Sony Group UTXB03 UHF SYNTHESIZED WIRELESS MICROPHONE User Manual UWP D11 D12 D16
Sony Corporation UHF SYNTHESIZED WIRELESS MICROPHONE UWP D11 D12 D16
Contents
Users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2177236 |
| Application ID | 3j0BeV28tXzH6Umywfsjhw== |
| Document Description | Users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 112.43kB (1405324 bits) |
| Date Submitted | 2014-01-27 00:00:00 |
| Date Available | 2014-03-28 00:00:00 |
| Creation Date | 2013-12-20 13:12:30 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2013-12-20 14:10:33 |
| Document Title | UWP-D11/D12/D16 |
| Document Creator | FrameMaker 7.1 |
| Document Author: | Sony Corporation |
4-530-735-11 (1) Wireless Microphone Package Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. UWP-D11/D12/D16 © 2014 Sony Corporation Table of Contents Configuration of the Packages ..................3 UWP-D11 ..................................................... 3 UWP-D12 ..................................................... 4 UWP-D16 ..................................................... 5 Features .......................................................6 UWP-D11 ..................................................... 6 UWP-D12 ..................................................... 6 UWP-D16 ..................................................... 6 Name and Function of Parts.......................7 Body-pack transmitter (UTX-B03)............... 7 Hand-held microphone (UTX-M03)............. 8 Plug-on transmitter (UTX-P03).................. 10 Portable diversity tuner (URX-P03) ........... 11 Power Supply.............................................13 Inserting the batteries.................................. 13 Supplying power from a USB connector.... 14 Charging nickel metal hydride batteries ..... 15 Attaching Accessories..............................15 Attaching accessories to the body-pack transmitter (UTX-B03)...................... 15 Attaching accessories to the hand-held microphone (UTX-M03) ................... 16 Attaching accessories to the plug-on transmitter (UTX-P03) ...................... 16 Attaching accessories to the portable diversity tuner (URX-P03) ................ 17 Operation ...................................................18 If noise is generated .................................... 18 Tuner Settings ...........................................19 Menu structure and operation ..................... 19 Setting the receive channel ......................... 20 Searching for available channels within a group (Clear Channel Scan) .............. 20 Searching for active channels within a group (Active Channel Scan) ...................... 21 Adjusting the monitor audio level .............. 21 Configuration menu .................................... 22 Transmitter Settings .................................24 Menu structure and operation ..................... 24 Setting the transmit channel........................ 25 Configuration menu .................................... 26 System Configuration Examples .............29 Error Messages .........................................30 Troubleshooting ........................................31 Table of Contents Important Notes on Use............................ 33 Usage and storage ....................................... 33 Cleaning...................................................... 33 Specifications ............................................ 33 Transmitter (UTX-B03/M03/P03).............. 33 Tuner........................................................... 35 Configuration of the Packages This manual is for the UWP-D11/D12/D16 Wireless Microphone Packages. The contents of each package are described below. Note Some of the packages may not be available in certain countries or areas. For details, consult your Sony dealer. UWP-D11 The package consists of a body-pack transmitter (UTX-B03), a portable diversity tuner (URX-P03), and their accessories. When used in conjunction with a compact camcorder, a mobile system for ENG (Electronic News Gathering) or EFP (Electronic Field Production) applications can be constructed. Body-pack transmitter (UTX-B03) (1) Portable diversity tuner (URX-P03) (1) Supplied accessories Omni-directional lavalier microphone (1) Wind screen (1) Shoe mount adapter (1) XLR-BMP conversion output cable for the URX-P03 (1) Stereo mini plug-BMP conversion cable (1) Holder clip (1) Belt clip (2) Battery case (1) (CN models only) Before Use (1) Quick Start Guide (1) CD-ROM (1) Warranty card (1) (UC and KR models only) Configuration of the Packages UWP-D12 The package consists of a hand-held microphone (UTX-M03), a portable diversity tuner (URX-P03), and their accessories. When used in conjunction with a compact camcorder, a mobile system for ENG (Electronic News Gathering) or EFP (Electronic Field Production) applications can be constructed. Hand-held microphone (UTX-M03) (1) Portable diversity tuner (URX-P03) (1) Supplied accessories Microphone holder (1) XLR-BMP conversion output cable for the URX-P03 (1) Configuration of the Packages Belt clip (1) Stereo mini plug-BMP conversion cable (1) Shoe mount adapter (1) Battery case (1) (CN models only) Before Use (1) Quick Start Guide (1) CD-ROM (1) Warranty card (1) (UC and KR models only) UWP-D16 The UWP-D16 consists of a plug-on transmitter (UTX-P03), a body-pack transmitter (UTX-B03), a portable diversity tuner (URX-P03), and their accessories. When used in conjunction with a compact camcorder, a mobile system for ENG (Electronic News Gathering) or EFP (Electronic Field Production) applications can be constructed. Note The CN model of this package is not available. Plug-on transmitter (UTX-P03) (1) Body-pack transmitter (UTX-B03) (1) Portable diversity tuner (URX-P03) (1) Supplied accessories Omni-directional lavalier microphone (1) Soft case (1) Stereo mini plug-BMP conversion cable (1) Wind screen (1) Shoe mount adapter (1) Holder clip (1) Belt clip (2) XLR-BMP conversion output cable for the URX-P03 (1) Battery case (1) (CN models only) Before Use (1) Quick Start Guide (1) CD-ROM (1) Warranty card (1) (UC and KR models only) Configuration of the Packages Features The UWP-D11/D12/D16 (UWP series) Wireless Microphone Packages comprise a transmitter (body-pack transmitter (UTX-B03), hand-held microphone (UTX-M03), or plug-on transmitter (UTX-P03)) and a receiver (portable diversity tuner (URX-P03)). They can be used for ENG (Electronic News Gathering) in combination with a miniature camcorder. They are equipped with a DSP for transmission of highquality sound using digital compander processing. They can be used in combination with current Sony wireless microphone systems (UWP series, WRT series, WRR series, WRU series) by switching the compander mode. The frequency and compander mode set on the tuner can be sent to the transmitter using an infrared communications link. Used in combination with the Clear Channel Scan function of the tuner, this greatly reduces the time required to set channels. The contents of each package are described below. UWP-D11 Body-pack transmitter (UTX-B03) This transmitter is a lightweight, compact transmitter that employs a crystal-controlled PLL synthesizer. It is equipped with a muting function and a BMP-type microphone input connector. The RF power output can be switched between high and low. It is also equipped with a MIC/LINE input switching function to support a variety of input levels. Portable diversity tuner (URX-P03) This tuner employs a space diversity method featuring little signal dropout and an angle-adjustable antenna. It comes with an adapter for mounting on a compact camcorder (HXR-NX3, etc.). It also features a Clear Channel Scan function to search for available channels automatically. Features UWP-D12 Hand-held microphone (UTX-M03) This microphone features a robust, metallic body. It has a muting function and attenuator adjustment function to support a wide audio input level range. It can be used in diverse applications simply by changing the microphone capsule. It has a built-in antenna. * Microphone unit mounting dimensions: 31.3 mm diameter, 1.0 mm pitch Portable diversity tuner (URX-P03) This tuner employs a space diversity method featuring little signal dropout and an angle-adjustable antenna. It comes with an adapter for mounting on a compact camcorder (HXR-NX3, etc.). It also features a Clear Channel Scan function to search for available channels automatically. UWP-D16 Plug-on transmitter (UTX-P03) This transmitter is a lightweight, compact plug-on type transmitter that employs a crystal-controlled PLL synthesizer. It has a muting function and an XLR-type microphone input connector that can supply +48 V power for connecting a wide range of microphones. It is also equipped with a MIC/LINE switching function to support a variety of input levels. Body-pack transmitter (UTX-B03) This transmitter is a lightweight, compact transmitter that employs a crystal-controlled PLL synthesizer. It is equipped with a muting function and a BMP-type microphone input connector. The RF power output can be switched between high and low. It is also equipped with a MIC/LINE input switching function to support a variety of input levels. Portable diversity tuner (URX-P03) This tuner employs a space diversity method featuring little signal dropout and an angle-adjustable antenna. It comes with an adapter for mounting