Sony DDA-2013 Bluetooth headset User Manual Grover HBH GV435a HBH products folded
Sony Mobile Communications Inc Bluetooth headset Grover HBH GV435a HBH products folded
Sony >
08 user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 855200 |
| Application ID | R80eVuluhtcBa+RuIyx1vg== |
| Document Description | 08 user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 167.77kB (2097122 bits) |
| Date Submitted | 2007-10-16 00:00:00 |
| Date Available | 2007-10-16 00:00:00 |
| Creation Date | 2000-09-20 09:32:31 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2007-08-22 12:30:11 |
| Document Title | Grover_HBH-GV435a_HBH_products_folded.fm |
| Document Creator | FrameMaker 7.1 |
| Document Author: | Sony Ericsson Mobile Communications AB |
Bluetooth™ Headset HBH-GV435a English Language Language Language Bluetooth™ Headset HBH-GV435a User Guide User Guide User Guide User Guide Sony Ericsson HBH-GV435a This manual is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. All rights reserved. ©Sony Ericsson Mobile Communications AB, 2007 Publication number: 1202-4342.P1C Some of the services in this manual are not supported by all networks. This also applies to the GSM International Emergency Number 112. Contact your network operator or service provider if you are in doubt whether you can use a particular service or not. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Ericsson is under license. This product is leadfree and halogenfree. Introduction Introduction Introduction Introduction Bluetooth™ Headset HBH-GV435a The Bluetooth™ Headset HBH-GV435a can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. Bluetooth™ Headset HBH-GV435a The Bluetooth™ Headset HBH-GV435a can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. Bluetooth™ Headset HBH-GV435a The Bluetooth™ Headset HBH-GV435a can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. Bluetooth™ Headset HBH-GV435a The Bluetooth™ Headset HBH-GV435a can be connected to any device with Bluetooth wireless technology that supports the handsfree or headset profile. This user guide focuses on usage with a Sony Ericsson mobile phone. Q Call handling button Call handling button Call handling button Call handling button Indicator light (LED) Indicator light (LED) Indicator light (LED) Indicator light (LED) Decrease volume Decrease volume Decrease volume Decrease volume Increase volume Increase volume Increase volume Increase volume Power button Power button Power button Power button Microphone Microphone Microphone Microphone R Charging connector Charging connector Charging connector Charging connector Speaker Speaker Speaker Speaker S User Guide symbols User Guide symbols User Guide symbols User Guide symbols Press and release Press and release Press and release Press and release Press twice within 1/2 second Press twice within 1/2 second Press twice within 1/2 second Press twice within 1/2 second Press and hold Press and hold Press and hold Press and hold Press and hold simultaneously Press and hold simultaneously Press and hold simultaneously Press and hold simultaneously Steady red light Steady red light Steady red light Steady red light Steady green light Steady green light Steady green light Steady green light User Guide symbols (continued) User Guide symbols (continued) User Guide symbols (continued) User Guide symbols (continued) Red flash Red flash Red flash Red flash Green flash Green flash Green flash Green flash Beep tone Beep tone Beep tone Beep tone Ring signal Ring signal Ring signal Ring signal First time use: Charge until the LED turns green. First time use: Charge until the LED turns green. First time use: Charge until the LED turns green. First time use: Charge until the LED turns green. U Getting started Getting started Getting started Getting started Charging Charging Charging Charging Charging Charging Charging Charging Fully charged Fully charged Fully charged Fully charged Battery needs charging Battery needs charging Battery needs charging Battery needs charging Adding the headset to the phone Adding the headset to the phone Adding the headset to the phone Adding the headset to the phone 20 cm Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions from the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Turn on Bluetooth visibility in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 14. 4. If your phone supports auto pairing, press YES when Add device? appears in your phone to complete the procedure. If not, continue with step 5. NM 5. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. After you have added the headset to the phone, it will automatically connect to the phone as soon as it is turned on and within range. The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions from the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Turn on Bluetooth visibility in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 14. 4. If your phone supports auto pairing, press YES when Add device? appears in your phone to complete the procedure. If not, continue with step 5. NN 5. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. After you have added the headset to the phone, it will automatically connect to the phone as soon as it is turned on and within range. The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions from the phone user guide on how to turn on Bluetooth in your phone. 