Sony Group RSXGS9 Digital Media Player User Manual RSX GS9

Download:
Mirror Download [FCC.gov]
Document ID	2747894
Application ID	OLjChVNBgfOYxa4v3cR3sw==
Document Description	(Short-Term Confidential) User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	75.81kB (947655 bits)
Date Submitted	2015-09-15 00:00:00
Date Available	2015-11-15 00:00:00
Creation Date	2015-07-15 16:19:08
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2015-07-15 16:20:10
Document Title	RSX-GS9
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Sony Corporation

E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\010COV.fm
masterpage: Cover
010COV.book Page 1 Thursday, July 2, 2015 2:07 PM
4-577-101-11(1)
Digital Media
Player
Operating Instructions
GB
Mode d’emploi
FR
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. RSX-GS9
Serial No.
For the connection/installation, see page 33.
Pour le raccordement/l’installation, reportez-vous à la page 00.
RSX-GS9
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\020INT.fm
masterpage: Left
010COV.book Page 2 Thursday, July 2, 2015 2:07 PM
For safety, be sure to install this unit in the
dashboard of the car as the top of the unit
becomes hot during use.
For details, see “Connection/Installation”
(page 33).
The nameplate indicating operating voltage, etc., is
located on the bottom of the chassis.
Warning
FOR THE CUSTOMERS IN THE USA. NOT
APPLICABLE IN CANADA, INCLUDING IN THE
PROVINCE OF QUEBEC.
POUR LES CLIENTS AUX ÉTATS-UNIS. NON
APPLICABLE AU CANADA, Y COMPRIS LA
PROVINCE DE QUÉBEC.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
ˋ Reorient or relocate the receiving antenna.
ˋ Increase the separation between the
equipment and receiver.
ˋ Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
ˋ Consult the dealer or an experienced radio/TV
technician for help.
This transmitter must not be co-located or operated
in conjunction with any other antenna or
transmitter.
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for
the transmitter by Industry Canada. To reduce
potential radio interference to other users, the
antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.)
is not more than that necessary for successful
communication.
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines and RSS-102 of the IC
radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that it
deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated keeping the
radiator at least 20 cm or more away from person’s
body.
For the State of California, USA only
Perchlorate Material – special handling may apply,
See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Note on the lithium battery
Do not expose the battery to excessive heat such as
direct sunlight, fire or the like.
Disclaimer regarding services offered by
third parties
Services offered by third parties may be changed,
suspended, or terminated without prior notice.
Sony does not bear any responsibility in these sorts
of situations.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules
and Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference; and (2) This device must accept any
interference received, including interference that
may cause undesired operation of the device.
2GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\020INT.fm
masterpage: Right
010COV.book Page 3 Thursday, July 2, 2015 2:07 PM
Important notice
Caution
IN NO EVENT SHALL SONY BE LIABLE FOR ANY
INCIDENTAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR OTHER DAMAGES INCLUDING,
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF
REVENUE, LOSS OF DATA, LOSS OF USE OF THE
PRODUCT OR ANY ASSOCIATED EQUIPMENT,
DOWNTIME, AND PURCHASER’S TIME RELATED TO
OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS
HARDWARE AND/OR ITS SOFTWARE.
Dear customer, this product includes a radio
transmitter.
Please check your vehicle operation manual or
contact the manufacturer of your vehicle or your
vehicle dealer, before you install this product into
your vehicle.
Emergency calls
This BLUETOOTH car handsfree and the electronic
device connected to the handsfree operate using
radio signals, cellular, and landline networks as well
as user-programmed function, which cannot
guarantee connection under all conditions.
Therefore do not rely solely upon any electronic
device for essential communications (such as
medical emergencies).
On BLUETOOTH communication
ˎ Microwaves emitting from a BLUETOOTH device
may affect the operation of electronic medical
devices. Turn off this unit and other BLUETOOTH
devices in the following locations, as it may cause
an accident.
ˋ where inflammable gas is present, in a hospital,
train, airplane, or petrol station
ˋ near automatic doors or a fire alarm
ˎ This unit supports security capabilities that
comply with the BLUETOOTH standard to provide
a secure connection when the BLUETOOTH
wireless technology is used, but security may not
be enough depending on the setting. Be careful
when communicating using BLUETOOTH wireless
technology.
ˎ We do not take any responsibility for the leakage
of information during BLUETOOTH
communication.
If you have any questions or problems concerning
your unit that are not covered in this manual,
consult your nearest Sony dealer.
3GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\030TOC.fm
masterpage: Left
010COV.book Page 4 Thursday, July 2, 2015 2:07 PM
Connection/Installation
Table of Contents
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . 5
Guide to Audio Device Connection . . . . . . . . . . . . . 7
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts List for Installation . . . . . . . . . . . . . . . . . . . .
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
33
34
37
Getting Started
Resetting the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Preparing a BLUETOOTH Device. . . . . . . . . . . . . . . . 9
Connecting a USB Device . . . . . . . . . . . . . . . . . . . . 11
Connecting a High-Resolution USB Audio
Supported Device . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting Other Portable Audio Device . . . . . . . 11
Listening to the Radio
Listening to the Radio. . . . . . . . . . . . . . . . . . . . . . . 12
Playback
Playing a USB Device . . . . . . . . . . . . . . . . . . . . . . .
Playing a High-Resolution USB Audio Supported
Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing a BLUETOOTH Device. . . . . . . . . . . . . . . . .
Searching and Playing Tracks. . . . . . . . . . . . . . . . .
12
13
13
13
Handsfree Calling (via BLUETOOTH
only)
Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Available Operations during Call . . . . . . . . . . . . . . 14
Useful Functions
SongPal with iPhone/Android Phone . . . . . . . . . . 15
Settings
Basic Setting Operation . . . . . . . . . . . . . . . . . . . . .
General Setup (General) . . . . . . . . . . . . . . . . . . . . .
Sound Setup (Sound) . . . . . . . . . . . . . . . . . . . . . . .
BLUETOOTH Setup (BT Setting) . . . . . . . . . . . . . . .
16
16
17
18
Additional Information
Updating the Firmware. . . . . . . . . . . . . . . . . . . . . .
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important information on software. . . . . . . . . . . .
20
20
21
21
23
27
4GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 5 Thursday, July 2, 2015 2:07 PM
Guide to Parts and Controls
Main unit
ˎ In this manual, procedures are explained
mainly for the remote commander unless
otherwise specified.
ˎ Available buttons light up depending on the
selected source.
ȩ Receptor for the remote commander
Ȫ Display window
ȫ Volume dial
Rotate to adjust the volume.
N-Mark
Touch with an NFC compatible smartphone to
make a BLUETOOTH connection.
Ȭ SRC (source)
Turn on the power.
Change the source.
OFF
Press and hold for 1 second to turn the source
off and display the clock.
Press and hold for more than 2 seconds to turn
off the power and the display.
If the unit is turned off and the display
disappears, operation by the remote
commander is not available.
ȭ Ã/Ñ (prev/next)
Skip tracks; tune in the preset station.
è/ Ă (album –/+)
Press and hold for 1 second to skip albums; tune
in radio station manually.
Ȯ ā (play/pause)
Start/pause playback; change the band during
radio reception.
While playback is paused, the illumination of
the unit flashes.
PAIRING
Turn the BLUETOOTH signal on.
ȯ BLUETOOTH indicator
Ȱ Reset button (page 9)
ȱ AUX input jack
Ȳ USB micro-B port (for USB-DAC)
ȳ USB type-A port (for USB1)
Use to charge the connected device (USB Hicharge (1.5 A))
5GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 6 Thursday, July 2, 2015 2:07 PM
RM-X261 Remote commander
Ȼ R/a/{/C
Select a setup item, etc.
ENTER
Enter the selected item.
Ã/Ñ (prev/next)
Skip tracks; tune in radio station automatically.
Press and hold to tune in radio station manually.
+/– (album +/–)
Skip albums*; tune in the preset station.
* Available during USB playback only.
ȼ Number buttons (1 to 6)
Receive stored radio stations.
Press and hold to store stations.
PAUSE
Remove the insulation film before use.
The VOL (volume) + button has a tactile dot.
ȴ
(back)
Return to the previous display.
ȵ REP (repeat)
ȶ SHUF (shuffle)
ȷ ATT (attenuate)
Attenuate the sound. Press again to cancel the
attenuation.
ȸ MODE (page 12, 12)
ȹ SOUND*
Open the SOUND menu directly.
MENU*
Press and hold to open the setup menu.
* Not available when the BT phone is selected.
Ⱥ DSPL (display)
Change display items.
6GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 7 Thursday, July 2, 2015 2:07 PM
Guide to Audio Device Connection
Audio device*1 (e.g.,
WALKMAN®, digital media
player, smartphone)
Smartphone*2, iPod/iPhone*3,
WALKMAN®, USB storage
device
*1
*2*3
*1 Audio device with a stereo mini jack. When
connecting, a stereo mini plug (straight type) (not
supplied) is required.
*2 When connecting a smartphone, an appropriate USB
cable (not supplied) is required.
*3 When connecting an iPod/iPhone, a USB connection
cable for iPod/iPhone (not supplied) is required.
*4 Use an appropriate USB cable (USB-A plug to USB
micro B plug) (not supplied).
*5 For Windows, installing the dedicated driver to your
computer is required. For Mac OS, no driver is
required.
To play High-Resolution Audio files, using the audio
playback software “Hi-Res Audio Player” for
Windows/Mac OS is recommended. For details, visit
the support site on the back cover.
*6 When connecting an Android smartphone, a USB
OTG cable (not supplied) is required. Depending on
the smartphone, downloading the dedicated app for
playing High-Resolution Audio files is required.
Computer specifications
Compliant OS:
ˋ Windows 8
ˋ Windows 7
ˋ Windows Vista
ˋ Mac OS X (v10.6.8 or later)
CPU: Intel Core 2 Processor 1.6 GHz or faster
Memory: 1 GB or larger
USB port: USB 2.0 High Speed
*4
*4
*6
A compliant OS is required to be pre-installed to the
computer, and the following are not guaranteed:
ˋ a computer operating outside its normal operating
environment.
ˋ a home built computer, a computer with an
operating systems not upgraded by the computer’s
manufacturer, or a computer with multiple operating
systems.
ˋ modes such as standby, sleep, or hibernation.
Design and specifications are subject to change
without notice.
Computer*5 (e.g., with
Windows, with Mac OS)
Smartphone*6 (e.g.,
Android smartphone)
7GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 8 Thursday, July 2, 2015 2:07 PM
Playable High-Resolution Audio file formats
Playable file formats, frequencies and bit rates or bit depths differ depending on whether the USB type-A port
or the USB micro-B port is used.
