Sony Portable Minidisc Player Mz E10 Users Manual
sony_MZ-E10_service_manual sony_MZ-E10_service_manual
MZ-E10 to the manual 0b69e6cf-43b9-486b-bff0-49f398392255
2015-01-23
: Sony Sony-Portable-Minidisc-Player-Mz-E10-Users-Manual-294760 sony-portable-minidisc-player-mz-e10-users-manual-294760 sony pdf
Open the PDF directly: View PDF 
.
Page Count: 40
| Download | |
| Open PDF In Browser | View PDF |
MZ-E10 SERVICE MANUAL US Model Canadian Model AEP Model UK Model E Model Tourist Model Ver 1.0 2002.11 US and foreign patents licensed from Dolby Laboratories Licensing Corporation Model Name Using Similar Mechanism NEW MD Mechanism Type MT-MZE10-184 Optical Pick-up Mechanism Type ABX-1ES SPECIFICATIONS Audio playing system MiniDisc digital audio system Laser diode properties Material: GaAlAs Wavelength: λ = 790 nm Emission duration: continuous Laser output: less than 44.6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. Revolutions Approx. 300 rpm to 2,700 rpm Error correction ACIRC (Advanced Cross Interleave Reed Solomon Code) Sampling frequency 44.1 kHz Coding ATRAC (Adaptive TRansform Acoustic Coding) ATRAC3: LP2/LP4 Modulation system EFM (Eight to Fourteen Modulation) Number of channels 2 stereo channels 1 monaural channel Frequency response 20 to 20,000 Hz ± 3 dB Outputs Headphones/earphones: dedicated headphone/ remote control jack, output level 5 mW + 5 mW(US model) load impedance 16 ohms, 5 mW + 5 mW (Other models) load impedance 16 ohms Power requirements Lithium-ion rechargeable battery (Built-in: LIP- 3WMB, 3.7 V, 340 mAh, Li-ion) External power jack (for the battery charging stand): Power rating 6 V DC Battery life1) (Unit: Approx. hours) (JEITA2)) Batteries Lithium-ion built-in rechargeable battery3) SP Stereo (normal) 23 LP2 Stereo 33 LP4 Stereo 40 1) Measured with the power save function on (see “ Preserving battery power” ). 2) Measured in accordance with the JEITA (Japan Electronics and Information Technology Industries Association) standard (using a Sony MDW-series Mini-disc). 3) With a fully charged battery. Note The battery life may be shorter than that specified, depending on the operating conditions,the temperature of the location. Dimensions Approx. 81.9 x 72.2 x 9.9 mm (w/h/d) ( 3 1/4 x 2 7/8 x 13/32 in.) (not including projecting parts and controls) Mass Approx. 55 g (1.6 oz) (including the built-in rechargeable battery) Supplied accessories Headphones/earphones with a remote control (1) Battery charging stand (1) AC power adaptor (for the supplied battery charging stand) (1) Headphone adaptor (1) Carrying pouch (1) Design and specifications are subject to change without notice. PORTABLE MINIDISC PLAYER 9-874-219-01 Sony Corporation 2002K0200-1 © 2002.11 Personal Audio Company Published by Sony Engineering Corporation MZ-E10 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. ADVARSEL! Lithiumbatteri-Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. ADVARSEL Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. VARNING Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en likvärdig typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt gällande föreskrifter. VAROITUS Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Flexible Circuit Board Repairing • Keep the temperature of the soldering iron around 270°C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. TABLE OF CONTENTS Specifications ........................................................................... 1 1. SERVICING NOTE ...................................................... 3 2. GENERAL Playing an MD ................................................................... 4 3. DISASSEMBLY 3-1. Panel assy (S), Upper ................................................. 3-2. Mechanism Deck (MT-MZE10-184) .......................... 3-3. Bracket assy ............................................................... 3-4. Power Board, Main Board .......................................... 3-5. Control Board ............................................................. 3-6. Optical Pick-up assy(ABX-1ES) ................................ 5 5 6 6 7 7 4. TEST MODE .................................................................. 8 5. ELECTRICAL ADJUSTMENTS ............................ 11 6. DIAGRAMS 6-1. Block Diagram .......................................................... 6-2. Printed Wiring Boards – Main Section (1/2) – ......... 6-3. Printed Wiring Boards – Main Section (2/2) – ......... 6-4. Schematic Diagram – Main Section (1/3) – ............. 6-5. Schematic Diagram – Main Section (2/3) – ............. 6-6. Schematic Diagram – Main Section (3/3) – ............. 6-7. IC Pin Function Descrintion ..................................... 6-8. IC Block Diagrams ................................................... 19 20 21 22 23 24 26 30 7. EXPLODED VIEWS 7-1. Main Section ............................................................. 33 7-2. Mechanism Deck Section (MT-MZE10-184) ........... 34 8. ELECTRICAL PARTS LIST ................................... 35 r UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) : LEAD FREE MARK Notes on chip component replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat. SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK !ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY. 2 Unleaded solder has the following characteristics. • Unleaded solder melts at a temperature about 40°C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350°C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! • Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. * Replacement of SN761058ZQL (IC501) and LC896442-VH416-E (IC601) used in this set requires a special tool. MZ-E10 SECTION 1 SERVICING NOTE When repairing this device with the power on, if you remove the main board, this device stops working. In this case, you work without the device stopping by fastening the hook of the Open/Close detection switch (S803). Open/Close detection switch (S803) 3 MZ-E10 SECTION 2 GENERAL The Player 1 2 C D 9 This section is extracted from instruction manual. Playing an MD E 1 Insert an MD. 6 1 Slide OPEN to open the lid. 2 Insert an MD. 8 7 1 2 3 4 5 3 i (Headphones/earphones) jack GROUP button “3-color info-LED” HOLD (Locking the control) switch 5-way control key ( .• > N* • x•VOL +, –) OPEN switch BUILT-IN BATTERY switch (at the bottom) Terminals for charging stand (at the bottom) Hand strap hole Use the hole to attach your strap 6 7 8 9 3 Close the lid. 2 1 Insert an MD with the label side facing up, pushing the MD to the direction of the arrow in the illustration. 2 Play an MD. “3-color info-LED” Bottom side of the player VOL– * N has a tactile dot . VOL+ The display window of the remote control 1 2 3 4 5 x 6 VOL + Jog lever (.• u/ENT•>) 7 8 9 . x >N VOL – 5-way control key 1 2 3 4 5 6 Disc indication Track number display Character information display Group play indication Play mode indication Virtual Surround/6-band equalizer indications 7 Battery level indication 8 Bookmark indication 9 Alarm indication 1 Press the jog lever ( u) on the remote control. (Press towards > N on the player.) A short beep sounds in the headphones/earphones. The LED lights up. 2 Turn the control towards VOL + or – on the remote control to adjust the volume. (Press towards VOL + or – on the player. ) The volume indicator appears in the display, allowing you to check the volume level. To stop play, press x. A long beep sounds in the headphones/earphones. Playback starts from the point you last stopped playing. To start playback from the beginning of the disc, press and hold the jog lever (u) for 2 seconds or more on the remote control (Press and hold towards > N for 2 seconds or more on the player). The battery charging stand 1 2 1 DC IN (6V jack) (at the bottom) 2 Terminals for charging The headphones/earphones with a remote control A B C D 5 F 1 Headphones/earphone s 2 Stereo mini plug 3 Control VOL +, – Turn to adjust the volume . 4 5 6 7 8 9 q; qa qs 4 x (stop) button Jog lever (.• u/ENT• >) (Group) +, – button Clip HOLD switch Display window DISPLAY button P MODE / (play mode/repeat) button SOUND button 7 8 9 q; qa qs To Pause Do this (Beeps in the headphones/earphones) Press the jog lever (u) on the remote control (continuous short beeps). Press the jog lever (u) again to resume play. Cue to the current track or the previous track Slide the jog lever towards . on the remote control (three short beeps). (Press towards . on the player. ) Cue to the next track Slide the jog lever towards > on the remote control (two short beeps). (Press towards > on the player.) Go backwards or forward while playing Slide and hold the jog lever towards . or > on the remote control. (Press and hold towards . or > on the player. ) Searching for a specific position while viewing a elapsed time (Time search) While the player is paused, slide and hold the jog lever towards . or > on the remote control. Searching for a specific track while viewing track numbers or track names (Index search) While the player is stopped, slide and hold the jog lever towards . or > on the remote control. Cue to the beginning of every 10th track (only during playback of the disc with no group settings 1)) Press Remove the MD Press x, and then slide OPEN 2). 1) 2) + or – button. For more details, see “Using the group function.” Once you open the lid, the point to start play will change to the beginning of the first track (except when the disc information has been stored in the personal disc memory). About the “3-color info-LED” The LED indicates the current operating mode, charging status, and battery condition. For details about the charging status, see “Getting started.” For details about the battery condition, see “When to recharge the built-in battery” on the back page. LED color Operating status Red Playing a disc with no group settings Green Playing a disc with group settings Orange Cueing to the another group (Group Skip) MZ-E10 SECTION 3 DISASSEMBLY r The equipment can be removed using the following procedure. Bracket ASSY Set Panel ASSY (S), upper POWER board, MAIN board Mechsnism deck (MT-MZE10-184) CONTROL board Optical pick-up ASSY (ABX-1ES) Note : Follow the disassembly procedure in the numerical order given. 