on a compact camcorder (HXR-NX3, etc.). It also features a Clear Channel Scan function to search for available channels automatically. Name and Function of Parts Body-pack transmitter (UTX-B03) Notes • When the audio input level is set to MIC, a voltage for the lavalier microphone power supply is applied to the audio input connector. Special electrical wiring is used inside the audio input connector for this purpose. • If a lavalier microphone other than the one supplied is connected, the proper performance may not be obtained. e POWER/MUTING button Turns the power on/off. You also use this button to turn the muting function on/off. Function Operation Supply ON Press button for one second or longer Supply OFF Press button until the indicator turns off Muting ON Press button Muting OFF a Antenna b POWER indicator Displays the battery level and charging status. Indicator display Status On (green) Sufficient battery level Flashing (green) Battery is getting low On (orange) Charging (when nickel metal hydride rechargeable batteries are inserted and power is turned off) Off Power is off or battery is empty c AUDIO (audio input level) indicator Turns on or off according to the audio input level as follows. On (red): Audio input level is too high. If the sound is distorted, adjust the attenuation level to decrease the audio input level (page 26). On (green): Audio input level is appropriate. Off: There is no audio input or the input level is too low. Flashing (orange): Audio is muted (i.e., disabled). f USB connector (Micro B type) Connect to a commercially available USB portable power supply. When a USB portable power supply is connected while the power is turned on, the unit automatically operates with power supplied by the USB portable power supply. When a USB portable power supply is connected while nickel metal hydride batteries are inserted and the power is turned off, the batteries are charged by the USB portable power supply. Note Alkaline batteries and lithium batteries cannot be recharged. g Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries). For details on how to insert batteries, see “Power Supply” (page 13). h + or – button Selects functions or values shown on the display. d Audio input connector (BMP type) Connect to the supplied lavalier microphone. Name and Function of Parts i Display section k Infrared detector Receives the frequency and compander mode set on the tuner. Hand-held microphone (UTX-M03) A RF transmission indicator Displays the current transmission status. : Transmitting – : Transmission stopped B RF transmission power indicator Indicates the current transmission power setting. You can change the setting with the RF transmission power setting function. Inside the grip For details on the RF transmission power setting function, see “Setting the transmit output level (RF POWER)” (page 26). C Audio input level meter Displays the the audio input level. D Peak indicator Lights up when the signal is 3 dB below the level at which distortion begins as a warning of excessive input level. E Input level indicator Displays the input level status. : Microphone input : Line input F Battery level indicator Displays the battery level. Displays “EXT” when power is supplied from the USB connector. For details, see “Battery level indicator” (page 14). G Menu display section Displays various functions. Press the + or – button to switch functions. For details, see “Configuration menu” (page 22). j SET button Adjusts displayed function settings and enters the displayed value. Holding down the SET button while turning on the power turns the transmitter on without transmitting a signal (transmission stopped mode). Name and Function of Parts a Microphone unit The standard-equipped microphone unit can be interchanged with another microphone unit having a diameter of 31.3 mm and a pitch of 1.0 mm. For details on attaching and removing the microphone unit, see “Replacing the microphone unit” (page 16). b POWER indicator Displays the battery level, charging status, and audio muting (i.e., audio enabled or disabled) status. Indicator display Status On (green) Sufficient battery level Flashing (green) Battery is getting low On (orange) Charging (when nickel metal hydride rechargeable batteries are inserted and power is turned off) Off Power is off or battery is empty Flashing (orange) Audio is muted (i.e., disabled) c POWER/MUTING button Turns the power on/off. You also use this button to turn the muting function on/off. E Battery level indicator Displays the battery level. For details, see “Battery level indicator” (page 14). Function Operation Supply ON Press button for one second or longer Supply OFF Press button until the indicator turns off Muting ON Press button Muting OFF F Menu display section Displays various functions. Press the + or – button to switch functions. For details, see “Configuration menu” (page 22). d Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries). g Infrared detector Receives the frequency and compander mode set on the tuner. For details on how to insert batteries, see “Power Supply” (page 13). h SET button Adjusts displayed function settings and enters the displayed value. Holding down the SET button while turning on the power turns the transmitter on without transmitting a signal (transmission stopped mode). e Antenna section f Display section i USB connector (Micro B type) Connect to a commercially available USB portable power supply. When a USB portable power supply is connected while nickel metal hydride batteries are inserted and the power is turned off, the batteries are charged by the USB portable power supply. Note A RF transmission indicator Displays the current transmission status. : Transmitting – : Transmission stopped Alkaline batteries and lithium batteries cannot be recharged. Also, power cannot be supplied from a USB portable power supply. j + or – button Selects functions or values shown on the display. B RF transmission power indicator Indicates the current transmission power setting. You can change the setting with the RF transmission power setting function. For details on the RF transmission power setting function, see “Setting the transmit output level (RF POWER)” (page 26). C Audio input level meter Displays the the audio input level. D Peak indicator Lights up when the signal is 3 dB below the level at which distortion begins as a warning of excessive input level. Name and Function of Parts Plug-on transmitter (UTX-P03) Flashing (orange): Audio is muted (i.e., disabled). e POWER/MUTING button Turns the power on/off. You also use this button to turn the muting function on/off. Front Function Operation Supply ON Press button for one second or longer Supply OFF Press button until the indicator turns off Muting ON Press button Muting OFF f Display section Bottom A RF transmission indicator Displays the current transmission status. : Transmitting – : Transmission stopped a Audio input connector (XLR type) Connect to a microphone or the line output of an audio mixer or other device. b +48V (+48 V supply) indicator Lights up when the unit is set to LINE input and is supplying power to the connected microphone. c POWER indicator Displays the battery level and charging status. B RF transmission power indicator Indicates the current transmission power setting. You can change the setting with the RF transmission power setting function. For details on the RF transmission power setting function, see “Setting the transmit output level (RF POWER)” (page 26). C Audio input level meter Displays the the audio input level. Indicator display Status On (green) Sufficient battery level Flashing (green) Battery is getting low On (orange) Charging (when nickel metal hydride rechargeable batteries are inserted and power is turned off) Off Power is off or battery is empty d AUDIO (audio input level) indicator Turns on or off according to the audio input level as follows. On (red): Audio input level is too high. If the sound is distorted, adjust the attenuation level to decrease the audio input level (page 26). On (green): Audio input level is appropriate. Off: There is no audio input or input level is too low. 10 Name and Function of Parts D Peak indicator Lights up when the signal is 3 dB below the level at which distortion begins as a warning of excessive input level. E Input level indicator Displays the input level status. : Microphone input : Line input F Battery level indicator Displays the battery level. Displays “EXT” when power is supplied from the USB connector. For details, see “Battery level indicator” (page 14). G Menu display section Displays various functions. Press the + or – button to switch functions. Portable diversity tuner (URX-P03) Front For details, see “Configuration menu” (page 22). g + or – button Selects functions or values shown on the display. h SET button Adjusts displayed function settings and enters the displayed value. Holding down the SET button while turning on the power turns the transmitter on without sending a signal (transmission stopped mode). i Infrared detector Receives the frequency and compander mode set on the tuner. j USB connector (Micro B type) Connect to a commercially available USB portable power supply. When a USB portable power supply is connected while the power is turned on, the unit automatically operates with power supplied by the USB portable power supply. When