Southco 03103 WIRELESS RF KEYPAD User Manual J EA R03 M revB

Download:
Mirror Download [FCC.gov]
Document ID	1306864
Application ID	ezzQskNWReHOWKIpiA3UIQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.64kB (82963 bits)
Date Submitted	2010-07-06 00:00:00
Date Available	2010-08-20 00:00:00
Creation Date	2010-07-05 14:29:32
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2010-07-05 14:29:32
Document Title	Microsoft Word - J-EA-R03-M_revB.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	alex_hsieh

EA-R03 Wireless Keypad Kit
Operating Instructions
EA-R03 Wireless Keypad Kit
1.
2.
1·2
3·4
5·6
7 ·8
9·0
3.
4.
Package Contents
•
•
•
•
EA-R03-103 Wireless Keypad Transmitter
EA-R02-202 Receiver Unit
Wire Harness
Keypad Mounting Hardware
5.
Press the 9·0 button for approximately 3 seconds. Keypad lights
should flash twice then stay on.
Enter the current user code. When entering the last digit of the
current user code, hold the button for approximately 2 seconds.
Keypad lights should flash once then stay on.
Enter the new user code. When entering the last digit of the new
user code, hold the button for approximately 2 seconds. Keypad
lights should flash once then stay on.
Repeat the new user code. When entering the last digit of the
new user code, hold the button for approximately 2 seconds.
Keypad lights should flash once then turn off. The user code has
been successfully changed.
If the keypad lights turn off during Steps 1-4, then programming has been
timed out and the process needs to be repeated from Step 1.
Specifications
Receiver Power:
12VDC (±10%)
Receiver Idle Current:
10mA (maximum), no attached devices
Receiver Operating Current: 1A (maximum), no attached devices
Receiver Outputs:
three Form C relays, rated 15A at 14VDC
Operating Range:
up to 60 feet (open air)
Operating Frequency:
433.92MHz
Coding Type:
Fixed Code
Transmitter Power:
Type CR2032 3VDC battery
Normal Use
NOTE: If the user code is lost or forgotten, contact Southco for
assistance.
Transmitter Battery Replacement
Replace the transmitter battery with a Type CR2032 3VDC battery. The
battery can be replaced by opening the enclosure.
Wire Harness Fuse Replacement
Replace with 15A automotive blade fuse only.
The wireless keypad transmitter can be used to lock and unlock the system. Receiver Unit Mounting and Wiring
Unlocking the System
The receiver should be mounted in a location to minimize RF shielding.
Two mounting screw bosses are provided to mount the receiver.
Enter the user code, then press the 1·2 button. The system will unlock and
the auxiliary output will pulse twice, as shown in the figure below:
(7)
(1)
(2)
FUSE
(4)
(3)
(5)
Locking the System
(6)
Enter the user code, then press the 3·4 button. The system will lock and
the auxiliary output will pulse once, as shown in the figure below:
Pulsing Auxiliary Output
Enter the user code, then press the 5·6 button. The auxiliary output will
pulse five times, as shown in the figure below:
Wire
Wire Color
Red
Black
Black
Yellow
Blue
Green
Black
Description
Power Supply Input (12VDC)
Ground
Ground (for use with auxiliary output)
Auxiliary Output
Lock Actuator Output (connect to actuator blue
wire)
Unlock Actuator Output (connect to actuator green
wire)
Antenna (do not connect)
This device complies with Part 15 of the FCC Rules.Operation is subject to
the following two conditions:
Changing the User Code
The unit is shipped with a default user code of 1234, but can be changed
to a 3-7 digit number. To change the user code:
J-EA-R03-M_revB
1.
2.
this device may not cause harmful interference and
this device must accept any interference received, including
interference that may cause undesired operation of the device.
For technical support of this product contact: info@southco.com
or visit: www.southco.com.
Page 1 of 1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2010:07:05 14:29:32+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2010:07:05 14:29:32+08:00
Format                          : application/pdf
Title                           : Microsoft Word - J-EA-R03-M_revB.doc
Creator                         : alex_hsieh
Document ID                     : uuid:d1eed7a5-60df-40b0-8eea-669283607492
Instance ID                     : uuid:f4e5444c-2916-4dd5-8e60-2ea75fdd795d
Page Count                      : 1
Author                          : alex_hsieh

EXIF Metadata provided by EXIF.tools