3-1. PANEL ASSY (S), UPPER 7 Panel ASSY (S), upper 4 1 Two screws (M1.4) 2 Claw Holder ASSY 3 Claw 6 5 Bracket ASSY 3-2. MECHANISM DECK (MT-MZE10-184) 1 Screw, step 6 Mechanism deck (MT-MZE10-184) 4 OP flexible board (CN501) 5 Motor flexible board (CN551) 3 2 Two claws 5 MZ-E10 3-3. BRACKET ASSY 7 Two screws (M1.4) Sheet (blind) 6 Screw (M1.4) 0 Bracket ASSY 9 Switch flexible board (CN801) 8 2 Plate, retainer 1 Screw (M1.4) 4 Lid (DC), battery case 3 5 Konb (power) 3-4. POWER BOARD, MAIN BOARD 1 Case, battery 2 Retainer, battery 3 Battery, lithium ion storage 4 POWER board 5 Power relay flexible board (CN952, CN953) 6 6 7 MAIN board ASSY MZ-E10 3-5. CONTROL BOARD Bracket ASSY 7 CONTROL board 6 Button (control) 4 Cover (control) 5 Switch flexible board (CN801) 3 Knob (open) 2 Remove three claws 1 Screw (M1.4) 3-6. OPTICAL PICK-UP ASSY (ABX-1ES) 3 Screw, tapping 6 Optical pick-up ASSY (ABX-1ES) 4 Spring, thrust detent 1 Washer (0.8-2.5) 2 Gear (SA) 5 Mechanism deck (MT-MZE10-184) 7 MZ-E10 SECTION 4 TEST MODE 4-1. GENERAL Remote control LCD • When entered in the TEST MODE, this set provides the Overall Adjustment mode which allows CD and MO discs to be automatically adjusted. In the Overall Adjustment mode, the system discriminates between CD and MO discs, performs adjustments in sequence automatically, and displays the faulty location if any fault is found. In the Manual mode, selected adjustments can be performed automatically. • The attached remote control is used to operate the TEST MODE. Unless otherwise specified in the text, the key means that on the remote control. u F 1SHUFPGM SOUND V-SUR 000 8 All on All off 001 V1.000 4-2. SETTING THE TEST MODE Microprocessor version display 4-2-1. How to set the TEST MODE To set the TEST MODE, two methods are available. 1 Solder bridge and short TAP602 (TEST) on the main board. Then turn on the power. • Press and hold down key is being pressed. MAIN BOARD (SIDE A) 7 FB601 18 Q951 1 19 24 C954 C957 TAP602 (TEST) R961 D951 R956 R959 1 C958 R964 R958 R957 R965 CN951 R604 956 1 2 C612 C617 IC951 5 C928 C960 R627 E C607 C608 R607 6 C606 R623 R620 8 R621 8 R622 13 C953 12 R 4-2-3. How to release the TEST MODE When method 1 was used: Turn off the power and open the solder bridge on TAP602 on the main board. Note: The solder should be removed clean. The remaining solder may make a short with the chassis and other part. When method 2 was used: Turn off the power. Note: If electrical adjustment (see page 11) has not been finished completely, always start in the test mode. 4-3. TEST MODE STRUCTURE Test Mode (Display Check Mode) VOL + key Manual Mode TAP602 SHORT: TEST MODE OPEN: NORMAL MODE x key Servo Adjustment Audio Adjustment 2 In the normal mode, operate the keys on the set and those on the remote control as specified below: Power Supply Voltage Adjustment Turn on HOLD switch on the set. Holding down x (STOP) key on the set, press the keys on the remote control in the following sequence: > t> t . t . t > t . t > t . t to hold the current display while the Charge Adjustment key VOL Overall Adjustment Mode t x 4-2-2. Operations when the TEST MODE is set When the TEST MODE is entered, the system switches to the display check mode within the TEST MODE. From this mode, the other Test modes can be accessed. When the TEST MODE is set, the LCD repeats a cycle of the following displays: key CD/MO Adjustment Power Supply Voltage Adjustment NV Initialize (Clear the Non-Volatile memory + key or DISPLAY key (Press and hold down about for more than2 sec) Key Check Mode Terminate key checking or open the top panel. 8 MZ-E10 4-4. MANUAL MODE 4. During each test mode, the display is changed from one to another each time DISPLAY key is pressed. 4-4-1. Outline of the function The Manual mode is designed to perform adjustments and operational checks on the set’s operation according to each individual function. The Manual mode is used to clear the memory before performing automatic adjustments in the Overall Adjustment mode. 1. Set the TEST MODE and press VOL + key to set the Manual mode. Remote control LCD display VOL + key : 100th place of mode number increase VOL key : 100th place of mode number decrease VOL + key : 10th place of mode number increase key : 10th place of mode number VOL decrease > key x address adjusted value • Jitter Value & Adjusted Value Display LCD display 011 O F F J 3 F mode number jitter value adjusted value • Block Error Value & Adjusted Value Display LCD display 011 0 0 0 B 3 F mode number key Change Middle Item adjusted value • Address & Adjusted Value Display LCD display mode number 2. During each test, press and hold down > key or . key for a while to move the optical pickup on the sled outer or inner perimeter. 3. Each test item is assigned with a three-digit item number. The 100th place is a major item, 10th place is a middle item, and unit place is a minor item. Note: Changes in adjustment item settings are written into the non-volatile memory. x mode number 011 A A A S 3 F 000 Manual > key 011 L r e f p w 3 F Item title 4-4-2. How to set the Manual mode Change Major Item • Item title Display LCD display block error value adjusted value • ADIP Error Value & Adjusted Value Display LCD display 011 0 0 0 A 3 F key Change Minor Item > key : Unit place of mode number increase . key : Unit place of mode number decrease Change Adjustment Value VOL + key : Up key : Down VOL mode number adjusted value • Focus drive voltage value & Adjusted value LCD display 011 0 0 0 F 3 F mode number Write Adjustment Value key : When adjusted value is changed : Adjusted value is written. When adjusted value is not changed : That item is adjusted automatically. ADIP error value adjusted value Focus drive voltage value Note: In the Power mode, the item title display is only displayed. 5. To terminate the Manual mode and return to the TEST MODE, press x key. 4-5. OVERALL ADJUSTMENT MODE 4-5-1. Outline of the function This mode is designed to adjust the servo system automatically by going through all the adjustment items. Usually, this mode is used to perform automatic adjustments when servicing the set. For further information, refer to section 5. ELECTRICAL ADJUSTMENTS. (See page 11) 9 MZ-E10 4-6. KEY CHECK MODE 4-6-1. Outline of the function This mode is used to check to make sure that each of the keys (including the slide switch) on the set operates normally. 4-6-2. Setting the Key Check mode 1. Set the TEST MODE. Press and hold down DISPLAY key (for more than 2 sec) to set the Key Check mode. LCD display 000 XX 2. When each key on the set and on remote control is pressed, its name is displayed on the LCD. (The operated position is displayed for 4 sec after the slide switch is operated. If any other key is pressed during this display, the LCD switches to its name display) Example: When > key on the set is pressed: LCD display 000 FF XX Example: When > key on the remote control is pressed: LCD display 000 rFF XX XX: AD value of the remote control key (hexadecimal 00 to FF) 3. When all the keys on the set and on the remote control are considered as OK, the following displays are shown. (The key pressed to enter the Key Check mode has been checked even if it is not pressed in this mode) Example: When the keys on the set are considered as OK: LCD display SET OK XX Example: When the keys on the remote control are considered as OK: LCD display RMC OK XX 4. When all the key have been checked or when the top panel is opened during this checking, the system terminates the Key Check mode and return to the TEST MODE. Note: Slide switch can checked as OK by ON t OFF t ON (or reverse) operation. 10 MZ-E10 SECTION 5 ELECTRICAL ADJUSTMENTS 5-1. GENERAL In this set, CD and MO discs can be automatically adjusted by setting the Overall Adjustment mode within the TEST MODE, Before performing these automatic adjustments, it is necessary to clear the memory, adjust the power charge and temperature in the Manual mode. 5-3-2. Changing Adjustment values Adjustment settings are cleared when NV initialize is performed. So right after performing NV initialize you must rewrite the correct data according to the microcomputer version. • Adjustment value change method 1 • Adjustment value change method 2 (Perform after the 7 charging adjustment) 5-2. NOTES FOR ADJUSTMENT 5-2-1. Jigs • CD disc TDYS-1 (part code: 4-963-646-01) • MO disc PTDM-1 (part code: J-2501-054-A) (recorded) • Digital voltmeter • Thermometer 5-2-2. Adjustment sequence The adjustments should be always performed in the following sequence: 1 NV Initialize (Clear the Non-Volatile memory) Overall adjustment mode 2 Power supply voltage adjustment 5-3-3 Adjustment value change method 1 (when using Version 1.000) 1. In test mode press the VOL + key and then switch to Manual mode. 2. Set 861 as the item number. LCD display 861 VarB1k 00 3. Press the key. 4. Press the > key and set 862 as the item number. LCD display 862 VarWrt 00 3 Charge adjustments Manual mode 4 Temperature adjustment 5. Press the key, and set in Adjustment change mode. 862 88C6 5 Overall CD adjustments FF Overall adjustment mode This section (address) flashes. 6 Overall MO adjustments Manual mode 7 RESUME clear 5-2-3. Power In overall adjustment, the power is supplied from the internal battery (Li-Ion) and the charging stand simultaneously. Turn S901 (BUILT-IN BATTERY) to ON. Note: Be sure to place the set horizontally on the overall adjustment. 