Spacelabs Healthcare WMIA198N 802.11abgn Mini PCI module User Manual PRODUCT SPECIFICATION
Spacelabs Healthcare, Inc. 802.11abgn Mini PCI module PRODUCT SPECIFICATION
Users Manual
802.11a/b/g/n Mini PCI Module WMIA-198Nv2 User manual 802.11a/b/g/n mini-PCI Module WMIA-198Nv2 (Atheros AR9220) Version:0.90 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 Revised History Version 0.90 Purpose Initial Doc Date Editor 2010/12/10 Jane Jian 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 TABLE OF Contents 1.PRODUCT FEATURES .......................................................................................................... 4 2. PRODUCT SPECIFICATION ................................................................................................ 4 2.1 MAIN CHIPSET ................................................................................................................... 4 2.2 FUNCTION SPECIFICATION .................................................................................................. 4 2.3 BLOCK DIAGRAM................................................................................................................ 6 2.4 MECHANICAL DRAWING ...................................................................................................... 7 2.5 TRANSMIT POWER & RECEIVE SENSITIVITY ......................................................................... 8 3. EEPROM INFORMATION ..................................................................................................... 9 4. ENVIRONMENTAL ................................................................................................................ 9 4.1 OPERATION ....................................................................................................................... 9 4.2 STORAGE .......................................................................................................................... 9 4.3 OPERATION POWER............................................................................................................ 9 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 1.Product Features Atheros AR9220 2 antennas to support 2T2R WEP, WPA, WPA2 Driver Support: Linux2.6 above 2. Product Specification 2.1 Main Chipset MAC/BB/RF: Atheros AR9220 2.2 Function Specification Interface 32-bit mini-PCI Type III A, LEDs NA Antenna 2x UFL antenna connectors, 2T2R Input Power DC 3.3V 0.1V 802.11b: 11, 5.5, 2, 1 Mbps; 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: Up to 300Mbps Data Rate 802.11a/b/g/n Mini PCI Module Operating Frequency Transmit Output Power (Tolerance: ±1.5dBm) Receive Sensitivity (Tolerance: ±2dBm) Power consumption Security Driver WMIA-198Nv2 2.412GHz~ 2.472GHz ISM Band (Subject to Local Regulations) 5.18GHz ~ 5.825GHz(Subject to Local Regulations) 802.11gn: 2.4G: 18dBm (HT20)@2Tx 802.11g: 17dBm 16dBm (HT40)@2Tx 802.11b: 16dBm 802.11an: 5G: 13dBm (HT20)@2Tx 802.11a: 15dBm 11dBm (HT40)@2Tx 802.11b: 8%PER 802.11g: 10% PER 802.11gn: 2.4GHz 10%PER -91dBm @11Mbps -77dBm @54Mbps -74dBm@MCS7,HT20 -73dBm@MCS7,HT40 802.11a: 10% PER 802.11an: 5GHz 10%PER -76dBm @54Mbps -73dBm@MCS7,HT20 -69dBm@MCS7,HT40 Tx Mode:(Continue) Rx Mode : (Continue) Standby Mode: TBD 800 mA 100mA 300mA 50mA WEP, WPA, WPA2 Linux2.6 above 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 2.3 Block Diagram 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 2.4 Mechanical Drawing Dimension: 58.5x51x3.3mm (± 0.15mm) Weight: 10g 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 2.5 Transmit Power & Receive Sensitivity Data rate 802.11n, 2.4GHz HT20 802.11n, 2.4GHz HT40, @2Tx 802.11n, 5GHz HT20, @2Tx 802.11n, 5GHz HT40, @2Tx 802.11a, 5GHz 802.11g, 2.4GHz 802.11b , 2.4GHz MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps 1 ~ 11Mbps Tx Output Power (±1.5dBm) 20dBm 20dBm 20dBm 20dBm 20dBm 20dBm 19dBm 18dBm 20dBm 20dBm 20dBm 20dBm 19dBm 18dBm 17dBm 16dBm 19dBm 19dBm 19dBm 19dBm 18dBm 18dBm 17dBm 13dBm 18dBm 18dBm 18dBm 18dBm 17dBm 17dBm 15dBm 11dBm 17dBm 17dBm 17dBm 17dBm 17dBm 17dBm 15dBm 15dBm 20dBm 20dBm 20dBm 20dBm 20dBm 20dBm 19dBm 17dBm 16 ~ 18dBm Receive Sensitivity (±2dBm) -92dBm -91dBm -89dBm -85dBm -82dBm -80dBm -78dBm -74dBm -91dBm -88dBm -87dBm -84dBm -81dBm -78dBm -77dBm -73dBm -91dBm -89dBm -87dBm -83dBm -80dBm -76dBm -75dBm -73dBm -88dBm -86dBm -84dBm -81dBm -78dBm -73dBm -72dBm -69dBm -91dBm -91dBm -90dBm -88dBm -84dBm -81dBm -77dBm -76dBm -93dBm -92dBm -91dBm -89dBm -87dBm -83dBm -79dBm -77dBm 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 3. EEPROM Information Reg Domain ETSI1_WORLD Reg Domain Code 0x37 Device ID TBD Vendor ID TBD 4. Environmental 4.1 Operation Operating Temperature: 0 ~ +60℃ Relative Humidity: 15% ~ 95% (non-condensing) 4.2 Storage Temperature: -20 ~ +80 4.3 Operation power DC 3.3V 0.1V Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: The product comply with the US portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA 10 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 (When the device is indoor use, below sentence add) Operation of this device is restricted to indoor use only 11 802.11a/b/g/n Mini PCI Module WMIA-198Nv2 This device is intended only for OEM integrators under the following conditions: 1) The transmitter module may not be co-located with any other transmitter or antenna, 2) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: “Contains FCC ID: CM6-WMIA198N”. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Test Create Date : 2017:09:19 14:31:42+08:00 Modify Date : 2017:09:19 14:32:21+08:00 Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Format : application/pdf Creator : Test Title : PRODUCT SPECIFICATION Creator Tool : Microsoft® Word 2010 Metadata Date : 2017:09:19 14:32:21+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:75670a21-709f-415a-8258-e76a2b7d6ab6 Instance ID : uuid:4e152872-2177-471a-b5da-3b2f8954d177 Page Count : 12EXIF Metadata provided by EXIF.tools