a USB portable power supply is connected while nickel metal hydride batteries are inserted and the power is turned off, the batteries are charged by the USB portable power supply. Note Alkaline batteries and lithium batteries cannot be recharged. k Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries). For details on how to insert batteries, see “Power Supply” (page 13). Bottom a Antenna b PHONES (monitor) connector (3.5-mm diameter, stereo mini jack) Connect to headphones to monitor the audio output. Note Do not connect headphones with a monaural mini jack. This may short-circuit the headphone outputs, resulting in distorted sound output. c POWER indicator Displays the battery level and charging status. Indicator display Status On (green) Sufficient battery level Flashing (green) Battery is getting low On (orange) Charging (when nickel metal hydride rechargeable batteries are inserted and power is turned off) Off Power is off or battery is empty Name and Function of Parts 11 d RF (radio frequency input) indicator Displays the RF input level using the following colors. On (green): Input level is 25 dBμ or more. On (red): Input level is 15 to 25 dBμ. Off: Input level is 15 dBμ or lower. i SET button Adjusts displayed function settings and enters the displayed value. Holding down the SET button while turning on the power turns the transmitter on without sending a signal (transmission stopped mode). * 0 dBμ = 1 μVEMF e Infrared transmitter port Sends the set frequency and compander mode to the transmitter. f + or – button Selects functions or values shown on the display. g Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries). For details on how to insert batteries, see “Power Supply” (page 13). h Display section j POWER button Turns the power on/off. Function Operation Supply ON Press button for one second or longer Supply OFF Press button until the indicator turns off k OUTPUT (audio output) connector (3.5-mm diameter, stereo mini jack) Connect one end of the supplied XLR-BMP conversion output cable for the URX-P03 or the stereo mini plugBMP conversion cable here and the other end to the microphone input on a camcorder, mixer, or amplifier. If the microphone input connector on the connected device is a stereo mini jack, connect the straight (BMP) plug to the tuner and the L-shaped (stereo mini) plug to the microphone input connector on the device. Note To prevent damaging the tuner, do not apply a voltage to this connector from a microphone external power supply or other source. A Audio input level meter Displays the the audio input level. B Peak indicator Lights up when the signal is 3 dB below the level at which distortion begins as a warning of excessive input level. C Battery level indicator Displays the battery level. Displays “EXT” when power is supplied from the USB connector. For details, see “Battery level indicator” (page 14). D RF level (reception level) indicator Indicates the current reception level. E Menu display section Displays various functions. Press the + or – button to switch functions. For details, see “Configuration menu” (page 22). 12 Name and Function of Parts l USB connector (Micro B type) Connect to a commercially available USB portable power supply. When the power is turned on, the unit operates with power supplied by the USB portable power supply. When nickel metal hydride batteries are inserted and the power is turned off, the battery is charged by the USB portable power supply. Note Alkaline batteries and lithium batteries cannot be recharged. m Auxiliary connector Used to connect external accessories. Power Supply Inserting the batteries Notes This section describes the power supply of each device and the charging of nickel metal hydride batteries. Body-pack transmitter (UTX-B03) and plug-on transmitter (UTX-P03) The unit operates using power supplied from two AA batteries (alkaline, nickel metal hydride, or lithium batteries) or from a supply connected to the USB connector. If power is supplied simultaneously from batteries and from a supply connected to the USB connector, power from the USB connector has precedence. For details about inserting batteries in each device and displaying the battery level, or supplying power from a supply connected to the USB connector, see the following sections. Hand-held microphone (UTX-M03) The unit operates from two AA batteries (alkaline, nickel metal hydride, or lithium batteries). For details about inserting batteries and displaying the battery level, see the following sections. Portable diversity tuner (URX-P03) The unit operates from two AA batteries (alkaline, nickel metal hydride, or lithium batteries), power supplied from a supply connected to the USB connector, or power supplied from the auxiliary connector. The power supply that has precedence when both AA battery power and an external power supply via the USB connector or auxiliary connector are available can be specified using the POWER SEL (external power selection) function. Under the factory default setting, the power supplied from inserted AA batteries has precedence. For details about inserting batteries and displaying the battery level, or supplying power from supply connected to the USB connector, see the following sections. • Always use sets of the same type of battery. Do not use batteries of different types or batteries with different charge level together. • Replacing the batteries during operation may generate a large noise. Be sure to turn off the unit before replacing the batteries. Body-pack transmitter (UTX-B03) / plugon transmitter (UTX-P03) / portable diversity tuner (URX-P03) The following describes the procedure using illustrations for the body-pack transmitter (UTX-B03). Batteries can be inserted in the plug-on transmitter (UTX-P03) and portable diversity tuner (URX-P03) in the same manner. Press and hold the POWER/MUTING button to turn the power off. Slide the two catches inward (as indicated) and pull the battery compartment out. Insert two new AA batteries into the battery compartment with 3 and # polarities in the correct orientation, and close the the compartment. For details on the POWER SEL function setting, see “Selecting the preferred power supply (POWER SEL)” (page 23). Note The use of manganese batteries will result in poor performance. Do not use manganese batteries. Make sure that the battery compartment is locked securely. Power Supply 13 Hand-held microphone (UTX-M03) Press and hold the POWER/MUTING button to turn the power off. Turn the grip in the direction of the arrow, and pull the grip down until the battery compartment is visible. Notes • When BATTERY is set to TYPE1, the battery level is indicated based on the use of new LR6 (size AA) Sony alkaline batteries. The battery level may not be displayed correctly when different kinds of batteries, different brand of batteries, or old batteries are used. If using batteries other than size AA alkaline batteries, select the battery type using the BATTERY function. • If you plan to use the transmitter continuously for a long period of time, it is recommended that you replace the batteries with brand new ones. For details on the BATTERY function setting, see “Setting the battery type (BATTERY)” (page 23). Insert two new AA batteries into the battery compartment with 3 and # polarities in the correct orientation. Close the grip, turning it in the reverse direction of step 2. Battery level indicator Press and hold the POWER button for 1 second or longer to display the battery level on the display. Immediately replace both batteries with new batteries if the indicator starts flashing (indication 5 below). If using new alkaline batteries, use after checking the recommended time limits. Battery precautions Batteries may leak or explode if mistreated. Be sure to follow these instructions. • Insert batteries in the correct 3 and # polarity orientation. • Always replace the two batteries together with new ones. • Do not use different types of batteries or old and new ones together. • Dry cells are not rechargeable. • When not using the device for a long period of time, remove the batteries. If the batteries leak for any reason, consult your Sony service representative. Supplying power from a USB connector 1 Lights Good The transmitter (UTX-B03/P03) and tuner (URX-P03) can operate from a commercially available portable power supply (with USB output function) connected to the USB connector. Use a portable power supply that satisfies the following conditions. • Output connector: USB micro B type • Rated voltage: 5 V • Output current: 200 mA or higher 2 Lights Less than 70% charge remaining Displays “EXT” when power is supplied from the USB connector. 