Sony Group ZSRS60BT Personal Audio System User Manual ZS RS60BT

Sony Corporation Personal Audio System ZS RS60BT

ZS-RS60BT_User manual

ZS-RS60BT_U2 [US] 4-559-901-11(1)4-559-901-11(1)Personal Audio SystemOperating Instructions©2014 Sony Corporation Printed in ChinaZS-RS60BT*   and VOL +  have a tactile dot.The following FCC/IC statement applies only to the version of this model manufactured for sale in the USA and Canada. Other versions may not comply with FCC/IC technical regulations. NOTE:For United States customers. Not applicable in Canada, including in the province of Quebec.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTIONYou are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.This graphical symbol is located on the bottom of the unit.Notice for the customers in CanadaThis device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Personal Audio System is designed to be used for playing back music sources on CDs or USB devices, transferring music to USB devices, listening to radio stations, and listening to music on BLUETOOTH devices.Basic OperationsBefore using the unitTo turn the power on or offPress POWER . You can also turn on the power of this unit using the direct power-on function (below).In this manual, operations are mainly explained using the direct power-on function. To use the direct power-on functionPress CD , USB , BLUETOOTH , FM/AM , AUDIO IN  or FAVORITE RADIO STATIONS (1-3)  while the unit is turned off. The power turns on with the relevant function selected.To adjust the volumePress VOL + or  .To listen through headphonesConnect headphones to the  (headphones) jack .To reinforce the bassPress MEGA BASS .“MEGA BASS” lights up on the display.To return to normal sound, press the button again.Playing a music disc1 Press CD  to turn on the CD function.2 Press PUSH OPEN/CLOSE  , place a disc in the CD compartment and then close the compartment cover.Label side upThe disc is loaded and the disc information appears on the display. Audio CDTotal number of tracksTotal playing timeMP3/WMA discTotal number of folders** If MP3/WMA files are present only in the root directory (“ROOT” folder), “1FLDR” appears on the display.3 Press   to start playback.Track number or MP3/WMA file numberPlaying timeWhen you play an MP3/WMA disc, the folder name*1 and song title are displayed before the playing time*2 appears.*1 If MP3/WMA files are present only in the root directory, “ROOT” appears on the display.*2 If the playing time is longer than 100 minutes, “--:--” appears on the display. Other operationsTo Do thisPause playback Press  . To return to playback, press the button again.Stop playback Press  . When you press   after playback is stopped, playback starts from the point where you stopped playback (Resume Play).Select a folder on an MP3/WMA discPress + or  .Select a track/filePress  or  . You can skip tracks/files one by one.Find a point in a track/fileHold down  or   during playback, and release the button at the desired point. When locating a point while paused, press   to start playback after the desired point is found.TipTo cancel the Resume Play, press   while the CD is stopped.NoteResume Play is cancelled in the following cases:  When you open the CD compartment. When you turn off the power.Example of folder structure and playing orderThe playing order of the folders and files is as follows. However, the playing order may differ from the original order on the disc, depending on the recording method used.FolderMP3/WMA fileNotes on MP3/WMA discs When a disc is loaded, the unit reads all the files on that disc. During this time, “READING” is flashing. If there are many folders or non-MP3/WMA files on the disc, it may take a long time for play to begin or for the next MP3/WMA file to start to play. We recommend that non-MP3/WMA files or unnecessary folders are excluded when creating MP3/WMA discs. During playback, audio files other than MP3 and WMA files are skipped even if those files are included in a folder. The audio formats supported by this unit are as follows: MP3: File extension “.mp3” WMA: File extension “.wma” Note that even if the file name has the correct file extension but the actual file was created in a different audio format, this unit may produce noise or may malfunction. MP3 PRO format is not supported. This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the ID3 tag format for MP3 files, the WMA tag format defined by the ASF specification (Advanced Systems Format) for WMA files, and the AAC tag format for AAC files.When a file has the ID3, WMA or AAC tag information, the song title, artist name, and album name will be displayed. If a file does not have the tag information, the unit displays as follows: File name instead of the song title. “NO ARTIST” message instead of the artist name. “NO ALBUM” message instead of the album name. ID3, WMA and AAC tag information can be displayed up to 64 characters.Transferring music from a disc to a USB deviceYou can transfer a whole disc (CD SYNC transfer) or the currently playing track or file (REC1 transfer) to a USB device (digital music player or USB storage media, etc.).When transferring from a CD, the tracks are transferred as MP3 files with a sampling frequency of 44.1 kHz at 128 kbps (CBR). When transferring from an MP3/WMA disc, MP3/WMA files are transferred with the same bit rate as the original MP3/WMA files.1 Connect the USB device to the (USB) port .2 Press CD  to turn on the CD function.3 Place the disc you want to transfer in the CD compartment. CD SYNC transferTo transfer a whole discProceed to step 4.To transfer MP3/WMA files in a specific folderPress + or   repeatedly to select the folder you want.To transfer only your favorite tracks/filesPerform step 1 to 5 of “Creating your own program (Program Play)” on the back page. REC1 transferTo transfer a single track/fileSelect and start playback of the track/file you want to transfer.4 Press REC .