Sony 10720X GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC User Manual Startup Guide

Sony Mobile Communications Inc GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC Startup Guide

Startup Guide

Download: Sony 10720X GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC User Manual Startup Guide
Mirror Download [FCC.gov]Sony 10720X GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n and NFC User Manual Startup Guide
Document ID3336262
Application IDwkJpktFmZ0QSN0IzZz7OZg==
Document DescriptionStartup Guide
Short Term ConfidentialYes
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize23.83kB (297931 bits)
Date Submitted2017-03-28 00:00:00
Date Available2017-09-26 00:00:00
Creation Date2017-12-27 19:01:27
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-12-27 19:01:27
Document TitleStartup Guide
Document CreatorAH XSL Formatter V6.4 MR1 for Windows (x64) : 6.4.3.27525 (2017/01/23 10:11JST)

Device basics
Charging/Notiication light
NFC
Volume/Zoom key
Power key
Nano SIM/Memory card slot
Charger/USB Type-C™ cable port
To insert the nano SIM card and the
memory card
Do not cut your SIM card, for example using a blade or
scissors, as this may damage your device.
1 Open the nano SIM/Memory card slot cover.
2 Using your ingernail, drag out the nano SIM card tray.
3 Firmly place the SIM card in the correct orientation as
shown in the illustration.
4 Insert the memory card in the correct orientation into its
slot as shown in the illustration.
5 Gently push the tray back into the slot until it its into
place.
To turn on the device
It is important to use the USB Type-C™ cable (provided)
when charging your device as other types of USB cables
can damage your device. It is recommended to charge
the battery for at least 30 minutes before you turn on the
device for the irst time.
1 Press and hold down the power key
until the device
vibrates.
2 Wait a moment for the device to start.
To activate the screen
• Briely press the power key
Screen protection
Before using your device, remove the protection ilm by
pulling up on the protruding tab.
Screen covers and protectors may help you protect your
device against damage. We recommend you use only those
screen covers intended for your Xperia™ device. The use of
third party screen protection accessories may prevent your
device from working correctly by covering sensors, lenses,
speakers, or microphones and can invalidate the warranty.
Support for you
Access our support website directly on your device or visit
support.sonymobile.com with any supported browser.
Support options include User guides, downloadable content,
troubleshooting tips and contact information.
Even if you don’t have a network connection, you can
access support contact information on your device.
Depending on the country or region where you purchased
your device, you can ind this information directly in the
Support application.
To access the Support application
1 From your Home screen, tap
2 Find and tap
Connect to the internet when using the Support
application for the best available support.
Warranty, SAR and usage guidelines
For information about warranty, SAR (Speciic Absorption
Rate) and safety guidelines, please read the Important
information provided under Settings > About phone > Legal
information on your device.
Transferring contacts and content
If you need help to transfer contacts, messages, photos or
other data from an old device to your new device, we
recommend that you use the Xperia™ Transfer application.
Visit www.sonymobile.com/xperiatransfer for more
information.
To view the CE marking and the FCC ID
Open the nano SIM/Memory card slot cover.
Using your ingernail, drag out the nano SIM card tray.
Remove the memory card from its slot.
Drag out the label strips simultaneously, as shown in the
illustration. To see the full text of the EU declaration of
conformity, visit: http://www.compliance.sony.de/.
5 To view the FCC ID, turn the device over. The FCC ID is
displayed on the other side of the label strips.
Make sure to drag both label strips simultaneously to avoid
tearing them.
To view the regulatory compliance mark
• Open the phone dialer, then enter *#07#.
Legal information
Publication number: 1307-9621.1
This Startup guide is published by Sony Mobile Communications Inc. or its local afiliated company, without
any warranty. Improvements and changes to this Startup guide necessitated by typographical errors,
inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony
Mobile Communications Inc. at any time and without notice. Such changes will, however, be incorporated
into new editions of this Startup guide. All illustrations are for illustration only and may not accurately depict
the actual device.
See regulatory information such as the device CE marking in the relevant label tray in the device.
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved. Visit www.sonymobile.com/globalen/legal/ for more information.
Manufacturer: Sony Mobile Communications Inc., 4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo,
140-0002 Japan. For EU product compliance: Sony Belgium, bijkantoor van Sony Europe Limited, Da
Vincilaan 7-D1, 1935 Zaventem, Belgium.
© 2017 Sony Mobile Communications Inc. All rights reserved.
Supported frequency bands
Some frequency bands might be turned off in certain markets or by certain operators.
G3311
UMTS HSPA+ (1, 2, 5, 8) GSM GPRS/EDGE (850, 900, 1800, 1900) LTE (Bands 1, 2, 3, 5, 7, 8, 20) WLAN,
2.4G/5G, NFC
G3313
UMTS HSPA+ (1, 2, 4, 5, 8) GSM GPRS/EDGE (850, 900, 1800, 1900) LTE (Bands 2, 4, 5, 7, 12, 17, 28)
WLAN, 2.4G/5G, NFC
Startup guide
G3311/G3313
Sony Mobile Communications Inc.
4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo, 140-0002 Japan
1307-9621.1

Source Exif Data:

EXIF Metadata provided by EXIF.tools
FCC ID Filing: PY7-10720X

Navigation menu