1. Turn on Bluetooth in your phone. 2. Turn on Bluetooth visibility in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 14. NO 4. If your phone supports auto pairing, press YES when Add device? appears in your phone to complete the procedure. If not, continue with step 5. 5. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. After you have added the headset to the phone, it will automatically connect to the phone as soon as it is turned on and within range. The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added Before you can use your Bluetooth headset with your phone it has to be added once to the phone. Follow the instructions from the phone user guide on how to turn on Bluetooth in your phone. NP 1. Turn on Bluetooth in your phone. 2. Turn on Bluetooth visibility in your phone. This makes your phone visible to other Bluetooth devices. 3. Prepare your headset according to page 14. 4. If your phone supports auto pairing, press YES when Add device? appears in your phone to complete the procedure. If not, continue with step 5. 5. Prepare your phone according to the phone user guide on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000. After you have added the headset to the phone, it will automatically connect to the phone as soon as it is turned on and within range. The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added The headset beeps and flashes green when successfully added Prepare the headset Prepare the headset Prepare the headset Prepare the headset Make sure the headset is turned off (see page 17). Make sure the headset is turned off (see page 17). Make sure the headset is turned off (see page 17). Make sure the headset is turned off (see page 17). Make sure the indicator light flashes red and green Make sure the indicator light flashes red and green Make sure the indicator light flashes red and green Make sure the indicator light flashes red and green NQ Optimal range and wearing Optimal range and wearing Optimal range and wearing Optimal range and wearing NR Objects, walls and a greater distance than 5 m can effect the sound. Wear your headset on the same side of your body as your phone for best performance. Objects, walls and a greater distance than 5 m can effect the sound. Wear your headset on the same side of your body as your phone for best performance. Objects, walls and a greater distance than 5 m can effect the sound. Wear your headset on the same side of your body as your phone for best performance. Objects, walls and a greater distance than 5 m can effect the sound. Wear your headset on the same side of your body as your phone for best performance. NS Putting the headset on Putting the headset on Putting the headset on Putting the headset on Left and right ear use Left and right ear use Left and right ear use Left and right ear use Make sure you twist the speaker round into your ear. Make sure you twist the speaker round into your ear. Make sure you twist the speaker round into your ear. Make sure you twist the speaker round into your ear. NT Calling Calling Calling Calling Turning the headset on Turning the headset on Turning the headset on Turning the headset on (5(2 s) S) Turning the headset off Turning the headset off Turning the headset off Turning the headset off (5(2 s) S) e_eJdsQPR~ e_eJdsQPR~ ïïïKëçåóÉêáÅëëçåKÅçã pçåó=bêáÅëëçå=jçÄáäÉ=`çããìåáÅ~íáçåë=^_ pbJOON=UU=iìåÇI=pïÉÇÉå NOMOJQPQO=mN` mêáåíÉÇ=áå=uuuu Answering a call Answering a call Answering a call Answering a call NV Making a call Making a call Making a call Making a call OM ON Using voice commands Using voice commands Using voice commands Using voice commands Voice commands, such as dial, redial, answer and reject, can be very useful when you are using the headset. For more information on voice commands, and if your phone supports it, refer to the phone user guide. Voice commands, such as dial, redial, answer and reject, can be very useful when you are using the headset. For more information on voice commands, and if your phone supports it, refer to the phone user guide. Voice commands, such as dial, redial, answer and reject, can be very useful when you are using the headset. For more information on voice commands, and if your phone supports it, refer to the phone user guide. Voice commands, such as dial, redial, answer and reject, can be very useful when you are using the headset. For more information on voice commands, and if your phone supports it, refer to the phone user guide. Making a call using voice commands Making a call using voice commands Making a call using voice commands Making a call using voice commands OO Redialling Redialling Redialling Redialling OP OQ Transferring sound Transferring sound Transferring sound Transferring sound To transfer from headset to phone, refer to the phone user guide. To transfer from headset to phone, refer to the phone user guide. To transfer from headset to phone, refer to the phone user guide. To transfer from headset to phone, refer to the phone user guide. Ending a call Ending a call Ending a call Ending a call OR OS Rejecting a call Rejecting a call Rejecting a call Rejecting a call (5 S) Battery status Battery status Battery status Battery status OT Turning the microphone off (and on) Turning the microphone off (and on) Turning the microphone