3 Lights Less than 40% charge remaining 4 Lights Less than 20% charge remaining 5 Flashes Almost empty Battery level indicator Battery status Note 14 Power Supply The UTX-M03 hand-held microphone cannot be supplied using a USB connector. Charging nickel metal hydride batteries You can charge nickel metal hydride batteries inserted in the transmitter (UTX-B03/M03/P03) and tuner (URX-P03). When charging nickel metal hydride batteries, turn the power off and connect a commercially available portable power supply (with USB output function) to the USB connector. The POWER indicator is lit orange while charging batteries. When charging is finished, the POWER indicator goes off. Attaching Accessories This section describes how to attach the supplied accessories to each device. Attaching accessories to the bodypack transmitter (UTX-B03) Connecting the microphone Microphone (supplied) For a secure connection, turn to lock the connector. Note Be sure to attach or remove the microphone after turning off the transmitter. Attaching the holder clip to the microphone Push the end of the microphone holder to expand the ring opening (1), and insert the microphone (2). Align the groove on the base of the microphone with the ring, then release the clip to secure the microphone. To secure the microphone cable Insert the microphone cable through the clamp of the holder clip. Attaching Accessories 15 Attaching the wind screen to the microphone Attaching accessories to the handheld microphone (UTX-M03) Attaching the microphone holder Align and insert the microphone into the hole in the wind screen. Insert the base of the microphone into the holder. Attaching a belt clip Replacing the microphone unit Removing the microphone unit Insert one end of the belt clip into one of two holes on either side of the transmitter, and then insert the other end into the hole on the other side. Turn the microphone unit in the direction of the arrow. Attaching the microphone unit Turn the microphone unit in the opposite direction from when you removed it, and make sure that the unit is securely attached to the microphone. To remove a belt clip Insert a pointed object, such as a ball-point pen, between the belt clip and the transmitter, and pry the end of the belt clip from the hole on the side of the transmitter. Attaching accessories to the plugon transmitter (UTX-P03) Attaching a microphone or cable Microphone or cable connector Push the microphone or cable connector (XLR-3-12C connector) into the audio input connector of the UTX-P03 until it clicks into place. 16 Attaching Accessories Disconnecting a microphone or cable Microphone or cable connector Release button Attaching the shoe mount adapter Attach the belt clip before attaching the shoe mount adapter (page 16). Note Attach belt clips upside-down if planning to attach the shoe mount adapter. Press the release button and pull the microphone or cable out slowly. Attaching accessories to the portable diversity tuner (URX-P03) Connecting the conversion cable to the OUTPUT connector Example: XLR-BMP conversion output cable for the URX-P03 For a secure connection, turn to lock the connector. Attaching a belt clip Push the bottom of the belt clip to make some space between the belt clip and the tuner (1), align the belt clip with the two vertical grooves on the shoe mount adapter, and insert the adapter in the direction of the arrow (2). Push the shoe mount adapter in fully until the belt clip fits into the horizontal groove on the adapter holds. See “Attaching a belt clip” (page 16). Note If attaching a camcorder, bend the URX-P03 antenna down so that the antenna is not reflected on the display. To remove the shoe mount adapter ÅuPush and hold the part labeled “PUSH” on the shoe mount adapter 1, and disengage the horizontal part of the belt clip from the horizontal groove on the shoe mount adapter (2). Then, push the shoe mount adapter in the direction of the arrow (3). Attaching Accessories 17 7 Operation Information about the channel set on the tuner is sent to the transmitter, and a prompt appears on the transmitter display asking if you want to change to that frequency. Procedure for UWP series devices (UTX-B03/ M03/P03 and URX-P03) Place the infrared transmitter port on the tuner near the infrared detector on the transmitter. Connect the tuner as required. For details about example connections, see “System Configuration Examples” (page 29). Press and hold the POWER button for at least one second on the tuner to turn the power on. Use the + or – button to display the AUTO SET screen on the tuner. Use the + or – button to select YES, then press the SET button on the transmitter. This sets the transmit channel. Notes Press and hold the SET button on the tuner for at least one second. “YES” flashes on the display. • The infrared transmission from the tuner in step 5 continues for about ten seconds. Perform steps 6 and 7 within those ten seconds. If ten seconds have elapsed, you can reestablish the infrared link using the SYNC menu on the tuner. • Place the tuner and transmitter within about 20 cm (8 in.) of each other. • If five seconds elapse without any user input after the prompt appears on the transmitter display, the transmitter returns to its previous state without changing the frequency. • Communications using the infrared link may be adversely affected, depending on the surrounding environment. If this occurs, use the SYNC menu on the tuner to reestablish the link. If noise is generated Press the SET button on the tuner. Clear Channel Scan starts searching for an available channel. When Clear Channel Scan finishes, the channel with the least noise and interference will be set. When the channel is set, infrared transmission starts automatically. Depending on the environment where the devices are installed, external noise or radio waves may disrupt transmission on certain channels. When selecting a channel under these circumstances, turn off the transmitter. Then, on the tuner, select a channel for which the RF indicator does not light up (i.e., a channel free from noise or radio wave interference). Set the same channel on the transmitter. Note Some noise may occur when power is turned on. Accordingly, turn down the audio input level of devices connected to the tuner when turning the power on. 18 Press and hold the SET button on the transmitter and press the POWER/MUTING button to turn the power on. Operation Notes To prevent interference or noise, take the following precautions. • Do not use two or more transmitters on the same channels. • When operating two or more UWP series packages simultaneously, set each package to a different channel within the same channel group. • Keep the antennas on the tuner and transmitter separated by at least 3 meters (about 10 feet). • When operating two or more UWP series packages simultaneously with different channel groups, make sure that they are at least 100 meters (330 feet) apart if they are used within clear sight of each other (actual distance may vary depending on the circumstances). Tuner Settings Menu structure and operation Procedure for portable diversity tuner (URX-P03) There are two menu display modes that can be selected according to the application. Simple mode This mode displays only the required settings for the tuner and audio output. You can enable simple mode by setting MENU MODE (menu display mode) to SIMPLE. Configuration menus • GP/CH (group/channel) select • PHONES (monitor audio) setting • AUTO SET (auto channel setting) function • BAND (frequency band) select • CLR SCAN (clear channel scan) function • OUT LEVEL (audio output level) setting • SYNC (infrared transmitter) function • TIME (accumulated running time) display • MENU MODE (menu display mode) setting Extended mode This mode displays all configuration menus. You can enable extended mode by setting MENU MODE (menu display mode) to ADVANCED. Note The existing settings configured in extended mode are active even when using simple mode. Configuration menus • GP/CH (group/channel) select • PHONES (monitor audio) setting • AUTO SET (auto channel setting) function • BAND (frequency band) select • CLR SCAN (clear channel scan) function • OUT LEVEL (audio output level) setting • SYNC (infrared transmitter) function • TIME (accumulated running time) display • MENU MODE (menu display mode) setting • COMPANDER (compander mode) setting • POWER SEL (external power selection) setting • ACT SCAN (active channel scan) function • PWR LOCK (POWER button lock) function • BATTERY (battery type) setting • CONTRAST (display text contrast) setting • RESET (factory default setting) function • VERSION (software version) display Tuner Settings 19 Basic menu operation The basic menu operation is the same in simple mode and extended mode. Use the + or – button to select the desired group name, then press the SET button. The channel group is set, and the channel number display starts flashing. Function name Setting Press the + or – button to display the function to be set. Press and hold the SET button until the setting starts flashing. Press the + or – button to change the setting. Press the SET button to enter the setting. Notes • If no operation is performed for ten seconds on a function menu other than GP/CH, the display will automatically return to the GP/CH screen. • If no operation is performed for seven seconds, the backlight will turn off. Pressing any button will turn the backlight on again. Setting the receive channel Procedure for portable diversity tuner (URX-P03) For details about the channel groups and channels that can be selected, refer to the “Frequency List” on the CD-ROM. Use the + or – button to display the GP/CH menu. Press and hold the SET button for one second or longer. Use the + or – button to select the desired channel number, then press the SET button. The displays stops flashing and the desired channel is set. Notes • If there is no user input within ten seconds after the channel group display or channel number display starts flashing, the display returns to the existing setting. The same applies when setting other parameters. • The frequency indicator changes in response to the channel number. • The tuner continues to receive, even when setting the receive channel. • Do not remove the batteries while setting the receive channel. If they are removed, re-insert them and repeat the procedure from the beginning. • Make sure that the same channel is set on the transmitter and tuner within the same system. Searching for available channels within a group (Clear Channel Scan) Procedure for portable diversity tuner (URX-P03) You can search for available channels within the specified channel group. Before performing this procedure, select the channel group. For details, see “Setting the receive channel” (page 20). Use the + or – button to display the CLR SCAN menu. Press and hold the SET button for one second or longer. The channel group display starts flashing. Press and hold until the channel group and “+” display starts flashing. 