [Reverse].LPF Freq (low pass filter frequency)Selects the subwoofer cut-off frequency: [OFF], [50Hz], [63Hz], [79Hz], [99Hz], [125Hz], [158Hz], [198Hz], [250Hz].LPF Slope (low pass filter slope)Selects the LPF slope: [SLP1] (-12dB/oct), [SLP2] (-24dB/oct), [SLP3] (-36dB/oct), [SLP4] (-48dB/oct).LPF Mode (low pass filter mode)Sets the filter mode: [Mono], [Stereo].HPF Freq (high pass filter frequency)Selects the front/rear speaker cut-off frequency: [OFF], [50Hz], [63Hz], [79Hz], [99Hz], [125Hz], [158Hz], [198Hz], [250Hz].HPF Slope (high pass filter slope)Selects the HPF slope (effective only when [HPF Freq] is set to other than [OFF]): [SLP1] (-12dB/oct), [SLP2] (-24dB/oct), [SLP3] (-36dB/oct), [SLP4] (-48dB/oct).Sub DSD (subwoofer DSO)(Available only while USB-DAC is selected and DSD playback is performed.)LPF Freq (low pass filter frequency)Selects the subwoofer cut-off frequency: [OFF], [150Hz].LPF Mode (low pass filter mode)Sets the filter mode: [Mono], [Stereo].Pos Custom (position custom)Sets [Custom] of [Pos Preset].(Available when any source except for BT phone is selected.) (Automatically set to [OFF] when [Optical Out] is set to [48kHz] or [96kHz].)Front Left, Front Right, Rear Left, Rear Right, SubwooferSets the distance from your desired position to the speaker.Adjustable range: [0] – [350] cmPos Preset (position preset)F/R Pos (front/rear position)Simulates a natural sound field by delaying the sound output from speakers to suit your position:ɞ [Front Left], ɟ [Front Right], ɠ [Center Front], ɡ [ALL] (center of your car), [Custom] (position set in [Pos Custom]),[OFF] (no position set)Adjust Pos* (adjust position)Fine-tunes the listening position setting: [+3] – [0] – [-3].Subwoofer* (subwoofer position)ʭ [Near], ʮ [Normal], ʯ [Far]EQ10 PresetSelects an equalizer curve from 10 equalizer curves or off: [OFF], [R & B], [Rock], [Pop], [Dance], [Hip-Hop], [Electronica], [Jazz], [Soul], [Country], [Regueton], [Salsa], [Afro Pop], [Bongo], [Bollywood], [Custom] (equalizer curve set by “SongPal”).The equalizer curve setting can be memorized for each source.(Available when any source except for USB-DAC or BT phone is selected.) (Automatically set to [OFF] when [Optical Out] is set to [48kHz] or [96kHz].)(Not available while USB-DAC is selected and DSD playback is performed.)BalanceAdjusts the sound balance: [R-15] – [Center] – [L-15].(Available when any source except for BT phone is selected.) (Automatically set to [OFF] when [Optical Out] is set to [48kHz] or [96kHz].)010COV.book Page 17 Thursday, July 2, 2015 2:07 PM
18GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)FaderAdjusts the relative level: [F-15] – [Center] – [R-15].(Available when any source except for BT phone is selected.) (Automatically set to [OFF] when [Optical Out] is set to [48kHz] or [96kHz].)LoudnessReinforces bass and treble for clear sound at low volume levels: [OFF], [ON].(Not available while USB-DAC is selected and native DSD playback is performed.)DSEE-HX (digital sound enhancement engine HX)Improves digitally compressed sound by restoring high frequencies lost in the compression process.This setting can be memorized for each source other than the tuner or AUX.Selects the DSEE HX mode: [OFF], [ON].(Available only when USB1, USB2, USB-DAC or BT Audio is selected.) (Automatically set to [OFF] when [Optical Out] is set except for [OFF].) (Not available while USB-DAC is selected and DSD playback is performed.)AUX LevelAdjusts the volume level for each connected auxiliary device: [+18dB] – [0dB] – [-8dB].This setting negates the need to adjust the volume level between sources.* Does not appear when [F/R Pos] is set to [OFF].BLUETOOTH Setup (BT Setting)BT Signal (BLUETOOTH signal) (page 10, 10)Activates/deactivates the BLUETOOTH function.BT Pairing (BLUETOOTH pairing) (page 00)BTA Level (BLUETOOTH audio level)Adjusts the volume level for each connected BLUETOOTH device: [+6dB] – [0dB] – [-6dB]. This setting negates the need to adjust the volume level between sources.Audio CodecSelects the BLUETOOTH audio codec type: [AUTO] (LDAC, AAC, SBC), [SBC].(Not available via “SongPal”.)Auto AnswerSets this unit to answer an incoming call automatically: [OFF], [3sec], [10sec].Ring ToneSelects whether this unit or the connected cellular phone outputs the ringtone: [TONE 1] (this unit), [TONE 2] (cellular phone).BT InitializeInitializes all the BLUETOOTH related settings (pairing information, preset number, device information, etc.): [NO], [YES].When disposing the unit, initialize all the settings.010COV.book Page 18 Thursday, July 2, 2015 2:07 PM
19GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)Optical output setting and available sound settingsAvailable sound settings differ depending on the optical output setting and the selected source.Optical Out Tuner USB1 (front), USB2 (rear)USB-DAC (PCM)USB-DAC (DSD)AUX1 (front)AUX2 (High level input) BT Audio BT PhoneDSEE-HXOFF ×íMax. 48 kHzíMax. 48 kHz×× ×íMax. 48 kHz×48kHz, 96kHz ×× ×××× ××EQ10 PresetOFF íí í×íí í×48kHz, 96kHz ×× ×××× ××LoudnessOFF íí í×íí í×48kHz, 96kHz ×× ×××× ××SubwooferOFF íí í×íí í×48kHz, 96kHz ×× ×××× ××Sub DSDOFF íí íí(OFF, 150 Hz)íí í×48kHz, 96kHz ×× ×××× ××Pos CustomOFF íí íííí í×48kHz, 96kHz ×× ×××× ××FaderOFF íí íííí í×48kHz, 96kHz ×× ×××× ××BalanceOFF íí íííí í×48kHz, 96kHz ×× ×××× ××010COV.book Page 19 Thursday, July 2, 2015 2:07 PM
20GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)Updating the FirmwareYou can update the firmware of this unit from the following support site:http://esupport.sony.com/To update the firmware, visit the support site, then follow the online instructions.During the update, do not turn the ignition to the OFF position.PrecautionsˎCool off the unit beforehand if your car has been parked in direct sunlight.ˎDo not leave audio devices brought in inside the car, or it may cause malfunction due to high temperature in direct sunlight.ˎPower antenna (aerial) extends automatically depending on the type of car.To maintain high sound qualityDo not splash liquid onto the unit.ˎYou can connect to the following iPod models. Update your iPod devices to the latest software before use.Compatible iPhone/iPod models* “SongPal” does not support iPhone 3G, iPod touch (3rd generation), iPod touch (2nd generation), iPod classic, and iPod nano.ˎ“Made for iPod,” and “Made for iPhone,” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.Additional InformationPlayback order of audio filesAbout iPodCompatible Model Bluetooth® USBiPhone 6 Plus ííiPhone 6 ííiPhone 5s ííiPhone 5c ííFolder (album)Audio file (track)iPhone 5 ííiPhone 4s ííiPhone 4 ííiPhone 3GS ííiPhone 3G* íiPod touch (5th generation) ííiPod touch (4th generation) ííiPod touch (3rd generation)* íiPod touch (2nd generation)* íiPod classic* íiPod nano (7th generation)* íiPod nano (6th generation)* íiPod nano (5th generation)* íiPod nano (4th generation)* íiPod nano (3rd generation)* íCompatible Model Bluetooth® USB010COV.book Page 20 Thursday, July 2, 2015 2:07 PM
21GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)MaintenanceReplacing the lithium battery of the remote commanderUnder normal conditions, the battery will last approximately 1 year. (The service life may be shorter, depending on the conditions of use.)When the battery becomes weak, the range of the remote commander becomes shorter.CAUTIONDanger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type.Notes on the lithium batteryˎKeep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.ˎWipe the battery with a dry cloth to ensure a good contact.ˎBe sure to observe the correct polarity when installing the battery.ˎDo not hold the battery with metallic tweezers, otherwise a short-circuit may occur.SpecificationsTuner sectionFMTuning range: 87.5 – 107.9 MHzAntenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: FM CCIR: -1,956.5 to -487.3 kHz and +500.0 to +2,095.4 kHzUsable sensitivity: 8 dBfSelectivity: 75 dB at 400 kHzSignal-to-noise ratio: 73 dBSeparation: 50 dB at 1 kHzFrequency response: 20 – 15,000 HzAMTuning range: 530 – 1,710 kHzAntenna (aerial) terminal: External antenna (aerial) connectorSensitivity: 26 μVUSB Player sectionInterface: USB (High-speed)Maximum current: 1.5 A (USB BC1.2 compliant)The maximum number of recognizable tracks: 10,000Corresponding codec: MP3 (.mp3): 16/22.05/24/32/44.1/48 kHz, 16 – 320 kbps (CBR/VBR)AAC (.m4a, .mp4, .3gp): 16/22.05/24/32/44.1/48/88.2/96 kHz, 16 – 320 kbps (CBR/VBR)WMA (.wma): 32/44.1/48 kHz, 16 – 320 kbps (CBR/VBR)WAV (.wav): 16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)AIFF (.aiff, .aif): 32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)FLAC (.flac): 16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)ALAC (.m4a): 16/22.05/24/32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)DSD (DSF/DSDIFF)* (.dsf, .dff): 2.8 MHz (1 bit)* via the USB type-A port, PCM conversion is performed during playback+ side up010COV.book Page 21 Thursday, July 2, 2015 2:07 PM
22GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)USB-DAC Player sectionInterface: USB micro BCorresponding data interface, frequency and bit rate: PCM: Max. 192 kHz/24 bitDSD:ASIO Native: 2.8 MHz/1 bit, 5.6 MHz/1 bitDoP: 2.8 MHz/1 bitWireless CommunicationCommunication System: BLUETOOTH Standard version 3.1Output: BLUETOOTH Standard Power Class 2 (Max. +4 dBm)Maximum communication range: Line of sight approx. 7 m (23 ft)*1Frequency band: 2.4 GHz band (2.4000 – 2.4835 GHz)Modulation method: FHSSCompatible BLUETOOTH Profiles*2:A2DP (Advanced Audio Distribution Profile) 1.3AVRCP (Audio Video Remote Control Profile) 1.5HFP (Handsfree Profile) 1.6SPP (Serial Port Profile)Corresponding codec: SBC (.sbc), AAC (.m4a) and LDAC (.ldac)*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna (aerial)’s performance, operating system, software application, etc.*2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.GeneralOutputs:Audio outputs terminal (front, rear, sub)Power antenna (aerial)/Power amplifier control terminal (REM OUT)Optical output terminalInputs:High level input terminal (3 V – 12 V)Remote controller input terminalAntenna (aerial) input terminalMIC input terminalAUX input jack (stereo mini jack)USB type-A port (front, rear)USB micro-B portPower requirements: 12 V DC car battery (negative ground (earth))Rated current consumption: 10 ADimensions: Approx. 178 mm × 50 mm × 167 mm (7 1/8 in × 2 in × 6 5/8 in) (w/h/d)Mounting dimensions: Approx. 182 mm × 53 mm × 154 mm (7 1/4 in × 2 1/8 in × 6 1/8 in) (w/h/d)Mass: Approx. 1.5 kg (3 lb 3 oz)Package contents:Main unit (1)Remote commander (1): RM-X261Microphone (1)Parts for installation and connections (1 set)Design and specifications are subject to change without notice.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.Google, Google Play and Android are trademarks of Google Inc.WALKMAN® and WALKMAN® logo are registered trademarks of Sony Corporation.LDAC™ and LDAC logo are trademarks of Sony Corporation.libFLACCopyright (C) 2000-2009 Josh CoalsonCopyright (C) 2011-2013 Xiph.Org FoundationRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:ˋRedistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.Copyrights010COV.book Page 22 Thursday, July 2, 2015 2:07 PM
23GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)ˋRedistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.ˋNeither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.TroubleshootingThe following checklist will help you remedy problems you may encounter with your unit.Before going through the checklist below, check the connection and operating procedures.For details on using the fuse and removing the unit from the dashboard, see “Connection/Installation” (page 33).If the problem is not solved, visit the support site on the back cover.GeneralNo power is being supplied to the unit.qIf the unit is turned off and the display disappears, the unit cannot be operated with the remote commander.ˋTurn on the unit by pressing SRC on the unit.The unit is turned off when playing at a high volume.qThe power from the power supply lead of the car may not be sufficient.ˋCheck the power connection. If no problem is found in the connection, make the power connection to the battery directly. If the situation does not improve, consult your nearest dealer.No sound or the sound is very low.qThe position of the fader control [Fader] is not set for a 2-speaker system.qThe volume of the unit and/or connected device is very low.ˋIncrease the volume of the unit and connected device.The contents of the memory have been erased.qThe reset button has been pressed.ˋStore again into the memory.qThe power supply lead or battery has been disconnected or not connected properly.Stored stations and correct time are erased.The fuse has blown.Makes a noise when the position of the ignition is switched.qThe leads are not matched correctly with the car’s accessory power connector.The display disappears from/does not appear in the display window.q[Dimmer] (dimmer) is set to [ON] (page 16).qThe display disappears if you press and hold OFF.ˋPress and hold OFF on the unit until the display appears.010COV.book Page 23 Thursday, July 2, 2015 2:07 PM
24GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)The operation buttons do not function.qThe connection is not correct.ˋCheck the connection of the unit.If the situation does not improve, press reset button (page 9).The contents stored in memory are erased.For your safety, do not reset the unit while you are driving.Radio receptionStations cannot be received.The sound is hampered by noises.qThe connection is not correct.ˋIf your car has built-in radio antenna (aerial) in the rear/side glass, connect an REM OUT lead (blue/white striped) or accessory power supply lead (red) to the power supply lead of a car’s antenna (aerial) booster.ˋCheck the connection of the car antenna (aerial).ˋIf the auto antenna (aerial) will not extend, check the connection of the power antenna (aerial) control lead.Preset tuning is not possible.qThe broadcast signal is too weak.USB device playbackYou cannot play items via a USB hub.qThis unit cannot recognize USB devices via a USB hub.A USB device takes longer to play.qThe USB device contains many files or a complicated file structure.The sound is intermittent.qThe sound may be intermittent at a high-bit-rate.qDRM (Digital Rights Management) files may not be playable in some cases.Audio file cannot be played.qUSB device formatted with file systems other than FAT16, FAT32 or exFAT are unsupported.** This unit supports FAT16, FAT32 and exFAT, but some USB device may not support all of these FAT. For details, refer to the operating instruction of each USB device or contact the manufacturer.The sampling frequency and bit rate are not displayed, or unmatched sampling frequency and bit rate are displayed.qCheck that the contents on the USB device contain the information on the sampling frequency and bit rate.qWait for a while, then press DSPL again. Reading the information may take some time.USB DAC playbackNo sound.qCheck that the High-Resolution USB Audio supported device and the unit are properly connected.qCheck that the settings of the High-Resolution USB Audio supported device are properly made.The sampling frequency and bit rate are not displayed, or unmatched sampling frequency and bit rate are displayed.qCheck that the specifications and settings of the High-Resolution USB Audio supported device are appropriate.qWait for a while, then press DSPL again. Reading the information may take some time.Computer operationNo sound or the sound is not output properly.qThe unit does not recognize the computer as a USB device.ˋRestart your computer.ˋInstall the driver software “Sony USB Device Driver” on your Windows computer if not installed. For details on the driver software, visit the website:http://esupport.sony.com/For the installation, refer to the help guide of your computer.qTurn up the volume of your computer or software.qThe computer is connected to the unit while audio playback software is in use.ˋRestart the audio playback software on the computer.qCheck that the audio playback software being used is compatible with the High-Resolution Audio files. Using “Hi-Res Audio Player” is recommended. For details, visit the website: http://esupport.sony.com/qThe computer enters standby, sleep or hibernation mode during playback.ˋRestart the audio playback software on the computer.qCheck that the sound device settings of your computer are properly made.For details, refer to the manual supplied with your computer.qCancel the sound attenuation of your computer or the audio playback software.qCheck that the CD-ROM drive supporting the digital reproduction function is used.010COV.book Page 24 Thursday, July 2, 2015 2:07 PM
25GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)NFC functionOne touch connection (NFC) is not possible.qThe BLUETOOTH signal of this unit is not turned on.ˋTurn the BLUETOOTH signal on (page 9).qIf the smartphone does not respond to the touching.ˋCheck that the NFC function of the smartphone is turned on.ˋMove the N-Mark part of the smartphone closer to the N-Mark part on this unit.ˋIf the smartphone is in a case, remove it.qNFC receiving sensitivity depends on the device.If One touch connection with the smartphone fails several times, make BLUETOOTH connection manually.BLUETOOTH functionThe connecting device cannot detect this unit.qBefore the pairing is made, set this unit to pairing standby mode.qWhile connected to a BLUETOOTH device, this unit cannot be detected from another device.ˋDisconnect the current connection and search for this unit from another device.qWhen the device pairing is made, set the BLUETOOTH signal output to on (page 10).Connection is not possible.qThe connection is controlled from one side (this unit or BLUETOOTH device), but not both.ˋConnect to this unit from a BLUETOOTH device or vice versa.The name of the detected device does not appear.qDepending on the status of the other device, it may not be possible to obtain the name.No ringtone.qAdjust the volume by rotating the volume dial while receiving a call.qDepending on the connecting device, the ringtone may not be sent properly.ˋSet [Ring Tone] to [TONE 1] (page 18).qThe front speakers are not connected to the unit.ˋConnect the front speakers to the unit. The ringtone is output only from the front speakers.The talker’s voice cannot be heard.qThe front speakers are not connected to the unit.ˋConnect the front speakers to the unit. The talker’s voice is output only from the front speakers.A call partner says that the volume is too low or high.qAdjust the volume accordingly using mic gain adjustment (page 14).Echo or noise occurs in phone call conversations.qLower the volume.qSet EC/NC Mode to [ECNC 1] or [ECNC 2] (page 14).qIf the ambient noise other than the phone call sound is loud, try reducing this noise.E.g.: If a window is open and road noise, etc., is loud, shut the window. If an air conditioner is loud, lower the air conditioner.The phone sound quality is poor.qPhone sound quality depends on reception conditions of cellular phone. ˋMove your car to a place where you can enhance the cellular phone’s signal if the reception is poor.The volume of the connected audio device is low (high).qVolume level will differ depending on the audio device.ˋAdjust the volume of the connected audio device or this unit.The sound skips during playback of a BLUETOOTH audio device.qReduce the distance between the unit and the BLUETOOTH audio device.qIf the BLUETOOTH audio device is stored in a case which interrupts the signal, remove the audio device from the case during use.qSeveral BLUETOOTH devices or other devices which emit radio waves are in use nearby.