USB-DAC, USB micro-B port
USB1 (front), USB type-A port
USB2 (rear), USB type-A port
DSD (DSF)
ASIO Native: 2.8 MHz/1 bit, 5.6
MHz/1 bit
DoP: 2.8 MHz/1 bit
2.8MHz (LPCM convert)
2.8MHz (LPCM convert)
DSD (DFF)
ASIO Native: 2.8 MHz/1 bit, 5.6
MHz/1 bit
DoP: 2.8 MHz/1 bit
2.8MHz (LPCM convert)
2.8MHz (LPCM convert)
LPCM
Max. 192 kHz/24 bit
–
–
16/22.05/24/32/44.1/48/88.2/
96/176.4/192 kHz (16/24 bit)
WAV (LPCM)
–
16/22.05/24/32/44.1/48/88.2/
96/176.4/192 kHz (16/24 bit)
AIFF (LPCM)
–
32/44.1/48/88.2/96/176.4/192
kHz (16/24 bit)
32/44.1/48/88.2/96/176.4/192
kHz (16/24 bit)
FLAC
–
16/22.05/24/32/44.1/48/88.2/
96/176.4/192 kHz (16/24 bit)
16/22.05/24/32/44.1/48/88.2/
96/176.4/192 kHz (16/24 bit)
ALAC
–
16/22.05/24/32/44.1/48/88.2/
96/176.4/192 kHz (16/24 bit)
16/22.05/24/32/44.1/48/88.2/
96/176.4/192 kHz (16/24 bit)
8GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 9 Thursday, July 2, 2015 2:07 PM
Getting Started
Resetting the Unit
Before operating the unit for the first time, after
replacing the car battery, or changing the
connections, you must reset the unit.
Notes
ˎ Pressing the reset button will erase the clock setting
and some stored contents.
ˎ No sound will be output for about 1 minute until the
reset of the unit is complete.
Setting the Clock
Use the remote commander to perform the
following.
Press and hold MENU, press a or { to
select [General], then press ENTER.
Press a or { to select [Clock Adjust],
then press ENTER.
The hour indication flashes.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound may
result.
Connecting with a Smartphone by One
touch (NFC)
By touching the N-Mark on the unit with an NFC*
compatible smartphone, the unit is paired and
connected with the smartphone automatically.
* NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as mobile phones and
IC tags. Thanks to the NFC function, data
communication can be achieved easily just by
touching the relevant symbol or designated location
on NFC compatible devices.
For a smartphone with Android OS 4.0 or lower
installed, downloading the app “NFC Easy Connect”
available at Google Play™ is required. The app may
not be downloadable in some countries/regions.
Alternatively, press and hold MENU on the
remote commander, select [BT setting] q [BT
Signal], then press ENTER.
The BLUETOOTH indicator on the unit flashes
(while the unit is in pairing standby mode).
Press a or { to set the hour and minute.
After setting the minute, press and hold
MENU.
Activate the NFC function on the
smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
To move the digital indication, press R or C.
Press and hold ā on the unit for more
than 2 seconds.
Touch the N-Mark part of the unit with
the N-Mark part of the smartphone.
The setup is complete and the clock starts.
To display the clock
Press DSPL.
Preparing a BLUETOOTH Device
You can enjoy music, or perform handsfree calling
depending on the BLUETOOTH compatible device
such as a smartphone, cellular phone and audio
device (hereafter “BLUETOOTH device” if not
otherwise specified). For details on connecting,
refer to the operating instructions supplied with the
device.
There are two ways for connecting the BLUETOOTH
device:
ˋ One-touch connection for the NFC compatible
BLUETOOTH device.
ˋ Manual connection.
Make sure the BLUETOOTH indicator on the unit
lights up.
To disconnect by One touch
Touch the N-Mark part of the unit with the N-Mark
part of the smartphone again.
Notes
ˎ When making the connection, handle the
smartphone carefully to prevent scratches.
ˎ One touch connection is not possible when the unit is
already connected to another NFC compatible device.
In this case, disconnect the other device, and make
connection with the smartphone again.
9GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 10 Thursday, July 2, 2015 2:07 PM
Pairing and connecting with a
BLUETOOTH device
When connecting a BLUETOOTH device for the first
time, mutual registration (called “pairing”) is
required. Pairing enables this unit and other devices
to recognize each other.
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for this
unit from another device.
To start playback
For details, see “Playing a BLUETOOTH Device”
(page 13).
To cancel pairing
Perform step 2 to cancel the pairing mode after this
unit and the BLUETOOTH device are paired.
Place the BLUETOOTH device within 1 m
(3 ft) of this unit.
Press and hold ā on the unit for more
than 2 seconds.
Alternatively, press and hold MENU on the
remote commander, select [BT setting] q [BT
Signal], then press ENTER.
Connecting with a paired BLUETOOTH
device
To use a paired device, connection with this unit is
required. Some paired devices will connect
automatically.
The BLUETOOTH indicator on the unit flashes
(while the unit is in pairing standby mode).
Perform pairing on the BLUETOOTH
device so it detects this unit.
Select [RSX-GS9] shown in the display of
the BLUETOOTH device.
Alternatively, press and hold MENU on the
remote commander, select [BT setting] q [BT
Signal], then press ENTER.
Make sure the BLUETOOTH indicator on the unit
lights up.
If your model name does not appear, repeat
from step 2.
If passkey* input is required on the
BLUETOOTH device, input [0000].
* Passkey may be called “Passcode,” “PIN code,”
“PIN number” or “Password,” etc., depending on
the device.
Input passkey
[0000]
When paired, the BLUETOOTH indicator on the
unit stays lit.
Select this unit on the BLUETOOTH device
to establish the BLUETOOTH connection.
Press and hold ā on the unit for more
than 2 seconds.
Activate the BLUETOOTH function on the
BLUETOOTH device.
Operate the BLUETOOTH device to
connect to this unit.
To connect the last-connected device from
this unit
Activate the BLUETOOTH function on the
BLUETOOTH device.
Press SOURCE (SRC), then select [BT Phone] or [BT
Audio].
Press ENTER to connect with the cellular phone, or
PAUSE to connect with the audio device.
Note
While streaming BLUETOOTH audio, you cannot
connect from this unit to the cellular phone. Connect
from the cellular phone to this unit instead.
Tip
With BLUETOOTH signal on: when the ignition is turned
to on, this unit reconnects automatically to the lastconnected cellular phone.
To install the microphone
For details, see “Installing the microphone”
(page 36).
10GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 11 Thursday, July 2, 2015 2:07 PM
Connecting a USB Device
Turn down the volume on the unit.
Connect the USB device to the USB typeA port.
To connect an iPod/iPhone, use the USB
connection cable for iPod/iPhone (not
supplied).
Connecting Other Portable
Audio Device
Turn off the portable audio device.
Turn down the volume on the unit.
Connect the portable audio device to the
AUX input jack (stereo mini jack) on the
unit with a connecting cord (not
supplied)*.
* Be sure to use a straight type plug.
Connecting a High-Resolution
USB Audio Supported Device
Turn down the volume on the unit.
Connect a High-Resolution USB Audio
supported computer or smartphone to
the USB micro-B port.
For details, see “Guide to Audio Device
Connection” (page 7).
Press SRC to select [AUX1].
To match the volume level of the connected
device to other sources
Start playback of the portable audio device at a
moderate volume, and set your usual listening
volume on the unit.
Press and hold MENU, then select [Sound] q [AUX
Level] (page 18).
11GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 12 Thursday, July 2, 2015 2:07 PM
Listening to the Radio
Playback
Listening to the Radio
Playing a USB Device
To listen to the radio, press SOURCE (SRC) to select
[Tuner].
In these Operating Instructions, “iPod” is used as a
general reference for the iPod functions on an iPod
and iPhone, unless otherwise specified by the text
or illustrations.
Use the remote commander to perform the
following.
Storing automatically (BTM)
Press MODE to change the band (FM1,
FM2, FM3, AM1 or AM2).
Alternatively, press ā on the unit to change
the band.
Press and hold MENU, press a or { to
select [General], then press ENTER.
Press a or { to select [BTM], then press
ENTER.
The unit stores stations in order of frequency on
the number buttons.
Tuning
Press MODE to change the band (FM1,
FM2, FM3, AM1 or AM2).
Alternatively, press ā on the unit to change
the band.
Perform tuning.
For details on the compatibility of your iPod, see
“About iPod” (page 20) or visit the support site on
the back cover.
MSC (Mass Storage Class)-type USB devices (such as
a USB flash drive, digital media player, Android
phone) compliant with the USB standard can be
used.
Depending on the digital media player or Android
phone, setting the USB connection mode to MSC is
required.
Notes
ˎ For details on the compatibility of your USB device,
visit the support site on the back cover.
ˎ During USB playback via the USB type-A port, a DSD
file on the connected device is converted into PCM
format.
ˎ Playback of the following files is not supported.
MP3/WMA/AAC/FLAC:
ˋ copyright-protected files
ˋ DRM (Digital Rights Management) files
ˋ Multi-channel audio files
MP3/WMA/AAC:
ˋ lossless compression files
WAV:
ˋ Multi-channel audio files
To tune manually
Press and hold R or C to locate the
approximate frequency, then press R or C
repeatedly to fine adjust to the desired
frequency.
To tune automatically
Press R or C (Alternatively, press and hold
à or Ñ on the unit for more than 1 second.)
Scanning stops when the unit receives a station.
Connect a USB device to the USB type-A
port (page 11).
Playback starts. (Depending on the file
organization, playback may take time to start.)
If a device is already connected, to start
playback, press SOURCE (SRC) to select [USB1] or
[USB2] ([iPod1] or [iPod2] appears in the display
when the iPod is recognized).
Adjust the volume on this unit.
To pause playback
Storing manually
While receiving the station that you want
to store, press and hold a number button
(1 to 6) until [MEM] appears.
Receiving the stored stations
Select the band, then press a number
button (1 to 6).
Press ā.
To remove the device
Stop playback, then remove the device.
To display the sampling frequency and bit
rate
Press DSPL during playback.
While DSD playback is performed via USB1 or USB2,
the sampling frequency and bit rate before
converting into the PCM format are displayed.
Alternatively, press à or Ñ on the unit.
12GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 13 Thursday, July 2, 2015 2:07 PM
Caution for iPhone
When you connect an iPhone via USB, phone call
volume is controlled by the iPhone, not the unit. Do
not inadvertently increase the volume on the unit
during a call, as a sudden loud sound may result
when the call ends.
Playing a BLUETOOTH Device
You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile). Using an LDAC-supported
device is recommended.
Playing a High-Resolution USB
Audio Supported Device
For details on the compatibility of your HighResolution USB Audio device and the DSD
supported audio playback software or app, see the
support site on the back cover.
Make BLUETOOTH connection with the
audio device (page 9).
Press SRC to select [BT Audio].
Alternatively, press SOURCE on the remote
commander.
For your safety
ˎ Do not operate the High-Resolution USB Audio
supported device while driving.
ˎ Before driving your car, make sure the HighResolution USB Audio supported device will not
play loudly during playback (especially during
DSD playback).
Connect a High-Resolution USB Audio
supported device to the USB micro-B
port (page 11).
Playback starts.
If a device is already connected, to start
playback, press SOURCE (SRC) to select [USBDAC].
Adjust the volume on this unit.
To stop playback
Operate the device to stop playback.
The controls on the unit or the remote commander
do not work.
To remove the device
Stop playback, then remove the device.
To display the sampling frequency and bit
rate
Operate the audio device to start
playback.
Adjust the volume on this unit.
Notes
ˎ Depending on the audio device, information such as
track number/time and playback status may not be
displayed on this unit.
ˎ Even if the source is changed on this unit, playback of
the audio device does not stop.
