Sony RDR VX530 User Manual Quick Start Guide RDRVX530 Qsg
User Manual: Sony RDR-VX530 Quick Start Guide
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Connecting the Set Top Box controller You have a: You will need: Cable Box With Video / Audio Output –or– Satellite Receiver RDR-VX530 Place it so that the tip of the controller is near the remote control reception window on your set top box. X2 X2 (one antenna cable is supplied) (one audio/video cord is supplied) COMPONENT VIDEO OUT CAVLE IN OUT TO TV Cable Box/ Satellite Receiver OUT DIGITAL AUDIO OUT ANT IN OPTICAL Cable Box / Satellite Receiver COMPONENT OUT AUDIO OUT VIDEO Television CAVLE IN OUT TO TV OPTICAL LINE OUT VCR-DVD Recorder VHF/UHF VIDEO IN L PB R PR AUDIO OUT AUDIO COAXIAL OPTICALAUDIO OUT DIGITAL OUT COMPONENT 4 You can have the recorder control channels on the cable box or satellite receiver for timer recording. Connect the Set Top Box controller (supplied), and select “Yes” in step 7 of Setup on the next page. S VIDEO 2 to your antenna wall jack VIDEO to SET TOP BOX CONTROL DIGITAL AUDIO OUT ANT IN 1 IN OUT LINE R BOX SET TOP OL CONTR to VIDEO OUT/ AUDIO OUT VIDEO OUT S VIDEO Y L to an AC outlet to CABLE IN Follow the three steps below to connect, setup and make recordings on your VCR-DVD recorder. S VIDEO Connecting an S video cord or a component video cord to LINE IN to VHF/UHF IN LINE IN VHF/UHF to OUT TO TV IN to LINE OUT LINE 1 IN ENT S VIDEO OUT COMPONOUT O VIDEO AUDIO OUT VIDE to LINE 1 IN LINE OUT VHF/UHF VIDEO IN Television Y L L PB R R PR SET TOP BOX CONTROL to an AC outlet AUDIO COAXIAL OPTICALAUDIO OUT 3 DIGITAL 1 VCR-DVD Recorder ©2006 Sony Corporation AUDIO OUT 4 2-672-435-11(1) to COMPONENT VIDEO IN Connect all power cords last! INPUT VIDEO IN COMPONENT S VIDEO Y PR PB IN VHF/UHF to COMPONENT VIDEO OUT AK68-00990A Printed in China to S VIDEO IN a S VIDEO COMPONENT OUT AUDIO OUT VIDEO 1 IN OUT LINE VIDEO LINE OUT VHF/UHF VIDEO IN b Y L L PB R R PR BOX SET TOP OL CONTR OUT AUDIO COAXIAL OPTICALAUDIO OUT DIGITAL to S VIDEO OUT VCR-DVD Recorder Before hookup 1 AUDIO Connect one of the following cords (not supplied) instead of the video cord. (One audio/video cord supplied.)You will enjoy high quality images. Disconnect your VCR If you have been using a VCR, you do not need to disconnect all of your equipment. Just disconnect your VCR from the other equipment and connect this VCR-DVD recorder in its place. Television Cable Box/ Satellite Receiver You will need: You have a: Cable Box Without Video / Audio Output (or cable with no cable box) –or– Antenna (no cable TV) X1 X3 (one audio/video cord is supplied) (one antenna cable is supplied) Connecting an AV amplifier (receiver) Television Cable Box AUDIO OUT L/R If you don’t have a cable box, connect this antenna cable directly to VHF/UHF IN on the VCR-DVD recorder. VCR a S video cord -orb Component video cords If your TV accepts progressive 480p format signals, you must use this connection. For further explanations, see “Video Settings (Video)” in the Operating Instructions. to DIGITAL AUDIO OUT (COAXIAL or OPTICAL) to an AC outlet S VIDEO COMPONENT OUT AUDIO OUT VIDEO 1 IN OUT LINE VIDEO LINE OUT VHF/UHF VCR-DVD