ˋTurn off the other devices.ˋIncrease the distance from the other devices.qThe playback sound stops momentarily when the connection between this unit and the cellular phone is being made. This is not a malfunction.The connected BLUETOOTH audio device cannot be controlled.qCheck that the connected BLUETOOTH audio device supports AVRCP.Some functions do not work.qCheck if the connecting device supports the functions in question.A call is answered unintentionally.qThe connecting phone is set to answer a call automatically.Pairing failed due to a timeout.qDepending on the connecting device, the time limit for pairing may be short.ˋTry completing the pairing within the time.BLUETOOTH function cannot operate.qTurn off the unit by pressing OFF for more than 2 seconds, then turn the unit on again.010COV.book Page 25 Thursday, July 2, 2015 2:07 PM
26GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)No sound is output from the car speakers during handsfree call.qIf the sound is output from the cellular phone, set the cellular phone to output the sound from the car speakers.SongPal operationApplication name is mismatched with the actual application in “SongPal”.qLaunch the application again from the “SongPal” application.While running the “SongPal” application via BLUETOOTH, the display automatically switches to [BT Audio].qThe “SongPal” application or BLUETOOTH function has failed.qRun the application again.The “SongPal” application is automatically disconnected when the display switches to [iPod1] or [iPod2].qThe “SongPal” application on iPhone/iPod does not support iPod playback.ˋChange the source of the unit to other than [iPod1] or [iPod2], then establish the “SongPal” connection (page 15).Error displays/MessagesFor USB device playbackDevice Error: The USB device cannot be played.qConnect the USB device again.No Device: A USB device is not connected or recognized.qMake sure the USB device or USB cable is securely connected.No Music: There is no playable file.qConnect a USB device containing playable files (page 21).No Output: Sound signals are not output from the OPTICAL OUT terminal.qNo sound is output from the OPTICAL OUT while native DSD playback is performed via the USB micro-B port.No Support: The USB device is not supported.qFor details on the compatibility of your USB device, visit the support site on the back cover.qUSB hubs are not supported.Overload: The USB device is overloaded.qDisconnect the USB device, then press SRC to select another source. qThe USB device has a fault, or an unsupported device is connected.Please Wait: Now reading information.qWait until reading is complete and playback starts automatically. This may take some time depending on the file organization.For BLUETOOTH function:No Device: The BLUETOOTH device is not connected or recognized.qMake sure the BLUETOOTH device is securely connected, or the BLUETOOTH connection is established with the BLUETOOTH device.For SongPal operation:APP -----: A connection with the application is not established.qMake the “SongPal” connection again (page 15).APP List: The contents list of the USB/iPod is open.qExit the list of the application to enable button operation.APP Menu: A setting display of the application is open.qExit the setting display of the application to enable button operation.Disconnect: The application is disconnected.qMake the “SongPal” connection (page 15).Open APP: The “SongPal” application is not running.qLaunch the application.Settings: A sound setting, general setting or BLUETOOTH setting display of the application is open.qExit the setting display of the application to enable button operation.If these solutions do not help improve the situation, consult your nearest Sony dealer.010COV.book Page 26 Thursday, July 2, 2015 2:07 PM
27GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)Important information on softwareThis section covers the software used by this system.ALACApache LicenseVersion 2.0, January 2004http://www.apache.org/licenses/TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION1. Definitions.“License” shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.“Licensor” shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.“Legal Entity” shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, “control” means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.“You” (or “Your”) shall mean an individual or Legal Entity exercising permissions granted by this License.“Source” form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.“Object” form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.“Work” shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).“Derivative Works” shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.“Contribution” shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, “submitted” means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as “Not a Contribution.”“Contributor” shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and(b) You must cause any modified files to carry prominent notices stating that You changed the files; and(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and(d) If the Work includes a “NOTICE” text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions.Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims 010COV.book Page 27 Thursday, July 2, 2015 2:07 PM
28GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)asserted against, such Contributor by reason of your accepting any such warranty or additional liability.END OF TERMS AND CONDITIONSAPPENDIX: How to apply the Apache License to your work.To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets “[]” replaced with your own identifying information. (Don’t include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same “printed page” as the copyright notice for easier identification within third-party archives.Copyright [yyyy] [name of copyright owner]Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License.You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.See the License for the specific language governing permissions and limitations under the License.mDNSResponderApache LicenseVersion 2.0, January 2004http://www.apache.org/licenses/TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION1. Definitions.“License” shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.