Sony Group UTXP03 UHF SYNTHESIZED TRANSMITTER User Manual UWP D11 D12 D16

Download:
Mirror Download [FCC.gov]
Document ID	2181281
Application ID	HsjXHEHAD7QDkYIB4WSrCw==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	112.43kB (1405324 bits)
Date Submitted	2014-01-29 00:00:00
Date Available	2014-03-30 00:00:00
Creation Date	2013-12-20 13:12:30
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2013-12-20 14:10:33
Document Title	UWP-D11/D12/D16
Document Creator	FrameMaker 7.1
Document Author:	Sony Corporation

4-530-735-11 (1)
Wireless Microphone
Package
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
UWP-D11/D12/D16
© 2014 Sony Corporation
Table of Contents
Configuration of the Packages ..................3
UWP-D11 ..................................................... 3
UWP-D12 ..................................................... 4
UWP-D16 ..................................................... 5
Features .......................................................6
UWP-D11 ..................................................... 6
UWP-D12 ..................................................... 6
UWP-D16 ..................................................... 6
Name and Function of Parts.......................7
Body-pack transmitter (UTX-B03)............... 7
Hand-held microphone (UTX-M03)............. 8
Plug-on transmitter (UTX-P03).................. 10
Portable diversity tuner (URX-P03) ........... 11
Power Supply.............................................13
Inserting the batteries.................................. 13
Supplying power from a USB connector.... 14
Charging nickel metal hydride batteries ..... 15
Attaching Accessories..............................15
Attaching accessories to the body-pack
transmitter (UTX-B03)...................... 15
Attaching accessories to the hand-held
microphone (UTX-M03) ................... 16
Attaching accessories to the plug-on
transmitter (UTX-P03) ...................... 16
Attaching accessories to the portable
diversity tuner (URX-P03) ................ 17
Operation ...................................................18
If noise is generated .................................... 18
Tuner Settings ...........................................19
Menu structure and operation ..................... 19
Setting the receive channel ......................... 20
Searching for available channels within a
group (Clear Channel Scan) .............. 20
Searching for active channels within a group
(Active Channel Scan) ...................... 21
Adjusting the monitor audio level .............. 21
Configuration menu .................................... 22
Transmitter Settings .................................24
Menu structure and operation ..................... 24
Setting the transmit channel........................ 25
Configuration menu .................................... 26
System Configuration Examples .............29
Error Messages .........................................30
Troubleshooting ........................................31
Table of Contents
Important Notes on Use............................ 33
Usage and storage ....................................... 33
Cleaning...................................................... 33
Specifications ............................................ 33
Transmitter (UTX-B03/M03/P03).............. 33
Tuner........................................................... 35
Configuration of the Packages
This manual is for the UWP-D11/D12/D16 Wireless Microphone Packages. The contents of each package are described
below.
Note
Some of the packages may not be available in certain countries or areas.
For details, consult your Sony dealer.
UWP-D11
The package consists of a body-pack transmitter (UTX-B03), a portable diversity tuner (URX-P03), and their accessories.
When used in conjunction with a compact camcorder, a mobile system for ENG (Electronic News Gathering) or EFP
(Electronic Field Production) applications can be constructed.
Body-pack transmitter
(UTX-B03) (1)
Portable diversity tuner
(URX-P03) (1)
Supplied accessories
Omni-directional lavalier microphone (1)
Wind screen (1)
Shoe mount adapter (1)
XLR-BMP conversion output cable
for the URX-P03 (1)
Stereo mini plug-BMP conversion
cable (1)
Holder clip (1)
Belt clip (2)
Battery case (1) (CN models only)
Before Use (1)
Quick Start Guide (1)
CD-ROM (1)
Warranty card (1)
(UC and KR models only)
Configuration of the Packages
UWP-D12
The package consists of a hand-held microphone (UTX-M03), a portable diversity tuner (URX-P03), and their accessories.
When used in conjunction with a compact camcorder, a mobile system for ENG (Electronic News Gathering) or EFP
(Electronic Field Production) applications can be constructed.
Hand-held microphone
(UTX-M03) (1)
Portable diversity tuner
(URX-P03) (1)
Supplied accessories
Microphone holder (1)
XLR-BMP conversion output cable
for the URX-P03 (1)
Configuration of the Packages
Belt clip (1)
Stereo mini plug-BMP conversion
cable (1)
Shoe mount adapter (1)
Battery case (1) (CN models only)
Before Use (1)
Quick Start Guide (1)
CD-ROM (1)
Warranty card (1)
(UC and KR models only)
UWP-D16
The UWP-D16 consists of a plug-on transmitter (UTX-P03), a body-pack transmitter (UTX-B03), a portable diversity
tuner (URX-P03), and their accessories. When used in conjunction with a compact camcorder, a mobile system for ENG
(Electronic News Gathering) or EFP (Electronic Field Production) applications can be constructed.
Note
The CN model of this package is not available.
Plug-on transmitter
(UTX-P03) (1)
Body-pack transmitter
(UTX-B03) (1)
Portable diversity tuner
(URX-P03) (1)
Supplied accessories
Omni-directional lavalier microphone (1)
Soft case (1)
Stereo mini plug-BMP
conversion cable (1)
Wind screen (1)
Shoe mount adapter (1)
Holder clip (1)
Belt clip (2)
XLR-BMP conversion output cable for the
URX-P03 (1)
Battery case (1) (CN models only)
Before Use (1)
Quick Start Guide (1)
CD-ROM (1)
Warranty card (1) (UC and KR models only)
Configuration of the Packages
Features
The UWP-D11/D12/D16 (UWP series) Wireless
Microphone Packages comprise a transmitter (body-pack
transmitter (UTX-B03), hand-held microphone
(UTX-M03), or plug-on transmitter (UTX-P03)) and a
receiver (portable diversity tuner (URX-P03)). They can
be used for ENG (Electronic News Gathering) in
combination with a miniature camcorder.
They are equipped with a DSP for transmission of highquality sound using digital compander processing. They
can be used in combination with current Sony wireless
microphone systems (UWP series, WRT series, WRR
series, WRU series) by switching the compander mode.
The frequency and compander mode set on the tuner can
be sent to the transmitter using an infrared
communications link. Used in combination with the Clear
Channel Scan function of the tuner, this greatly reduces
the time required to set channels.
The contents of each package are described below.
UWP-D11
Body-pack transmitter (UTX-B03)
This transmitter is a lightweight, compact transmitter that
employs a crystal-controlled PLL synthesizer. It is
equipped with a muting function and a BMP-type
microphone input connector. The RF power output can be
switched between high and low. It is also equipped with a
MIC/LINE input switching function to support a variety
of input levels.
Portable diversity tuner (URX-P03)
This tuner employs a space diversity method featuring
little signal dropout and an angle-adjustable antenna. It
comes with an adapter for mounting on a compact
camcorder (HXR-NX3, etc.). It also features a Clear
Channel Scan function to search for available channels
automatically.
Features
UWP-D12
Hand-held microphone (UTX-M03)
This microphone features a robust, metallic body. It has a
muting function and attenuator adjustment function to
support a wide audio input level range.
It can be used in diverse applications simply by changing
the microphone capsule. It has a built-in antenna.
* Microphone unit mounting dimensions: 31.3 mm
diameter, 1.0 mm pitch
Portable diversity tuner (URX-P03)
This tuner employs a space diversity method featuring
little signal dropout and an angle-adjustable antenna. It
comes with an adapter for mounting on a compact
camcorder (HXR-NX3, etc.). It also features a Clear
Channel Scan function to search for available channels
automatically.
UWP-D16
Plug-on transmitter (UTX-P03)
This transmitter is a lightweight, compact plug-on type
transmitter that employs a crystal-controlled PLL
synthesizer. It has a muting function and an XLR-type
microphone input connector that can supply +48 V power
for connecting a wide range of microphones. It is also
equipped with a MIC/LINE switching function to support
a variety of input levels.
Body-pack transmitter (UTX-B03)
This transmitter is a lightweight, compact transmitter that
employs a crystal-controlled PLL synthesizer. It is
equipped with a muting function and a BMP-type
microphone input connector. The RF power output can be
switched between high and low. It is also equipped with a
MIC/LINE input switching function to support a variety
of input levels.
Portable diversity tuner (URX-P03)
This tuner employs a space diversity method featuring
little signal dropout and an angle-adjustable antenna. It
comes with an adapter for mounting on a compact
camcorder (HXR-NX3, etc.). It also features a Clear
Channel Scan function to search for available channels
automatically.
