SparkLAN Communications WMIR268GN 802.11bgn Mini PCI Module User Manual WMIR 268GN v1
SparkLAN Communications, Inc. 802.11bgn Mini PCI Module WMIR 268GN v1
user manual
WMIR-268GN ■ Chipset: Ralink RT2880 + RT2820 ■ Host Interface: Mini PCI Type IIIA with MII ■ Antenna: 2 antennas to support 2T2R ■ Output Power up to 18dBm ■ Enhanced wireless security: 64/128-bits WEP, WPA, WPA2 ■ Linux Application ■ Networking Equipment ■ Industrial Computers ■ Automation ■ Medical Device ■ POS (Point-of-Sale) System ■ Self-Service KIOSK ■ Gaming Machine -------------------------------------------------------------------------------------------- Feature 802.11GN Single-Band Mini PCI Module Ralink RT2880 (MIPS CPU) + RT2820 Solution with MII Interface, 2T3R Wider Coverage by MIMO 2T2R Technology The SparkLAN WMIR-268GN incorporates the latest MIMO 2T2R technology for stable networking; it supports up to 300Mbps downstream and 300Mbps upstream rates, which is an ideal choice of integrating with high performance AP or networking equipment. Enterprise level security With advanced security encryptions, such as 64/128-bits WEP, WPA, WPA2, the SparkLAN WMIR-268GN helps creating a secure and reliable wireless network. This device is the best choice for you to quickly and easily integrate with your wireless enabled applications. Mechanical Dimension (mm) www.sparklan.com / sales@sparklan.com / +886-2-2659-1880 WMIR-268GN ■ WMIR-278GN 802.11b/g/n Mini PCI Module Ordering Info ■ WMIR-268GN 802.11b/g/n Mini PCI Module -------------------------------------------------------------------------------------------- Related Product Specifications Standard 802.11b/g/n Chipset CPU/Mac/BB RT2880 (MIPS CPU) + RT2820 Host Interface Mini PCI, Type IIIA Radio Antenna 2 x U.FL connectors, 2T2R Operating Frequency 802.11b/g/n ISM Band: 2.400 ~ 2.4835GHz Modulation Peak Output Power Receive Sensitivity 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11b : 23.45dBm@11Mbps 802.11g : 24.58dBm@54Mbps 802.11n HT20 : 27.72dBm@MCS8 802.11n HT40 : 25.70dBm @MCS8 802.11b : -87dBm ± 2dBm @11Mbps 802.11g : -76dBm ± 2dBm @ 54Mbps 802.11n HT20 : -75dBm ± 2dBm @ MCS7 802.11n HT40 : -72dBm ± 2dBm @ MCS7 Power consumption Continue TX Max 836mA Continue RX Max 691mA Operating Voltage DC 3.3V ± 10% Environmental Temperature Range Application Humidity (Non-Condensing) 0 ~ 50°C (Operating) -20 ~ 80°C (Storing) 5 ~ 90% (Operating) 5 ~ 95% (Storing) Physical Specification Dimensions 59.6mm x 44.60mm x 3.5mm (±0.5mm) Weight 7g Software Driver Security Linux 64/128-bits WEP, WPA, WPA2 www.sparklan.com / sales@sparklan.com / +886-2-2659-1880 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. The final end product must be labeled in a visible area with the following " Contains TX FCC ID: RYK-WMIR268GN". WMIR-268GN Mini PCI Module Quick Installiaton Guide Version 1.0 Setup 1. Find out the Driver, and setup RT2880_MII_ATE_UI.exe Setup 2. Choose Ethernet Card Setup 3. Select “Throughtput Test” tab, and enter [SSID], press Set, then press OK Setup 4. Ping ipconfig to see if the module is functioning Antenna Info. Ant. No. Category Type External GSM&WIFI Antenna Model EPH-501 Connector Type FAKRA SMB CRIMB JACK Gain (dBi) -1.14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : jane Create Date : 2012:03:29 10:59:56+08:00 Modify Date : 2012:03:29 10:59:56+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2012:03:29 10:59:56+08:00 Creator Tool : Adobe Acrobat Pro 9.2.0 Format : application/pdf Title : WMIR-268GN_v1 Creator : jane Document ID : uuid:fdbaced1-bb90-4aff-8a09-bebeabc993b3 Instance ID : uuid:a0484c47-b5aa-4036-b6de-443bcf29bc1d Producer : Adobe Acrobat Pro 9.2.0 Page Count : 8EXIF Metadata provided by EXIF.tools