Sony RD0050 Smart Watch User Manual Sony Ericsson Mobile Communications AB

Sony Mobile Communications Inc Smart Watch Sony Ericsson Mobile Communications AB

User manual

Startup guideSmartWatch 2SW2Sony Mobile Communications ABSE-221 88 Lund, Swedenwww.sonymobile.comXXXX-XXXX.1BasicsChargingBefore using your SmartWatch 2 for the first time, youneed to charge it for approximately 30 minutes. Sonychargers/USB cables are recommended.To charge your SmartWatch 21Plug one end of the USB cable into the charger or intothe USB port of a computer.2Plug the other end of the cable into the Micro USB portof your SmartWatch 2.A charger may not be included at purchase in allmarkets.Overview17823645 1. Light sensor2. Power key3. Actions key4. Home key5. Back key6. Touchscreen7. NFC detection area8. Port for charger/USB cableTurning on and offTo turn on your SmartWatch 2•Press and hold down the power key until thedisplay turns on.To turn off your SmartWatch 2•When the display is active, press and hold down thepower key until the display turns off.Setting up yourSmartWatch 2The quickest way to get started with your SmartWatch 2 isby connecting it to your device using NFC. If your devicedoes not support NFC, you can connect manually.Setting up using NFCTo save data costs, make sure that your device isconnected to a Wi-Fi® network.1Device: Make sure that the NFC function is turned onand that the screen is active and unlocked.2SmartWatch 2: Turn on your SmartWatch 2.3If the Smart Connect application is not pre-installed onyour device, place the device over the back of yourSmartWatch 2 so that the NFC detection area of eachdevice touches each other. Then follow the instructionsthat appear on the device's screen to install the SmartConnect application from Google Play™.4One-touch pair and connect by placing the device overthe back of your SmartWatch 2 so that the NFCdetection area of each device touches each other.5Device: Accept the pairing request from SmartWatch 2.6Device: Follow the instructions to install the SmartWatch2 application from Google Play™. Then SmartWatch 2restarts automatically to finish setting up.Setting up manuallyIf your device does not support NFC, you can connectmanually using Bluetooth® function.To set up using the Bluetooth® functionTo save data costs, make sure that your device isconnected to a Wi-Fi® network.1Device: Make sure that you have the Smart Connectapplication, which is available on Google Play™,installed on your device.2Device: Make sure that the Bluetooth® function isturned on.3SmartWatch 2: Turn on your SmartWatch 2.4Device: Scan for Bluetooth® devices, then selectSmartWatch 2 in the list of available devices.5Device: Accept the pairing request from SmartWatch2.6Device: Follow the instructions to install theSmartWatch 2 application from Google Play™.SmartWatch 2 restarts automatically when theapplication is installed.Getting to know yourSmartWatch 2You can use your SmartWatch 2 as a regular watch andaccess most applications when it is not connected to adevice. When it is connected, you get a richer set offunctions.Installing extra applicationsInstall extra applications via the Smart Connect applicationon the Android™ device to optimise the functionality ofyour SmartWatch 2.To install an extra application1SmartWatch 2: Find and tap the App recommender icon.2SmartWatch 2: Select an application in the list ofrecommended applications, then tap View & install.3Device: When Google Play™ opens, tap install.4Device: Follow the instructions that appear on thescreen to install the application that you selected. Anicon of the application shows on the screen ofSmartWatch 2 after the installation is completed.Support on the webVisit www.sonymobile.com/support to get the most fromyour accessory, including Troubleshooting and a Userguide for your SmartWatch 2.
Sony SW2Prior to use, please read the Important information leafletseparately provided.This User guide is published by Sony Mobile Communications AB or its localaffiliated company, without any warranty. Improvements and changes to this Userguide necessitated by typographical errors, inaccuracies of current information, orimprovements to programs and/or equipment, may be made by Sony MobileCommunications AB at any time and without notice. Such changes will, however,be incorporated into new editions of this User guide.All rights reserved.©Sony Mobile Communications AB, 2013Publication number: XXXX-XXXX.1Interoperability and compatibility among Bluetooth® devices varies. Devicegenerally supports products utilizing Bluetooth spec. 1.2 or higher, and Headset orHandsfree profile.Sony is the trademark or registered trademark of Sony Corporation. Bluetooth isthe trademark of the Bluetooth (SIG) Inc. and is used under license. All othermarks are the property of their respective owners. All rights reserved.All product and company names mentioned herein are the trademarks orregistered trademarks of their respective owners. Any rights not expressly grantedherein are reserved. All other trademarks are property of their respective owners.Visit www.sonymobile.com for more information.All illustrations are for illustration only and may not accurately depict the actualaccessory.Declaration of Conformity forSW2We, Sony Mobile Communications AB ofNya VattentornetSE-221 88 Lund, Swedendeclare under our sole responsibility that our productSony type RD-0050and in combination with our accessories, to which thisdeclaration relates is in conformity with the appropriatestandards EN 300 328:V1.7.1, EN 301 489-17:V2.1.1, EN301 489-3:V1.4.1 and EN 60 950-1:2006+A11:2009+A1:2010 following the provisions of, RadioEquipment and Telecommunication Terminal Equipmentdirective 1999/5/EC.Lund, July 2013Anders GryngeDirector, Head of Global Type ApprovalWe fulfil the requirements of the R&TTE Directive (1999/5/EC).FCC StatementThis device complies with Part 15 of the FCC rules. Operation is subjectto the following two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including interference that may cause undesired operation.Any change or modification not expressly approved by Sony may void the user'sauthority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Industry Canada StatementThis device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions: (1) this device may notcause interference, and (2) this device must accept any interference, includinginterference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 duCanada.Avis d’industrie CanadaLe présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil nedoit pas produire de brouillage, et, and (2) l'utilisateur de l'appareil doitaccepter tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en compromettre le fonctionnement.www.sonymobile.com

Navigation menu