SparkLAN Communications WSDB104GNIBT 802.11b/g/n WiFi+BT IOT Module User Manual 20180101 v1 8 Rev 1
SparkLAN Communications, Inc. 802.11b/g/n WiFi+BT IOT Module 20180101 v1 8 Rev 1
Contents
- 1. 15_WSDB-104GNI(BT) UserMan
- 2. User Manual_20180101_v1 - 8. User Manual Rev.1
User Manual_20180101_v1 - 8. User Manual Rev.1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3703707 |
| Application ID | vlItIpxyMZOuUDq2yQuNig== |
| Document Description | User Manual_20180101_v1 - 8. User Manual Rev.1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 24.75kB (309429 bits) |
| Date Submitted | 2018-01-05 00:00:00 |
| Date Available | 2018-01-05 00:00:00 |
| Creation Date | 2017-12-18 14:52:08 |
| Producing Software | Acrobat Distiller 9.3.3 (Windows) |
| Document Lastmod | 2017-12-18 14:52:08 |
| Document Title | Microsoft Word - WSDB-104GNI(BT) user manual(20171128).docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | 45610 |
PRODUCT T APPROVA AL SHEET –WSDB-104G GNI(BT) [W W] 1 PRODUC CT INT TRODU UCTION Standa ard IEEE802.1 11b/g/n, Blue etooth V4.1, V3.0+HS, V22.1+EDR Chipse et Broadcom BCM43438 Antenn na Type / con n. 1 x U.FL cconnector (1T T1R), Interfacces Form F Factor SDIO 2.0: WLAN, High Spee ed UART: Blu uetooth Stamp Holle WiFi: 1, 5.5, 2, 1M Mbps; 802.11b:11 Data R Rate 802.11g:54 4, 48, 36, 24 4, 18, 12, 9, 6Mbps 802.11n:M MCS 0 to 7 BT: 1~ 3M Mbps WiFi: Spread ding /Modula ation Techniiques 802.11b: D DSSS (DBPS SK, DQPSK, CCK) 802.11g: O OFDM (BPSK K,QPSK,16-Q QAM,64-QAM M) 802.11n: O OFDM (BPSK K,QPSK,16-Q QAM,64-QAM M) BT: 8DPSK K, π/4 DQPS SK, GFSKFS SK Freque ency Range b/g/n ISM Band: 2.400~2.4835GHz Operatting Voltage DC 1.8 or DC 3.3V Power Consumptio on Wi-Fi TX M Mode: 280mA Wi-Fi RX M Mode: 60mA Tempe erature Rang ge -40~85°C (Operating) / -50~90°C (Storing) Humidity (non-cond densing) 5% ~ 90% (Operating) / 0% ~ 95% (Storing) Securitty WEP, WPA A, WPA2, OS sup pported Linux PRODUCT T APPROVA AL SHEET –WSDB-104G GNI(BT) [W W] 2. HA ARDW WARE SPECI FICAT TION 2.1 Ha ardware e Dimension Dimensio on(L x W x H): 19 mm X 12 1 mm x 2 m mm PRODUCT T APPROVA AL SHEET –WSDB-104G GNI(BT) [W W] el Compliance Statement: FCC Labe This devicce complies with w part 15 of o the FCC R Rules. Opera ation is subject to the folloowing two co onditions: (1) This de evice may no ot cause harm mful interfere ence, and (2) This de evice must accept any intterference re eceived, inclu uding interference that m may cause un ndesired operation. FEDERAL L COMMUNICATIONS COMMISSION INTERFER RENCE STA ATEMENT: This equip pment has be een tested an nd found to ccomply with the t limits for a Class B diigital device, pursuant to part 15 of the FCC C Rules. The ese limits are e designed to o provide rea asonable prottection againnst harmful in nterference in na residentiall installation. This equip pment genera ates, uses an nd can radiatte radio frequency energy and, if not installed and d used in acccordance with the instructions, may m cause ha armful interfe erence to rad dio communications. How wever, there is no guaran ntee that interferencce will not occcur in a partticular installa ation. If this equipment does cause h armful interference to rad dio or television reception, which can be determined b by turning th he equipmentt off and on, the user is encouraged t try to to correct the e interference e by one or more of the ffollowing measures: - Reorient or relocate the t receiving g antenna. - Increase the separatiion between the equipme ent and receiver. - Connect the equipme ent into an ou utlet on a circcuit differentt from that to which the reeceiver is connected. - Consult tthe dealer orr an experien nced radio/ T TV technician n for help. Radiation Exposure Sttatement This devicce is intended d only for OE EM integratorrs under the following conditions: 1) The anttenna must be b installed such that 20 cm is mainta ained betwee en the antennna and users s, and 2) The tran nsmitter mod dule may nott be co-locate ed with any other transmitter or antennna. As long ass 2 conditionss above are met, further transmitter test will not be b required. H However, the e OEM integrator is still respon nsible for tessting their end d-product forr any additional complian nce requirem ments required with this module installed IMPORTA ANT NOTE: In the event that these e conditions can c not be m met (for exam mple