“REC” flashes on the display and the unit starts calculating the amount of free space on the USB device.If “LOW ***M” appears on the display, there is not sufficient space on the device. To cancel the transferring, press  . To continue transferring anyway, proceed to step 5.5 Press ENTER .Transferring starts. When transferring is completed, playback stops automatically (CD SYNC transfer) or proceeds to the next track/file (REC1 transfer).To stop transferringPress  .An MP3/WMA file is created up to the point the transferring was stopped.Folder and file generation rulesWhen first transferring to a USB device, a “MUSIC” folder and its sub folder “SONY” are created directly below the “ROOT” folder.Folders and files are generated within the “CD” folder under the “SONY” folder based on the following rules.CD SYNC transferTransferring source Folder name File nameMP3/WMA Same as the transferring source*1, 2CD-DA “ALBUM001”*3“TRACK001”*4REC1 transferTransferring source Folder name File nameMP3/WMA “REC1”*5Same as the transferring source*2CD-DA “TRACK001”*4*1 In Program Play mode, the folder name is “FLDRxxx,” and the file name depends on the transferring source.*2 A folder name of up to 64 characters can be assigned.*3 Folder names are assigned in sequential order up to a maximum of 999 (including the “ROOT” and “MUSIC” folders).*4 File names are assigned in sequential order.*5 A new file is transferred to the “REC1” folder each time single track transfer is performed.To erase audio files or folders from the USB device1 Press  or   repeatedly to select an audio file, or press + or –  repeatedly to select a folder.2 Press ERASE .“ERASE?” appears on the display.3 Press ENTER .“TRACK ERASE?” or “FOLDER ERASE?” appears on the display.4 Press ENTER .The selected audio file or folder is erased, and “COMPLETE” appears on the display.Notes If you start transferring in shuffle play or repeat play mode, the selected play mode is automatically changed to normal play. Do not remove the USB device during transferring or erase operations. Doing so may corrupt the data on the device or damage the device itself. While transferring, no sound is output and “HI-SPEED” appears on the display. CD-TEXT information is not transferred in the created MP3 files. Transferring stops automatically if: the USB device runs out of space during transferring. the number of audio files and folders on the USB device reaches the limit that the unit can recognize. Non-MP3/WMA/AAC format files or sub folders in the folder are not erased. Radio sound and sound from an optional component cannot be transferred to a USB device.Note on copyright-protected contentThe transferred music is limited to private use only. Use of the music beyond this limit requires permission from the copyright holders. WMA files encoded in WMA DRM, WMA Lossless and WMA PRO formats cannot be played back. This unit cannot play audio files on a disc in the following cases: When the total number of audio files exceeds 999. When the total number of folders on a single disc exceeds 256 (including the “ROOT” folder). When the directory level (folder depths) exceeds 8 (including the “ROOT” folder). Folder names and file names can be displayed with up to 64 characters, including quotation marks. Characters and symbols that cannot be displayed by the unit will appear as “_”. This unit conforms to version 1.0, 1.1, 2.2, 2.3 and 2.4 of the ID3 tag format for MP3 files and the WMA tag format defined by the ASF specification (Advanced Systems Format) for WMA files. When a file has the ID3 or WMA tag information, the song title, artist name, and album name will be displayed. If a file does not have the tag information, the unit displays as follows: File name instead of the song title. “NO ARTIST” message instead of the artist name. “NO ALBUM” message instead of the album name. ID3 and WMA tag information can be displayed up to 64 characters.Listening to music on a USB deviceYou can listen to audio files stored on a USB device (a digital music player or USB storage media).Audio files in MP3, WMA and AAC formats* can be played on this unit.* Files with copyright protection (Digital Rights Management) cannot be played on this unit.1 Connect the USB device to the (USB) port .2 Press USB  to turn on the USB function.The volume label scrolls once, then the total number of folders appears on the display.Total number of folders3 Press   to start playback.The folder name and song title are displayed, and then the file number and playing time appear.File numberPlaying time** If the playing time is longer than 100 minutes, “--:--” appears on the display. Other operationsTo Do thisPause playback Press  . To return to playback, press the button again*.Stop playback Press  . When you press   after playback is stopped, playback starts from the point where you stopped playback (Resume Play).Select a folder Press + or  .Select a file Press  or  . You can skip files one by one.To skip files continuously, hold down  or   and release the button at the desired file.Find a point in a fileHold down  or   during playback, and release the button at the desired point. When locating a point while paused, press   to start playback after the desired point is found.* When playing a VBR MP3/WMA/AAC file, playback may restart from a different point.NoteWhen removing a USB device, always hold down   until “NO DEV” appears on the display. Removing the USB device without performing this step may corrupt the data on the USB device or damage the device itself.Example of folder structure and playing orderThe playing order of the folders and files is as follows. However, the playing order may differ from the original order on the USB device, depending on the recording method used.FolderMP3/WMA/AAC fileUSB deviceNotes on the USB device It may take a long time before playback starts when: the folder structure is complex. the USB device is close to capacity. Do not save non-MP3/WMA/AAC files or unnecessary folders to a USB device that contains MP3/WMA/AAC files. During playback, audio files other than MP3, WMA and AAC files are skipped even if those files are included in a folder. The audio formats supported by this unit are as follows: MP3: file extension “.mp3” WMA: file extension “.wma” AAC: file extension “.m4a,” “.3gp” and “.mp4” Note that even if the file name has the correct file extension but the actual file was created in a different audio format, this unit may produce noise or may malfunction. MP3 PRO format is not supported. WMA