“Licensor” shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.“Legal Entity” shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, “control” means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.“You” (or “Your”) shall mean an individual or Legal Entity exercising permissions granted by this License.“Source” form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.“Object” form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.“Work” shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).“Derivative Works” shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.“Contribution” shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, “submitted” means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as “Not a Contribution.”“Contributor” shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and(b) You must cause any modified files to carry prominent notices stating that You changed the files; and(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and(d) If the Work includes a “NOTICE” text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions.Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or 010COV.book Page 28 Thursday, July 2, 2015 2:07 PM
29GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.END OF TERMS AND CONDITIONSAPPENDIX: How to apply the Apache License to your work.To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets “[]” replaced with your own identifying information. (Don’t include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same “printed page” as the copyright notice for easier identification within third-party archives.Copyright [yyyy] [name of copyright owner]Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License.You may obtain a copy of the License athttp://www.apache.org/licenses/LICENSE-2.0Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.See the License for the specific language governing permissions and limitations under the License.libFLACCopyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Josh CoalsonRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:ˋRedistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.ˋRedistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.ˋNeither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.WPA Supplicant==============Copyright (c) 2003-2013, Jouni Malinen <j@w1.fi> and contributorsAll Rights Reserved.This program is licensed under the BSD license (the one with advertisement clause removed).If you are submitting changes to the project, please see CONTRIBUTIONS file for more instructions.License-------This software may be distributed, used, and modified under the terms of BSD license:Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.ExpatCopyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark CooperCopyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.This product incorporates Spotify software which is subject to 3rd party licenses found here:www.spotify.com/connect/third-party-licensesBoosthttp://www.boost.org/Boost Software License - Version 1.0 - August 17th, 2003Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the “Software”) to use, reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the Software is furnished to do so, all subject to the following:The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR 010COV.book Page 29 Thursday, July 2, 2015 2:07 PM
30GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.Expathttp://www.jclark.com/xml/expat.htmlExpat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center LtdPermission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.FastDelegatehttp://www.codeproject.com/KB/cpp/FastDelegate.aspxTHE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF THIS CODE PROJECT OPEN LICENSE (“LICENSE”). THE WORK IS PROTECTED BY COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE OF THE WORK OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR COPYRIGHT LAW IS PROHIBITED.BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HEREIN, YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE AUTHOR GRANTS YOU THE RIGHTS CONTAINED HEREIN IN CONSIDERATION OF YOUR ACCEPTANCE OF SUCH TERMS AND CONDITIONS. IF YOU DO NOT AGREE TO ACCEPT AND BE BOUND BY THE TERMS OF THIS LICENSE, YOU CANNOT MAKE ANY USE OF THE WORK.Definitions.“Articles” means, collectively, all articles written by Author which describes how the Source Code and Executable Files for the Work may be used by a user.“Author” means the individual or entity that offers the Work under the terms of this License.“Derivative Work” means a work based upon the Work or upon the Work and other pre-existing works.“Executable Files” refer to the executables, binary files, configuration and any required data files included in the Work.“Publisher” means the provider of the website, magazine, CD-ROM, DVD or other medium from or by which the Work is obtained by You.“Source Code” refers to the collection of source code and configuration files used to create the Executable Files.“Standard Version” refers to such a Work if it has not been modified, or has been modified in accordance with the consent of the Author, such consent being in the full discretion of the Author.“Work” refers to the collection of files distributed by the Publisher, including the Source Code, Executable Files, binaries, data files, documentation, whitepapers and the Articles.“You” is you, an individual or entity wishing to use the Work and exercise your rights under this License.Fair Use/Fair Use Rights. Nothing in this License is intended to reduce, limit, or restrict any rights arising from fair use, fair dealing, first sale or other limitations on the exclusive rights of the copyright owner under copyright law or other applicable laws.License Grant. Subject to the terms and conditions of this License, the Author hereby grants You a worldwide, royalty-free, non-exclusive, perpetual (for the duration of the applicable copyright) license to exercise the rights in the Work as stated below:You may use the standard version of the Source Code or Executable Files in Your own applications.You may apply bug fixes, portability fixes and other modifications obtained from the Public Domain or from the Author. A Work modified in such a way shall still be considered the standard version and will be subject to this License.You may otherwise modify Your copy of this Work (excluding the Articles) in any way to create a Derivative Work, provided that You insert a prominent notice in each changed file stating how, when and where You