20 Tuner Settings 2 Press and hold the SET button for one second or longer. Press and hold until the channel group and “+” display starts flashing. Press the + button. The tuner starts to scan through the selected channel group. When available channels are found, the first channel number among the available channels starts flashing on the display. To display the next available channel number The tuner starts to scan for active channels in the selected channel group. When active channels are found, the first channel number among the active channels starts flashing on the display. Press the + button. To cancel searching Press the – button. The display returns to the CLR SCAN menu. To display the next active channel number Press the + button. Press the SET button when the desired channel number starts flashing. The search for available channels finishes and the displayed channel is set. The channel setting is transmitted from the infrared transmission port for about ten seconds after setting the channel. During this interval, place the infrared detector on the transmitter (with the power turned on) near the tuner to transfer the channel setting from the tuner to the transmitter. To scan channels automatically when power is turned on With the tuner power off, press and hold the SET button and press the POWER button for at least one second to turn the power on and to automatically start a clear channel scan. To cancel searching Press the – button. The display returns to the ACT SCAN menu. Adjusting the monitor audio level Procedure for portable diversity tuner (URX-P03) You can set the monitor audio level within the range 1 to 16. Use the + or – button to display the ACT SCAN menu. Use the + or – button to display the PHONES menu. The current monitor audio level is displayed. Press and hold the SET button for at least one second. Press and hold until the monitor audio level flashes. For details, see “Setting the receive channel” (page 20). Press the SET button when the desired channel number starts flashing. The search for active channels finishes and the displayed channel is set. Searching for active channels within a group (Active Channel Scan) Procedure for portable diversity tuner (URX-P03) You can search for channels in use within the specified channel group. This is useful when using more than one tuner in combination with a single transmitter. Before performing this procedure, select the channel group. Press the + button. Use the + or - button to set the desired monitor audio level, then press the SET button. The setting value is stored. The setting is retained even after the power is turned off. Tuner Settings 21 Configuration menu Procedure for portable diversity tuner (URX-P03) This section describes each function and configurable items. Underlined entries are factory default values. Selecting group/channel (GP/CH) The factory default setting varies depending on the model. For details, see “Setting the receive channel” (page 20). Adjusting the monitor audio level (PHONES) Note The monitor output level does not change when you change the output level in the OUT LEVEL menu. The monitor output level is adjusted separately. For details about adjusting the monitor audio level, see “Adjusting the monitor audio level” (page 21). Using infrared transmission (SYNC) Transfers the frequency and compander mode set on the tuner to a transmitter using an infrared transmitter. Use the + or – button to display the SYNC menu. Press and hold the SET button for one second or longer. Adjusts the monitor audio level for the headphones. For details, see “Adjusting the monitor audio level” (page 21). Setting an available channel automatically (AUTO SET) A confirmation screen appears. Use the + or – button to display “YES.” Turn the transmitter power on, and place the infrared transmitter port on the tuner near the infrared detector on the transmitter. Automatically searches for and sets an available channel, and starts infrared transmission to the transmitter. For details, see “Operation” (page 18). Selecting the frequency band (BAND) Selects the receive frequency band. A prompt appears on the transmitter display asking you whether to change the frequency. Use the + or – button on the transmitter to select YES. Press the SET button on the transmitter. The frequency and compander mode for use on the transmitter are set. Note Frequency bands may not be selectable, depending on the model. Frequency bands will not be displayed on such models. For details about the groups and channels in each frequency band, refer to the “Frequency List” on the CD-ROM. Searching for and selecting available channels (CLR SCAN) Searches for available channels. Notes • When using the infrared link, place the tuner and transmitter within about 20 cm (8 in.) of each other. • After the infrared transmission starts, place the tuner near the transmitter within ten seconds. After ten seconds have elapsed, the infrared transmission finishes and the display returns to the previous menu. • After the prompt appears on the transmitter, you can select NO or do nothing for about five seconds to return to the previous menu screen automatically, and the information received over the infrared link is discarded. For details, see “Searching for available channels within a group (Clear Channel Scan)” (page 20). Displaying the accumulated running time (TIME) Setting the audio output level (OUT LEVEL) Displays the accumulated running time of the tuner as a guide to total usage time. The factory default setting is 00:00. Up to 99:99 can be displayed. Sets the audio output level. You can set the level in 3 dB increments in the range –12 dB to +12 dB. The factory default setting is 0 dB. To reset the time display 22 Tuner Settings Press and hold the SET button until the time display starts flashing. 2 Press the – button to display “00:00 CLR” and press the SET button. Pressing the + button when “00:00 CLR” is displayed causes the time display to start flashing. You can press the SET button in this state to cancel the reset of the accumulated running time. Setting the menu display mode (MENU MODE) Sets the menu display mode. SIMPLE: Displays only the required settings. ADVANCED: Displays all settings. Setting the compander mode (COMPANDER) Sets the operating mode of the compander. UWP-D: High speech quality mode supported in combination with UWP-D series devices. UWP: Mode supported in combination with Sony UWPseries transmitters. WL800: Mode supported in combination with Sony 800series transmitters. Notes • This function is displayed in extended mode only. • The correct speech quality may not be achieved or audio may not be output at all if using a combination of devices with different compander mode settings. Selecting the preferred power supply (POWER SEL) Specifies whether the power supply from the batteries inserted in the unit or from an external USB portable power supply or accessory connected to the USB connector or auxiliary connector has precedence. BATTERY: Batteries inserted in the unit have precedence. EXTERNAL: Power supplies from externally connected sources have precedence. Note This function is displayed in extended mode only. For details, see “Searching for active channels within a group (Active Channel Scan)” (page 21). Locking the POWER button (PWR LOCK) You can lock the POWER button to prevent the power being turned off inadvertently during reception. UNLOCK: Press and hold the POWER button to turn the power on/off. LOCK: The power does not turn off, even after pressing the POWER button. To release the lock state To release the lock state, either set the PWR LOCK menu to UNLOCK or use the following procedure. When the button is in the LOCK state, press and hold the POWER button. A prompt appears asking you whether to release the lock state. Use the + or – button to select YES, then press the SET button. The lock state is released. Notes • This function is displayed in extended mode only. • The POWER button lock state does not change after switching to simple mode after setting the button to LOCK in extended mode. • If the batteries are removed and reinserted while the POWER button is set to LOCK, the power will turn on automatically but the lock state of the POWER button does not change. Setting the battery type (BATTERY) You can set the type of battery being used in order to provide a more accurate battery level indication. Notes • When power from