Name and Function of
Parts
Body-pack transmitter (UTX-B03)
Notes
• When the audio input level is set to MIC, a voltage for
the lavalier microphone power supply is applied to the
audio input connector. Special electrical wiring is used
inside the audio input connector for this purpose.
• If a lavalier microphone other than the one supplied is
connected, the proper performance may not be
obtained.
e POWER/MUTING button
Turns the power on/off. You also use this button to turn
the muting function on/off.
Function
Operation
Supply ON
Press button for one second or longer
Supply OFF
Press button until the indicator turns
off
Muting ON
Press button
Muting OFF
a Antenna
b POWER indicator
Displays the battery level and charging status.
Indicator display Status
On (green)
Sufficient battery level
Flashing (green)
Battery is getting low
On (orange)
Charging (when nickel metal hydride
rechargeable batteries are inserted
and power is turned off)
Off
Power is off or battery is empty
c AUDIO (audio input level) indicator
Turns on or off according to the audio input level as
follows.
On (red): Audio input level is too high. If the sound is
distorted, adjust the attenuation level to decrease the
audio input level (page 26).
On (green): Audio input level is appropriate.
Off: There is no audio input or the input level is too low.
Flashing (orange): Audio is muted (i.e., disabled).
f USB connector (Micro B type)
Connect to a commercially available USB portable power
supply.
When a USB portable power supply is connected while
the power is turned on, the unit automatically operates
with power supplied by the USB portable power supply.
When a USB portable power supply is connected while
nickel metal hydride batteries are inserted and the power
is turned off, the batteries are charged by the USB
portable power supply.
Note
Alkaline batteries and lithium batteries cannot be
recharged.
g Battery compartment
Accepts two AA batteries (alkaline, nickel metal hydride,
or lithium batteries).
For details on how to insert batteries, see “Power
Supply” (page 13).
h + or – button
Selects functions or values shown on the display.
d Audio input connector (BMP type)
Connect to the supplied lavalier microphone.
Name and Function of Parts
i Display section
k Infrared detector
Receives the frequency and compander mode set on the
tuner.
Hand-held microphone (UTX-M03)
A RF transmission indicator
Displays the current transmission status.
: Transmitting
– : Transmission stopped
B RF transmission power indicator
Indicates the current transmission power setting. You can
change the setting with the RF transmission power setting
function.
Inside the grip
For details on the RF transmission power setting
function, see “Setting the transmit output level (RF
POWER)” (page 26).
C Audio input level meter
Displays the the audio input level.
D Peak indicator
Lights up when the signal is 3 dB below the level at which
distortion begins as a warning of excessive input level.
E Input level indicator
Displays the input level status.
: Microphone input
: Line input
F Battery level indicator
Displays the battery level. Displays “EXT” when power
is supplied from the USB connector.
For details, see “Battery level indicator” (page 14).
G Menu display section
Displays various functions. Press the + or – button to
switch functions.
For details, see “Configuration menu” (page 22).
j SET button
Adjusts displayed function settings and enters the
displayed value.
Holding down the SET button while turning on the power
turns the transmitter on without transmitting a signal
(transmission stopped mode).
Name and Function of Parts
a Microphone unit
The standard-equipped microphone unit can be
interchanged with another microphone unit having a
diameter of 31.3 mm and a pitch of 1.0 mm.
For details on attaching and removing the microphone
unit, see “Replacing the microphone unit” (page 16).
b POWER indicator
Displays the battery level, charging status, and audio
muting (i.e., audio enabled or disabled) status.
Indicator display Status
On (green)
Sufficient battery level
Flashing (green)
Battery is getting low
On (orange)
Charging (when nickel metal hydride
rechargeable batteries are inserted
and power is turned off)
Off
Power is off or battery is empty
Flashing (orange)
Audio is muted (i.e., disabled)
c POWER/MUTING button
Turns the power on/off. You also use this button to turn
the muting function on/off.
E Battery level indicator
Displays the battery level.
For details, see “Battery level indicator” (page 14).
Function
Operation
Supply ON
Press button for one second or longer
Supply OFF
Press button until the indicator turns
off
Muting ON
Press button
Muting OFF
F Menu display section
Displays various functions. Press the + or – button to
switch functions.
For details, see “Configuration menu” (page 22).
d Battery compartment
Accepts two AA batteries (alkaline, nickel metal hydride,
or lithium batteries).
g Infrared detector
Receives the frequency and compander mode set on the
tuner.
For details on how to insert batteries, see “Power
Supply” (page 13).
h SET button
Adjusts displayed function settings and enters the
displayed value.
Holding down the SET button while turning on the power
turns the transmitter on without transmitting a signal
(transmission stopped mode).
e Antenna section
f Display section
i USB connector (Micro B type)
Connect to a commercially available USB portable power
supply.
When a USB portable power supply is connected while
nickel metal hydride batteries are inserted and the power
is turned off, the batteries are charged by the USB
portable power supply.
Note
A RF transmission indicator
Displays the current transmission status.
: Transmitting
– : Transmission stopped
Alkaline batteries and lithium batteries cannot be
recharged. Also, power cannot be supplied from a USB
portable power supply.
j + or – button
Selects functions or values shown on the display.
B RF transmission power indicator
Indicates the current transmission power setting. You can
change the setting with the RF transmission power setting
function.
For details on the RF transmission power setting
function, see “Setting the transmit output level (RF
POWER)” (page 26).
C Audio input level meter
Displays the the audio input level.
D Peak indicator
Lights up when the signal is 3 dB below the level at which
distortion begins as a warning of excessive input level.
Name and Function of Parts
Plug-on transmitter (UTX-P03)
Flashing (orange): Audio is muted (i.e., disabled).
e POWER/MUTING button
Turns the power on/off. You also use this button to turn
the muting function on/off.
Front
Function
Operation
Supply ON
Press button for one second or longer
Supply OFF
Press button until the indicator turns
off
Muting ON
Press button
Muting OFF
f Display section
Bottom
A RF transmission indicator
Displays the current transmission status.
: Transmitting
– : Transmission stopped
a Audio input connector (XLR type)
Connect to a microphone or the line output of an audio
mixer or other device.
b +48V (+48 V supply) indicator
Lights up when the unit is set to LINE input and is
supplying power to the connected microphone.
c POWER indicator
Displays the battery level and charging status.
B RF transmission power indicator
Indicates the current transmission power setting. You can
change the setting with the RF transmission power setting
function.
For details on the RF transmission power setting
function, see “Setting the transmit output level (RF
POWER)” (page 26).
C Audio input level meter
Displays the the audio input level.
Indicator display Status
On (green)
Sufficient battery level
Flashing (green)
Battery is getting low
On (orange)
Charging (when nickel metal hydride
rechargeable batteries are inserted
and power is turned off)
Off
Power is off or battery is empty
d AUDIO (audio input level) indicator
Turns on or off according to the audio input level as
follows.
On (red): Audio input level is too high. If the sound is
distorted, adjust the attenuation level to decrease the
audio input level (page 26).
On (green): Audio input level is appropriate.
Off: There is no audio input or input level is too low.
10
Name and Function of Parts
D Peak indicator
Lights up when the signal is 3 dB below the level at which
distortion begins as a warning of excessive input level.
E Input level indicator
Displays the input level status.
: Microphone input
: Line input
F Battery level indicator
Displays the battery level. Displays “EXT” when power
is supplied from the USB connector.
For details, see “Battery level indicator” (page 14).
G Menu display section
Displays various functions. Press the + or – button to
switch functions.
Portable diversity tuner (URX-P03)
Front
For details, see “Configuration menu” (page 22).
g + or – button
Selects functions or values shown on the display.
h SET button
Adjusts displayed function settings and enters the
displayed value.
Holding down the SET button while turning on the power
turns the transmitter on without sending a signal
(transmission stopped mode).
i Infrared detector
Receives the frequency and compander mode set on the
tuner.
j USB connector (Micro B type)
Connect to a commercially available USB portable power
supply.
When a USB portable power supply is connected while
the power is turned on, the unit automatically operates
with power supplied by the USB portable power supply.
When a USB portable power supply is connected while
nickel metal hydride batteries are inserted and the power
is turned off, the batteries are charged by the USB
portable power supply.
Note
Alkaline batteries and lithium batteries cannot be
recharged.
k Battery compartment
Accepts two AA batteries (alkaline, nickel metal hydride,
or lithium batteries).
For details on how to insert batteries, see “Power
Supply” (page 13).
