Sony Hcd Sd1 Users Manual
hcdsd1_11 hcdsd1_11
hcd-sd1 to the manual 8686a19f-b442-4175-8ba9-f38f0808b876
2015-01-23
: Sony Sony-Sony-Hcd-Sd1-Users-Manual-288011 sony-sony-hcd-sd1-users-manual-288011 sony pdf
Open the PDF directly: View PDF .
Page Count: 50
Download | |
Open PDF In Browser | View PDF |
HCD-SD1 SERVICE MANUAL AEP Model UK Model E Model HCD-SD1 is the amplifier, CD and tuner section in CMT-SD1. Model Name Using Similar Mechanism CD SECTION HCD-MD313 Mechanism Type CDM13B-5BD19 Base Unit Type BU-5BD19 Optical Pick-up Type KSS-213B/K-N SPECIFICATIONS — Continued on next page — COMPACT DISC RECEIVER MICROFILM –1– Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. This caution label is located inside the unit. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Notes on chip component replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing • Keep the temperature of soldering iron around 270˚C during repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. MODEL IDENTIFICATION – Specification Label – MODEL NO. HCD-SD1 SAFETY-RELATED COMPONENT WARNING !! Parts No. COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. MODEL AEP, UK model SP, HK model PARTS No. 4-212-711-0π 4-212-712-0π • Abbreviation HK : Hong Kong model SP : Singapore model –2– TABLE OF CONTENTS NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT 1. SERVICING NOTE .......................................................... 4 2. GENERAL .......................................................................... 7 3. DISASSEMBLY 3-1. 3-2. 3-3. 3-4. 3-5. 3-6. 3-7. 3-8. Loading Panel ....................................................................... 8 Glass ASSY ........................................................................... 8 Front Panel ........................................................................... 9 Main Board and Tuner Unit .................................................. 9 CD Mechanism Deck .......................................................... 10 Back Panel ......................................................................... 10 Disc Table .......................................................................... 11 Optical Pick-up ................................................................... 11 4. SERVICE MODE ............................................................. 12 5. TEST MODE ..................................................................... 13 6. ELECTRICAL ADJUSTMENTS ............................... 14 7. DIAGRAMS 7-1. Circuit Boards Location ...................................................... 16 7-2. Block Diagrams • BD Section ....................................................................... 17 • Main Section .................................................................... 19 7-3. Schematic Diagram – BD Section – ................................... 23 7-4. Printed Wiring Board – BD Section – ................................. 25 7-5. Schematic Diagram – Main (1/2) Section – ........................ 27 7-6. Schematic Diagram – Main (2/2) Section – ........................ 29 7-7. Printed Wiring Board – Main Section – .............................. 31 7-8. Schematic Diagram – Sub Trans Section – ......................... 33 7-9. Printed Wiring Board – Sub Trans Section – ...................... 34 7-10. Schematic Diagram – Panel Section – ............................. 35 7-11. Printed Wiring Board – Panel Section – ........................... 37 7-12. Schematic Diagram – AMP Section – .............................. 39 7-13. Printed Wiring Board – AMP Section – ........................... 41 7-14. Schematic Diagram – Connector Section – ...................... 43 7-15. Printed Wiring Board – Connector Section – ................... 45 7-16. Schematic Diagram – REG Section – .............................. 47 7-17. Printed Wiring Board – REG Section – ............................ 49 7-18. IC Block Diagrams ........................................................... 51 7-19. IC Pin Functions ............................................................... 54 The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens. LASER DIODE AND FOCUS SEARCH OPERATION CHECK Carry out the “S curve check” in “CD section adjustment” and check that the S curve waveform is output two times. 8. EXPLODED VIEWS 8-1. 8-2. 8-3. 8-4. Front Panel Section ............................................................. 56 Chassis Section ................................................................... 57 Mechanism Deck Section (CDM13B-5BD19) ................... 58 Base Unit Section (BU-5BD19) .......................................... 59 9. ELECTRICAL PARTS LIST ........................................ 60 –3– SECTION 1 SERVICING NOTE OPENING THE DISC TRAY WHEN POWER IS OFF 2 Open the glass door, and pull out the loading panel. 1 Using a thin screwdriver, rotate the internal cam in the arrow direction completely. ATTACHING THE GLASS ASSEMBLY • Attach according to steps 1 to 4. 2 Pull up the glass door, in the arrow direction. 1 1 4 Screw (PTP 2.6x6) 3 Bracket (shaft) (Bottom side) –4– When securing this part, position at the center to allow some play. Open and close the glass window several times, and check that the parts do not touch each other. POSITIONS FOR SERVICING THE CONNECTOR BOARD, SUB-TRANS BOARD, CHEMI-CON BOARD, AND AMP BOARD 1 Remove the four screws securing the upper cover, and remove the upper cover. 2 Remove the loading panel. (Refer to SECTION 3 DISASSEMBLY.) 3 Remove the four screws A securing the MAIN board, five screws B securing the rear panel, two flat cables (CN701, CN702), and open the MAIN board as shown in the figure. 4 Remove the two screws C securing the heat sink, and remove the AMP board and CHEMI-CON board. 5 Remove the two screws D securing the SUB-TRANS board and four screws E securing the CONNECTOR board, and remove the SUB-TRANS board and CONNECTOR board. 6 Return the MAIN board to its original position. 7 Insulate these boards and the MAIN board with paper, etc., and assemble the CONNECTOR board, SUB-TRANS board, CHEMI-CON board, and AMP board on these boards. D C AMP board Heat sink CHEMI-CON board SUB-TRANS board CONNECTOR board B B E MAIN board Flat type wire (CN701) A A Flat type wire (CN702) Should be insulatable with paper, etc. –5– POSITION FOR SERVICING THE CD MECHANISM DECK 1 Remove the four screws securing the upper cover, and remove the upper cover. 2 Remove the loading panel. (Refer to SECTION 3 DISASSEMBLY.) 3 Remove the four screws A securing the MAIN board, five screws B of the rear panel, and flat cables (CN701, CN702), and remove the MAIN board. 4 Remove the two screws D securing the SUB-TRANS board, and remove the SUB-TRANS board. 5 Remove the two screws F securing the REG board. 6 Remove the three screws G securing the CDM cover, and remove the CDM cover. 7 Remove the two screws H securing the CDM, move the CDM backwards by about 5 mm horizontally, and then lift upwards. 8 Rotate the CDM in the counterclockwise direction by about 30˚ to remove. 9 Return the MAIN and SUB-TRANS boards to their original positions. D SUB-TRANS board B B F MAIN board G CDM cover Flat type wire (CN701) A A Flat type wire (CN702) H –6– SECTION 2 GENERAL Front Panel 2 1 3 15 14 4 13 12 11 10 9 8 7 6 5 Location of Parts and Controls 1 2 3 4 5 1/u (Power) button CD disc tray § button VOLUME dial ±/)/TUNING + button 6 7 8 9 10 ≠/0/TUNING – button π button fl button TUNER/BAND button FUNCTION button 11 12 13 14 15 DISPLAY button PHONES jack t indicator u indicator Display window This section is extracted from instruction manual. –7– SECTION 3 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. 3-1. LOADING PANEL 1 Turn ON the power, and press the EJECT button to open the tray. 2 Remove the loading panel in the arrow direction. 3 Press the EJECT button to close the tray. • If the power cannot be turned ON, refer to “Opening the Disc Tray When the Power is OFF” of “Service Note”, and open the tray. Loading panel Power button Eject button 3-2. GLASS ASSY 4 3 4 1 Screw (PTP2.6x6) 2 Bracket (shaft) (Bottom side) –8– 3-3. FRONT PANEL 4 Flat type wire (11core) (CN702) 6 Front panel 3 2 Three claws 5 Flat type wire (13core) (CN701) 1 Three screws (BVTP3x8) 3-4. MAIN BOARD AND TUNER UNIT 1 Four screws (BVTP3x8) 7 MAIN board and Tuner unit 6 Flat type wire (19core) (CN705) 8 Connector (CN706) 5 Connector (CN351) 4 Flat type wire (19core) (CN301) 3 –9– 2 Six screws (BVTP3x8) 3-5. CD MECHANISM DECK 6 Three screws (BVTP3x8) 7 Dust cover 9 CD mechanism deck 8 Two screws (BVTP3x8) 3 Connector (CN942) 5 REG board 1 Two screws (BVTP3x8) 2 Connector (CN945) 4 Connector (CN994) 3-6. BACK PANEL 2 Four screws (BVTT3X8) 7 Back panel 5 Connector (CN901) 1 Six screws (BVTP3X8) 3 Connector (CN992) 6 Connector (CN551) 8 PC board block 4 Connector (CN991) – 10 – 3-7. DISC TABLE 3 Holder (MG) assembly 1 Screw (BV3x8) 2 Screw (BV3x8) 4 Pull out the disc table. 