Sony AD022042 Licensed Transmitter User Manual V630i KRH label TYPE AAD 3022042 BV Made in

Download:
Mirror Download [FCC.gov]
Document ID	672313
Application ID	jzWfWlIpk6QERzE5JoBYcg==
Document Description	01 Label
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.95kB (299382 bits)
Date Submitted	2006-06-22 00:00:00
Creation Date	2006-06-23 00:40:15
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-06-23 00:41:51
Document Title	V630i, KRH-label, TYPE: AAD-3022042-BV, Made in...
Document Creator	Acrobat PDFMaker 7.0.7 für Word
Document Author:	SEM/BGUDBB, Niklas Lövberg

1 (3)
Company Internal
MARKING DRAWING
Prepared (also subject responsible if other)
No.
SEM/BGUDBB, Niklas Lövberg
Approved
151 86–SVV 107 447/1 Uen
Checked
SEM/BGUDBB (Niklas Lövberg)
Date
Rev
2006-06-22
Reference
Approved according to 000 21–LXE 107 42/1
V630i, KRH-label, TYPE: AAD-3022042-BV, Made in...
General information
The format of the label is based on a label SVF 930 2406 (40,4 x 31,4 mm).
If applicable, or nothing else specified, Zebra printer Scaleable Smooth
Font CG Triumvirate Bold Condensed is imposed. When needed, the text is
adjusted to fit the label.
All bar codes, when applicable, are according to Ericsson corporate
standard 102 01–109 Uen. All bar codes shall fulfil minimum print quality C
according to ANSI X3.182-1990 as stated in Ericsson corporate standard
102 01–1003 Uen. No bar codes are allowed to be closer to a label edge than
2 mm! (quiet zone).
“(x/y)” under each line number specifies the bottom / left alignment for text,
graphics and bar codes, x is measured vertically, and y horizontally from the
upper left corner of the label (landscape format), both in mm. When needed,
the alignment is adjusted to fit the label.
The label shall be placed on the back of the telephone according to the
Assembly Drawing (151 88-) for the KRH.
Printing information
Content
Line 1
(1,0/29,0)
SIM-card logo
Line 2a
Sony Ericsson stylized name.
(20,7/1,0)
Line 2b
Model name, “V630i”
(20,2/18,0)
Product number of the DPY kit in
Line 2c
which the phone is packed. Printed
(20,2/23,0) without R-state,
“DPY 101 0000/000”
Line 3a
Type number of the phone (KRH),
(22,2/1,0)
“Type: AAD-3022042-BV”.
Line 3b
HW & SW fields,
(22,2/18,0) “FG”
Format
Graphics, height 7,3 mm.
According to 1424-SVF 930 1418.
Rotated 90° Clockwise.
Graphics, height 2,0 mm.
According to 190 89–EN/LZT 108 5347
Text, height 1,2 mm.
Text, height 1,2 mm.
Text, height 1,2 mm.
Text, height 1,2 mm.
According to the 3/151 86- document in
the 1095- for the SVV.
2 (3)
Company Internal
MARKING DRAWING
Prepared (also subject responsible if other)
No.
SEM/BGUDBB, Niklas Lövberg
Approved
151 86–SVV 107 447/1 Uen
Checked
SEM/BGUDBB (Niklas Lövberg)
Line 3c
(22,2/24,0)
Line 3d
(22,2/27,5)
Line 3e
(22,2/34,0)
Line 4a
(24,0/1,0)
Line 4b
(24,0/15,0)
Line 5
(26,5/1,0)
Line 6a
(28,0/1,0)
Date
Rev
2006-06-22
Content
Location code of where the phone
is flashed, if applicable,
“FFF”
Production week (flash), “yy’W’ww”
(yy = year, ww = week)
Repair week, if applicable.
“Ry’W’ww”
(y = year, ww = week)
Country approval mark 1
“FCC ID: PY7AD022042”
Country approval mark 2
“IC: 4170B-AD022042”
Line 6a in bar code.
As desired by supplier (e.g. only
actual number).
Supplier’s identification for traceability of the telephone, as desired
by supplier (e.g. “S/N: nnn….” for
serial number).
Actual electronic serial number
Line 6b
(IMEI) of the phone (KRH),