5-3. NV Initialize (Clear the Non-volatile memory) 6. Press the x key. LCD display 862 88C6 FF This section (data) flashes. 7. Press the VOL + and VOL – keys and set the value in the flashing data section while referring to the adjustment data change list. LCD display 5-3-1. How to NV Initialize 1. Set the Test mode. 862 88C6 3F 2. Press the VOL – kye and set the Overall adjustment. 3. Press key on the remote control. LCD display 000 Res OK? 4. Press key on the remote control again. LCD display 000 Res *** 8. Press the Data value. key. and the address section starts flashing. 9. Press the VOL + key and set the next adjustment address. LCD display 862 88C7 FF This section (address) flashes. 10.Press the x key. LCD display After initialize is completed. 862 88C7 FF 000 Reset 5. Press x key. to terminate the Manual mode and return to the Overall adjustment mode. Note: The power, charging and temperature adjustment settings are not cleared during NV initialize. This section (data) flashes. 11.Repeat the adjustments in items 6 - 9 and set up through address 88D3 while referring to the Adjustment Data Change List. 11 MZ-E10 12.Press the LCD display key. (Address section starts flashing.) 862 88D3 FC 24.Press the LCD display key to return to Manual mode. 862 VarWrt 01 This section (address) flashes. 13.Press the LCD display key to return to Manual mode. 862 VarWrt 00 14.Press the key and write in the correction data. 15. Press the > key and 862 as the item number. LCD display 862 VarWrt 01 Data value. 16.Press the LCD display key, and set in Adjustment change mode. 862 88C6 FF This section (address) flashes. 17. Press the x key . (FF section (data) flashes) 18.Press the VOL + and VOL – key and set the value in the flashing data section while referring to the adjustment data change list. LCD display Data value. 25.Press the key and write in the correction data. 26.Turn off the power. Note: Always turn off the power after changing the adjustment settings. Adjustment Data Change List If adjustment data is VarWrt is 00 If adjustment data is VarWrt is 01 Version 1.000 Version 1.000 Address Adjustment Data Address Adjustment Data 88C6 3F 88C6 07 88C7 03 88C7 8D 88C8 D6 88C8 FF 88C9 22 88C9 FF 88CA C4 88CA FF 88CB 37 88CB FF 88CC C2 88CC FF 88CD 04 88CD FF 88CE E8 88CE FF 88CF 42 88CF FF 88D0 6E 88D0 FF 88D1 FC 88D1 FF 88D2 71 88D2 FF 88D3 FC 88D3 FF 5-4. POWER SUPPLY VOLTAGE ADJUSTMENTS 862 88C6 07 Data value. 19.Press the key, and the address section starts flashing. 20.Press the VOL + key and set the next adjustment address. LCD display 862 88C7 FF This section (address) flashes. 21. Press the x key . (FF section (data) flashes) LCD display 22.Press the VOL + and VOL – key and set the value in the flashing data section while referring to the adjustment data change list. LCD display 5-4-1. Adjustment sequence The adjustments should be always performed in the following sequence: 1 LEG1 adjustment (item No.:741) r 2 VC1 adjustment (item No.:742) r 3 VC2 adjustment (item No.:743) r 4 Class-D power supply adjustment (item No.:744) 5-4-2. REG1 adjustment method 1. Supply power (DC 6.0 volts) from the charging terminal CN951. 2. Set the Test mode. 3. Set the overall adjustment mode and press P.MODE/F key, item No. will change to 741. LCD display 741 Reg1 XX 4. Connect a digital voltmeter to TP908 (REG1) on the main 862 88C7 8D Data value. 23.Press the 12 key, and the address section starts flashing. board and adjust VOL + (voltage up) key and VOL – (voltage down)key on the remote control. MZ-E10 Adjustment value:1.05V Standard value:1.04 to 1.055V 3. Press key to write the adjustment value, item No. will change to 743. MAIN BOARD (SIDE A) 5-4-4. VC2 adjustment method 1. Set the overall adjustment mode and set the item No. to 743. C C 37 C202 LCD display 743 Vc2 XX TP908 (REG 1) R921 C910 R908 2. Connect a digital voltmeter to TP907(VC2) on the main board C926 912 R911 C916 L904 C922 C908 1-686-492- and adjust VOL + key (Voltage down) and VOL – key (Voltage up) on the remote control. Adjustment value:1.15V Standard value:1.15 to 1.18V MAIN BOARD (SIDE A) digital voltmeter TP907 (VC2) TP908 (REG1) R921 R908 C910 C926 C916 12 R911 5. Press key to write the adjustment value, item No.will change to 742. C922 C908 L904 1-686-492- digital voltmeter 5-4-3. VC1 adjustment method 1. Set the overall adjustment mode and set the item No. to 742. LCD display TP907(VC2) 742 Vc1 XX 2. Connect a digital voltmeter to TP902 (VC1) on the main board and adjust VOL + key (Voltage up) and VOL – key (Voltage down) on the remote control. Adjustment value:2.15V Standard value:2.14 to 2.155V MAIN BOARD (SIDE A) 3. Press key to write the adjustment value, item No. will change to 744. 5-4-5. Class-D power supply adjustment method 1. Set the overall adjustment mode and set the item No. to 744. LCD display 744 Cls D XX 2. Connect a digital voltmeter to TP909 (Class-D) on the main R921 R908 C910 TP902(VC1) C916 12 R911 C922 C908 C926 board and adjust VOL + key (Voltage up) and VOL – key (Voltage down) on the remote control. L904 1-686-492- digital voltmeter TP902 (VC1) 13 MZ-E10 2. Set the manual mode, item No. will change to 754. Adjustment value:1.75V Standard value:1.75 to 1.80V LCD display MAIN BOARD (SIDE A) 754 ChgV L XX TP909 HOLD (CLASS-D) 3. Connect a digital voltmeter to TP962 on the main board and t C104 IC301 digital voltmeter 1 7 MAIN BOARD (SIDE A) D 12 D 7 13 6 C953 8 IC951 D E 18 19 TP909(CLASS-D) 24 digital voltmeter C954 R965 C957 TP962 D95 CN951 000 ADJ OK TP962 56 R959 R961 1 C958 R964 3. Press key to write the adjustment value, LCD display. Q 1 R957 14 C204 R317 R318 R819 R818 C301 adjust VOL + (voltage up) key and VOL – (voltage down) key on the remote control. Adjustment value:3.40V Standard value:3.395 to 3.405V R958 C302 4. Press the x key and return to the test mode. LCD display. 4. Press 5-5. CHARGE ADJUSTMENTS 5-5-4. Charge voltage (H) adjustment method 1. Set the Manual mode and set the item No. to 755. 2. Connect a digital voltmeter to TP962 on the main board and adjust VOL + key (Voltage down) and VOL – key (Voltage up) on the remote control. Adjustment value:4.20V Standard value:4.2 to 4.21V MAIN BOARD (SIDE A) 7 13 6 IC951 LCD display 18 751 ChgIOf 19 XX 24 digital voltmeter C954 R965 1 5-5-3. Vc PWM Duty (L) adjustment method 1. Set the Test mode. CN951 3. Press 14 R959 R961 R964 C958 key to write the adjustment value. Q 1 C957 4. Press C953 12 5-5-2. Current amplifier offset adjustment 1. The power supply of 3V is supplied to TP951 on the main board. 2. Set the Test mode. 3. Set the manualmode, item No.will change to 751. R957 1 Current amplifier offset adjustment (item No.:751) r 2 Change voltage (L) adjustment (item No.:754) r 3 Change voltage (H) adjustment (item No.:755) r 4 Current Amplifier (L) adjustment (item No.:752) 755 ChgV H XX R958 5-5-1. Adjustment sequence The adjustments should be always performed in the following sequence: LCD display TP962 TP962 D95 56 Note: Always remove the internal battery (Li-Ion) before making charging adjustments. key to write the adjustment value. key to write the adjustment value. MZ-E10 5-5-5.Current Amplifier (L) adjustment method 1. Connect TP953 to TP959 on the main board. 2. Set the test mode. 3. Set the Manual mode and set the item No. to 752. LCD display 4. Adjust with the remote control VOL + and VOL – keys so that the temperature value is at room temperature. Reset value: 19h = 25 C Adjustment range: 80h to 7Fh = -128 C to +127 C 5. Press the key and write in the adjustment value. 752 ChgI L XX 5-7. OVERALL ADJUSTMENT MODE 4. Press key to write the adjustment value. 5-7-1. Overall adjustment mode structure 5-5-6. Adjustment value change method 2 (when using Version 1.000) 1. Set in Manual mode and then set item number 026. LCD display TEST MODE (Display Check Mode) 026 NvWrt CC Overall Adjustment Title Display(ASSY**) 2. Press the LCD display key. VOL — key . key 026 8200 ** > key This section (address) flashes. ** 4. Press the x key. LCD display 026 828A key two times MO overall Adjustment x key x key x key NV Initialize P.MODE/F key Power Supply Adjustment ** This section (data) flashes. 00 6. Press the key. 7. Press the LCD display key to return to Manual mode. 026 NvWrt CC 8. Press the key Note: The overall adjustments should be always performed in the sequence of CD t MO adjustments. 5. Press the VOL + and VOL – keys and set 00 in the flashing data section. LCD display 026 828A x > key 3. Press the key (100th place) and the VOL + key (10th place) and set 828A in the flashing address section. LCD display 026 828A CD overall Adjustment key and write in the adjustment setting. 5-6. TEMPERATURE ADJUSTMENT [Temperature adjustment method] 1. Set in Test mode. 2. Set in Manual mode and set the item number 014. LCD display 014 AdjTmp XX 5-7-2. Total Adjust mode title display Switching to Total Adjust Mode sets the following All Adjust mode title display on the LCD. LCD display 000 Assy ** : Disk mark (outer) lights up when power adjustment is complete. Disk mark (inner) not used ** : Left side is MO alignment information F* : MO total alignment is complete 1* : Manual alignment (not part of total adjustment) 0* : Not adjusted Right side is CD alignment information F* : CD total alignment is complete 1* : Manual alignment (not part of total adjustment) 0* : Not adjusted 5-7-3. Overall CD and MO adjustment method 1. Set the TEST MODE and press VOL – key to set the Overall Adjustment mode. LCD display Item No. 3. Measure the temperature. Adjustment setting 000 Assy11 15 MZ-E10 2. Insert CD disc in the set, and press . key to set the Overall CD Adjustment mode. Automatic adjustments are made. 3. Press the key. LCD display 043 Res *** LCD display XXX CD RUN XXX: Item No. for which an adjustment is being executed. 