ˎ [BT Audio] does not appear in the display while
running the “SongPal” application via the BLUETOOTH
function.
To match the volume level of the BLUETOOTH
device to other sources
Start playback of the BLUETOOTH audio device at a
moderate volume, and set your usual listening
volume on the unit.
Press and hold MENU, then select [BT Setting] q
[BTA Level] (page 18).
To apply the SBC codec only
Press and hold MENU on the remote, then set
[Audio Codec] in [BT Setting] to [SBC] (page 18).
Press DSPL during playback.
Note
For a DSD file on the device connected via the USB
micro-B port, native DSD playback is performed. During
playback, make sure that the DSD playback on the
High-Resolution USB Audio supported device is
properly performed.
Playback of the following mode or method is
supported.
ˋ PCM:
Max. 192 kHz/24 bit
ˋ DSD (DSF/DSDIFF):
ASIO Native: 2.8 MHz/1 bit, 5.6 MHz/1 bit
DoP: 2.8 MHz/1 bit
Searching and Playing Tracks
Use the remote commander to perform the
following.
Repeat play and shuffle play
During USB1 or USB2 playback, press REP
or SHUF repeatedly to select the desired
play mode.
Playback in the selected play mode may take
time to start.
13GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 14 Thursday, July 2, 2015 2:07 PM
To reduce echo and noise (Echo Canceler/
Noise Canceler Mode)
Handsfree Calling (via BLUETOOTH
only)
To use a cellular phone, connect it with this unit. For
details, see “Preparing a BLUETOOTH Device”
(page 9). Only during a call, [BT Phone] becomes
available when selecting the source.
Press Ñ during a call.
Settable mode: [ECNC 1], [ECNC 2].
To switch between hands-free mode and
handheld mode
During a call, press ā to switch the phone call
audio between the unit and cellular phone.
Note
Depending on the cellular phone, this operation may
not be available.
Use the controls on the unit to perform the
following.
Receiving a Call
Press any button when a call is received
with a ringtone.
The phone call starts.
Note
The ringtone and talker’s voice are output only from the
front speakers.
To reject the call
Press and hold any button for 2 seconds.
To end the call
Press SRC.
Making a Call
You can make a call via “SongPal” only. For details,
see “SongPal with iPhone/Android Phone”
(page 15).
Available Operations during
Call
To adjust the ringtone volume
Rotate the volume dial while receiving a call.
To adjust the talker’s voice volume
Rotate the volume dial during a call.
To adjust the volume for the other party (Mic
gain adjustment)
Press à during a call.
Adjustable volume levels: [MIC High], [MIC Low],
[MIC Middle].
14GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 15 Thursday, July 2, 2015 2:07 PM
Selecting the source or application
Useful Functions
SongPal with iPhone/Android
Phone
Downloading the “SongPal”
application (version 3.0 or later)
is required from the App Store
for iPhone or from Google Play
for Android phone.
Notes
ˎ For your safety, follow your local
traffic laws and regulations, and
do not operate the application
while driving.
ˎ “SongPal” is an app for
controlling Sony audio devices
which are compatible with “SongPal”, by your iPhone/
Android phone.
ˎ What you can control with “SongPal” varies
depending on the connected device.
ˎ To make use of “SongPal” features, see the details on
your iPhone/Android phone.
ˎ For further details on “SongPal,” visit the following
URL: http://rd1.sony.net/help/speaker/songpal/
Establishing the SongPal connection
Make the BLUETOOTH connection with
iPhone/Android phone (page 9).
Launch the “SongPal” application.
You can operate to select the desired source or
application on iPhone/Android phone.
To select the source
Press SOURCE repeatedly.
Note
While “Device Setting” is selected, the controls on the
unit and remote commander do not work. Operate your
iPhone/Android phone.
To display the source list
Press SOURCE.
Announcement of various information by
voice guide (Android phone only)
When SMS, Twitter/Facebook/Calendar
notifications, etc., are received, they are
automatically announced through the car speakers.
Connection to iPhone/Android phone starts.
For details on the operations on iPhone/
Android phone, see the help of the application.
If the device number appears
Make sure that the number is displayed (e.g.,
123456), then select [Yes] on the iPhone/Android
phone.
To terminate connection
Press and hold ENTER.
For details on settings, refer to the help of the
application.
Replying a message of SMS (Android
phone only)
You can reply a message by voice recognition.
Activate voice recognition, then input “Reply
(Replay).”
The message input display appears on the “SongPal”
application.
Input a reply message by voice recognition.
The list of message candidates appears on the
“SongPal” application.
Rotate the volume dial to select the desired
message, then press it.
The message is sent out.
15GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 16 Thursday, July 2, 2015 2:07 PM
Making sound and display settings
You can adjust the settings relating to sound and
display via iPhone/Android smartphone.
Settings
Basic Setting Operation
You can set items in the following setup categories:
General setup (General), Sound setup (Sound),
BLUETOOTH setup (BT Setting)
Setting by “SongPal” is also available (page 15).
(Not available when the BT phone is selected.)
For details on settings, refer to the help of the
application.
Use the remote commander to perform the
following.
Press and hold MENU, press a or { to
select the setup category, then press
ENTER.
The items that can be set differ depending on
the source and settings.
Press a or { to select the options, then
press ENTER.
To return to the previous display
Press
General Setup (General)
Clock Adjust (page 9)
Dimmer
Dims the display: [ON], [OFF], [Auto].
([Auto] is available only when the illumination
control lead is connected, and turn on the head
light).
Optical Out
Selects the optical output setting: [OFF],
[48kHz], [96kHz].
(The volume control on the unit does not work
when set to [48kHz] or [96kHz], press ATT on the
remote commander).
BTM (best tuning memory) (page 12)
(Available only when the tuner is selected.)
16GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 17 Thursday, July 2, 2015 2:07 PM
Firmware
Checks/updates the firmware version. For
details, visit the following support site:
http://esupport.sony.com/
Version
Displays current firmware version.
Update
Enters firmware update process: [NO], [YES].
Updating the firmware takes a few minutes to
complete. During the update, do not turn the
ignition to the OFF position.
(Available only while the source is off and the
clock is displayed.)
Pos Custom (position custom)
Sets [Custom] of [Pos Preset].
(Available when any source except for BT phone
is selected.) (Automatically set to [OFF] when
[Optical Out] is set to [48kHz] or [96kHz].)
Front Left, Front Right, Rear Left, Rear Right,
Subwoofer
Sets the distance from your desired position to
the speaker.
Adjustable range: [0] – [350] cm
Pos Preset (position preset)
Sound Setup (Sound)
This setup menu can also be opened by pressing
SOUND. If [Optical Out] is set to [48kHz] or [96kHz],
this setup menu is not available.
Subwoofer
(Automatically set to [OFF] when [Optical Out] is
set to [48kHz] or [96kHz].) (Not available while
USB-DAC is selected and DSD playback is
performed.)
Sub Level (subwoofer level)
Adjusts the subwoofer volume level:
[+10dB] – [0dB] – [-10dB].
Sub Phase (subwoofer phase)
Selects the subwoofer phase: [Normal],
[Reverse].
LPF Freq (low pass filter frequency)
Selects the subwoofer cut-off frequency: [OFF],
[50Hz], [63Hz], [79Hz], [99Hz], [125Hz], [158Hz],
[198Hz], [250Hz].
LPF Slope (low pass filter slope)
Selects the LPF slope: [SLP1] (-12dB/oct), [SLP2]
(-24dB/oct), [SLP3] (-36dB/oct), [SLP4] (-48dB/
oct).
LPF Mode (low pass filter mode)
Sets the filter mode: [Mono], [Stereo].
HPF Freq (high pass filter frequency)
Selects the front/rear speaker cut-off frequency:
[OFF], [50Hz], [63Hz], [79Hz], [99Hz], [125Hz],
[158Hz], [198Hz], [250Hz].
HPF Slope (high pass filter slope)
Selects the HPF slope (effective only when [HPF
Freq] is set to other than [OFF]): [SLP1] (-12dB/
oct), [SLP2] (-24dB/oct), [SLP3] (-36dB/oct),
[SLP4] (-48dB/oct).
Sub DSD (subwoofer DSO)
(Available only while USB-DAC is selected and
DSD playback is performed.)
LPF Freq (low pass filter frequency)
Selects the subwoofer cut-off frequency: [OFF],
[150Hz].
LPF Mode (low pass filter mode)
Sets the filter mode: [Mono], [Stereo].
F/R Pos (front/rear position)
Simulates a natural sound field by delaying the
sound output from speakers to suit your
position:
ɞ [Front Left],
ɟ [Front Right],
ɠ [Center Front],
ɡ [ALL] (center of your car),
[Custom] (position set in [Pos Custom]),
[OFF] (no position set)
Adjust Pos* (adjust position)
Fine-tunes the listening position setting: [+3] –
[0] – [-3].
Subwoofer* (subwoofer position)
ʭ [Near],
ʮ [Normal],
ʯ [Far]
EQ10 Preset
Selects an equalizer curve from 10 equalizer
curves or off: [OFF], [R & B], [Rock], [Pop],
[Dance], [Hip-Hop], [Electronica], [Jazz], [Soul],
[Country], [Regueton], [Salsa], [Afro Pop],
[Bongo], [Bollywood], [Custom] (equalizer curve
set by “SongPal”).
The equalizer curve setting can be memorized
for each source.
(Available when any source except for USB-DAC
or BT phone is selected.) (Automatically set to
[OFF] when [Optical Out] is set to [48kHz] or
[96kHz].)
(Not available while USB-DAC is selected and
DSD playback is performed.)
Balance
Adjusts the sound balance: [R-15] – [Center] –
[L-15].
(Available when any source except for BT phone
is selected.) (Automatically set to [OFF] when
[Optical Out] is set to [48kHz] or [96kHz].)
17GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 18 Thursday, July 2, 2015 2:07 PM
Fader
Adjusts the relative level: [F-15] – [Center] –
[R-15].
(Available when any source except for BT phone
is selected.) (Automatically set to [OFF] when
[Optical Out] is set to [48kHz] or [96kHz].)
BT Initialize
Initializes all the BLUETOOTH related settings
(pairing information, preset number, device
information, etc.): [NO], [YES].
When disposing the unit, initialize all the
settings.
Loudness
Reinforces bass and treble for clear sound at low
volume levels: [OFF], [ON].
(Not available while USB-DAC is selected and
native DSD playback is performed.)
DSEE-HX (digital sound enhancement engine HX)
Improves digitally compressed sound by
restoring high frequencies lost in the
compression process.
This setting can be memorized for each source
other than the tuner or AUX.
Selects the DSEE HX mode: [OFF], [ON].
(Available only when USB1, USB2, USB-DAC or BT
Audio is selected.) (Automatically set to [OFF]
when [Optical Out] is set except for [OFF].) (Not
available while USB-DAC is selected and DSD
playback is performed.)
AUX Level
Adjusts the volume level for each connected
auxiliary device: [+18dB] – [0dB] – [-8dB].
This setting negates the need to adjust the
volume level between sources.
* Does not appear when [F/R Pos] is set to [OFF].
BLUETOOTH Setup (BT Setting)
BT Signal (BLUETOOTH signal) (page 10, 10)
Activates/deactivates the BLUETOOTH function.