Bottom
a Antenna
b PHONES (monitor) connector (3.5-mm
diameter, stereo mini jack)
Connect to headphones to monitor the audio output.
Note
Do not connect headphones with a monaural mini jack.
This may short-circuit the headphone outputs, resulting in
distorted sound output.
c POWER indicator
Displays the battery level and charging status.
Indicator display Status
On (green)
Sufficient battery level
Flashing (green)
Battery is getting low
On (orange)
Charging (when nickel metal hydride
rechargeable batteries are inserted
and power is turned off)
Off
Power is off or battery is empty
Name and Function of Parts
11
d RF (radio frequency input) indicator
Displays the RF input level using the following colors.
On (green): Input level is 25 dBμ or more.
On (red): Input level is 15 to 25 dBμ.
Off: Input level is 15 dBμ or lower.
i SET button
Adjusts displayed function settings and enters the
displayed value.
Holding down the SET button while turning on the power
turns the transmitter on without sending a signal
(transmission stopped mode).
* 0 dBμ = 1 μVEMF
e Infrared transmitter port
Sends the set frequency and compander mode to the
transmitter.
f + or – button
Selects functions or values shown on the display.
g Battery compartment
Accepts two AA batteries (alkaline, nickel metal hydride,
or lithium batteries).
For details on how to insert batteries, see “Power
Supply” (page 13).
h Display section
j POWER button
Turns the power on/off.
Function
Operation
Supply ON
Press button for one second or longer
Supply OFF
Press button until the indicator turns
off
k OUTPUT (audio output) connector (3.5-mm
diameter, stereo mini jack)
Connect one end of the supplied XLR-BMP conversion
output cable for the URX-P03 or the stereo mini plugBMP conversion cable here and the other end to the
microphone input on a camcorder, mixer, or amplifier. If
the microphone input connector on the connected device
is a stereo mini jack, connect the straight (BMP) plug to
the tuner and the L-shaped (stereo mini) plug to the
microphone input connector on the device.
Note
To prevent damaging the tuner, do not apply a voltage to
this connector from a microphone external power supply
or other source.
A Audio input level meter
Displays the the audio input level.
B Peak indicator
Lights up when the signal is 3 dB below the level at which
distortion begins as a warning of excessive input level.
C Battery level indicator
Displays the battery level. Displays “EXT” when power
is supplied from the USB connector.
For details, see “Battery level indicator” (page 14).
D RF level (reception level) indicator
Indicates the current reception level.
E Menu display section
Displays various functions. Press the + or – button to
switch functions.
For details, see “Configuration menu” (page 22).
12
Name and Function of Parts
l USB connector (Micro B type)
Connect to a commercially available USB portable power
supply.
When the power is turned on, the unit operates with
power supplied by the USB portable power supply. When
nickel metal hydride batteries are inserted and the power
is turned off, the battery is charged by the USB portable
power supply.
Note
Alkaline batteries and lithium batteries cannot be
recharged.
m Auxiliary connector
Used to connect external accessories.
Power Supply
Inserting the batteries
Notes
This section describes the power supply of each device
and the charging of nickel metal hydride batteries.
Body-pack transmitter (UTX-B03) and plug-on
transmitter (UTX-P03)
The unit operates using power supplied from two AA
batteries (alkaline, nickel metal hydride, or lithium
batteries) or from a supply connected to the USB
connector. If power is supplied simultaneously from
batteries and from a supply connected to the USB
connector, power from the USB connector has
precedence. For details about inserting batteries in each
device and displaying the battery level, or supplying
power from a supply connected to the USB connector, see
the following sections.
Hand-held microphone (UTX-M03)
The unit operates from two AA batteries (alkaline, nickel
metal hydride, or lithium batteries). For details about
inserting batteries and displaying the battery level, see the
following sections.
Portable diversity tuner (URX-P03)
The unit operates from two AA batteries (alkaline, nickel
metal hydride, or lithium batteries), power supplied from
a supply connected to the USB connector, or power
supplied from the auxiliary connector. The power supply
that has precedence when both AA battery power and an
external power supply via the USB connector or auxiliary
connector are available can be specified using the
POWER SEL (external power selection) function. Under
the factory default setting, the power supplied from
inserted AA batteries has precedence. For details about
inserting batteries and displaying the battery level, or
supplying power from supply connected to the USB
connector, see the following sections.
• Always use sets of the same type of battery. Do not use
batteries of different types or batteries with different
charge level together.
• Replacing the batteries during operation may generate
a large noise. Be sure to turn off the unit before
replacing the batteries.
Body-pack transmitter (UTX-B03) / plugon transmitter (UTX-P03) / portable
diversity tuner (URX-P03)
The following describes the procedure using illustrations
for the body-pack transmitter (UTX-B03). Batteries can
be inserted in the plug-on transmitter (UTX-P03) and
portable diversity tuner (URX-P03) in the same manner.
Press and hold the POWER/MUTING button to turn
the power off.
Slide the two catches inward (as indicated) and pull
the battery compartment out.
Insert two new AA batteries into the battery
compartment with 3 and # polarities in the correct
orientation, and close the the compartment.
For details on the POWER SEL function setting, see
“Selecting the preferred power supply (POWER SEL)”
(page 23).
Note
The use of manganese batteries will result in poor
performance. Do not use manganese batteries.
Make sure that the battery compartment is locked
securely.
Power Supply
13
Hand-held microphone (UTX-M03)
Press and hold the POWER/MUTING button to turn
the power off.
Turn the grip in the direction of the arrow, and pull
the grip down until the battery compartment is
visible.
Notes
• When BATTERY is set to TYPE1, the battery level is
indicated based on the use of new LR6 (size AA) Sony
alkaline batteries. The battery level may not be
displayed correctly when different kinds of batteries,
different brand of batteries, or old batteries are used. If
using batteries other than size AA alkaline batteries,
select the battery type using the BATTERY function.
• If you plan to use the transmitter continuously for a long
period of time, it is recommended that you replace the
batteries with brand new ones.
For details on the BATTERY function setting, see “Setting
the battery type (BATTERY)” (page 23).
Insert two new AA batteries into the battery
compartment with 3 and # polarities in the correct
orientation.
Close the grip, turning it in the reverse direction of
step 2.
Battery level indicator
Press and hold the POWER button for 1 second or longer
to display the battery level on the display.
Immediately replace both batteries with new batteries if
the indicator starts flashing (indication 5 below). If using
new alkaline batteries, use after checking the
recommended time limits.
Battery precautions
Batteries may leak or explode if mistreated. Be sure to
follow these instructions.
• Insert batteries in the correct 3 and # polarity
orientation.
• Always replace the two batteries together with new
ones.
• Do not use different types of batteries or old and new
ones together.
• Dry cells are not rechargeable.
• When not using the device for a long period of time,
remove the batteries. If the batteries leak for any reason,
consult your Sony service representative.
Supplying power from a USB
connector
1 Lights
Good
The transmitter (UTX-B03/P03) and tuner (URX-P03)
can operate from a commercially available portable
power supply (with USB output function) connected to
the USB connector.
Use a portable power supply that satisfies the following
conditions.
• Output connector: USB micro B type
• Rated voltage: 5 V
• Output current: 200 mA or higher
2 Lights
Less than 70% charge remaining
Displays “EXT” when power is supplied from the USB
connector.
3 Lights
Less than 40% charge remaining
4 Lights
Less than 20% charge remaining
5 Flashes
Almost empty
Battery level
indicator
Battery status
Note
14
Power Supply
The UTX-M03 hand-held microphone cannot be supplied
using a USB connector.
Charging nickel metal hydride
batteries
You can charge nickel metal hydride batteries inserted in
the transmitter (UTX-B03/M03/P03) and tuner
(URX-P03).
When charging nickel metal hydride batteries, turn the
power off and connect a commercially available portable
power supply (with USB output function) to the USB
connector.
The POWER indicator is lit orange while charging
batteries. When charging is finished, the POWER
indicator goes off.
Attaching Accessories
This section describes how to attach the supplied
accessories to each device.
Attaching accessories to the bodypack transmitter (UTX-B03)
Connecting the microphone
Microphone (supplied)
For a secure connection, turn to lock the connector.
Note
Be sure to attach or remove the microphone after turning
off the transmitter.
Attaching the holder clip to the
microphone
Push the end of the microphone
holder to expand the ring opening
(1), and insert the microphone (2).
Align the groove on the base of the
microphone with the ring, then
release the clip to secure the
microphone.
To secure the microphone cable
Insert the microphone cable through the
clamp of the holder clip.