3. If NG in the overall CD adjustments, return to Reset NV and perform from the overall CD adjustment again. LCD display 000 XXX NG YY XXX: NG item No. YY: adjusted valive. 4. If OK through the overall CD adjustments, then perform overall MO adjustments. LCD display After reset is completed LCD display 043 Res C1r 5-7-5.Resume clear method When the battery exchange was done. 1. Setting the testmode. 2. Set the Manual mode and set the item No.043(RESUME Clear). LCD display 043 Resume 00 3. Press the VOL + key two times, and set the adjustment value to 02. 043 Res 000 CD OK 5. Insert MO disc in the set, and press > key to set the Overall MO Adjustment mode. Automatic adjustments are made. 4. Press the key. LCD display 043 Res *** LCD display XXX MO RUN XXX: Item No. for which an adjustment is being executed. After reset is completed LCD display 043 Res C1r 6. If NG in the overall MO adjustments, return to NV initiale and perform from the overall CD adjustments again. LCD display 000 XXX NG YY XXX: NG item No. YY: adjusted valive. 7. If OK through the overall MO adjustments, press x key to return to the test mode. LCD display 000 MO OK 5-7-4.Resume clear method When the battery exchange isn't being done. 1. Setting the testmode. 2. Set the Manual mode and set the item No.043(RESUME Clear). LCD display 043 Resume 00 16 02 5-7-6. Overall CD and MO adjustment items 1. Overall CD adjustment items Item No. Contents 312 ALFA offsetadjustment 313 IJ offset adjustment 314 FE offset adjustment 320 Focus servo ON 324 TE offset adjustment 321 TE gain adjustment 328 TWPP gain adjustment 824 twpp-gain[H]+4 t twpp-gain[L] 324 TE offset adjustment 330 Tracking servo ON 336 ABCD gain adjustment 337 KF gain adjustment 338 RF gain adjustment 344 CD focus gain adjustment 345 CD tracking gain adjustment 521 CD two-axis sensitivity adjustment (inside) 522 CD two-axis sensitivity adjustment (outside) MZ-E10 2. Overall MO adjustment items Item No. Contents 5. Press the VOL + key and set the adjustment setting to 01. LCD display 112 ALFA offset adjustment 113 IJ offset adjustment 114 FE offset adjustment 118 AW DW OFFSET 224 TE offset adjustment 221 TE gain adjustment 224 TE offset adjustment 236 ABCD gain adjustment 237 KF gain adjustment 238 RF gain adjustment 244 Focus gain adjustment 245 Tracking gain adjustment 120 Focus servo ON 8. Press the VOL + and VOL – keys and set the adjustment data while referring to the patch data list. 122 TE offset adjustment (TON) 9. Press the 121 TE gain adjustment 122 TE offset adjustment (TON) 123 TE offset adjustment (TEIN) 10. Press the VOL + keys and set the address value in the next address for adjustment. LCD display 124 TE offset adjustment (TWPP) 130 Tracking servo ON 131 TE offset adjustment (TWPP/RF) 136 ABCD gain adjustment 137 KF gain adjustment 144 FCS gain adjustment 145 Tracking gain adjustment 139 BPF fo adjustment 134 TWPP gain adjustment 131 TE offset adjustment (TWPP/RF) 132 TE offset adjustment (TWPP/DSP) 138 RF gain adjustment 35 GOD offset correction. 023 Patch 01 6. Press the LCD display key. 022 PatClr CC Data. This section (address) flashes. 7. Press the x key. (The data section flashes.) key and the address section flashes. 023 8922 00 This section (address) flashes. 11. Press the x key. LCD display 023 8922 5-8. REWEITING PATCH DATA AFTER REPLACING THE NONVOLATILE MEMORY Rewrite the program correction data after replacing the nonvolatile memory. 5-8-1 Method for rewriting the corrected data (when using Version 1.000) 1. Set in Test mode. 2. Set in Manual mode and enter the item number 022. LCD display 00 This section (data) flashes. 12. While referring to the patch data table repeat the data correction write procedure from steps 8 through 11 until the address 899E is set. 13. Press the key. (The address value flashes.) 14. Press the LCD display key to quit the patch data write mode. 023 Patch 01 15. Press the LCD display LCD display key. 023 Patch CC 022 PatClr CC After finished writing data. Data. 3. Press the key to reset the patch data. (Writing is complete if the setting changes to DD.) LCD display LCD display 023 Patch DD 16. Turn off the power. 022 PatClr DD 4. Press the > key and enter the item number 023. LCD display 023 Patch 00 17 MZ-E10 Varsion 1.000 Address 18 Data Address Data 8921 02 8962 DE 8922 F7 8963 03 8923 F4 8964 E5 8924 02 8965 81 8925 06 8966 C3 8926 A9 8967 94 8928 03 8968 05 8929 2A 8969 F8 892A FD 896A 76 892B 01 896B 2E 892C 12 896C 08 892D 06 896D 76 892E B3 896E FD 8931 02 8971 D0 8932 15 8972 E0 8933 95 8973 B4 8934 02 8974 02 8935 0A 8975 02 8936 66 8976 D3 8938 02 8977 22 8939 D1 8978 C3 893A B3 8979 22 893B 02 897A 6C 05 893C 06 897B 893D BD 897C 0A 8941 81 897D 30 8942 B2 897E 1A 8943 81 8981 02 8944 C3 8982 74 8945 81 8983 FF 8946 E2 8984 F8 8947 E4 8985 D0 8948 90 8986 E0 8949 87 8987 D0 894A 75 8988 E0 894B F0 8989 D0 894C E5 898A E0 894D 81 898B 74 894E C3 898C F8 8951 94 898D C0 8952 04 898E E0 8953 F8 8991 74 8954 76 8992 B3 8955 19 8993 C0 8956 08 8994 E0 8957 76 8995 74 8958 E9 8996 02 8959 22 8997 C0 895A C0 8998 E0 895B E0 8999 E8 895C 12 899A 02 895D 20 899B 06 895E 7D 899C CF 8961 8C 899E 01 MZ-E10 SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAMS IC301 HEADPHONE AMP (D CLASS AMP) IC501 Iy RF AMP,FOCUS/TRACKING ERROR AMP 12 Jx VREF 7 VREF10 Iy 7 6 56 1 54 55 50 51 52 49 Ix Jx 8 Jy 9 A 5 B 4 C 3 2 D Jy Jx Jy Jx A Ix Iy Ix B Iy Ix Jx Jy A B C D EFMO 37 NC RFI 40 RF OUT 9 PEAK 48 BOTM 47 EFM COMP Ix RF AMP, FOCUS ERROR, TRACKING ERROR PEAK /BOTM a bc d F 16 D-C 15 C 13 D MON 12 PD PD-NI ADIP IN PD-NI APC VCC-2 LASER DRIVER Q501 LD LD-K S0 S0 S1 VCC S1 VCC 14 S MON CLK POWER SUPPLY 18 14 RF TEMP MON 26 122 VC 24 AMICE CLK PWM IC551 20 TRACKING COIL 17 18 FOCUS COIL TRK+ FOCUS/TRACKING COIL DRIVE, SPINDLE/SLED MOTOR DRIVE TRK- FCS+ 45 18 17 19 OUT2R SLDW M902 SLED MOTOR SLDV M SLDU SLDN 20 21 VS1 VG1 D803 HOLD SW 88 SET KEY 16 S803 (OPEN/CLOSE) OUT1R VOL- TAP603 IC601 S802 GROUP M901 SPINDLE MOTOR M CLVU CLVN 40 38 39 20 VI2DET CHG_CTL SW SVO PRE DRIVER LOGIC S1 8 S2 9 S3 10 SLCOM VG1 SPVS 16 I_CTL1 NV XCS SI02 CLK SI02 DO SI02 DI 80 SLPWMF 81 SLPWMR 82 SLD0 CHG MON CHG PWM CHG AMP SEL CHG AD SEL XCHGI LIMIT CHG VI MON 6 5 7 8 17 39 38 32 29 13 1 2 3 4 CHG MON CHG CTL CHG AMP SEL CHG AD SEL XCHGI LIMIT CHG VI MON 68 4M 7 6 5 VG UNREG MON 10 UOUT SPCOM LOGIC SPBR 47 SPPWM 42 SPFG 37 76 SPPWMR 75 SPPWMF 66 FF S104 DO 3 PWR STRB 37 S104 CLK 196 PWR CLK PWM 23 PWR SLEEP 36 PWR EFCLR 35 19 S104 DO PWR STRB S104 CLK 176K PWR SLEEP PWR EFCLR L 23 18 Q951 17 6 V IN2 D951 7 LITHIUM-ION RECHAGEABLE BATTERY Li-ion 1PC, 3.7v 8 IN29 OUT2 10 BAT_SEL 11 EEPROM 4 NC 3 S901 BUILT-IN BATTERY Q903 VB 55 MUTE ON XRST2 27 LVB 7 Q952 VSTB 9 XWK3 3 VCO1 11 VCOUT 37 VCIN 38 Q901 L901 IC952 VB DETECT Q953 DIFFERENTIAL RMC KEY1 SI04 DO PWR STRB SI04 CLK 176K PWR SLEEP PWR FFCLR 19 VBAT IC801 OUT 1 VCC-1 H A/D 3 4 I_SEL 5 AD_SEL CHG AD SEL XCS SK DI DO 2 IN S/S VG1 PRE DRIVER GND VO CHG MON CHG AMP SEL WOUT VOUT RF1 FOR STAND CHARGER 14 WK DET SLVS 84 SLD2 83 SLD1 85 SLD3 VG VG 12 VI 24 IN1- S/S SWO VOL- IC951 2 73 FOPWMF 74 FOPWMR SLPWM 19 SLFG 24 ISEL1 12 > N CHAGER CONTROL 71 TRPWMF 72 TRPWMR IN1F 13 IN1R 14 VCC CLVV REW/PB XRESET 192 CLK 41 . S801 CHG VI MON CHG CTL S/S LOGIC S801 VOL+ CHARGE CONTROL IN2F 3 IN2R 4 SUO 35 STOP FF/PB VCC-1 VCC-2 CLVW VOL+ OPEN CLS SW 15 OUT1F PRE DRIVER RMC-VDD S804 HOLD N ON OFF D802 (G) 107 XOUT 23 22 OPR LED G PWM 41 (O) LED DRIVER Q802 XCHG I LIMIT VG1 26 OPR LED O CTL 30 X601 16.9344MHz S/S LOGIC RMC-DTCK VCC-1 D801 51 XDISC DET FCS16 4 OUT2F PRE DRIVER J301 i D-GND RMC-KEY 1 3 106 XIN 48 S/S 44 Q301,302 BOOSTER R-CH 2,4 Q304 REGULATOR (R) DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO SIGNAL PROCESSOR, EFM/ACIRC ENCODER/DECODER, SHOCK PROOF MEMORY CONTROLLER, 16M BIT D-RAM, SYSTEM CONTROL ATRAC ENCODER/DECODER D/A CONVERTER L501 VG1 IC302 L-CH A-GND REC KEY 2 47 XRF RESET 160 SBUS DATA 21 SBUS CLK VCC-2 43 VS2 6,5 Q102,202 MUTE BEEP DRIVER 4 EN1 11 EN2 3 VG Q904 7 VDD0 • 8 8,7 139 ADIPW0 50 XSLPMIR OP 46 PDS1 UNREG 9 1 D VO PWM 40 RMC KEY1 12 RMC DTCK 19 104 LDREF 11 RFVCMON 13 1 10 OPTICAL PICK-UP BLOCK (ABX-1ES) OUT2 6 1 MCK D EN1 45 D EN2 52 19 RESET 35 SBUS 33 SCK 32 S-MONITOR PD-O 15 11 IN2 OPR LED R PWM 42 14 16 OUT1 14 AVCC SERIAL I/F LD-A 12 F16M 57 125 ABCD 123 FE 124 TE VC 8 AFDG 23 ADIP DVDD D RPWM+ 112 Q303 IN1 VCC-1 127 PEAK 126 BOTTOM 41 FE 42 TE 43 NPPO 44 TPP/WPP 3 136 EFMIN ABCD A-C D LPWM+ 110 10 16 13 14 5 4 2 62 58 59 60 63 64 1 VCI VC1G L1 L1 XWK1 XWK2 XWK4 SEQSEL DATA STRB SCK CLK SLEEP FFCLR ON r 1,2 5,6 RESET HVB 8 VB VB 26 REGO1 43 L2 SERIES PASS 44 REGULATOR VC2 42 36 LVB DRIVER VC SWITCH CONTROL VG VG SETUP DRIVER UNREG VDD L903 Q902 VC2G 32 L2 SETUP DRIVER L2 VB VC OFF VG 34 35 VG 23 D902 CONTROL SETUP DC/DC CONVERTER LG 24 L903 D904 IC901 C1L 22 VGH DC/DC CONVERTER • Signal path. F : Analog J : Digital MZ-E10 : Uses unleaded solder. 6-2. PRINTED WIRING BOARDS – MAIN SECTION (1/2) – 3 2 1 z 4 See page 25 for Notes. 