Recorder VIDEO IN Y L L PB R VCR-DVD Recorder R to RF IN RF IN PR BOX SET TOP OL CONTR OUT to DIGITAL IN (OPTICAL) 4 to RF OUT 1 2 Select a connection to VHF/UHF IN ENT S VIDEO COMPONOUT O AUDIO OUT VIDE to LINE OUT 1 IN OUT LINE VIDEO LINE OUT VHF/UHF 2 L R Proceed to step 1 and begin! SET TOP BOX CONTROL AUDIO a LINE IN Y OUT AUDIO to an AC outlet COAXIAL OPTICALAUDIO OUT DIGITAL 3 VCR-DVD Recorder b IN IN PB Cable Box Without Video/Audio Output (or cable with no cable box) – or – Antenna (no cable TV) IN DIGITAL VHF/UHF R PR AV Amplifier c VIDEO L Cable Box With Video/Audio Output – or – Satellite Receiver OUT AUDIO DIGITAL AUDIO LINE IN to your antenna wall jack Select one of the following two types of basic connections according to the type of equipment you have. to LINE IN to VHF/UHF IN AUDIO COAXIAL OPTICAL OUT to VHF/UHF OUT to DIGITAL IN (COAXIAL) to LINE IN (AUDIO) Connect one of the following cords (not supplied). 4 Connect all power cords last! a audio cords -orb coaxial digital cord -orc optical digital cord Connecting to an AV amplifier (receiver) with digital cords will enable you to listen to Dolby Digital or DTS surround effects. For further explanations, see “Connecting to Your AV Amplifier (Receiver)” in the Operating Instructions. The Easy Setup display automatically appears on your TV screen when you turn on your recorder for the first time. Follow the steps below to make the minimum number of basic adjustments to use the recorder. If you make a mistake, press RETURN. Turn on your TV and any other 1 connected equipment such as your cable box or satellite receiver. 2 Press I/1 on the VCR-DVD recorder. 3 Switch the input selector on your TV so that the signal from the recorder appears on your TV screen. Easy Setup Press M/m to select “Manual” and 6 press ENTER. Easy Setup Press M/m to set the month and press ,. Set the day, year, hour, minutes, and AM/PM in the same way. Then press ENTER. Auto Manual Move ENTER Enter SYSTEM MENU Return Exit OPEN/ CLOSE Press M/m to select whether or 7 not you want to use the Set Top Easy Setup Box control function, then press ENTER. Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup. Label side facing up Select a method for setting the clock. If you select "Auto", this recorder will look for a time signal when you turn it off. 10:10 AM DVD Do you want to control your set top box with this recorder? (Changes to the current setting will erase all timer settings.) Yes Start No Move ENTER Enter SYSTEM MENU Return If “Initial setting necessary to operate the DVD recorder will be made. You can change them later using setup.” does not appear on your TV screen, select “Easy Setup” from “Setup” in the System Menu. 4 Press M/m to select a language for 5 the on-screen display, then press Press ENTER. ENTER. 8a Select the screen language. English Français Español ENTER Enter Return SYSTEM MENU Return SYSTEM MENU Exit Exit YES Press the number buttons to enter the brand code of your cable box or satellite receiver. Then select “OK” and press ENTER. NO Easy Setup Easy Setup Move ENTER Enter Return Press M/m to select the cable box/satellite receiver output channel, then press ENTER. Easy Setup Cable SYSTEM MENU Exit ENTER Enter Return / (on/standby) Number buttons 11 Exit Easy Setup 10:10 AM Searching for receivable Channels. 