Sounding Audio SA102 Car Audio User Manual EAGLEPLASTIC

Sounding Audio Industrial Ltd. Car Audio EAGLEPLASTIC

User manual

Page 1 of 33 Operation Instruction Manual SA102 Operation Instruction Manual SA102
Page 2 of 33 Operation Instruction Manual SA102 Content 1. Appearance -----------------------------------------------------------------3 2. Wiring Connection --------------------------------------------------------4 3. Front panel description --------------------------------------------------5 4. Main Menu -----------------------------------------------------------------6 5. Settings ----------------------------------------------------------------------7 6. Apple CarPlay -------------------------------------------------------------13 7. Andriod Auto --------------------------------------------------------------14 8. Radio mode----------------------------------------------------------------15 9. SiriusXM® Operation ------------------------------------------------------16 10. USB --------------------------------------------------------------------------22 11. BT Audio --------------------------------------------------------------------24 12. Phone -----------------------------------------------------------------------26 13. Aux IN -----------------------------------------------------------------------29 14. Rear Camera ---------------------------------------------------------------30 15. Remote Control -----------------------------------------------------------31 16. Specification ---------------------------------------------------------------32
Page 3 of 33 Operation Instruction Manual SA102 1. Appearance Main Menu CarPlay Menu Andriod auto Menu
Page 4 of 33 Operation Instruction Manual SA102 2. WIRING CONNECTION
Page 5 of 33 Operation Instruction Manual SA102 3. FRONT PANEL Description ① IR SENSOR IR Remote control signal receiving windows. Max distance is 6-8 meters while facing directly ② POWER Turn Power on or off. During power OFF, press Power button to turn ON the Head unit. During the unit is ON, long press power button to turn OFF the Head unit ③ Home In any mode, touch the Home button to enter to the Main Menu. ④ VOICE In CarPlay or Android mode, touch the VOICE button to activate voice function. ⑤ MUTE To toggle Mute and unmute ⑥ VOL+ Increment the Volume level (0~50). ⑦ VOL- Decrement the Volume level (50~0). ⑧RESET To reset the Head unit for any reason, use a ball pen or pin to press the RESET button. After reset the head unit, the head unit will be restart, all parameter and setting will be kept as pervious status.
Page 6 of 33 Operation Instruction Manual SA102 4. MAIN MENU This is a Two Din Car Audio with the following functions: Apple CarPlay, Android auto, Radio, SiriusXM®, Bluetooth Audio, USB and Phone. The MODE icon in grey mean the corresponding function is not ready or proper device have not been connected. Touch the corresponding MODE icon to enter playing mode. Hidden soft button bar A hidden pop up soft button bar is located at the bottom. Touch the icon to shown the soft button bar. Touch the to hidden. Pop up the soft button bar Hidden the pop up soft button bar Setup, to enter the Settings Menu AUX IN, to enter the AUX and A/V IN interface Dimming, to change Daylight or Night (If lighting detect is OFF in Display Setting) Rear Camera, to enter the camera setting mode EQ Setting, to enter the Audio EQ setting menu Bluetooth pairing
Page 7 of 33 Operation Instruction Manual SA102 5. Settings Touch the icon to enter the Setup menu. The Setup menu is included System Settings, Display Settings, Audio & EQ Settings, Bluetooth Settings and Rear Camera Settings. System Settings The System Settings allow the user to set up the Language, Display Time, Date & Time, Beep Tone, Factory Reset and About. Language Date & Time: - To setting Time display format (12H or 24H), setting the date and time