5 6 8 7 9 10 A 1 3 CN801 z C804 CONTROL BOARD (SIDE A) HOLD C302 CONTROL BOARD (SIDE B) S804 HOLD B ON C104 t C301 t TP909 (CLASS-D) R813 14 R816 8 7 1 R815 R812 IC301 11 (11) 1-686-491- L101 > B E VOL – C C310 IC952 C312 C525 2 4 R953 FOR STAND CHARGER TAP602 TEST MODE D951 C606 C928 C960 C955 C956 1 2 5 CN952 C626 R618 R617 R601 C604 C603 R967 R603 G IC801 5 R915 D R905 C925 R906 C904 16 17 C903 C909 L902 C917 * D D903 L901 IC601 D902 C902 C601 D L903 C951 G Q902 20 S 20 C520 C555 Q901 C557 D C901 R903 C923 C907 C911 1 64 IC901 C906 R916 C912 R554 C556 FB101 8 1 TP908 TP907 (REG1) (VC2) 24 Q102 7 R306 5 Q303 4 Q202 13 25 12 IC551 36 1 37 C202 CN551 8 1 FB803 FB801 R501 C803 R802 R803 C512 R507 R506 C515 C552 8 D904 FB201 R102 C553 Q903 G S D R917 R615 C622 1 D 48 C102 R921 R908 C910 C926 R912 R911 32 33 48 C916 CN951 TP951 TP953 C801 R955 4 R961 C958 1 R959 R964 G S R801 R901 R902 C920 C957 R958 R957 C954 R956 R965 24 C554 R602 C924 TP959 19 C621 D101 D201 R204 R104 C905 1 R614 R918 R909 C913 R919 C915 Q951 R610 C616 R609 C614 C929 18 C612 C617 IC951 R627 E C607 C608 R607 6 R623 R620 C628 R621 C605 R628 R622 R817 13 R611 C613 R608 C609 C611 R606 R605 FB601 C620 C610 R613 C619 C618 7 J301 i C851 C303 Q304 D301 X601 C953 12 1 BCE MAIN BOARD (SIDE A) R302 E Q904 C311 5 6 7 8 1 R303 C305 R305 D851 C309 M C306 C852 R307 M902 SLED MOTOR Q952 3 R951 R313 M 1 2 3 4 R914 R552 R551 M901 SPINDLE MOTOR C921 C509 E R553 11 (11) C519 R518 R202 R516 C304 E IC302 C307 5 ECB R561 R563 R301 4 R804 R562 C511 BCE R564 1-686-490- E FB802 L552 4 5 Q953 BCE BCE F C507 C508 R505 C510 L501 L551 E H C505 Q501 C551 C558 POWER BOARD (SIDE B) 11 (11) 1-686-490- 1 2 C502 E R311 C805 S803 (OPEN/CLOSE) Q302 ECB LITHIUM–ION RECHARGEABLE BATTERY LIP–3WMB 1PC,3.7V 340mAh Li–ion C518 OPTICAL PICK-UP BLOCK ABX–1ES C536 R502 CN954 ON t OFF S901 BUILT–IN BATTERY C501 C503 5 CN953 * IC501 R904 R504 1 D R310 R509 POWER BOARD (SIDE A) 5 C308 1 3 Q301 E R315 C959 R952 R309 R312 R511 C535 C534 C533 C532 C527 C523 R510 C513 R513 C526 C506 CN501 R514 S802 GROUP C201 L201 1 GROUP D801 49 C952 C922 C908 Ref. No. Location D101 D201 D301 D801 D802 D803 D851 D902 D903 D904 D951 E-9 E-9 F-9 B-9 B-9 B-9 E-9 G-6 G-6 G-7 G-3 IC301 IC302 IC501 IC551 IC601 IC801 IC901 IC951 IC952 B-9 D-9 D-8 G-9 G-4 G-5 G-7 F-2 C-8 Q102 Q202 Q301 Q302 Q303 Q304 Q501 Q802 Q901 Q902 Q903 Q904 Q951 Q952 Q953 F-9 F-9 C-9 D-9 F-9 E-8 D-8 C-9 G-7 H-5 G-6 E-8 G-3 E-7 E-7 Q802 VOL + > D802 E 11 (11) 1-686-491- S801 OFF D803 R304 R814 R811 B C204 R317 R318 R819 R818 1 CN802 C101 3 Semiconductor Location L904 TP902 (VC1) 1-686-492- 11 (11) MZ-E10 6-3. PRINTED WIRING BOARDS – MAIN SECTION (2/2) – 1 2 3 : Uses unleaded solder. 4 z See page 25 for Notes. 5 6 7 8 9 MAIN BOARD (SIDE B) A B C D E F G H 1-686-492- 21 21 11 (11) MZ-E10 6-4. SCHEMATIzC DIAGRAM – MAIN SECTION (1/3) – z See page 25 for Notes. z See page 26 for IC Pin Function Description. VSTB SIO4 DO XD MUTE R620 10k R602 47k S803 (OPEN/CLOSE) MRASB MAD0 MAD1 MAD2 SIO4 CLK MAD3 VSS VDD XRESET TEST3 TEST2 TEST1 TEST0 DEDATA VCC2 DECLK DEFECT PCK ADR17 VSS ADR16 ADR15 ADR14 ADR13 ADR12 ADR11 MAD4 VCC2 VSS MAD5 VDD ADR10 ADR9 MAD6 ADR8 MAD7 ADR7 ADR6 MAD8 MAD9 MOEB MCASB ADR5 ADR4 ADR3 ADR2 ADR1 ADR0 FCEB FOEB C613 0.047 C611 1000p R611 2.2k C616 0.1 R610 4.7k R816 10k XRESET VCC XBUSY RST GND R801 1M IC801 AK6417AL-L EEPROM DGND VCC AGND VDD C619 0.1 C618 470p 22 C801 0.1 OPR GND R615 10k R613 470 R814 4.7k TAP603 SIO4 CLK XCS SK DI DO SIO4 DO XD MUTE MWEB R608 4.7k C608 0.047 C612 0.1 R813 4.7k C805 0.01 C622 0.047 C610 0.1 R607 2.2k X601 16.9344MHz R811 2.2k R812 2.2k NV XCS SIO2 CLK SIO2 DO SIO2 DI C601 0.1 C626 0.022 C609 0.1 S801 VOL+ OPEN CLS SW R605 1M R606 0 CN802 3P GND XWK1 SET KEY VOL- ADIPWO ON CN801 3P S802 GROUP R614 4.7k C621 0.1 OFF HFL EFMIN TAP602 C620 4700p S804 HOLD C617 0.1 SLPWMF SLPWMR SLD0 SLD1 SLD2 SLD3 R609 10k C607 0.1 BUS XWK1 SET KEY * IC601 LC896442-VH4-16-E DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO SIGNAL PROCESSOR, EFM/ACIRC ENCODER/DECODER, SHOCK PROOF MEMORY CONTROLLER, ATRAC ENCODER/DECODER, D/A CONVERTER,16M BIT D-RAM SYSTEM CONTROL CSP(Chip Size Package) C614 0.1 TRPWMF TRPWMR FOPWMF FOPWMR SPPWMF SPPWMR SMON FE TE ABCD BOTTOM PEAK 4M D LPWM+ D RPWM+ FG C606 0.1 C804 470p XSLP MTR OP MSON4 (LOCAL CHK 3) XRF RESET C605 0.1 LDREF R627 0 FB601 D CLK XDISC DET D EN2 SMON0 SMON1 SMON2 SMON3 F16M MD7 MD6 MD5 MD4 VCC2 MD3VCC2 MECNT0(OPEN:MASK/L:FLASH) MECNT1 FG MD2 4M MD1 MD0 TRPWMF TRPWMR FOPWMF FOPWMR SPPWMF SPPWMR VSS VCC2 VDD SLPWMF SLPWMR SLD0 SLD1 SLD2 SLD3 (LOCAL CHK 3) VSS HOLD SW MD15 MD14 XADJUST XPATCH MD13 TYPE3 MD12 TYPE2 VSS MD11 MD10 MD9 R618 470k R622 10k MD8 T1YPE TYPE0 LDREF VSS XIN XOUT VDD DPVSS D LPWM+ D LPWMD RPWM+ D RPWMD CPWM DVPP VVDD VPDD VVSS AVSS1 AVDD1 AUX VC FE TE ABCD BOTTOM PEAK AVDD1 VCVSS ISET FR VCVDD PDO JITTREC HFL EFMIN SLCISET SLCO ADIPWO VCC2 VSS DATA0 DATA1 DATA2 DATA3 DATA4 DATA5 DATA6 DATA7 FWEB D EN2 UNREG R617 220k PD S1 D EN1 VSS VDD OPR LED R PWM OPR LED G PWM D VO PWM CHG PWM CHG AMP SEL PWR STRB PWR SLEEP PWR FFCLR VSS VCC2 CHG AD SEL (LOCAL CHK1) OPR LED O CTL CHG I LIMIT DRV SLED1 INT DRV FG INT DSP WRQB DSP INTB AMICE CLK PWM PWR CLK PWM SBUS DATA SBUS CLK (RMC SPCK) RMC DTCK AVDD CHG MON SET KEY OPEN CLS SW RF TEMP MON CHG VI MON RMC KEY1 RF VCMON UNREG MON AVSS SIO2 DI SIO2 DO NV XCS SIO2 CLK (SIO4 DI) C603 0.1 R628 22k R603 2.2k C628 0.047 Q802 XP4214-TXE LED DRIVE R601 220k R621 100k R623 10k D803 R818 TLGE1008A 2.2 SIO2 DI SIO2 DO NV XCS SIO2 CLK CHG MON SET KEY OPEN CLS SW SMON CHG VI MON RMC KEY1 RF VCMON RMC DTCK CHG I LIMIT AMICE CLK PWM 176K SBUS DATA SBUS CLK C604 0.1 CHG AD SEL D VO PWM CHG PWM CHG AMP SEL PWR STRB PWR SLEEP PWR FFCLR D802 R819 TLOE1008A 470 R817 220 XRF RESET PD S1 D EN1 D801-803 GROUP XSLP MTR OP D801 TLRE1008A 22 R815 10k MZ-E10 R501 10k L501 10µH A B C D XSLP MTR OP C536 0.047 R502 1k R504 1 C508 2200p R505 100k R516 2.2k Q501 2SA1577-T106-QR LASER DRIVER 1 C511 10 4V TE HFL R510 C523 R511 10k 0.01 10k C512 4700p C513 4700p C525 0.01 XRF RESET R518 0 R506 0 SBUS DATA SBUS CLK R507 0 R509 0 C520 1 C519 1 C518 0.047 C509 0.1 UNREG 5 MON C510 10 6.3V JY JX IY IX * IC501 SN761058ZQL RF AMP,TRACKING/FOCUS ERROR AMP CSP(Chip Size Package) FE ABCD BUS PD S1 C506 4700p C507 0.1 R513 0 FE ABCD RFI ASSY CIG EFMO DGND RESET VGIN SBUS SCK CPOUT CP DVCC VG1 VREF RF VCMON EFMIN MON VREF 10 C526 0.1 AMICE CLK PWM L552 22µH C503 2200p C515 0.022 C505 0.1 ADIPWO R563 R561 22 22 15 C501 10p C502 10p TRK+ FCSFCS+ TRK- IX PS EQ AGND OFC C1 OFC C2 VREF10 VC RFO VREF09 AVCC2 PD NI PD I PD O SMON 20 R514 0 IY JY JX AVCC C B A D PEAK BOTM TON C OFTRX NPPO TE L551 47µH TP511 C527 0.1 D A AGND SMON ADIP IN AGND AGND WPP LPF ADFG CDN CCSL2 CLK CPGND CN R562 R564 10 47 LDREF CN501 20P C B A D PEAK BOTTOM See page 25 for Notes. IY JY JX z IX 6-5. SCHEMATIzC DIAGRAM – MAIN SECTION (2/3) – C532 C533 C534 C535 22p 22p 22p 22p FOPWMR FOPWMF Q951 FZT968TA SWITCH C955 10 OPR GND IN2- VI2 AD SEL I SEL VO R956 0.022 CHG AD SEL C958 1 IC952 XC61CN3002NR VB DETECT VBAT CHG AMP SEL CHG VI MON SPPWMR XSLP MTR OP VI Q953 2SC4738F DIFFERENTIAL OUT2 IC951 SC901582EPR2 CHARE CONTROL IN1 C956 0.1 VG R953 47k BAT SEL PWT WDT R961 2.2 NC WK DET I CTL2 CHG CTL PWR WAKE VIN C954 4700p R967 2.2k R554 C557 4.7M 2.2 I CTL1 RF1 CHG PWM R553 47k CN951 2P VCC FOR STAND CHARGER S901 BUILT-IN BATTERY ON OFF AGND DGND TP959 +B +B R964 100 +B +B PWR CTL GND GND GND GND CN954 5P XWK1 C959 0.1 GND C960 0.1 A/D TRPWMR TRPWMF PGND C551 0.1 R959 1 LITHIUM-ION RECHARGEABLE BATTERY LIP-3WMB 1PC,3.7V 340mAh Li-ion C953 0.1 GND VOUT SLD0 SLPWMR SLPWMF 4M R952 47k CHG I LIMIT C957 0.1 SLD3 CHG MON C558 1000p D951 FT1J3 R957 100 CAP C LIM C555 0.22 C556 2200p IC551 CXA8125ER-TBM-E TRACKING/FOCUS COIL DRIVE, SPINDLE/SLED MOTOR DRIVE TRK+ TRK- M901 SPINDLE MOTOR 8 SLDN SLDU SLDV SLDW CLVW CLVV CLVU CLVN 1 C553 0.47 C554 470p R552 10k SEL1 SEL2 S3 S2 S1 CLK VCC VG1 IN2R IN2F SPMAX SPPD SPFG UOUT SPCOM VOUT WOUT SPPWM VS2 OUT2F OUT2R PGND2 SPBR S/S M902 SLED MOTOR SLGND SLVS SLPD SLVCO SLMAX GND VG2 SPVCO SPFIL SPCIN SPVS SPGND FG CLVU CLVN CLVV CLVW SPPWMF CN551 8P C552 0.1 Q952 UN9113J SWITCH VI2DET R551 100k SLFG SUO SLCOM SVO SWO SLPWM VS1 OUT1L OUT1R PGND1 IN1R IN1F R958 10k XRESET FCS+ FCS- SLD1 SLDU SLDN SLDV SLDW SLD2 RF VDD CN953 5P C928 0.1 CN952 5P 23 23 R965 220 R955 1M Q903 HAT1043M-EL SWITCH C951 C929 47 0.1 10V C952 22 10V MZ-E10 See page 25 for Notes. Q304 UN9113J-(TX).SO INVERTER XD MUTE RMC DTCK RMC KEY1 MUTE ON D EN2 D LPWM+ OPR GND FB801 7 FB803 R803 100 R804 100 FB101 0 R307 47k IC301 NJU8713V-TE2 HEADPHONE AMP (D CLASS AMP) R315 47 D CLK D RPWM+ D EN1 R317 1M C201 0.22 L201 100µH C204 0.1 MCK VSS IN1 EN1 VSSO OUT1 VDDO BEEP VDD IN2 EN2 VSSO OUT2 VDDO C302 47 6.3V C311 0.47 C301 0.1 R104 2.2k R318 1M D201 MAZS027008SO Q303 NTHD5904T1 MUTE R204 2.2k R102 4.7k L101 100µH Q102 2SC5585TL MUTE C102 220 2.5V RVDD RDTCK RKEY RGND L-CH A-GND R-CH J301 1 C852 0.1 D851 MAZZ068H01S0 FB802 Q202 2SC5585TL MUTE C309 0.1 C924 1 R904 220k R310 0 C310 220 4V D301 MAZS027008SO C303 0.1 D101 MAZS027008SO C851 0.1 C803 470p R202 4.7k C101 0.22 C104 0.1 C202 220 2.5V FB201 0 R313 1k C908 47 6.3V C902 22 6.3V C901 0.1 C312 10p R802 1M Q904 XP4313-(TX).SO SWITCH VCC AGND VG1 C903 22 6.3V D904 MA116 R914 0 OPEN CLS SW PWR FFCLR z XWK1 RMC KEY1 6-6. SCHEMATIzC DIAGRAM – MAIN SECTION (3/3) – VSTB R302 22k R303 10k R304 2.2k IC302 LMV301MGX/NOPB REG IN+ VCC GND IN- OUT R301 10k C304 0.047 R306 100 C307 1 R311 1k C909 4.7 16V C306 0.47 R312 22k R917 220k R915 D903 MA116 0 C925 0.1 C921 1 R905 1k C904 470p Q302 UMT1N R309 10 C907 0.01 D902 MA729-TX L902 220µH Q301,302 BOOSTER R906 1M C905 0.01 C906 1000p XRESET C911 0.01 C912 0.01 C910 0.1 R919 1M C915 470p C913 0.047 R909 1k R901 470k Q901 XP152A12COMR SWITCH R903 10k D VO PWM C305 4.7 10V Q301 UMX1N L901 150µH R908 10k R902 220k R916 470k TAP901 RF1 INM1 DTC1 CRST1 XRST1 C1L VG LG PGND3 VB XRST2 CRST2 DTC2 INM2 RF2 VC2G VC1G PGND1 L1 L1 VO1 VCO1 VC1 VSTB HVB LVB VRMC XWK1 XWK2 XWK3 XWK4 FFCLR R305 10k C308 22 4V SLEEP CLK SEQSEL WDT SCK STRB DATA HPI2 HPI1 MUTEON GND VHP1 HP1 PGND HP2 VHP2 IC901 SC901580EPR2 DC-DC CONVERTER PWR SLEEP 176K SIO4 CLK PWR STRB SIO4 DO C923 1 MUTE ON PGND2 L2 L2 VO2 VCO2 VCIN REGO3 REGI3 REGO2 VC2 REGC1 REGI1 REGC1 REGC2 REGC3 VREF DGND Q902 MMBF0202PLT1 SWITCH BUS L903 150µH R918 220k UNREG R912 10k L904 10µH RF VDD C926 22 6.3V R921 0 VDD C916 1 C917 22 6.3V C922 22 4V R911 100k C920 0.1 R951 0 (CHASSIS) 24 24 MZ-E10 r WAVEFORMS Note on Printed Wiring Boards • X : parts extracted from the component side. z : Through hole. • • : Pattern from the side which enables seeing. (The other layers' patterns are not indicated.) Caution: Pattern face side: Parts on the pattern face side seen