SparkLAN Communications WMIA139AG 802.11a Wireless MiniPCI Card User Manual

Download:
Mirror Download [FCC.gov]
Document ID	543686
Application ID	kZHad34D1u0f3l8zSuET2g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.55kB (131901 bits)
Date Submitted	2005-05-19 00:00:00
Date Available	2005-05-19 00:00:00
Creation Date	2005-04-13 08:03:34
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-05-10 10:29:04
Document Title	Microsoft Word - WMIA-139AG Mini-PCI User..s Maunal-rev.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Ashely

WMIA-139AG IEEE 802.11a Mini-PCI User’s Maunal
Specification
Product Name
Model Number
Host Interface
Dimensions
Weight
Frequency Band
54 Mbps/ 11Mbps Wireless LAN MINIPCI Card
WMIA-139AG
MINIPCI
59.7x50.95x5 mm
20g
802.11a
Unlicensed National Information Infrastructure (U-NII) frequency band,
5.15GHz to 5.85GHz (subject to local regulations)
Number of Non-Overlapping 802.11a
Channels
USA and Canada-13
Europe – up to 19, subject to local regulations
Japan – 4
Operating Voltage
Modulation
3.3V ± 5%
802.11a: OFDM;
Data Rate
802.11a
54, 48, 36,24,18,12, 9, 6 Mbps per channel, auto fallback for extended
range; (option : Enhanced proprietary Turbo Mode up to 108 Mbps)
Security
802.11a
64/128/152-bit WEP Encryption, AES
Antenna Interface
Transmitted power
Receive Sensitivity
UFL-CON
802.11a
please see the output power table for detail.
802.11a
Nominal Temp Range:
- 6Mbps
10-5 BER @ -90dBm, typical
- 9Mbps
10-5 BER @ -89dBm, typical
- 12Mbps
10-5 BER @ -88dBm, typical
- 18Mbps
10-5 BER @ -87dBm, typical
- 24Mbps
10-5 BER @ -83dBm, typical
- 36Mbps
10-5 BER @ -80dBm, typical
- 48Mbps
10-5 BER @ -74dBm, typical
- 54Mbps
10-5 BER @ -70dBm, typical
802.11a
Max.2W
Continue Tx : 560 mA @ 3.3V
Continue RX : 350 mA @3.3V
Supplied Driver
Windows 98SE/ME/NT4.0/2000/XP
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.11a,
draft standard ,Wi-Fi compliant
Warranty
Temperature Range
Operating Range
Network Protocol
Management Utility
EMC certification
System Requirements
1 year
0 ~ 50°C (Operating); -20 ~ 85°C (Storing)
Operating Humidity 10% to 85% Non-Condensing
Storage Humidity 5% to 90% Non-Condensing
Open Space: Up to 260 m: Indoor: 100 m
The transmission speed varies in the surrounding environment
TCP/IP, IPX, NDIS4, and NDIS5 ,NDIS 5.1
Monitor Internet Access Status via UI
TBD(FCC part 15C/15.247; ETS 300 328-2; UL; IEC60950; EN
301 489-1,17; prEN50371; CE Mark; TELEC)
Laptop PC containing
Æ MINIPCI local bus slot
Æ 64MB memory or greater
Æ 300MHz processor or greater
Microsoft Windows 98 Second Edition/Millennium Edition/2000/NT 4.0
with Service Pack 6,Windows XP
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Statement Needed to be Shown on End Product
Since this module is installed inside the end product, the end product should be
affixed a label on visible area showing that this product contain a RF module, and
also its FCC ID.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the users manual of the end
product which integrate this module.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as the 2 conditions above are met, further transmitter testing will not be required. However,
the OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed ( for example, LCD TV, AP, Router )
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID can not be used on the final product. In these circumstances, the
OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and
Obtaining a separate FCC authorization.
End Product Labelling
This transmitter module is authorized only for use in devices where the antenna may be installed such
that 20 cm may be maintained between the antenna and users ( for example: LCD TV, AP, Router )
The final end product must be labeled in a visible area with the following:
“ Contains TX FCC ID: RYK-WMIA139AG ”.
Manual Information That Must be Included
The users manual for end users must include the following information in a prominent location “
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for
this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or transmitter.”
For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2005:04:13 08:03:34Z
Modify Date                     : 2005:05:10 10:29:04+08:00
Page Count                      : 4
Creation Date                   : 2005:04:13 08:03:34Z
Mod Date                        : 2005:05:10 10:29:04+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Ashely
Metadata Date                   : 2005:05:10 10:29:04+08:00
Creator                         : Ashely
Title                           : Microsoft Word - WMIA-139AG Mini-PCI User..s Maunal-rev.doc
Has XFA                         : No

EXIF Metadata provided by EXIF.tools