Attaching Accessories
15
Attaching the wind screen to the
microphone
Attaching accessories to the handheld microphone (UTX-M03)
Attaching the microphone holder
Align and insert the microphone
into the hole in the wind screen.
Insert the base of the
microphone into the holder.
Attaching a belt clip
Replacing the microphone unit
Removing the microphone unit
Insert one end of the belt
clip into one of two holes
on either side of the
transmitter, and then
insert the other end into
the hole on the other side.
Turn the microphone unit in the
direction of the arrow.
Attaching the microphone unit
Turn the microphone unit in the opposite direction from
when you removed it, and make sure that the unit is
securely attached to the microphone.
To remove a belt clip
Insert a pointed object, such as
a ball-point pen, between the
belt clip and the transmitter,
and pry the end of the belt clip
from the hole on the side of the
transmitter.
Attaching accessories to the plugon transmitter (UTX-P03)
Attaching a microphone or cable
Microphone or
cable connector
Push the microphone or cable connector (XLR-3-12C
connector) into the audio input connector of the
UTX-P03 until it clicks into place.
16
Attaching Accessories
Disconnecting a microphone or cable
Microphone or
cable connector
Release button
Attaching the shoe mount adapter
Attach the belt clip before attaching the shoe mount
adapter (page 16).
Note
Attach belt clips upside-down if planning to attach the
shoe mount adapter.
Press the release button and pull the microphone
or cable out slowly.
Attaching accessories to the
portable diversity tuner (URX-P03)
Connecting the conversion cable to the
OUTPUT connector
Example: XLR-BMP conversion output
cable for the URX-P03
For a secure connection, turn to lock the
connector.
Attaching a belt clip
Push the bottom of the belt clip to make some space
between the belt clip and the tuner (1), align the belt clip
with the two vertical grooves on the shoe mount adapter, and
insert the adapter in the direction of the arrow (2). Push the
shoe mount adapter in fully until the belt clip fits into the
horizontal groove on the adapter holds.
See “Attaching a belt clip” (page 16).
Note
If attaching a camcorder, bend the URX-P03 antenna
down so that the antenna is not reflected on the display.
To remove the shoe mount adapter
ÅuPush and hold the part labeled “PUSH” on the shoe
mount adapter 1, and disengage the horizontal part of the
belt clip from the horizontal groove on the shoe mount
adapter (2). Then, push the shoe mount adapter in the
direction of the arrow (3).
Attaching Accessories
17
7
Operation
Information about the channel set on the tuner is sent
to the transmitter, and a prompt appears on the
transmitter display asking if you want to change to
that frequency.
Procedure for UWP series devices (UTX-B03/
M03/P03 and URX-P03)
Place the infrared transmitter port on the tuner near
the infrared detector on the transmitter.
Connect the tuner as required.
For details about example connections, see “System
Configuration Examples” (page 29).
Press and hold the POWER button for at least one
second on the tuner to turn the power on.
Use the + or – button to display the AUTO SET
screen on the tuner.
Use the + or – button to select YES, then press the
SET button on the transmitter.
This sets the transmit channel.
Notes
Press and hold the SET button on the tuner for at least
one second.
“YES” flashes on the display.
• The infrared transmission from the tuner in step 5
continues for about ten seconds. Perform steps 6
and 7 within those ten seconds. If ten seconds have
elapsed, you can reestablish the infrared link using
the SYNC menu on the tuner.
• Place the tuner and transmitter within about 20 cm
(8 in.) of each other.
• If five seconds elapse without any user input after
the prompt appears on the transmitter display, the
transmitter returns to its previous state without
changing the frequency.
• Communications using the infrared link may be
adversely affected, depending on the surrounding
environment. If this occurs, use the SYNC menu on
the tuner to reestablish the link.
If noise is generated
Press the SET button on the tuner.
Clear Channel Scan starts searching for an available
channel.
When Clear Channel Scan finishes, the channel with
the least noise and interference will be set.
When the channel is set, infrared transmission starts
automatically.
Depending on the environment where the devices are
installed, external noise or radio waves may disrupt
transmission on certain channels. When selecting a
channel under these circumstances, turn off the
transmitter. Then, on the tuner, select a channel for which
the RF indicator does not light up (i.e., a channel free
from noise or radio wave interference). Set the same
channel on the transmitter.
Note
Some noise may occur when power is turned on.
Accordingly, turn down the audio input level of
devices connected to the tuner when turning the
power on.
18
Press and hold the SET button on the transmitter and
press the POWER/MUTING button to turn the power
on.
Operation
Notes
To prevent interference or noise, take the following
precautions.
• Do not use two or more transmitters on the same
channels.
• When operating two or more UWP series packages
simultaneously, set each package to a different channel
within the same channel group.
• Keep the antennas on the tuner and transmitter
separated by at least 3 meters (about 10 feet).
• When operating two or more UWP series packages
simultaneously with different channel groups, make
sure that they are at least 100 meters (330 feet) apart if
they are used within clear sight of each other (actual
distance may vary depending on the circumstances).
Tuner Settings
Menu structure and operation
Procedure for portable diversity tuner (URX-P03)
There are two menu display modes that can be selected
according to the application.
Simple mode
This mode displays only the required settings for the tuner
and audio output.
You can enable simple mode by setting MENU MODE
(menu display mode) to SIMPLE.
Configuration menus
• GP/CH (group/channel) select
• PHONES (monitor audio) setting
• AUTO SET (auto channel setting) function
• BAND (frequency band) select
• CLR SCAN (clear channel scan) function
• OUT LEVEL (audio output level) setting
• SYNC (infrared transmitter) function
• TIME (accumulated running time) display
• MENU MODE (menu display mode) setting
Extended mode
This mode displays all configuration menus.
You can enable extended mode by setting MENU MODE
(menu display mode) to ADVANCED.
Note
The existing settings configured in extended mode are
active even when using simple mode.
Configuration menus
• GP/CH (group/channel) select
• PHONES (monitor audio) setting
• AUTO SET (auto channel setting) function
• BAND (frequency band) select
• CLR SCAN (clear channel scan) function
• OUT LEVEL (audio output level) setting
• SYNC (infrared transmitter) function
• TIME (accumulated running time) display
• MENU MODE (menu display mode) setting
• COMPANDER (compander mode) setting
• POWER SEL (external power selection) setting
• ACT SCAN (active channel scan) function
• PWR LOCK (POWER button lock) function
• BATTERY (battery type) setting
• CONTRAST (display text contrast) setting
• RESET (factory default setting) function
• VERSION (software version) display
Tuner Settings
19
Basic menu operation
The basic menu operation is the same in simple mode and
extended mode.
Use the + or – button to select the desired group
name, then press the SET button.
The channel group is set, and the channel number
display starts flashing.
Function name
Setting
Press the + or – button to display the function to be
set.
Press and hold the SET button until the setting starts
flashing.
Press the + or – button to change the setting.
Press the SET button to enter the setting.
Notes
• If no operation is performed for ten seconds on a
function menu other than GP/CH, the display will
automatically return to the GP/CH screen.
• If no operation is performed for seven seconds, the
backlight will turn off. Pressing any button will turn the
backlight on again.
Setting the receive channel
Procedure for portable diversity tuner (URX-P03)
For details about the channel groups and channels that can
be selected, refer to the “Frequency List” on the
CD-ROM.
Use the + or – button to display the GP/CH menu.
Press and hold the SET button for one second or
longer.
Use the + or – button to select the desired channel
number, then press the SET button.
The displays stops flashing and the desired channel is
set.
Notes
• If there is no user input within ten seconds after the
channel group display or channel number display starts
flashing, the display returns to the existing setting. The
same applies when setting other parameters.
• The frequency indicator changes in response to the
channel number.
• The tuner continues to receive, even when setting the
receive channel.
• Do not remove the batteries while setting the receive
channel. If they are removed, re-insert them and repeat
the procedure from the beginning.
• Make sure that the same channel is set on the
transmitter and tuner within the same system.
Searching for available channels
within a group (Clear Channel Scan)
Procedure for portable diversity tuner (URX-P03)
You can search for available channels within the
specified channel group.
Before performing this procedure, select the channel
group.
For details, see “Setting the receive channel” (page 20).
Use the + or – button to display the CLR SCAN
menu.
Press and hold the SET button for one second or
longer.
The channel group display starts flashing.
Press and hold until the channel group and “+”
display starts flashing.
20
Tuner Settings
2
Press and hold the SET button for one second or
longer.
Press and hold until the channel group and “+”
display starts flashing.