certain la aptop configuurations or co-location with another tra ansmitter), th hen the FCC authorizatio on is no longe er considered valid and tthe FCC ID can c not be ussed on the final prroduct. In the ese circumsttances, the O OEM integrattor will be res sponsible forr re-evaluatin ng the end prroduct (including the transmittter) and obta aining a sepa arate FCC au uthorization. Radiation Exposure Sttatement: 1) Any cha anges or mod difications no ot expressly approved by y the grantee e of this devicce could void d the user's authority to operate e the equipme ent. 2) The pro oduct complyy with the FC CC portable R RF exposure limit set forth for an uncoontrolled env vironment an nd are safe for inttended opera ation as desc cribed in thiss manual. Th he further RF exposure reeduction can be achieved d if the product ca an be kept ass far as poss sible from the e user body or o set the dev vice to lowerr output power if such fun nction is available. End Produ uct Labeling This transmitter modulle is authoriz zed only for u use in device e where the antenna mayy be installed such that 20 0 cm may be maintained between the antenn na and users . The final en nd product must be labelled in a visible area with the following: “Contains FC CC ID: RYK--WSDB104G GNIBT”. The grantee's FC CC ID can bee used only when all FCC compliancce requirements are met. Manual Infformation To o the End User: The OEM integrator ha as to be awa are not to pro ovide informa ation to the end user regaarding how to o install or re emove this RF mo odule in the user’s manual of the end d product whiich integrates this modulee. The end user manual shall include all required regulatory in nformation/w warning as shhow in this manual. PRODUCT T APPROVA AL SHEET –WSDB-104G GNI(BT) [W W] Canada statement: Industry C This devicce complies with w RSS-247 7 of the Indu ustry Canada a Rules. Operation is subj bject to the fo ollowing two conditionss : (1) This de evice may no ot cause interference, an d (2) This de evice must ac ccept any intterference, in ncluding interferencce that may cause undes sired operatio on of the dev vice. This equip pment complies with IC ra adiation expo osure limits set s forth for an a uncontrollled environm ment. This equipmentt should be installed and operated wiith minimum distance 20c cm between the radiator and your body. Cet appare eil radio est conforme au u CNR-247 d ’Industrie Ca anada. L’utilisation de ce dispositif es st autorisée seulementt aux deux co onditions suiivantes : (1) l'apparreil ne doit pa as produire de d brouillage , et (2) l'utilisateur de l'app pareil doit acc cepter tout b brouillage radioélectrrique subi, même si le brrouillage est susceptible d'en compromettre le foncttionnement. This radio transmitter has h been approved by In ndustry Cana ada to operatte with the anntenna types s listed below w with the maxim mum permissible gain and d required an ntenna imped dance for each antenna ttype indicate ed. Antenna types not include ed in this list, having a ga ain greater th han the maxiimum gain in ndicated for tthat type, are e strictly prohibited for use with this device. Le présent émetteur ra adio a été ap pprouvé par IIndustrie Can nada pour fo onctionner avvec les types s d'antenne énumérés ci-dessous et ayant un gain admissi ble maximal et l'impédan nce requise ppour chaque type d'anten nne. Les types d'antenne no on inclus dan ns cette liste e, ou dont le gain est supé érieur au gaiin maximal in ndiqué, sont strictemen nt interdits po our l'exploitattion de l'éme etteur. Anttenna Tyype Printed Dippole Antennaa Impedancce 50 ohm 50 ohm Gain (dBi) 2.4 GHz -5.0 02 3.6 67 Compliancce with IC req quirement RSS-247 data a transmissio on is always initiated by ssoftware, whiich is then passed do own through the MAC, thrrough the digital and analog baseband, and a finally to the RF trans sceiver. Seve eral special ppackets are initiated by th he MAC. The ese are the only ways the e digital base eband portion n will turn on the RF transsmitter, which it then turn ns off at the end of the packe et. Therefore e, the transm mitter will be on o only while one of the aaforemention ned packets are being transmitted. est conforme au CNR--247 la transmission de d données est toujours initiée par le loggiciel, qui est ensuite tran nsmis à travers la a MAC, à tra avers la band de de base