3-8. OPTICAL PICK-UP 4 Remove the optical pickup in the arrow direction C. C 3 Flat type wire (16 core) (CNU101) 1 Move the claw in the arrow A direction. B A 2 Remove the sled shaft in the arrow direction B. – 11 – BD board SECTION 4 SERVICE MODE Key Check Mode for Complete Lighting of LED/Fluorescent Display Tube • Perform this mode to analyze and check malfunctions such as display defects and when buttons do not work. Procedure: 1. Press the 1/u button to turn on the power. 2. Press the DISPLAY button and ^ button together. 3. All LEDs and the fluorescent display tube will light up completely. 4. Pressing the FUNCTION button here will light the fluorescent display tube in the following order; Partial lighting 1 n Partial lighting 2 n Complete lighting n Partial lighting 1······ Turning the VOLUME dial will switch the lighting order of the LED. To end without shifting to the key check mode, press the 1/u button to end. 5. Pressing the p button sets the key check mode. 6. During the key check mode, “KEY=0 JOG=0” will be displayed on the fluorescent display tube. Pressing a button will increase the value of “KEY=”. However the value will not increase for buttons which have already been pressed once. Rotating the VOLUME knob in the clockwise direction increases the value of “JOG=” in the order of 1, 2, 3.... and rotating in the counterclockwise direction decreases in order of 10, 9, and 8. 7. To end the check mode, press all buttons (8 buttons). “KEY-OK” will be displayed. Then press any button, and disconnect the power cord from the outlet. Checking the Sub-Clock • Perform this mode to check clock operations. Procedure: 1. Connect an oscilloscope and frequency counter between the pin (TP791) and ground of IC701 of the MAIN board. 2. Press the § and 1/u buttons together to display “91P = 32.768k” on the fluorescent display tube. 3. Check that the signal on the oscilloscope becomes a 32 kHz rectangular waveform and the reading of the frequency counter becomes 32.768 kHz. 4. Press the 1/u button to end. Sled Servo Mode • In this mode, the CD sled motor can be operated freely. Execute it when cleaning the pick-up. Round holes can be seen on the topmost board when the case is opened. Move the pick-up and clean off the dirt in these round holes using a cotton swab. Procedure: 1. Press the DISPLAY and § buttons with the power of the unit OFF. 2. When the sled servo is set, “MANUAL” is displayed on the fluorescent display tube. 3. Pressing the +/TUNING/) button when the CD is in the stop state moves the pick-up to the outer track. Pressing the =/ TUNING/0 button moves it to the inner track. 4. To end this mode, perform the following steps. 1) Move the If not, the disc cannot be removed. 2) Press the DISPLAY and § buttons together. Note: • When ending this mode, be sure to move the pick-up to the innermost circumference. If not, the disc cannot be removed. • Do not move the sled motor more than required as this will damage the gears. Round holes for cleaning Initializing (Forced Reset) • Perform this mode when resetting the unit or when returning the unit to the customer. • The preset frequency of the tuner, etc. will be the settings at shipment. Procedure: While pressing the 1/u button, insert the power cord into the outlet. – 12 – SECTION 5 TEST MODE AGING MODE This unit is equipped with an aging mode. Use this mode for analyzing defects and for checks after completing repairs. After repairs, perform aging 100 times and check that the unit is normal. The aging mode is executed in the following sequence. The aging mode will continue as long as the unit is normal. If the unit becomes abnormal, it will display the state and number of cycles, and operations will stop. (Refer to Table 1.) Sequence of Aging Mode: Start Sets the CD function and reads the CD TOC. CD TOC OK? NO Message 1 YES Pauses first song. NO OK? Message 2 YES Last song search paused state NO OK? Message 3 YES Starts last song playback OK? NO Message 4 YES End playback? NO YES Is CD playing? OK NG Message 4 Opens the CD tray OK? NO Message 5 YES Closes the CD tray OK? NO Message 6 YES Power OFF Display of number of aging cycles Power ON Procedure: 1. Press the DISPLAY button and =/TUNING/0 button together. 2. To end aging, press the u button and end. Table-1 Messages and Main Reasons for Stop of Aging No 1 Error Messages CD No Disc NG Details of Error Cannot read CD TOC. 2 CD Pause NG 3 CD Search NG Cannot set CD pause in CD synchro mode. Cannot search last track on CD. 4 CD Play NG Cannot play last track on CD. 5 6 CD Open NG CD Close NG Cannot open CD tray. Cannot close CD tray. – 13 – Main Causes Optical defect, spindle defect (including motor), cannot read Q data, disc defect (scratches, etc.), bad focus, bad GFS, etc. Disc defect (scratches, etc.), cannot read Q data, etc. Optical defect, sled, tracking defect (including motor), cannot read Q data, disc defect (scratches, etc.). Optical defect, cannot read Q data, disc defect (scratches, etc.), etc. LOAD OUT SW defect LOAD IN SW defect SECTION 6 ELECTRICAL ADJUSTMENTS S Curve Check CD SECTION Note: 1. CD Block is basically designed to operate without adjustment. Therefore, check each item in order given. 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. 3. Use an oscilloscope with more than 10MΩ impedance. 4. Clean the object lens by an applicator with lens cleaning liquid when the signal level is low than specified value with the following checks. 5. Adjust the focus bias adjustment when optical block is replaced. Focus Bias Adjustment Perform this adjustment when the optical pick-up has been replaced or repaired. oscilloscope BD (CD) board TP (RF) TP (VC) oscilloscope BD (CD) board + – TP (FEO) TP (VC) Procedure : 1. Connect oscilloscope to test point TP (FEO). 2. Connect between test point TP (FOK) and Ground by lead wire. 3. Turn Power switch on. 4. Put disc (YEDS-18) in and turned Power switch on again and actuate the focus search. (actuate the focus search when disc table is moving in and out.) 5. Check the oscilloscope waveform (S-curve) is symmetrical between A and B. And confirm peak to peak level within 2.4 ± 0.7 Vp-p. + – S-curve waveform symmetry Procedure: 1. Connect oscilloscope to test point TP (RF). 2. Turned Power switch on. 3. Put disc (YEDS-18) in and playback. 4. Adjust RV101 so that the waveform is clear. (Clear RF signal waveform means that the shape “◊” can be clearly distinguished at the center of the waveform.) 5. After adjustment, check the RF signal level. • RF signal VOLT/DIV: 200 mV TIME/DIV: 500 nS A within 2.4 ± 0.7 Vp-p B 6. After check, remove the lead wire connected in step 2. Note: • Try to measure several times to make sure than the ratio of A : B or B : A is more than 10 : 7. • Take sweep time as long as possible and light up the brightness to obtain best waveform. RF Level Check oscilloscope level : 1.3 ± 0.3 Vp-p BD (CD) board TP (RF) TP (VC) + – Procedure : 1. Connect oscilloscope to test point TP (RF) on BD board. 2. Turned Power switch on. 3. Put disc (YEDS-18) in and playback. 4. Confirm that oscilloscope waveform is clear and check RF signal level is correct or not. Note: Clear RF signal waveform means that the shape “◊” can be clearly distinguished at the center of the waveform. • RF signal VOLT/DIV: 200 mV TIME/DIV: 500 nS level : 1.3 ± 0.3 Vp-p – 14 – E-F Balance (1 Track Jump) Check (Without remote commander) Adjustment Location: [BD (CD) BOARD] — Component Side — oscilloscope RF BD (CD) board + – RV101 IC101 TEI RV103 Procedure : 1. Connect oscilloscpe to test point TP (TEO) on BD board. 2. Turn Power switch on. 3. Put disc (YEDS-18) in to play the number five track. 4. Press the “P (Pause)” button. (Becomes the 1 track jump mode) 5. Confirm that the oscilloscope waveform is symmetrical on the top and bottom in relation to 0Vdc, and check this level. TEO VC FEO IC102 TP (TEO) TP (VC) FOK (Focus Bias Adjust) FEI RV102 1 track jump waveform IC104 PCK A 0V GND B LEVEL : 300 ± 100 mVp-p Specified level: • A–B x 100 = less than ± 7% 2 (A + B) • A + B = 300 ± 100 mVp-p Focus/Tracking Gain Adjustment (RV102, RV103) This gain has a margin, so even if it is slightly off. There is no problem. Therfore, do not perform this adjustment. Please note that it should be fixed to mechanical center position when you moved and do not know original position. – 15 – SECTION 7 DIAGRAMS 7-1. CIRCUIT BOARDS LOCATION TRANS board MAIN board PANEL-SW board SUB-TRANS board BD board LOADING board AMP board REG board CHEMI-CON board PANEL board HP board CONNECTOR board VOLUME board – 16 – HCD-SD1 7-2. BLOCK DIAGRAMS – BD SECTION – OPTICAL PICK-UP (KSS-213B) 34 RV102 FOCUS GAIN RV101 FOCUS BIAS 2 FEI 1 FEO 42 TEO FE-O FE-M TA-M TAO 44 TEI RV103 TRACKING GAIN PD +5V FE BIAS 37 56 57 59 3 1 64 63 51 52 53 43 46 47 49 50 39 26 28 27 6 7 12 13 D OUT LASER DIODE CLK DATA XRST SCOR SENS SQCK SQSO DF LAT XLAT FOCUS SW FOK 25 34 PHD FOCUS SW Q103 FGD 4 XRST 22 7 FOCUS COIL TRACKING COIL XRST T+ 18 17 T– 2-AXIS DEVICE F– F+ TRACKING COIL DRIVE MOTOR DRIVER IC351 19 TRACKING/FOCUS COIL DRIVE IC102 (1/2) 12 11 FOCUS COIL