Press the + button.
The tuner starts to scan through the selected channel
group. When available channels are found, the first
channel number among the available channels starts
flashing on the display.
To display the next available channel number
The tuner starts to scan for active channels in the
selected channel group. When active channels are
found, the first channel number among the active
channels starts flashing on the display.
Press the + button.
To cancel searching
Press the – button. The display returns to the CLR
SCAN menu.
To display the next active channel number
Press the + button.
Press the SET button when the desired channel
number starts flashing.
The search for available channels finishes and the
displayed channel is set.
The channel setting is transmitted from the infrared
transmission port for about ten seconds after setting
the channel. During this interval, place the infrared
detector on the transmitter (with the power turned on)
near the tuner to transfer the channel setting from the
tuner to the transmitter.
To scan channels automatically when
power is turned on
With the tuner power off, press and hold the SET button
and press the POWER button for at least one second to
turn the power on and to automatically start a clear
channel scan.
To cancel searching
Press the – button. The display returns to the ACT
SCAN menu.
Adjusting the monitor audio level
Procedure for portable diversity tuner (URX-P03)
You can set the monitor audio level within the range 1 to
16.
Use the + or – button to display the ACT SCAN
menu.
Use the + or – button to display the PHONES menu.
The current monitor audio level is displayed.
Press and hold the SET button for at least one second.
Press and hold until the monitor audio level flashes.
For details, see “Setting the receive channel” (page 20).
Press the SET button when the desired channel
number starts flashing.
The search for active channels finishes and the
displayed channel is set.
Searching for active channels
within a group (Active Channel
Scan)
Procedure for portable diversity tuner (URX-P03)
You can search for channels in use within the specified
channel group. This is useful when using more than one
tuner in combination with a single transmitter.
Before performing this procedure, select the channel
group.
Press the + button.
Use the + or - button to set the desired monitor audio
level, then press the SET button.
The setting value is stored. The setting is retained
even after the power is turned off.
Tuner Settings
21
Configuration menu
Procedure for portable diversity tuner (URX-P03)
This section describes each function and configurable
items.
Underlined entries are factory default values.
Selecting group/channel (GP/CH)
The factory default setting varies depending on the
model.
For details, see “Setting the receive channel” (page 20).
Adjusting the monitor audio level
(PHONES)
Note
The monitor output level does not change when you
change the output level in the OUT LEVEL menu. The
monitor output level is adjusted separately.
For details about adjusting the monitor audio level, see
“Adjusting the monitor audio level” (page 21).
Using infrared transmission (SYNC)
Transfers the frequency and compander mode set on the
tuner to a transmitter using an infrared transmitter.
Use the + or – button to display the SYNC menu.
Press and hold the SET button for one second or
longer.
Adjusts the monitor audio level for the headphones.
For details, see “Adjusting the monitor audio level”
(page 21).
Setting an available channel automatically
(AUTO SET)
A confirmation screen appears.
Use the + or – button to display “YES.”
Turn the transmitter power on, and place the infrared
transmitter port on the tuner near the infrared detector
on the transmitter.
Automatically searches for and sets an available channel,
and starts infrared transmission to the transmitter.
For details, see “Operation” (page 18).
Selecting the frequency band (BAND)
Selects the receive frequency band.
A prompt appears on the transmitter display asking
you whether to change the frequency.
Use the + or – button on the transmitter to select YES.
Press the SET button on the transmitter.
The frequency and compander mode for use on the
transmitter are set.
Note
Frequency bands may not be selectable, depending on the
model. Frequency bands will not be displayed on such
models.
For details about the groups and channels in each
frequency band, refer to the “Frequency List” on the
CD-ROM.
Searching for and selecting available
channels (CLR SCAN)
Searches for available channels.
Notes
• When using the infrared link, place the tuner and
transmitter within about 20 cm (8 in.) of each other.
• After the infrared transmission starts, place the tuner
near the transmitter within ten seconds. After ten
seconds have elapsed, the infrared transmission finishes
and the display returns to the previous menu.
• After the prompt appears on the transmitter, you can
select NO or do nothing for about five seconds to return
to the previous menu screen automatically, and the
information received over the infrared link is discarded.
For details, see “Searching for available channels within
a group (Clear Channel Scan)” (page 20).
Displaying the accumulated running time
(TIME)
Setting the audio output level (OUT
LEVEL)
Displays the accumulated running time of the tuner as a
guide to total usage time.
The factory default setting is 00:00. Up to 99:99 can be
displayed.
Sets the audio output level. You can set the level in 3 dB
increments in the range –12 dB to +12 dB. The factory
default setting is 0 dB.
To reset the time display
22
Tuner Settings
Press and hold the SET button until the time display
starts flashing.
2
Press the – button to display “00:00 CLR” and press
the SET button.
Pressing the + button when “00:00 CLR” is displayed
causes the time display to start flashing. You can
press the SET button in this state to cancel the reset of
the accumulated running time.
Setting the menu display mode (MENU
MODE)
Sets the menu display mode.
SIMPLE: Displays only the required settings.
ADVANCED: Displays all settings.
Setting the compander mode
(COMPANDER)
Sets the operating mode of the compander.
UWP-D: High speech quality mode supported in
combination with UWP-D series devices.
UWP: Mode supported in combination with Sony UWPseries transmitters.
WL800: Mode supported in combination with Sony 800series transmitters.
Notes
• This function is displayed in extended mode only.
• The correct speech quality may not be achieved or
audio may not be output at all if using a combination of
devices with different compander mode settings.
Selecting the preferred power supply
(POWER SEL)
Specifies whether the power supply from the batteries
inserted in the unit or from an external USB portable
power supply or accessory connected to the USB
connector or auxiliary connector has precedence.
BATTERY: Batteries inserted in the unit have
precedence.
EXTERNAL: Power supplies from externally connected
sources have precedence.
Note
This function is displayed in extended mode only.
For details, see “Searching for active channels within a
group (Active Channel Scan)” (page 21).
Locking the POWER button (PWR LOCK)
You can lock the POWER button to prevent the power
being turned off inadvertently during reception.
UNLOCK: Press and hold the POWER button to turn the
power on/off.
LOCK: The power does not turn off, even after pressing
the POWER button.
To release the lock state
To release the lock state, either set the PWR LOCK menu
to UNLOCK or use the following procedure.
When the button is in the LOCK state, press and hold
the POWER button.
A prompt appears asking you whether to release the
lock state.
Use the + or – button to select YES, then press the
SET button.
The lock state is released.
Notes
• This function is displayed in extended mode only.
• The POWER button lock state does not change after
switching to simple mode after setting the button to
LOCK in extended mode.
• If the batteries are removed and reinserted while the
POWER button is set to LOCK, the power will turn on
automatically but the lock state of the POWER button
does not change.
Setting the battery type (BATTERY)
You can set the type of battery being used in order to
provide a more accurate battery level indication.
Notes
• When power from the preferred source is cut off, the
power supply automatically switches to the other
source.
• When only one power supply is available, that power
supply will be used regardless of the POWER SEL
setting.
Setting the frequency to an active channel
(ACT SCAN)
Searches for channels already in use. This is useful when
using more than one tuner in combination with a single
transmitter.
TYPE1: Recommended setting when using alkaline LR6
(size AA) batteries. Indicates the battery level based on
the characteristics of new Sony alkaline LR6 (size AA)
batteries.
TYPE2: Recommended setting when using rechargeable
nickel metal hydride batteries.
TYPE3: Recommended setting when using lithium
batteries.
Notes
• This function is displayed in extended mode only.
• The characteristics of batteries change according to
battery type and environmental conditions. It is
recommended that you understand the characteristics of
batteries before using them.
Tuner Settings
23
Setting the display contrast (CONTRAST)
You can adjust the contrast of text and icons on the
display in the range 1 to 10.
The configurable values are given below.
(Light) 1 2 3 4 5 6 7 8 9 10 (Dark)
Note
This function is displayed in extended mode only.
Restoring factory default settings
(RESET)
Restores all parameters to their factory default settings.
Press and hold the SET button. A prompt appears asking
you whether to restore factory default settings. Press the
+ or – button to select YES, then press the SET button.
The tuner parameters are restored to their factory default
settings.
Notes
• This function is displayed in extended mode only.
• After a reset, the audio output level and monitor output
level are also restored to their factory default settings.
Note that this may cause the volume on connected
devices and in headphones to suddenly change.
Displaying the software version
(VERSION)
Transmitter Settings
Menu structure and operation
Procedure for all transmitters (UTX-B03/M03/
P03)
There are three menu display modes that can be selected
according to the application.