from the (Side B) pattern face are indicated. Parts face side: Parts on the parts face side seen from the (Side A) parts face are indicated. • Main boards is six-layer pritnted board. However, the patterns of layer 2 to 5 have not been included in this diagrams. • Replacement of IC501 and IC601 used in this set requires a special tool. • Lead Layouts 1 1.3 Vp-p 16.9344 MHz IC601 (R606) 107 XOUT 2 surface 3.6 Vp-p 11.3 µsec IC901 qdqf L1 Lead layout of conventional IC CSP (chip size package) 3 3.6 Vp-p 11.3 µsec IC901 efeg L2 Note on Schematic Diagram • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums. • All resistors are in Ω and 1/4 W or less unless otherwise specified. Note: The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Note: Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié. : B+ Line. • • Power voltage is dc 3.7V and fed with regulated dc power supply from connector (CN952). • Voltages and waveforms are dc with respect to ground under nosignal conditions. no mark : PLAY • Voltages are taken with a VOM (Input impedance 10 MΩ). Voltage variations may be noted due to normal production tolerances. • Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. • Circled numbers refer to waveforms. • Signal path. F : Analog J : Digital * Replacement of IC501 and IC601 used in this set requires a special tool. • The voltage and waveform of CSP (chip size package) cannot be measured, because its lead layout is different form that of conventional IC. 25 MZ-E10 6-7. IC PIN FUNCTION DESCRINTION • IC601 LC-896442-VH4-16-E (DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO SIGNAL PROCESSOR, EFM/ACIRC ENCODER/DECODER, SHOCK PROOF MEMORY CONTROLLER, 16M BIT D-RAM, SYSTEM CONTROL) (MAIN BOARD) Pin No. 26 Pin Name I/O Description 1 MWEB – Not used (open) 2 XD_MUTE O Mute signal output to Headphone 3 SIO4 DO O Serial data output to DC-DC convertor (SC901580EPR2) 4 (SIO4 DI) I Not used (Connected to ground) 5 SIO2 CLK O Serial clock output to EEPROM 6 NV XCS O Chip select signal output to EEPROM 7 SIO2 DO O Serial data output to EEPROM 8 SIO2 DI I Serial data input from EEPROM 9 AVSS – Ground 10 UNREG MON I UNREG voltage monitor input 11 RF VCMON I Reference voltage (VC) input from RF AMP (SN761058ZQL) 12 RMC KEY1 I Remoto control key signal input 13 CHG_VI_MON I AC adapter voltage input 14 RF_TMP_MON I signal monitor input 15 OPEN CLS SW I Cassette lid open/close signal input 16 SET KEY I Key signal input 17 CHG MON I Battery charge ∆V detect and charge current monitor input 18 AVDD – Power supply 19 RMC DTCK I/O 20 (RMC SPCK) – Not used (open) Serial clock output to RF AMP (SN761058ZQL) Serial data input/output 21 SBUS CLK O 22 SBUS DATA I/O 23 PWR_CLK_PWM O Clock output to DC-DC converter (SC901580EPR2) 24 AMICE CLK PWM O PWM signal output to RF AMP (SN761058ZQL) 25 DSP INTB – Not used (open) 26 DSP WRQB – Not used (open) 27 DRV FG INT – Not used (open) 28 DRV SLEDI INT – Not used (open) 29 XCHG I LIMIT O Limit charge current control signal 30 OPR_LED_O_CTL O LED (orange) control signal output 31 (LOCAL CHK1) – Not used (open) 32 CHG AD SEL O Monitor control of charge A/D signal 33 VCC2 – Power supply 34 VSS – Ground 35 PWR FFCLR O Latch and clear signal output to DC/DC converter (SC91580EPR2) 36 PWR SLEEP O Sleep signal output to DC/DC converter (SC91580EPR2) 37 PWR STRB O Strobe signal output to DC/DC converter (SC91580EPR2) 38 CHG AMP SEL O Select signal output of charge control 39 CHG PWM O Charge control PWM signal output 40 D_VO_PWM O Power supply control PWM signal output of Headphone AMP (NJU8713V-TE2) 41 OPR LED G PWM O LED (green) control signal output 42 OPR LED R PWM O LED (red) control signal output 43 VDD – Power supply 44 VSS – Ground 45 D_EN1 O Drive control signal output to Headphone AMP (NJU-8713V-TE2) 46 PD S1 O PD-IC mode select signal output to optical pick-up 47 XRF_RESET O Reset signal output to RF AMP (SN761058ZQL) 48 (LOCAL CHK2) – Not used (open) 49 SMON4 – Not used (open) Serial data input/output to RF AMP (SN761058ZQL) MZ-E10 Pin No. Pin Name I/O 50 XSLP MTR OP 51 XDISC DET I Not used (connected to ground) 52 D_EN2 O Drive control signal output to Headphone AMP (NJU-8713V-TE2) SMON 0 to 3 – Not used (open) F16M O Clock (16.9344MHz) output to Headphone AMP (NJU-8713V-TE2) 53 to 56 57 58 to 61 O Description Start/stop signal output to motor drive (CXA8125ER-TBM-E) MD 7 to 4 – Not used (open) VCC2 – Power supply 63 MD3 – Not used (open) 64 MECNT0 I Not used (open) 65 MECNT1 – Not used (open) 66 FG I Spindle FG signal input from motor drive (CXA8125ER-TBM-E) 62 67 MD2 – Not used (open) 68 4M O Clock output to motor drive (CXA8125ER-TBM-E) 69 MD1 – Not used (open) 70 MD0 – Not used (open) 71 TRPWMF O Tracking PWM signal output to motor drive (CXA8125ER-TBM-E) 72 TRPWMR O Tracking PWM signal output to motor drive (CXA8125ER-TBM-E) 73 FOPWMF O Focus PWM signal output to motor drive (CXA8125ER-TBM-E) 74 FOPWMR O Focus PWM signal output to motor drive (CXA8125ER-TBM-E) 75 SPPWMF O Spindle PWM signal output to motor drive (CXA8125ER-TBM-E) 76 SPPWMR O Spindle PWM signal output to motor drive (CXA8125ER-TBM-E) 77 VSS – Ground 78 VCC2 – Power supply 79 VDD – Power supply 80 SLPWMF O Sled PWM signal output to motor drive (CXA8125ER-TBM-E) 81 SLPWMR O Sled PWM signal output to motor drive (CXA8125ER-TBM-E) 82 SLD0 O Sled stepping control signal output to motor drive (CXA8125ER-TBM-E) 83 SLD1 I Sled FG signal input from motor drive (CXA8125ER-TBM-E) 84 SLD2 O Sled control signal output to motor drive (CXA8125ER-TBM-E) 85 SLD3 O Stepping /DC change signal output to motor drive (CXA8125ER-TBM-E) 86 (LOCAL CHK3) – Not used (open) 87 VSS – Ground 88 HOLD SW I HOLD switch signal input 89 MD15 – Not used 90 MD14 – Not used 91 XADJUST I Test mode set input 92 XPATCH I Not used (connected to ground) 93 MD13 – Not used (open) 94 TYPE3 I Not used (connected to ground) 95 MD12 – Not used (open) 96 TYPE2 I Not used (connected to ground) 97 VSS – Ground MD11 to 8 – Not used (open) 102 TYPE1 I Not used (connected to ground) 103 TYPE0 I Not used (open) 104 LDREF O Laser control signal output to RF AMP (SN761058ZQL) 105 VSS – Ground 106 XIN I System clock input (16.9344MHz) 107 XOUT O System clock output (16.9344MHz) 108 VDD – Power supply 109 DPVSS – Ground 98 to 101 27 MZ-E10 Pin No. Description I/O 110 D LPWM+ O L-CH audio signal output 111 D PWM– O Not used (open) 112 D RPWM+ O R-CH audio signal output 113 D RPWM– O Not used (open) 114 D CPWM O Not used (open) 115 DPVDD – Power supply 116 VVDD – Power supply 117 VPDO O Not used 118 VVSS – Ground 119 AVSS1 – Ground 120 AVDD1 – Power supply 121 AUX I Not used 122 VC I VC monitor input to RF AMP (SN761058ZQL) 123 FE I FE signal input to RF AMP (SN761058ZQL) 124 TE I TE signal input to RF AMP (SN761058ZQL) 125 ABCD I ABCD signal input to RF AMP (SN761068) 126 BOTTOM I RF/ABCD bottom hold signal to RF AMP (SN761058ZQL) 127 PEAK I RF/ABCD peak hold signal to RF AMP (SN761058ZQL) 128 AVDD – Power supply 129 VC VSS – Ground 130 ISET I Bias resistor connect terminal of charge pump 131 FR I Bias resistor connect terminal of oscillator 132 VC VDD – Power supply 133 PDO O Charge pump (VCEC) output 134 JITTERC O Capacitor connect terminal of jitter measurement 135 HFL I Track detect signal input from RF AMP (SN761058ZQL) 136 EFMIN I EFM signal input from RF AMP (SN761058ZQL) 137 SLCISET O Bias resistor connect terminal of slice level amplifier 138 SLCO O Slice level of EFM signal output 139 ADIPWO I ADIP signal input from RF AMP (SN761058ZQL) 140 VCC2 – Power supply 141 VSS – Ground 142 to 149 I/O Not used FWEB – Not used 151 FOEB – Not used 152 FCEB – Not used 150 153 to 158 28 Pin Name DATA0 to 7 ADR 0 to 5 – Not used 159 MCASB – Not used 160 MOEB – Not used 161 MAD9 – Not used 162 MAD8 – Not used 163 ADR6 – Not used 164 ADR7 – Not used 165 MAD7 – Not used 166 MDR8 – Not used 167 MAD6 – Not used 168 ADR9 – Not used 169 ADR10 – Not used 170 VDD – Power supply 171 MAD5 – Not used 172 VSS – Ground MZ-E10 Pin No. Pin Name I/O Description 173 VCC2 – Power supply 174 MAD4 – Not used 175 to 180 ADR11 to 16 – Not used VSS – Ground 182 ADR17 – Not used 183 PCK – Not used (open) 184 DEFECT – Not used (open) 185 DECLK – Not used (open) 186 VCC2 – Ground 187 DEDATA – Not used (open) 181 188 to 191 TEST0 to 3 I Not used (open) 192 XRESET I System reset signal input 193 VDD – Power supply 194 VSS – Ground 195 MAD3 – Not used 196 SIO4 CLK O System clock output to DC/DC converter (SC901580EPR2) 197 MAD2 – Not used (open) 198 MAD1 – Not used (open) 199 MAD0 – Not used (open) 200 MRASB – Not used (open) 29 MZ-E10 6-8. IC BLOCK DIAGRAMS VI IN1 WDT PWT CHG_CTL GND IC951 SC901582EPR2 24 23 22 21 20 19 SW6 OSC VI NSW4 VREF TIME DIVIDER CAP_C_LIM 1 18 RF1 VI2DET 2 N1 19 GND NSW3 SW5 A/D 3 NSW1 I_SEL 4 LOGIC SIGNAL RECEIVER 17 I_CTL1 LOGIC SIGNAL RECEIVER 16 I_CTL2 N2 AD_SEL 5 15 WK_DET VO VI2 SW4 VREF N3 VI2 6 14 PWR_WAKE DELAY VI VREF VCR BATT SEL VOLTAGE REFERENCE VG 11 12 VG IN2- VO 10 BAT_SEL 9 OUT2 8 VBAT 7 SEQSEL WDT SCK STRB DATA HPI2 HPI1 MUTEON GND VHP1 HP1 PGND4 HP2 VHP2 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 (VCC) CLK 64 (VCC) SLEEP IC901 SC901580EPR2 (HP AMP) VC AMP1 CONTROL FFCLR1 1 BANDGAP REFERENCE AM2 XWK4 2 48 VREF XWK3 3 REF2 REF3 XWK2 4 REF DAC 47 REGC3 REF1 46 REGC2 45 REGC1 REF4 REF5 XWK1 5 VC2 REF1 FFCLR LVB 7 43 REGO1 VG LVB DRIVER HVB 8 44 REGI1 SERIES PASS REGULATOR1 REF3 REF2 VC2 VRMC 6 VG VC2 42 VC2 SERIES PASS REGULATOR2 REF4 41 REGO2 VG VSTB 9 40 REGI3 XRST1 VC VF1 XRST1 VC1 10 SERIES PASS REGULATOR3 VF2 REF5 POWER AWITCH 1 VCO1 11 38 CVIN XRST1 POWER AWITCH 2 XRST2 VO1 12 L1 13 L1 14 SEQSEL XRST1 37 VCO2 XRST2 XRST2 36 VO2 XRST1 PWM VC START-UP VC VB SET-UP PRE DRIVER SET-UP PRE DRIVER XRST1 PWM PGND11 15 REF2 34 L2 33 PGND2 VG VMODE VG VB VC VG 35 L2 REF2 SET-UP DC/DC CONVERTOR VC1G 16 VB VG VF2 