the preferred source is cut off, the power supply automatically switches to the other source. • When only one power supply is available, that power supply will be used regardless of the POWER SEL setting. Setting the frequency to an active channel (ACT SCAN) Searches for channels already in use. This is useful when using more than one tuner in combination with a single transmitter. TYPE1: Recommended setting when using alkaline LR6 (size AA) batteries. Indicates the battery level based on the characteristics of new Sony alkaline LR6 (size AA) batteries. TYPE2: Recommended setting when using rechargeable nickel metal hydride batteries. TYPE3: Recommended setting when using lithium batteries. Notes • This function is displayed in extended mode only. • The characteristics of batteries change according to battery type and environmental conditions. It is recommended that you understand the characteristics of batteries before using them. Tuner Settings 23 Setting the display contrast (CONTRAST) You can adjust the contrast of text and icons on the display in the range 1 to 10. The configurable values are given below. (Light) 1 2 3 4 5 6 7 8 9 10 (Dark) Note This function is displayed in extended mode only. Restoring factory default settings (RESET) Restores all parameters to their factory default settings. Press and hold the SET button. A prompt appears asking you whether to restore factory default settings. Press the + or – button to select YES, then press the SET button. The tuner parameters are restored to their factory default settings. Notes • This function is displayed in extended mode only. • After a reset, the audio output level and monitor output level are also restored to their factory default settings. Note that this may cause the volume on connected devices and in headphones to suddenly change. Displaying the software version (VERSION) Transmitter Settings Menu structure and operation Procedure for all transmitters (UTX-B03/M03/ P03) There are three menu display modes that can be selected according to the application. Simple mode This mode displays only the required settings for transmitting audio. You can enable simple mode by setting MENU MODE (menu display mode) to SIMPLE. Configuration menus • GP/CH (group/channel) select • BAND (frequency band) select • RF POWER (RF transmit output level) select (UTX-B03/M03 only) • ATT (attenuator) setting • LCF (low-cut filter) setting • IN LEVEL (audio input level) select (UTX-B03/P03 only) • +48V (+48 V supply) setting (UTX-P03 only) • TIME (accumulated running time) display • MENU MODE (menu display mode) setting Displays the software version of the tuner. Notes Note This function is displayed in extended mode only. The following configuration menus cannot be modified during transmission. Set these menus in transmission stopped mode. • GP/CH (group/channel) select The following configuration menus do not appear and cannot be modified during transmission. Set these menus in transmission stopped mode. • BAND (frequency band) select • RF POWER (RF transmit output level) select (UTX-B03/M03 only) Extended mode This mode displays all configuration menus. You can enable extended mode by setting MENU MODE (menu display mode) to ADVANCED. Note The existing settings configured in extended mode are active even when using simple mode. Configuration menus • GP/CH (group/channel) select • BAND (frequency band) select • RF POWER (RF transmit output level) select (UTX-B03/M03 only) • ATT (attenuator) setting • LCF (low-cut filter) setting 24 Transmitter Settings • IN LEVEL (audio input level) select (UTX-B03/P03 only) • +48V (+48 V supply) setting (UTX-P03 only) • TIME (accumulated running time) display • MENU MODE (menu display mode) setting • COMPANDER (compander mode) setting • PWR LOCK (POWER button lock) function • MUTING (muting function) setting • PHASE (phase switching) setting (UTX-B03 only) • BATTERY (battery type) setting • CONTRAST (display text contrast) setting • RESET (factory default setting) function • VERSION (software version) display Note The following configuration menus cannot be modified during transmission. Set these menus in transmission stopped mode. • GP/CH (group/channel) select The following configuration menus do not appear and cannot be modified during transmission. Set these menus in transmission stopped mode. • BAND (frequency band) select • RF POWER (RF transmit output level) select (UTX-B03/M03 only) • RESET (factory default setting) function Transmission stopped mode This mode allows settings to be modified when RF transmission has stopped. Use this mode to make settings without risk of interrupting other wireless traffic when setting channels and other settings. With the power off, press and hold the SET button and press the POWER/MUTING button for at least one second to turn the power on and to display the transmission stopped mode menu. The following configuration menus can only be modified in transmission stopped mode. • GP/CH (group/channel) select • BAND (frequency band) select • RF POWER (RF transmit output level) select (UTX-B03/M03 only) • RESET (factory default setting) function Basic menu operation The basic menu operation is the same in simple mode, extended mode, and transmission stopped mode. Press the + or – button to display the function to be set. Press and hold the SET button until the setting starts flashing. Press the + or – button to change the setting. Press the SET button to enter the setting. Notes • If no operation is performed for ten seconds on a function menu other than GP/CH, the display will automatically return to the GP/CH screen. • If no operation is performed for seven seconds, the backlight will turn off. Pressing any button will turn the backlight on again. Setting the transmit channel Procedure for all transmitters (UTX-B03/M03/ P03) For details about the channel groups and channels that can be selected, refer to the “Frequency List” on the CD-ROM. Press and hold the SET button and press the POWER/ MUTING button to turn the power on. Use the + or – button to display the GP/CH menu. Press and hold the SET button for one second or longer. Press and hold until the channel group display starts flashing. Use the + or – button to select the desired group name, then press the SET button. The channel group is set, and the channel number display starts flashing. Function name Setting Transmitter Settings 25 5 Use the + or – button to select the desired channel number, then press the SET button. The displays stops flashing and the desired channel is set. Notes • If there is no user input within ten seconds after the channel group display or channel number display starts flashing, the display returns to the existing setting. The same applies when setting other parameters. • The frequency indicator changes in response to the channel number. • Do not remove the batteries while making settings. If they are removed, re-insert them and repeat the procedure from the beginning. • Make sure that the same channel is set on the transmitter and tuner within the same system. Note This function can be modified in transmission stopped mode only. Adjusting the audio input attenuation level (ATT) You can set the audio input attenuation level in 3 dB increments to reduce noise distortion. The factory default setting is 0 dB. Notes • On the UTX-B03/P03, “---” is displayed if IN LEVEL is set to LINE, and the attenuation level cannot be modified (fixed at 0 dB). • If the attenuation level is set too high, the noise level may increase. Set the level as close as possible to 0 dB if using a lavalier microphone attached to your torso. Configuration menu Procedure for all transmitters (UTX-B03/M03/ P03) This section describes each function and configurable items. Underlined entries indicate factory default settings. Selecting group/channel (GP/CH) The factory default setting varies depending on the model. For details, see “Setting the transmit channel” (page 25). Note This function can be modified in transmission stopped mode only. Selecting the frequency band (BAND) Selects the transmit frequency band. Notes • This function can be modified in transmission stopped mode only. • Frequency bands may not be selectable, depending on the model. Frequency bands will not be displayed on such models. For details about the groups and channels in each frequency band, refer to the “Frequency List” on the CD-ROM. Setting the transmit output level (RF POWER) (UTX-B03/M03 only) Set the transmitted RF power to HIGH or LOW. The transmit power level varies depending on the model. 