DRIVE 9 M904 (CD) LOADING MOTOR M102 SLED MOTOR M M101 SPINDLE MOTOR M 2 DRIVE 5 LOAD-OUT 10 DRIVE 6 LOAD-IN M SLED SERVO IC101 (2/2) SLED/SPINDLE MOTOR DRIVE IC102 (2/2) 26 • 27 SLED MOTOR DRIVE 25 1 • 2 SPINDLE MOTOR DRIVE 4 16 SLO SL+ 14 OUT-SW S291 (LOAD OUT) IN-SW S292 (LOAD IN) 09 • SIGNAL PATH : CD : Digital out – 17 – A MAIN SECTION (Page 19) DATA 21 XLT 20 CLK 19 33 LD MAIN SECTION (Page 19) S101 (LIMIT) LD LD DRIVE Q101, 102 A CD LOUT ROUT 13 DATA MLAT CLOK B F DIGITAL SIGNAL PROCESSOR IC103 55 CNIN 54 SEIN C.OUT 23 SENS 24 DIGITAL FILTER D/A CONVERTER IC104 LOUT 16 D OUT C 38 F 39 E 2 DATA 1 LRCK 3 BCLK PCMD 21 LRCK 20 BCLK 22 XRST C 14 RF RFO 31 RFI 30 SCOR SQSO SQCK SENS B D 35 PD1 36 PD2 DATA XLAT CLOK D SPOD A 5•6 DATAO XLTO CLKO MDP FOK XLON 1 4 2 5 10 6 CKO E A 4 XTI • XTO TRACKING/FOCUS SERVO, RF AMP IC101 (1/2) B+ K XTAI DETECTOR X101 22.5792 MHz – 18 – A MAIN SECTION (Page 19) HCD-SD1 – MAIN SECTION – ANTENNA SOUND PROCESSOR IC101(1/2) TUNER UNIT TUNER L-OUT AM R-OUT STEREO BS/CS R-CH MD ST CD TUN TUNED MUT MUTING DO DO CL CL DI DI CE CE FM-DET-OUT FM 75Ω 5 15 BASS/ TREBLE AMP • VOLUME 6 7 R-CH DEFB SW Q121 8 16 18 27 DBFB 25 AMP 10 R-CH + R-CH – 8 – R-CH +8dB AMP IC103 35 R-CH 3 1 5 7 MUTE Q505 J101(2/2) L MUTE Q111 R-CH L R + RELAY SW Q502,503 RELAY DRIVE Q504 FAN-DRIVE Q551–553 R-CH FAN RELAY SW Q501 R-CH J667 L R-CH SWITCH IC102 J102 (1/2) L BS 12 14 CS/BS IN SIRCS IC602 L 2 IN R-CH R-CH R TC-MUT 99 MUTE SW Q183 MD-MUT 98 MUTE SW Q182 13 R-CH R MUTE Q112 MASTER CONTROL IC701 15 DAT CLK LAT R-CH 1 ST 9 10 11 TUN DO DI CL CE MUT SWITCH Q103 90 65 66 67 SIRCS SDATA SCLOCK 82 83 84 85 86 87 88 STEREO TUNED ST.IDATA ST.ODATA ST.CLOCK ST.LATCH ST.MUTE SLAT1 100 V/T RDS DECODER IC451 4 IN 38 37 36 35 INT 16 DATA 2 FL.RST FL.LAT FL.SLK FL.DAT 14 20 RDS.CLK X601 4.3 MHz 21 RDS.DAT 13 FLUORESCENT INDICATOR TUBE FL601 CD LOUT MUTE2 69 A 5 – 50 CS RST DAT CLK 56 VFL G12 BUFFER Q601 51 63 62 61 60 DISPLAY DRIVER IC601 CD SECTION (Page 18) SCOR SQSO SQCK FOCUS SW SENS CLK DAT DF-LAT XLAT XRST IN SW OUT SW LOAD IN LOAD OUT 22 43 45 52 53 57 58 59 60 63 49 50 61 62 D OUT – 19 – SCOR SQSI SQCK FSW SENS CD-CLK CD-DATA DF-LAT DSP-LAT BD.RESET IN SW OUT SW LOAD IN LOAD OUT TAPE OUT PHONES CN781 DAT HLP CLK MUTE SW Q181 SP RELAY SW 76 1 2 5 DOUT HPSW 31 ON/XSRBY 81 FLDISP SW 75 SWITCH Q792 I 2 C.DAT 55 SWITCH Q791 I2 C.CLOCK 56 6 SY LY 7 3 SX LX 2 I 2 C BUS EXTENDER IC791 S621-625,631-634 KEY2 26 T991 MAIN TRANSFORMAER HLP SWITCH Q793 HELP 51 KEY BOARD SWITCH DAT CLK ±B A±7.5VREG Q941, 946 A±7.5VREG D±5V 3 D+5VREG 1 IC921 M+7V 3 AC IN RECT D971 RY901 STANDBY RELAY RECT D941-944 AC OUTLET CN904 RECTIFIER D921,922 KEY1 25 ENCODERB 19 ENCODERA 18 XT1 14 X2 11 X1 10 2 1 VOLUME S691 X701 5MHz t TIMER:RED D605 M+7VREG 1 IC922 CDD+5V SW Q942 CDD+5V X702 32KHz TIMER LED 73 ON LED 72 STBY LED 70 ST12V u ON:GREEN STANDBY:RED D606 ST 12V OUT Q951,952 STBY+5.6V RECTIFIER Q951,953 3 VG LIGHT 64 AC CUT D601-604 SWITCH Q752 D601 )/± D602 D603 D604 fl 0/≠ π VG SWITCH Q966 8 RESET 15 PANEL SW 2 BD POWER 1 SYSTEM CONTROL IC311 SWITCH Q753 MUTE1 68 XT2 13 VF1 VF0 R R-CH SPEAKER INPEDANCE 6-16Ω D881 MD R OUT R-CH R-CH J102(2/2) R –VG TMB11 3 R-CH IN TAPE 9 MUTE Q141 + – R-CH L MD SPEAKER RELAY RY501 28 LAT 20 LATCH DAT 21 DATA CLK 22 CLOCK BUFFER Q450 POWER AMP IC801 4 39 38 37 36 R-CH J101 (1/2) SOUND PROCESSOR IC101(2/2) RESET Q751 3 RESET IC951 D752 D751 TO IC701 VDD PANEL SW S699 SWITCH Q943 VG SW Q964 1 RECT D901-904 UG REG Q961 RECT D961-964 VF1 VF0 STBY+5.6V 1 STBY+5.6V REG IC901 T991 SUB TRANSFORMER VF SW Q962,963 • R ch is same as L ch • SIGNAL PATH : FM BS :BS/CS : PB : REC : CD : Digital out : TAPE VF SWITCH Q965 + C759 BACK UP – 20 – DIGITAL OPTICAL HCD-SD1 WAVEFORMS – BD SECTION – THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) – MAIN SECTION – 1 1 1.3 ± 0.3 Vp-p 4.3 Vp-p For schematic diagrams. Note: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums. • All resistors are in Ω and 1/4 W or less unless otherwise specified. ¢ • : internal component. • 2 : nonflammable resistor. • 1 : fusible resistor. • C : panel designation. 5 MHz IC101 #¡ (RFO) (PLAY Mode) 500 mV/DIV, 500 ns/DIV IC701 !¡ (XI) 2 2 Approx. 100 mVp-p 2.6 Vp-p 32 kHz IC101 $¢ (TEI) (PLAY Mode) 50 mV/DIV, 1 µs/DIV Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. IC701 !¢ (XI) 3 Approx. 150 mVp-p S : B+ Line. T : B– Line. H : adjustment for repair. Voltages and waveforms are dc with respect to ground in service mode. • Voltages are taken with a VOM (Input impedance 10 MΩ). Voltage variations may be noted due to normal production tolerances. • Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production tolerances. • Circled numbers refer to waveforms. • • • • IC101 2 (FEI) (PLAY Mode) 50 mV/DIV, 1 µs/DIV 4 2.6 Vp-p 7.6 µs IC103 3 (MDP) (PLAY Mode) 5 5.1 Vp-p Signal path. F : FM E : PB (MD) m : PB (TAPE) n : REC J : CD c : digital out • Abbreviation SP : Singapore model. HK : Hong Kong model. 136 µs IC103 @• (RFCK) 6 5.3 Vp-p 14 ns IC103 @∞ (XPCK) 7 For printed wiring boards. Note: • X : parts extracted from the component side • p : parts mounted on the conductor side. ® : Through hole. • ¢ • : internal component. • b : Pattern from the side which enables seeing. (The other layers' patterns are not indicated.) Caution: Pattern face side: (Side B) Parts face side: (Side A) 5 Vp-p 474 ns IC103 @™ (BCLK) 8 5.1 Vp-p Parts on the pattern face side seen from the pattern face are indicated. Parts on the parts face side seen from the parts face are indicated. 22.8 µs IC103 @º (LRCK) 9 • Indication of transistor 4.6 Vp-p C Q B E These are omitted 16.9344 MHz BC E IC104 6 (XTO) These are omitted – 21 – – 22 – HCD-SD1 7-3. SCHEMATIC DIAGRAM – BD SECTION – • See page 22 for Waveforms. • See page 51 for IC Block Diagrams. (Page 29) Note on Schematic Diagram: • Voltages and waveforms are dc with respect to ground under no-signal (detuned) conditions. no mark : Stop ( ) : CD (PLAY) * : Can not be measured. – 23 – – 24 – HCD-SD1 7-4. PRINTED WIRING BOARD – BD SECTION – • See page 16 for Circuit Boards Location. (Page 32) OPTICAL PICK-UP BLOCK KSS-213BA/S-N • Semiconductor Location • Semiconductor Location Ref. No. Location Ref. No. Location IC103 C-1 Q101 Q103 B-3 C-3 IC101 IC102 IC104 B-1 B-1 C-3 Q102 B-1 – 25 – – 26 – HCD-SD1 7-5. SCHEMATIC DIAGRAM – MAIN (1/2) SECTION – • See page 22 for Waveforms. • See page 31 for Printed Wiring Board. (Page 39) (Page 29) (Page 29) – 27 – – 28 – HCD-SD1 7-6. SCHEMATIC DIAGRAM – MAIN (2/2) SECTION – • See page 22 for Waveforms. • See page 31 for Printed Wiring Board. • See page 53 for IC Block Diagrams. • See page 54 for IC Pin Functions. (Page 24) (Page 43) (Page 43) (Page 36) (Page 28) (Page 28) (Page 35) (Page 48) (Page 48) – 29 – – 30 – HCD-SD1 7-7. PRINTED WIRING BOARD – MAIN SECTION – • See page 16 for Circuit Boards Location. (Page 41) (Page 45) (Page 26) (Page 46) • Semiconductor Location Ref. No. Location D351 D751 D752 D753 D755 D791 D792 D793 A-6 G-5 G-5 G-6 G-6 B-5 B-5 B-5 IC101 IC102 IC103 IC351 IC701 IC791 IC951 C-3 D-2 A-1 A-5 C-6 B-6 G-6 Q103 Q111 Q112 Q121 Q141 Q181 Q182 Q183 Q211 Q212 Q222 Q241 Q751 Q752 Q753 Q781 Q782 Q783 Q791 Q792 Q793 D-2 B-1 C-1 D-4 C-4 D-4 D-4 D-4 B-1 C-1 B-3 B-4 G-7 B-7 C-6 F-8 F-8 F-8 B-6 B-6 C-6 AEP, UK (Page 37) R OUT L R IN L R OUT L R IN *1 L R IN L *1 AEP, UK SP, HK JW734 JW735 R735 : MOUNT : NO MOUNT X601 AEP, UK (Page 38) (Page 50) – 31 – – 32 – (Page 50) HCD-SD1 7-9. PRINTED WIRING BOARD – SUB SECTION – • See page 16 for Circuit Boards Location. 7-8. SCHEMATIC DIAGRAM – SUB SECTION – (Page 49) (Page 47) DTC114ESA 11EQS04 11EQS04 11EQS04 (Page 43) DTA114ESA-TP 11EQS04 11ES2-NTA2B 11ES2NTA2B DTA114ESA-TP 11ES2NTA2B 11ES2-NTA2B (Page 45) • Semiconductor Location – 33 – Ref. No. Location Ref. No. Location D901 D902 D903 D904 D905 D906 D961 D962 D963 D964 D965 B-2 B-1 B-1 B-1 C-2 B-3 B-2 B-2 B-2 B-2 C-2 D966 C-1 IC901 C-2 Q901 Q961 Q962 Q963 Q964 Q965 Q966 B-3 C-2 B-3 C-3 C-3 C-2 C-2 – 34 – HCD-SD1 7-10. SCHEMATIC DIAGRAM – PANEL SECTION – (Page 30) (Page 30) – 35 – – 36 – HCD-SD1 7-11. PRINTED WIRING BOARD – PANEL SECTION – • See page 16 for Circuit Boards Location. (Page 32) (Page 32) E • Semiconductor Location Ref. No. Location D601 D602 D603 D604 D605 D606 C-3 C-3 C-4 C-5 B-7 B-7 IC601 IC602 B-5 B-2 Q601 C-3 AEP, UK – 37 – – 38 – HCD-SD1 7-12. SCHEMATIC DIAGRAM – AMP SECTION – (Page 47, 48) (Page 43) (Page 28) – 39 – – 40 – HCD-SD1 7-13. PRINTED WIRING BOARD – AMP SECTION – • See page 16 for Circuit Boards Location. • Semiconductor Location (Page 50) (Page 31) (Page 45) – 41 – – 42 – Ref. No. Location D553 D554 D971 D972 A-5 A-5 A-5 A-5 Q505 Q551 Q552 Q553 B-4 A-5 A-5 A-4 HCD-SD1 7-14. SCHEMATIC DIAGRAM – CONNECTOR SECTION – (Page 30) (Page 29) (Page 40) (Page 33) – 43 – – 44 – HCD-SD1 7-15. PRINTED WIRING BOARD – CONNECTOR SECTION – • See page 16 for Circuit Boards Location. (Page 31, 32) • Semiconductor Location Ref. No. Location D501 D556 D557 D881 B-3 B-3 C-3 D-2 IC311 B-5 Q501 Q502 Q503 Q504 B-2 B-2 B-3 B-3 (Page 