Page 8 of 33 Operation Instruction Manual SA102 Beep Tone: On/Off - To set the touch button beep tune On or Off Factory Reset - To reset the default factory setting. About - To display the Unit Hardware and Firmware version
Page 9 of 33 Operation Instruction Manual SA102 Display Settings Below is the Display setting menu, user can select Lighting Detect, Daylight Dimming Level, Night Dimming Level, Illumination and Wallpaper. Lighting Detect: On/Off Daylight Dimming Level: 0 – 8 Night Dimming Level: -8 – 0 Illumination: Amber/Yellow/Blue/Green/White/Pink/Light Blue Wallpaper User can select the preset wallpaper or select the picture in USB driver as the wallpaper. Touch the corresponding picture to select the prefer background. Touch “ + “, the head unit will search the USB photo file for wallpaper. Select a picture and touch OK to add the wallpaper
Page 10 of 33 Operation Instruction Manual SA102 Audio & EQ Settings Below shown is the Audio Setting Menu Balance/Fader: Touch the + or – of Balance/Fade to tune for the driver and passenger preference. The value of Balance (Left 15 – Right 15) and Fade (Front 15 – Rear 15) Touch Reset to set both Balance and Fade to zero Subwoofer Output On/Off Subwoofer Filter OFF/ 50Hz/ 80Hz/ 120Hz/ 160Hz 10-Band Equalizer 10 band of EQ tuning, slide the EQ bar to tune each band frequency level according to user preference. Touch Reset to set all Band to 0. Or user can touch < or > at the bottom to select the following preset EQ: Custom/ Jazz/ Hip_Hop /Pop/Rock/R&B/FLAT
Page 11 of 33 Operation Instruction Manual SA102 Bluetooth Settings Touch the Bluetooth Settings from the setting menu will be shown below Connection: On/Off (Select Bluetooth connection on or off) Pairing > (To start the pairing) Device Name: shown the connected phone or device Clear Records (To clear the device list records) Rear Camera Setting Touch Rear View Camera in the Setting Menu to enter rear camera setting interface as follow: Rear Camera Input: On/Off Rear Camera View: Normal/Reverse Parking Assist Guide: On/Off Parking Assist Guide Adjustment
Page 12 of 33 Operation Instruction Manual SA102 Touch > to enter Parking Assist Guide Adjustment interface to show the below screen Select the adjust position and Touch ˂/˃/˄/˅ to adjust. Touch Reset to resume the default Parking Assist Line
Page 13 of 33 Operation Instruction Manual SA102 6. Apple CarPlay Plug the iPhone (iPhone 5 or latter models, and iOS 7.1 or above) through the lightening cable to the USB port of the Head unit. The iPhone will be shown the “CarPlay”. The Head unit will enter the CarPlay interface, the APP that support the CarPlay feature will be displayed on the Head Unit as shown below. Touch the corresponding APP can operation the operation, touch the button to go back to the CarPlay interface. SIRI In CarPlay mode, user can talk to SIRI to control the CarPlay function. Press button to start the SIRI function, or touch the button for 2 second or the HOME button of iPhone in the CarPlay. Home screen to talk to SIRI for playing music, GPS …… Notice: For the SIRI function in the Head unit, the Microphone has to been connected. In CarPlay model, touch button or Main menu icon to enter the Head unit main menu
Page 14 of 33 Operation Instruction Manual SA102 7. Android Auto Install an Android Auto APP to Android mobile with Andorid 5.0 or higher, plug the phone via USB port of the Head unit. The phone will be shown the “Android Auto”. The head unit will enter the Android Auto interface. Voice In Android Auto mode, user can use the voice to control Android Auto. Press the button or icon to start the voice for playing music, GPS ….. Notice: For the Voice function in the head unit, the microphone has to been connected. In Android Auto mode, touch button back to head unit home.