Simple mode
This mode displays only the required settings for
transmitting audio.
You can enable simple mode by setting MENU MODE
(menu display mode) to SIMPLE.
Configuration menus
• GP/CH (group/channel) select
• BAND (frequency band) select
• RF POWER (RF transmit output level) select
(UTX-B03/M03 only)
• ATT (attenuator) setting
• LCF (low-cut filter) setting
• IN LEVEL (audio input level) select (UTX-B03/P03
only)
• +48V (+48 V supply) setting (UTX-P03 only)
• TIME (accumulated running time) display
• MENU MODE (menu display mode) setting
Displays the software version of the tuner.
Notes
Note
This function is displayed in extended mode only.
The following configuration menus cannot be modified
during transmission. Set these menus in transmission
stopped mode.
• GP/CH (group/channel) select
The following configuration menus do not appear and
cannot be modified during transmission. Set these menus
in transmission stopped mode.
• BAND (frequency band) select
• RF POWER (RF transmit output level) select
(UTX-B03/M03 only)
Extended mode
This mode displays all configuration menus.
You can enable extended mode by setting MENU MODE
(menu display mode) to ADVANCED.
Note
The existing settings configured in extended mode are
active even when using simple mode.
Configuration menus
• GP/CH (group/channel) select
• BAND (frequency band) select
• RF POWER (RF transmit output level) select
(UTX-B03/M03 only)
• ATT (attenuator) setting
• LCF (low-cut filter) setting
24
Transmitter Settings
• IN LEVEL (audio input level) select (UTX-B03/P03
only)
• +48V (+48 V supply) setting (UTX-P03 only)
• TIME (accumulated running time) display
• MENU MODE (menu display mode) setting
• COMPANDER (compander mode) setting
• PWR LOCK (POWER button lock) function
• MUTING (muting function) setting
• PHASE (phase switching) setting (UTX-B03 only)
• BATTERY (battery type) setting
• CONTRAST (display text contrast) setting
• RESET (factory default setting) function
• VERSION (software version) display
Note
The following configuration menus cannot be modified
during transmission. Set these menus in transmission
stopped mode.
• GP/CH (group/channel) select
The following configuration menus do not appear and
cannot be modified during transmission. Set these menus
in transmission stopped mode.
• BAND (frequency band) select
• RF POWER (RF transmit output level) select
(UTX-B03/M03 only)
• RESET (factory default setting) function
Transmission stopped mode
This mode allows settings to be modified when RF
transmission has stopped.
Use this mode to make settings without risk of
interrupting other wireless traffic when setting channels
and other settings.
With the power off, press and hold the SET button and
press the POWER/MUTING button for at least one
second to turn the power on and to display the
transmission stopped mode menu.
The following configuration menus can only be modified
in transmission stopped mode.
• GP/CH (group/channel) select
• BAND (frequency band) select
• RF POWER (RF transmit output level) select
(UTX-B03/M03 only)
• RESET (factory default setting) function
Basic menu operation
The basic menu operation is the same in simple mode,
extended mode, and transmission stopped mode.
Press the + or – button to display the function to be
set.
Press and hold the SET button until the setting starts
flashing.
Press the + or – button to change the setting.
Press the SET button to enter the setting.
Notes
• If no operation is performed for ten seconds on a
function menu other than GP/CH, the display will
automatically return to the GP/CH screen.
• If no operation is performed for seven seconds, the
backlight will turn off. Pressing any button will turn the
backlight on again.
Setting the transmit channel
Procedure for all transmitters (UTX-B03/M03/
P03)
For details about the channel groups and channels that can
be selected, refer to the “Frequency List” on the
CD-ROM.
Press and hold the SET button and press the POWER/
MUTING button to turn the power on.
Use the + or – button to display the GP/CH menu.
Press and hold the SET button for one second or
longer.
Press and hold until the channel group display starts
flashing.
Use the + or – button to select the desired group
name, then press the SET button.
The channel group is set, and the channel number
display starts flashing.
Function name
Setting
Transmitter Settings
25
5
Use the + or – button to select the desired channel
number, then press the SET button.
The displays stops flashing and the desired channel is
set.
Notes
• If there is no user input within ten seconds after the
channel group display or channel number display starts
flashing, the display returns to the existing setting. The
same applies when setting other parameters.
• The frequency indicator changes in response to the
channel number.
• Do not remove the batteries while making settings. If
they are removed, re-insert them and repeat the
procedure from the beginning.
• Make sure that the same channel is set on the
transmitter and tuner within the same system.
Note
This function can be modified in transmission stopped
mode only.
Adjusting the audio input attenuation
level (ATT)
You can set the audio input attenuation level in 3 dB
increments to reduce noise distortion. The factory default
setting is 0 dB.
Notes
• On the UTX-B03/P03, “---” is displayed if IN LEVEL
is set to LINE, and the attenuation level cannot be
modified (fixed at 0 dB).
• If the attenuation level is set too high, the noise level
may increase. Set the level as close as possible to 0 dB
if using a lavalier microphone attached to your torso.
Configuration menu
Procedure for all transmitters (UTX-B03/M03/
P03)
This section describes each function and configurable
items.
Underlined entries indicate factory default settings.
Selecting group/channel (GP/CH)
The factory default setting varies depending on the
model.
For details, see “Setting the transmit channel” (page 25).
Note
This function can be modified in transmission stopped
mode only.
Selecting the frequency band (BAND)
Selects the transmit frequency band.
Notes
• This function can be modified in transmission stopped
mode only.
• Frequency bands may not be selectable, depending on
the model. Frequency bands will not be displayed on
such models.
For details about the groups and channels in each
frequency band, refer to the “Frequency List” on the
CD-ROM.
Setting the transmit output level (RF
POWER) (UTX-B03/M03 only)
Set the transmitted RF power to HIGH or LOW. The
transmit power level varies depending on the model.
26
Transmitter Settings
Setting the low-cut filter (LCF)
You can set the low-cut filter to reduce noise caused by
wind.
You can set the cutoff frequency to OFF/LOW/MID/
HIGH.
OFF: No filtering
LOW: 100 Hz cutoff frequency
MID: 150 Hz cutoff frequency
HIGH: 200 Hz cutoff frequency
Switching the audio input level (IN LEVEL)
(UTX-B03/P03 only)
Sets the input level according to the audio input device.
You can switch between MIC and LINE. The factory
default setting is MIC.
Note
Do not switch this function to “MIC” when the audio
input source is an audio mixer or other line level device.
If an excessive audio level is input, it may cause noise
distortion or damage the playback/recording equipment.
Setting the microphone drive power
supply (+48V) (UTX-P03 only)
You can supply power from the transmitter when using a
microphone that requires an external power supply.
When set to ON, power is supplied to the connected
microphone and the +48 V indicator starts flashing.
The factory default setting is OFF.
Displaying the accumulated running time
(TIME)
Displays the accumulated running time of the transmitter
as a guide to total usage time.
The factory default setting is 00:00. Up to 99:99 can be
displayed.
To reset the time display
Press and hold the SET button until the time display
starts flashing.
Press the – button to display “00:00 CLR” and press
the SET button.
Pressing the + button when “00:00 CLR” is displayed
causes the time display to start flashing. You can
press the SET button in this state to cancel the reset of
the accumulated running time.
Notes
• This function is displayed in extended mode only.
• The POWER/MUTING button lock state does not
change after switching to simple mode after setting the
button to LOCK in extended mode.
• If the batteries are removed and reinserted while the
POWER/MUTING button is set to LOCK, the power
will turn on automatically but the lock state of the
POWER/MUTING button does not change.
Muting the output (MUTING)
Setting the menu display mode (MENU
MODE)
Sets the menu display mode.
SIMPLE: Displays only the required settings.
ADVANCED: Displays all settings.
Setting the compander mode
(COMPANDER)
Sets the operating mode of the compander.
UWP-D: High speech quality mode supported in
combination with UWP-D series devices.
UWP: Mode supported in combination with Sony UWPseries transmitters.
WL800: Mode supported in combination with Sony 800series transmitters.
Notes
• This function is displayed in extended mode only.
• The correct speech quality may not be achieved or
audio may not be output at all if using a combination of
devices with different compander mode settings.
Locking the POWER/MUTING button
(PWR LOCK)
You can lock the POWER/MUTING button to prevent
the power being turned off inadvertently during
transmission.
UNLOCK: Press and hold the POWER/MUTING button
to turn the power on/off.