34) DIGITAL OPTICAL CD AUX SPEAKER INPEDANCE AEP, UK (Page 42) SYSTEM CONTROL LOADING BOARD S292 (LOAD IN) S291 (LOAD OUT) CN291 5 M M904 (LOADING MOTOR) 4 3 (Page 32) 2 1 1-634-461- – 45 – – 46 – 11 (11) HCD-SD1 7-16. SCHEMATIC DIAGRAM – REG SECTION – (Page 40) (Page 29) (Page 29) (Page 33) – 47 – – 48 – HCD-SD1 7-17. PRINTED WIRING BOARD – REG SECTION – • See page 16 for Circuit Boards Location. AC OUTLET MDS-SD1 ONLY UNSWITCHED 200W MAX NOT REPLACEABLE: BUILT IN TRANSFORMER (Page 32) (Page 32) (Page 34) (Page 42) • Semiconductor Location – 49 – – 50 – Ref. No. Location D921 D922 D941 D942 D943 D944 D945 D946 D952 A-4 A-4 A-4 A-4 A-4 A-4 B-2 B-1 B-1 IC921 IC922 B-3 B-3 Q941 Q942 Q943 Q951 Q952 B-2 C-2 C-2 A-1 B-1 HCD-SD1 PHD2 PHD1 PHD LD RF M RF O RF I CP CB CC1 CC2 FOK VCC 36 35 34 33 32 31 30 29 28 27 26 25 15 OP– 16 OP+ 17 OUT3A 18 OUT3B VCC DRIVE BUFFER DRIVE BUFFER 19 IN3A 20 IN3B 21 VCC 22 VCC 23 VC 24 IN4B IC101 CXA1782BQ 25 IN4A 27 OUT4A 28 GND • BD section 26 OUT4B IC102 BA6397FP 7-18. IC BLOCK DIAGRAMS DRIVE BUFFER – + + + THERMAL SHUT DOWN – + LEVELS DRIVER MUTE MIRR RF IV AMP1 IIL 24 SENS TTL 23 C. OUT LEVEL SHIFT + – FOK + + – – – + – REGULATOR + APC – + DFCT – DRIVE BUFFER DRIVE BUFFER DRIVE BUFFER • ADDRESS DECODER FE AMP • OUTPUT DECODER IIL 19 CLK IC103 CXD2507AQ + – XLAT CLOK SEIN CNIN DATO XLTO VDD PS1-4 CLKO TM1-7 SPOA TG1-2 64 63 62 61 60 59 58 57 56 55 54 53 52 18 VCC FZC COMP + E 39 FS1-4 BAL1-3 SPOB TOG1-3 SPOC XLON + – F IV AMP SPOD – + • TRACKING HPF COMP MDS 4 • ISET • PHASE COMPENSATION LPF COMP 17 ISET – TM6 TG1 FILI 8 + – 16 SL 0 TOG3 • FCS PHASE COMPENSATION TZC COMP LPFI 43 FS1 TM7 ATSC FS2 45 EXCK 44 SBSO 43 SCOR 42 VSS 3 41 WFCK ASYMMETRY CORRECTOR 40 EMPH D/A INTERFACE 5 RF 14 BIAS 15 DIGITAL OUT 39 DOUT 38 C4M 6 16K RAM ASYO 17 ASYE 18 ERROR CORRECTOR 3 37 FSTT 36 XTSL 35 XTAO 34 XTAI 33 MNTO • F SET + 47 SQCK EFM DEMODULATOR DIGITAL PLL WDCK 19 TG2 DFCT – – 13 TA O – TDFCT 47 AVSS 11 CLTV 12 48 MUTE DIGITAL CLV 46 SQSO ASYI 16 + TM1 TZC 46 FS4 + TG2 FSET TA M VDD GFS MNT1 TGU MNT3 SRCH – 51 – XROF 12 RFCK 11 CZPO 10 XPCK 9 XUGF 8 GTOP 7 BCLK 6 PCMD 5 FE M FDFCT 4 FE O 3 FLB 2 FGD 1 FEI 20 21 22 23 24 25 26 27 28 29 30 31 32 FEO VC 48 14 SL P TM2 DFCT • WINDOW COMP PCO 9 VSS 10 AVDD 13 TM3 TEI 44 ATSC 45 15 SL M TM4 – SUB CODE PROCESSOR 4 LRCK TOG2 TOG1 + TM5 + CPU INTERFACE 14 51 DATA 50 XRST 49 SENS 5 LOCK 5 TEST 6 FILO 7 VEE 41 TEO 42 SERVO AUTO SEQUENCER FOK 1 MON 2 MDP 3 CLOCK GENERATOR + – BAL3 BAL2 BAL1 TE AMP + – – – + E IV AMP EI 40 – 52 – OP-OUT 14 GND 13 OUT2B 12 OUT2A 11 9 IN2A XRST REG 0 20 XLT IIL – + TR-B • INPUT SHIFT RESISTOR IN1B • IIL DATA RESISTOR TTL IN1A 21 DATA FE BIAS 37 IN2B 10 8 GND 7 6 5 2 OUT1B 3 1 OUT1A + TTL RF IV AMP2 F 38 DRIVE BUFFER 22 XRST 4 – + LEVEL SHIFT – – + – – + LEVEL SHIFT LEVEL SHIFT DRIVE BUFFER IC104 PCM1710U-R LRCIN 1 28 ML/DSD INPUT INTERFACE DIN 2 DIGITAL FILTER 27 MC/DM2 MODE CONTROL BCKIN 3 CLKO 26 MD/DM1 TIMING CONTROL 4 25 MUTE XTI 5 24 MODE XTO 6 23 CKSL NOISE SHAPER DGND 7 22 DGND VDD 8 21 VDD 5-LEVEL DAC RIGHT 5-LEVEL DAC LEFT LOW-PASS FILTER RIGHT LOW-PASS FILTER LEFT VCC2R 9 GND2R 10 20 VCC2L 19 GND2L EXT1R 11 18 EXT1L 3-STAGE AMP LEFT 3-STAGE AMP RIGHT EXT2R 12 17 EXT2L VOUTR 13 16 VOUTL 15 VCC1 GND1 14 – MAIN Section – IC351 LB1641 T.S.D O.C.P MOTOR DRIVE MOTOR DRIVE FWD.IN CLAMP 7 8 9 10 MOTOR DRIVE NOISE FILTER 6 NOISE FILTER MOTOR DRIVE 5 4 VCC 2 3 VCC 1 2 REV.IN 1 GND FWD/REV/STOP CONTROL LOGIC VCC NC NC IC791 P82B715TD.118 8 1 5 SDA 6 BUFFER 7 LDA SCL 3 BUFFER 2 LCL GND 4 – 53 – 7-19. IC PIN FUNCTIONS • IC701 System Control (µPD780018AYGF-015-3BA) (MAIN Board) Pin No. 1 Pin Name BD POWER 2 PANEL SW 3 to 7 8 I/O O I Function CD power control pin, “H”:CD POWER ON Front cover open/close switch, “H”:Open glass door, “L”:Close glass door – I Not used AC.CUT I AC power connection signal, “L”:Power is disconnected 9 VPP – Normally connected to the ground pin 10 X2 O Main system clock output pin (5 MHz) 11 X1 I Main system clock input pin (5 MHz) 12 VDD1 – Positive power supply (+5V) 13 XT2 O Sub system clock output pin (32 kHz) 14 XT1 I Sub system clock output pin (32 kHz) 15 RESET I System reset input pin, “L”:RESET 16, 17 – I Not used 18 ENCODER A I Encoder input pin for jogging 19 ENCODER B I Encoder input pin for jogging 20 RDSCLK I RDS clock input pin (Not used) 21 RDSDAT I RDS data input pin (Not used) 22 SCOR I SCOR input pin 23 VDD0 – Positive power supply of port (+5V) 24 ADREF – Reference voltage of A/D converter (+5V) 25 KEY1 I Key input pin (Analog input) 26 KEY0 I Key input pin (Analog input) – I Not used 27 to 30 31 HP-SW I Headphone detection SW, “L”:No HP, “H”:HP 32 – I Not used 33 AVSS – A/D converter ground potential 34 – I Not used 35 FL.DAT O Serial data output for FL tube control IC (MSM9202-02) 36 FL.CLK O Serial clock output for FL tube control IC (MSM9202-02) 37 FL.LAT O Chip select output for FL tube control IC (MSM9202-02) 38 FL.RST O Reset signal output for FL tube control IC (MSM9202-02) 39 – I Not used 40 VSS1 – Ground potential other than port and analog – I Not used 43 SQSI I CD sub code data input 44 – I Not used 45 SQCK O Clock output for reading CD sub code 41, 42 46 to 48 – I Not used 49 IN-SW I CD tray close completion detection input, “L”:CLOSE 50 OUT-SW I CD tray open completion detection input, “L”:OPEN 51 HELP I Pin requesting power ON from the PC link adapter (optional), Normally “H” 52 FSW O Focus gain switch 53 SENSE I SENSE input pin 54 – 55 IIC DAT I/O System control communication data input/output pin 56 IIC CLOCK I/O System control communication clock input/output pin 57 CD-CLK O Serial clock for CD control 58 CD-DATA O Serial data for CD control 59 DF-LAT O Chip select signal for DA/DF 60 DSP-LAT O DSP IC and SSP IC chip select I Not used – 54 – Pin No. 61 Pin Name LOAD IN I/O O Function Tray loading motor control signal, “L”:Loading 62 LOAD OUT O Tray loading motor control signal, “L”:When OPEN 63 BD.RESET O IC reset signal for CD control, “L”:RESET 64 LIGHT O BLUE LED control port of front panel, “L”:LED ON 65 SDATA O Serial data for SOUND PROCESSOR IC101 (M62428AFP) 66 SCLOCK O Serial clock for SOUND PROCESSOR IC101 (M62428AFP) 67 SLAT1 O Chip select for SOUND PROCESSOR IC101 (M62428AFP) 68 MUTE1 O Audio mute signal, “H”:Power amplifier ICs (IC801, IC851) MUTE 69 MUTE2 O Audio mute signal, “L”:Line mute (Q141, Q241) MUTE 70 STANDBY LED O Signal controlling LED which lights when power is OFF, “L”:LED ON 71 VSS0 – Ground potential of port 72 ON LED O Signal controlling LED which lights when power is ON, “L”:LED ON 73 TIMER LED O Signal controlling LED which lights in timer standby, “H”:LED ON 74 – I Not used 75 FL DISP SW O Power ON/OFF signal for FL display, “H”:FL display ON 76 SP RELAY SW O Speaker relay control signal, “L”:Speaker relay ON – I Not used 81 ON/XSTBY O System power control signal, “H”:Standby relay ON 82 STEREO I Tuner stereo signal, “L”:Stereo 83 TUNED I Tuner selection OK signal, “L”:TUNED 84 ST IDATA I Serial input data for tuner 85 ST ODATA O Serial output data for tuner 86 ST.CLOCK O Serial clock for tuner 87 ST LATCH O Chip select for tuner 88 ST MUTE O Tuner mute output 89 ST POWER O Tuner power signal (Not used) 90 SIRCS I SIRCS code input signal (Remote control signal input) 91 PCL I 32 KHz clock monitor out – I 77 to 80 32.768 kHz signal is output in the test mode (Refer to page 12.) 92, 93 Not used 94 DEST1 I Destination differentiation signal (Fixed at “H”) 95 DEST2 I Destination differentiation signal (Fixed at “L”) 96 – I Not used 97 HP MUTE O HP mute signal output 98 MD-MUTE O MD REC OUT control signal “L”:MD REC OUT MUTE (“L” only for MD function) 99 TC-MUTE O REC OUT control signal of TAPE “L”:TAPE REC OUT MUTE (“L” only for TAPE function) 100 V/T O Function control signal “H”:TAPE, “L”:CS/BS – 55 – SECTION 8 EXPLODED VIEWS NOTE: • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • The mechanical parts with no reference number in the exploded views are not supplied. The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. • Hardware (# mark) list and accessories and packing materials are given in the last of this parts list. • Abbreviation HK : Hong Kong model SP : Singapore model 8-1. FRONT PANEL SECTION 20 14 not supplied 17 19 15 Supplied with J667 14 16 13 12 FL601 18 14 8 19 24 5 not supplied 1 10 11 4 7 2 #2 6 9 not supplied 3 2 3 #1 22 23 14 Ref. No. 21 Part No. Description 1 2 3 4 5 X-4950-580-1 4-212-584-01 4-993-007-01 4-942-636-21 4-212-538-11 GLASS ASSY (CD) BRACKET (SHAFT) SCREW (M2.6X6), +P TAPPING EMBLEM (NO.3.5), SONY PANEL (AL-CD), FRONT 6 7 8 9 10 X-4950-364-1 4-212-542-11 X-4950-995-1 4-212-580-11 X-4950-999-1 KNOB (VOL) ASSY RING (VOL) PANEL ASSY (CD), FRONT SPRING (GLASS) BRACKET (R) ASSY * 11 12 * 13 1-671-610-11 VOLUME BOARD X-4950-998-1 BRACKET (L) ASSY 1-671-617-11 PANEL-SW BOARD Remark Ref. No. 14 15 Part No. Description 4-951-620-01 SCREW (2.6X8), +BVTP 1-769-940-11 WIRE (FLAT TYPE) (11 CORE) 16 * 17 * 18 19 * 20 1-769-972-11 1-671-609-11 A-4419-060-A 3-363-099-51 4-212-561-31 WIRE (FLAT TYPE) (13 CORE) HP BOARD PANEL BOARD, COMPLETE SCREW (CASE 3 TP2) CASE 21 22 23 * 24 FL601 4-212-540-11 4-212-541-11 4-212-545-11 4-212-590-11 1-517-805-11 PANEL (AL-CD), LOADING PANEL (CD), LOADING PLATE (CD), ORNAMENTAL HOLDER (FL) INDICATOR TUBE, FLUORESCENT – 56 – Remark 8-2. CHASSIS SECTION not supplied 55 not supplied #1 #2 #1 66 not supplied T991 65(UK,HK) 64 #2 56 #2 67 51 #1 #1 CN904 not supplied #1 57 #1 #5 58 M551 #2 #4 #2 CDM13B-5BD19 #2 #2 #2 54 #2 #4 53 61 59 not supplied 60 52 62 63 not supplied #1 #2 not supplied #2 #2 63 #2 The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Ref. No. Part No. Description * 51 * 51 * 52 53 54 A-4419-059-A A-4419-070-A A-4419-068-A 1-790-305-11 1-693-408-11 MAIN BOARD, COMPLETE (AEP,UK) MAIN BOARD, COMPLETE (SP,HK) REG BOARD, COMPLETE WIRE (FLAT TYPE) (19 CORE) TUNER * 55 * 56 ! 