n numérique ett analogique et, enfin, à l''émetteur-réc cepteur RF. Plusieurs paquets spéciaux sont in nitiées par le MAC. Ce so ont les seuls moyens de lla partie bande de base numérique e se met en marche l'éme etteur RF, ce e qui lui puis s'éteint à la fin du paqueet. Par consé équent, l'éme etteur sera sur que lorsque l'un des paqu uets ci-dessu us sont transm mises. This equip pment complies with IC ra adiation expo osure limits set s forth for an a uncontrollled environm ment. The anttenna should be installed and d operated with w minimum m distance off 20 cm between the radiaator and you ur body. This transmitter must not n be co-loc cated or operrating in conjjunction with any other anntenna or tra ansmitter. Cet appare eil est conforrme aux limittes d'exposittion aux rayo onnements de la IC pour un environne ement non contrôlé. L L'antenne do oit être installé de façon à garder une distance min nimale de 200 centimètres s entre la sou urce de rayonnements et votre e corps. L'ém metteur ne do oit pas être co olocalisé ni fonctionner cconjointemen nt avec à autre antenne ou autre émettteur. PRODUCT T APPROVA AL SHEET –WSDB-104G GNI(BT) [W W] d only for OE EM integratorrs under the following conditions: This devicce is intended (1) The an ntenna must be installed such that 20 0 cm is mainttained between the antennna and userrs, and (2) The tra ansmitter mo odule may no ot be co-locatted with any other transm mitter or anteenna. As long ass 2 conditionss above are met, further transmitter test will not be b required. H However, the e OEM integrator is still resp ponsible for testing their end-product for any addittional compliance requireements requiired with thiss module insstalled. Cet appare eil est conçu u uniquementt pour les inttégrateurs OEM dans les s conditions ssuivantes: (1)L'antenne doit être installée de telle sorte qu u'une distanc ce de 20 cm est respectéée entre l'ante enne et les utilisateurss, et (2)Le mod dule émetteur peut ne pas s être coïmp planté avec un u autre émetteur ou anteenne. Tant que les 2 conditio ons ci-dessus s sont rempl ies, des essa ais suppléme entaires sur l'émetteur ne e seront pas nécessaire es. Toutefoiss, l'intégrateu ur OEM est to oujours resp ponsable des essais sur sson produit fiinal pour toutes exigencess de conformité suppléme entaires requ uis pour ce module installlé. End Produ uct Labeling: This transmitter modulle is authoriz zed only for u use in device e where the antenna mayy be installed such that 20 0 cm may be ma aintained between the an ntenna and u users. The fin nal end product must be labeled in a visible area with the following: “Contain ns IC: 6158A--104GNIBT” Plaque sig gnalétique du u produit fina al Ce module e émetteur est e autorisé uniquement pour une utiliisation dans un dispositiff où l'antenne e peut être installée de telle sorte qu'une dista ance de 20cm m peut être maintenue en ntre l'antennee et les utilisateurs. Le prroduit final doit ê être étiqueté dans un end droit visible a avec l'inscripttion suivante: "Contient ddes IC: 6158A A-104GNIBT T". Manual Infformation To o the End User: The OEM integrator ha as to be awa are not to pro ovide informa ation to the end user regaarding how to o install or remove this RF module in the userr’s manual off the end pro oduct which in ntegrates thiis module. The end user manual shall include all required regulatory in nformation/w warning as shhow in this manual. Manuel d'iinformation à l'utilisateur final: L'intégrate eur OEM doitt être conscie ent de ne pa as fournir des s informations à l'utilisateeur final quan nt à la façon d'installer ou de supprimer ce module RF danss le manuel de d l'utilisateur du produit ffinal qui intèg gre ce module. Le manuel de l'utilisate eur final doit inclure toute es les informa ations réglem mentaires reqquises et ave ertissementss comme ind diqué dans ce c manuel.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : 45610 Create Date : 2017:12:18 14:52:08+08:00 Modify Date : 2017:12:18 14:52:08+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : 45610 Title : Microsoft Word - WSDB-104GNI(BT) user manual(20171128).docx Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.3.3 (Windows) Document ID : uuid:b44fc066-4ed1-4a06-904d-4024de7da05d Instance ID : uuid:a3d4ec94-a4ec-493d-b1af-280812e7d2b3 Page Count : 5EXIF Metadata provided by EXIF.tools