BT Pairing (BLUETOOTH pairing) (page 00)
BTA Level (BLUETOOTH audio level)
Adjusts the volume level for each connected
BLUETOOTH device: [+6dB] – [0dB] – [-6dB]. This
setting negates the need to adjust the volume
level between sources.
Audio Codec
Selects the BLUETOOTH audio codec type:
[AUTO] (LDAC, AAC, SBC), [SBC].
(Not available via “SongPal”.)
Auto Answer
Sets this unit to answer an incoming call
automatically: [OFF], [3sec], [10sec].
Ring Tone
Selects whether this unit or the connected
cellular phone outputs the ringtone: [TONE 1]
(this unit), [TONE 2] (cellular phone).
18GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 19 Thursday, July 2, 2015 2:07 PM
Optical output setting and available sound settings
Available sound settings differ depending on the optical output setting and the selected source.
Optical
Out
Tuner
USB-DAC
(DSD)
AUX1
(front)
AUX2 (High
level input)
BT Audio
BT
Phone
í
í
OFF
×
Max.
48 kHz
Max.
48 kHz
×
×
×
í
Max.
48 kHz
×
48kHz,
96kHz
×
×
×
×
×
×
×
×
OFF
48kHz,
96kHz
í
í
í
×
í
í
í
×
×
×
×
×
×
×
×
×
DSEE-HX
EQ10 Preset
Loudness
Subwoofer
USB1 (front),
USB2 (rear)
USB-DAC
(PCM)
OFF
í
í
í
×
í
í
í
×
48kHz,
96kHz
×
×
×
×
×
×
×
×
OFF
í
í
í
×
í
í
í
×
48kHz,
96kHz
×
×
×
×
×
×
×
×
OFF
í
í
í
(OFF,
150 Hz)
í
í
í
×
48kHz,
96kHz
×
×
×
×
×
×
×
×
Sub DSD
Pos Custom
Fader
Balance
í
OFF
í
í
í
í
í
í
í
×
48kHz,
96kHz
×
×
×
×
×
×
×
×
OFF
í
í
í
í
í
í
í
×
48kHz,
96kHz
×
×
×
×
×
×
×
×
OFF
í
í
í
í
í
í
í
×
48kHz,
96kHz
×
×
×
×
×
×
×
×
19GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 20 Thursday, July 2, 2015 2:07 PM
Compatible Model
Additional Information
Updating the Firmware
You can update the firmware of this unit from the
following support site:
http://esupport.sony.com/
To update the firmware, visit the support site, then
follow the online instructions.
During the update, do not turn the ignition to the
OFF position.
Precautions
ˎ Cool off the unit beforehand if your car has been
parked in direct sunlight.
ˎ Do not leave audio devices brought in inside the
car, or it may cause malfunction due to high
temperature in direct sunlight.
ˎ Power antenna (aerial) extends automatically
depending on the type of car.
To maintain high sound quality
Do not splash liquid onto the unit.
Playback order of audio files
Folder (album)
Bluetooth®
USB
iPhone 5
í
í
iPhone 4s
í
í
iPhone 4
í
í
iPhone 3GS
í
í
í
iPhone 3G*
iPod touch
(5th generation)
í
í
iPod touch
(4th generation)
í
í
iPod touch
(3rd generation)*
í
iPod touch
(2nd generation)*
í
iPod classic*
í
iPod nano
(7th generation)*
í
iPod nano
(6th generation)*
í
iPod nano
(5th generation)*
í
iPod nano
(4th generation)*
í
iPod nano
(3rd generation)*
í
* “SongPal” does not support iPhone 3G, iPod touch
(3rd generation), iPod touch (2nd generation), iPod
classic, and iPod nano.
Audio file (track)
ˎ “Made for iPod,” and “Made for iPhone,” mean
that an electronic accessory has been designed to
connect specifically to iPod or iPhone,
respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that the use of
this accessory with iPod or iPhone may affect
wireless performance.
About iPod
ˎ You can connect to the following iPod models.
Update your iPod devices to the latest software
before use.
If you have any questions or problems concerning
your unit that are not covered in this manual,
consult your nearest Sony dealer.
Compatible iPhone/iPod models
Compatible Model
Bluetooth®
USB
iPhone 6 Plus
í
í
iPhone 6
í
í
iPhone 5s
í
í
iPhone 5c
í
í
20GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 21 Thursday, July 2, 2015 2:07 PM
Maintenance
Specifications
Replacing the lithium battery of the remote
commander
Tuner section
Under normal conditions, the battery will last
approximately 1 year. (The service life may be
shorter, depending on the conditions of use.)
When the battery becomes weak, the range of the
remote commander becomes shorter.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replaced only with the same or
equivalent type.
+ side up
FM
Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
FM CCIR: -1,956.5 to -487.3 kHz and
+500.0 to +2,095.4 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 73 dB
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM
Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Sensitivity: 26 μV
Notes on the lithium battery
ˎ Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
ˎ Wipe the battery with a dry cloth to ensure a good
contact.
ˎ Be sure to observe the correct polarity when installing
the battery.
ˎ Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
USB Player section
Interface: USB (High-speed)
Maximum current: 1.5 A (USB BC1.2 compliant)
The maximum number of recognizable tracks:
10,000
Corresponding codec:
MP3 (.mp3):
16/22.05/24/32/44.1/48 kHz, 16 – 320 kbps
(CBR/VBR)
AAC (.m4a, .mp4, .3gp):
16/22.05/24/32/44.1/48/88.2/96 kHz,
16 – 320 kbps (CBR/VBR)
WMA (.wma):
32/44.1/48 kHz, 16 – 320 kbps (CBR/VBR)
WAV (.wav):
16/22.05/24/32/44.1/48/88.2/96/176.4/
192 kHz (16/24 bit)
AIFF (.aiff, .aif):
32/44.1/48/88.2/96/176.4/192 kHz (16/24 bit)
FLAC (.flac):
16/22.05/24/32/44.1/48/88.2/96/176.4/
192 kHz (16/24 bit)
ALAC (.m4a):
16/22.05/24/32/44.1/48/88.2/96/176.4/
192 kHz (16/24 bit)
DSD (DSF/DSDIFF)* (.dsf, .dff):
2.8 MHz (1 bit)
* via the USB type-A port, PCM conversion is
performed during playback
21GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 22 Thursday, July 2, 2015 2:07 PM
USB-DAC Player section
Interface: USB micro B
Corresponding data interface, frequency and bit
rate:
PCM: Max. 192 kHz/24 bit
DSD:
ASIO Native: 2.8 MHz/1 bit, 5.6 MHz/1 bit
DoP: 2.8 MHz/1 bit
Wireless Communication
Communication System:
BLUETOOTH Standard version 3.1
Output:
BLUETOOTH Standard Power Class 2
(Max. +4 dBm)
Maximum communication range:
Line of sight approx. 7 m (23 ft)*1
Frequency band:
2.4 GHz band (2.4000 – 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles*2:
A2DP (Advanced Audio Distribution Profile) 1.3
AVRCP (Audio Video Remote Control Profile) 1.5
HFP (Handsfree Profile) 1.6
SPP (Serial Port Profile)
Corresponding codec:
SBC (.sbc), AAC (.m4a) and LDAC (.ldac)
*1 The actual range will vary depending on factors such
as obstacles between devices, magnetic fields
around a microwave oven, static electricity,
reception sensitivity, antenna (aerial)’s performance,
operating system, software application, etc.
*2 BLUETOOTH standard profiles indicate the purpose
of BLUETOOTH communication between devices.
General
Outputs:
Audio outputs terminal (front, rear, sub)
Power antenna (aerial)/Power amplifier control
terminal (REM OUT)
Optical output terminal
Inputs:
High level input terminal (3 V – 12 V)
Remote controller input terminal
Antenna (aerial) input terminal
MIC input terminal
AUX input jack (stereo mini jack)
USB type-A port (front, rear)
USB micro-B port
Power requirements: 12 V DC car battery (negative
ground (earth))
Rated current consumption: 10 A
Dimensions:
Approx. 178 mm × 50 mm × 167 mm
(7 1/8 in × 2 in × 6 5/8 in) (w/h/d)
Mounting dimensions:
Approx. 182 mm × 53 mm × 154 mm
(7 1/4 in × 2 1/8 in × 6 1/8 in) (w/h/d)
Mass: Approx. 1.5 kg (3 lb 3 oz)
Package contents:
Main unit (1)
Remote commander (1): RM-X261
Microphone (1)
Parts for installation and connections (1 set)
Design and specifications are subject to change
without notice.
Copyrights
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Sony Corporation is under
license. Other trademarks and trade names are
those of their respective owners.
The N-Mark is a trademark or registered trademark
of NFC Forum, Inc. in the United States and in other
countries.
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service
mark of Apple Inc.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.
Google, Google Play and Android are trademarks of
Google Inc.
WALKMAN® and WALKMAN® logo are registered
trademarks of Sony Corporation.
LDAC™ and LDAC logo are trademarks of Sony
Corporation.
libFLAC
Copyright (C) 2000-2009 Josh Coalson
Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms,
with or without modification, are permitted
provided that the following conditions are met:
ˋ Redistributions of source code must retain the
above copyright notice, this list of conditions and
the following disclaimer.
22GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 23 Thursday, July 2, 2015 2:07 PM
ˋ Redistributions in binary form must reproduce
the above copyright notice, this list of conditions
and the following disclaimer in the
documentation and/or other materials provided
with the distribution.
ˋ Neither the name of the Xiph.org Foundation nor
the names of its contributors may be used to
endorse or promote products derived from this
software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Troubleshooting
The following checklist will help you remedy
problems you may encounter with your unit.
Before going through the checklist below, check
the connection and operating procedures.
For details on using the fuse and removing the unit
from the dashboard, see “Connection/Installation”
(page 33).
If the problem is not solved, visit the support site on
the back cover.
General
No power is being supplied to the unit.
q If the unit is turned off and the display
disappears, the unit cannot be operated with the
remote commander.
ˋ Turn on the unit by pressing SRC on the unit.
The unit is turned off when playing at a high
volume.
q The power from the power supply lead of the car
may not be sufficient.
ˋ Check the power connection. If no problem is
found in the connection, make the power
connection to the battery directly.
If the situation does not improve, consult your
nearest dealer.
No sound or the sound is very low.
q The position of the fader control [Fader] is not set
for a 2-speaker system.
q The volume of the unit and/or connected device
is very low.
ˋ Increase the volume of the unit and connected
device.
The contents of the memory have been erased.
q The reset button has been pressed.
ˋ Store again into the memory.
q The power supply lead or battery has been
disconnected or not connected properly.
Stored stations and correct time are erased.
The fuse has blown.
Makes a noise when the position of the ignition
is switched.
q The leads are not matched correctly with the car’s
accessory power connector.
The display disappears from/does not appear in
the display window.
q [Dimmer] (dimmer) is set to [ON] (page 16).
q The display disappears if you press and hold OFF.
ˋ Press and hold OFF on the unit until the display
appears.
23GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 24 Thursday, July 2, 2015 2:07 PM
The operation buttons do not function.
q The connection is not correct.
ˋ Check the connection of the unit.
If the situation does not improve, press reset
button (page 9).