changed that file.You may distribute the standard version of the Executable Files and Source Code or Derivative Work in aggregate with other (possibly commercial) programs as part of a larger (possibly commercial) software distribution.The Articles discussing the Work published in any form by the author may not be distributed or republished without the Author's consent. The author retains copyright to any such Articles. You may use the Executable Files and Source Code pursuant to this License but you may not repost or republish or otherwise distribute or make available the Articles, without the prior written consent of the Author.Any subroutines or modules supplied by You and linked into the Source Code or Executable Files this Work shall not be considered part of this Work and will not be subject to the terms of this License.Patent License. Subject to the terms and conditions of this License, each Author hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, import, and otherwise transfer the Work.Restrictions. The license granted in Section 3 above is expressly made subject to and limited by the following restrictions:You agree not to remove any of the original copyright, patent, trademark, and attribution notices and associated disclaimers that may appear in the Source Code or Executable Files.You agree not to advertise or in any way imply that this Work is a product of Your own.The name of the Author may not be used to endorse or promote products derived from the Work without the prior written consent of the Author.You agree not to sell, lease, or rent any part of the Work. This does not restrict you from including the Work or any part of the Work inside a larger software distribution that itself is being sold. The Work by itself, though, cannot be sold, leased or rented.You may distribute the Executable Files and Source Code only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy of the Executable Files or Source Code You distribute and ensure that anyone receiving such Executable Files and Source Code agrees that the terms of this License apply to such Executable Files and/or Source Code. You may not offer or impose any terms on the Work that alter or restrict the terms of this License or the recipients' exercise of the rights granted hereunder. You may not sublicense the Work. You must keep intact all notices that refer to this License and to the disclaimer of warranties. You may not distribute the Executable Files or Source Code with any technological measures that control access or use of the Work in a manner inconsistent with the terms of this License.You agree not to use the Work for illegal, immoral or improper purposes, or on pages containing illegal, immoral or improper material. The Work is subject to applicable export laws. You agree to comply with all such laws and regulations that may apply to the Work after Your receipt of the Work.Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED “AS IS”, “WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME ALL RISK IN ITS USE, INCLUDING COPYRIGHT INFRINGEMENT, PATENT INFRINGEMENT, SUITABILITY, ETC. AUTHOR EXPRESSLY DISCLAIMS ALL EXPRESS, IMPLIED OR STATUTORY WARRANTIES OR CONDITIONS, INCLUDING WITHOUT LIMITATION, WARRANTIES OR CONDITIONS OF MERCHANTABILITY, MERCHANTABLE QUALITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY OF TITLE OR NON-INFRINGEMENT, OR THAT THE WORK (OR ANY PORTION THEREOF) IS CORRECT, USEFUL, BUG-FREE OR FREE OF VIRUSES. YOU MUST PASS THIS DISCLAIMER ON WHENEVER YOU DISTRIBUTE THE WORK OR DERIVATIVE WORKS.Indemnity. You agree to defend, indemnify and hold harmless the Author and the Publisher from and against any claims, suits, losses, damages, liabilities, costs, and expenses (including reasonable legal or attorneys’ fees) resulting from or relating to any use of the Work by You.Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL THE AUTHOR OR THE PUBLISHER BE LIABLE TO YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF THIS LICENSE OR THE USE OF THE WORK OR OTHERWISE, EVEN IF THE AUTHOR OR THE PUBLISHER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Term ination .This License and the rights granted hereunder will terminate automatically upon any breach by You of any term of this License. Individuals or entities who have received Derivative Works from You under this License, however, will not have their licenses terminated provided such individuals or entities remain in full compliance with those licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any termination of this License.If You bring a copyright, trademark, patent or any other infringement claim against any contributor over infringements You claim are made by the Work, your License from such contributor to the Work ends automatically.Subject to the above terms and conditions, this License is perpetual (for the duration of the applicable copyright in the Work). Notwithstanding 010COV.book Page 30 Thursday, July 2, 2015 2:07 PM
31GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)the above, the Author reserves the right to release the Work under different license terms or to stop distributing the Work at any time; provided, however that any such election will not serve to withdraw this License (or any other license that has been, or is required to be, granted under the terms of this License), and this License will continue in full force and effect unless terminated as stated above.Publisher. The parties hereby confirm that the Publisher shall not, under any circumstances, be responsible for and shall not have any liability in respect of the subject matter of this License. The Publisher makes no warranty whatsoever in connection with the Work and shall not be liable to You or any party on any legal theory for any damages whatsoever, including without limitation any general, special, incidental or consequential damages arising in connection to this license. The Publisher reserves the right to cease making the Work available to You at any time without noticeMiscellaneousThis License shall be governed by the laws of the location of the head office of the Author or if the Author is an individual, the laws of location of the principal place of residence of the Author.If any provision of this License is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this License, and without further action by the parties to this License, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable.No term or provision of this License shall be deemed waived