Spacelabs Healthcare WMIA198N 802.11abgn Mini PCI module User Manual PRODUCT SPECIFICATION

Spacelabs Healthcare, Inc. 802.11abgn Mini PCI module PRODUCT SPECIFICATION

Users Manual

802.11a/b/g/n Mini PCI Module WMIA-198Nv2 1 UUsseerr mmaannuuaall 880022..1111aa//bb//gg//nn mmiinnii--PPCCII MMoodduullee WWMMIIAA--119988NNvv22 ((AAtthheerrooss AARR99222200)) Version:0.90
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 2 Revised History Version Purpose Date Editor 0.90 Initial Doc 2010/12/10 Jane Jian
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 3 TABLE OF Contents 1.PRODUCT FEATURES .......................................................................................................... 4 2. PRODUCT SPECIFICATION ................................................................................................ 4 2.1 MAIN CHIPSET ................................................................................................................... 4 2.2 FUNCTION SPECIFICATION .................................................................................................. 4 2.3 BLOCK DIAGRAM ................................................................................................................ 6 2.4 MECHANICAL DRAWING ...................................................................................................... 7 2.5 TRANSMIT POWER & RECEIVE SENSITIVITY ......................................................................... 8 3. EEPROM INFORMATION ..................................................................................................... 9 4. ENVIRONMENTAL ................................................................................................................ 9 4.1 OPERATION ....................................................................................................................... 9 4.2 STORAGE .......................................................................................................................... 9 4.3 OPERATION POWER ............................................................................................................ 9
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 4 1.Product Features  Atheros AR9220  2 antennas to support 2T2R  WEP, WPA, WPA2  Driver Support: Linux2.6 above 2. Product Specification 2.1 Main Chipset MAC/BB/RF: Atheros AR9220 2.2 Function Specification Interface 32-bit mini-PCI Type III A, LEDs NA Antenna 2x UFL antenna connectors, 2T2R Input Power DC 3.3V  0.1V Data Rate 802.11b: 11, 5.5, 2, 1 Mbps; 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: Up to 300Mbps
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 5 Operating Frequency 2.412GHz~ 2.472GHz ISM Band (Subject to Local Regulations) 5.18GHz ~ 5.825GHz(Subject to Local Regulations) Transmit Output Power (Tolerance: ±1.5dBm) 802.11b: 16dBm 802.11g: 17dBm 802.11gn: 2.4G: 18dBm (HT20)@2Tx 16dBm (HT40)@2Tx 802.11a: 15dBm 802.11an: 5G: 13dBm (HT20)@2Tx 11dBm (HT40)@2Tx Receive Sensitivity (Tolerance: ±2dBm) 802.11b: 8%PER -91dBm @11Mbps 802.11g: 10% PER -77dBm @54Mbps 802.11gn: 2.4GHz 10%PER -74dBm@MCS7,HT20 -73dBm@MCS7,HT40 802.11a: 10% PER -76dBm @54Mbps 802.11an: 5GHz 10%PER -73dBm@MCS7,HT20 -69dBm@MCS7,HT40 Power consumption Tx Mode:(Continue) 800 mA  100mA Rx Mode : (Continue) 300mA  50mA Standby Mode: TBD Security WEP, WPA, WPA2 Driver Linux2.6 above
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 6 2.3 Block Diagram
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 7 2.4 Mechanical Drawing Dimension: 58.5x51x3.3mm (± 0.15mm) Weight: 10g
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 8 2.5 Transmit Power & Receive Sensitivity Data rate Tx Output Power (±1.5dBm) Receive Sensitivity (±2dBm) 802.11n, 2.4GHz HT20 MCS0 20dBm -92dBm MCS1 20dBm -91dBm MCS2 20dBm -89dBm MCS3 20dBm -85dBm MCS4 20dBm -82dBm MCS5 20dBm -80dBm MCS6 19dBm -78dBm MCS7 18dBm -74dBm 802.11n, 2.4GHz HT40, @2Tx MCS0 20dBm -91dBm MCS1 20dBm -88dBm MCS2 20dBm -87dBm MCS3 20dBm -84dBm MCS4 19dBm -81dBm MCS5 18dBm -78dBm MCS6 17dBm -77dBm MCS7 16dBm -73dBm 802.11n, 5GHz HT20, @2Tx MCS0 19dBm -91dBm MCS1 19dBm -89dBm MCS2 19dBm -87dBm MCS3 19dBm -83dBm MCS4 18dBm -80dBm MCS5 18dBm -76dBm MCS6 17dBm -75dBm MCS7 13dBm -73dBm 802.11n, 5GHz HT40, @2Tx MCS0 18dBm -88dBm MCS1 18dBm -86dBm MCS2 18dBm -84dBm MCS3 18dBm -81dBm MCS4 17dBm -78dBm MCS5 17dBm -73dBm MCS6 15dBm -72dBm MCS7 11dBm -69dBm 802.11a, 5GHz 6Mbps 17dBm -91dBm 9Mbps 17dBm -91dBm 12Mbps 17dBm -90dBm 18Mbps 17dBm -88dBm 24Mbps 17dBm -84dBm 36Mbps 17dBm -81dBm 48Mbps 15dBm -77dBm 54Mbps 15dBm -76dBm 802.11g, 2.4GHz 6Mbps 20dBm -93dBm 9Mbps 20dBm -92dBm 12Mbps 20dBm -91dBm 18Mbps 20dBm -89dBm 24Mbps 20dBm -87dBm 36Mbps 20dBm -83dBm 48Mbps 19dBm -79dBm 54Mbps 17dBm -77dBm 802.11b , 2.4GHz 1 ~ 11Mbps 16 ~ 18dBm
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 9 3. EEPROM Information Reg Domain ETSI1_WORLD Reg Domain Code 0x37 Device ID TBD Vendor ID TBD 4. Environmental 4.1 Operation Operating Temperature: 0 ~ +60℃ Relative Humidity: 15% ~ 95% (non-condensing) 4.2 Storage Temperature: -20 ~ +80 C 4.3 Operation power DC 3.3V  0.1V Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 10 interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: The product comply with the US portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 11 (When the device is indoor use, below sentence add) Operation of this device is restricted to indoor use only
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 12 This device is intended only for OEM integrators under the following conditions: 1) The transmitter module may not be co-located with any other transmitter or antenna, 2) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: “Contains FCC ID: CM6-WMIA198N”. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.

Navigation menu