26 Transmitter Settings Setting the low-cut filter (LCF) You can set the low-cut filter to reduce noise caused by wind. You can set the cutoff frequency to OFF/LOW/MID/ HIGH. OFF: No filtering LOW: 100 Hz cutoff frequency MID: 150 Hz cutoff frequency HIGH: 200 Hz cutoff frequency Switching the audio input level (IN LEVEL) (UTX-B03/P03 only) Sets the input level according to the audio input device. You can switch between MIC and LINE. The factory default setting is MIC. Note Do not switch this function to “MIC” when the audio input source is an audio mixer or other line level device. If an excessive audio level is input, it may cause noise distortion or damage the playback/recording equipment. Setting the microphone drive power supply (+48V) (UTX-P03 only) You can supply power from the transmitter when using a microphone that requires an external power supply. When set to ON, power is supplied to the connected microphone and the +48 V indicator starts flashing. The factory default setting is OFF. Displaying the accumulated running time (TIME) Displays the accumulated running time of the transmitter as a guide to total usage time. The factory default setting is 00:00. Up to 99:99 can be displayed. To reset the time display Press and hold the SET button until the time display starts flashing. Press the – button to display “00:00 CLR” and press the SET button. Pressing the + button when “00:00 CLR” is displayed causes the time display to start flashing. You can press the SET button in this state to cancel the reset of the accumulated running time. Notes • This function is displayed in extended mode only. • The POWER/MUTING button lock state does not change after switching to simple mode after setting the button to LOCK in extended mode. • If the batteries are removed and reinserted while the POWER/MUTING button is set to LOCK, the power will turn on automatically but the lock state of the POWER/MUTING button does not change. Muting the output (MUTING) Setting the menu display mode (MENU MODE) Sets the menu display mode. SIMPLE: Displays only the required settings. ADVANCED: Displays all settings. Setting the compander mode (COMPANDER) Sets the operating mode of the compander. UWP-D: High speech quality mode supported in combination with UWP-D series devices. UWP: Mode supported in combination with Sony UWPseries transmitters. WL800: Mode supported in combination with Sony 800series transmitters. Notes • This function is displayed in extended mode only. • The correct speech quality may not be achieved or audio may not be output at all if using a combination of devices with different compander mode settings. Locking the POWER/MUTING button (PWR LOCK) You can lock the POWER/MUTING button to prevent the power being turned off inadvertently during transmission. UNLOCK: Press and hold the POWER/MUTING button to turn the power on/off. LOCK: The power does not turn off, even after pressing the POWER/MUTING button. To release the lock state To release the lock state, either set the PWR LOCK menu to UNLOCK or use the following procedure. When the button is in the LOCK state, press and hold the POWER/MUTING button. A prompt appears asking you whether to release the lock state. Use the + or – button to select YES, then press the SET button. The lock state is released. Pressing the POWER/MUTING button while transmitting mutes the audio so that audio from the tuner is not output. Pressing the POWER/MUTING button again restores the audio output. ENABLE: Pressing the POWER/MUTING button mutes the output. DISABLE: The output is not muted even when the POWER/MUTING button is pressed. Notes • This function is displayed in extended mode only. • In muting, the audio signal is not output but an RF signal is still transmitted. Switching the phase of the microphone (PHASE) (UTX-B03 only) You can switch the phase of a connected microphone (excluding the supplied lavalier microphone) to output audio in reverse phase. NORMAL: Phase is not reversed. Set to NORMAL when the supplied lavalier microphone is connected. INVERT: Reverses the phase within the transmitter. Note This function is displayed in extended mode only. Setting the battery type (BATTERY) You can set the type of battery being used in order to provide a more accurate battery level indication. TYPE1: Recommended setting when using alkaline LR6 (size AA) batteries. Indicates the battery level based on the characteristics of new Sony alkaline LR6 (size AA) batteries. TYPE2: Recommended setting when using rechargeable nickel metal hydride batteries. TYPE3: Recommended setting when using lithium batteries. Notes • This function is displayed in extended mode only. • The characteristics of batteries change according to battery type and environmental conditions. It is recommended that you understand the characteristics of batteries before using them. Transmitter Settings 27 Setting the display contrast (CONTRAST) You can adjust the contrast of text and icons on the display in the range 1 to 10. The configurable values are given below. (Light) 1 2 3 4 5 6 7 8 9 10 (Dark) Note This function is displayed in extended mode only. Restoring factory default settings (RESET) Restores all parameters to their factory default settings. Press and hold the SET button. A prompt appears asking you whether to restore factory default settings. Press the + or – button to select YES, then press the SET button. The transmitter parameters are restored to their factory default settings. Notes • This function can be used in transmission stopped mode only. • After a reset, the audio input level is also restored to its factory default setting. Note that this may cause the volume on devices connected to the tuner and in headphones to suddenly change. Displaying the software version (VERSION) Displays the software version of the transmitter. Note This function is displayed in extended mode only. 28 Transmitter Settings System Configuration Examples The following are configuration examples for use with UWP-D series devices. Sample configuration for ENG (Electronic News Gathering) or EFP (Electronic Field Production) with a camcorder Portable diversity tuner (URX-P03) (with shoe mount adapter attached) or Hand-held microphone (UTX-M03) Body-pack transmitter (UTX-B03) 1 XLR-BMP conversion output cable (supplied) XDCAM EX/HDV camcorder (HXR-NX3, etc.) System Configuration Examples 29 Error Messages When a problem occurs, one of the following error messages may appear on the display. 30 Message Meaning Solution EEP ERROR An error has occurred in the backup memory data. Contact your point of purchase or Sony service representative. PLL ERROR An error occurred in the PLL synthesizer circuit. Restart the unit. If the message persists, contact your point of purchase or Sony service representative. Error Messages Troubleshooting If you have any problem, use the following checklist before asking for repairs. If the problem persists, contact your point of purchase or Sony service representative. Symptom Cause Solution The unit does not turn The 3 and # polarity orientation of the batteries is Insert the batteries with the correct polarity on. incorrect. orientation. The batteries are getting low. Replace the batteries with new ones. The battery terminals are dirty. Clean the 3 and # terminals with a cotton swab. The unit does not turn The POWER/MUTING button is locked. off. Release the locked status in the PWR LOCK menu. The batteries become The batteries are getting low. drained quickly. Manganese batteries are being used. Replace the batteries with new ones. Use alkaline batteries. The battery life of a manganese battery is less than half that of an alkaline battery. The device is being used under cold conditions. The batteries drain quickly under cold conditions. The channel cannot be changed.1) The unit is not in transmission stopped mode. Turn off the unit, and then turn it on again while holding down the SET button to switch to transmission stopped mode. There is no sound. The channel setting on the transmitter is different from that on the tuner. Use the same channel setting on both the transmitter and tuner. The transmitter is not transmitting signals, or the transmission output is weak. Confirm that the transmitter is turned on. Alternatively, reduce the distance between the transmitter and tuner. The transmitter is set to line level input.2) Switch to microphone input. The compander mode setting on the transmitter is Use the same compander mode setting on both different from that on the tuner. the transmitter and tuner. The transmitter is muted.2) The sound is weak. Press the POWER/MUTING button on the transmitter to release the muted state. The attenuation level on the transmitter is too high. The input level of the transmitter is low. Set the attenuation of the transmitter to an appropriate level. The volume on the amplifier or mixer is low. Adjust the volume to an appropriate level. The transmitter is set to line level input.2) Switch to microphone input. The compander mode setting on the transmitter is Use the same compander mode setting on both different from that on the tuner. the transmitter and tuner. The sound is distorted. The attenuation level on the transmitter is too low or is set to 0. The input level is extremely high. Set the attenuation on the transmitter so that the audio is not distorted. The channel setting on the transmitter is different from that on the tuner. Use the same channel setting on both the transmitter and tuner. Headphones with a monaural mini jack are being used.3) Use headphones with a stereo mini jack. The compander mode setting on the transmitter is Use the same compander mode setting on both different from that on the tuner. the transmitter and tuner. Troubleshooting 31 Symptom Cause Solution There is sound interruption or noise. The channel setting on the transmitter is different from that on the tuner. Use the same channel setting on both the transmitter and tuner. Two or more transmitters are set to the same channel. Two or more transmitters cannot be used on the same channel. Refer to the frequency list stored on the supplied CD-ROM, and reconfigure the channel on each transmitter. The transmitters are not set to the channels within The channel plan is set so that no signal the same channel group. interference occurs when two or more transmitters are used simultaneously. Set each transmitter to a different channel within the same channel group. The RF indicator on the tuner lights up even when the transmitter is off. Adjacent channels are being used. Use the channels separated by at least two channels (250 kHz). Jamming radio waves are being received. Set the channel on the tuner to a channel for which the RF indicator does not light, or use the Clear Channel Scan function to switch to a channel without interference. Then, set the transmitter to the same channel as the tuner. If using two or more transmitters, change to a channel group that is not affected. The transmitter The infrared receptor on the transmitter is too far channel cannot be set from the infrared transmission port on the tuner. with infrared transmission. Interference from infrared communications between other devices or from direct sunlight is present. Reduce the distance between the infrared receptor on the transmitter and the infrared transmission port on the tuner to within about 20 cm (8 in.). The transmitting distance is reduced when interference from strong sunlight, for example, is present. Place the transmitter and tuner as close to each other as possible. 