SoundT Studios STS-BLS01 Scooter Bluetooth Speaker User Manual

SoundT Studios LLC Scooter Bluetooth Speaker

User Manual

Main functionProduct PhotoOperationWhat is in boxSpecification Notes and TipsSupport Iphone/Samsung/LG/Huawei/Xiaomi and other 99% bluetooth enable deviceWith built-in polymer battery, playing time upto 5hrs.Adopt import special Anti-slip car pat.Line-in Function Bluetooth, hands free function USB/TF card playing music Beautiful shinning LED lightWarrantyScooter BT speaker *1pcUser manual *1pcUSB charging cable *1pcLine-in cable *1pc* Bluetooth mode:1, Power on speaker, then it will go into bluetooth mode automatically, refresh cellphone bluetooth list find the device "BT03" or "BT-03".2, CLICK "BT03" or "BT-03", then pairing successfully.3, Select music and playing.4, If the calls come in, just pick the calls via speaker, can enjoy talking via speaker, no need to stop bluetooth pairing.* Line-inConnect Line-in cable and audio sources(cellphone, MP3, MP4, PSP, PC etc), then play.* TF/USB modeInsert TF/USB, then will play the music that stored in TF/USB Flash drive, very easy to use.* Power on/off On the plate of speaker, there is a button" ", hold the button for 3 seconds, then will fulfill the function"power on/off"* Shinning LED lightWhen turn on the speaker, the led light will be on automatically.* Volume +/-By click the button" " and " ", pls note: not by holding, just by clicking.* Next/Previous MusicBy holding the button" " and " "1，Model：STS-BLS012, Bluetooth version: V2.1+EDR3, Working range: 10 meters4, Battery: 800mAh polymer lithion battery5, Playing time: upto 5 hrs(50% of max volume)6, Charging time: about 2 hrs7, Driver Dia: 40mm, 4 ohm8, Output: 3W*29, Support TF/USB/Line in/Bluetooth /LED light function* Abnormal sound- If the sound bocomes not continuously and weakly, please charge the speaker, the battery is low.- If the speaker is always on vibrating, please dry the anti-slip pat, and please ensure the pat's protective film has be taken off.* Can not Pair- Check the speaker is " power on" and cellphone bluetooth has been on. if ok, please refresh bluetooth list or close the list and restart,refresh the bluetooth.BT03 speaker is compatible with 99% bluetooth enable device, normally speaking, wont happen unpairing problem.* Can not charge- Change a charging cable and try again.* Bluetooth problem- Will go to sleep mode if the speaker is not on working status for more than 30mins.Have to restart speaker to wake up speaker.Model No.:STS-BLS01Manufacturer: Shenzhen Sinoc electronics co.,ltdADD: No. 303, Bldg. 1, Tianbei Hengqiang Ind. Park, Xincheng Community, Guanlan St., Longhua New Area, ShenzhenTel: 755-21000610Fax: 755-21000385Email: info@sinoc.comReseller/Customer name: Warranty: 12 monthsPurchasing date: Made in ChinaUSER MANUALSCOOTER Bluetooth SpeakerFCC ID: 2AKG6-STS-BLS01
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

Navigation menu