The contents stored in memory are erased.
For your safety, do not reset the unit while you
are driving.
Radio reception
Stations cannot be received.
The sound is hampered by noises.
q The connection is not correct.
ˋ If your car has built-in radio antenna (aerial) in
the rear/side glass, connect an REM OUT lead
(blue/white striped) or accessory power supply
lead (red) to the power supply lead of a car’s
antenna (aerial) booster.
ˋ Check the connection of the car antenna
(aerial).
ˋ If the auto antenna (aerial) will not extend,
check the connection of the power antenna
(aerial) control lead.
Preset tuning is not possible.
q The broadcast signal is too weak.
USB device playback
You cannot play items via a USB hub.
q This unit cannot recognize USB devices via a USB
hub.
A USB device takes longer to play.
q The USB device contains many files or a
complicated file structure.
The sound is intermittent.
q The sound may be intermittent at a high-bit-rate.
q DRM (Digital Rights Management) files may not
be playable in some cases.
Audio file cannot be played.
q USB device formatted with file systems other
than FAT16, FAT32 or exFAT are unsupported.*
* This unit supports FAT16, FAT32 and exFAT, but some
USB device may not support all of these FAT. For
details, refer to the operating instruction of each USB
device or contact the manufacturer.
The sampling frequency and bit rate are not
displayed, or unmatched sampling frequency
and bit rate are displayed.
q Check that the contents on the USB device
contain the information on the sampling
frequency and bit rate.
q Wait for a while, then press DSPL again. Reading
the information may take some time.
USB DAC playback
No sound.
q Check that the High-Resolution USB Audio
supported device and the unit are properly
connected.
q Check that the settings of the High-Resolution
USB Audio supported device are properly made.
The sampling frequency and bit rate are not
displayed, or unmatched sampling frequency
and bit rate are displayed.
q Check that the specifications and settings of the
High-Resolution USB Audio supported device are
appropriate.
q Wait for a while, then press DSPL again. Reading
the information may take some time.
Computer operation
No sound or the sound is not output properly.
q The unit does not recognize the computer as a
USB device.
ˋ Restart your computer.
ˋ Install the driver software “Sony USB Device
Driver” on your Windows computer if not
installed. For details on the driver software,
visit the website:
http://esupport.sony.com/
For the installation, refer to the help guide of
your computer.
q Turn up the volume of your computer or
software.
q The computer is connected to the unit while
audio playback software is in use.
ˋ Restart the audio playback software on the
computer.
q Check that the audio playback software being
used is compatible with the High-Resolution
Audio files. Using “Hi-Res Audio Player” is
recommended. For details, visit the website:
http://esupport.sony.com/
q The computer enters standby, sleep or
hibernation mode during playback.
ˋ Restart the audio playback software on the
computer.
q Check that the sound device settings of your
computer are properly made.
For details, refer to the manual supplied with
your computer.
q Cancel the sound attenuation of your computer
or the audio playback software.
q Check that the CD-ROM drive supporting the
digital reproduction function is used.
24GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 25 Thursday, July 2, 2015 2:07 PM
NFC function
One touch connection (NFC) is not possible.
q The BLUETOOTH signal of this unit is not turned
on.
ˋ Turn the BLUETOOTH signal on (page 9).
q If the smartphone does not respond to the
touching.
ˋ Check that the NFC function of the smartphone
is turned on.
ˋ Move the N-Mark part of the smartphone
closer to the N-Mark part on this unit.
ˋ If the smartphone is in a case, remove it.
q NFC receiving sensitivity depends on the device.
If One touch connection with the smartphone
fails several times, make BLUETOOTH connection
manually.
BLUETOOTH function
The connecting device cannot detect this unit.
q Before the pairing is made, set this unit to pairing
standby mode.
q While connected to a BLUETOOTH device, this
unit cannot be detected from another device.
ˋ Disconnect the current connection and search
for this unit from another device.
q When the device pairing is made, set the
BLUETOOTH signal output to on (page 10).
Connection is not possible.
q The connection is controlled from one side (this
unit or BLUETOOTH device), but not both.
ˋ Connect to this unit from a BLUETOOTH device
or vice versa.
The name of the detected device does not
appear.
q Depending on the status of the other device, it
may not be possible to obtain the name.
No ringtone.
q Adjust the volume by rotating the volume dial
while receiving a call.
q Depending on the connecting device, the
ringtone may not be sent properly.
ˋ Set [Ring Tone] to [TONE 1] (page 18).
q The front speakers are not connected to the unit.
ˋ Connect the front speakers to the unit. The
ringtone is output only from the front speakers.
The talker’s voice cannot be heard.
q The front speakers are not connected to the unit.
ˋ Connect the front speakers to the unit. The
talker’s voice is output only from the front
speakers.
A call partner says that the volume is too low or
high.
q Adjust the volume accordingly using mic gain
adjustment (page 14).
Echo or noise occurs in phone call conversations.
q Lower the volume.
q Set EC/NC Mode to [ECNC 1] or [ECNC 2] (page 14).
q If the ambient noise other than the phone call
sound is loud, try reducing this noise.
E.g.: If a window is open and road noise, etc., is
loud, shut the window. If an air conditioner is
loud, lower the air conditioner.
The phone sound quality is poor.
q Phone sound quality depends on reception
conditions of cellular phone.
ˋ Move your car to a place where you can
enhance the cellular phone’s signal if the
reception is poor.
The volume of the connected audio device is low
(high).
q Volume level will differ depending on the audio
device.
ˋ Adjust the volume of the connected audio
device or this unit.
The sound skips during playback of a
BLUETOOTH audio device.
q Reduce the distance between the unit and the
BLUETOOTH audio device.
q If the BLUETOOTH audio device is stored in a case
which interrupts the signal, remove the audio
device from the case during use.
q Several BLUETOOTH devices or other devices
which emit radio waves are in use nearby.
ˋ Turn off the other devices.
ˋ Increase the distance from the other devices.
q The playback sound stops momentarily when the
connection between this unit and the cellular
phone is being made. This is not a malfunction.
The connected BLUETOOTH audio device cannot
be controlled.
q Check that the connected BLUETOOTH audio
device supports AVRCP.
Some functions do not work.
q Check if the connecting device supports the
functions in question.
A call is answered unintentionally.
q The connecting phone is set to answer a call
automatically.
Pairing failed due to a timeout.
q Depending on the connecting device, the time
limit for pairing may be short.
ˋ Try completing the pairing within the time.
BLUETOOTH function cannot operate.
q Turn off the unit by pressing OFF for more than 2
seconds, then turn the unit on again.
25GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 26 Thursday, July 2, 2015 2:07 PM
No sound is output from the car speakers during
handsfree call.
q If the sound is output from the cellular phone, set
the cellular phone to output the sound from the
car speakers.
SongPal operation
Application name is mismatched with the actual
application in “SongPal”.
q Launch the application again from the “SongPal”
application.
While running the “SongPal” application via
BLUETOOTH, the display automatically switches
to [BT Audio].
q The “SongPal” application or BLUETOOTH
function has failed.
q Run the application again.
The “SongPal” application is automatically
disconnected when the display switches to
[iPod1] or [iPod2].
q The “SongPal” application on iPhone/iPod does
not support iPod playback.
ˋ Change the source of the unit to other than
[iPod1] or [iPod2], then establish the “SongPal”
connection (page 15).
Error displays/Messages
For USB device playback
Device Error: The USB device cannot be played.
q Connect the USB device again.
No Device: A USB device is not connected or
recognized.
q Make sure the USB device or USB cable is securely
connected.
No Music: There is no playable file.
q Connect a USB device containing playable files
(page 21).
No Output: Sound signals are not output from the
OPTICAL OUT terminal.
q No sound is output from the OPTICAL OUT while
native DSD playback is performed via the USB
micro-B port.
Overload: The USB device is overloaded.
q Disconnect the USB device, then press SRC to
select another source.
q The USB device has a fault, or an unsupported
device is connected.
Please Wait: Now reading information.
q Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
For BLUETOOTH function:
No Device: The BLUETOOTH device is not
connected or recognized.
q Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
For SongPal operation:
APP -----: A connection with the application is not
established.
q Make the “SongPal” connection again (page 15).
APP List: The contents list of the USB/iPod is open.
q Exit the list of the application to enable button
operation.
APP Menu: A setting display of the application is
open.
q Exit the setting display of the application to
enable button operation.
Disconnect: The application is disconnected.
q Make the “SongPal” connection (page 15).
Open APP: The “SongPal” application is not
running.
q Launch the application.
Settings: A sound setting, general setting or
BLUETOOTH setting display of the application is
open.
q Exit the setting display of the application to
enable button operation.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
No Support: The USB device is not supported.
q For details on the compatibility of your USB
device, visit the support site on the back cover.
q USB hubs are not supported.
26GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 27 Thursday, July 2, 2015 2:07 PM
Important information on
software
This section covers the software used by this
system.
ALAC
alone or by combination of their Contribution(s) with the Work to
which such Contribution(s) was submitted. If You institute patent
litigation against any entity (including a cross-claim or counterclaim
in a lawsuit) alleging that the Work or a Contribution incorporated
within the Work constitutes direct or contributory patent
infringement, then any patent licenses granted to You under this
License for that Work shall terminate as of the date such litigation is
filed.
4. Redistribution. You may reproduce and distribute copies of the Work
or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You meet
the following conditions:
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
(a) You must give any other recipients of the Work or Derivative
Works a copy of this License; and
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and
1. Definitions.
“License” shall mean the terms and conditions for use, reproduction,
and distribution as defined by Sections 1 through 9 of this document.
“Licensor” shall mean the copyright owner or entity authorized by the
copyright owner that is granting the License.
“Legal Entity” shall mean the union of the acting entity and all other
entities that control, are controlled by, or are under common control
with that entity. For the purposes of this definition, “control” means (i)
the power, direct or indirect, to cause the direction or management
of such entity, whether by contract or otherwise, or (ii) ownership of
fifty percent (50%) or more of the outstanding shares, or (iii)
beneficial ownership of such entity.
“You” (or “Your”) shall mean an individual or Legal Entity exercising
permissions granted by this License.
“Source” form shall mean the preferred form for making
modifications, including but not limited to software source code,
documentation source, and configuration files.
“Object” form shall mean any form resulting from mechanical
transformation or translation of a Source form, including but not
limited to compiled object code, generated documentation, and
conversions to other media types.
“Work” shall mean the work of authorship, whether in Source or
Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work (an
example is provided in the Appendix below).
“Derivative Works” shall mean any work, whether in Source or Object
form, that is based on (or derived from) the Work and for which the
editorial revisions, annotations, elaborations, or other modifications
represent, as a whole, an original work of authorship. For the
purposes of this License, Derivative Works shall not include works
that remain separable from, or merely link (or bind by name) to the
interfaces of, the Work and Derivative Works thereof.
“Contribution” shall mean any work of authorship, including the
original version of the Work and any modifications or additions to
that Work or Derivative Works thereof, that is intentionally submitted
to Licensor for inclusion in the Work by the copyright owner or by an
individual or Legal Entity authorized to submit on behalf of the
copyright owner. For the purposes of this definition, “submitted”
means any form of electronic, verbal, or written communication sent
to the Licensor or its representatives, including but not limited to
communication on electronic mailing lists, source code control
systems, and issue tracking systems that are managed by, or on
behalf of, the Licensor for the purpose of discussing and improving
the Work, but excluding communication that is conspicuously
marked or otherwise designated in writing by the copyright owner as
“Not a Contribution.”