(28,0/13,0)
“00000000-000000-0”
Line 6c
CE approval symbol.
(28,0/28,5)
Line 6d
The Notified body number.
(28,0/35,3) “0682”
Line 7a
(30,2/1,0)
Line 6b in bar code (only actual
number, without data identifier).
Marking of origin.
Line 7b
The line shall be printed as stated
(30,2/27,0)
in chapter 3 in this document.
Reference
Format
Text, height 1,2 mm.
According to 1050-LZT 108 6537.
Text, height 1,2 mm.
Text, height 1,2 mm.
Text, height 1,2 mm.
Text, height 1,2 mm.
Bar code, height 2,0 mm.
As desired by supplier (e.g. Code 128
symbology).
Text, height 1,2 mm.
Defined by supplier.
Text, height 2,0 mm.
In the format TAC-SNR-CD.
TAC and SNR derived from the
3/151 86- document in the 1095- for the
SVV.
CD = check digit according to the Luhn
formula (ISO/IEC 7812), GSM 02.16.
Graphics, height 5 mm.
According to 1424-SVF 930 52.
Text, height 2,0 mm.
Bar code, height 2,0 mm.
Code 128 symbology, code C subset. If
uneven number of digits, code B subset
shall be used for the last digit.
Text, height 1,2 mm.
3 (3)
Company Internal
MARKING DRAWING
Prepared (also subject responsible if other)
No.
SEM/BGUDBB, Niklas Lövberg
Approved
151 86–SVV 107 447/1 Uen
Checked
SEM/BGUDBB (Niklas Lövberg)
Marking of Origin
3.1
Content
Date
Rev
2006-06-22
Reference
“Made in Xxx”;
“Xxx” = actual country of production of the included telephone, in English
Layout
The conceptual picture (for Zebra 90XiII printer, or equivalent) should not be
considered as specifications, but as an additional help for setting up the label.
4.1
Conceptual picture
double underlined = major changes since last revision.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : Acrobat PDFMaker 7.0.7 für Word
Modify Date                     : 2006:06:23 00:41:51+02:00
Create Date                     : 2006:06:23 00:40:15+02:00
Metadata Date                   : 2006:06:23 00:41:51+02:00
Format                          : application/pdf
Title                           : V630i, KRH-label, TYPE: AAD-3022042-BV, Made in...
Creator                         : SEM/BGUDBB, Niklas Lövberg
Document ID                     : uuid:3a5fc1bc-db76-4dd1-a0ba-2a486956d4cb
Instance ID                     : uuid:74ee839c-cc90-4c16-9acc-424b8b3e46af
Prepared                        : SEM/BGUDBB, Niklas Lövberg
Template Version                : R1A
Template Name                   : Sony Ericsson StandardPortrait
Document Type                   : StandardPortrait
Revision                        : C
Distribution                    : Distribution
Tag X                           : 0
Information                     : Information
Date                            : 2006-06-22
File Path                       : False
Security Class                  : Company Internal
Size                            : StandardA4
Language                        : Language
Company                         : Sony Ericsson Mobile Communications AB
Comments                        : 151 86–SVV 107 447/1 Uen.Rev C
Head Style                      : HeadStyle
Source Modified                 : D:20060622224006
Doc No                          : 151 86–SVV 107 447/1 Uen
Keyword                         : V630i, KRH-label, TYPE: AAD-3022042-BV, Made in...
Approved By                     : SEM/BGUDBB (Niklas Lövberg)
Page Count                      : 4
Page Layout                     : OneColumn
Author                          : SEM/BGUDBB, Niklas Lövberg

EXIF Metadata provided by EXIF.tools