LOCK: The power does not turn off, even after pressing
the POWER/MUTING button.
To release the lock state
To release the lock state, either set the PWR LOCK menu
to UNLOCK or use the following procedure.
When the button is in the LOCK state, press and hold
the POWER/MUTING button.
A prompt appears asking you whether to release the
lock state.
Use the + or – button to select YES, then press the
SET button.
The lock state is released.
Pressing the POWER/MUTING button while
transmitting mutes the audio so that audio from the tuner
is not output. Pressing the POWER/MUTING button
again restores the audio output.
ENABLE: Pressing the POWER/MUTING button mutes
the output.
DISABLE: The output is not muted even when the
POWER/MUTING button is pressed.
Notes
• This function is displayed in extended mode only.
• In muting, the audio signal is not output but an RF
signal is still transmitted.
Switching the phase of the microphone
(PHASE) (UTX-B03 only)
You can switch the phase of a connected microphone
(excluding the supplied lavalier microphone) to output
audio in reverse phase.
NORMAL: Phase is not reversed. Set to NORMAL
when the supplied lavalier microphone is connected.
INVERT: Reverses the phase within the transmitter.
Note
This function is displayed in extended mode only.
Setting the battery type (BATTERY)
You can set the type of battery being used in order to
provide a more accurate battery level indication.
TYPE1: Recommended setting when using alkaline LR6
(size AA) batteries. Indicates the battery level based on
the characteristics of new Sony alkaline LR6 (size AA)
batteries.
TYPE2: Recommended setting when using rechargeable
nickel metal hydride batteries.
TYPE3: Recommended setting when using lithium
batteries.
Notes
• This function is displayed in extended mode only.
• The characteristics of batteries change according to
battery type and environmental conditions. It is
recommended that you understand the characteristics of
batteries before using them.
Transmitter Settings
27
Setting the display contrast (CONTRAST)
You can adjust the contrast of text and icons on the
display in the range 1 to 10.
The configurable values are given below.
(Light) 1 2 3 4 5 6 7 8 9 10 (Dark)
Note
This function is displayed in extended mode only.
Restoring factory default settings
(RESET)
Restores all parameters to their factory default settings.
Press and hold the SET button. A prompt appears asking
you whether to restore factory default settings. Press the
+ or – button to select YES, then press the SET button.
The transmitter parameters are restored to their factory
default settings.
Notes
• This function can be used in transmission stopped mode
only.
• After a reset, the audio input level is also restored to its
factory default setting. Note that this may cause the
volume on devices connected to the tuner and in
headphones to suddenly change.
Displaying the software version
(VERSION)
Displays the software version of the transmitter.
Note
This function is displayed in extended mode only.
28
Transmitter Settings
System Configuration Examples
The following are configuration examples for use with UWP-D series devices.
Sample configuration for ENG (Electronic News Gathering) or EFP (Electronic Field Production) with a
camcorder
Portable diversity tuner (URX-P03)
(with shoe mount adapter attached)
or
Hand-held
microphone
(UTX-M03)
Body-pack
transmitter
(UTX-B03)
1 XLR-BMP conversion output cable (supplied)
XDCAM EX/HDV camcorder
(HXR-NX3, etc.)
System Configuration Examples
29
Error Messages
When a problem occurs, one of the following error messages may appear on the display.
30
Message
Meaning
Solution
EEP ERROR
An error has occurred in the backup memory data.
Contact your point of purchase or Sony service
representative.
PLL ERROR
An error occurred in the PLL synthesizer circuit.
Restart the unit. If the message persists, contact your
point of purchase or Sony service representative.
Error Messages
Troubleshooting
If you have any problem, use the following checklist before asking for repairs. If the problem persists, contact your point
of purchase or Sony service representative.
Symptom
Cause
Solution
The unit does not turn The 3 and # polarity orientation of the batteries is Insert the batteries with the correct polarity
on.
incorrect.
orientation.
The batteries are getting low.
Replace the batteries with new ones.
The battery terminals are dirty.
Clean the 3 and # terminals with a cotton swab.
The unit does not turn The POWER/MUTING button is locked.
off.
Release the locked status in the PWR LOCK
menu.
The batteries become The batteries are getting low.
drained quickly.
Manganese batteries are being used.
Replace the batteries with new ones.
Use alkaline batteries. The battery life of a
manganese battery is less than half that of an
alkaline battery.
The device is being used under cold conditions.
The batteries drain quickly under cold conditions.
The channel cannot
be changed.1)
The unit is not in transmission stopped mode.
Turn off the unit, and then turn it on again while
holding down the SET button to switch to
transmission stopped mode.
There is no sound.
The channel setting on the transmitter is different
from that on the tuner.
Use the same channel setting on both the
transmitter and tuner.
The transmitter is not transmitting signals, or the
transmission output is weak.
Confirm that the transmitter is turned on.
Alternatively, reduce the distance between the
transmitter and tuner.
The transmitter is set to line level input.2)
Switch to microphone input.
The compander mode setting on the transmitter is Use the same compander mode setting on both
different from that on the tuner.
the transmitter and tuner.
The transmitter is muted.2)
The sound is weak.
Press the POWER/MUTING button on the
transmitter to release the muted state.
The attenuation level on the transmitter is too high. The input level of the transmitter is low. Set the
attenuation of the transmitter to an appropriate
level.
The volume on the amplifier or mixer is low.
Adjust the volume to an appropriate level.
The transmitter is set to line level input.2)
Switch to microphone input.
The compander mode setting on the transmitter is Use the same compander mode setting on both
different from that on the tuner.
the transmitter and tuner.
The sound is
distorted.
The attenuation level on the transmitter is too low
or is set to 0.
The input level is extremely high. Set the
attenuation on the transmitter so that the audio is
not distorted.
The channel setting on the transmitter is different
from that on the tuner.
Use the same channel setting on both the
transmitter and tuner.
Headphones with a monaural mini jack are being
used.3)
Use headphones with a stereo mini jack.
The compander mode setting on the transmitter is Use the same compander mode setting on both
different from that on the tuner.
the transmitter and tuner.
Troubleshooting
31
Symptom
Cause
Solution
There is sound
interruption or noise.
The channel setting on the transmitter is different
from that on the tuner.
Use the same channel setting on both the
transmitter and tuner.
Two or more transmitters are set to the same
channel.
Two or more transmitters cannot be used on the
same channel. Refer to the frequency list stored
on the supplied CD-ROM, and reconfigure the
channel on each transmitter.
The transmitters are not set to the channels within The channel plan is set so that no signal
the same channel group.
interference occurs when two or more transmitters
are used simultaneously. Set each transmitter to a
different channel within the same channel group.
The RF indicator on
the tuner lights up
even when the
transmitter is off.
Adjacent channels are being used.
Use the channels separated by at least two
channels (250 kHz).
Jamming radio waves are being received.
Set the channel on the tuner to a channel for which
the RF indicator does not light, or use the Clear
Channel Scan function to switch to a channel
without interference. Then, set the transmitter to
the same channel as the tuner.
If using two or more transmitters, change to a
channel group that is not affected.
The transmitter
The infrared receptor on the transmitter is too far
channel cannot be set from the infrared transmission port on the tuner.
with infrared
transmission.
Interference from infrared communications
between other devices or from direct sunlight is
present.
Reduce the distance between the infrared receptor
on the transmitter and the infrared transmission
port on the tuner to within about 20 cm (8 in.).
The transmitting distance is reduced when
interference from strong sunlight, for example, is
present. Place the transmitter and tuner as close
to each other as possible.
1) Body-pack transmitter (UTX-B03) / hand-held microphone (UTX-M03) / plug-on transmitter (UTX-P03) only
2) Body-pack transmitter (UTX-B03) / plug-on transmitter (UTX-P03) only
3) Portable diversity tuner (URX-P03) only
32
Troubleshooting
Important Notes on Use
Specifications
Usage and storage
Design and specifications are subject to change without
notice.
• Operating the UWP-D series devices near electrical
equipment (motors, transformers, or dimmers) may
cause interference due to electromagnetic induction.
Keep the devices as far from such equipment as
possible.
• The presence of lighting equipment may produce
electrical interference over a wide frequency range. In
this case, interference may fluctuate with the position of
the tuner antenna and position of the transmitter.
Position the devices so that interference is minimized.
• To avoid degradation of the signal to noise ratio, do not
use UWP-D devices in noisy places or in locations
subject to vibration, such as the following:
– Near electrical equipment, such as motors,
transformers, or dimmers
– Near air conditioning equipment or places subject to
direct air flow from an air conditioner
– Near PA (public address) loudspeakers
– Near equipment that might knock against the tuner
Keep devices as far from such equipment as possible or
use buffering material.