“Contributor” shall mean Licensor and any individual or Legal Entity
on behalf of whom a Contribution has been received by Licensor and
subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of, publicly
display, publicly perform, sublicense, and distribute the Work and
such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this
License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made,
use, offer to sell, sell, import, and otherwise transfer the Work, where
such license applies only to those patent claims licensable by such
Contributor that are necessarily infringed by their Contribution(s)
(c) You must retain, in the Source form of any Derivative Works that
You distribute, all copyright, patent, trademark, and attribution
notices from the Source form of the Work, excluding those notices
that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a “NOTICE” text file as part of its distribution,
then any Derivative Works that You distribute must include a
readable copy of the attribution notices contained within such
NOTICE file, excluding those notices that do not pertain to any part
of the Derivative Works, in at least one of the following places:
within a NOTICE text file distributed as part of the Derivative
Works; within the Source form or documentation, if provided
along with the Derivative Works; or, within a display generated by
the Derivative Works, if and wherever such third-party notices
normally appear. The contents of the NOTICE file are for
informational purposes only and do not modify the License. You
may add Your own attribution notices within Derivative Works that
You distribute, alongside or as an addendum to the NOTICE text
from the Work, provided that such additional attribution notices
cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications
and may provide additional or different license terms and conditions
for use, reproduction, or distribution of Your modifications, or for any
such Derivative Works as a whole, provided Your use, reproduction,
and distribution of the Work otherwise complies with the conditions
stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise,
any Contribution intentionally submitted for inclusion in the Work by
You to the Licensor shall be under the terms and conditions of this
License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or
modify the terms of any separate license agreement you may have
executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade
names, trademarks, service marks, or product names of the Licensor,
except as required for reasonable and customary use in describing
the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed
to in writing, Licensor provides the Work (and each Contributor
provides its Contributions) on an “AS IS” BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or conditions of
TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any
risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether
in tort (including negligence), contract, or otherwise, unless required
by applicable law (such as deliberate and grossly negligent acts) or
agreed to in writing, shall any Contributor be liable to You for
damages, including any direct, indirect, special, incidental, or
consequential damages of any character arising as a result of this
License or out of the use or inability to use the Work (including but
not limited to damages for loss of goodwill, work stoppage,
computer failure or malfunction, or any and all other commercial
damages or losses), even if such Contributor has been advised of the
possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the
Work or Derivative Works thereof, You may choose to offer, and
charge a fee for, acceptance of support, warranty, indemnity, or other
liability obligations and/or rights consistent with this License.
However, in accepting such obligations, You may act only on Your
own behalf and on Your sole responsibility, not on behalf of any other
Contributor, and only if You agree to indemnify, defend, and hold
each Contributor harmless for any liability incurred by, or claims
27GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 28 Thursday, July 2, 2015 2:07 PM
asserted against, such Contributor by reason of your accepting any
such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following
boilerplate notice, with the fields enclosed by brackets “[]” replaced with
your own identifying information. (Don’t include the brackets!) The text
should be enclosed in the appropriate comment syntax for the file
format. We also recommend that a file or class name and description of
purpose be included on the same “printed page” as the copyright notice
for easier identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the “License”); you may
not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an “AS IS” BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied.
See the License for the specific language governing permissions and
limitations under the License.
mDNSResponder
“Contributor” shall mean Licensor and any individual or Legal Entity
on behalf of whom a Contribution has been received by Licensor and
subsequently incorporated within the Work.
2. Grant of Copyright License. Subject to the terms and conditions of
this License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of, publicly
display, publicly perform, sublicense, and distribute the Work and
such Derivative Works in Source or Object form.
3. Grant of Patent License. Subject to the terms and conditions of this
License, each Contributor hereby grants to You a perpetual,
worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made,
use, offer to sell, sell, import, and otherwise transfer the Work, where
such license applies only to those patent claims licensable by such
Contributor that are necessarily infringed by their Contribution(s)
alone or by combination of their Contribution(s) with the Work to
which such Contribution(s) was submitted. If You institute patent
litigation against any entity (including a cross-claim or counterclaim
in a lawsuit) alleging that the Work or a Contribution incorporated
within the Work constitutes direct or contributory patent
infringement, then any patent licenses granted to You under this
License for that Work shall terminate as of the date such litigation is
filed.
4. Redistribution. You may reproduce and distribute copies of the Work
or Derivative Works thereof in any medium, with or without
modifications, and in Source or Object form, provided that You meet
the following conditions:
Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/
(a) You must give any other recipients of the Work or Derivative
Works a copy of this License; and
TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
(b) You must cause any modified files to carry prominent notices
stating that You changed the files; and
1. Definitions.
“License” shall mean the terms and conditions for use, reproduction,
and distribution as defined by Sections 1 through 9 of this document.
“Licensor” shall mean the copyright owner or entity authorized by the
copyright owner that is granting the License.
“Legal Entity” shall mean the union of the acting entity and all other
entities that control, are controlled by, or are under common control
with that entity. For the purposes of this definition, “control” means (i)
the power, direct or indirect, to cause the direction or management
of such entity, whether by contract or otherwise, or (ii) ownership of
fifty percent (50%) or more of the outstanding shares, or (iii)
beneficial ownership of such entity.
“You” (or “Your”) shall mean an individual or Legal Entity exercising
permissions granted by this License.
“Source” form shall mean the preferred form for making
modifications, including but not limited to software source code,
documentation source, and configuration files.
“Object” form shall mean any form resulting from mechanical
transformation or translation of a Source form, including but not
limited to compiled object code, generated documentation, and
conversions to other media types.
“Work” shall mean the work of authorship, whether in Source or
Object form, made available under the License, as indicated by a
copyright notice that is included in or attached to the work (an
example is provided in the Appendix below).
“Derivative Works” shall mean any work, whether in Source or Object
form, that is based on (or derived from) the Work and for which the
editorial revisions, annotations, elaborations, or other modifications
represent, as a whole, an original work of authorship. For the
purposes of this License, Derivative Works shall not include works
that remain separable from, or merely link (or bind by name) to the
interfaces of, the Work and Derivative Works thereof.
“Contribution” shall mean any work of authorship, including the
original version of the Work and any modifications or additions to
that Work or Derivative Works thereof, that is intentionally submitted
to Licensor for inclusion in the Work by the copyright owner or by an
individual or Legal Entity authorized to submit on behalf of the
copyright owner. For the purposes of this definition, “submitted”
means any form of electronic, verbal, or written communication sent
to the Licensor or its representatives, including but not limited to
communication on electronic mailing lists, source code control
systems, and issue tracking systems that are managed by, or on
behalf of, the Licensor for the purpose of discussing and improving
the Work, but excluding communication that is conspicuously
marked or otherwise designated in writing by the copyright owner as
“Not a Contribution.”
(c) You must retain, in the Source form of any Derivative Works that
You distribute, all copyright, patent, trademark, and attribution
notices from the Source form of the Work, excluding those notices
that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a “NOTICE” text file as part of its distribution,
then any Derivative Works that You distribute must include a
readable copy of the attribution notices contained within such
NOTICE file, excluding those notices that do not pertain to any part
of the Derivative Works, in at least one of the following places:
within a NOTICE text file distributed as part of the Derivative
Works; within the Source form or documentation, if provided
along with the Derivative Works; or, within a display generated by
the Derivative Works, if and wherever such third-party notices
normally appear. The contents of the NOTICE file are for
informational purposes only and do not modify the License. You
may add Your own attribution notices within Derivative Works that
You distribute, alongside or as an addendum to the NOTICE text
from the Work, provided that such additional attribution notices
cannot be construed as modifying the License.
You may add Your own copyright statement to Your modifications
and may provide additional or different license terms and conditions
for use, reproduction, or distribution of Your modifications, or for any
such Derivative Works as a whole, provided Your use, reproduction,
and distribution of the Work otherwise complies with the conditions
stated in this License.
5. Submission of Contributions. Unless You explicitly state otherwise,
any Contribution intentionally submitted for inclusion in the Work by
You to the Licensor shall be under the terms and conditions of this
License, without any additional terms or conditions.
Notwithstanding the above, nothing herein shall supersede or
modify the terms of any separate license agreement you may have
executed with Licensor regarding such Contributions.
6. Trademarks. This License does not grant permission to use the trade
names, trademarks, service marks, or product names of the Licensor,
except as required for reasonable and customary use in describing
the origin of the Work and reproducing the content of the NOTICE file.
7. Disclaimer of Warranty. Unless required by applicable law or agreed
to in writing, Licensor provides the Work (and each Contributor
provides its Contributions) on an “AS IS” BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied, including, without limitation, any warranties or conditions of
TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
PARTICULAR PURPOSE. You are solely responsible for determining the
appropriateness of using or redistributing the Work and assume any
risks associated with Your exercise of permissions under this License.
8. Limitation of Liability. In no event and under no legal theory, whether
in tort (including negligence), contract, or otherwise, unless required
by applicable law (such as deliberate and grossly negligent acts) or
28GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 29 Thursday, July 2, 2015 2:07 PM
agreed to in writing, shall any Contributor be liable to You for
damages, including any direct, indirect, special, incidental, or
consequential damages of any character arising as a result of this
License or out of the use or inability to use the Work (including but
not limited to damages for loss of goodwill, work stoppage,
computer failure or malfunction, or any and all other commercial
damages or losses), even if such Contributor has been advised of the
possibility of such damages.
9. Accepting Warranty or Additional Liability. While redistributing the
Work or Derivative Works thereof, You may choose to offer, and
charge a fee for, acceptance of support, warranty, indemnity, or other
liability obligations and/or rights consistent with this License.
However, in accepting such obligations, You may act only on Your
own behalf and on Your sole responsibility, not on behalf of any other
Contributor, and only if You agree to indemnify, defend, and hold
each Contributor harmless for any liability incurred by, or claims
asserted against, such Contributor by reason of your accepting any
such warranty or additional liability.
END OF TERMS AND CONDITIONS
APPENDIX: How to apply the Apache License to your work.
To apply the Apache License to your work, attach the following
boilerplate notice, with the fields enclosed by brackets “[]” replaced with
your own identifying information. (Don’t include the brackets!) The text
should be enclosed in the appropriate comment syntax for the file
format. We also recommend that a file or class name and description of
purpose be included on the same “printed page” as the copyright notice
for easier identification within third-party archives.
Copyright [yyyy] [name of copyright owner]
Licensed under the Apache License, Version 2.0 (the “License”); you may
not use this file except in compliance with the License.
You may obtain a copy of the License at
License
------This software may be distributed, used, and modified under the terms of
BSD license:
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the
distribution.
3. Neither the name(s) of the above-listed copyright holder(s) nor the
names of its contributors may be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an “AS IS” BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
implied.
See the License for the specific language governing permissions and
limitations under the License.
libFLAC
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Josh
Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
ˋ Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
ˋ Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
ˋ Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
WPA Supplicant
==============
Copyright (c) 2003-2013, Jouni Malinen  and contributors
All Rights Reserved.