files encoded in WMA DRM, WMA Lossless and WMA PRO formats cannot be played back. AAC files encoded in copyright-protected AAC format cannot be played back. This unit supports the AAC-LC (AAC Low Complexity) profile. This unit cannot play audio files on a USB device in the following cases: When the total number of audio files in a single folder exceeds 999. When the total number of audio files on a single USB device exceeds 5,000. When the total number of folders on a single USB device exceeds 256 (including the “ROOT” folder). When the directory level (folder depths) exceeds 8 (including the “ROOT” folder). These numbers may vary depending on the file and folder structure. Compatibility with all encoding/writing software is not guaranteed. If audio files on the USB device were originally encoded with incompatible software, those files may produce noise or interrupted sound, or may not be played back at all. Folder names and file names can be displayed using up to 64 characters, including quotation marks. Characters and symbols that cannot be displayed by the unit will appear as “_”.WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles).To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Excessive sound pressure from earphones and headphones can cause hearing loss.Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.The nameplate is located on the bottom exterior.Owner’s RecordThe model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No. ZS-RS60BT Serial No. Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unused for long periods of time.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.Power SourcesConnect the AC power cord , or insert six LR14 (size C) batteries (not supplied) into the battery compartment . Listening to music wirelessly on a BLUETOOTH deviceUsing the BLUETOOTH connection, you can listen to music from wirelessly connected BLUETOOTH devices such as mobile phones, smartphones, music players, etc. Pairing this unit with a BLUETOOTH deviceBLUETOOTH devices must be “paired” with each other beforehand. Once BLUETOOTH devices are paired, there is no need for pairing again, unless the pairing information is cleared.Choose the pairing method below depending on your device.Pairing with an NFC-incompatible BLUETOOTH device: see Pattern APairing with an NFC-compatible smartphone: see Pattern BPattern APairing with an NFC-incompatible BLUETOOTH deviceKeep the BLUETOOTH device and the unit within 1 meter (39 3/8 in) of each other for this operation.1 Press BLUETOOTH  to turn on the BLUETOOTH function.If no devices have been paired, such as when you press BLUETOOTH  for the first time after you purchase the unit, the unit automatically enters pairing mode, and the BLUETOOTH indicator ( ) and “PAIRING” flash on the display.When pairing with two or more BLUETOOTH devicesHold down BLUETOOTH (–PAIRING)  until two beeps are heard.2 Turn on the BLUETOOTH function of the BLUETOOTH device.3 Perform the pairing procedure on the BLUETOOTH device to detect the unit.4 Select “ZS-RS60BT” shown on the display of the BLUETOOTH device.If “ZS-RS60BT” does not appear on the device’s display, repeat from step 2.5 If Passcode* input is required on the display of the BLUETOOTH device, input “0000.”The BLUETOOTH connection is established. “BTAUDIO” appears on the display.* “Passcode” may be referred to as “Passkey,” “PIN code,” “PIN number,” or “Password.”TipYou can pair up to 8 BLUETOOTH devices. If the 9th BLUETOOTH device is paired, the oldest paired device will be deleted.Notes Pairing mode of the unit is cancelled after about 5minutes, and the BLUETOOTH indicator ( ) flashes. If pairing mode is cancelled while performing this procedure, start over from step 1. The passcode of the unit is fixed as “0000.” The unit cannot be paired with a BLUETOOTH device whose Passcode is not “0000.”Pattern BPairing with an NFC-compatible smartphoneBy just touching the unit with an NFC-compatible smartphone, the unit is turned on and switched to the BLUETOOTH function automatically and then paired and connected to the smartphone. Compatible smartphonesSmartphones with the NFC function built-in (OS: Android™ 2.3.3 or later, excluding Android 3.x)What is “NFC”?NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices.1 Turn on the NFC function of the smartphone.For details, refer to the operating instructions supplied with the smartphone.If your smartphone OS is Android 2.3.3 or later, but earlier than Android 4.1Proceed to step 2.If your smartphone OS is Android 4.1 or laterProceed to step 4.2 Download and install the app “NFC Easy Connect” on the smartphone.“NFC Easy Connect” is an original app by Sony for Android phones, and is available at the Google Play™ Store. Search for “NFC Easy Connect” or scan the following two-dimensional code to download and install the free app. Communication fees are required to download the app.The App may not be available in some countries and/or regions.TipFor some smartphones, One-touch connection may be available without downloading the app “NFC Easy Connect.” In that case, the operation and specifications may be different from the description here. For details, refer to the operating instructions supplied with the smartphone.For the two-dimensional code:Use a two-dimensional code reader app.3 Start the app “NFC Easy Connect” on the smartphone.Make sure that the application screen is displayed.To a wall outletTo AC INAC power cord (supplied)RearNotes Replace the batteries when the OPR/BATT indicator  dims, or when the unit becomes inoperable. Replace all of the batteries with new ones. Before you replace the batteries, be sure to remove any CD and disconnect any USB devices or optional components from the unit. To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet. In standby mode with the AC power cord connected, “STANDBY” appears on the display.4 Touch the unit with the smartphone.Keep touching the smartphone to the N mark  on the unit until the smartphone responds.NoteIf your smartphone screen is locked, the smartphone will not function. Release the lock, then touch the smartphone to the N mark  again.Smartphone responds (unit recognized)Follow the on-screen instructions to establish the