57 * 58 * 59 1-671-615-11 A-4419-064-A 1-575-651-91 3-703-244-00 4-212-564-11 TRANS BOARD CHEMI-CON BOARD, COMPLETE CORD, POWER BUSHING (2104), CORD PANEL (CD), BACK 60 Remark Ref. No. Part No. Description * 61 * 62 63 * 64 A-4419-065-A 1-671-614-11 X-4950-994-1 1-671-611-11 SUB-TRANS BOARD, COMPLETE CONNECTOR BOARD FOOT ASSY AMP BOARD ! 65 66 67 ! CN904 M551 1-770-019-11 3-531-576-01 3-655-653-01 1-526-794-11 1-698-997-21 ADAPTOR, CONVERSION PLUG 3P (UK,HK) RIVET BAND (TAITON), BINDING OUTLET, AC FAN, D.C. ! T991 1-433-478-11 TRANSFORMER, POWER 1-773-108-11 WIRE (FLAT TYPE) (19 CORE)(100mm) – 57 – Remark 8-3. MECHANISM DECK SECTION (CDM13B-5BD19) #2 not supplied 211 #2 212 #6 207 208 205 #2 #2 209 206 210 #7 #8 214 213 219 204 218 215 203 202 BU-5BD19 215 #6 M904 216 216 201 not supplied 217 Ref. No. Part No. Description * 201 202 203 204 205 1-634-461-11 4-927-654-01 3-659-338-00 4-929-764-01 4-927-620-01 LOADING BOARD WASHER (LIMITER) SPRING, COMPRESSION SHAFT (TABLE GUIDE) GEAR (P) 206 207 208 209 210 4-944-006-11 4-927-628-01 4-927-649-01 4-929-724-01 X-4947-265-1 BEARING GEAR (C) BELT PULLEY (B) ARM ASSY, SWING Remark Ref. No. Part No. Description 211 212 * 213 214 215 4-944-012-01 A-4604-752-A 4-917-583-21 X-4941-462-1 4-933-134-01 TABLE, DISC HOLDER (MG) ASSY BRACKET, YOKE CHASSIS (MD) ASSY SCREW (+PTPWH M2.6X6) 4-958-593-01 4-929-747-01 4-929-727-01 4-929-729-01 A-4660-307-A SPRING (BU), COMPRESSION HOLDER (BU) CAM (A) CAM (B) MOTOR (L) ASSY (LOADING) 216 217 218 219 M904 – 58 – Remark 8-4. BASE UNIT SECTION (BU-5BD19) 255 256 259 257 M101 253 254 M102 254 258 252 251 Ref. No. Part No. Description 251 * 252 253 254 ! 255 4-951-620-01 A-4673-402-B 4-917-565-01 4-951-940-01 8-848-379-31 SCREW (2.6X8), +BVTP BD BOARD, COMPLETE SHAFT, SLED INSULATOR (BU) OPTICAL PICK-UP KSS-213B/S-N 256 Remark The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Ref. No. Part No. Description 257 258 259 M101 4-917-567-01 4-917-564-01 3-713-786-51 X-4917-523-4 GEAR (M) GEAR (P), FLATNESS SCREW +P 2X3 MOTOR ASSY (SPINDLE) M102 X-4917-504-1 MOTOR ASSY (SLED) 1-769-069-11 WIRE (FLAT TYPE) (16 CORE) – 59 – Remark AMP SECTION 9 ELECTRICAL PARTS LIST BD Note: The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. When indicating parts by reference number, please include the board name. Ref. No. Part No. * 1-671-611-11 AMP BOARD ********* • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX, -X mean standardized parts, so they may have some difference from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • RESISTORS All resistors are in ohms METAL: Metal-film resistor METAL OXIDE: Metal Oxide-film resistor F : nonflammable Description Remark Ref. No. Part No. • SEMICONDUCTORS In each case, u: µ , for example: uA...: µ A..., uPA...: µ PA..., uPB...: µ PB..., uPC...: µ PC..., uPD...: µ PD... • CAPACITORS uF : µ F • COILS uH : µ H • Abbreviation HK : Hong Kong model SP : Singapore model Description Remark C103 C105 C106 1-164-346-11 CERAMIC CHIP 1-163-038-91 CERAMIC CHIP 1-164-690-91 CERAMIC CHIP 1uF 0.1uF 0.0022uF 5% 16V 25V 50V C107 C108 C109 C110 C111 1-164-690-91 1-163-021-91 1-163-021-91 1-163-989-11 1-163-038-91 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022uF 0.01uF 0.01uF 0.033uF 0.1uF 5% 10% 10% 10% 50V 50V 50V 25V 25V C112 C113 C114 C115 C116 1-163-038-91 1-164-690-91 1-164-005-11 1-126-607-11 1-163-016-00 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP 0.1uF 0.0022uF 5% 0.47uF 47uF 20% 0.0039uF 10% 25V 50V 25V 4V 50V C117 C118 C119 C120 C121 1-164-005-11 1-107-823-11 1-163-038-91 1-135-201-11 1-163-038-91 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP TANTALUM CHIP CERAMIC CHIP 0.47uF 0.47uF 0.1uF 10uF 0.1uF 25V 16V 25V 4V 25V C122 C123 C124 C125 C126 1-163-021-91 1-163-038-91 1-126-607-11 1-163-021-91 1-163-038-91 CERAMIC CHIP CERAMIC CHIP ELECT CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 0.1uF 47uF 0.01uF 0.1uF C127 C128 C129 C130 C131 1-164-690-91 1-163-135-00 1-163-038-91 1-164-336-11 1-163-038-91 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.0022uF 5% 560PF 5% 0.1uF 0.33uF 0.1uF 50V 50V 25V 25V 25V C132 C133 C134 C135 C136 1-163-037-11 1-163-145-00 1-164-346-11 1-163-251-11 1-164-005-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.022uF 10% 0.0015uF 5% 1uF 100PF 5% 0.47uF 25V 50V 16V 50V 25V C137 C139 C140 C141 C142 1-163-021-91 1-163-235-11 1-163-235-11 1-163-038-91 1-163-038-91 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.01uF 22PF 22PF 0.1uF 0.1uF 10% 5% 5% 50V 50V 50V 25V 25V C145 C146 C147 C148 C149 1-135-201-11 1-135-201-11 1-163-275-11 1-163-275-11 1-164-346-11 TANTALUM CHIP TANTALUM CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 10uF 10uF 0.001uF 0.001uF 1uF 20% 20% 5% 5% 4V 4V 50V 50V 16V C153 C154 1-135-259-11 TANTAL. CHIP 1-163-235-11 CERAMIC CHIP 10uF 22PF 20% 5% 6.3V 50V < CAPACITOR > C801 C803 C804 C805 C806 1-124-720-11 1-162-215-31 1-124-724-11 1-162-215-31 1-164-159-11 ELECT CERAMIC ELECT CERAMIC CERAMIC 4.7uF 47PF 47uF 47PF 0.1uF C807 C808 C809 C841 C842 1-164-159-11 1-164-159-11 1-163-038-91 1-126-948-11 1-126-948-11 CERAMIC CERAMIC CERAMIC ELECT ELECT 0.1uF 0.1uF 0.1uF 100uF 100uF C851 C853 C854 C855 C856 1-124-720-11 1-162-215-31 1-124-724-11 1-162-215-31 1-164-159-11 ELECT CERAMIC ELECT CERAMIC CERAMIC 4.7uF 47PF 47uF 47PF 0.1uF C857 1-164-159-11 CERAMIC 0.1uF 20% 5% 20% 5% 20% 20% 20% 5% 20% 5% 50V 50V 50V 50V 50V 50V 50V 25V 35V 35V 50V 50V 50V 50V 50V 50V < IC > IC801 IC851 8-759-331-41 IC LM3876TF 8-759-331-41 IC LM3876TF < RESISTOR > R801 R802 R803 R804 R805 1-249-417-11 1-249-437-11 1-249-417-11 1-249-437-11 1-249-433-11 CARBON CARBON CARBON CARBON CARBON 1K 47K 1K 47K 22K 5% 5% 5% 5% 5% 1/4W F 1/4W 1/4W F 1/4W 1/4W R806 R851 R852 R853 R854 1-249-389-11 1-249-417-11 1-249-437-11 1-249-417-11 1-249-437-11 CARBON CARBON CARBON CARBON CARBON 4.7 1K 47K 1K 47K 5% 5% 5% 5% 5% 1/4W F 1/4W F 1/4W 1/4W F 1/4W R855 R856 1-249-433-11 CARBON 1-249-389-11 CARBON 22K 4.7 5% 5% 1/4W 1/4W F ************************************************************** A-4673-402-B BD BOARD, COMPLETE ****************** * < CAPACITOR > C101 C102 1-126-607-11 ELECT CHIP 1-163-275-11 CERAMIC CHIP 47uF 0.001uF 20% 5% 4V 50V – 60 – 10% 20% 10% 20% 10% 50V 25V 4V 50V 25V BD Ref. No. Part No. Description Remark Ref. No. < CONNECTOR > CNU101 1-770-014-11 CONNECTOR, FFC/FPC 16P CNU102 1-770-013-11 CONNECTOR, FFC/FPC 19P < IC > IC101 IC102 IC103 IC104 8-752-074-34 8-759-291-06 8-752-372-94 8-759-185-29 IC IC IC IC CXA1782BQ BA6397FP CXD2507AQ PCM1710U-B < TRANSISTOR > Q101 Q102 Q103 8-729-010-08 TRANSISTOR MSB710-R 8-729-424-08 TRANSISTOR UN2111 8-729-421-22 TRANSISTOR UN2211 CHEMI-CON Part No. Description R145 R146 R147 R148 1-216-097-91 1-216-097-91 1-216-049-91 1-216-049-91 RES,CHIP RES,CHIP RES,CHIP RES,CHIP 100K 100K 1K 1K 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W Remark R149 R150 R151 R152 R153 1-216-049-91 1-216-037-00 1-216-037-00 1-216-037-00 1-216-082-00 RES,CHIP METAL CHIP METAL CHIP METAL CHIP RES,CHIP 1K 330 330 330 24K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R154 R156 R157 R158 1-216-065-91 1-216-085-00 1-216-069-00 1-216-001-00 RES,CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 33K 6.8K 10 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W < VARIABLE RESISTOR > < RESISTOR > R102 R103 R104 R105 R106 1-216-001-00 1-216-049-91 1-216-097-91 1-216-093-91 1-216-093-91 METAL CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 10 1K 100K 68K 68K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R107 R108 R109 R112 R113 1-216-093-91 1-216-093-91 1-216-097-91 1-216-083-00 1-216-083-00 RES,CHIP RES,CHIP RES,CHIP METAL CHIP METAL CHIP 68K 68K 100K 27K 27K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R114 R115 R116 R117 R118 1-216-101-00 1-216-101-00 1-216-061-00 1-216-069-00 1-216-049-91 METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES,CHIP 150K 150K 3.3K 6.8K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R119 R120 R121 R122 R123 1-216-089-91 1-216-089-91 1-216-114-00 1-216-097-91 1-216-099-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP METAL CHIP 47K 47K 510K 100K 