and no breach consented to unless such waiver or consent shall be in writing and signed by the party to be charged with such waiver or consent.This License constitutes the entire agreement between the parties with respect to the Work licensed herein. There are no understandings, agreements or representations with respect to the Work not specified herein. The Author shall not be bound by any additional provisions that may appear in any communication from You. This License may not be modified without the mutual written agreement of the Author and Youlibogghttp://www.xiph.org/ogg/Copyright (c) 2002, Xiph.org FoundationRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.libvorbishttp://www.xiph.org/vorbis/Copyright (c) 2002-2004 Xiph.org FoundationRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.Tremolohttp://wss.co.uk/pinknoise/tremoloCopyright (C) 2002-2009 Xiph.org Foundation Changes Copyright (C) 2009-2010 Robin Watts for Pinknoise Productions LtdRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:ˋRedistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.ˋRedistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.ˋNeither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.Tremorhttp://wiki.xiph.org/index.php/TremorCopyright (c) 2002, Xiph.org FoundationRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:ˋRedistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.ˋRedistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.ˋNeither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.Mersenne Twisterhttp://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/MT2002/CODES/mt19937ar.cCopyright (C) 1997 - 2002, Makoto Matsumoto and Takuji Nishimura, All rights reserved.010COV.book Page 31 Thursday, July 2, 2015 2:07 PM
32GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.The names of its contributors may not be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.zlibhttp://www.zlib.net/zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.3, July 18th, 2005Copyright (C) 1995-2004 Jean-loup Gailly and Mark AdlerThis software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.This notice may not be removed or altered from any source distribution.Jean-loup Gailly jloup@gzip.org, Mark Adler madler@alumni.caltech.educURLhttp://curl.haxx.seCOPYRIGHT AND PERMISSION NOTICECopyright (c) 1996 - 2011, Daniel Stenberg, <daniel@haxx.se>.All rights reserved.Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.c-areshttp://c-ares.haxx.seCopyright 1998 by the Massachusetts Institute of Technology.Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.010COV.book Page 32 Thursday, July 2, 2015 2:07 PM
33GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)CautionsˎRun all ground (earth) leads to a common ground (earth) point.ˎDo not get the leads trapped under a screw, or caught in moving parts (e.g., seat railing).ˎBefore making connections, turn the car ignition off to avoid short circuits.ˎConnect the yellow and red power supply leads only after all other leads have been connected.ˎBe sure to insulate any loose unconnected leads with electrical tape for safety.ˎChoose the installation location carefully so that the unit will not interfere with normal driving operations.ˎAvoid installing the unit in areas subject to dust, dirt, excessive vibration, or high temperature, such as in direct sunlight or near heater ducts.ˎUse only the supplied mounting hardware for a safe and secure installation.Note on the power supply lead (yellow)When connecting this unit in combination with other stereo components, the amperage rating of the car circuit to which the unit is connected must be higher than the sum of each component’s fuse amperage rating.Mounting angle adjustmentAdjust the mounting angle to less than 45°.Parts List for InstallationˎThis parts list does not include all the package contents.ˎThe bracket ʓ and the protection collar ʕ are attached to the unit before shipping. Before mounting the unit, use the release keys ʔ to remove the bracket ʓ from the unit. For details, see “Removing the protection collar and the bracket” (page 37).ˎKeep the release keys ʔ for future use as they are also necessary if you remove the unit from your car.Connection/InstallationPrecautionsʓʕʖʗ× 45 × max. 8 mm(7/32 × max. 5/16 in)ʔ× 2ʙ ʚʘʛʜ010COV.book Page 33 Thursday, July 2, 2015 2:07 PM
34GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)Connectionʜ*11ʙ*4*5ʗfrom a wired remote control (not supplied)*3WhiteWhite/black stripedGrayBlackYello wRedBlue/white stripedfrom a car antenna (aerial)Gray/black stripedOrange/white striped*2*2*2Subwoofer*1Power amplifier*1For details, see “Making connections” (page 35).ʛWhen connecting to the battery directly*6 Portable audio deviceHigh-Resolution USB Audio supported computer or smartphoneSmartphone*8, iPod/iPhone*9, WALKMAN®, USB storage deviceSmartphone*8, iPod/iPhone*9, USB devicePower amplifier with an optical input*7BlackYellowʘ*1Front panel*1*1*1*1*10*10*10When making the high level input connection010COV.book Page 34 Thursday, July 2, 2015 2:07 PM
35GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)*1 Not supplied*2 RCA pin cord (not supplied)*3 Depending on the type of car, use an adaptor for a wired remote control (not supplied).*4 Whether in use or not, route the microphone input cord such that it does not interfere with driving operations. Secure the cord with a clamp, etc., if it is installed around your feet. *5 For details on installing the microphone, see “Installing the microphone” (page 36).*6 When the amperage rating of the fuse used on your car is 10 A, make the power connection to the battery directly to avoid short circuits.*7 When making the optical connection, an optical cable (not supplied) is required.*8 To connect a smartphone to the main unit, an appropriate cable (not supplied) is required.*9 To connect an iPod/iPhone, use the USB connection cable for iPod (not supplied).*10For details on the connection, refer to “Guide to Audio Device Connection” (page 7).*11 To secure the connectors, wrap the hook and loop fastener ʜ around the neck of connectors, then bring the ends of the hook and loop fastener together.ɞTo a common ground (earth) pointFirst connect the black ground (earth) lead, then connect the yellow and red power supply leads.ɟTo the +12 V power terminal which is energized at all timesBe sure to first connect the black ground (earth) lead to a common ground (earth) point.