connection.When the BLUETOOTH connection is established, “BTAUDIO” appears on the display.Tips If it is difficult to establish the connection, try the following. Activate the app “NFC Easy Connect” and move the smartphone slightly across the N mark  on the unit. If the smartphone is in a case, remove it. Touch the unit with the smartphone again to disconnect. If you have multiple NFC-compatible devices, just touch the smartphone to a different device to switch the connection to that device. For example, when your smartphone is connected with NFC-compatible headphones, just touch the smartphone to the unit to change the BLUETOOTH connection to the unit (One-touch connection switching).Listening to musicCheck the following before operating the unit. The BLUETOOTH function of the BLUETOOTH device is turned on. Pairing has been completed. (See “Pairing this unit with a BLUETOOTH device”.)1 Make the BLUETOOTH connection between the unit and the device.For an NFC-incompatible BLUETOOTH devicePress BLUETOOTH  to turn on the BLUETOOTH function.The last connected device will be connected automatically.For an NFC-compatible smartphoneTouch the smartphone to the N-Mark  on the unit.2 Start playback of an audio source such as music, videos, games, etc., on the device.Refer to the instruction manual of your device for details on playback operations.TipTo adjust the volume, set the volume of the BLUETOOTH device or the smartphone to the moderate level, and then press VOL  or +  on the unit.To terminate a BLUETOOTH connectionDo any of following. Turn off the BLUETOOTH function of the BLUETOOTH device. For details, refer to the operating instructions supplied with the device. Turn off the BLUETOOTH device. Change the function of the unit. Turn off the unit. Touch the unit with the smartphone again to disconnect (NFC-compatible smartphones only).To clear the paired device information1 Hold down ERASE  until “BT RESET” appears on the display.2 Press ENTER .When the paired device information is cleared, “COMPLETE” appears on the display. To cancel the reset operation, press  .Listening to the radio1 Press FM/AM  repeatedly to turn on the radio function and select the band “FM” or “AM.”2 Hold down TUNE + or   until the frequency digits begin to change on the display.The unit automatically scans the radio frequencies and stops when it finds a clear station.If you cannot tune to a station using automatic tuning mode, press TUNE + or   repeatedly to change the frequency step by step.When an FM stereo broadcast is received, “ST” lights up on the display.Tips The unit of frequency of tuned stations is MHz for the FM band and kHz for the AM band. If the stereo FM reception is noisy, press FM MODE  repeatedly until “MONO” appears on the display. You will lose the stereo effect, but the reception will be improved.To improve radio receptionReorient the antenna to improve FM reception.Reorient the unit itself to improve AM reception.Presetting stations to FAVORITE RADIO STATIONSYou can preset up to three favorite stations to FAVORITE RADIO STATIONS (1-3) buttons. Assign one FM or AM program for each button.1 Press FM/AM  repeatedly to turn on the radio function and select the band “FM” or “AM.”2 Tune to the station you want to preset.3 Press and hold the desired FAVORITE RADIO STATIONS (–SET) (1-3) button  until you hear a beep.The tuned station is preset to the selected button of FAVORITE RADIO STATIONS (1-3) and the same number as that of the button will light up on the display.(Example: Presetting FM 87.5 MHz to number )To change the preset stationRepeat steps 1 to 3.The preset station on the button will be replaced by the new one.Listening to preset stations with FAVORITE RADIO STATIONSPress the desired FAVORITE RADIO STATIONS (1-3) button .NoteTo prevent the preset from being changed by mistake, do not hold down the button. If doing so, the preset on the button will be replaced by the currently tuned station.
ZS-RS60BT_U2 [US] 4-559-901-11(1)Using the displayChecking the information of an audio CDPress   twice to cancel Resume Play.The total number of tracks and total playing time appear on the display.Checking MP3/WMA/AAC file informationPress DISPLAY  repeatedly while playing an MP3/WMA file on the disc or an MP3/WMA/AAC file on the USB device.The display changes as follows:Song title ( )*1, 2Artist name ( )*1Album name ( )*1Current file number and playing time*3*1 If the file does not have corresponding ID3, WMA or AAC tag information, the file name, “NO ARTIST,” and “NO ALBUM” scroll on the display instead of the song title, artist name, and album name.*2 The function name is displayed for 2 seconds before the song title appears.*3 The artist name or album name will change to this in a few seconds.Checking the connected BLUETOOTH device namePress DISPLAY  while connecting the BLUETOOTH device.Checking the radio informationPress DISPLAY  repeatedly while listening to the radio.The display changes as follows:Preset number*1, 2  Frequency*1 A preset number is displayed only when you are listening to the preset radio station.*2 The display automatically returns to the frequency display after 2 seconds have elapsed. Selecting play modeYou can set the unit to play tracks or files repeatedly or in random order while a disc/USB device is stopped.Press PLAY MODE  repeatedly.Each time you press the button, the indication changes as follows:Normal play (None)Single repeat ( 1)All repeat ( )Selected folder play ( )*Selected folder repeat play ( , )*Shuffle play ( )Program play (PGM)Program repeat play ( , PGM)* These functions are available only when playing MP3/WMA files on an MP3/WMA disc or MP3/WMA/AAC files on a USB device.Playing tracks/files repeatedly (Repeat Play)You can set the unit to repeatedly play CD-DA tracks on an audio CD, MP3/WMA files on a CD-R/CD-RW disc, or MP3/WMA/AAC files on a USB device in normal and program play modes.1 Press CD  or USB  to turn on the CD or USB function.2 Proceed as follows.To repeat Do thisA single track/file1 Press PLAY MODE  repeatedly until “ 1” appears.2 Press  or   to select a track/file that you want to repeat.3 Press  .All tracks/files 1 Press PLAY MODE  repeatedly until “ ” appears.2 Press  .A selected folder