120K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R124 R125 R126 R127 R128 1-216-091-00 1-216-069-00 1-216-063-91 1-216-089-91 1-216-105-91 METAL CHIP METAL CHIP RES,CHIP RES,CHIP RES,CHIP 56K 6.8K 3.9K 47K 220K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R129 R130 R131 R132 R133 1-216-049-91 1-216-079-00 1-216-079-00 1-216-061-00 1-216-061-00 RES,CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 1K 18K 18K 3.3K 3.3K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R134 R135 R136 R137 R138 1-216-065-91 1-216-065-91 1-216-073-00 1-216-065-91 1-216-049-91 RES,CHIP RES,CHIP METAL CHIP RES,CHIP RES,CHIP 4.7K 4.7K 10K 4.7K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R139 R140 R141 R142 R143 1-216-033-00 1-216-081-00 1-216-061-00 1-216-061-00 1-216-121-91 METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES,CHIP 220 22K 3.3K 3.3K 1M 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R144 1-216-073-00 METAL CHIP 10K 5% 1/10W RV101 RV102 RV103 1-223-587-11 RES, ADJ, CARBON 22K 1-223-587-11 RES, ADJ, CARBON 22K 1-223-587-11 RES, ADJ, CARBON 22K < SWITCH > S101 1-572-085-11 SWITCH, LEAF (LIMIT) < VIBRATOR > X101 1-579-280-11 VIBRATOR, CRYSTAL (16.9344MHz) ************************************************************** A-4419-064-A CHEMI-CON BOARD, COMPLETE ************************* * < CAPACITOR > C503 C551 C553 C554 C555 1-126-948-11 1-128-131-11 1-126-933-11 1-164-159-11 1-163-038-91 ELECT ELECT ELECT CERAMIC CERAMIC CHIP 100uF 22uF 100uF 0.1uF 0.1uF 20% 20% 20% 35V 50V 16V 50V 25V C556 C971 C972 C975 C976 1-126-948-11 1-126-042-11 1-126-042-11 1-136-165-00 1-136-165-00 ELECT ELECT ELECT FILM FILM 100uF 3300uF 3300uF 0.1uF 0.1uF 20% 20% 20% 5% 5% 35V 35V 35V 50V 50V < CONNECTOR > * CN501 * CN551 1-770-729-11 CONNECTOR, BOARD TO BOARD 10P 1-564-506-11 PLUG, CONNECTOR 3P < DIODE > D553 D554 D971 D972 8-719-933-47 8-719-933-39 8-719-062-40 8-719-024-99 DIODE DIODE DIODE DIODE HZS7B2L HZS6C1L D4SBL20UF3 11ES2-NTA2B < TRANSISTOR > Q505 Q551 Q552 Q553 – 61 – 8-729-900-53 8-729-620-05 8-729-620-05 8-729-026-68 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114EK 2SC2603-EF 2SC2603-EF 2SD2525(TP) CHEMI-CON Ref. No. Part No. CONNECTOR LOADING HP Description Remark Ref. No. L861 < RESISTOR > R505 R506 R551 R552 R553 1-216-097-91 1-216-085-00 1-216-049-91 1-216-097-91 1-247-887-00 RES,CHIP METAL CHIP RES,CHIP RES,CHIP CARBON 100K 33K 1K 100K 220K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/4W R554 R821 R822 R871 R872 1-216-065-91 1-260-089-11 1-260-089-11 1-260-089-11 1-260-089-11 RES,CHIP CARBON CARBON CARBON CARBON 4.7K 150 150 150 150 5% 5% 5% 5% 5% 1/10W 1/2W 1/2W 1/2W 1/2W Description Remark < TRANSISTOR > Q501 Q502 Q503 Q504 8-729-029-66 8-729-620-05 8-729-620-05 8-729-620-05 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114ESA 2SC2603-EF 2SC2603-EF 2SC2603-EF < RESISTOR > ************************************************************** R501 R502 R503 ! R504 R556 1-671-614-11 CONNECTOR BOARD *************** * Part No. 1-420-872-00 COIL, AIR-CORE 1-247-887-00 1-249-389-11 1-249-438-11 1-219-122-91 1-249-441-11 CARBON CARBON CARBON FUSIBLE CARBON 220K 4.7 56K 0.33 100K 5% 5% 5% 5% 5% 1/4W 1/4W F 1/4W 1/4W F 1/4W R557 R806 1-249-441-11 CARBON 1-249-389-11 CARBON 100K 4.7 5% 5% R809 R811 R856 1-249-437-11 CARBON 1-260-076-11 CARBON 1-249-389-11 CARBON 47K 10 4.7 5% 5% 5% 1/4W 1/4W F (AEP,UK) 1/4W 1/2W 1/4W F (AEP,UK) R859 R861 R881 R882 R883 1-249-438-11 1-260-076-11 1-249-431-11 1-249-431-11 1-249-425-11 56K 10 15K 15K 4.7K 5% 5% 5% 5% 5% < CAPACITOR > C311 C312 C501 C502 C781 1-126-933-11 1-164-159-11 1-126-933-11 1-126-948-11 1-164-159-11 ELECT CERAMIC ELECT ELECT CERAMIC 100uF 0.1uF 100uF 100uF 0.1uF C782 C785 C811 1-164-159-11 CERAMIC 1-164-159-11 CERAMIC 1-164-159-11 CERAMIC 0.1uF 0.1uF 0.1uF C812 1-164-159-11 CERAMIC 0.1uF C813 1-164-159-11 CERAMIC 0.1uF C861 1-164-159-11 CERAMIC 0.1uF C862 1-164-159-11 CERAMIC 0.1uF C863 1-164-159-11 CERAMIC 0.1uF 20% 20% 20% 16V 50V 16V 35V 50V 50V 50V 50V (AEP,UK) 50V (AEP,UK) 50V (AEP,UK) CARBON CARBON CARBON CARBON CARBON 1/4W 1/2W 1/4W 1/4W 1/4W F < RELAY > RY501 1-515-920-11 RELAY (24V) < TERMINAL > 50V (AEP,UK) 50V (AEP,UK) 50V (AEP,UK) TM811 1-537-842-11 TERMINAL BOARD (SPEAKER) ************************************************************** 1-671-609-11 HP BOARD ******** * < CONNECTOR > < CAPACITOR > * CN781 CN811 * CN961 CN962 D501 D556 D557 D881 1-566-856-11 1-766-921-11 1-774-813-11 1-695-342-31 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 SOCKET, CONNECTOR 5P CONNECTOR, BOARD TO BOARD 10P CONNECTOR, BOARD TO BOARD 7P PIN, CONNECTOR (PC BOARD) 19P C681 C682 C683 1-162-294-31 CERAMIC 1-162-294-31 CERAMIC 1-164-159-11 CERAMIC 0.001uF 0.001uF 0.1uF < DIODE > C684 1-164-159-11 CERAMIC 0.1uF DIODE DIODE DIODE DIODE 1SS119-25 1SS119-25 1SS119-25 1SS119-25 10% 10% 50V 50V 50V (AEP,UK) 50V < JACK > J667 1-774-933-11 JACK (LARGE TYPE)(PHONES) ************************************************************** < FERRITE BEAD > 1-634-461-11 LOADING BOARD ************* * FB782 1-412-473-21 INDUCTOR 0UH < CONNECTOR > < IC > IC311 * CN291 8-749-923-04 IC TOTX178 (DIGITAL OPTICAL CD AUX) < SWITCH > < COIL > L311 L801 1-564-498-11 PIN, CONNECTOR 5P S291 S292 1-410-322-11 INDUCTOR 3.3uH 1-420-872-00 COIL, AIR-CORE – 1-571-924-11 SWITCH, LEAF (LOAD OUT) 1-571-924-11 SWITCH, LEAF (LOAD IN) ************************************************************** The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. 62 – MAIN Ref. No. Part No. * A-4419-059-A MAIN BOARD, COMPLETE (AEP,UK) ******************** Description Remark * A-4419-070-A MAIN BOARD, COMPLETE (SP,HK) ******************** * 4-212-590-11 HOLDER (FL) < CAPACITOR > C100 C101 C102 C103 C104 1-216-295-91 1-163-251-11 1-163-251-11 1-163-251-11 1-163-251-11 SHORT CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0 100PF 100PF 100PF 100PF C105 C106 C107 C121 C122 1-163-251-11 1-164-159-11 1-163-038-91 1-126-022-11 1-130-475-00 CERAMIC CHIP CERAMIC CERAMIC CHIP ELECT MYLAR 100PF 5% 0.1uF 0.1uF 47uF 20% 0.0022uF 5% 50V 50V 25V 10V 50V C123 C126 C127 C128 C129 1-126-964-11 1-126-963-11 1-126-963-11 1-126-963-11 1-126-964-11 ELECT ELECT ELECT ELECT ELECT 10uF 4.7uF 4.7uF 4.7uF 10uF 20% 20% 20% 20% 20% 50V 50V 50V 50V 50V C130 C131 C132 C134 C135 1-136-165-00 1-126-957-11 1-130-479-00 1-136-165-00 1-136-165-00 FILM ELECT MYLAR FILM FILM 0.1uF 0.22uF 0.0047uF 0.1uF 0.1uF 5% 20% 5% 5% 5% 50V 50V 50V 50V 50V C137 C139 C141 C142 C143 1-126-961-11 1-164-005-11 1-126-043-11 1-126-963-11 1-163-133-00 ELECT CERAMIC CHIP ELECT ELECT CERAMIC CHIP 2.2uF 0.47uF 0.47uF 4.7uF 470PF 20% 20% 20% 5% 50V 25V 50V 50V 50V C191 C192 C193 C194 C195 1-164-159-11 1-163-038-91 1-163-038-91 1-163-141-00 1-163-141-00 CERAMIC CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 0.1uF 0.001uF 0.001uF 5% 5% 50V 25V 25V 50V 50V C196 C197 C198 C199 C201 1-162-294-31 1-124-995-11 1-164-159-11 1-124-995-11 1-163-251-11 CERAMIC ELECT CERAMIC ELECT CERAMIC CHIP 0.001uF 220uF 0.1uF 220uF 100PF 10% 20% 20% 5% 50V 10V 50V 10V 50V C202 C203 C204 C205 C221 1-163-251-11 1-163-251-11 1-163-251-11 1-163-251-11 1-126-022-11 CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP CERAMIC CHIP ELECT 100PF 100PF 100PF 100PF 47uF 5% 5% 5% 5% 20% 50V 50V 50V 50V 10V C222 C223 C224 C226 C227 1-130-475-00 1-130-471-00 1-104-664-11 1-126-963-11 1-126-963-11 MYLAR MYLAR ELECT ELECT ELECT 0.0022uF 0.001uF 47uF 4.7uF 4.7uF 5% 5% 20% 20% 20% 50V 50V 16V 50V 50V C228 C229 C230 C231 C232 1-126-963-11 1-126-964-11 1-136-165-00 1-126-957-11 1-130-479-00 ELECT ELECT FILM ELECT MYLAR 4.7uF 10uF 0.1uF 0.22uF 0.0047uF 20% 20% 5% 20% 5% 50V 50V 50V 50V 50V 5% 5% 5% 5% 50V 50V 50V 50V Ref. No. Part No. Description C234 C235 C237 C241 C242 1-136-165-00 1-136-165-00 1-126-961-11 1-126-043-11 1-126-963-11 FILM FILM ELECT ELECT ELECT 0.1uF 0.1uF 2.2uF 0.47uF 4.7uF 5% 5% 20% 20% 20% 50V 50V 50V 50V 50V Remark C243 C301 C302 C303 C304 1-163-133-00 1-124-997-11 1-163-038-91 1-124-473-11 1-163-038-91 CERAMIC CHIP ELECT CERAMIC CHIP ELECT CERAMIC CHIP 470PF 470uF 0.1uF 1000uF 0.1uF 5% 20% 50V 10V 25V 10V 25V C305 C306 C351 C352 C353 1-163-251-11 1-163-251-11 1-104-664-11 1-163-031-11 1-162-306-11 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC 100PF 100PF 47uF 0.01uF 0.01uF 5% 5% 20% C354 C401 C402 C403 1-163-031-11 1-162-294-31 1-162-294-31 1-162-306-11 CERAMIC CHIP CERAMIC CERAMIC CERAMIC 0.01uF 0.001uF 0.001uF 0.01uF 10% 10% 20% C404 1-162-306-11 CERAMIC 0.01uF 20% C405 C451 1-163-251-11 CERAMIC CHIP 1-126-961-11 ELECT 100PF 2.2uF 5% 20% C452 1-162-306-11 CERAMIC 0.01uF 20% C453 1-162-291-31 CERAMIC 560PF 10% C454 1-126-964-11 ELECT 10uF 20% C455 1-162-306-11 CERAMIC 0.01uF 20% C456 1-163-239-11 CERAMIC CHIP 33PF 5% C457 1-163-239-11 CERAMIC CHIP 33PF 5% C701 C702 1-163-102-00 CERAMIC CHIP 1-163-233-11 CERAMIC CHIP 24PF 18PF 5% 5% C703 C704 C748 C751 C752 1-163-038-91 1-163-038-91 1-164-159-11 1-124-589-11 1-163-038-91 CERAMIC CHIP CERAMIC CHIP CERAMIC ELECT CERAMIC CHIP 0.1uF 0.1uF 0.1uF 47uF 0.1uF C753 C754 C755 C756 