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 RF1 INM1 DTC1 CRST1 XRST1 CIL VG LG PGND3 VB XRST2 CRST2 DTC2 INM2 RF2 VC2G VF2 30 39 REGO3 XRST2 MZ-E10 OUTPUT CONTROL IC301 NJU8713V-TE2 NCK 1 VSS 2 14 BEEP 13 VDD IN1 3 12 IN2 EN1 4 11 EN2 VSS 0 5 10 VSS 0 OUT 1 6 9 OUT 2 VDD 0 7 VDD VDD 8 VDD 0 BPZ OUTPUT S/S SP BR PGND2 OUT2R OUTF2 VS2 SPPWM WOUT VOUT SPCOM UOUT SPFG IC551 CXA8125ER-TBM-E 48 47 46 45 44 43 42 41 40 39 38 37 LOGIC PRE DRIVE DRIVER 35 SPVS 34 SPCIN PHASE COMP. 33 SPIL WAVE MIX REG. VG SINK PRI DRIVER VG 32 SPVCO PHASE COMP. 1/N CLK 7 WAVE MIX S3 10 SEL LOGIC S2 9 DRIVER LOGIC S1 8 31 VG2 30 GND SENSORLESS LOGIC SLED PRE DRIVE VCC 6 SLED PRE DRIVE 1/N IN2F 3 VG1 5 SEL SPMAX 2 IN2R 4 36 SPGND VCO SPPD 1 29 SLMAX 28 SLVCO 27 SLPD SEL2 11 26 SLVS SEL1 12 25 SLGND PRE DRIVE 13 14 15 16 17 18 19 20 21 22 23 24 IN1F IN1R PGND1 OUT1R OUT1F VS1 SLPWM SWO SVO SLCOM SUO SLFG LOGIC 31 MZ-E10 IY JY JX AVCC C B A D PEAK BOTM TON-C OFTRK PPON TE IC501 SN761058ZQL 56 55 54 53 52 35 50 49 48 47 46 45 44 43 AVCC PEAK/ BOTM OFTRK T-ON IX 1 42 FE ABCD PS 2 41 ABCD EFM COMP. EQ 3 FE A GND 4 OFC-C1 5 39 ASSY 38 CIG RF TPP/WPP TE OFC-C2 6 37 EFMO VREF10 7 36 DGND VC 8 35 RESET VREF09 10 33 SBUS APC PD-I 13 14-O 14 32 SCK 31 CPOUT A+B+C+D I+J NPP TON CSL AW+DW TONE PEAK TON BOTM ADIP TE TWP-P PK/BTM AW CSLO VREF A-C D-C OFTTH PD-NI ADIP-BPF PD-NI 12 AVCC2 TEMP AVCC2 SERIAL I/F 34 VGIN AVCC RFO 9 AVCC2 11 POWER SUPPLY 30 CP 29 DVCC SIGNAL MONITOR 15 16 17 18 19 20 21 22 23 24 25 26 27 28 D-C A-C AGND SMPN ADIP-IN AGND AGND WPP-LPF ADFG CON CCSL2 CLK CPGND NC ADIP 32 40 RFI MZ-E10 SECTION 7 EXPLODED VIEWS NOTE : • -XX, -X mean standardized parts, so they may have some difference from the original one. • Color indication of Appearance Parts Example : KNOB, BALANCE (WHITE) ••• (RED) ↑ ↑ Parts color Cabinet's color • Items marked “ * ”are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. 7-1. MAIN SECTION • The mechanical parts with no reference number in the exploded views are not supplied. • Hardware (# mark) list and accessories are given in the last of this parts list. • Abbreviation CND : Canadian HK : Hong Kong JEW : Tourist KR : Korean The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié. 16 5 13 17 18 15 33 19 12 14 5 20 5 21 30 11 10 29 32 31 22 5 28 9 5 27 23 8 7 5 3 2 4 6 25 24 5 Ref. No. Part No. Description 1 2 * 3 4 5 3-248-142-01 3-246-315-01 A-3178-965-A 1-686-493-11 3-234-449-07 PLATE, RETAINER SHEET (CONTROL) CONTROL BOARD, COMPLETE PWB, SWITCH FLEXIBLE SCREW (M1.4) Remark 6 7 8 9 10 3-246-314-01 3-246-313-01 3-246-312-01 X-3382-635-1 3-246-203-01 KNOB (OPEN) COVER (CONTROL) BUTTON (CONTROL) BRACKET ASSY SCREW, STEP 11 12 13 14 15 X-3382-636-1 3-246-318-01 X-3382-787-1 3-246-319-01 1-756-318-21 HOLDER ASSY BRACKET (STOP) PANEL ASSY (S), UPPER BRACKET (R) BATTERY, LITHIUM ION STORAGE (US, CND) 15 1-756-318-31 BATTERY, LITHIUM ION STORAGE (AEP, UK, HK, JEW, KR) 3-246-322-01 CASE, BATTERY 16 26 1 Ref. No. 17 * 18 19 * 20 Part No. Description Remark 3-246-323-01 RETAINER, BATTERY A-3178-966-A POWER BOARD, COMPLETE 1-686-494-11 PWB, POWER RELAY FLEXIBLE 21 22 23 24 A-3178-957-A 3-246-305-01 3-250-833-01 3-246-306-01 3-250-169-01 MAIN BOARD ASSY SHEET (INSULATING) SHEET (BLIND) ESCUTCHEON LID (DC), BATTERY CASE 25 26 26 27 28 3-246-325-01 3-246-304-21 3-246-304-31 3-246-310-01 3-246-308-01 KNOB (POWER) PANEL (LOWER) (JEW,KR) PANEL (LOWER) (AEP,UK,HK,US,CND) COVER (L) KNOB (HOLD) 29 30 31 32 33 3-249-753-01 3-246-307-01 3-246-309-01 3-246-311-01 3-250-176-01 SHEET (LED) BUTTON (GROUP) WINDOW (LED) STRAP HOLE SHEET (POWER PC BOARD) 33 MZ-E10 7-2. MECHANISM DECK SECTION (MT-MZE10-184) 53 54 55 56 57 M902 59 not supplied 52 51 52 not supplied 61 58 60 M901 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. 51 Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié. Ref. No. Part No. Description 51 52 53 * 54 55 3-225-278-02 3-225-996-17 X-3382-398-1 3-244-870-01 3-244-882-01 SCREW, TAPPING SCREW (M1.4)(EG),PRECISION PAN BASE ASSY, MOTOR CHASSIS GEAR (SA) 56 57 34 3-338-645-31 WASHER (0.8-2.5) 3-244-880-01 SPRING, THRUST DETENT Remark Ref. No. Part No. 0 58 59 60 X-3383-261-1 OPTICAL PICK-UP ASSY (ABX-1ES) 3-244-883-01 GEAR (SB) A-3174-607-A SCREW BLOCK ASSY, LEAD 61 M901 M902 Description 3-244-879-01 SPRING, RACK 8-835-782-01 MOTOR, DC SSM18D (SPINDLE) 8-835-783-01 MOTOR, DC SSM21B (SLED) Remark MZ-E10 SECTION 8 ELECTRICAL PARTS LIST NOTE : • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX, -X mean standardized parts, so they may have some difference from the original one. • RESISTORS All resistors are in ohms METAL : Metal-film resistor METAL OXIDE :Metal oxide-film resistor F : nonflammable • Items marked “ * ”are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. Ref. No. Part No. * A-3178-957-A MAIN BOARD ASSY • SEMICONDUCTORS In each case, u : µ , for example : uA.... : µ A.... , uPA.... : µ PA.... uPB.... : µ PB.... , uPC.... : µ PC.... uPD.... : µ PD.... • CAPACITORS uF : µ F • COILS uH : µ H The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié. • Abbreviation CND : Canadian HK : Hong Kong JEW : Tourist KR : Korean Description Remark ************** MAIN When indicating parts by reference number, please include the board. Ref. No. Part No. Description Remark C527 C532 C533 1-125-777-11 CERAMIC CHIP 1-164-858-11 CERAMIC CHIP 1-164-858-11 CERAMIC CHIP 0.1uF 22PF 22PF 10% 5% 5% 10V 50V 50V C534 C535 C536 C551 C552 1-164-858-11 1-164-858-11 1-119-923-81 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 22PF 22PF 0.047uF 0.1uF 0.1uF 5% 5% 10% 50V 50V 10V 16V 16V C553 C554 C555 C556 C557 1-125-891-11 1-164-935-11 1-127-715-91 1-164-939-11 1-125-838-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.47uF 470PF 0.22uF 0.0022uF 2.2uF 10% 10% 10% 10% 10% 10V 50V 16V 50V 6.3V C558 C601 C603 C604 C605 1-164-937-11 1-107-820-11 1-107-820-11 1-125-777-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.001uF 0.1uF 0.1uF 0.1uF 0.1uF 10% 50V 16V 16V 10V 16V C606 C607 C608 C609 C610 1-125-777-11 1-107-820-11 1-119-923-81 1-107-820-11 1-107-820-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.047uF 0.1uF 0.1uF 10% C611 C612 C613 C614 C616 1-164-937-11 1-107-820-11 1-119-923-81 1-125-777-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.001uF 0.1uF 0.047uF 0.1uF 0.1uF C617 C618 C619 C620 C621 1-107-820-11 1-164-935-11 1-125-777-11 1-164-941-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 470PF 0.1uF 0.0047uF 0.1uF C622 C626 C628 C801 C803 1-119-923-81 1-107-819-11 1-119-923-81 1-107-820-11 1-164-935-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.047uF 0.022uF 0.047uF 0.1uF 470PF 10% 10% 10% C804 C805 C851 C852 C901 1-164-935-11 1-164-943-11 1-107-820-11 1-107-820-11 1-125-777-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 470PF 0.01uF 0.1uF 0.1uF 0.1uF 10% 10% 1-686-494-11 POWER RELAY FLEXIBLE BOARD < CAPACITOR > C101 C102 C104 C201 C202 1-127-715-91 1-135-868-91 1-107-820-11 1-127-715-91 1-135-868-91 CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP 0.22uF 220uF 0.1uF 0.22uF 220uF 10% 20% C204 C301 C302 C303 C304 1-107-820-11 1-107-820-11 1-137-858-11 1-107-820-11 1-119-923-81 CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 47uF 0.1uF 0.047uF 10% 16V 16V 6.3V 16V 10V C305 C306 C307 C308 C309 1-137-701-11 1-125-891-11 1-125-837-91 1-127-895-91 1-107-826-11 TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP 4.7uF 0.47uF 1uF 22uF 0.1uF 20% 10% 10% 20% 10% 10V 10V 6.3V 4V 16V C310 C311 C312 C501 C502 1-137-859-11 1-125-891-11 1-164-850-11 1-164-850-11 1-164-850-11 TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 220uF 0.47uF 10PF 10PF 10PF 20% 10% 0.50PF 0.50PF 0.50PF 4V 10V 50V 50V 50V C503 C505 C506 C507 C508 1-164-939-11 1-125-777-11 1-164-941-11 1-125-777-11 1-164-939-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022uF 0.1uF 0.0047uF 0.1uF 0.0022uF 10% 10% 10% 10% 10% 50V 10V 16V 10V 50V C509 C510 C511 C512 C513 1-125-777-11 1-117-919-11 1-137-762-91 1-164-941-11 1-164-941-11 CERAMIC CHIP TANTAL. CHIP TANTALUM CERAMIC CHIP CERAMIC CHIP 0.1uF 10uF 10uF 0.0047uF 0.0047uF 10% 20% 20% 10% 10% 10V 6.3V 4V 16V 16V C515 C518 C519 C520 C523 1-107-819-11 1-119-923-81 1-125-837-91 1-125-837-91 1-164-943-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.022uF 0.047uF 1uF 1uF 0.01uF 10% 10% 10% 10% 10% 16V 10V 6.3V 6.3V 16V C525 C526 1-164-943-11 CERAMIC CHIP 1-125-777-11 CERAMIC CHIP 0.01uF 0.1uF 10% 10% 16V 10V 10% 20% 20% 16V 2.5V 16V 16V 2.5V 10% 10% 10% 10V 16V 10V 16V 16V 10% 10% 10% 50V 16V 10V 10V 10V 10% 10% 10% 10% 16V 50V 10V 16V 10V 10% 10% 10V 16V 10V 16V 50V 50V 16V 16V 16V 10V 35 MZ-E10 MAIN Ref. No. Part No. Description C902 C903 C904 C905 C906 1-135-837-91 1-135-837-91 1-164-935-11 1-164-943-11 1-164-937-11 TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 22uF 22uF 470PF 0.01uF 0.001uF 20% 20% 10% 10% 10% Remark 6.3V 6.3V 50V 16V 50V C907 C908 C909 C910 C911 1-164-943-11 1-137-858-11 1-100-396-91 1-125-777-11 1-164-943-11 CERAMIC CHIP TANTAL. CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 47uF 4.7uF 0.1uF 0.01uF 10% 20% 20% 10% 10% 16V 6.3V 16V 10V 16V C912 C913 C915 C916 C917 1-164-943-11 1-119-923-81 1-164-935-11 1-100-352-91 1-135-837-91 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CHIP CERAMIC TANTAL. CHIP 0.01uF 0.047uF 470PF 1uF 22uF 10% 10% 10% 16V 10V 50V 16V 6.3V C920 C921 C922 C923 C924 1-125-777-11 1-100-352-91 1-165-799-11 1-125-837-91 1-127-573-11 CERAMIC CHIP CHIP CERAMIC TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 1uF 22uF 1uF 1uF 10% C925 C926 C928 C929 C951 1-125-777-11 1-135-837-91 1-107-820-11 1-107-820-11 1-137-934-91 CERAMIC CHIP TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP TANTAL. CHIP 0.1uF 22uF 0.1uF 0.1uF 47uF 20% 10V 6.3V 16V 16V 10V C952 C953 C954 C955 C956 1-165-897-11 1-107-820-11 1-164-941-11 1-127-692-11 1-107-820-11 