Page 15 of 33 Operation Instruction Manual SA102 8. Radio Mode Touch the Radio mode icon to enter Radio mode Touch FM can change between FM1=>FM2=>FM3 Touch AM can change between AM1=>AM2 Touch SiriusXM to enter SiriusXM Mode, if a SiriusXM tuner is connected with the unit. *Note - A SiriusXM Connect Vehicle Tuner and Subscription are required and sold separatly. Touch for Prescan search, each scanned station will be play for 3 sec, touch again to stop. Touch it for the Auto Scan searching. Touch it to enter EQ setting < Short touch for Tune-, long touch for Seek-. > Short touch for Tune+, long touch for Seek+. Preset channel, Six preset buttons store and recall stations for each band. Touch and slide the preset channel can switch to next band FM1 / FM2 / FM3 or AM1 / AM2 Slide the frequency to Seek +/- to next station Store a Station 1. Tune radio to desired station. 2. Touch and hold the one of the preset channel button for more than 3 seconds, then the preset buttons will be highlighted on the screen, and the preset station will be store.
Page 16 of 33 Operation Instruction Manual SA102 9. Sirius XM Operation SA102 is SiriusXM Satellite Radio Ready, to operation this function, connect an optional SiriusXM Connect Vehicle Tu ner. To enter SiriusXM Mode, touch the SXM icon on the Main Menu. If the screen is shown “Check Tuner” as below, check the SiriusXM tuner connection. Signal Strength The Top Left corner of the screen is showing the Signal Strength of the SiriusXM satellite SiriusXM Signal is Excellent SiriusXM Signal is Good SiriusXM Signal is Weak No SiriusXM Signal In SiriusXM mode, SiriusXM icon is highlighted. Touch FM1 to go to FM radio Touch AM1 to go to AM radio Press < to go to the previous channel Press > to go to the next channel Preset Stations is shown at the bottom, six preset buttons store and recall stations for each band.
Page 17 of 33 Operation Instruction Manual SA102 The following functions are also supported Browse function Favorite Alerts, Touch to list the favorite channel to direct select the channel Direct Tune function EQ Setting function SiriusXM Setting Menu Artist and Song Altert While listening to SiriusXM Satellite Radio, user can mark Artists and/or Songs for which you wish to be alerted. The radio will display an Alert message when a matching artist or song is found on another channel. Then user can choose if you want to tune to that favorite or user can ignore the alert and stay on your current channel. To store an artist or song title, touch on the "artist" or "Song" metadata on the display. User will then be prompted to set the alert for the Artist or the Song Title. User will be alerted when one of your stored artists or songs is playing on another channel. If multile alerts happen at the same time, or the alert gets dismissed, user can touch the ALRT button to list the channels that are currently playing your artist or song. Browser Function Touch to browse the channel. User can browse by select the Channel List and Category List. Channel List Touch “Channel” button at Left side to show the channel listing
Page 18 of 33 Operation Instruction Manual SA102 Slide the bar at right to browse the channel Touch “Channel” button at top right corner to change the display different Metadata as Channel Name, Song Title, Artist/Category Name, Content Info and Category Name Category List Touch the “Category” for the Category list The channel will be shown according to different Category. Touch < or > to select different Category. Touch “Channel” button at top right corner to change the display different Metadata as Channel Name, Song Title, Artist/Category Name and Content Info. Favorite List Touch the “Favorite” for the Favorite List. Direct Tune Press to shown the direct tune interface, user can direct enter the channel number and touch to go to the desire channel. Press backspace to clear the pervious digit
Page 19 of 33 Operation Instruction Manual SA102 SiriusXM Setting Menu Touch to enter the SiriusXM setting menu. It allows user to Change Passcode, Lock Channel, check the Version and select the city. Change Passcode Touch > of the Change Passcode to show the below screen. Input the passcode by using the keypad. Press to clear the pervious digit if input wrong. Touch to confirm input. If the passcode is correct, the below screen will be shown to allow user to Enter NEW Passcode. Input a new 4 digits passcode and select to confirm the new passcode Input the passcode again and press to confirm, then the passcode can be successfully changed. Lock Channel Press > of the Lock Channel in SiriusXM setting menu to enter the Lock channel interface as below. Input the passcode and touch to confirm, press to backspace to remove the pervious digit if input wrongly If the passcode is correct, the unit will enter the lock channel list, select the channel for any channel
Page 20 of 33 Operation Instruction Manual SA102 that has been locked. Tap the locked channel again to remove from the locked channel list. The lock icon will be shown that that you would like to lock. Version Press Version in the menu, the below screen will be shown the SA102 Software version information Reset SiriusXM passcode The default SiriusXM passcode is 0000, If you forget the passcode, follow the steps below to restore the unit to the default. 1. Enter Settings； 2. Set the time format is 24H and the date/time to 2001-1-1 01：01； 3. Enter SiriusXM mode and select direct tune; 4. Input the channel number 9992（the display only can show 999）； 5. Press confirm to reset the SiriusXM passcode to default Radio ID Tune to channel 0 to display the Radio ID. You can use channel up/down or direct tune.