on an MP3/WMA disc or USB device1 Press PLAY MODE  repeatedly until “ ” and “ ” appear.2 Select a folder by pressing + or  .3 Press  .Programmed tracks/files1 Program tracks/files (see “Creating your own program (Program Play)”).2 Press PLAY MODE  until “PGM” and “ ” appear on the display.3 Press  .To cancel Repeat PlayPress   to stop playback, and then press PLAY MODE  repeatedly until “ ” (or “ 1”) disappears from the display.Playing tracks/files in random order (Shuffle Play)You can set the unit to play CD-DA tracks on an audio CD, MP3/WMA files on a CD-R/CD-RW disc or MP3/WMA/AAC files on a USB device in random order.1 Press CD  or USB  to turn on the CD or USB function.2 Press PLAY MODE  repeatedly until “ ” appears on the display.3 Press   to start Shuffle Play.To cancel Shuffle PlayPress   to stop playback, and then press PLAY MODE  repeatedly until “ ” disappears from the display.TipDuring Shuffle Play, you cannot select the previous track/file by pressing  . Creating your own program (Program Play)You can arrange the playing order of up to 25 tracks/files on a disc/USB device.1 Press CD  or USB  to turn on the CD or USB function.2 Press PLAY MODE  repeatedly until “PGM” appears on the display.3 Press  or   to select a track/file.When you want to specify a folder that contains MP3/WMA/AAC files, press + or   first to select a folder, and then press  or   to select a file.Other Operations 4 Press ENTER .The track/file is programmed.The program step number appears, followed by the total playing time.(Example: audio CD)Step numberLast programmed track numberTotal playing time** “--:--” appears when programming an MP3/WMA disc/USB device or when the total playing time is longer than 100 minutes.5 Repeat steps 3 and 4 to program additional tracks/files.6 Press   to start Program Play.The created program remains available until you open the CD compartment or turn off the power of the unit. To play the same program again, press  .NoteIf you try to program 26 tracks/files or more, “FULL” flashes on the display.To display programmed track/file informationAfter creating your own program, you can check information about programmed tracks/files.Press DISPLAY  repeatedly and the display changes as follows:Total number of steps  Last programmed track/file number and the total playing time** “--:--” appears for MP3/WMA discs and USB devices.To cancel Program PlayPress   to stop playback, and then press PLAY MODE  repeatedly until “PGM” disappears from the display.To delete all tracks/files in the current programStop playback, and then press  . “NO STEP” appears and you can create a new program, following the procedure “Creating your own program (Program Play).”Presetting radio stationsYou can store radio stations in the unit’s memory. You can preset up to 30 radio stations, 20 for FM and 10 for AM.1 Press FM/AM  repeatedly to turn on the radio function and select the band “FM” or “AM.”2 Hold down FM/AM  until “AUTO” flashes on the display.3 Press ENTER  to store the station.The stations are stored in memory from lower frequencies to higher ones.If a station cannot be preset automaticallyYou need to preset a station with a weak signal manually.1 Press FM/AM  repeatedly to select a band.2 Tune to the desired station.3 Hold down ENTER  until “FM-xx” or “AM-xx” flashes on the display.(Example: FM)4 Press PRESET + or   until the preset number for the station you want flashes on the display.5 Press ENTER  to store the station.If another station is already assigned to the selected preset number, that station is replaced by the new one.TipThe preset radio stations remain in the unit’s memory even in the following situations.The AC power cord is unplugged.The batteries are removed.Listening to preset radio stations1 Press FM/AM  repeatedly to turn on the radio function and select the band “FM” or “AM.”2 Press PRESET + or   to select a stored preset number for the desired radio station.Using the Sleep TimerYou can set the unit to turn off automatically after a set time has elapsed.1 Press SLEEP .The default setting (“90”) appears and the “SLEEP” indicator lights up on the display.2 Press SLEEP  repeatedly to select the desired setting.Each time you press the button, the duration (in minutes) changes on the display, and the selected setting is confirmed automatically after about 4 seconds.TipYou can check the time left until the unit turns off by pressing SLEEP  again after setting the sleep timer.Connecting optional componentsYou can enjoy the sound from an optional component, such as a portable digital music player, through the speakers of this unit.Be sure to turn off the power of each component before making any connections.For details, refer to the instruction manual of the component to be connected.1 Connect the AUDIO IN jack  to the line output jack of the portable digital music player or other component using an audio connection cable (not supplied).2 Turn the connected component on.3 Press AUDIO IN  and start playing sound on the connected component.The sound from the connected component is output from the speakers.To connect the unit to a TV or video recorder/player, use an extension cable (not supplied) with a stereo-mini jack on one end and two phono plugs on the other end.Additional InformationCompatible devicesCompatible USB devicesCompatibility requirements for the USB devices are as follows. Before using a device with this unit, check that it meets the requirements. Compliance with USB 2.0 (Full Speed) Supports Mass Storage mode** Mass Storage mode is a mode that allows a USB device to become accessible to a host device, enabling file transfers. Most USB devices support Mass Storage mode.Notes on the USB device When a USB device is connected, the unit reads all the files on the device. If there are many folders or files on the device, it may take a long time for the unit to finish reading them. Do not connect a USB device to the unit through a USB hub. With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this unit. This unit may not support all the functions provided with a connected USB device. The playback order on this unit may differ from the playback order on a connected USB device. Compatible BLUETOOTH devicesCompatibility requirements for the devices are as follows. Before using a device with this unit, check that it meets the requirements. Devices must conform to BLUETOOTH Standard version 2.1 + EDR. Devices must support A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile). NFC capability (required only when using the NFC pairing function of the unit).For the latest information on compatible BLUETOOTH devices, including NFC-compatible smartphones, check the websites below.For customers in the USA:http://esupport.sony.comFor customers in Canada:(English)http://sony.ca/support(French)http://fr.sony.ca/supportWhat is BLUETOOTH wireless technology?BLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera. BLUETOOTH wireless technology operates within a range of about 10 m (33 feet).Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket.BLUETOOTH standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide.Maximum communication rangeMaximum communication range may shorten under the following conditions. There is an obstacle such as a person, metal, or wall between the unit and BLUETOOTH device. A wireless LAN device is in use near the unit. A microwave oven is in use near the unit. A device that generates electromagnetic radiation is in use near the unit. The unit is placed on a shelf made of steel.Optimal performanceLimited performanceThe unitSteel cabinetInterference from other devicesBecause BLUETOOTH devices and wireless LAN (IEEE802.11b/g/n) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if the unit is used near a wireless LAN device. In such a case, perform the following. Use the unit at least 10 m (33 feet) away from the wireless LAN device. If the unit is used within 10 m (33 feet) of a wireless LAN device, turn off the wireless LAN device. Use the BLUETOOTH device as close to the unit as possible.Interference to other devicesMicrowaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off the unit and other BLUETOOTH devices in the following locations, as it may cause an accident. where inflammable gas is present, in a hospital, train, airplane, or a gas station near automatic doors or a fire alarmNotes To be able to use the BLUETOOTH function, the BLUETOOTH device to be connected requires the same profile as the unit’s.Note also that even if the same profile exists, devices may vary in function depending on their specifications. Due to the characteristic of BLUETOOTH wireless technology, the sound played on the unit is slightly delayed from the sound played on the BLUETOOTH device during listening to the music. This unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using BLUETOOTH wireless technology. We do not take any responsibility for the leakage of information during BLUETOOTH communication. A device featuring the BLUETOOTH function is required to conform to the BLUETOOTH standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned BLUETOOTH standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. Noise or sound skips may occur depending on the BLUETOOTH device connected with the unit, the communication environment or the usage environment.MP3/WMA/AAC files cannot be played back. The audio files may have inappropriate file extensions. The file extensions supported by this unit are as follows: MP3: file extension “.mp3” WMA: file extension “.wma” AAC: file extension “.m4a,” “.3gp” and “.mp4” The audio files may have been created in formats other than MP3/WMA/AAC formats. The USB storage device uses a file system other than FAT16 or FAT32.* The files are encrypted or protected by passwords.* This unit supports FAT16 and FAT32, but some USB storage media may not support both file systems. For details, refer to the operation manual of the USB storage device in question or contact the manufacturer.BLUETOOTH deviceThere is no sound. Make sure that this unit is not too far from the BLUETOOTH device (or smartphone), or that this unit is not receiving interference from a wireless LAN, another 2.4 GHz wireless device, or a microwave oven. Check that the BLUETOOTH connection was completed properly between this unit and the BLUETOOTH device (or smartphone). Perform pairing again (See “Pairing this unit with a BLUETOOTH device”). Keep away from metal objects or surfaces. Make sure that the BLUETOOTH function is activated on the BLUETOOTH device (or smartphone).The sound skips or the correspondence distance is short. If a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device(s), or a microwave oven is nearby, move away if possible. Or use the device and the unit away from such sources. Remove any obstacle between this unit and the device or move the device and the unit away from the obstacle. Locate this unit and the device as close to each other as possible. Re-position this unit. Try using the BLUETOOTH device or smartphone in another position.A connection cannot be established. Depending on the device to be connected, it may require some time to start communication. Perform pairing again (See “Pairing this unit with a BLUETOOTH device”). Check that the BLUETOOTH device is compatible with this unit. For the latest information on compatible BLUETOOTH devices, check the information on the website. The URL is listed under “Compatible BLUETOOTH devices.”Pairing fails. Bring the BLUETOOTH device closer to the unit. Delete the model name of this unit from the BLUETOOTH device and perform pairing again (See “Pairing this unit with a BLUETOOTH device”). Check that the BLUETOOTH device is compatible with this unit. For the latest information on compatible BLUETOOTH devices, check the information on the website. The URL is listed under “Compatible BLUETOOTH devices.”Pairing using the NFC function fails. Try pairing manually (See “Pairing this unit with a BLUETOOTH device”). Some NFC-compatible smartphones may not be paired using the NFC function of this unit, depending on the features or specifications of the device. Relaunch “NFC Easy Connect” and move the smartphone slowly over the N mark . Check that the smartphone meets the compatibility requirements (See “Compatible smartphones”).RadioThe sound is weak or reception is poor. Replace all the batteries with new ones. Move the unit away from nearby TVs. For FM reception, extend the antenna to its full length, and reorient it for best FM reception. For AM reception, reorient the unit itself to find the best reception. If you are in a building, listen near a window. If a mobile phone is placed close to the unit, a loud noise may be heard from the unit. Keep the phone away from the unit.The TV picture is unstable. If you are listening to an FM program near a TV with an indoor antenna, move the unit away from the TV.After trying the suggested remedies, if the problem persists, unplug the AC power cord or remove all the batteries. After all the indications on the display disappear, plug in the AC power cord again, or re-insert the batteries. If the problem persists, consult your nearest Sony dealer.PrecautionsDiscs that this unit CAN play Audio CD (CD-DA*1 tracks) CD-R/CD-RW that contains MP3/WMA files and is finalized*2 correctly.