Sony RW0100 WLan Dongle RW-0100 User Manual 74x105 6 Pages indd

Sony Mobile Communications Inc WLan Dongle RW-0100 74x105 6 Pages indd

Contents

User Manual _1

www.sonymobile.com
Sony Mobile Communications AB
SE-221 88 Lund, Sweden
July 9, 2013 16:21:23
We, Sony Mobile Communications AB of
Nya Vattentornet
SE-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony type RW-0100
and in combination with our accessories, to which this
declaration relates is inconformity with the appropriate
standards EN 300 328:V1.7.1,EN 301 489-3:V1.4.1,
EN 301 489-7:V1.3.1, EN301 489-17:V2.1.1, EN 301
893:V1.7.1, EN302 502 and EN60 950-1:2006+A11:
2009+A1:2010 following the provisions of, Radio
Equipment andTelecommunication Terminal
Equipment directive 1999/5/EC.
Lund, July 2013
Pär Thuresson,
Quality Officer, SVP, Quality & Customer Services
We fulfil the requirements of the R&TTE Directive
(1999/5/EC).
Declaration of Conformity for IM10
1276-1179.1
FCC Statement
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Any change or modification not expressly approved by Sony
may void the user's authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and
receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
help.
Industry Canada Statement
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Avis d’industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et, and (2)
l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
July 9, 2013 16:21:24
May 21, 2010 17:08:55
April 1, 2010 16:06:29
ᆶ۾ᆶ࡞࿿ዊຫ௽
೼ℷᐌՓ⫼ᴵӊϟˈ៥Ӏⱘ⦃ֱՓ⫼ᳳ䰤ᰃ
20 ᑈDŽ
ᆶ۾ᆶ࡞࿿ዊईᇮ໎
䚼ӊ
ৡ⿄
䪙
(Pb)
∲
(Hg)
䬝
(Cd)
݁Ӌ䫀
(Cr6+)
໮⒈
㘨㣃
(PBB)
໮⒈
Ѡ㣃䝮
(PBDE)
䜡ӊ XOO O O O
ܙ⬉఼
˄བ䳔㽕˅ XOOO O O
O: 㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼
SJ/T 11363-2006 㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
X: 㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ё
ⱘ৿䞣䍙ߎ SJ/T 11363-2006 㾘ᅮⱘ䰤䞣㽕∖DŽ˄ᠧ
ĀXāⱘᡔᴃॳ಴ᰃ಴ЎⳂࠡЎℶ≵᳝ৃ᳓ᤶᡔᴃDŽ˅

Navigation menu