Cleaning
Clean the surface and the connectors of devices with a
dry, soft cloth. Never use thinners, benzene, alcohol, or
any other chemicals, since these may mar the finish.
To prevent electromagnetic interference
Some channels may be unable to be used due to noise
generated due to the effects of external noise and/or
radio interference. In this case, it is recommended to
stop transmitting (turn the power off) or change to
another frequency (change channel).
To prevent electromagnetic interference from
portable communication devices
The use of portable telephones and other
communication devices near the devices may result in
malfunction and interference with audio signals. It is
recommended that portable communication equipment
near the devices be turned off.
Notes
• Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR AFTER
EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF
ANY KIND MADE BY USERS OF THIS UNIT OR
MADE BY THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE
TERMINATION OR DISCONTINUATION OF
ANY SERVICES RELATED TO THIS UNIT THAT
MAY RESULT DUE TO CIRCUMSTANCES OF
ANY KIND.
Transmitter (UTX-B03/M03/P03)
Items common to all transmitters
Oscillator type Crystal-controlled PLL synthesizer
Carrier frequencies
Model available in USA:
470 MHz to 542 MHz (UC14
model), 566 MHz to 608 MHz and
614 MHz to 638 MHz (UC30
model), 638 MHz to 698 MHz
(UC42 model)
Model available in Europe:
470 MHz to 542 MHz (CE21 model),
566 MHz to 630 MHz (CE33 model),
638 MHz to 694 MHz (CE42 model),
710 MHz to 782 MHz (CE51 model)
Model available in China:
710 MHz to 782 MHz (CN38 model)
Model available in Korea:
925 MHz to 938 MHz (KR Model)
Model available in Thailand and
Taiwan:
794 MHz to 806 MHz (E model)
Preemphasis
50 μs
Reference deviation
±5 kHz (–60 dBV, 1 kHz input)
Distortion
0.9% or less (–60 dBV, 1 kHz input)
Signal-to-noise-ratio
60 dB or more
Important Notes on Use / Specifications
33
Tone signal frequency
In UWP-D compander mode:
32.782 kHz
In UWP compander mode: 32 kHz
In WL800 compander mode:
32.768 kHz
Supply voltage 3.0 V DC (two LR6/AA size alkaline
batteries)
5.0 V DC (supplied from USB
connector)
Operating temperature
0 °C to 50 °C (32 °F to 122 °F)
0 °C to 35 °C (32 °F to 95 °F) when
charging
Storage temperature
–20 °C to +55 °C (–4 °F to +131 °F)
Body-pack transmitter (UTX-B03)
Antenna
1/4 λ wavelength wire antenna
Audio input connector
3.5 mm diameter mini jack
Reference audio input level
–60 dBV (MIC input, 0 dB attenuation)
RF output level 30 mW/5 mW selectable (for model
available in USA, Europe, and
China)
10 mW/2 mW selectable (for model
available in Thailand, Taiwan, and
Korea)
Frequency response
40 Hz to 18 kHz
Attenuation
0 dB to 27 dB (3 dB steps)
Indicators
AUDIO, POWER/MUTING
Battery life (measured with two Sony LR6/AA size
alkaline batteries at 25 °C (77 °F))
Approx. 8 hours with output power of
30 mW (for model available in USA,
and Europe)
Approx. 10 hours with output power of
10 mW (for model available in
Thailand, Taiwan, Korea, and China)
Dimensions
Mass
Approx. 103 g (3.6 oz)
(excluding batteries)
Hand-held microphone (UTX-M03)
Microphone unit
Dynamic
Directional characteristic
Unidirectional
Antenna
1/4 λ wavelength wire antenna
Reference audio input level
–60 dBV (MIC input, 0 dB attenuation)
RF output level 30 mW/5 mW selectable (for model
available in USA, Europe, and
China)
10 mW/2 mW selectable (for model
available in Thailand, Taiwan, and
Korea)
Frequency response
50 Hz to 18 kHz
Attenuation
0 dB to 21 dB (3 dB steps)
Indicator
POWER/MUTING
Battery life (measured with two Sony LR6/AA size
alkaline batteries at 25 °C (77 °F))
Approx. 8 hours with output power of
30 mW (for model available in USA,
and Europe)
Approx. 10 hours with output power of
10 mW (for model available in
Thailand, Taiwan, Korea, and China)
Dimensions
Mass
φ 48 × 260 mm (1 15/16 × 2 3/8 in.)
(Diameter / length)
Approx. 260 g (9.2 oz)
(excluding batteries)
Plug-on transmitter (UTX-P03)
63 × 82 × 20 mm (2 1/2 × 3 1/4 × 13/16 in.)
(Width / height / depth)
(excluding antenna)
34
Specifications
Reference deviation
±10 kHz
Reference audio input level
–60 dBV (at 0 dB attenuation level)
RF output level
50 mW (for model available in USA)
30 mW/5 mW selectable (for model
available in Europe)
10 mW/2 mW selectable (for model
available in Thailand, Taiwan, and
Korea)
Frequency response
50 Hz to 18 kHz
Attenuation
0 dB to 48 dB (3 dB steps)
Audio input connector
XLR-3-11C type (female)
Indicator
AF/PEAK, POWER/MUTING, +48V
Battery life
Approx. 6 hours (measured with two
Sony LR6/AA size alkaline batteries
at 25 °C (77 °F))
Dimensions
Mass
41.5 × 102 × 41.5 mm
(1 11/16 × 4 1/8 × 1 11/16 in.)
(width / height / depth)
(including the audio input connector)
Approx. 145 g (5.1 oz)
(excluding batteries)
Tuner
Portable diversity tuner (URX-P03)
Receive frequencies
Model available in USA:
470 MHz to 542 MHz (UC14
model), 566 MHz to 608 MHz and
614 MHz to 638 MHz (UC30
model), 638 MHz to 698 MHz
(UC42 model)
Model available in Europe:
470 MHz to 542 MHz (CE21 model),
566 MHz to 630 MHz (CE33 model),
638 MHz to 694 MHz (CE42 model),
710 MHz to 782 MHz (CE51 model)
Model available in China:
710 MHz to 782 MHz (CN38 model)
Model available in Korea:
925 MHz to 938 MHz (KR Model)
Model available in Thailand and
Taiwan:
794 MHz to 806 MHz (E model)
Signal-to-noise-ratio
60 dB or more
Deemphasis
50 μs
Reference frequency deviation
±5 kHz
Frequency response
40 Hz to 15 kHz
Distortion
0.9% or less (1 kHz modulation)
Tone signal
In UWP-D compander mode:
32.782 kHz
In UWP compander mode: 32 kHz
In WL800 compander mode:
32.768 kHz
Indicators
POWER, RF
Operating temperature
0 °C to 50 °C (32 °F to 122 °F)
0 °C to 35 °C (32 °F to 95 °F) when
charging
Storage temperature
–20 °C to +55 °C (–4 °F to +131 °F)
Supply voltage 3.0 V DC (two LR6 AA alkaline
batteries)
5.0 V DC (supplied from USB
connector)
Battery life
Approx. 6 hours (Sony alkaline
LR6 AA), 25°C (77 °F))
1/4 λ wavelength wire antenna
(angle-adjustable)
Squelch level 15 dBμ
Audio output level
–58 dBm
Audio output connector
3.5 mm diameter mini jack
Headphone output level
5 mW (16 Ω)
Reception method
Space diversity method
Local oscillator Crystal-controlled PLL synthesizer
Antenna
Specifications
35
Dimensions
Mass
36
Specifications
63 × 82 × 23.8 mm
(2 1/2 × 3 1/4 × 13/16 in.)
(Width / height / depth)
(excluding antenna)
Approx. 136 g (4.8 oz)
(excluding batteries)
Sony Corporation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 7.1
Modify Date                     : 2013:12:20 14:10:33+09:00
Create Date                     : 2013:12:20 13:12:30Z
Metadata Date                   : 2013:12:20 14:10:33+09:00
Format                          : application/pdf
Title                           : UWP-D11/D12/D16
Creator                         : Sony Corporation
Document ID                     : uuid:b3e71334-4ad3-48f2-9c56-81df3d36c99d
Instance ID                     : uuid:467f9057-3c83-4944-b059-8c607c7c4dbb
Page Count                      : 37
Author                          : Sony Corporation

EXIF Metadata provided by EXIF.tools