25 Please wait. ENTER Enter Return Easy Setup SYSTEM MENU Exit SYSTEM MENU Exit 9b The Tuner Preset function starts searching for all receivable channels. This may take a couple of minutes. 4 : 3 Pan Scan ENTER Enter Return Easy Setup SYSTEM MENU Exit 10:10 AM Test your Set Top Box controller Dolby Digital D-PCM Dolby Digital ENTER Enter Return SYSTEM MENU Exit If you connected a Set Top Box controller, do the following: ENTE R ENTE R Easy Setup 13 10:10 AM Press DVD to operate the DVD 1 recorder. 0 2 Press TITLE LIST. INPUT SELECT The Title List menu appears. DISPLAY Title List(Original) box/satellite receiver). ENTER Enter Return Easy Setup SYSTEM MENU Exit 10:10 AM Finish Return Press CH+/- and confirm 3 that the channel changes on the cable box/satellite receiver window. If the recorder does not control your cable box or satellite receiver, see “If you cannot get the recorder to control your cable box/satellite receiver” at the end of “Step 7: Easy Setup” in the Operating Instructions. Easy Setup is finished. ENTER Enter 10:10 AM No. Title 1/4 TITLE LIST Length Edit 01 Ch 23 01:29:03 > 02 Ch 66 00:31:23 > 03 Ch 95 01:59:00 > 04 Ch 97 00:58:56 > Ch 23 May/02/2006 08:00 PM ENTER Enter Return SYSTEM MENU Exit SYSTEM MENU Exit The sub-menu appears. The following explains how to record a current TV program. For instructions on how to set the timer, see the timer recording sections in the Operating Instructions. 1 Press DVD to record to a DVD disc. Or, press VIDEO to record to a VHS tape. Press CH+/– to select a channel. If you are not using the Set Top Box controller: • If you connected your cable box or satellite receiver to the Line 1 input of the VCR-DVD recorder, press INPUT SELECT until “LINE1” appears in the front panel display. Then select a channel on your cable box or satellite receiver. • If you connected your cable box to the VCR-DVD recorder’s antenna input jack, select channel 3 or 4, whichever channel is used to receive the signal from the cable box. Then select a channel on your cable box. 3 Press REC MODE repeatedly to select the recording mode. When recording to a DVD disc: HQ, HSP, SP, LSP, ESP, LP, EP, or SLP HQ offers the best quality picture, but with the shortest recording time. Recording time increases with each successive mode, but the picture quality gradually deteriorates. 10:10 AM No. Title 1/4 Length Edit 01 Ch 23 REC 02 Ch 66 01:29:03 > Play 00:31:23 Title Erase> 03 Ch 95 01:59:00 > Chapter Erase 04 Ch 97 00:58:56 > Protect Title Name Ch 23 A-B Erase May/02/2006 08:00 PM REC MODE Move Divide Title ENTER Enter Return SYSTEM MENU Exit Press / to select “Play” and 4 press ENTER. When recording to a VHS tape: SP or EP EP (Extended Play) provides recording time three times as long as SP (Standard Play). However, SP produces better picture and audio quality. Playback starts from the beginning of the title. Playback the Recorded VHS Tape 4 Press REC. The recorder starts recording. To stop recording, press STOP. 1 Press VIDEO to operate the VCR. Press / to find the point 2 you want to start playback. For further explanations, see “VCR Playback” in the Operating Instructions. 