Page 21 of 33 Operation Instruction Manual SA102 Advisory Message On-Screen Display Advisory Message Cause Explanation/Solution Check Antenna Check Antenna The radio has detected a fault with the SiriusXM antenna. The antenna cable may be either disconnected or damaged. • Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner. • Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged. Check Tuner Check Tuner • The radio has difficulty communicating with the SiriusXM Connect Vehicle Tuner. • The tuner may be disconnected or damaged • Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio SiriusXM connector/ cable. • If the problem persists, disconnect and reconnect the tuner and then contact your dealer. No Signal No Signal The SiriusXM Connect Vehicle Tuner has difficulty receiving the SiriusXM satellite signal. • Verify that your vehicle is outdoors with a clear view of the southern sky. • Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside the vehicle. • Move the SiriusXM antenna away from any obstructions. • Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged. • If the problem persists, disconnect and reconnect the tuner and then contact your dealer. Channel Not Available Channel Not Available The channel that you have requested is not a valid SiriusXM channel or the channel that you were listening to is no longer available. You may also see this message briefly when first connecting a new SiriusXM Connect Vehicle tuner. Visit www.siriusxm.com for more information about the SiriusXM channel lineup. Visit www.siriusxm.com/channellineup for more information about the SiriusXM channel lineup. Channel Not Subscribed Channel Not Subscribed The channel that you have requested is not included in your SiriusXM subscription package or the channel that you were listening to is no longer included in your SiriusXM subscription package • Questions about your subscription in the United States please visit http://www.siriusxm.com/activatenow or call SiriusXM Listener Care at 1-866-635-2349. • Questions about your subscription in Canada please visit http://www.siriusxm.ca/help/activation-help/ or call XM Listener Care at 1-877-438-9677 Channel Locked Channel Locked The channel that you have requested is Locked by the radio See the section on Lock Channel, page 18 for more information on the Lock Channel feature and how to access locked channels Please Enter the Lock Code Please Enter the Lock Code User prompted to enter the lock/unlock code. Enter the four digit code to unlock the channel Incorrect Passcode Entered Incorrect Passcode Entered The unlock code entered by the user is incorrect • Input the correct four digit code to unlock the channel. • Reset lock code to default following instructions on page 19
Page 22 of 33 Operation Instruction Manual SA102 10. USB Plug the USB to the connector, the USB icon will have color. Touch the USB icon to enter the USB playback mode. The Head unit default to play the Audio in the USB driver. Press to go to the next fold e r. Press to search Audio, Video or Picture files. Press to go to the previous folder. Short press it to skip to the previous track, long press it to fast reverse. Pause/Play button. Short press it to skip to the next track, long press it to fast forward. Repeat Play Press it to select Repeat All, Repeat One or Repeat Directory. Press it to turn on/off random play. Press it to select the Audio setting or set the prefer EQ of each band in Custom mode Audio, Video, Picture play back SA102 is default audio play back, it also support to play picture and video. If there is other multimedia files in the USB, touch to browse the folder and file list of the USB driver. Select the multimedia type Select Audio or Music files Select Movie or Video files. Select Picture files Return to playing pervious file Touch the corresponding icon to select different type of multimedia file list will be shown. Select the file to play.