1) Body-pack transmitter (UTX-B03) / hand-held microphone (UTX-M03) / plug-on transmitter (UTX-P03) only 2) Body-pack transmitter (UTX-B03) / plug-on transmitter (UTX-P03) only 3) Portable diversity tuner (URX-P03) only 32 Troubleshooting Important Notes on Use Specifications Usage and storage Design and specifications are subject to change without notice. • Operating the UWP-D series devices near electrical equipment (motors, transformers, or dimmers) may cause interference due to electromagnetic induction. Keep the devices as far from such equipment as possible. • The presence of lighting equipment may produce electrical interference over a wide frequency range. In this case, interference may fluctuate with the position of the tuner antenna and position of the transmitter. Position the devices so that interference is minimized. • To avoid degradation of the signal to noise ratio, do not use UWP-D devices in noisy places or in locations subject to vibration, such as the following: – Near electrical equipment, such as motors, transformers, or dimmers – Near air conditioning equipment or places subject to direct air flow from an air conditioner – Near PA (public address) loudspeakers – Near equipment that might knock against the tuner Keep devices as far from such equipment as possible or use buffering material. Cleaning Clean the surface and the connectors of devices with a dry, soft cloth. Never use thinners, benzene, alcohol, or any other chemicals, since these may mar the finish. To prevent electromagnetic interference Some channels may be unable to be used due to noise generated due to the effects of external noise and/or radio interference. In this case, it is recommended to stop transmitting (turn the power off) or change to another frequency (change channel). To prevent electromagnetic interference from portable communication devices The use of portable telephones and other communication devices near the devices may result in malfunction and interference with audio signals. It is recommended that portable communication equipment near the devices be turned off. Notes • Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES. • SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND. Transmitter (UTX-B03/M03/P03) Items common to all transmitters Oscillator type Crystal-controlled PLL synthesizer Carrier frequencies Model available in USA: 470 MHz to 542 MHz (UC14 model), 566 MHz to 608 MHz and 614 MHz to 638 MHz (UC30 model), 638 MHz to 698 MHz (UC42 model) Model available in Europe: 470 MHz to 542 MHz (CE21 model), 566 MHz to 630 MHz (CE33 model), 638 MHz to 694 MHz (CE42 model), 710 MHz to 782 MHz (CE51 model) Model available in China: 710 MHz to 782 MHz (CN38 model) Model available in Korea: 925 MHz to 938 MHz (KR Model) Model available in Thailand and Taiwan: 794 MHz to 806 MHz (E model) Preemphasis 50 μs Reference deviation ±5 kHz (–60 dBV, 1 kHz input) Distortion 0.9% or less (–60 dBV, 1 kHz input) Signal-to-noise-ratio 60 dB or more Important Notes on Use / Specifications 33 Tone signal frequency In UWP-D compander mode: 32.782 kHz In UWP compander mode: 32 kHz In WL800 compander mode: 32.768 kHz Supply voltage 3.0 V DC (two LR6/AA size alkaline batteries) 5.0 V DC (supplied from USB connector) Operating temperature 0 °C to 50 °C (32 °F to 122 °F) 0 °C to 35 °C (32 °F to 95 °F) when charging Storage temperature –20 °C to +55 °C (–4 °F to +131 °F) Body-pack transmitter (UTX-B03) Antenna 1/4 λ wavelength wire antenna Audio input connector 3.5 mm diameter mini jack Reference audio input level –60 dBV (MIC input, 0 dB attenuation) RF output level 30 mW/5 mW selectable (for model available in USA, Europe, and China) 10 mW/2 mW selectable (for model available in Thailand, Taiwan, and Korea) Frequency response 40 Hz to 18 kHz Attenuation 0 dB to 27 dB (3 dB steps) Indicators AUDIO, POWER/MUTING Battery life (measured with two Sony LR6/AA size alkaline batteries at 25 °C (77 °F)) Approx. 8 hours with output power of 30 mW (for model available in USA, and Europe) Approx. 10 hours with output power of 10 mW (for model available in Thailand, Taiwan, Korea, and China) Dimensions Mass Approx. 103 g (3.6 oz) (excluding batteries) Hand-held microphone (UTX-M03) Microphone unit Dynamic Directional characteristic Unidirectional Antenna 1/4 λ wavelength wire antenna Reference audio input level –60 dBV (MIC input, 0 dB attenuation) RF output level 30 mW/5 mW selectable (for model available in USA, Europe, and China) 10 mW/2 mW selectable (for model available in Thailand, Taiwan, and Korea) Frequency response 50 Hz to 18 kHz Attenuation 0 dB to 21 dB (3 dB steps) Indicator POWER/MUTING Battery life (measured with two Sony LR6/AA size alkaline batteries at 25 °C (77 °F)) Approx. 8 hours with output power of 30 mW (for model available in USA, and Europe) Approx. 10 hours with output power of 10 mW (for model available in Thailand, Taiwan, Korea, and China) Dimensions Mass φ 48 × 260 mm (1 15/16 × 2 3/8 in.) (Diameter / length) Approx. 260 g (9.2 oz) (excluding batteries) Plug-on transmitter (UTX-P03) 63 × 82 × 20 mm (2 1/2 × 3 1/4 × 13/16 in.) (Width / height / depth) (excluding antenna) 34 Specifications Reference deviation ±10 kHz Reference audio input level –60 dBV (at 0 dB attenuation level) RF output level 50 mW (for model available in USA) 30 mW/5 mW selectable (for model available in Europe) 10 mW/2 mW selectable (for model available in Thailand, Taiwan, and Korea) Frequency response 50 Hz to 18 kHz Attenuation 0 dB to 48 dB (3 dB steps) Audio input connector XLR-3-11C type (female) Indicator AF/PEAK, POWER/MUTING, +48V Battery life Approx. 6 hours (measured with two Sony LR6/AA size alkaline batteries at 25 °C (77 °F)) Dimensions Mass 41.5 × 102 × 41.5 mm (1 11/16 × 4 1/8 × 1 11/16 in.) (width / height / depth) (including the audio input connector) Approx. 145 g (5.1 oz) (excluding batteries) Tuner Portable diversity tuner (URX-P03) Receive frequencies Model available in USA: 470 MHz to 542 MHz (UC14 model), 566 MHz to 608 MHz and 614 MHz to 638 MHz (UC30 model), 638 MHz to 698 MHz (UC42 model) Model available in Europe: 470 MHz to 542 MHz (CE21 model), 566 MHz to 630 MHz (CE33 model), 638 MHz to 694 MHz (CE42 model), 710 MHz to 782 MHz (CE51 model) Model available in China: 710 MHz to 782 MHz (CN38 model) Model available in Korea: 925 MHz to 938 MHz (KR Model) Model available in Thailand and Taiwan: 794 MHz to 806 MHz (E model) Signal-to-noise-ratio 60 dB or more Deemphasis 50 μs Reference frequency deviation ±5 kHz Frequency response 40 Hz to 15 kHz Distortion 0.9% or less (1 kHz modulation) Tone signal In UWP-D compander mode: 32.782 kHz In UWP compander mode: 32 kHz In WL800 compander mode: 32.768 kHz Indicators POWER, RF Operating temperature 0 °C to 50 °C (32 °F to 122 °F) 0 °C to 35 °C (32 °F to 95 °F) when charging Storage temperature –20 °C to +55 °C (–4 °F to +131 °F) Supply voltage 3.0 V DC (two LR6 AA alkaline batteries) 5.0 V DC (supplied from USB connector) Battery life Approx. 6 hours (Sony alkaline LR6 AA), 25°C (77 °F)) 1/4 λ wavelength wire antenna (angle-adjustable) Squelch level 15 dBμ Audio output level –58 dBm Audio output connector 3.5 mm diameter mini jack Headphone output level 5 mW (16 Ω) Reception method Space diversity method Local oscillator Crystal-controlled PLL synthesizer Antenna Specifications 35 Dimensions Mass 36 Specifications 63 × 82 × 23.8 mm (2 1/2 × 3 1/4 × 13/16 in.) (Width / height / depth) (excluding antenna) Approx. 136 g (4.8 oz) (excluding batteries) Sony Corporation
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Mode : UseOutlines XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : FrameMaker 7.1 Modify Date : 2013:12:20 14:10:33+09:00 Create Date : 2013:12:20 13:12:30Z Metadata Date : 2013:12:20 14:10:33+09:00 Format : application/pdf Title : UWP-D11/D12/D16 Creator : Sony Corporation Document ID : uuid:b3e71334-4ad3-48f2-9c56-81df3d36c99d Instance ID : uuid:467f9057-3c83-4944-b059-8c607c7c4dbb Page Count : 37 Author : Sony CorporationEXIF Metadata provided by EXIF.tools