C757 1-126-925-11 1-163-038-91 1-124-589-11 1-164-159-11 1-164-159-11 ELECT CERAMIC CHIP ELECT CERAMIC CERAMIC 470uF 0.1uF 47uF 0.1uF 0.1uF C758 C759 C791 1-164-159-11 CERAMIC 1-104-905-11 CAPACITOR 1-163-038-91 CERAMIC CHIP 0.1uF 0.22F 0.1uF 20% 20% 20% 20% 20% < CONNECTOR > * CN101 CN301 * CN351 CN401 CN701 – 63 – 1-564-506-11 1-770-067-11 1-564-339-00 1-774-289-11 1-784-601-11 PLUG, CONNECTOR 3P CONNECTOR, FFC/FPC 19P PIN, CONNECTOR 5P PIN, CONNECTOR (PC BOARD) 15P SOCKET, CONNECTOR (NON ZIF)13P 50V 50V 16V 50V 16V 50V 50V 50V 16V (AEP,UK) 16V (AEP,UK) 50V 50V (AEP,UK) 16V (AEP,UK) 50V (AEP,UK) 50V (AEP,UK) 16V (AEP,UK) 50V (AEP,UK) 50V (AEP,UK) 50V 50V 25V 25V 50V 16V 25V 10V 25V 16V 50V 16V 50V 5.5V 25V MAIN Ref. No. CN702 CN703 CN704 CN705 Part No. Description 1-785-462-11 1-770-380-11 1-770-380-11 1-695-342-31 SOCKET, CONNECTOR (NON-ZIF)11P CONNECTOR, BOARD TO BOARD 8P CONNECTOR, BOARD TO BOARD 8P PIN, CONNECTOR (PC BOARD) 19P Remark < DIODE > D351 D751 D752 D753 D755 8-719-921-40 8-719-911-19 8-719-024-99 8-719-911-19 8-719-911-19 DIODE DIODE DIODE DIODE DIODE MTZJ-4.7C 1SS119-25 11ES2-NTA2B 1SS119-25 1SS119-25 D791 D792 D793 8-719-914-42 DIODE DA204K 8-719-914-42 DIODE DA204K 8-719-914-42 DIODE DA204K < FERRITE BEAD > FB301 FB791 FB792 1-412-473-21 INDUCTOR 1-500-445-21 FERRITE 1-500-445-21 FERRITE 0UH 0UH 0UH < IC > IC101 IC102 IC103 IC351 IC451 8-759-494-40 8-759-300-71 8-759-100-96 8-759-822-09 8-759-560-51 IC IC IC IC IC M62428AFP600C HD14053BFP UPC4558G2 LB1641 BU1924F (AEP,UK) IC701 IC791 IC951 8-759-549-47 IC uPD780018AYGF-015-3BA 8-759-549-80 IC P82B715TD.118 8-759-635-63 IC M51943BSL Ref. No. L405 Part No. Description Remark 1-410-482-31 INDUCTOR 100uH < TRANSISTOR > Q103 Q111 Q112 Q121 Q141 8-729-900-53 8-729-107-46 8-729-107-46 8-729-120-28 8-729-107-46 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114EK 2SC3624A-L15 2SC3624A-L15 2SC1623-L5L6 2SC3624A-L15 Q181 Q182 Q183 Q211 Q212 8-729-029-21 8-729-029-21 8-729-029-21 8-729-107-46 8-729-107-46 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTA114ESA-TP DTA114ESA-TP DTA114ESA-TP 2SC3624A-L15 2SC3624A-L15 Q222 Q241 Q450 Q751 Q752 8-729-120-28 8-729-107-46 8-729-620-05 8-729-620-05 8-729-600-22 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SC1623-L5L6 2SC3624A-L15 2SC2603-EF 2SC2603-EF 2SA1235-F Q753 Q781 Q782 Q783 Q791 8-729-027-23 8-729-027-23 8-729-107-46 8-729-107-46 8-729-025-28 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTA114EK DTA114EK 2SC3624A-L15 2SC3624A-L15 2SK1828 Q792 8-729-025-28 TRANSISTOR 2SK1828 < RESISTOR > < JACK > J101 J102 1-766-396-11 JACK, PIN 4P (MD IN/OUT) 1-779-688-11 JACK, PIN 6P (TAPE,CS/BS IN/OUT) < JUMPER RESISTOR > JW301 JW302 JW303 JW304 JW412 1-216-295-91 1-216-295-91 1-216-296-91 1-216-296-91 1-216-295-91 SHORT SHORT SHORT SHORT SHORT 0 0 0 0 0 JW413 JW701 JW734 JW735 JW791 1-216-295-91 1-216-296-91 1-216-295-91 1-216-295-91 1-216-295-91 SHORT SHORT SHORT SHORT SHORT 0 0 0 0 (SP, HK) 0 JW792 JW793 JW794 JW795 JW796 1-216-296-91 1-216-296-91 1-216-296-91 1-216-295-91 1-216-296-91 SHORT SHORT SHORT SHORT SHORT 0 0 0 0 0 JW797 JW798 1-216-296-91 SHORT 1-216-296-91 SHORT 0 0 < COIL > L401 L402 L403 L404 1-410-482-31 1-410-482-31 1-410-482-31 1-410-482-31 INDUCTOR INDUCTOR INDUCTOR INDUCTOR 100uH 100uH 100uH 100uH R101 R102 R103 R104 R105 1-216-077-00 1-216-073-00 1-216-033-00 1-216-049-91 1-216-105-91 METAL CHIP METAL CHIP METAL CHIP RES,CHIP RES,CHIP 15K 10K 220 1K 220K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R106 R107 R108 R109 R111 1-216-033-00 1-216-077-00 1-216-073-00 1-216-089-91 1-216-049-91 METAL CHIP METAL CHIP METAL CHIP RES,CHIP RES,CHIP 220 15K 10K 47K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R112 R113 R114 R115 R116 1-216-065-91 1-216-049-91 1-216-065-91 1-216-097-91 1-216-093-91 RES,CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 4.7K 1K 4.7K 100K 68K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R117 R123 R124 R125 R126 1-216-089-91 1-216-055-00 1-216-069-00 1-216-104-00 1-216-081-00 RES,CHIP METAL CHIP METAL CHIP METAL CHIP METAL CHIP 47K 1.8K 6.8K 200K 22K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R127 R128 R129 R130 R139 1-216-061-00 1-216-081-00 1-216-121-91 1-216-073-00 1-216-121-91 METAL CHIP METAL CHIP RES,CHIP METAL CHIP RES,CHIP 3.3K 22K 1M 10K 1M 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R141 R142 R143 R181 R183 1-216-057-00 1-216-065-91 1-216-089-91 1-247-887-00 1-247-887-00 METAL CHIP RES,CHIP RES,CHIP CARBON CARBON 2.2K 4.7K 47K 220K 220K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/4W 1/4W R185 1-247-887-00 CARBON 220K 5% 1/4W – 64 – MAIN Ref. No. Part No. Description R191 R192 R193 R201 1-249-413-11 1-249-413-11 1-249-413-11 1-216-077-00 CARBON CARBON CARBON METAL CHIP 470 470 470 15K 5% 5% 5% 5% Remark 1/4W F 1/4W F 1/4W F 1/10W R202 R203 R204 R205 R206 1-216-073-00 1-216-033-00 1-216-049-91 1-216-105-91 1-216-033-00 METAL CHIP METAL CHIP RES,CHIP RES,CHIP METAL CHIP 10K 220 1K 220K 220 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R207 R208 R211 R212 R213 1-216-077-00 1-216-073-00 1-216-049-91 1-216-065-91 1-216-049-91 METAL CHIP METAL CHIP RES,CHIP RES,CHIP RES,CHIP 15K 10K 1K 4.7K 1K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R214 R215 R216 R217 R223 1-216-065-91 1-216-097-91 1-216-093-91 1-216-089-91 1-216-055-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP METAL CHIP 4.7K 100K 68K 47K 1.8K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R224 R225 R227 R228 R229 1-216-069-00 1-216-104-00 1-216-061-00 1-216-081-00 1-216-121-91 METAL CHIP METAL CHIP METAL CHIP METAL CHIP RES,CHIP 6.8K 200K 3.3K 22K 1M 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R230 R241 R242 R243 R351 1-216-073-00 1-249-421-11 1-216-065-91 1-216-089-91 1-247-807-31 METAL CHIP CARBON RES,CHIP RES,CHIP CARBON 10K 2.2K 4.7K 47K 100 5% 5% 5% 5% 5% 1/10W 1/4W F 1/10W 1/10W 1/4W R401 R402 R403 R404 R405 1-249-417-11 1-249-417-11 1-216-025-91 1-216-025-91 1-216-025-91 CARBON CARBON RES,CHIP RES,CHIP RES,CHIP 1K 1K 100 100 100 5% 5% 5% 5% 5% R406 R407 1-216-025-91 RES,CHIP 1-249-405-11 CARBON 100 100 5% 5% R408 1-249-429-11 CARBON 10K 5% R409 1-249-417-11 CARBON 1K 5% R410 1-216-073-00 METAL CHIP 10K 5% R411 ! R451 1-216-073-00 METAL CHIP 1-249-401-11 CARBON 10K 47 5% 5% R452 1-216-129-00 METAL CHIP 2.2M 5% R453 1-216-049-91 RES,CHIP 1K 5% R454 1-249-409-11 CARBON 220 5% R455 1-249-409-11 CARBON 220 5% R456 R457 R701 R702 1-249-441-11 1-249-441-11 1-249-425-11 1-216-109-00 CARBON CARBON CARBON METAL CHIP 100K 100K 4.7K 330K 5% 5% 5% 5% 1/4W F (AEP,UK) 1/4W 1/4W 1/4W F 1/10W R704 R705 1-216-061-00 METAL CHIP 1-216-061-00 METAL CHIP 3.3K 3.3K 5% 5% 1/10W 1/10W Ref. No. Part No. PANEL Description Remark R706 R707 R708 1-216-073-00 METAL CHIP 1-216-073-00 METAL CHIP 1-216-097-91 RES,CHIP 10K 10K 100K 5% 5% 5% 1/10W 1/10W 1/10W R709 R710 R711 R712 R713 1-216-025-91 1-216-025-91 1-216-025-91 1-216-025-91 1-216-073-00 RES,CHIP RES,CHIP RES,CHIP RES,CHIP METAL CHIP 100 100 100 100 10K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W R714 R719 R720 R721 R722 1-216-073-00 1-216-049-91 1-247-807-31 1-247-807-31 1-247-807-31 METAL CHIP RES,CHIP CARBON CARBON CARBON 10K 1K 100 100 100 5% 5% 5% 5% 5% 1/10W 1/10W 1/4W 1/4W 1/4W R723 R724 R725 R726 R727 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 CARBON CARBON CARBON CARBON CARBON 100 100 100 100 100 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W R728 R730 R731 R732 R733 1-216-025-91 1-247-807-31 1-247-807-31 1-247-807-31 1-247-807-31 RES,CHIP CARBON CARBON CARBON CARBON 100 100 100 100 100 5% 5% 5% 5% 5% 1/10W 1/4W 1/4W 1/4W 1/4W R735 1-216-097-91 RES,CHIP 100K 5% R734 R736 R738 R739 1-216-097-91 1-216-097-91 1-247-807-31 1-216-097-91 RES,CHIP RES,CHIP CARBON RES,CHIP 100K 100K 100 100K 5% 5% 5% 5% 1/10W (AEP,UK) 1/10W 1/10W 1/4W 1/10W 1/4W F 1/4W F 1/10W 1/10W 1/10W R740 R741 R751 R752 R753 1-249-417-11 1-216-073-00 1-249-417-11 1-249-425-11 1-249-437-11 CARBON METAL CHIP CARBON CARBON CARBON 1K 10K 1K 4.7K 47K 5% 5% 5% 5% 5% 1/4W F 1/10W 1/4W F 1/4W F 1/4W 1/10W 1/4W F (AEP,UK) 1/4W F (AEP,UK) 1/4W F (AEP,UK) 1/10W R754 R755 R756 R781 R782 1-249-437-11 1-249-429-11 1-216-025-91 1-216-073-00 1-216-045-00 CARBON CARBON RES,CHIP METAL CHIP METAL CHIP 47K 10K 100 10K 680 5% 5% 5% 5% 5% 1/4W 1/4W 1/10W 1/10W 1/10W R783 R791 R792 R793 R794 1-216-045-00 1-216-065-91 1-216-065-91 1-216-065-91 1-216-065-91 METAL CHIP RES,CHIP RES,CHIP RES,CHIP RES,CHIP 680 4.7K 4.7K 4.7K 4.7K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/4W F (AEP,UK) 1/10W (AEP,UK) 1/10W (AEP,UK) 1/4W F (AEP,UK) < VIBRATOR > X601 X701 X702 1-579-900-21 VIBRATOR, CRYSTAL (4.332MHz)(AEP,UK) 1-579-233-11 VIBRATOR, CERAMIC (5MHz) 1-567-098-41 VIBRATOR, CRYSTAL (32kHz) ************************************************************** A-4419-060-A PANEL BOARD, COMPLETE ********************* * < CAPACITOR > C601 C602 C603 – 65 – 1-163-141-00 CERAMIC CHIP 1-163-141-00 CERAMIC CHIP 1-163-141-00 CERAMIC CHIP 0.001uF 0.001uF 0.001uF 5% 5% 5% 