3 Press PLAY. Playback starts. Turn on the recorder and 1 the cable box/satellite Point the remote at the 2 recorder (not at the cable Off Move 9 DVD On When “Finish” appears, press ENTER to complete Easy Setup. 8 receiver. DTS Move 7 Move The channel number appears in the front panel display. RETURN ///ENTER Press ENTER to make a selection 6 ENTER 2 4 : 3 Letter Box If your AV amplifier has a DTS decoder, select “On.” If not, select “Off.” 5 Wait until “LOAD” disappears from the front panel display. See “Quick Guide to Disc Types” in the Operating Instructions for more details about the differences between disc types. 10:10 AM 16 : 9 Press / to select the type of DTS signal you want to send to your AV amplifier (receiver), then press ENTER. 4 If you have cable, select “Cable.” If not, select “Antenna.” Select your TV screen type. Press / to select the type of Dolby Digital signal you want to send to your AV amplifier (receiver), then press ENTER. 3 Title List (Original) Ch4 Move 2 Record a TV Program Ch3 Move Press VIDEO to operate the VCR. Insert a tape with its safety tab in place. 1 Press / to select the title you 3 want to play and press ENTER. Line2 Move 12 1 2 Line1 If your AV amplifier (receiver) has a Dolby Digital decoder, select “Dolby Digital.” If not, select “D-PCM.” SYSTEM MENU SYSTEM MENU Press M/m to select whether or not you have a cable connection, and press ENTER. Select input line or Set Top Box's output channel. Press M/m to select the type of TV you have, then press ENTER. If you have a wide-screen TV, select “16:9.” If you have a standard TV, select either “4:3 Letter Box”(shrink to fit) or “4:3 Pan Scan” (stretch to fit). This will determine how "widescreen" images are displayed on your TV. 1 2 Press DVD to operate the DVD recorder. Press OPEN/CLOSE and place a recordable DVD on the disc tray. Press OPEN/CLOSE again to close the disc tray. Playback the Recorded DVD Disc CH/ TRACKING 10:10 AM Return 10 8b Antenna Cancel Move If you connected your cable box or satellite receiver to the VCR-DVD recorder’s audio/ video input, select the “Line” number you connected to. If you connected to the VCR-DVD recorder’s antenna input, select the “Ch (channel)” used to receive the signal from the cable box. 10:10 AM Select the way in which you will receive channels. OK Insert a VHS Tape 3 10:10 AM Enter the brand code of your set top box. Find the brand code of your cable box or satellite receiver in the “Cable Box/Satellite Receiver Brand Code” list of the Operating Instructions. 9a Easy Setup Move ENTER Enter Exit Insert a DVD Disc VIDEO Dub From VHS Tape to DVD From DVD to VHS Tape 1 Insert a recordable disc. 2 Insert a source tape. Cue the tape at the start 3 point, and press < VIDEO. 1 Insert a recordable tape. 2 Insert a source disc. Select a title on the disc, 3 and press DVD ,. Before dubbing, select the recording mode and make the necessary audio settings. For details, see the dubbing section in the Operating Instructions. VIDEO