off (and on) Turning the microphone off (and on) Muting the microphone Muting the microphone Muting the microphone Muting the microphone OU Settings Settings Settings Settings Adjusting the speaker volume Adjusting the speaker volume Adjusting the speaker volume Adjusting the speaker volume OV Master reset Master reset Master reset Master reset Prepare your headset according to page 14. Prepare your headset according to page 14. Prepare your headset according to page 14. Prepare your headset according to page 14. (8 s) PM Attaching the strap Attaching the strap Attaching the strap Attaching the strap PN Troubleshooting Troubleshooting Troubleshooting Troubleshooting PO No connection between headset and phone Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone. Try to pair the headset again (see page 9). For more information on Bluetooth and pairing, go to ïïïKëçåóÉêáÅëëçåKÅçãLäÉ~êå~Äçìí The headset is automatically switched off • The battery is too low. The indicator light on the headset flashes red and you hear a low beep. • The headset switches off if you do not add it to the phone within 10 minutes. Unexpected behaviour Reset the headset (see page 30). Battery capacity A battery that has been infrequently used, or a new one, could have reduced capacity. It may need to be recharged a number of times. Redial does not work If the call list in the phone is empty you cannot use the redial function. Voice commands PP Make sure that voice commands are enabled and recorded in your phone before you start using them. No connection between headset and phone Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone.Try to pair the headset again (see page 9). For more information on Bluetooth and pairing, go to ïïïKëçåóÉêáÅëëçåKÅçãLäÉ~êå~Äçìí The headset is automatically switched off • The battery is too low. The indicator light on the headset flashes red and you hear a low beep. • The headset switches off if you do not add it to the phone within 10 minutes. Unexpected behaviour Reset the headset (see page 30). Battery capacity A battery that has been infrequently used, or a new one, could have reduced capacity. It may need to be recharged a number of times. Redial does not work If the call list in the phone is empty you cannot use the redial function. Voice commands Make sure that voice commands are enabled and recorded in your phone before you start using them. No connection between headset and phone PQ Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone. Try to pair the headset again (see page 9). For more information on Bluetooth and pairing, go to ïïïKëçåóÉêáÅëëçåKÅçãLäÉ~êå~Äçìí The headset is automatically switched off • The battery is too low. The indicator light on the headset flashes red and you hear a low beep. • The headset switches off if you do not add it to the phone within 10 minutes. Unexpected behaviour Reset the headset (see page 30). Battery capacity A battery that has been infrequently used, or a new one, could have reduced capacity. It may need to be recharged a number of times. Redial does not work If the call list in the phone is empty you cannot use the redial function. Voice commands Make sure that voice commands are enabled and recorded in your phone before you start using them. No connection between headset and phone PR Make sure the headset is charged and within range of the phone. Check or redo the Bluetooth settings in the phone. Try to pair the headset again (see page 9). For more information on Bluetooth and pairing, go to ïïïKëçåóÉêáÅëëçåKÅçãLäÉ~êå~Äçìí The headset is automatically switched off • The battery is too low. The indicator light on the headset flashes red and you hear a low beep. • The headset switches off if you do not add it to the phone within 10 minutes. Unexpected behaviour Reset the headset (see page 30). Battery capacity A battery that has been infrequently used, or a new one, could have reduced capacity. It may need to be recharged a number of times. Redial does not work If the call list in the phone is empty you cannot use the redial function. Voice commands Make sure that voice commands are enabled and recorded in your phone before you start using them. =ïïïKëçåóÉêáÅëëçåKÅçãLëìééçêíL Declaration of conformity for HBH-GV435a PS We, Sony Ericsson Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony Ericsson type DDA-0002013 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328, EN 301 489-17, EN 301 489-7 and EN 60950 following the provisions of Radio Equipment and Telecommunication Terminal Equipment directive 99/5/EC with requirements covering EMC directive 89/336/EEC and Low Voltage directive 73/23/EEC. Lund, July 2007 Jacob Sten, Head of Product Business Unit Accessories We fulfill the R&TTE Directive (99/5/EC). We fulfill the R&TTE Directive (99/5/EC). We fulfill the R&TTE Directive (99/5/EC). We fulfill the R&TTE Directive (99/5/EC). FCC statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 36 XMP Toolkit : XMP toolkit 2.9-9, framework 1.6 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : FrameMaker 7.1 Modify Date : 2007:08:22 12:30:11Z Create Date : 2000:09:20 09:32:31Z Title : Grover_HBH-GV435a_HBH_products_folded.fm Creator : Sony Ericsson Mobile Communications AB Page Mode : UseOutlines Author : Sony Ericsson Mobile Communications ABEXIF Metadata provided by EXIF.tools