This program is licensed under the BSD license (the one with
advertisement clause removed).
If you are submitting changes to the project, please see CONTRIBUTIONS
file for more instructions.
Expat
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and
Clark Cooper
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the Software),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
This product incorporates Spotify software which is subject to 3rd party
licenses found here:
www.spotify.com/connect/third-party-licenses
Boost
http://www.boost.org/
Boost Software License - Version 1.0 - August 17th, 2003
Permission is hereby granted, free of charge, to any person or
organization obtaining a copy of the software and accompanying
documentation covered by this license (the “Software”) to use,
reproduce, display, distribute, execute, and transmit the Software, and
to prepare derivative works of the Software, and to permit third-parties
to whom the Software is furnished to do so, all subject to the following:
The copyright notices in the Software and this entire statement,
including the above license grant, this restriction and the following
disclaimer, must be included in all copies of the Software, in whole or in
part, and all derivative works of the Software, unless such copies or
derivative works are solely in the form of machine-executable object
code generated by a source language processor.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND
NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR
29GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 30 Thursday, July 2, 2015 2:07 PM
ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES
OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Expat
http://www.jclark.com/xml/expat.html
Expat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software
Center Ltd
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
“Software”), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to permit
persons to whom the Software is furnished to do so, subject to the
following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
FastDelegate
http://www.codeproject.com/KB/cpp/FastDelegate.aspx
THE WORK (AS DEFINED BELOW) IS PROVIDED UNDER THE TERMS OF
THIS CODE PROJECT OPEN LICENSE (“LICENSE”). THE WORK IS
PROTECTED BY COPYRIGHT AND/OR OTHER APPLICABLE LAW. ANY USE
OF THE WORK OTHER THAN AS AUTHORIZED UNDER THIS LICENSE OR
COPYRIGHT LAW IS PROHIBITED.
BY EXERCISING ANY RIGHTS TO THE WORK PROVIDED HEREIN, YOU
ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS LICENSE. THE
AUTHOR GRANTS YOU THE RIGHTS CONTAINED HEREIN IN
CONSIDERATION OF YOUR ACCEPTANCE OF SUCH TERMS AND
CONDITIONS. IF YOU DO NOT AGREE TO ACCEPT AND BE BOUND BY THE
TERMS OF THIS LICENSE, YOU CANNOT MAKE ANY USE OF THE WORK.
Definitions.
“Articles” means, collectively, all articles written by Author which
describes how the Source Code and Executable Files for the Work may
be used by a user.
“Author” means the individual or entity that offers the Work under the
terms of this License.
“Derivative Work” means a work based upon the Work or upon the Work
and other pre-existing works.
“Executable Files” refer to the executables, binary files, configuration
and any required data files included in the Work.
“Publisher” means the provider of the website, magazine, CD-ROM, DVD
or other medium from or by which the Work is obtained by You.
“Source Code” refers to the collection of source code and configuration
files used to create the Executable Files.
“Standard Version” refers to such a Work if it has not been modified, or
has been modified in accordance with the consent of the Author, such
consent being in the full discretion of the Author.
“Work” refers to the collection of files distributed by the Publisher,
including the Source Code, Executable Files, binaries, data files,
documentation, whitepapers and the Articles.
“You” is you, an individual or entity wishing to use the Work and exercise
your rights under this License.
Fair Use/Fair Use Rights. Nothing in this License is intended to reduce,
limit, or restrict any rights arising from fair use, fair dealing, first sale or
other limitations on the exclusive rights of the copyright owner under
copyright law or other applicable laws.
License Grant. Subject to the terms and conditions of this License, the
Author hereby grants You a worldwide, royalty-free, non-exclusive,
perpetual (for the duration of the applicable copyright) license to
exercise the rights in the Work as stated below:
You may use the standard version of the Source Code or Executable Files
in Your own applications.
You may apply bug fixes, portability fixes and other modifications
obtained from the Public Domain or from the Author. A Work modified in
such a way shall still be considered the standard version and will be
subject to this License.
You may otherwise modify Your copy of this Work (excluding the
Articles) in any way to create a Derivative Work, provided that You insert
a prominent notice in each changed file stating how, when and where
You changed that file.
You may distribute the standard version of the Executable Files and
Source Code or Derivative Work in aggregate with other (possibly
commercial) programs as part of a larger (possibly commercial) software
distribution.
The Articles discussing the Work published in any form by the author
may not be distributed or republished without the Author's consent. The
author retains copyright to any such Articles. You may use the
Executable Files and Source Code pursuant to this License but you may
not repost or republish or otherwise distribute or make available the
Articles, without the prior written consent of the Author.
Any subroutines or modules supplied by You and linked into the Source
Code or Executable Files this Work shall not be considered part of this
Work and will not be subject to the terms of this License.
Patent License. Subject to the terms and conditions of this License, each
Author hereby grants to You a perpetual, worldwide, non-exclusive, nocharge, royalty-free, irrevocable (except as stated in this section) patent
license to make, have made, use, import, and otherwise transfer the
Work.
Restrictions. The license granted in Section 3 above is expressly made
subject to and limited by the following restrictions:
You agree not to remove any of the original copyright, patent,
trademark, and attribution notices and associated disclaimers that may
appear in the Source Code or Executable Files.
You agree not to advertise or in any way imply that this Work is a
product of Your own.
The name of the Author may not be used to endorse or promote
products derived from the Work without the prior written consent of the
Author.
You agree not to sell, lease, or rent any part of the Work. This does not
restrict you from including the Work or any part of the Work inside a
larger software distribution that itself is being sold. The Work by itself,
though, cannot be sold, leased or rented.
You may distribute the Executable Files and Source Code only under the
terms of this License, and You must include a copy of, or the Uniform
Resource Identifier for, this License with every copy of the Executable
Files or Source Code You distribute and ensure that anyone receiving
such Executable Files and Source Code agrees that the terms of this
License apply to such Executable Files and/or Source Code. You may not
offer or impose any terms on the Work that alter or restrict the terms of
this License or the recipients' exercise of the rights granted hereunder.
You may not sublicense the Work. You must keep intact all notices that
refer to this License and to the disclaimer of warranties. You may not
distribute the Executable Files or Source Code with any technological
measures that control access or use of the Work in a manner
inconsistent with the terms of this License.
You agree not to use the Work for illegal, immoral or improper purposes,
or on pages containing illegal, immoral or improper material. The Work
is subject to applicable export laws. You agree to comply with all such
laws and regulations that may apply to the Work after Your receipt of the
Work.
Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED
“AS IS”, “WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE
USER, ASSUME ALL RISK IN ITS USE, INCLUDING COPYRIGHT
INFRINGEMENT, PATENT INFRINGEMENT, SUITABILITY, ETC. AUTHOR
EXPRESSLY DISCLAIMS ALL EXPRESS, IMPLIED OR STATUTORY
WARRANTIES OR CONDITIONS, INCLUDING WITHOUT LIMITATION,
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, MERCHANTABLE
QUALITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY
OF TITLE OR NON-INFRINGEMENT, OR THAT THE WORK (OR ANY
PORTION THEREOF) IS CORRECT, USEFUL, BUG-FREE OR FREE OF
VIRUSES. YOU MUST PASS THIS DISCLAIMER ON WHENEVER YOU
DISTRIBUTE THE WORK OR DERIVATIVE WORKS.
Indemnity. You agree to defend, indemnify and hold harmless the
Author and the Publisher from and against any claims, suits, losses,
damages, liabilities, costs, and expenses (including reasonable legal or
attorneys’ fees) resulting from or relating to any use of the Work by You.
Limitation on Liability. EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE
LAW, IN NO EVENT WILL THE AUTHOR OR THE PUBLISHER BE LIABLE TO
YOU ON ANY LEGAL THEORY FOR ANY SPECIAL, INCIDENTAL,
CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES ARISING OUT OF
THIS LICENSE OR THE USE OF THE WORK OR OTHERWISE, EVEN IF THE
AUTHOR OR THE PUBLISHER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Termination.
This License and the rights granted hereunder will terminate
automatically upon any breach by You of any term of this License.
Individuals or entities who have received Derivative Works from You
under this License, however, will not have their licenses terminated
provided such individuals or entities remain in full compliance with
those licenses. Sections 1, 2, 6, 7, 8, 9, 10 and 11 will survive any
termination of this License.
If You bring a copyright, trademark, patent or any other infringement
claim against any contributor over infringements You claim are made by
the Work, your License from such contributor to the Work ends
automatically.
Subject to the above terms and conditions, this License is perpetual (for
the duration of the applicable copyright in the Work). Notwithstanding
30GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 31 Thursday, July 2, 2015 2:07 PM
the above, the Author reserves the right to release the Work under
different license terms or to stop distributing the Work at any time;
provided, however that any such election will not serve to withdraw this
License (or any other license that has been, or is required to be, granted
under the terms of this License), and this License will continue in full
force and effect unless terminated as stated above.
Publisher. The parties hereby confirm that the Publisher shall not, under
any circumstances, be responsible for and shall not have any liability in
respect of the subject matter of this License. The Publisher makes no
warranty whatsoever in connection with the Work and shall not be liable
to You or any party on any legal theory for any damages whatsoever,
including without limitation any general, special, incidental or
consequential damages arising in connection to this license. The
Publisher reserves the right to cease making the Work available to You at
any time without notice
Miscellaneous
This License shall be governed by the laws of the location of the head
office of the Author or if the Author is an individual, the laws of location
of the principal place of residence of the Author.
If any provision of this License is invalid or unenforceable under
applicable law, it shall not affect the validity or enforceability of the
remainder of the terms of this License, and without further action by the
parties to this License, such provision shall be reformed to the minimum
extent necessary to make such provision valid and enforceable.
No term or provision of this License shall be deemed waived and no
breach consented to unless such waiver or consent shall be in writing
and signed by the party to be charged with such waiver or consent.
This License constitutes the entire agreement between the parties with
respect to the Work licensed herein. There are no understandings,
agreements or representations with respect to the Work not specified
herein. The Author shall not be bound by any additional provisions that
may appear in any communication from You. This License may not be
modified without the mutual written agreement of the Author and You
libogg
http://www.xiph.org/ogg/
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
libvorbis
http://www.xiph.org/vorbis/
Copyright (c) 2002-2004 Xiph.org Foundation
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Tremolo
http://wss.co.uk/pinknoise/tremolo
Copyright (C) 2002-2009 Xiph.org Foundation Changes Copyright (C)
2009-2010 Robin Watts for Pinknoise Productions Ltd
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
ˋ Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
ˋ Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
ˋ Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Tremor
http://wiki.xiph.org/index.php/Tremor
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
ˋ Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
ˋ Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
ˋ Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Mersenne Twister
http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/MT2002/CODES/
mt19937ar.c
Copyright (C) 1997 - 2002, Makoto Matsumoto and Takuji Nishimura,
All rights reserved.
31GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 32 Thursday, July 2, 2015 2:07 PM
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
The names of its contributors may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of M.I.T. not be used in
advertising or publicity pertaining to distribution of the software without
specific, written prior permission. M.I.T. makes no representations about
the suitability of this software for any purpose. It is provided “as is”
without express or implied warranty.
zlib
http://www.zlib.net/
zlib.h -- interface of the ‘zlib’ general purpose compression library
version 1.2.3, July 18th, 2005
Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler
This software is provided ‘as-is’, without any express or implied
warranty. In no event will the authors be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software in a
product, an acknowledgment in the product documentation would be
appreciated but is not required.
