Sony RW0100 WLan Dongle RW-0100 User Manual 74x105 6 Pages indd

Sony Mobile Communications Inc WLan Dongle RW-0100 74x105 6 Pages indd

Contents

User Manual _1

www.sonymobile.comSony Mobile Communications ABSE-221 88 Lund, SwedenJuly 9, 2013 16:21:23We, Sony Mobile Communications AB ofNya VattentornetSE-221 88 Lund, Swedendeclare under our sole responsibility that our productSony type RW-0100and in combination with our accessories, to which thisdeclaration relates is inconformity with the appropriatestandards EN 300 328:V1.7.1,EN 301 489-3:V1.4.1,EN 301 489-7:V1.3.1, EN301 489-17:V2.1.1, EN 301893:V1.7.1, EN302 502 and EN60 950-1:2006+A11:2009+A1:2010 following the provisions of, RadioEquipment andTelecommunication Terminal Equipment directive 1999/5/EC.Lund, July 2013Pär Thuresson,Quality Officer, SVP, Quality & Customer ServicesWe fulfil the requirements of the R&TTE Directive (1999/5/EC).Declaration of Conformity for IM101276-1179.1
FCC StatementThis device complies with Part 15 of the FCC rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference,and (2) This device must accept any interference received,including interference that may cause undesired operation.Any change or modification not expressly approved by Sonymay void the user's authority to operate the equipment.This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment andreceiver.•Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician forhelp.Industry Canada StatementThis device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions: (1) thisdevice may not cause interference, and (2) this device mustaccept any interference, including interference that may causeundesired operation of the device.This Class B digital apparatus complies with CanadianICES-003.Cet appareil numérique de la classe B est conforme à lanorme NMB-003 du Canada.Avis d’industrie CanadaLe présent appareil est conforme aux CNR d'Industrie Canadaapplicables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et, and (2)l'utilisateur de l'appareil doit accepter tout brouillageradioélectrique subi, même si le brouillage est susceptibled'en compromettre le fonctionnement.July 9, 2013 16:21:24May 21, 2010 17:08:55April 1, 2010 16:06:29ᆶ۾ᆶ࡞࿿ዊຫ௽೼ℷᐌՓ⫼ᴵӊϟˈ៥Ӏⱘ⦃ֱՓ⫼ᳳ䰤ᰃ20 ᑈDŽᆶ۾ᆶ࡞࿿ዊईᇮ໎䚼ӊৡ⿄䪙(Pb)∲(Hg)䬝(Cd)݁Ӌ䫀(Cr6+)໮⒈㘨㣃 (PBB)໮⒈Ѡ㣃䝮(PBDE)䜡ӊ XOO O O Oܙ⬉఼˄བ䳔㽕˅ XOOO O OO: 㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼SJ/T 11363-2006 㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽX: 㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ SJ/T 11363-2006 㾘ᅮⱘ䰤䞣㽕∖DŽ˄ᠧĀXāⱘᡔᴃॳ಴ᰃ಴ЎⳂࠡЎℶ≵᳝ৃ᳓ᤶᡔᴃDŽ˅

Navigation menu