TANTAL. CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 22uF 20% 0.1uF 0.0047uF 10% 10uF 10% 0.1uF 10V 16V 16V 16V 16V C957 C958 C959 C960 1-125-777-11 1-100-352-91 1-125-777-11 1-125-777-11 CERAMIC CHIP CHIP CERAMIC CERAMIC CHIP CERAMIC CHIP 0.1uF 1uF 0.1uF 0.1uF 10V 16V 10V 10V 20% Ref. No. FB803 20% 10% 10% 10% 20% 10% 10% 10% < CONNECTOR > CN801 CN951 CN952 1-816-846-21 CONNECTOR, FPC (ZIF) 1-816-868-21 CONNECTOR (POWER JACK) 1-816-922-21 CONNECTOR, FPC (ZIF) < DIODE > D101 D201 D301 D801 D802 8-719-056-58 8-719-056-58 8-719-056-58 6-500-444-01 6-500-445-01 DIODE DIODE DIODE DIODE DIODE MAZS027008SO MAZS027008SO MAZS027008SO TLRE1008A(T04) (GROUP) TLOE1008A(T04) (GROUP) D803 D851 D902 D903 D904 6-500-446-01 8-719-077-43 8-719-420-51 8-719-071-45 8-719-071-45 DIODE DIODE DIODE DIODE DIODE TLGE1008A(T04) (GROUP) MAZZ068H01S0 MA729 MA116-(TX).SO MA116-(TX).SO D951 6-500-369-01 DIODE FT1J3TP 36 1-216-864-11 1-216-864-11 1-414-227-11 1-414-228-11 1-414-228-11 METAL CHIP METAL CHIP FERRITE FERRITE FERRITE 0 0 0uH 0uH 0uH 5% 5% Remark 0uH IC301 IC302 @ IC501 IC551 @ IC601 6-703-631-01 6-703-652-01 6-702-869-01 8-835-792-01 6-802-226-01 IC IC IC IC IC NJU8713V-TE2 LMV301MGX/NOPB SN761058ZQL CXA8125ER-TBM-E LC896442-VH4-16-E IC801 IC901 IC951 IC952 8-759-680-85 6-702-865-01 6-702-867-01 8-759-824-57 IC IC IC IC AK6417AL-L SC901580EPR2 SC901582EPR2 XC61CN3002NR < JACK > 1-816-845-21 JACK 7P (i) < COIL > L101 L201 L501 L551 L552 1-412-032-11 1-412-032-11 1-469-570-21 1-469-846-11 1-400-353-21 INDUCTOR CHIP INDUCTOR CHIP INDUCTOR INDUCTOR INDUCTOR 100uH 100uH 10uH 47uH 22uH L901 L902 L903 L904 1-424-929-21 1-412-033-11 1-424-929-21 1-414-398-11 INDUCTOR INDUCTOR CHIP INDUCTOR INDUCTOR 150uH 220uH 150uH 10uH < TRANSISTOR > Q102 Q202 Q301 Q302 Q303 8-729-050-32 8-729-050-32 6-550-376-01 8-729-055-85 6-550-527-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC5585TL 2SC5585TL UMX1N-TN UMT1N-TN NTHD5904T1 Q304 Q501 Q802 Q901 Q902 8-729-037-61 8-729-922-10 8-729-427-49 6-550-561-01 6-550-561-01 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR UN9113J-(TX).SO 2SA1577-QR XP4214-TXE MMBF0202PLT1 MMBF0202PLT1 Q903 Q904 Q951 Q952 Q953 8-729-048-92 8-729-048-77 6-550-326-01 8-729-037-61 8-729-042-27 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR HAT1043M-EL XP4313-(TX).SO FZT968TA UN9113J-(TX).SO 2SD2216J-QR(TX).SO < RESISTOR > < FERRITE BEAD > FB101 FB201 FB601 FB801 FB802 Description 1-469-082-21 FERRITE < IC > J301 10V 16V 4V 6.3V 16V Part No. 1/10W 1/10W R102 R104 R202 R204 R301 1-218-961-11 1-218-957-11 1-218-961-11 1-218-957-11 1-218-965-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 4.7K 2.2K 4.7K 2.2K 10K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R302 R303 R304 R305 R306 1-218-969-11 1-218-965-11 1-218-957-11 1-218-965-11 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 22K 10K 2.2K 10K 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R307 R309 1-218-973-11 RES-CHIP 1-208-635-11 RES-CHIP 47K 10 5% 0.5% 1/16W 1/16W @ Replacement of IC501 and IC601 used in this set requires a special tool. MZ-E10 MAIN Ref. No. Part No. Description Remark R310 R311 R312 1-218-990-11 SHORT CHIP 1-218-953-11 RES-CHIP 1-218-969-11 RES-CHIP 0 1K 22K 5% 5% 1/16W 1/16W R313 R315 R317 R318 R501 1-218-953-11 1-218-937-11 1-218-989-11 1-218-989-11 1-208-707-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP METAL CHIP 1K 47 1M 1M 10K 5% 5% 5% 5% 0.5% 1/16W 1/16W 1/16W 1/16W 1/16W R502 R504 R505 R506 R507 1-208-683-11 1-242-967-81 1-218-977-11 1-218-990-11 1-218-990-11 METAL CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP 1K 1 100K 0 0 0.5% 5% 5% 1/16W 1/16W 1/16W R509 R510 R511 R513 R514 1-218-990-11 1-218-965-11 1-218-965-11 1-218-990-11 1-218-990-11 SHORT CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP 0 10K 10K 0 0 5% 5% 1/16W 1/16W R516 R518 R551 R552 R553 1-208-691-11 1-218-990-11 1-218-977-11 1-218-965-11 1-218-973-11 METAL CHIP SHORT CHIP RES-CHIP RES-CHIP RES-CHIP 2.2K 0 100K 10K 47K 0.5% 1/16W 5% 5% 5% 1/16W 1/16W 1/16W R554 R561 R562 R563 R564 1-243-975-81 1-216-801-11 1-216-797-11 1-216-801-11 1-216-805-11 METAL CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 4.7M 22 10 22 47 5% 5% 5% 5% 5% 1/16W 1/10W 1/10W 1/10W 1/10W R601 R602 R603 R605 R606 1-208-943-11 1-218-973-11 1-218-957-11 1-218-989-11 1-218-990-11 METAL CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 220K 47K 2.2K 1M 0 0.5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W R607 R608 R609 R610 R611 1-208-691-11 1-218-961-11 1-218-965-11 1-218-961-11 1-218-957-11 METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 2.2K 4.7K 10K 4.7K 2.2K 0.5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R613 R614 R615 R617 R618 1-218-949-11 1-218-961-11 1-218-965-11 1-208-943-11 1-218-985-11 RES-CHIP RES-CHIP RES-CHIP METAL CHIP METAL CHIP 470 4.7K 10K 220K 470K 5% 5% 5% 0.5% 0.5% 1/16W 1/16W 1/16W 1/16W 1/16W R620 R621 R622 R623 R627 1-218-965-11 1-218-977-11 1-218-965-11 1-218-965-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 10K 100K 10K 10K 0 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W R628 R801 R802 R803 R804 1-218-969-11 1-218-989-11 1-218-989-11 1-218-941-81 1-218-941-81 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 22K 1M 1M 100 100 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W R817 R818 R819 R901 R902 1-218-945-11 1-244-161-81 1-218-949-11 1-218-985-11 1-218-981-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 220 2.2 470 470K 220K 5% 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W 1/16W Ref. No. POWER CONTROL Part No. Description R903 R904 R905 R906 R908 1-208-707-11 1-218-981-11 1-218-953-11 1-218-989-11 1-218-965-11 METAL CHIP RES-CHIP RES-CHIP RES-CHIP RES-CHIP 10K 220K 1K 1M 10K 0.5% 5% 5% 5% 5% Remark 1/16W 1/16W 1/16W 1/16W 1/16W R909 R911 R912 R914 R915 1-218-953-11 1-218-977-11 1-218-965-11 1-218-990-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP SHORT CHIP SHORT CHIP 1K 100K 10K 0 0 5% 5% 5% 1/16W 1/16W 1/16W R916 R917 R918 R919 R921 1-218-985-11 1-218-981-11 1-218-981-11 1-218-989-11 1-218-990-11 RES-CHIP RES-CHIP RES-CHIP RES-CHIP SHORT CHIP 470K 220K 220K 1M 0 5% 5% 5% 5% 1/16W 1/16W 1/16W 1/16W R951 R952 R953 R955 R956 1-218-990-11 1-218-973-11 1-218-973-11 1-218-989-11 1-245-454-21 SHORT CHIP 0 RES-CHIP 47K RES-CHIP 47K RES-CHIP 1M METAL FILM (SMD) 5% 1/16W 5% 1/16W 5% 1/16W 0.022(1608) R957 R958 R959 R961 R964 1-218-941-81 1-218-965-11 1-245-456-21 1-245-457-21 1-218-941-11 RES-CHIP 100 RES-CHIP 10K METAL FILM (SMD) METAL FILM (SMD) METAL CHIP 100 5% 1/16W 5% 1/16W 1.0(1608) 2.2(1608) 0.5% 1/16W R965 R967 1-218-945-11 METAL CHIP 1-218-957-11 RES-CHIP 220 2.2K 0.5% 5% 1/16W 1/16W < SWITCH > S802 S803 S804 1-786-424-21 SWITCH, TACTILE (GROUP) 1-786-443-21 SWITCH, DETECTION (OPEN/CLOSE) 1-786-425-21 SWITCH, SLIDE (HOLD N ) < VIBRATOR > X601 1-795-561-21 VIBRATOR, CERAMIC (16.9344MHz) ***************************************************** * A-3178-966-A POWER BOARD, COMPLETE ********************* < CONNECTOR > CN953 CN954 1-816-937-21 CONNECTOR, FPC (ZIF) 1-816-922-21 CONNECTOR, FPC (ZIF) < SWITCH > S901 1-786-425-21 SWITCH, SLIDE (BUILT-IN BATTERY) ****************************************************** * A-3178-965-A CONTROL BOARD, COMPLETE ********************** < CONNECTOR > CN802 1-816-846-21 CONNECTOR, FPC (ZIF) < RESISTOR > R811 R812 R813 1-218-957-11 RES-CHIP 1-218-957-11 RES-CHIP 1-218-961-11 RES-CHIP 2.2K 2.2K 4.7K 5% 5% 5% 1/16W 1/16W 1/16W 37 MZ-E10 CONTROL Ref. No. Part No. Description Remark R814 R815 1-218-961-11 RES-CHIP 1-218-965-11 RES-CHIP 4.7K 10K 5% 5% 1/16W 1/16W R816 1-218-965-11 RES-CHIP 10K 5% 1/16W < SWITCH > S801 1-786-401-21 SWITCH, TACTILE (., > N, x, VOL–, VOL+) ****************************************************** MISCELLANEOUS ************* 4 16 20 0 58 M901 M902 1-686-493-11 1-756-318-11 1-686-494-11 X-3383-261-1 8-835-782-01 PWB, SWITCH FLEXIBLE BATTERY, LITHIUM ION STORAGE PWB, POWER RELAY FLEXIBLE OPTICAL PICK-UP ASSY (ABX-1ES) MOTOR, DC SSM18D (SPINDLE) 8-835-783-01 MOTOR, DC SSM21B (SLED) ****************************************************** ACCESSORIES ************ 0 0 0 0 1-477-536-11 1-477-537-11 1-477-538-11 1-477-539-11 1-477-585-11 ADAPTOR, AC (JEW,KR) ADAPTOR, AC (UK,HK) ADAPTOR, AC (AEP) ADAPTOR, AC (US,CND) REMOTE CONTROL UNIT (RM-MC33ELU) 0 1-569-007-11 1-756-303-11 1-816-921-11 3-220-749-01 3-247-809-01 ADAPTOR, CONVERSION 2P (JEW,KR) STAND, CHARGE ADAPTOR, HEADPHONE PC-WM10 CASE, CARRYING MANUAL, INSTRUCTION (JAPANESE)(JEW,KR) 3-247-809-11 MANUAL, INSTRUCTION (ENGLISH) 3-247-809-21 MANUAL, INSTRUCTION (FRENCH) (AEP,JEW,KR) 3-247-809-41 MANUAL, INSTRUCTION (SPANISH) (AEP,JEW,KR) 3-247-809-51 MANUAL, INSTRUCTION (DUTCH) (AEP) 3-247-809-61 MANUAL, INSTRUCTION (SWEDISH) (AEP) 3-247-809-71 3-247-809-81 3-247-809-91 3-247-810-11 MANUAL, INSTRUCTION (ITALIAN) (AEP) MANUAL, INSTRUCTION (PORTUGUESE)(AEP) MANUAL, INSTRUCTION (FINNISH) (AEP) MANUAL, INSTRUCTION (TRADITIONAL CHINESE) (UK,HK,JEW,KR) 3-247-810-21 MANUAL, INSTRUCTION (KOREAN) (JEW,KR) 8-953-218-91 RECEIVER MDR-E838SP 3-252-648-01 CLIP (REMOTE CONTROL) The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une piéce portant le numéro spécifié. 38 MZ-E10 MEMO 39 MZ-E10 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date 1.0 2002.11 Description of Revision New
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2002:10:28 00:18:15Z Modify Date : 2002:10:30 16:38:25+09:00 Subject : US, Cabadian, AEP, UK, E, Tourist Page Count : 40 Creation Date : 2002:10:28 00:18:15Z Mod Date : 2002:10:30 16:38:25+09:00 Producer : Acrobat Distiller 5.00 for Macintosh Author : Sony Corporation Keywords : Metadata Date : 2002:10:30 16:38:25+09:00 Creator : Sony Corporation Title : MZ-E10 Description : US, Cabadian, AEP, UK, E, Tourist Page Mode : UseThumbs Page Layout : SinglePageEXIF Metadata provided by EXIF.tools