Page 23 of 33 Operation Instruction Manual SA102 Picture and Video Playback Touch it to return to the file list Repeat Play, touch to select repeat play once, directory or all Touch to rotate the picture anti-clockwise for 90 degree (for picture playback) Touch to rotate the picture clockwise for 90 degree (for picture playback) Touch to set the video Brightness, Contrast and Color (for video playback)
Page 24 of 33 Operation Instruction Manual SA102 11. Bluetooth Audio Touch the BT Audio icon to enter Bluetooth Audio playing mode. If the Bluetooth is connected, the music will be playing as following shown. If the Bluetooth is not connected, press Reconnect to connect the paired phone or Pairing to pair the new device. Bluetooth Pairing Press Pairing the Pairing Mode screen will be shown as below Turn on the Bluetooth of the Mobile phone/Bluetooth device, you can see the SA102. Select the SA102 for pairing and connection
Page 25 of 33 Operation Instruction Manual SA102 Bluetooth Audio Playback Press it to skip to the next folder. Press it to open the music file list or folder (support iPhone). Press it to skip to the previous folder. Short press it to skip to the previous track. Pause/Play button. Short press it to skip to the next track. Repeat, press for select between Repeat All, Repeat One or Repeat Directory Press it to turn on/off random play. Press it to turn on/off the Audio Settings menu to adjust the EQ. Setting the Bluetooth input level
Page 26 of 33 Operation Instruction Manual SA102 12. Phone Touch the Phone icon in main menu to go to Phone mode. After the phone connected with the Head Unit via Bluetooth (HFP), user can through the Head unit to make a phone call. Please note it needs to connect the microphone for phone call. Dial Pad, tap Dial pad button to enter call mode Call logs, to show the call record, missed, received and dialed calls Contacts, to show the phonebook connected phone BT Setup, to set auto answer Make a Call or Accept the Incoming Call Backspace, to clear the pervious dial digit Dial a Call 1. Touch the icon to the above screen will appear. 2. Using the keypad, touch 0-9,*, #, to enter the phone number you wish to dial. If you enter an incorrect number, touch the icon on the keypad to delete the incorrect number. 3. Once the correct number appears on the screen, touch the icon. To go back dialing interface, touch the return icon at the upper right corner of the screen. 4. To end the call, touch the on the screen
Page 27 of 33 Operation Instruction Manual SA102 Receive an incoming Call If the Phone is connect with the unit via Bluetooth, when an incoming call, the below screen will be shown Press to receive the Call or to hang the call Interchange between phone and head unit ON/OFF the Microphone function Display the Dial Pad Call Logs Touch the icon to display the Call Combined list. Slide the bar at right side up and down to display a Call logs up to 20 records.
