Sony DDA-2019 Bluetooth Headset User Manual 08 user guide

Sony Mobile Communications Inc Bluetooth Headset 08 user guide

08 user guide

Sony Ericsson Mobile Communications ABSE-221 88 Lund, Sweden1212-5714.1Printed in XXXXXStereo Streaming Bluetooth™ Headset HBH-IS80012Red/green indicator lightRed/green indicator lightCharger connectorCharger connectorAction keyAction keyWhite indicator lightWhite indicator lightEar plugsEar plugsMicrophoneMicrophoneSMLNote: Due to electronic components one of the earplugs can feel a bit warmer than the other.Note: Due to electronic components one of the earplugs can feel a bit warmer than the other.2.5 hours2.5 hoursFirst time use: Charge approximately 8 hours.First time use: Charge approximately 8 hours.34CLA-60CST-60/CST-70CST-61CLA-61CDS-60Microphone close to the left earMicrophone close to the left earRed/green indicator lightTurning on and offGreen - Good battery level.Red - Low battery level.Normal useFlashing green - The headset is on.Flashing red - Low battery.PairingFlashing red/green - Pairing is ongoing.ChargingSteady red - Charging is ongoing.Steady green - Charging is ready.White indicator lightSteady light - A call is ongoing.Flashing - Pairing is ongoing.Red/green indicator lightTurning on and offGreen - Good battery level.Red - Low battery level.Normal useFlashing green - The headset is on.Flashing red - Low battery.PairingFlashing red/green - Pairing is ongoing.ChargingSteady red - Charging is ongoing.Steady green - Charging is ready.White indicator lightSteady light - A call is ongoing.Flashing - Pairing is ongoing.EnglishThe Stereo Streaming Bluetooth™ Headset HBH-IS800 lets you stay in control of your incoming and outgoing phone calls. You can enjoy stereo audio from a phone or other Bluetooth device, such as a computer or a portable music player. During calls, the music automatically pauses and starts playing again when the call ends.For full functionality, your phone or other device should support the following Bluetooth profiles:•Bluetooth Handsfree•Bluetooth Headset•Bluetooth Advanced Audio/Video Distribution•Bluetooth Audio/Video Remote ControlChargingBefore using the headset for the first time, charge it with the supplied charger for 8 hours, according to picture 2. The headset turns off during charging and switches on automatically when the charger is removed.For compatible chargers, see picture 3.Pairing the headsetBefore you can use the headset it has to be paired once with your phone. After a successful pairing, the headset will automatically connect to the phone as soon as it is turned on and within range.Note: The headset turns off if you do not pair it with the phone within 10 minutes.To pair the headset with the phone1. Make sure the headset is turned off.2. Turn on the Bluetooth function in the phone. For instructions, see the phone User guide.3. Turn on Bluetooth visibility in the phone. This makes the phone visible to other Bluetooth devices.4. Place the phone within 20 cm (8 inches) from the headset.5. Press and hold down the action key on the headset for about 5 seconds until the white indicator light starts flashing and the red/green indicator light flashes red and green.6. Press Yes when Add device? appears in the phone. If required, the passcode is 0000. The white indicator light stops flashing and the red/green indicator light slowly flashes green when successfully paired.Note: If auto pairing is not supported by your phone, or not successful, follow the first 5 steps above. Then pair the headset with your phone as described in the phone User guide. The passcode is 0000.Turning on and offTo turn on the headset•Press and hold down the action key for some seconds until the white indicator light turns on.To turn off the headset•Press and hold down the action key until for some seconds the white indicator light disappears.Adjusting volumeSee the phone User guide how to adjust ring volume, speaker volume and music volume.CallingTo make a call•Dial the number using the phone keys. The call is automatically activated in the headset.To end a call•Press the action key briefly.To answer a call / a second call•A beep indicates an incoming call. Briefly press the action key.To reject a call / a second call•Press and hold down the action key until you hear a beep.To redial the last dialled number•Double-click the action key.To switch between two calls•Press and hold down the action key until you hear a beep.Calling using voice commandsVoice commands can be useful when you are using the headset. For more information on voice commands, and if your phone supports it, see the phone User guide.To make a call using voice commands•Press and hold the action key until you hear a beep. Then say the command.Transferring soundTo transfer the sound from the phone to the headset•During a call on the phone, press the action key.To transfer the sound from the headset to the phoneSee the phone User guide.Listening to musicTo listen to music•Start the media player in your phone and select to use the headset.Briefly press the action key to pause and restart the music.To move between tracks•See the phone User guide.Resetting the headsetReset the headset if it behaves unexpectedly.To reset the handsfree1. Make sure the headset is turned off.2. Press and hold down the action key on the headset for about 5 seconds until the white indicator light starts flashing and the red/green indicator light flashes red and green.3. Press and hold the action key on the head set until the headset is completely switched offNote: After resetting the headset must be paired again before it can be used.BatteryA battery that has been infrequently used, or a new one, could have reduced capacity. It may need to be recharged a number of times.When the battery level is too low you hear a low beep. If you do not charge the headset, it automatically turns off within 10 minutes.TroubleshootingNo connection to the phoneMake sure the headset is charged and within 10 metres (33 feet) of the phone with no solid objects in between. Check or redo the Bluetooth settings in the phone. Try to pair the headset again.Go to www.sonyericsson.com/learnabout for more information on Bluetooth and pairing.Redial does not work•Make sure the call list in the phone is not empty.Voice commands do not work•Make sure your phone supports voice commands.•Make sure the voice commands are enabled and recorded in your phone before you start using them.The music is not played in the headset•Make sure your phone or other device is paired with the headset. You may have to restart the media player and select to use the headset.•Make sure your phone supports the Bluetooth Advanced Audio/Video Distribution profile.The music volume cannot be changed•Some mobiles do not support remote volume control. Please check the support website for downloading the additional software.The headset is automatically turned off•The battery level is too low. You hear a low beep approximately 10 minutes before the headset turns off. Charge the battery.•The headset turns off if you do not pair it with the phone within 10 minutes.Unexpected behaviour•Reset the headset.Note: Removing the label from the head set might void the warranty.User guideEnglishLanguageLanguageLanguageFCC StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.Any change or modification not expressly approved by Sony Ericsson may void the user's authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Industry Canada StatementThis device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Declaration of conformity for HBH-IS800We, Sony Ericsson Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Swedendeclare under our sole responsibility that our productSony Ericsson type DDA-0002019and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.7.1, EN 301 489-7:V1.3.1, EN 301 489-17:V1.2.1 and EN 60950-1:2006 following the provisions of Radio Equipment and Telecommunication Equipment directive 1999/5/EC.Lund, July 2008Jacob Sten, Head of Product Business Unit AccessoriesWe fulfil the R&TTE Directive.We fulfil the R&TTE Directive.Language 2

Navigation menu