50V 50V 50V The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. PANEL Ref. No. PANEL-SW Part No. REG Description Remark C604 C605 1-163-141-00 CERAMIC CHIP 1-162-290-31 CERAMIC 0.001uF 470PF C607 C608 C609 C610 C611 1-163-038-91 1-164-159-11 1-164-159-11 1-162-215-31 1-164-159-11 0.1uF 0.1uF 0.1uF 47PF 0.1uF C612 C613 1-124-589-11 ELECT 1-128-131-11 ELECT CERAMIC CHIP CERAMIC CERAMIC CERAMIC CERAMIC 47uF 22uF 5% 10% 5% 20% 20% 25V 50V 50V 50V 50V 16V 50V Part No. Description S622 S623 S624 S625 1-762-875-21 1-762-875-21 1-762-875-21 1-762-875-21 SWITCH, KEYBOARD (±/), TUNING +) SWITCH, KEYBOARD (≠/0, TUNING -) SWITCH, KEYBOARD (π) SWITCH, KEYBOARD (fl) S631 S632 S633 S634 1-762-875-21 1-762-875-21 1-762-875-21 1-762-875-21 SWITCH, KEYBOARD (1/u) SWITCH, KEYBOARD (DISPLAY) SWITCH, KEYBOARD (FUNCTION) SWITCH, KEYBOARD (TUNER/BAND) 1-671-617-11 PANEL-SW BOARD ************** * 1-695-374-31 PIN, CONNECTOR (PC BOARD) 13P 1-695-372-31 PIN, CONNECTOR (PC BOARD) 11P < SWITCH > < DIODE > DIODE DIODE DIODE DIODE DIODE S699 D601 D602 D603 D604 D605 8-719-072-76 8-719-072-76 8-719-072-76 8-719-072-76 8-719-058-04 D606 8-719-056-13 DIODE SML72423C-TP4 (u) Remark ************************************************************** < CONNECTOR > * CN601 CN603 Ref. No. 50V 50V SEL5E23C-TP15 (±/)) SEL5E23C-TP15 (≠/0) SEL5E23C-TP15 (π) SEL5E23C-TP15 (fl) SEL5223S-TP15 (t) 1-771-516-11 SWITCH, PUSH(DETECTION)(1 KEY) ************************************************************** A-4419-068-A REG BOARD, COMPLETE ******************* * < FUSE > ! F941 ! F942 < FLUORESCENT INDICATOR > FL601 1-517-805-11 INDICATOR TUBE, FLUORESCENT < CAPACITOR > < IC > IC601 IC602 1-532-465-31 FUSE (T3.15AL/250V) 1-532-465-31 FUSE (T3.15AL/250V) 8-759-572-22 IC MSM9202-02GS-KR1 8-759-459-85 IC NJL63H400A C921 C922 C923 C924 C925 1-126-767-11 1-164-159-11 1-126-964-11 1-164-159-11 1-126-964-11 ELECT CERAMIC ELECT CERAMIC ELECT 1000uF 0.1uF 10uF 0.1uF 10uF 20% C941 C942 C943 C944 C945 1-126-934-11 1-126-933-11 1-164-159-11 1-126-933-11 1-124-995-11 ELECT ELECT CERAMIC ELECT ELECT 220uF 100uF 0.1uF 100uF 220uF 20% 20% C946 C947 C948 C949 C951 1-126-934-11 1-124-995-11 1-164-159-11 1-164-159-11 1-126-940-11 ELECT ELECT CERAMIC CERAMIC ELECT 220uF 220uF 0.1uF 0.1uF 330uF 20% 20% C952 C953 C954 1-126-967-11 ELECT 1-164-159-11 CERAMIC 1-162-306-11 CERAMIC 47uF 0.1uF 0.01uF 20% 20% 20% 16V 50V 50V 50V 50V < TRANSISTOR > Q601 8-729-900-53 TRANSISTOR DTC114EK < RESISTOR > R601 R602 R603 R604 R605 1-216-025-91 1-216-025-91 1-216-025-91 1-216-025-91 1-249-437-11 RES,CHIP RES,CHIP RES,CHIP RES,CHIP CARBON 100 100 100 100 47K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/4W R606 R607 R608 R609 R610 1-247-843-11 1-216-029-00 1-216-029-00 1-249-413-11 1-249-413-11 CARBON METAL CHIP METAL CHIP CARBON CARBON 3.3K 150 150 470 470 5% 5% 5% 5% 5% 1/4W 1/10W 1/10W 1/4W F 1/4W F R611 R612 R613 R621 R622 1-249-411-11 1-216-029-00 1-216-029-00 1-249-413-11 1-249-415-11 CARBON METAL CHIP METAL CHIP CARBON CARBON 330 150 150 470 680 5% 5% 5% 5% 5% 1/4W 1/10W 1/10W 1/4W F 1/4W F R623 R624 R631 R632 R633 1-249-417-11 1-249-419-11 1-249-413-11 1-249-415-11 1-249-417-11 CARBON CARBON CARBON CARBON CARBON 1K 1.5K 470 680 1K 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W 1/4W 1/4W 20% 20% 20% 20% 16V 16V 50V 16V 10V 16V 10V 50V 50V 25V 50V 50V 16V < CONNECTOR > < SWITCH > S621 1-762-875-21 SWITCH, KEYBOARD (§) F F F F F * CN942 CN943 CN944 CN945 1-564-522-11 1-770-405-11 1-770-405-11 1-506-481-11 PLUG, CONNECTOR 7P CONNECTOR, BOARD TO BOARD 8P CONNECTOR, BOARD TO BOARD 8P PIN, CONNECTOR 2P < DIODE > D921 D922 D941 D942 D943 8-719-210-21 8-719-210-21 8-719-210-21 8-719-210-21 8-719-210-21 D944 8-719-210-21 DIODE 11EQS04 – 66 – DIODE DIODE DIODE DIODE DIODE 11EQS04 11EQS04 11EQS04 11EQS04 11EQS04 The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. REG Ref. No. D945 D946 D952 Part No. Description Remark Ref. No. 8-719-986-04 DIODE HZS9A1LTA 8-719-986-04 DIODE HZS9A1LTA 8-719-986-26 DIODE HZS12A3LTA < GROUND TERMINAL > Part No. SUB-TRANS TRANS Description Remark D962 D963 D964 8-719-024-99 DIODE 11ES2-NTA2B 8-719-024-99 DIODE 11ES2-NTA2B 8-719-024-99 DIODE 11ES2-NTA2B D965 D966 8-719-986-67 DIODE HZS33-2LTA 8-719-921-37 DIODE MTZJ-4.7 EPT941 1-537-770-21 TERMINAL BOARD, GROUND < IC > < FUSE HOLDER > IC901 FH941 FH942 FH943 FH944 1-533-293-11 1-533-293-11 1-533-293-11 1-533-293-11 FUSE HOLDER FUSE HOLDER FUSE HOLDER FUSE HOLDER < TRANSISTOR > < IC > IC921 IC922 8-759-231-53 IC TA7805S 8-759-373-82 IC TA7807SB < TRANSISTOR > Q941 Q942 Q943 Q951 Q952 8-729-140-96 8-729-040-20 8-729-029-66 8-729-202-67 8-729-026-68 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 2SD774-34 RT1P137L-TP DTC114ESA 2SK246-GR3 2SD2525(TP) 1-249-411-11 CARBON 1-247-843-11 CARBON 330 3.3K Q901 Q961 Q962 Q963 Q964 8-729-029-66 8-729-118-01 8-729-040-19 8-729-040-19 8-729-040-19 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR DTC114ESA 2SB1116-K RT1N137L-TP RT1N137L-TP RT1N137L-TP Q965 Q966 8-729-029-21 TRANSISTOR DTA114ESA-TP 8-729-029-21 TRANSISTOR DTA114ESA-TP < RESISTOR > < RESISTOR > R925 R941 8-759-373-79 IC TA7805SB 5% 5% R901 ! R961 R962 R964 R965 1-249-429-11 1-217-637-00 1-249-429-11 1-249-429-11 1-247-807-31 CARBON FUSIBLE CARBON CARBON CARBON 10K 1 10K 10K 100 5% 5% 5% 5% 5% 1/4W 1/4W F 1/4W 1/4W 1/4W R966 R967 R968 R969 1-247-807-31 1-247-807-31 1-249-428-11 1-249-441-11 CARBON CARBON CARBON CARBON 100 100 8.2K 100K 5% 5% 5% 5% 1/4W 1/4W 1/4W F 1/4W 1/4W 1/4W < THERMISTOR(POSITIVE) > THP941 1-801-671-11 THERMISTOR, POSITIVE THP942 1-801-671-11 THERMISTOR, POSITIVE < RELAY > RY901 1-755-276-11 RELAY, POWER ************************************************************** < TRANSFORMER > A-4419-065-A SUB-TRANS BOARD, COMPLETE ************************* * ! T901 < CAPACITOR > ************************************************************** C901 C902 C903 C904 C962 1-126-935-11 1-126-933-11 1-113-925-11 1-164-159-11 1-128-576-11 ELECT ELECT CERAMIC CERAMIC ELECT 470uF 100uF 0.01uF 0.1uF 100uF C963 C964 1-164-159-11 CERAMIC 1-126-948-11 ELECT 0.1uF 100uF 20% 20% 20% 20% 16V 16V 250V 50V 63V 20% 50V 35V 1-671-615-11 TRANS BOARD *********** * < CONNECTOR > * CN991 * CN992 * CN994 < CONNECTOR > * CN901 CN902 1-433-476-11 TRANSFORMER, POWER 1-564-687-11 PIN, CONNECTOR 3P 1-779-939-11 CONNECTOR, BOARD TO BOARD 7P 1-580-230-31 PIN, CONNECTOR (PC BOARD) 2P 1-568-226-11 PIN, CONNECTOR 2P 1-564-522-11 PLUG, CONNECTOR 7P < FUSE > ! F991 1-532-465-31 FUSE (T3.15AL/250V) < DIODE > < DIODE > D901 D902 D903 D904 D905 8-719-210-21 8-719-210-21 8-719-210-21 8-719-210-21 8-719-911-19 DIODE DIODE DIODE DIODE DIODE 11EQS04 11EQS04 11EQS04 11EQS04 1SS119-25 D906 D961 8-719-911-19 DIODE 1SS119-25 8-719-024-99 DIODE 11ES2-NTA2B D951 D953 8-719-024-99 DIODE 11ES2-NTA2B 8-719-024-99 DIODE 11ES2-NTA2B < FUSE HOLDER > FH991 FH992 – 67 – 1-533-293-11 FUSE HOLDER 1-533-293-11 FUSE HOLDER The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. HCD-SD1 TRANS Ref. No. VOLUME Part No. Description Remark < THERMISTOR(POSITIVE) > THP944 1-801-726-11 THERMISTOR, POSITIVE THP945 1-801-726-11 THERMISTOR, POSITIVE ************************************************************** 1-671-610-11 VOLUME BOARD ************ * < CAPACITOR > C691 C692 1-162-306-11 CERAMIC 1-162-306-11 CERAMIC 0.01uF 0.01uF 20% 20% 16V 16V < CONNECTOR > * CLP691 1-690-880-31 LEAD (WITH CONNECTOR) < SWITCH > S691 1-418-012-11 ENCODER, ROTARY (VOLUME) ************************************************************** MISCELLANEOUS ************* 15 16 53 54 ! 57 1-769-940-11 1-769-972-11 1-790-305-11 1-693-408-11 1-575-651-91 WIRE (FLAT TYPE) (11 CORE) WIRE (FLAT TYPE) (13 CORE) WIRE (FLAT TYPE) (19 CORE) TUNER CORD, POWER 60 ! 65 ! 255 256 ! CN904 1-773-108-11 1-770-019-11 8-848-379-31 1-769-069-11 1-526-794-11 WIRE (FLAT TYPE) (19 CORE)(100mm) ADAPTOR, CONVERSION PLUG 3P (UK,HK) OPTICAL PICK-UP KSS-213B/S-N WIRE (FLAT TYPE) (16 CORE) OUTLET, AC FL601 M101 M102 M551 M904 1-517-805-11 X-4917-523-4 X-4917-504-1 1-698-997-21 A-4660-307-A INDICATOR TUBE, FLUORESCENT MOTOR ASSY (SPINDLE) MOTOR ASSY (SLED) FAN, D.C. MOTOR (L) ASSY ! T991 1-433-478-11 TRANSFORMER, POWER ************************************************************** ************* HARDWARE LIST ************* #1 #2 #4 #5 #6 7-685-871-01 7-685-646-79 7-684-024-04 7-682-562-09 7-624-105-04 SCREW +BVTT 3X6 (S) SCREW +BVTP 3X8 TYPE2 N-S N 4, TYPE 2 SCREW +B 4X10 STOP RING 2.3, TYPE -E #7 #8 7-685-234-19 SCREW +KTP 2.6X8 TYPE2NON-SLIT 7-621-775-10 SCREW +B 2.6X4 The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. Sony Corporation 9-922-969-11 Home A&V Products Company – 68 – 98L0953-1 Printed in Japan © 1998. 12 Published by Quality Assurance Dept. (Shibaura)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 1998:12:24 13:25:28 Producer : Acrobat Distiller 3.02 for Power Macintosh Author : Creator : PageMaker 6.0 Title : Modify Date : 1999:03:12 01:09:00 Page Count : 50 Page Mode : UseThumbs Page Layout : SinglePageEXIF Metadata provided by EXIF.tools