Page 28 of 33 Operation Instruction Manual SA102 Contacts Touch the icon to access the phone book of the connected phone. To make a call from the phone book, simply touch the contact name. BT Setup Auto Answer On/Off
Page 29 of 33 Operation Instruction Manual SA102 13. AUX IN The Audio/Video source with RCA cable can through the Head unit to play the Audio/Video. Plug the RCA to the corresponding A/V socket. Touch the to pop up the function bars and touch to view the playing Audio/Video. The Audio and Video will via the RCA cable to the Head unit If there is no Video signal the below screen will be shown
Page 30 of 33 Operation Instruction Manual SA102 14. Rear Camera There is a RCA socket for the Rear camera video signal to display on the Head unit. The Reverse wire in High level (+12V) is reverse; low level (ground or NC) is normal User also can touch the to pop up the function bars and touch to view the Rear camera. Rear Camera Settings menu Rear Camera Input: On/Off Rear Camera view: Normal/ Reverse Parking Assist Guide: On/Off Parking Assist Guide Adjust Touch the ˂/˃/˄/˅ buton to adjust the assist line to guide the car position
Page 31 of 33 Operation Instruction Manual SA102 15. Remote Control 1. Power/Mute Long press it to power off/short press to active the mute. 2. Call Entry to phone call screen. 3. Answer BT phone is connected, press it to accept call. 4. Hang up BT phone is connected, press it to end call. 5. PLAY/PAUSE Play/Pause button 6. SEEK+/-/ / In Radio mode, short press for previous /next preset channel, long press for SEEK-/+. In SiriusXM mode, short press for previous /next preset channel, long press to browse the channel up/down. In USB/BT mode, short press for previous/ next track, long press for fast reserve/ forward. 7. Home Short press to Return back to head unit home from any mode. 8. Up/down/Left/right In the radio mode, press Up/down to select a preset station up/down. Press left /right to seek - / seek +, Long press left / right for tune- / tune +. In the USB mode, press Up/down to select folder up/down. 9. ENTER/MENU In disc mode, press it to confirm selection or enter setting for DVD menu. 10. USB Press it to select the USB mode if there is a USB device in the unit. 11. VOL- Press for decrement the volume step, long press for volume rapid down. 12. Radio Press it to select the Radio mode. 13. Phone Press it to select the BT Phone mode. 14. SiriusXM Press it to select the SiriusXM mode if the unit is connected with a SiriusXM tuner. 15. USB Press it to select the USB mode if there is a USB device in the unit. 16. VOL- Press for decrement the volume step, long press for volume rapid down. 17. Radio Press it to select the Radio mode. 18. Phone Press it to select the BT Phone mode. 19. SiriusXM Press it to select the SiriusXM mode if the unit is connected with a SiriusXM tuner. 20. Disc Invalidation operation. 21. EJECT Press it to eject the disc, Press it to again to insert the disc. 22. Numeric Key In Radio and SiriusXM mode, 1 to 6 can use to select the preset channel. In BT Phone mode, the numeric key can act for number dialing.
Page 32 of 33 Operation Instruction Manual SA102 16. Specification General Power Supply ………………………….………………………………….……..…………. DC10~16Volts Grounding System …………………………………..……..……….………..…….. Negative Ground Current Drain ………………………………….…………………………...……..….…………. 15A(Max.) Power Output ………………………………………….………………..……. 4×40W/channel(Max.) Speaker Impedance ……………………………………....…..……………. 4~8ohms per channel Frequency Response……………………………………..……….………………………. 20Hz~20KHz Operating Temperature …………………………………..……………….................. -20~+60℃ Dimensions …………………………………….……..…… 175mm(W)×155mm(D)×100mm(H) TFT Display TFT Screen size…………………………………………..……………………….…………………..6.75inch Resolution………………………………………………………………..…..……………..800×480 pixels FM Radio Frequency Range (USA) ………………………………………………...……..……87.5~107.9MHz Frequency Range (Europe/South America) …………………...…..…..……87.5~108MHz Usable Sensitivity (S/N=30dB)………..…………………………….…..…….…….…….…≦15dB S/N Ratio……………………………………………………………………..….....…………………≧55dB Stereo Separation………………………………………...…..…………………..………………≧30dB AM/MW Frequency Range (USA) ………………………………………….…………..…….…530~1710KHz Frequency Range (Europe) ………………………..………………..…..………….531~1602KHz Usable Sensitivity(S/N=20dB)……………….……………………………..……….…….…≦40dB S/N Ratio………………………………………………………………………….…..………………≧45dB USB S/N Ratio……………………………………………………….………………………..……………≧60dB Channel Separation ……………………………….…………………………..……..……>50dB Line-Out/Subwoofer Output Maximum Output Level (10K ohms load)……………….……………..……..….…≧4Vrms Subwoofer Time Align……………………………………………………………….…………0~18ms
Page 33 of 33 Operation Instruction Manual SA102 FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help.

Navigation menu