*1 CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for audio CDs.*2 Finalizing is the process to make the CD-R/CD-RW discs playable on the consumer disc player products, and the finalizing can be enabled or disabled as optional settings during disc creation in most recording software.Discs that this unit CANNOT play CD-R/CD-RW other than those recorded in audio CD format or formats conforming to ISO9660 Level 1/Level 2 or Joliet CD-R/CD-RW of poor recording quality, CD-R/CD-RW with scratches or that is dirty, or CD-R/CD-RW recorded using an incompatible recording device CD-R/CD-RW that is unfinalized or finalized incorrectlyNotes on discs Clean the CD with a cleaning cloth if the disc is dirty. Wipe the disc from the center out. If there are scratches, dirt or fingerprints on the disc, a tracking error may occur. Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose the CD to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. Do not stick paper or a sticker on the CD, or scratch the surface of the CD. After playing, store the CD in its case.Note on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.On safety As the laser beam used in the CD player section is harmful to eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. Should any solid object or liquid fall into the unit, unplug the unit, and have it checked by qualified personnel before operating it any further. Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs.On power sources For AC operation, use the supplied AC power cord; do not use any other cord.  Unplug the unit from the wall outlet if it is not to be used for an extended period of time. When not using the batteries, remove them to avoid damage that can be caused by battery leakage or corrosion.On placement Do not leave the unit in a location near heat sources, in a place subject to direct sunlight, excessive dust or mechanical shock, or in a car subject to the direct rays of the sun. Do not place the unit on an inclined or unstable surface. Do not place anything within 10 mm (13/32 in) of the rear of the cabinet. The ventilation openings must be unobstructed for the unit to operate properly and prolong the life of its components. Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring-wound watches away from the unit to prevent possible damage from the magnet.On operation If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. Should this occur, the unit will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate.On handling the unit Do not leave the CD compartment open to avoid dust and debris contamination.On cleaning the cabinet Clean the cabinet, panel and controls using a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine.If you have any questions or problems concerning your unit, consult your nearest Sony dealer. SpecificationsAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION(The United States model only)With 6-ohm loads, both channels driven from 150Hz  10,000Hz; rated 1.5W per channel-minimum RMS power, with no more than 10% total harmonic distortion in AC operation.CD player sectionSystemCompact disc digital audio systemLaser diode propertiesEmission duration: ContinuousLaser output: Less than 44.6μW(This output is the value measurement at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7mm aperture.)Number of channels2Frequency response20Hz  20,000Hz +1/–2dBWow and flutterBelow measurable limitBLUETOOTH sectionCommunication SystemBLUETOOTH Specification Version 2.1 + EDROutputBLUETOOTH Specification Power Class 2 Maximum communication rangeLine of sight approx. 10 m (33 feet)*1Frequency band2.4GHz band (2.4000 GHz  2.4835 GHz)Modulation methodFHSSSupported BLUETOOTH Profiles*2A2DP (Advanced Audio Distribution Profile)AVRCP*3 (Audio/Video Remote Control Profile)Supported codec*4SBC (Subband Codec)*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial performance, operating system, application software, etc.*2 BLUETOOTH standard profiles provide the specifications for BLUETOOTH communication between devices.*3 Some operations may not be available depending on the device.*4 Codec: Audio signal compression and conversion format.Radio sectionFrequency rangeFM: 87.5 MHz  108 MHz (100 kHz step)AM: 530 kHz  1,710 kHz (10 kHz step)Intermediate frequencyFM: 128kHzAM: 45kHzAntennasFM: Telescopic antennaAM: Built-in ferrite bar antennaInputAUDIO INStereo mini jack (USB) portType A, maximum current 500mA, USB 2.0 Full Speed compatibleOutput (headphones) stereo mini jackFor 16  32 impedance headphonesSupported audio formatsSupported bit ratesMP3 (MPEG 1 Audio Layer-3):32kbps  320kbps, VBRWMA:48kbps  192kbps, VBRAAC*:8kbps  320kbps, VBR* USB function onlySampling frequenciesMP3 (MPEG 1 Audio Layer-3):32/44.1/48kHzWMA:32/44.1/48kHzAAC*:32/44.1/48kHz* USB function onlyGeneralSpeakerFull range, 8cm (3 1/4 in) dia., 6, cone type (2)Power output2.0W + 2.0W (at 6, 10% harmonic distortion)Power requirements120 V AC, 60 Hz (AC power supply)9 V DC (6 LR14 (size C) batteries)Power consumption15W0.9W (during standby mode)Battery Life*1, *2Playback of CDApprox. 9 hoursPlayback of USB deviceApprox. 11 hours (at 100 mA load)Approx. 3 hours (at 500 mA load)FM receptionApprox. 26 hoursBLUETOOTHApprox. 13 hours*1 Measured by Sony standards. The actual battery life may vary depending on the circumstances of the unit or operating conditions.