ɠTo the +12 V power terminal which is energized when the ignition switch is set to the accessory positionIf there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times.Be sure to first connect the black ground (earth) lead to a common ground (earth) point.ɡTo the power antenna (aerial) control lead or the power supply lead of the antenna (aerial) boosterIt is not necessary to connect this lead if there is no power antenna (aerial) or antenna (aerial) booster, or with a manually-operated telescopic antenna (aerial).To AMP REMOTE IN of an optional power amplifierThis connection is only for amplifiers and a power antenna (aerial). Connecting any other system may damage the unit.ɢTo a car’s illumination signalBe sure to first connect the black ground (earth) lead to a common ground (earth) point.When making the high level input connectionFor details, see “High level input connection” (page 36).ɣTo the left speaker output (white) of an audio deviceɤTo the right speaker output (gray) of an audio deviceWhen connecting to the battery directlyWhen the amperage rating of the fuse used on your car is 10 A, make the power connection to the battery directly to avoid short circuits.ɥto a metal point of carɦto the positive battery terminalNotesˎDespite connecting to the power supply lead of the car, the unit may not fully provide its performance due to insufficient power. In this case, make the power connection to the battery directly.ˎMake sure that the car’s battery wires connected to the car (ground (earth) to chassis) are of a wire gauge at least equal to that of the main power wire connected from the battery to the head unit.If you have any questions or problems concerning the connection, consult the dealer for details.Recommended High-Resolution USB Audio systemNoteCertain products shown in the diagram may not be available in your country or region.Making connectionsʜPower amplifier(e.g. XM-GS4)Super tweeter(e.g. XS-GS1)RSX-GS9(this unit)Full-range speaker(e.g. XS-GS1621)Power amplifier(e.g. XM-GS100)Subwoofer(e.g. XS-GSW121)010COV.book Page 35 Thursday, July 2, 2015 2:07 PM
36GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)High level input connectionFor details on the connection, refer to the manual supplied with your audio device.Optical connectionˎThis OPTICAL OUT is designed for connecting a power amplifier with an optical input. When another digital device is connected, the functions of the device may not work properly.ˎWhen making connections, do not bend the optical cable (not supplied). Doing so may prevent output of sound.ˎWhen the optical connection is made:ˋthe volume controls on the unit and the remote commander do not work.ˋ[Subwoofer], [Pos Custom], [EQ10 Preset], [Balance], [Fader] and [DSEE-HX] are automatically set to [OFF].ˋNo sound is output while native DSD playback is performed via the USB micro-B port.Power amplifier connectionStop using the unit and the power amplifier that is not supported a High-Resolution Audio, when unusual noise is generated.Memory hold connectionWhen the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.To capture your voice during handsfree calling, you need to install the microphone ʙ. CautionsˎIt is extremely dangerous if the cord becomes wound around the steering column or gearstick. Be sure to keep it and other parts from interfering with your driving operations.ˎIf airbags or any other shock-absorbing equipment is in your car, contact the store where you purchased this unit, or the car dealer, before installation.NoteBefore attaching the double-sided tape ʚ, clean the surface of the dashboard with a dry cloth.WhiteWhiteʗWhite/black striped White/black stripedGray GrayGray/black striped Gray/black stripedLeft speaker outputRight speaker outputAudio device with speaker outputsInstalling the microphoneʚʙClip (not supplied)ʙ010COV.book Page 36 Thursday, July 2, 2015 2:07 PM
37GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: RightRSX-GS94-577-101-11(1)InstallationBefore installing the unit, remove the protection collar ͨ and the bracket ʓ from the unit.1Pinch both edges of the protection collar ͨ, then pull it out.2Insert both release keys ͧ until they click, and pull down the bracket ʓ, then pull up the unit to separate.Before installing, make sure the catches on both sides of the bracket ʓ are bent inwards 2 mm (3/32 in). When mounting in a Japanese car, see “Mounting the unit in a Japanese car” (page 37).1Position the bracket ʓ inside the dashboard, then bend the claws outward for a tight fit.2Mount the unit onto the bracket ʓ, then attach the protection collar ͨ.NotesˎIf the catches are straight or bent outwards, the unit will not be installed securely and may spring out.ˎMake sure the 4 catches on the protection collar ͨ are properly engaged in the slots of the unit.Mounting the unit in a Japanese carYou may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer.TOYOTANISSANRemoving the protection collar and the bracketMounting the unit in the dashboardͨʓͧFace the hook inwards.ʓ182 mm (7 1/4 in)53 mm (2 1/8 in)Catchʓͨʖto dashboard/center consoleExisting parts supplied with your carʖBracketBracketʖto dashboard/center consoleExisting parts supplied with your carʖBracketBracket010COV.book Page 37 Thursday, July 2, 2015 2:07 PM
38GBE:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: LeftRSX-GS94-577-101-11(1)NoteTo prevent malfunction, install only with the supplied screws ʖ.For details, see “Resetting the Unit” (page 9).When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.NoteUse an appropriate tool to replace a fuse. Resetting the unitFuse replacementFuse (15 A)010COV.book Page 38 Thursday, July 2, 2015 2:07 PM
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm masterpage: Blank.RRSX-GS94-577-101-11(1)010COV.book Page 39 Thursday, July 2, 2015 2:07 PM
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\050BCO.fm masterpage: BCOhttp://www.sony.net/©2015 Sony Corporation Printed in ThailandRSX-GS94-577-101-11(1)http://esupport.sony.com/Site d’assistanceSi vous avez des questions ou si vous souhaitez consulter les toutes dernières informations techniques sur ce produit, rendez-vous sur le site Web suivant :Support siteIf you have any questions or for the latest support information on this product, please visit the web site below:If you have any questions/problemsregarding this product, try the following:1 Read Troubleshooting in these Operating Instructions.2 Please contact (U.S.A. only); Call 1-800-222-7669 URL http://www.SONY.com010COV.book Page 40 Thursday, July 2, 2015 2:07 PM

Navigation menu