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:2cfd4c16-952c-4981-825a-e0313c1e7fb3 Create Date : 2005:04:27 17:19:13Z Modify Date : 2006:03:23 10:15:26+09:00 Metadata Date : 2006:03:23 10:15:26+09:00 Creator Tool : Adobe InDesign CS (3.0.1) Version ID : 1 Rendition Class : proof:pdf Derived From Instance ID : 7cc8b706-b6f0-11d9-b568-e285d0bc872f Derived From Document ID : adobe:docid:indd:5756d63b-b0ac-11d9-bba7-f6b92b4119e8 Derived From Version ID : 1 Document ID : adobe:docid:indd:7cc8b707-b6f0-11d9-b568-e285d0bc872f Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Reference Instance ID : uuid:e6d59318-e193-4037-bbb6-0c239bd4b15d, uuid:9331a8e2-6401-4c3e-b6f2-5d7ba5d11113, uuid:e454376e-5e07-46e2-a3d2-f36cb98c56fa, uuid:b0e25e82-ee4e-4d68-8f91-33fd45e261b4, uuid:1b5aea14-4579-4488-b011-43bc7eaf0c5b, uuid:16c862f6-c3f1-4a18-b032-9a7b25496eff, uuid:e21a66c2-616a-4d5e-bce7-7bf656c8a9f5, uuid:a2b2faf6-83c6-4ad4-b3b9-abcfbd3ad91e, uuid:a2b2faf6-83c6-4ad4-b3b9-abcfbd3ad91e, uuid:41ab1970-92bb-4663-a393-72f46f27410e, uuid:26a340ef-8507-4f71-919d-d70522f2b957, uuid:cd9b99e3-bfaf-432c-9269-57ba7be5e665, uuid:b35f2464-a6ff-434a-8722-541e1cbdfb28, uuid:74f9f00e-dd14-4d22-920d-88eb627107dd, uuid:38d6a1dc-3f79-4d8a-a321-839a18ac5b86, uuid:290fc696-7424-11d8-8644-eb74ecbe5c82, uuid:458227a9-c756-4750-97a5-b6528c23b34d, uuid:c42ab9de-fae2-4984-8aed-1da35f463470, uuid:ffbcf479-8001-4294-94cd-78c668e9527e, uuid:12efce74-4c32-48d0-a7a0-c1d30d314130, uuid:a0e71258-1892-4a9c-9c26-cc5723cca175, uuid:cea36b9d-1c10-413e-bf65-92d9b2a52738, uuid:82c8cab0-feee-474e-a128-a5fa48330a65, uuid:7d5d93c0-e0f1-47c2-863f-def27d05362f, uuid:703564c5-27ad-4cc9-9f95-0cb0d9ca2ceb, uuid:6789f7c2-1e3d-4b7e-87ae-cd83e72c05dc, uuid:a2d26454-cec2-447d-9c3c-33e7f3595bef, uuid:189c484a-e73f-4e83-9021-37c8bb8057c7, uuid:793a0cfe-112b-4d41-a5d0-8155589163c9 Manifest Reference Document ID : uuid:3ded1b07-1531-4187-a922-706192fa4786, uuid:d15cf39f-ee91-417a-ac08-3c1e8583107d, uuid:52c0b4fe-bdc0-4544-9956-fb0d89f5bbf4, uuid:63d36e7c-640e-4195-b732-66788e547de1, uuid:28a1b513-ae12-40d2-bc50-8b50f5ce37b4, uuid:0c3f63c0-ac2c-44e6-b433-fd4441b83c0e, uuid:3a07c85c-359d-411b-b2a4-8fec82ebc33b, uuid:97f276f7-0393-41e1-af75-173ddca29dda, uuid:97f276f7-0393-41e1-af75-173ddca29dda, uuid:d43e8851-0f02-49eb-b1ef-45bce8c12f66, uuid:aa87e2ea-f9f1-43ef-863d-0e8590a69637, uuid:2057bc47-c497-408d-be9a-246debe40c75, uuid:9b8440cc-5591-4e02-aa7a-d1a88d17ccfa, uuid:076bdde4-27b2-4f81-94d1-ee8384b802df, uuid:5d87fb13-73d6-4891-b4a1-5756f5f51ca0, adobe:docid:photoshop:2b2bd2d7-b212-11d7-9091-b24c769390c4, uuid:8c7447cd-20c7-40a4-8951-aa9c37fa3ceb, uuid:bda9062c-6478-4d97-a793-cecfe308c2c9, uuid:5b6e53b1-a846-43be-a0e7-630e80c6b42b, uuid:b69ae561-6ae4-491e-986d-5bce551634f2, uuid:a39a41af-fbb8-41af-b94d-222a9db37178, uuid:96a864b2-bd52-4d8c-9e74-e53c70af39d5, uuid:9c78a668-6ef8-481b-9854-c47442838aee, uuid:82a3e5ae-7d9f-42ef-8ee2-8e9ffd8bf181, uuid:78d15be8-0e5f-4b14-8719-61d7c5ba7926, uuid:68c9a1e6-9cf0-4f63-8c8a-e9afc6249aba, uuid:84e10b25-0c2f-4804-a83b-4d9e44cc6b2f, uuid:4a52a017-70e0-4a7c-bdea-80fa83abebea, uuid:e4d5f570-7afc-4240-9731-3db3894db591 Format : application/pdf Title : RDR-VX530 Creator : Sony Corporation Tagged PDF : Yes Trapped : False Author : Sony Corporation Producer : Adobe PDF Library 6.0EXIF Metadata provided by EXIF.tools