*2 When using Sony alkaline batteries.DimensionsApprox. 320mm × 133mm × 215mm (12 5/8in × 5 1/4in × 8 1/2in) (W/H/D) (incl. projecting parts)MassApprox. 2.3 kg (5 lb 1 1/8 oz) (incl. batteries)Supplied accessoriesAC power cord (1)Design and specifications are subject to change without notice.TroubleshootingGeneralThe power does not turn on. Make sure the AC power cord is connected to the wall outlet securely. Make sure the connector of AC power cord is inserted into the AC IN jack securely. Check if the batteries are inserted correctly, matching the polarities. Replace all the batteries with new ones when the OPR/BATT indicator  dims.There is no sound. Make sure the appropriate function is selected for the music or sound source you want to listen to. Unplug the headphones when listening through speakers.The sound is noisy. Is someone using a mobile phone or other equipment emitting radio waves near the unit? If so, move the unit and the BLUETOOTH device away from such devices. Devices such as mobile phones, etc., can affect BLUETOOTH communication.CD/MP3/WMA playerThe CD player does not play even when a CD is in place. Place the CD with the label side up. Clean the CD. Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. The CD-R/CD-RW is blank or unfinalized. There are no playable MP3/WMA files on the disc. There is a problem with the quality of the CD-R/CD-RW, recording device or application software. Replace all the batteries with new ones when the OPR/BATT indicator  dims.“NO CD” appears when the disc is loaded. No disc is set in the CD compartment. Set a disc. The CD may have a reading problem. Replace the disc. The CD may be placed upside down. Place the disc with the label side up. An unplayable disc (BD, etc.) is loaded. Replace the disc.“NO TRACK” flashes on the display when the disc is loaded. No audio files recorded in supported formats, or a file to be played back has an unsupported file extension.“DISC ERR” appears when the disc is loaded. The CD may be dirty. Clean the disc. The CD may have scratches. Replace the disc. An unplayable disc (DVD, etc.) is loaded. Replace the disc. The CD may have a reading problem. Replace the disc. A blank disc may be set in the CD compartment.The sound drops out. Reduce the volume. Clean the CD, or replace it if the CD is badly damaged. Place the unit in a location free from vibrations. Clean the lens with a commercially available blower. The sound may drop out or noise may be heard when using a poor quality CD-R/CD-RW or if there is a problem with the recording device or application software.Starting playback takes more time than usual. The following discs take a longer time to start playback. A disc recorded with a complicated tree structure. A disc that has many folders or non-MP3/WMA files.USB deviceThe USB device does not work properly. If you connect an incompatible USB device, the following problems may occur. The USB device is not recognized. File or folder names are not displayed on this unit. Playback is not possible. The sound skips. There is noise. The sound output is distorted.“OVER CURRENT” appears. An abnormal level has been detected in the electrical current from the  (USB) port . Turn off the unit and remove the USB device from the  (USB) port . Make sure there is no problem with the USB device. If this message persists, contact your nearest Sony dealer.There is no sound. The USB device may be connected incorrectly. Turn off the unit and reconnect the USB device. Then turn on the unit.There is noise, skipping, or distorted sound. Turn off the unit and reconnect the USB device. Then turn on the unit again. The music data itself contains noise, or the sound is distorted. Noise may have entered during the creation of audio files. Try re-creating audio files and use them to play on this unit.The USB device cannot be connected to the  (USB) port . The connector on the USB device or the USB cable is being inserted backwards. Insert it to the  (USB) port  in the correct direction.“READING” is displayed for an extended time, or it takes a long time before playback starts. The reading process can take a long time in the following cases: There are many folders or files on the USB device. The file structure is complex. The memory is almost full. The internal memory is fragmented. To avoid the above problems, we recommend that you adhere to the following guidelines: Keep the total number of folders on a USB device to 100 or less. Keep the total number of files per folder to 100 or less.Erroneous display The data stored on the USB device may be corrupted. Send the music data to the USB device again. This unit can display only numbers and letters of the alphabet. Other characters will not be displayed correctly.“REC ERROR” appears. An error occurred during transferring. Turn off the unit and remove the USB device from the unit. Then check the following: Check the remaining storage space on the USB device. If there is insufficient space for the transferring, delete any unnecessary files or folders. Check that the data to be transferred is not corrupted. Check that the file format to be transferred is compatible with the unit. If the message still persists, contact your nearest Sony dealer.The USB device is not recognized. Turn off the unit and reconnect the USB device, then turn on the unit. The USB device is not functioning properly. Refer to the USB device operation manual for details on how to deal with this problem.Play does not start. Turn off the unit and reconnect the USB device.Play does not start from the first track. Set the play mode to Normal Play.License and Trademark Notice MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. The BLUETOOTH word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. Android™ and Google Play™ are trademarks of Google Inc. Other trademarks and trade names are those of their respective owners. In this manual, ™ and ® marks are not specified.For customers in the USAPlease register this product on line at the following website.http://www.sony.com/productregistrationProper registration will enable us to send you periodic mailings about new product, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you.

Navigation menu