Southco 02102 RF KEYFOB TRANSMITTER User Manual J EA R02 M revB
Southco,. Inc RF KEYFOB TRANSMITTER J EA R02 M revB
Southco >
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1306831 |
| Application ID | BOJRXOwzTUCHbGGn8MkC2w== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 7.24kB (90496 bits) |
| Date Submitted | 2010-07-06 00:00:00 |
| Date Available | 2010-08-20 00:00:00 |
| Creation Date | 2010-07-05 15:58:30 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2010-07-05 15:58:40 |
| Document Title | Microsoft Word - J-EA-R02-M_revB.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | alex_hsieh |
EA-R02 RF Controller Kit Operating Instructions Package Contents • • • EA-R02-102 Transmitter Keyfob (qty 2) EA-R02-202 Receiver Unit Wire Harness Pulsing Auxiliary Output Press the transmitter’s LOCK and UNLOCK buttons at the same time. The transmitter LED will turn on and the auxiliary output will pulse five times, as shown in the figure below: Transmitter Transmitter Battery Replacement Replace the transmitter battery with two Type CR2016 3VDC batteries. The batteries can be replaced by opening the transmitter enclosure. Wire Harness Fuse Replacement Replace with 15A automotive blade fuse only. Specifications Receiver Power: 12VDC (±10%) Receiver Idle Current: 10mA (maximum), no attached devices Receiver Operating Current: 1A (maximum), no attached devices Receiver Outputs: three Form C relays, rated 15A at 14VDC Operating Range: up to 60 feet (open air) Operating Frequency: 433.92MHz Coding Type: Fixed Code Transmitter Power: Type CR2016 3VDC battery (qty 2 per transmitter) Receiver Unit Mounting and Wiring The receiver should be mounted in a location to minimize RF shielding. Two mounting screw bosses are provided to mount the receiver. (7) (1) (2) FUSE (4) (3) Normal Use (5) The keyfob transmitter can be used to lock and unlock the system. (6) Unlocking the System Press the transmitter’s UNLOCK button. The transmitter LED will turn on and the system will unlock and the auxiliary output will pulse twice, as shown in the figure below: Locking the System Press the transmitter’s LOCK button. The transmitter LED will turn on and the system will lock and the auxiliary output will pulse once, as shown in the figure below: Wire Wire Color Red Black Black Yellow Blue Green Black Description Power Supply Input (12VDC) Ground Ground (for use with auxiliary output) Auxiliary Output Lock Actuator Output (connect to actuator blue wire) Unlock Actuator Output (connect to actuator green wire) Antenna (do not connect) This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: 1. 2. this device may not cause harmful interference and this device must accept any interference received, including interference that may cause undesired operation of the device. For technical support of this product contact: info@southco.com or visit: www.southco.com. J-EA-R02-M_revB Page 1 of 1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2010:07:05 15:58:30+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2010:07:05 15:58:40+08:00 Metadata Date : 2010:07:05 15:58:40+08:00 Format : application/pdf Title : Microsoft Word - J-EA-R02-M_revB.doc Creator : alex_hsieh Document ID : uuid:e74c7c6e-29f0-49a7-a911-83b579b8634c Instance ID : uuid:dc0a09a9-c8a1-4350-bf1e-a498015d3a89 Page Count : 1 Author : alex_hsiehEXIF Metadata provided by EXIF.tools