Altered source versions must be plainly marked as such, and must not
be misrepresented as being the original software.
This notice may not be removed or altered from any source distribution.
Jean-loup Gailly jloup@gzip.org, Mark Adler madler@alumni.caltech.edu
cURL
http://curl.haxx.se
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2011, Daniel Stenberg, .
All rights reserved.
Permission to use, copy, modify, and distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH
THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or other
dealings in this Software without prior written authorization of the
copyright holder.
c-ares
http://c-ares.haxx.se
Copyright 1998 by the Massachusetts Institute of Technology.
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
32GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 33 Thursday, July 2, 2015 2:07 PM
Connection/Installation
Parts List for Installation
ʓ
ʔ
Cautions
ˎ Run all ground (earth) leads to a common
ground (earth) point.
ˎ Do not get the leads trapped under a screw, or
caught in moving parts (e.g., seat railing).
ˎ Before making connections, turn the car ignition
off to avoid short circuits.
ˎ Connect the yellow and red power supply leads
only after all other leads have been connected.
ˎ Be sure to insulate any loose unconnected leads
with electrical tape for safety.
×2
ʕ
ʖ
5 × max. 8 mm
(7/32 × max. 5/16 in)
×4
ʗ
ʘ
ʙ
ʚ
ʛ
ʜ
Precautions
ˎ Choose the installation location carefully so that
the unit will not interfere with normal driving
operations.
ˎ Avoid installing the unit in areas subject to dust,
dirt, excessive vibration, or high temperature,
such as in direct sunlight or near heater ducts.
ˎ Use only the supplied mounting hardware for a
safe and secure installation.
Note on the power supply lead (yellow)
When connecting this unit in combination with other
stereo components, the amperage rating of the car
circuit to which the unit is connected must be higher
than the sum of each component’s fuse amperage
rating.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
ˎ This parts list does not include all the package
contents.
ˎ The bracket ʓ and the protection collar ʕ are
attached to the unit before shipping. Before
mounting the unit, use the release keys ʔ to
remove the bracket ʓ from the unit. For details,
see “Removing the protection collar and the
bracket” (page 37).
ˎ Keep the release keys ʔ for future use as they are
also necessary if you remove the unit from your
car.
33GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 34 Thursday, July 2, 2015 2:07 PM
Connection
Subwoofer*1
*2
*2
*2
ʜ*11
Power amplifier*1
ʛ
*1
Smartphone*8, iPod/
iPhone*9, USB device
from a wired remote control
(not supplied)*3
*1
Power amplifier with
an optical input
*7
ʙ*4*5
Front panel
*1
Smartphone*8, iPod/
iPhone*9, WALKMAN®,
USB storage device
*10
ʗ
ʘ
*1
*10
High-Resolution USB Audio
supported computer or
smartphone
*1
*10
Portable audio device
Black
Yellow
When connecting to the battery directly*6
Black
Yellow
For details, see “Making
connections” (page 35).
Red
Blue/white striped
Orange/white striped
When making the high level input connection
White
White/black striped
Gray
Gray/black striped
from a car antenna (aerial)
34GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 35 Thursday, July 2, 2015 2:07 PM
*1 Not supplied
*2 RCA pin cord (not supplied)
*3 Depending on the type of car, use an adaptor for a
wired remote control (not supplied).
*4 Whether in use or not, route the microphone input
cord such that it does not interfere with driving
operations. Secure the cord with a clamp, etc., if it is
installed around your feet.
*5 For details on installing the microphone, see
“Installing the microphone” (page 36).
*6 When the amperage rating of the fuse used on your
car is 10 A, make the power connection to the
battery directly to avoid short circuits.
*7 When making the optical connection, an optical
cable (not supplied) is required.
*8 To connect a smartphone to the main unit, an
appropriate cable (not supplied) is required.
*9 To connect an iPod/iPhone, use the USB connection
cable for iPod (not supplied).
*10For details on the connection, refer to “Guide to
Audio Device Connection” (page 7).
*11 To secure the connectors, wrap the hook and loop
fastener ʜ around the neck of connectors, then
bring the ends of the hook and loop fastener
together.
ʜ
Making connections
ɞ To a common ground (earth) point
First connect the black ground (earth) lead, then
connect the yellow and red power supply leads.
ɟ To the +12 V power terminal which is
energized at all times
Be sure to first connect the black ground (earth)
lead to a common ground (earth) point.
ɠ To the +12 V power terminal which is
energized when the ignition switch is set to
the accessory position
If there is no accessory position, connect to the
+12 V power (battery) terminal which is
energized at all times.
Be sure to first connect the black ground (earth)
lead to a common ground (earth) point.
ɡ To the power antenna (aerial) control lead or
the power supply lead of the antenna (aerial)
booster
It is not necessary to connect this lead if there is
no power antenna (aerial) or antenna (aerial)
booster, or with a manually-operated telescopic
antenna (aerial).
To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers and a
power antenna (aerial). Connecting any other
system may damage the unit.
ɢ To a car’s illumination signal
Be sure to first connect the black ground (earth)
lead to a common ground (earth) point.
When making the high level input
connection
For details, see “High level input connection”
(page 36).
ɣ To the left speaker output (white) of an audio
device
ɤ To the right speaker output (gray) of an audio
device
When connecting to the battery directly
When the amperage rating of the fuse used on your
car is 10 A, make the power connection to the
battery directly to avoid short circuits.
ɥ to a metal point of car
ɦ to the positive battery terminal
Notes
ˎ Despite connecting to the power supply lead of the
car, the unit may not fully provide its performance
due to insufficient power. In this case, make the
power connection to the battery directly.
ˎ Make sure that the car’s battery wires connected to
the car (ground (earth) to chassis) are of a wire gauge
at least equal to that of the main power wire
connected from the battery to the head unit.
If you have any questions or problems concerning
the connection, consult the dealer for details.
Recommended High-Resolution USB
Audio system
Power amplifier
(e.g. XM-GS4)
RSX-GS9
(this unit)
Power amplifier
(e.g. XM-GS100)
Super tweeter
(e.g. XS-GS1)
Full-range speaker
(e.g. XS-GS1621)
Subwoofer
(e.g. XS-GSW121)
Note
Certain products shown in the diagram may not be
available in your country or region.
35GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 36 Thursday, July 2, 2015 2:07 PM
High level input connection
Installing the microphone
For details on the connection, refer to the manual
supplied with your audio device.
To capture your voice during handsfree calling, you
need to install the microphone ʙ.
ʗ
Left speaker
output
White
White/black striped
Right speaker
output
Gray
ʙ
White
White/black striped
Gray
Clip (not supplied)
Gray/black striped
Gray/black striped
ʙ
Audio device with
speaker outputs
ʚ
Optical connection
ˎ This OPTICAL OUT is designed for connecting a
power amplifier with an optical input. When
another digital device is connected, the functions
of the device may not work properly.
ˎ When making connections, do not bend the
optical cable (not supplied). Doing so may
prevent output of sound.
ˎ When the optical connection is made:
ˋ the volume controls on the unit and the remote
commander do not work.
ˋ [Subwoofer], [Pos Custom], [EQ10 Preset],
[Balance], [Fader] and [DSEE-HX] are
automatically set to [OFF].
ˋ No sound is output while native DSD playback
is performed via the USB micro-B port.
Cautions
ˎ It is extremely dangerous if the cord becomes
wound around the steering column or gearstick.
Be sure to keep it and other parts from interfering
with your driving operations.
ˎ If airbags or any other shock-absorbing
equipment is in your car, contact the store where
you purchased this unit, or the car dealer, before
installation.
Note
Before attaching the double-sided tape ʚ, clean the
surface of the dashboard with a dry cloth.
Power amplifier connection
Stop using the unit and the power amplifier that is
not supported a High-Resolution Audio, when
unusual noise is generated.
Memory hold connection
When the yellow power supply lead is connected,
power will always be supplied to the memory
circuit even when the ignition switch is turned off.
36GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Right
010COV.book Page 37 Thursday, July 2, 2015 2:07 PM
Installation
Mount the unit onto the bracket ʓ, then
attach the protection collar ͨ.
Removing the protection collar and the
bracket
ʓ
Before installing the unit, remove the protection
collar ͨ and the bracket ʓ from the unit.
ͨ
Pinch both edges of the protection collar
ͨ, then pull it out.
ͨ
Notes
ˎ If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
ˎ Make sure the 4 catches on the protection collar ͨ
are properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
Insert both release keys ͧ until they
click, and pull down the bracket ʓ, then
pull up the unit to separate.
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
TOYOTA
ͧ
ʖ
to dashboard/center console
†
ʓ
Bracket
Bracket
Face the hook inwards.
Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket ʓ are bent inwards 2 mm (3/32
in). When mounting in a Japanese car, see
“Mounting the unit in a Japanese car” (page 37).
Position the bracket ʓ inside the
dashboard, then bend the claws outward
for a tight fit.
ʖ
Existing parts supplied with
your car
NISSAN
ʖ
to dashboard/center console
182 mm (7 1/4 in)
Bracket
53 mm (2 1/8 in)
Bracket
Existing parts supplied with
your car
ʓ
ʖ
Catch
37GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Left
010COV.book Page 38 Thursday, July 2, 2015 2:07 PM
Note
To prevent malfunction, install only with the supplied
screws ʖ.
Resetting the unit
For details, see “Resetting the Unit” (page 9).
Fuse replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Fuse (15 A)
Note
Use an appropriate tool to replace a fuse.
38GB
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
masterpage: Blank.R
010COV.book Page 39 Thursday, July 2, 2015 2:07 PM
RSX-GS9
4-577-101-11(1)
E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\050BCO.fm
masterpage: BCO
010COV.book Page 40 Thursday, July 2, 2015 2:07 PM
Support site
Site d’assistance
If you have any questions or for the latest support
information on this product, please visit
the web site below:
Si vous avez des questions ou si vous souhaitez consulter
les toutes dernières informations techniques sur ce
produit, rendez-vous sur le site Web suivant :
http://esupport.sony.com/
If you have any questions/problems
regarding this product, try the following:
Read Troubleshooting in these
Operating Instructions.
Please contact (U.S.A. only);
Call
URL
1-800-222-7669
http://www.SONY.com
http://www.sony.net/
©2015 Sony Corporation
Printed in Thailand
RSX-GS9
4-577-101-11(1)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Sony Corporation
Create Date                     : 2015:07:15 16:19:08+09:00
Modify Date                     : 2015:07:15 16:20:10+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Sony Corporation
Title                           : RSX-GS9
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:07:15 16:20:10+09:00
Trapped                         : False
Producer                        : Acrobat Distiller 11.0 (Windows)
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Version ID                      : 1
Document ID                     : uuid:9ebf3b48-7173-4f5d-b8e5-e9f9554f6b2a
Instance ID                     : uuid:355a2ffe-ad46-48d8-97d7-e1b1be737e46
Page Count                      : 40

EXIF Metadata provided by EXIF.tools